diff options
Diffstat (limited to 'drivers/usb/storage/Kconfig')
| -rw-r--r-- | drivers/usb/storage/Kconfig | 150 |
1 files changed, 108 insertions, 42 deletions
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index be9eec22574..13b5bfbaf95 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -2,14 +2,12 @@ # USB Storage driver configuration # -comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'" -comment "may also be needed; see USB_STORAGE Help for more information" - depends on USB +comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" +comment "also be needed; see USB_STORAGE Help for more info" config USB_STORAGE tristate "USB Mass Storage support" - depends on USB - select SCSI + depends on SCSI ---help--- Say Y here if you want to connect USB mass storage devices to your computer's USB port. This is the driver you need for USB @@ -18,9 +16,11 @@ config USB_STORAGE similar devices. This driver may also be used for some cameras and card readers. - This option 'selects' (turns on, enables) 'SCSI', but you + This option depends on 'SCSI' support being enabled, but you probably also need 'SCSI device support: SCSI disk support' - (BLK_DEV_SD) for most USB storage devices. + (BLK_DEV_SD) for most USB storage devices. Some devices also + will require 'Probe all LUNs on each SCSI device' + (SCSI_MULTI_LUN). To compile this driver as a module, choose M here: the module will be called usb-storage. @@ -32,24 +32,41 @@ config USB_STORAGE_DEBUG Say Y here in order to have the USB Mass Storage code generate verbose debugging messages. +config USB_STORAGE_REALTEK + tristate "Realtek Card Reader support" + depends on USB_STORAGE + help + Say Y here to include additional code to support the power-saving function + for Realtek RTS51xx USB card readers. + + If this driver is compiled as a module, it will be named ums-realtek. + +config REALTEK_AUTOPM + bool "Realtek Card Reader autosuspend support" + depends on USB_STORAGE_REALTEK && PM_RUNTIME + default y + config USB_STORAGE_DATAFAB - bool "Datafab Compact Flash Reader support (EXPERIMENTAL)" - depends on USB_STORAGE && EXPERIMENTAL + tristate "Datafab Compact Flash Reader support" + depends on USB_STORAGE help Support for certain Datafab CompactFlash readers. - Datafab has a web page at <http://www.datafabusa.com/>. + Datafab has a web page at <http://www.datafab.com/>. + + If this driver is compiled as a module, it will be named ums-datafab. config USB_STORAGE_FREECOM - bool "Freecom USB/ATAPI Bridge support" + tristate "Freecom USB/ATAPI Bridge support" depends on USB_STORAGE help Support for the Freecom USB to IDE/ATAPI adaptor. Freecom has a web page at <http://www.freecom.de/>. + If this driver is compiled as a module, it will be named ums-freecom. + config USB_STORAGE_ISD200 - bool "ISD-200 USB/ATA Bridge support" + tristate "ISD-200 USB/ATA Bridge support" depends on USB_STORAGE - depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE ---help--- Say Y here if you want to use USB Mass Store devices based on the In-Systems Design ISD-200 USB/ATA bridge. @@ -63,16 +80,11 @@ config USB_STORAGE_ISD200 - CyQ've CQ8060A CDRW drive - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) -config USB_STORAGE_DPCM - bool "Microtech/ZiO! CompactFlash/SmartMedia support" - depends on USB_STORAGE - help - Say Y here to support the Microtech/ZiO! CompactFlash reader. - There is a web page at <http://www.ziocorp.com/products/>. + If this driver is compiled as a module, it will be named ums-isd200. config USB_STORAGE_USBAT - bool "USBAT/USBAT02-based storage support (EXPERIMENTAL)" - depends on USB_STORAGE && EXPERIMENTAL + tristate "USBAT/USBAT02-based storage support" + depends on USB_STORAGE help Say Y here to include additional code to support storage devices based on the SCM/Shuttle USBAT/USBAT02 processors. @@ -91,41 +103,52 @@ config USB_STORAGE_USBAT - RCA LYRA MP3 portable - Sandisk ImageMate SDDR-05b + If this driver is compiled as a module, it will be named ums-usbat. + config USB_STORAGE_SDDR09 - bool "SanDisk SDDR-09 (and other SmartMedia) support (EXPERIMENTAL)" - depends on USB_STORAGE && EXPERIMENTAL + tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" + depends on USB_STORAGE help Say Y here to include additional code to support the Sandisk SDDR-09 SmartMedia reader in the USB Mass Storage driver. - Also works for the Microtech