diff options
Diffstat (limited to 'drivers/usb/storage/isd200.c')
| -rw-r--r-- | drivers/usb/storage/isd200.c | 321 |
1 files changed, 155 insertions, 166 deletions
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 6b9982cd542..599d8bff26c 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -61,7 +61,7 @@ #include "scsiglue.h" MODULE_DESCRIPTION("Driver for In-System Design, Inc. ISD200 ASIC"); -MODULE_AUTHOR("Björn Stenberg <bjorn@haxx.se>"); +MODULE_AUTHOR("Björn Stenberg <bjorn@haxx.se>"); MODULE_LICENSE("GPL"); static int isd200_Initialization(struct us_data *us); @@ -74,16 +74,15 @@ static int isd200_Initialization(struct us_data *us); vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + .driver_info = (flags) } -struct usb_device_id isd200_usb_ids[] = { +static struct usb_device_id isd200_usb_ids[] = { # include "unusual_isd200.h" { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, isd200_usb_ids); #undef UNUSUAL_DEV -#undef USUAL_DEV /* * The flags table @@ -105,8 +104,6 @@ static struct us_unusual_dev isd200_unusual_dev_list[] = { }; #undef UNUSUAL_DEV -#undef USUAL_DEV - /* Timeout defines (in Seconds) */ @@ -499,7 +496,6 @@ static int isd200_action( struct us_data *us, int action, memset(&ata, 0, sizeof(ata)); srb->cmnd = info->cmnd; srb->device = &srb_dev; - ++srb->serial_number; ata.generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ata.generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; @@ -507,7 +503,7 @@ static int isd200_action( struct us_data *us, int action, switch ( action ) { case ACTION_READ_STATUS: - US_DEBUGP(" isd200_action(READ_STATUS)\n"); + usb_stor_dbg(us, " isd200_action(READ_STATUS)\n"); ata.generic.ActionSelect = ACTION_SELECT_0|ACTION_SELECT_2; ata.generic.RegisterSelect = REG_CYLINDER_LOW | REG_CYLINDER_HIGH | @@ -516,7 +512,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_ENUM: - US_DEBUGP(" isd200_action(ENUM,0x%02x)\n",value); + usb_stor_dbg(us, " isd200_action(ENUM,0x%02x)\n", value); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| ACTION_SELECT_3|ACTION_SELECT_4| ACTION_SELECT_5; @@ -526,7 +522,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_RESET: - US_DEBUGP(" isd200_action(RESET)\n"); + usb_stor_dbg(us, " isd200_action(RESET)\n"); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| ACTION_SELECT_3|ACTION_SELECT_4; ata.generic.RegisterSelect = REG_DEVICE_CONTROL; @@ -535,7 +531,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_REENABLE: - US_DEBUGP(" isd200_action(REENABLE)\n"); + usb_stor_dbg(us, " isd200_action(REENABLE)\n"); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| ACTION_SELECT_3|ACTION_SELECT_4; ata.generic.RegisterSelect = REG_DEVICE_CONTROL; @@ -544,7 +540,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_SOFT_RESET: - US_DEBUGP(" isd200_action(SOFT_RESET)\n"); + usb_stor_dbg(us, " isd200_action(SOFT_RESET)\n"); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_5; ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND; ata.write.DeviceHeadByte = info->DeviceHead; @@ -553,7 +549,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_IDENTIFY: - US_DEBUGP(" isd200_action(IDENTIFY)\n"); + usb_stor_dbg(us, " isd200_action(IDENTIFY)\n"); ata.generic.RegisterSelect = REG_COMMAND; ata.write.CommandByte = ATA_CMD_ID_ATA; isd200_set_srb(info, DMA_FROM_DEVICE, info->id, @@ -561,7 +557,7 @@ static int isd200_action( struct us_data *us, int action, break; default: - US_DEBUGP("Error: Undefined action %d\n",action); + usb_stor_dbg(us, "Error: Undefined action %d\n", action); return ISD200_ERROR; } @@ -571,7 +567,8 @@ static int isd200_action( struct us_data *us, int action, if (status == USB_STOR_TRANSPORT_GOOD) status = ISD200_GOOD; else { - US_DEBUGP(" isd200_action(0x%02x) error: %d\n",action,status); + usb_stor_dbg(us, " isd200_action(0x%02x) error: %d\n", + action, status); status = ISD200_ERROR; /* need to reset device here */ } @@ -593,17 +590,17 @@ static int isd200_read_regs( struct us_data *us ) int retStatus = ISD200_GOOD; int transferStatus; - US_DEBUGP("Entering isd200_IssueATAReadRegs\n"); + usb_stor_dbg(us, "Entering isd200_IssueATAReadRegs\n"); transferStatus = isd200_action( us, ACTION_READ_STATUS, info->RegsBuf, sizeof(info->ATARegs) ); if (transferStatus != ISD200_TRANSPORT_GOOD) { - US_DEBUGP(" Error reading ATA registers\n"); + usb_stor_dbg(us, " Error reading ATA registers\n"); retStatus = ISD200_ERROR; } else { memcpy(info->ATARegs, info->RegsBuf, sizeof(info->ATARegs)); - US_DEBUGP(" Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n", - info->ATARegs[ATA_REG_ERROR_OFFSET]); + usb_stor_dbg(us, " Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n", + info->ATARegs[ATA_REG_ERROR_OFFSET]); } return retStatus; @@ -633,7 +630,7 @@ static void isd200_invoke_transport( struct us_data *us, * short-circuit all other processing */ if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { - US_DEBUGP("-- command was aborted\n"); + usb_stor_dbg(us, "-- command was aborted\n"); goto Handle_Abort; } @@ -645,23 +642,23 @@ static void isd200_invoke_transport( struct us_data *us, break; case USB_STOR_TRANSPORT_NO_SENSE: - US_DEBUGP("-- transport indicates protocol failure\n"); + usb_stor_dbg(us, "-- transport indicates protocol failure\n"); srb->result = SAM_STAT_CHECK_CONDITION; return; case USB_STOR_TRANSPORT_FAILED: - US_DEBUGP("-- transport indicates command failure\n"); + usb_stor_dbg(us, "-- transport indicates command failure\n"); need_auto_sense = 1; break; case USB_STOR_TRANSPORT_ERROR: - US_DEBUGP("-- transport indicates transport error\n"); + usb_stor_dbg(us, "-- transport indicates transport error\n"); srb->result = DID_ERROR << 16; /* Need reset here */ return; default: - US_DEBUGP("-- transport indicates unknown error\n"); + usb_stor_dbg(us, "-- transport indicates unknown error\n"); srb->result = DID_ERROR << 16; /* Need reset here */ return; @@ -673,14 +670,14 @@ static void isd200_invoke_transport( struct us_data *us, (srb->cmnd[0] == MODE_SENSE) || (srb->cmnd[0] == LOG_SENSE) || (srb->cmnd[0] == MODE_SENSE_10))) { - US_DEBUGP("-- unexpectedly short transfer\n"); + usb_stor_dbg(us, "-- unexpectedly short transfer\n"); need_auto_sense = 1; } if (need_auto_sense) { result = isd200_read_regs(us); if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { - US_DEBUGP("-- auto-sense aborted\n"); + usb_stor_dbg(us, "-- auto-sense aborted\n"); goto Handle_Abort; } if (result == ISD200_GOOD) { @@ -714,40 +711,40 @@ static void isd200_invoke_transport( struct us_data *us, } #ifdef CONFIG_USB_STORAGE_DEBUG -static void isd200_log_config( struct isd200_info* info ) +static void isd200_log_config(struct us_data *us, struct isd200_info *info) { - US_DEBUGP(" Event Notification: 0x%x\n", - info->ConfigData.EventNotification); - US_DEBUGP(" External Clock: 0x%x\n", - info->ConfigData.ExternalClock); - US_DEBUGP(" ATA Init Timeout: 0x%x\n", - info->ConfigData.ATAInitTimeout); - US_DEBUGP(" ATAPI Command Block Size: 0x%x\n", - (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6); - US_DEBUGP(" Master/Slave Selection: 0x%x\n", - info->ConfigData.ATAConfig & ATACFG_MASTER); - US_DEBUGP(" ATAPI Reset: 0x%x\n", - info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET); - US_DEBUGP(" ATA Timing: 0x%x\n", - info->ConfigData.ATAConfig & ATACFG_TIMING); - US_DEBUGP(" ATA Major