1 files changed, 35 insertions, 38 deletions

diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 4faa982807f..866b5df36ed 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -78,6 +78,8 @@ static const char* host_info(struct Scsi_Host *host)
 
 static int slave_alloc (struct scsi_device *sdev)
 {
+	struct us_data *us = host_to_us(sdev->host);
+
 	/*
 	 * Set the INQUIRY transfer length to 36.  We don't use any of
 	 * the extra data and many devices choke if asked for more or
@@ -102,6 +104,10 @@ static int slave_alloc (struct scsi_device *sdev)
 	 */
 	blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
 
+	/* Tell the SCSI layer if we know there is more than one LUN */
+	if (us->protocol == USB_PR_BULK && us->max_lun > 0)
+		sdev->sdev_bflags |= BLIST_FORCELUN;
+
 	return 0;
 }
 
@@ -211,8 +217,11 @@ static int slave_configure(struct scsi_device *sdev)
 		/*
 		 * Many devices do not respond properly to READ_CAPACITY_16.
 		 * Tell the SCSI layer to try READ_CAPACITY_10 first.
+		 * However some USB 3.0 drive enclosures return capacity
+		 * modulo 2TB. Those must use READ_CAPACITY_16
 		 */
-		sdev->try_rc_10_first = 1;
+		if (!(us->fflags & US_FL_NEEDS_CAP16))
+			sdev->try_rc_10_first = 1;
 
 		/* assume SPC3 or latter devices support sense size > 18 */
 		if (sdev->scsi_level > SCSI_SPC_2)
@@ -247,6 +256,10 @@ static int slave_configure(struct scsi_device *sdev)
 		if (us->fflags & US_FL_WRITE_CACHE)
 			sdev->wce_default_on = 1;
 
+		/* A few buggy USB-ATA bridges don't understand FUA */
+		if (us->fflags & US_FL_BROKEN_FUA)
+			sdev->broken_fua = 1;
+
 	} else {
 
 		/* Non-disk-type devices don't need to blacklist any pages
@@ -437,22 +450,21 @@ void usb_stor_report_bus_reset(struct us_data *us)
  * /proc/scsi/ functions
  ***********************************************************************/
 
+static int write_info(struct Scsi_Host *host, char *buffer, int length)
+{
+	/* if someone is sending us data, just throw it away */
+	return length;
+}
+
 /* we use this macro to help us write into the buffer */
 #undef SPRINTF
-#define SPRINTF(args...) \
-	do { if (pos < buffer+length) pos += sprintf(pos, ## args); } while (0)
+#define SPRINTF(args...) seq_printf(m, ## args)
 
-static int proc_info (struct Scsi_Host *host, char *buffer,
-		char **start, off_t offset, int length, int inout)
+static int show_info (struct seq_file *m, struct Scsi_Host *host)
 {
 	struct us_data *us = host_to_us(host);
-	char *pos = buffer;
 	const char *string;
 
-	/* if someone is sending us data, just throw it away */
-	if (inout)
-		return length;
-
 	/* print the controller name */
 	SPRINTF("   Host scsi%d: usb-storage\n", host->host_no);
 
@@ -482,28 +494,14 @@ static int proc_info (struct Scsi_Host *host, char *buffer,
 	SPRINTF("    Transport: %s\n", us->transport_name);
 
 	/* show the device flags */
-	if (pos < buffer + length) {
-		pos += sprintf(pos, "       Quirks:");
+	SPRINTF("       Quirks:");
 
 #define US_FLAG(name, value) \
-	if (us->fflags & value) pos += sprintf(pos, " " #name);
+	if (us->fflags & value) seq_printf(m, " " #name);
 US_DO_ALL_FLAGS
 #undef US_FLAG
-
-		*(pos++) = '\n';
-	}
-
-	/*
-	 * Calculate start of next buffer, and return value.
-	 */
-	*start = buffer + offset;
-
-	if ((pos - buffer) < offset)
-		return (0);
-	else if ((pos - buffer - offset) < length)
-		return (pos - buffer - offset);
-	else
-		return (length);
+	seq_putc(m, '\n');
+	return 0;
 }
 
 /***********************************************************************
@@ -511,7 +509,7 @@ US_DO_ALL_FLAGS
  ***********************************************************************/
 
 /* Output routine for the sysfs max_sectors file */
-static ssize_t show_max_sectors(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t max_sectors_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
 
@@ -519,7 +517,7 @@ static ssize_t show_max_sectors(struct device *dev, struct device_attribute *att
 }
 
 /* Input routine for the sysfs max_sectors file */
-static ssize_t store_max_sectors(struct device *dev, struct device_attribute *attr, const char *buf,
+static ssize_t max_sectors_store(struct device *dev, struct device_attribute *attr, const char *buf,
 		size_t count)
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
@@ -529,16 +527,14 @@ static ssize_t store_max_sectors(struct device *dev, struct device_attribute *at
 		blk_queue_max_hw_sectors(sdev->request_queue, ms);
 		return count;
 	}
-	return -EINVAL;	
+	return -EINVAL;
 }
-
-static DEVICE_ATTR(max_sectors, S_IRUGO | S_IWUSR, show_max_sectors,
-		store_max_sectors);
+static DEVICE_ATTR_RW(max_sectors);
 
 static struct device_attribute *sysfs_device_attr_list[] = {
-		&dev_attr_max_sectors,
-		NULL,
-		};
+	&dev_attr_max_sectors,
+	NULL,
+};
 
 /*
  * this defines our host template, with which we'll allocate hosts
@@ -548,7 +544,8 @@ struct scsi_host_template usb_stor_host_template = {
 	/* basic userland interface stuff */
 	.name =				"usb-storage",
 	.proc_name =			"usb-storage",
-	.proc_info =			proc_info,
+	.show_info =			show_info,
+	.write_info =			write_info,
 	.info =				host_info,
 
 	/* command interface -- queued only */