Zio! SmartMedia reader. + Also works for the Microtech Zio! CompactFlash/SmartMedia reader. + + If this driver is compiled as a module, it will be named ums-sddr09. config USB_STORAGE_SDDR55 - bool "SanDisk SDDR-55 SmartMedia support (EXPERIMENTAL)" - depends on USB_STORAGE && EXPERIMENTAL + tristate "SanDisk SDDR-55 SmartMedia support" + depends on USB_STORAGE help Say Y here to include additional code to support the Sandisk SDDR-55 SmartMedia reader in the USB Mass Storage driver. + If this driver is compiled as a module, it will be named ums-sddr55. + config USB_STORAGE_JUMPSHOT - bool "Lexar Jumpshot Compact Flash Reader (EXPERIMENTAL)" - depends on USB_STORAGE && EXPERIMENTAL + tristate "Lexar Jumpshot Compact Flash Reader" + depends on USB_STORAGE help Say Y here to include additional code to support the Lexar Jumpshot USB CompactFlash reader. + If this driver is compiled as a module, it will be named ums-jumpshot. + config USB_STORAGE_ALAUDA - bool "Olympus MAUSB-10/Fuji DPC-R1 support (EXPERIMENTAL)" - depends on USB_STORAGE && EXPERIMENTAL + tristate "Olympus MAUSB-10/Fuji DPC-R1 support" + depends on USB_STORAGE help Say Y here to include additional code to support the Olympus MAUSB-10 and Fujifilm DPC-R1 USB Card reader/writer devices. - These devices are based on the Alauda chip and support support both + These devices are based on the Alauda chip and support both XD and SmartMedia cards. + If this driver is compiled as a module, it will be named ums-alauda. + config USB_STORAGE_ONETOUCH - bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)" - depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL && !PM + tristate "Support OneTouch Button on Maxtor Hard Drives" + depends on USB_STORAGE + depends on INPUT=y || INPUT=USB_STORAGE help Say Y here to include additional code to support the Maxtor OneTouch USB hard drive's onetouch button. @@ -135,16 +158,59 @@ config USB_STORAGE_ONETOUCH this input in any keybinding software. (e.g. gnome's keyboard short- cuts) -config USB_LIBUSUAL - bool "The shared table of common (or usual) storage devices" - depends on USB + If this driver is compiled as a module, it will be named ums-onetouch. + +config USB_STORAGE_KARMA + tristate "Support for Rio Karma music player" + depends on USB_STORAGE help - This module contains a table of common (or usual) devices - for usb-storage and ub drivers, and allows to switch binding - of these devices without rebuilding modules. + Say Y here to include additional code to support the Rio Karma + USB interface. + + This code places the Rio Karma into mass storage mode, enabling + it to be mounted as an ordinary filesystem. Performing an eject + on the resulting scsi device node returns the Karma to normal + operation. + + If this driver is compiled as a module, it will be named ums-karma. + +config USB_STORAGE_CYPRESS_ATACB + tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" + depends on USB_STORAGE + ---help--- + Say Y here if you want to use SAT (ata pass through) on devices based + on the Cypress USB/ATA bridge supporting ATACB. This will allow you + to use tools to tune and monitor your drive (like hdparm or smartctl). + + If you say no here your device will still work with the standard usb + mass storage class. - Typical syntax of /etc/modprobe.conf is: + If this driver is compiled as a module, it will be named ums-cypress. + +config USB_STORAGE_ENE_UB6250 + tristate "USB ENE card reader support" + depends on SCSI + depends on USB_STORAGE + ---help--- + Say Y here if you wish to control a ENE SD/MS Card reader. + To use SM card, please build driver/staging/keucr/keucr.ko + + This option depends on 'SCSI' support being enabled, but you + probably also need 'SCSI device support: SCSI disk support' + (BLK_DEV_SD) for most USB storage devices. + + To compile this driver as a module, choose M here: the + module will be called ums-eneub6250. + +config USB_UAS + tristate "USB Attached SCSI" + depends on SCSI && USB_STORAGE + help + The USB Attached SCSI protocol is supported by some USB + storage devices. It permits higher performance by supporting + multiple outstanding commands. - options libusual bias="ub" + If you don't know whether you have a UAS device, it is safe to + say 'Y' or 'M' here and the kernel will use the right driver. - If unsure, say N. + If you compile this driver as a module, it will be named uas. |