Command: 0x%x\n", - info->ConfigData.ATAMajorCommand); - US_DEBUGP(" ATA Minor Command: 0x%x\n", - info->ConfigData.ATAMinorCommand); - US_DEBUGP(" Init Status: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS); - US_DEBUGP(" Config Descriptor 2: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2); - US_DEBUGP(" Skip Device Boot: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT); - US_DEBUGP(" ATA 3 State Supsend: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND); - US_DEBUGP(" Descriptor Override: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE); - US_DEBUGP(" Last LUN Identifier: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN); - US_DEBUGP(" SRST Enable: 0x%x\n", - info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST); + usb_stor_dbg(us, " Event Notification: 0x%x\n", + info->ConfigData.EventNotification); + usb_stor_dbg(us, " External Clock: 0x%x\n", + info->ConfigData.ExternalClock); + usb_stor_dbg(us, " ATA Init Timeout: 0x%x\n", + info->ConfigData.ATAInitTimeout); + usb_stor_dbg(us, " ATAPI Command Block Size: 0x%x\n", + (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6); + usb_stor_dbg(us, " Master/Slave Selection: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_MASTER); + usb_stor_dbg(us, " ATAPI Reset: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET); + usb_stor_dbg(us, " ATA Timing: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_TIMING); + usb_stor_dbg(us, " ATA Major Command: 0x%x\n", + info->ConfigData.ATAMajorCommand); + usb_stor_dbg(us, " ATA Minor Command: 0x%x\n", + info->ConfigData.ATAMinorCommand); + usb_stor_dbg(us, " Init Status: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS); + usb_stor_dbg(us, " Config Descriptor 2: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2); + usb_stor_dbg(us, " Skip Device Boot: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT); + usb_stor_dbg(us, " ATA 3 State Supsend: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND); + usb_stor_dbg(us, " Descriptor Override: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE); + usb_stor_dbg(us, " Last LUN Identifier: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN); + usb_stor_dbg(us, " SRST Enable: 0x%x\n", + info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST); } #endif @@ -766,9 +763,9 @@ static int isd200_write_config( struct us_data *us ) int result; #ifdef CONFIG_USB_STORAGE_DEBUG - US_DEBUGP("Entering isd200_write_config\n"); - US_DEBUGP(" Writing the following ISD200 Config Data:\n"); - isd200_log_config(info); + usb_stor_dbg(us, "Entering isd200_write_config\n"); + usb_stor_dbg(us, " Writing the following ISD200 Config Data:\n"); + isd200_log_config(us, info); #endif /* let's send the command via the control pipe */ @@ -783,13 +780,13 @@ static int isd200_write_config( struct us_data *us ) sizeof(info->ConfigData)); if (result >= 0) { - US_DEBUGP(" ISD200 Config Data was written successfully\n"); + usb_stor_dbg(us, " ISD200 Config Data was written successfully\n"); } else { - US_DEBUGP(" Request to write ISD200 Config Data failed!\n"); + usb_stor_dbg(us, " Request to write ISD200 Config Data failed!\n"); retStatus = ISD200_ERROR; } - US_DEBUGP("Leaving isd200_write_config %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_write_config %08X\n", retStatus); return retStatus; } @@ -808,7 +805,7 @@ static int isd200_read_config( struct us_data *us ) int retStatus = ISD200_GOOD; int result; - US_DEBUGP("Entering isd200_read_config\n"); + usb_stor_dbg(us, "Entering isd200_read_config\n"); /* read the configuration information from ISD200. Use this to */ /* determine what the special ATA CDB bytes are. */ @@ -825,16 +822,16 @@ static int isd200_read_config( struct us_data *us ) if (result >= 0) { - US_DEBUGP(" Retrieved the following ISD200 Config Data:\n"); + usb_stor_dbg(us, " Retrieved the following ISD200 Config Data:\n"); #ifdef CONFIG_USB_STORAGE_DEBUG - isd200_log_config(info); + isd200_log_config(us, info); #endif } else { - US_DEBUGP(" Request to get ISD200 Config Data failed!