aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/ch341.c23
-rw-r--r--drivers/usb/serial/digi_acceleport.c117
-rw-r--r--drivers/usb/serial/ipw.c7
-rw-r--r--drivers/usb/serial/keyspan.c181
-rw-r--r--drivers/usb/serial/keyspan.h8
-rw-r--r--drivers/usb/serial/mct_u232.c59
-rw-r--r--drivers/usb/serial/metro-usb.c65
-rw-r--r--drivers/usb/serial/mos7720.c62
-rw-r--r--drivers/usb/serial/mos7840.c495
-rw-r--r--drivers/usb/serial/omninet.c36
-rw-r--r--drivers/usb/serial/opticon.c11
-rw-r--r--drivers/usb/serial/option.c23
-rw-r--r--drivers/usb/serial/qcserial.c33
-rw-r--r--drivers/usb/serial/quatech2.c135
-rw-r--r--drivers/usb/serial/sierra.c133
-rw-r--r--drivers/usb/serial/usb-wwan.h2
-rw-r--r--drivers/usb/serial/usb_wwan.c124
-rw-r--r--drivers/usb/serial/whiteheat.c60
18 files changed, 744 insertions, 830 deletions
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index e9c7046ae35..d255f66e708 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -242,13 +242,11 @@ out: kfree(buffer);
return r;
}
-/* allocate private data */
-static int ch341_attach(struct usb_serial *serial)
+static int ch341_port_probe(struct usb_serial_port *port)
{
struct ch341_private *priv;
int r;
- /* private data */
priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
@@ -258,17 +256,27 @@ static int ch341_attach(struct usb_serial *serial)
priv->baud_rate = DEFAULT_BAUD_RATE;
priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
- r = ch341_configure(serial->dev, priv);
+ r = ch341_configure(port->serial->dev, priv);
if (r < 0)
goto error;
- usb_set_serial_port_data(serial->port[0], priv);
+ usb_set_serial_port_data(port, priv);
return 0;
error: kfree(priv);
return r;
}
+static int ch341_port_remove(struct usb_serial_port *port)
+{
+ struct ch341_private *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
+}
+
static int ch341_carrier_raised(struct usb_serial_port *port)
{
struct ch341_private *priv = usb_get_serial_port_data(port);
@@ -304,7 +312,7 @@ static void ch341_close(struct usb_serial_port *port)
static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
- struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
+ struct ch341_private *priv = usb_get_serial_port_data(port);
int r;
priv->baud_rate = DEFAULT_BAUD_RATE;
@@ -608,7 +616,8 @@ static struct usb_serial_driver ch341_device = {
.tiocmget = ch341_tiocmget,
.tiocmset = ch341_tiocmset,
.read_int_callback = ch341_read_int_callback,
- .attach = ch341_attach,
+ .port_probe = ch341_port_probe,
+ .port_remove = ch341_port_remove,
.reset_resume = ch341_reset_resume,
};
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index c86f68c6b07..b50fa1c6d88 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -244,6 +244,8 @@ static int digi_startup_device(struct usb_serial *serial);
static int digi_startup(struct usb_serial *serial);
static void digi_disconnect(struct usb_serial *serial);
static void digi_release(struct usb_serial *serial);
+static int digi_port_probe(struct usb_serial_port *port);
+static int digi_port_remove(struct usb_serial_port *port);
static void digi_read_bulk_callback(struct urb *urb);
static int digi_read_inb_callback(struct urb *urb);
static int digi_read_oob_callback(struct urb *urb);
@@ -294,6 +296,8 @@ static struct usb_serial_driver digi_acceleport_2_device = {
.attach = digi_startup,
.disconnect = digi_disconnect,
.release = digi_release,
+ .port_probe = digi_port_probe,
+ .port_remove = digi_port_remove,
};
static struct usb_serial_driver digi_acceleport_4_device = {
@@ -320,6 +324,8 @@ static struct usb_serial_driver digi_acceleport_4_device = {
