diff options
Diffstat (limited to 'drivers/usb/storage/Kconfig')
| -rw-r--r-- | drivers/usb/storage/Kconfig | 105 |
1 files changed, 78 insertions, 27 deletions
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 9df6887b91f..13b5bfbaf95 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -2,13 +2,12 @@ # USB Storage driver configuration # -comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;" -comment "see USB_STORAGE Help for more information" - depends on USB +comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" +comment "also be needed; see USB_STORAGE Help for more info" config USB_STORAGE tristate "USB Mass Storage support" - depends on USB && SCSI + depends on SCSI ---help--- Say Y here if you want to connect USB mass storage devices to your computer's USB port. This is the driver you need for USB @@ -19,7 +18,9 @@ config USB_STORAGE This option depends on 'SCSI' support being enabled, but you probably also need 'SCSI device support: SCSI disk support' - (BLK_DEV_SD) for most USB storage devices. + (BLK_DEV_SD) for most USB storage devices. Some devices also + will require 'Probe all LUNs on each SCSI device' + (SCSI_MULTI_LUN). To compile this driver as a module, choose M here: the module will be called usb-storage. @@ -31,22 +32,40 @@ config USB_STORAGE_DEBUG Say Y here in order to have the USB Mass Storage code generate verbose debugging messages. +config USB_STORAGE_REALTEK + tristate "Realtek Card Reader support" + depends on USB_STORAGE + help + Say Y here to include additional code to support the power-saving function + for Realtek RTS51xx USB card readers. + + If this driver is compiled as a module, it will be named ums-realtek. + +config REALTEK_AUTOPM + bool "Realtek Card Reader autosuspend support" + depends on USB_STORAGE_REALTEK && PM_RUNTIME + default y + config USB_STORAGE_DATAFAB - bool "Datafab Compact Flash Reader support" + tristate "Datafab Compact Flash Reader support" depends on USB_STORAGE help Support for certain Datafab CompactFlash readers. - Datafab has a web page at <http://www.datafabusa.com/>. + Datafab has a web page at <http://www.datafab.com/>. + + If this driver is compiled as a module, it will be named ums-datafab. config USB_STORAGE_FREECOM - bool "Freecom USB/ATAPI Bridge support" + tristate "Freecom USB/ATAPI Bridge support" depends on USB_STORAGE help Support for the Freecom USB to IDE/ATAPI adaptor. Freecom has a web page at <http://www.freecom.de/>. + If this driver is compiled as a module, it will be named ums-freecom. + config USB_STORAGE_ISD200 - bool "ISD-200 USB/ATA Bridge support" + tristate "ISD-200 USB/ATA Bridge support" depends on USB_STORAGE ---help--- Say Y here if you want to use USB Mass Store devices based @@ -61,8 +80,10 @@ config USB_STORAGE_ISD200 - CyQ've CQ8060A CDRW drive - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) + If this driver is compiled as a module, it will be named ums-isd200. + config USB_STORAGE_USBAT - bool "USBAT/USBAT02-based storage support" + tristate "USBAT/USBAT02-based storage support" depends on USB_STORAGE help Say Y here to include additional code to support storage devices @@ -82,30 +103,38 @@ config USB_STORAGE_USBAT - RCA LYRA MP3 portable - Sandisk ImageMate SDDR-05b + If this driver is compiled as a module, it will be named ums-usbat. + config USB_STORAGE_SDDR09 - bool "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" + tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" depends on USB_STORAGE help Say Y here to include additional code to support the Sandisk SDDR-09 SmartMedia reader in the USB Mass Storage driver. Also works for the Microtech Zio! CompactFlash/SmartMedia reader. + If this driver is compiled as a module, it will be named ums-sddr09. + config USB_STORAGE_SDDR55 - bool "SanDisk SDDR-55 SmartMedia support" + tristate "SanDisk SDDR-55 SmartMedia support" depends on USB_STORAGE help Say Y here to include additional code to support the Sandisk SDDR-55 SmartMedia reader in the USB Mass Storage driver. + If this driver is compiled as a module, it will be named ums-sddr55. + config USB_STORAGE_JUMPSHOT - bool "Lexar Jumpshot Compact Flash Reader" + tristate "Lexar Jumpshot Compact Flash Reader" depends on USB_STORAGE help Say Y here to include additional code to support the Lexar Jumpshot USB CompactFlash reader. + If this driver is compiled as a module, it will be named ums-jumpshot. + config USB_STORAGE_ALAUDA - bool "Olympus MAUSB-10/Fuji DPC-R1 support" + tristate "Olympus MAUSB-10/Fuji DPC-R1 support" depends on USB_STORAGE help Say Y here to include additional code to support the Olympus MAUSB-10 @@ -114,8 +143,10 @@ config USB_STORAGE_ALAUDA These devices are based on the Alauda chip and support both XD and SmartMedia cards. + If this driver is compiled as a module, it will be named ums-alauda. + config USB_STORAGE_ONETOUCH - bool "Support OneTouch Button on Maxtor Hard Drives" + tristate "Support OneTouch Button on Maxtor Hard Drives" depends on USB_STORAGE depends on INPUT=y || INPUT=USB_STORAGE help @@ -127,8 +158,10 @@ config USB_STORAGE_ONETOUCH this input in any keybinding software. (e.g. gnome's keyboard short- cuts) + If this driver is compiled as a module, it will be named ums-onetouch. + config USB_STORAGE_KARMA - bool "Support for Rio Karma music player" + tristate "Support for Rio Karma music player" depends on USB_STORAGE help Say Y here to include additional code to support the Rio Karma @@ -139,8 +172,10 @@ config USB_STORAGE_KARMA on the resulting scsi device node returns the Karma to normal operation. + If this driver is compiled as a module, it will be named ums-karma. + config USB_STORAGE_CYPRESS_ATACB - bool "SAT emulation on Cypress USB/ATA Bridge with ATACB" + tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" depends on USB_STORAGE ---help--- Say Y here if you want to use SAT (ata pass through) on devices based @@ -150,16 +185,32 @@ config USB_STORAGE_CYPRESS_ATACB If you say no here your device will still work with the standard usb mass storage class. -config USB_LIBUSUAL - bool "The shared table of common (or usual) storage devices" - depends on USB - help - This module contains a table of common (or usual) devices - for usb-storage and ub drivers, and allows to switch binding - of these devices without rebuilding modules. + If this driver is compiled as a module, it will be named ums-cypress. - Typical syntax of /etc/modprobe.conf is: +config USB_STORAGE_ENE_UB6250 + tristate "USB ENE card reader support" + depends on SCSI + depends on USB_STORAGE + ---help--- + Say Y here if you wish to control a ENE SD/MS Card reader. + To use SM card, please build driver/staging/keucr/keucr.ko + + This option depends on 'SCSI' support being enabled, but you + probably also need 'SCSI device support: SCSI disk support' + (BLK_DEV_SD) for most USB storage devices. + + To compile this driver as a module, choose M here: the + module will be called ums-eneub6250. + +config USB_UAS + tristate "USB Attached SCSI" + depends on SCSI && USB_STORAGE + help + The USB Attached SCSI protocol is supported by some USB + storage devices. It permits higher performance by supporting + multiple outstanding commands. - options libusual bias="ub" + If you don't know whether you have a UAS device, it is safe to + say 'Y' or 'M' here and the kernel will use the right driver. - If unsure, say N. + If you compile this driver as a module, it will be named uas. |