\n"); + usb_stor_dbg(us, " Request to get ISD200 Config Data failed!\n"); retStatus = ISD200_ERROR; } - US_DEBUGP("Leaving isd200_read_config %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_read_config %08X\n", retStatus); return retStatus; } @@ -852,15 +849,15 @@ static int isd200_atapi_soft_reset( struct us_data *us ) int retStatus = ISD200_GOOD; int transferStatus; - US_DEBUGP("Entering isd200_atapi_soft_reset\n"); + usb_stor_dbg(us, "Entering isd200_atapi_soft_reset\n"); transferStatus = isd200_action( us, ACTION_SOFT_RESET, NULL, 0 ); if (transferStatus != ISD200_TRANSPORT_GOOD) { - US_DEBUGP(" Error issuing Atapi Soft Reset\n"); + usb_stor_dbg(us, " Error issuing Atapi Soft Reset\n"); retStatus = ISD200_ERROR; } - US_DEBUGP("Leaving isd200_atapi_soft_reset %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_atapi_soft_reset %08X\n", retStatus); return retStatus; } @@ -878,13 +875,13 @@ static int isd200_srst( struct us_data *us ) int retStatus = ISD200_GOOD; int transferStatus; - US_DEBUGP("Entering isd200_SRST\n"); + usb_stor_dbg(us, "Entering isd200_SRST\n"); transferStatus = isd200_action( us, ACTION_RESET, NULL, 0 ); /* check to see if this request failed */ if (transferStatus != ISD200_TRANSPORT_GOOD) { - US_DEBUGP(" Error issuing SRST\n"); + usb_stor_dbg(us, " Error issuing SRST\n"); retStatus = ISD200_ERROR; } else { /* delay 10ms to give the drive a chance to see it */ @@ -892,7 +889,7 @@ static int isd200_srst( struct us_data *us ) transferStatus = isd200_action( us, ACTION_REENABLE, NULL, 0 ); if (transferStatus != ISD200_TRANSPORT_GOOD) { - US_DEBUGP(" Error taking drive out of reset\n"); + usb_stor_dbg(us, " Error taking drive out of reset\n"); retStatus = ISD200_ERROR; } else { /* delay 50ms to give the drive a chance to recover after SRST */ @@ -900,7 +897,7 @@ static int isd200_srst( struct us_data *us ) } } - US_DEBUGP("Leaving isd200_srst %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_srst %08X\n", retStatus); return retStatus; } @@ -930,10 +927,6 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave, /* loop until we detect !BSY or timeout */ while(1) { -#ifdef CONFIG_USB_STORAGE_DEBUG - char* mstr = master_slave == ATA_ADDRESS_DEVHEAD_STD ? - "Master" : "Slave"; -#endif status = isd200_action( us, ACTION_ENUM, NULL, master_slave ); if ( status != ISD200_GOOD ) @@ -946,9 +939,13 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave, if (!detect) { if (regs[ATA_REG_STATUS_OFFSET] & ATA_BUSY) { - US_DEBUGP(" %s status is still BSY, try again...\n",mstr); + usb_stor_dbg(us, " %s status is still BSY, try again...\n", + master_slave == ATA_ADDRESS_DEVHEAD_STD ? + "Master" : "Slave"); } else { - US_DEBUGP(" %s status !BSY, continue with next operation\n",mstr); + usb_stor_dbg(us, " %s status !BSY, continue with next operation\n", + master_slave == ATA_ADDRESS_DEVHEAD_STD ? + "Master" : "Slave"); break; } } @@ -957,11 +954,11 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave, /* ATA_ERR (workaround for Archos CD-ROM) */ else if (regs[ATA_REG_STATUS_OFFSET] & (ATA_BUSY | ATA_DF | ATA_ERR)) { - US_DEBUGP(" Status indicates it is not ready, try again...\n"); + usb_stor_dbg(us, " Status indicates it is not ready, try again...