.attach = digi_startup,
.disconnect = digi_disconnect,
.release = digi_release,
+ .port_probe = digi_port_probe,
+ .port_remove = digi_port_remove,
};
static struct usb_serial_driver * const serial_drivers[] = {
@@ -1240,59 +1246,50 @@ static int digi_startup_device(struct usb_serial *serial)
return ret;
}
-
-static int digi_startup(struct usb_serial *serial)
+static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
{
-
- int i;
struct digi_port *priv;
- struct digi_serial *serial_priv;
- /* allocate the private data structures for all ports */
- /* number of regular ports + 1 for the out-of-band port */
- for (i = 0; i < serial->type->num_ports + 1; i++) {
- /* allocate port private structure */
- priv = kmalloc(sizeof(struct digi_port), GFP_KERNEL);
- if (priv == NULL) {
- while (--i >= 0)
- kfree(usb_get_serial_port_data(serial->port[i]));
- return 1; /* error */
- }
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
- /* initialize port private structure */
- spin_lock_init(&priv->dp_port_lock);
- priv->dp_port_num = i;
- priv->dp_out_buf_len = 0;
- priv->dp_write_urb_in_use = 0;
- priv->dp_modem_signals = 0;
- init_waitqueue_head(&priv->dp_modem_change_wait);
- priv->dp_transmit_idle = 0;
- init_waitqueue_head(&priv->dp_transmit_idle_wait);
- priv->dp_throttled = 0;
- priv->dp_throttle_restart = 0;
- init_waitqueue_head(&priv->dp_flush_wait);
- init_waitqueue_head(&priv->dp_close_wait);
- INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
- priv->dp_port = serial->port[i];
- /* initialize write wait queue for this port */
- init_waitqueue_head(&serial->port[i]->write_wait);
-
- usb_set_serial_port_data(serial->port[i], priv);
- }
+ spin_lock_init(&priv->dp_port_lock);
+ priv->dp_port_num = port_num;
+ init_waitqueue_head(&priv->dp_modem_change_wait);
+ init_waitqueue_head(&priv->dp_transmit_idle_wait);
+ init_waitqueue_head(&priv->dp_flush_wait);
+ init_waitqueue_head(&priv->dp_close_wait);
+ INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
+ priv->dp_port = port;
- /* allocate serial private structure */
- serial_priv = kmalloc(sizeof(struct digi_serial), GFP_KERNEL);
- if (serial_priv == NULL) {
- for (i = 0; i < serial->type->num_ports + 1; i++)
- kfree(usb_get_serial_port_data(serial->port[i]));
- return 1; /* error */
- }
+ init_waitqueue_head(&port->write_wait);
+
+ usb_set_serial_port_data(port, priv);
+
+ return 0;
+}
+
+static int digi_startup(struct usb_serial *serial)
+{
+ struct digi_serial *serial_priv;
+ int ret;
+
+ serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
+ if (!serial_priv)
+ return -ENOMEM;
- /* initialize serial private structure */
spin_lock_init(&serial_priv->ds_serial_lock);
serial_priv->ds_oob_port_num = serial->type->num_ports;
serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num];
- serial_priv->ds_device_started = 0;
+
+ ret = digi_port_init(serial_priv->ds_oob_port,
+ serial_priv->ds_oob_port_num);
+ if (ret) {
+ kfree(serial_priv);
+ return ret;
+ }
+
usb_set_serial_data(serial, serial_priv);
return 0;
@@ -1313,15 +1310,35 @@ static void digi_disconnect(struct usb_serial *serial)
static void digi_release(struct usb_serial *serial)
{
- int i;
+ struct digi_serial *serial_priv;
+ struct digi_port *priv;
+
+ serial_priv = usb_get_serial_data(serial);
+
+ priv = usb_get_serial_port_data(serial_priv->ds_oob_port);
+ kfree(priv);
- /* free the private data structures for all ports */
- /* number of regular ports + 1 for the out-of-band port */
- for (i = 0; i < serial->type->num_ports + 1; i++)
- kfree(usb_get_serial_port_data(serial->port[i]));