\n"); } /* check for DRDY, ATA devices set DRDY after SRST */ else if (regs[ATA_REG_STATUS_OFFSET] & ATA_DRDY) { - US_DEBUGP(" Identified ATA device\n"); + usb_stor_dbg(us, " Identified ATA device\n"); info->DeviceFlags |= DF_ATA_DEVICE; info->DeviceHead = master_slave; break; @@ -982,27 +979,27 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave, */ if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) && !recheckAsMaster) { - US_DEBUGP(" Identified ATAPI device as slave. Rechecking again as master\n"); + usb_stor_dbg(us, " Identified ATAPI device as slave. Rechecking again as master\n"); recheckAsMaster = 1; master_slave = ATA_ADDRESS_DEVHEAD_STD; } else { - US_DEBUGP(" Identified ATAPI device\n"); + usb_stor_dbg(us, " Identified ATAPI device\n"); info->DeviceHead = master_slave; status = isd200_atapi_soft_reset(us); break; } } else { - US_DEBUGP(" Not ATA, not ATAPI. Weird.\n"); + usb_stor_dbg(us, " Not ATA, not ATAPI - Weird\n"); break; } /* check for timeout on this request */ if (time_after_eq(jiffies, endTime)) { if (!detect) - US_DEBUGP(" BSY check timeout, just continue with next operation...\n"); + usb_stor_dbg(us, " BSY check timeout, just continue with next operation...\n"); else - US_DEBUGP(" Device detect timeout!\n"); + usb_stor_dbg(us, " Device detect timeout!\n"); break; } } @@ -1024,7 +1021,7 @@ static int isd200_manual_enum(struct us_data *us) struct isd200_info *info = (struct isd200_info *)us->extra; int retStatus = ISD200_GOOD; - US_DEBUGP("Entering isd200_manual_enum\n"); + usb_stor_dbg(us, "Entering isd200_manual_enum\n"); retStatus = isd200_read_config(us); if (retStatus == ISD200_GOOD) { @@ -1043,14 +1040,15 @@ static int isd200_manual_enum(struct us_data *us) isslave = (info->DeviceHead & ATA_ADDRESS_DEVHEAD_SLAVE) ? 1 : 0; if (!(info->ConfigData.ATAConfig & ATACFG_MASTER)) { - US_DEBUGP(" Setting Master/Slave selection to %d\n", isslave); + usb_stor_dbg(us, " Setting Master/Slave selection to %d\n", + isslave); info->ConfigData.ATAConfig &= 0x3f; info->ConfigData.ATAConfig |= (isslave<<6); retStatus = isd200_write_config(us); } } - US_DEBUGP("Leaving isd200_manual_enum %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_manual_enum %08X\n", retStatus); return(retStatus); } @@ -1068,35 +1066,35 @@ static void isd200_fix_driveid(u16 *id) #endif } -static void isd200_dump_driveid(u16 *id) +static void isd200_dump_driveid(struct us_data *us, u16 *id) { - US_DEBUGP(" Identify Data Structure:\n"); - US_DEBUGP(" config = 0x%x\n", id[ATA_ID_CONFIG]); - US_DEBUGP(" cyls = 0x%x\n", id[ATA_ID_CYLS]); - US_DEBUGP(" heads = 0x%x\n", id[ATA_ID_HEADS]); - US_DEBUGP(" track_bytes = 0x%x\n", id[4]); - US_DEBUGP(" sector_bytes = 0x%x\n", id[5]); - US_DEBUGP(" sectors = 0x%x\n", id[ATA_ID_SECTORS]); - US_DEBUGP(" serial_no[0] = 0x%x\n", *(char *)&id[ATA_ID_SERNO]); - US_DEBUGP(" buf_type = 0x%x\n", id[20]); - US_DEBUGP(" buf_size = 0x%x\n", id[ATA_ID_BUF_SIZE]); - US_DEBUGP(" ecc_bytes = 0x%x\n", id[22]); - US_DEBUGP(" fw_rev[0] = 0x%x\n", *(char *)&id[ATA_ID_FW_REV]); - US_DEBUGP(" model[0] = 0x%x\n", *(char *)&id[ATA_ID_PROD]); - US_DEBUGP(" max_multsect = 0x%x\n", id[ATA_ID_MAX_MULTSECT] & 0xff); - US_DEBUGP(" dword_io = 0x%x\n", id[ATA_ID_DWORD_IO]); - US_DEBUGP(" capability = 0x%x\n", id[ATA_ID_CAPABILITY] >> 8); - US_DEBUGP(" tPIO = 0x%x\n", id[ATA_ID_OLD_PIO_MODES] >> 8); - US_DEBUGP(" tDMA = 0x%x\n", id[ATA_ID_OLD_DMA_MODES] >> 8); - US_DEBUGP(" field_valid = 0x%x\n", id[ATA_ID_FIELD_VALID]); - US_DEBUGP(" cur_cyls = 0x%x\n", id[ATA_ID_CUR_CYLS]); - US_DEBUGP(" cur_heads = 0x%x\n", id[ATA_ID_CUR_HEADS]); - US_DEBUGP(" cur_sectors = 0x%x\n", id[ATA_ID_CUR_SECTORS]); - US_DEBUGP(" cur_capacity = 0x%x\n", ata_id_u32(id, 57)); - US_DEBUGP(" multsect = 0x%x\n", id[ATA_ID_MULTSECT] & 0xff); - US_DEBUGP(" lba_capacity = 0x%x\n", ata_id_u32(id, ATA_ID_LBA_CAPACITY)); - US_DEBUGP(" command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]); - US_DEBUGP(" command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]); + usb_stor_dbg(us, " Identify Data Structure:\n"); + usb_stor_dbg(us, " config = 0x%x\n", id[ATA_ID_CONFIG]); + usb_stor_dbg(us, " cyls = 0x%x\n", id[ATA_ID_CYLS]); + usb_stor_dbg(us, " heads = 0x%x\n", id[ATA_ID_HEADS]); + usb_stor_dbg(us, " track_bytes = 0x%x\n", id[4]); + usb_stor_dbg(us, " sector_bytes = 0x%x\n", id[5]); + usb_stor_dbg(us, " sectors = 0x%x\n", id[ATA_ID_SECTORS]); + usb_stor_dbg(us, " serial_no[0] = 0x%x\n", *(char *)&id[ATA_ID_SERNO]); + usb_stor_dbg(us, " buf_type = 0x%x\n", id[20]); + usb_stor_dbg(us, " buf_size = 0x%x\n", id[ATA_ID_BUF_SIZE]); + usb_stor_dbg(us, " ecc_bytes = 0x%x\n", id[22]); + usb_stor_dbg(us, " fw_rev[0] = 0x%x\n", *(char *)&id[ATA_ID_FW_REV]); + usb_stor_dbg(us, " model[0] = 0x%x\n", *(char *)&id[ATA_ID_PROD]); + usb_stor_dbg(us, " max_multsect = 0x%x\n", id[ATA_ID_MAX_MULTSECT] & 0xff); + usb_stor_dbg(us, " dword_io = 0x%x\n", id[ATA_ID_DWORD_IO]); + usb_stor_dbg(us, " capability = 0x%x\n", id[ATA_ID_CAPABILITY] >> 8); + usb_stor_dbg(us, " tPIO = 0x%x\n", id[ATA_ID_OLD_PIO_MODES] >> 8); + usb_stor_dbg(us, " tDMA = 0x%x\n", id[ATA_ID_OLD_DMA_MODES] >> 8); + usb_stor_dbg(us, " field_valid = 0x%x\n", id[ATA_ID_FIELD_VALID]); + usb_stor_dbg(us, " cur_cyls = 0x%x\n", id[ATA_ID_CUR_CYLS]); + usb_stor_dbg(us, " cur_heads = 0x%x\n", id[ATA_ID_CUR_HEADS]); + usb_stor_dbg(us, " cur_sectors = 0x%x\n", id[ATA_ID_CUR_SECTORS]); + usb_stor_dbg(us, " cur_capacity = 0x%x\n", ata_id_u32(id, 57)); + usb_stor_dbg(us, " multsect = 0x%x\n", id[ATA_ID_MULTSECT] & 0xff); + usb_stor_dbg(us, " lba_capacity = 0x%x\n", ata_id_u32(id, ATA_ID_LBA_CAPACITY)); + usb_stor_dbg(us, " command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]); + usb_stor_dbg(us, " command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]); } /************************************************************************** @@ -1113,7 +1111,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) int retStatus = ISD200_GOOD; u16 *id = info->id; - US_DEBUGP("Entering isd200_get_inquiry_data\n"); + usb_stor_dbg(us, "Entering isd200_get_inquiry_data\n"); /* set default to Master */ info->DeviceHead = ATA_ADDRESS_DEVHEAD_STD; @@ -1131,7 +1129,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) id, ATA_ID_WORDS * 2); if (transferStatus != ISD200_TRANSPORT_GOOD) { /* Error issuing ATA Command Identify */ - US_DEBUGP(" Error issuing ATA Command Identify\n"); + usb_stor_dbg(us, " Error issuing ATA Command Identify\n"); retStatus = ISD200_ERROR; } else { /* ATA Command Identify successful */ @@ -1140,7 +1138,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) __u16 *dest; isd200_fix_driveid(id); - isd200_dump_driveid(id); + isd200_dump_driveid(us, id); memset(&info->InquiryData, 0, sizeof(info->InquiryData)); @@ -1174,7 +1172,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) /* determine if it supports Media Status Notification */ if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) { - US_DEBUGP(" Device supports Media Status Notification\n"); + usb_stor_dbg(us, " Device supports Media Status Notification\n"); /* Indicate that it is enabled, even though it is not * This allows the lock/unlock of the media to work @@ -1194,7 +1192,8 @@ static int isd200_get_inquiry_data( struct us_data *us ) us->protocol_name = "Transparent SCSI"; us->proto_handler = usb_stor_transparent_scsi_command; - US_DEBUGP("Protocol changed