- kfree(usb_get_serial_data(serial));
+ kfree(serial_priv);
}
+static int digi_port_probe(struct usb_serial_port *port)
+{
+ unsigned port_num;
+
+ port_num = port->number - port->serial->minor;
+
+ return digi_port_init(port, port_num);
+}
+
+static int digi_port_remove(struct usb_serial_port *port)
+{
+ struct digi_port *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
+}
static void digi_read_bulk_callback(struct urb *urb)
{
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 20a132ec39e..4264821a3b3 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -203,8 +203,7 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
return 0;
}
-/* fake probe - only to allocate data structures */
-static int ipw_probe(struct usb_serial *serial, const struct usb_device_id *id)
+static int ipw_attach(struct usb_serial *serial)
{
struct usb_wwan_intf_private *data;
@@ -303,9 +302,9 @@ static struct usb_serial_driver ipw_device = {
.num_ports = 1,
.open = ipw_open,
.close = ipw_close,
- .probe = ipw_probe,
- .attach = usb_wwan_startup,
+ .attach = ipw_attach,
.release = ipw_release,
+ .port_probe = usb_wwan_port_probe,
.port_remove = usb_wwan_port_remove,
.dtr_rts = ipw_dtr_rts,
.write = usb_wwan_write,
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 29c943d737d..7179b0c5f81 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1374,13 +1374,9 @@ static struct callbacks {
data in device_details */
static void keyspan_setup_urbs(struct usb_serial *serial)
{
- int i, j;
struct keyspan_serial_private *s_priv;
const struct keyspan_device_details *d_details;
- struct usb_serial_port *port;
- struct keyspan_port_private *p_priv;
struct callbacks *cback;
- int endp;
s_priv = usb_get_serial_data(serial);
d_details = s_priv->device_details;
@@ -1404,45 +1400,6 @@ static void keyspan_setup_urbs(struct usb_serial *serial)
(serial, d_details->glocont_endpoint, USB_DIR_OUT,
serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
cback->glocont_callback);
-
- /* Setup endpoints for each port specific thing */
- for (i = 0; i < d_details->num_ports; i++) {
- port = serial->port[i];
- p_priv = usb_get_serial_port_data(port);
-
- /* Do indat endpoints first, once for each flip */
- endp = d_details->indat_endpoints[i];
- for (j = 0; j <= d_details->indat_endp_flip; ++j, ++endp) {
- p_priv->in_urbs[j] = keyspan_setup_urb
- (serial, endp, USB_DIR_IN, port,
- p_priv->in_buffer[j], 64,
- cback->indat_callback);
- }
- for (; j < 2; ++j)
- p_priv->in_urbs[j] = NULL;
-
- /* outdat endpoints also have flip */
- endp = d_details->outdat_endpoints[i];
- for (j = 0; j <= d_details->outdat_endp_flip; ++j, ++endp) {
- p_priv->out_urbs[j] = keyspan_setup_urb
- (serial, endp, USB_DIR_OUT, port,
- p_priv->out_buffer[j], 64,
- cback->outdat_callback);
- }
- for (; j < 2; ++j)
- p_priv->out_urbs[j] = NULL;
-
- /* inack endpoint */
- p_priv->inack_urb = keyspan_setup_urb
- (serial, d_details->inack_endpoints[i], USB_DIR_IN,
- port, p_priv->inack_buffer, 1, cback->inack_callback);
-
- /* outcont endpoint */
- p_priv->outcont_urb = keyspan_setup_urb
- (serial, d_details->outcont_endpoints[i], USB_DIR_OUT,
- port, p_priv->outcont_buffer, 64,
- cback->outcont_callback);
- }
}
/* usa19 function doesn't require prescaler */
@@ -2407,9 +2364,7 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
static int keyspan_startup(struct usb_serial *serial)
{
int i, err;
- struct usb_serial_port *port;
struct keyspan_serial_private *s_priv;
- struct keyspan_port_private *p_priv;
const struct keyspan_device_details *d_details;
for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i)