to: %s\n", us->protocol_name); + usb_stor_dbg(us, "Protocol changed to: %s\n", + us->protocol_name); /* Free driver structure */ us->extra_destructor(info); @@ -1204,7 +1203,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) } } - US_DEBUGP("Leaving isd200_get_inquiry_data %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_get_inquiry_data %08X\n", retStatus); return(retStatus); } @@ -1235,7 +1234,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, /* SCSI Command */ switch (srb->cmnd[0]) { case INQUIRY: - US_DEBUGP(" ATA OUT - INQUIRY\n"); + usb_stor_dbg(us, " ATA OUT - INQUIRY\n"); /* copy InquiryData */ usb_stor_set_xfer_buf((unsigned char *) &info->InquiryData, @@ -1245,7 +1244,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, break; case MODE_SENSE: - US_DEBUGP(" ATA OUT - SCSIOP_MODE_SENSE\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_MODE_SENSE\n"); /* Initialize the return buffer */ usb_stor_set_xfer_buf(senseData, sizeof(senseData), srb); @@ -1259,14 +1258,14 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; isd200_srb_set_bufflen(srb, 0); } else { - US_DEBUGP(" Media Status not supported, just report okay\n"); + usb_stor_dbg(us, " Media Status not supported, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } break; case TEST_UNIT_READY: - US_DEBUGP(" ATA OUT - SCSIOP_TEST_UNIT_READY\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_TEST_UNIT_READY\n"); if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED) { @@ -1277,7 +1276,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; isd200_srb_set_bufflen(srb, 0); } else { - US_DEBUGP(" Media Status not supported, just report okay\n"); + usb_stor_dbg(us, " Media Status not supported, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } @@ -1288,7 +1287,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, unsigned long capacity; struct read_capacity_data readCapacityData; - US_DEBUGP(" ATA OUT - SCSIOP_READ_CAPACITY\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_READ_CAPACITY\n"); if (ata_id_has_lba(id)) capacity = ata_id_u32(id, ATA_ID_LBA_CAPACITY) - 1; @@ -1307,7 +1306,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, break; case READ_10: - US_DEBUGP(" ATA OUT - SCSIOP_READ\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_READ\n"); lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]); blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8]; @@ -1339,7 +1338,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, break; case WRITE_10: - US_DEBUGP(" ATA OUT - SCSIOP_WRITE\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_WRITE\n"); lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]); blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8]; @@ -1371,10 +1370,11 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, break; case ALLOW_MEDIUM_REMOVAL: - US_DEBUGP(" ATA OUT - SCSIOP_MEDIUM_REMOVAL\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_MEDIUM_REMOVAL\n"); if (info->DeviceFlags & DF_REMOVABLE_MEDIA) { - US_DEBUGP(" srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); + usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n", + srb->cmnd[4]); ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; @@ -1384,25 +1384,25 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK; isd200_srb_set_bufflen(srb, 0); } else { - US_DEBUGP(" Not removeable media, just report okay\n"); + usb_stor_dbg(us, " Not removeable media, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } break; case START_STOP: - US_DEBUGP(" ATA OUT - SCSIOP_START_STOP_UNIT\n"); - US_DEBUGP(" srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); + usb_stor_dbg(us, " ATA OUT - SCSIOP_START_STOP_UNIT\n"); + usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); if ((srb->cmnd[4] & 0x3) == 0x2) { - US_DEBUGP(" Media Eject\n"); + usb_stor_dbg(us, " Media Eject\n"); ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; ataCdb->generic.TransferBlockSize = 0; ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = ATA_COMMAND_MEDIA_EJECT; } else if ((srb->cmnd[4] & 0x3) == 0x1) { - US_DEBUGP(" Get Media Status\n"); + usb_stor_dbg(us, " Get Media Status\n"); ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; ataCdb->generic.TransferBlockSize = 1; @@ -1410,14 +1410,15 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; isd200_srb_set_bufflen(srb, 0); } else { - US_DEBUGP(" Nothing to do, just report okay\n"); + usb_stor_dbg(us, " Nothing to do, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } break; default: - US_DEBUGP("Unsupported SCSI command - 0x%X\n", srb->cmnd[0]); + usb_stor_dbg(us, "Unsupported SCSI command - 0x%X\n", + srb->cmnd[0]); srb->result = DID_ERROR << 16; sendToTransport = 0; break; @@ -1461,8 +1462,7 @@ static int isd200_init_info(struct us_data *us) retStatus = ISD200_ERROR; else { info->id = kzalloc(ATA_ID_WORDS * 2, GFP_KERNEL); - info->RegsBuf = (unsigned char *) - kmalloc(sizeof(info->ATARegs), GFP_KERNEL); + info->RegsBuf = kmalloc(sizeof(info->ATARegs), GFP_KERNEL); info->srb.sense_buffer = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); if (!info->id || !info->RegsBuf || !info->srb.sense_buffer) { @@ -1475,8 +1475,7 @@ static int isd200_init_info(struct us_data *us) if (retStatus == ISD200_GOOD) { us->extra = info; us->extra_destructor = isd200_free_info_ptrs; - } else - US_DEBUGP("ERROR - kmalloc failure\n"); + } return retStatus; } @@ -1487,19 +1486,19 @@ static int isd200_init_info(struct us_data *us) static int isd200_Initialization(struct us_data *us) { - US_DEBUGP("ISD200 Initialization...\n"); + usb_stor_dbg(us, "ISD200 Initialization...\n"); /* Initialize ISD200 info struct */ if (isd200_init_info(us) == ISD200_ERROR) { - US_DEBUGP("ERROR Initializing ISD200 Info struct\n"); + usb_stor_dbg(us, "ERROR Initializing ISD200 Info struct\n"); } else { /* Get device specific data */ if (isd200_get_inquiry_data(us) != ISD200_GOOD) - US_DEBUGP("ISD200 Initialization Failure\n"); + usb_stor_dbg(us, "ISD200 Initialization Failure\n"); else - US_DEBUGP("ISD200 Initialization complete\n"); + usb_stor_dbg(us, "ISD200 Initialization complete\n"); } return 0; @@ -1510,7 +1509,7 @@ static int isd200_Initialization(struct us_data *us) * Protocol and Transport for the ISD200 ASIC * * This protocol and transport are for ATA devices connected to an ISD200 - * ASIC. An ATAPI device that is conected as a slave device will be + * ASIC. An ATAPI device that is connected as a slave device will be * detected in the driver initialization function and the protocol will * be changed to an ATAPI protocol (Transparent SCSI). * @@ -1524,7 +1523,7 @@ static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) /* Make sure driver was initialized */ if (us->extra == NULL) - US_DEBUGP("ERROR Driver not initialized\n"); + usb_stor_dbg(us, "ERROR Driver not initialized\n"); scsi_set_resid(srb, 0); /* scsi_bufflen might change in protocol translation to ata */ @@ -1567,17 +1566,7 @@ static struct usb_driver isd200_driver = { .post_reset = usb_stor_post_reset, .id_table = isd200_usb_ids, .soft_unbind = 1, + .no_dynamic_id = 1, }; -static int __init isd200_init(void) -{ - return usb_register(&isd200_driver); -} - -static void __exit isd200_exit(void) -{ - usb_deregister(&isd200_driver); -} - -module_init(isd200_init); -module_exit(isd200_exit); +module_usb_driver(isd200_driver); |