@@ -2432,19 +2387,6 @@ static int keyspan_startup(struct usb_serial *serial)
s_priv->device_details = d_details;
usb_set_serial_data(serial, s_priv);
- /* Now setup per port private data */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- p_priv = kzalloc(sizeof(struct keyspan_port_private),
- GFP_KERNEL);
- if (!p_priv) {
- dev_dbg(&port->dev, "%s - kmalloc for keyspan_port_private (%d) failed!.\n", __func__, i);
- return 1;
- }
- p_priv->device_details = d_details;
- usb_set_serial_port_data(port, p_priv);
- }
-
keyspan_setup_urbs(serial);
if (s_priv->instat_urb != NULL) {
@@ -2463,59 +2405,112 @@ static int keyspan_startup(struct usb_serial *serial)
static void keyspan_disconnect(struct usb_serial *serial)
{
- int i, j;
- struct usb_serial_port *port;
- struct keyspan_serial_private *s_priv;
- struct keyspan_port_private *p_priv;
+ struct keyspan_serial_private *s_priv;
s_priv = usb_get_serial_data(serial);
- /* Stop reading/writing urbs */
stop_urb(s_priv->instat_urb);
stop_urb(s_priv->glocont_urb);
stop_urb(s_priv->indat_urb);
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
- p_priv = usb_get_serial_port_data(port);
- stop_urb(p_priv->inack_urb);
- stop_urb(p_priv->outcont_urb);
- for (j = 0; j < 2; j++) {
- stop_urb(p_priv->in_urbs[j]);
- stop_urb(p_priv->out_urbs[j]);
- }
- }
+}
+
+static void keyspan_release(struct usb_serial *serial)
+{
+ struct keyspan_serial_private *s_priv;
+
+ s_priv = usb_get_serial_data(serial);
- /* Now free them */
usb_free_urb(s_priv->instat_urb);
usb_free_urb(s_priv->indat_urb);
usb_free_urb(s_priv->glocont_urb);
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
- p_priv = usb_get_serial_port_data(port);
- usb_free_urb(p_priv->inack_urb);
- usb_free_urb(p_priv->outcont_urb);
- for (j = 0; j < 2; j++) {
- usb_free_urb(p_priv->in_urbs[j]);
- usb_free_urb(p_priv->out_urbs[j]);
- }
- }
+
+ kfree(s_priv);
}
-static void keyspan_release(struct usb_serial *serial)
+static int keyspan_port_probe(struct usb_serial_port *port)
{
- int i;
- struct usb_serial_port *port;
- struct keyspan_serial_private *s_priv;
+ struct usb_serial *serial = port->serial;
+ struct keyspan_port_private *s_priv;
+ struct keyspan_port_private *p_priv;
+ const struct keyspan_device_details *d_details;
+ struct callbacks *cback;
+ int endp;
+ int port_num;
+ int i;
s_priv = usb_get_serial_data(serial);
+ d_details = s_priv->device_details;
- kfree(s_priv);
+ p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL);
+ if (!p_priv)
+ return -ENOMEM;
- /* Now free per port private data */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- kfree(usb_get_serial_port_data(port));
+ s_priv = usb_get_serial_data(port->serial);
+ p_priv->device_details = d_details;
+
+ /* Setup values for the various callback routines */
+ cback = &keyspan_callbacks[d_details->msg_format];
+
+ port_num = port->number - port->serial->minor;
+
+ /* Do indat endpoints first, once for each flip */
+ endp = d_details->indat_endpoints[port_num];
+ for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) {
+ p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp,
+ USB_DIR_IN, port,
+ p_priv->in_buffer[i], 64,
+ cback->indat_callback);
+ }
+ /* outdat endpoints also have flip */
+ endp = d_details->outdat_endpoints[port_num];
+ for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) {
+ p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp,
+ USB_DIR_OUT, port,
+ p_priv->out_buffer[i], 64,
+ cback->outdat_callback);
+ }
+ /* inack endpoint */
+ p_priv->inack_urb = keyspan_setup_urb(serial,
+ d_details->inack_endpoints[port_num],
+ USB_DIR_IN, port,
+ p_priv->inack_buffer, 1,
+ cback->inack_callback);
+ /* outcont endpoint */
+ p_priv->outcont_urb = keyspan_setup_urb(serial,
+ d_details->outcont_endpoints[port_num],
+ USB_DIR_OUT, port,
+ p_priv->outcont_buffer, 64,
+ cback->outcont_callback);
+
+ usb_set_serial_port_data(port, p_priv);
+
+ return 0;
+}
+
+static int keyspan_port_remove(struct usb_serial_port *port)
+{
+ struct keyspan_port_private *p_priv;
+ int i;
+
+ p_priv = usb_get_serial_port_data(port);
+
+ stop_urb(p_priv->inack_urb);
+ stop_urb(p_priv->outcont_urb);
+ for (i = 0; i < 2; i++) {
+ stop_urb(p_priv->in_urbs[i]);
+ stop_urb(p_priv->out_urbs[i]);
+ }
+
+ usb_free_urb(p_priv->inack_urb);
+ usb_free_urb(p_priv->outcont_urb);
+ for (i = 0; i < 2; i++) {
+ usb_free_urb(p_priv->in_urbs[i]);
+ usb_free_urb(p_priv->out_urbs[i]);
}
+
+ kfree(p_priv);
+
+ return 0;
}
MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 0a8a40b5711..0273dda303a 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -42,6 +42,8 @@ static void keyspan_dtr_rts (struct usb_serial_port *port, int on);
static int keyspan_startup (struct usb_serial *serial);
static void keyspan_disconnect (struct usb_serial *serial);
static void keyspan_release (struct usb_serial *serial);
+static int keyspan_port_probe(struct usb_serial_port *port);
+static int keyspan_port_remove(struct usb_serial_port *port);
static int keyspan_write_room (struct tty_struct *tty);
static int keyspan_write (struct tty_struct *tty,
@@ -567,6 +569,8 @@ static struct usb_serial_driver keyspan_1port_device = {
.attach = keyspan_startup,
.disconnect = keyspan_disconnect,
.release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
};
static struct usb_serial_driver keyspan_2port_device = {
@@ -589,6 +593,8 @@ static struct usb_serial_driver keyspan_2port_device = {
.attach = keyspan_startup,
.disconnect = keyspan_disconnect,
.release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
};
static struct usb_serial_driver keyspan_4port_device = {
@@ -611,6 +617,8 @@ static struct usb_serial_driver keyspan_4port_device = {
.attach = keyspan_startup,
.disconnect = keyspan_disconnect,
.release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
};
static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index f3947712e13..8a208100410 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -49,7 +49,8 @@
* Function prototypes
*/
static int mct_u232_startup(struct usb_serial *serial);
-static void mct_u232_release(struct usb_serial *serial);
+static int mct_u232_port_probe(struct usb_serial_port *port);
+static int mct_u232_port_remove(struct usb_serial_port *remove);
static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port);
static void mct_u232_close(struct usb_serial_port *port);
static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
@@ -99,7 +100,8 @@ static struct usb_serial_driver mct_u232_device = {
.tiocmget = mct_u232_tiocmget,
.tiocmset = mct_u232_tiocmset,
.attach = mct_u232_startup,
- .release = mct_u232_release,
+ .port_probe = mct_u232_port_probe,
+ .port_remove = mct_u232_port_remove,
.ioctl = mct_u232_ioctl,
.get_icount = mct_u232_get_icount,
};
@@ -388,18 +390,8 @@ static void mct_u232_msr_to_state(struct usb_serial_port *port,
static int mct_u232_startup(struct usb_serial *serial)
{
- struct mct_u232_private *priv;
struct usb_serial_port *port, *rport;
- priv = kzalloc(sizeof(struct mct_u232_private), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
- spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->msr_wait);
- usb_set_serial_port_data(serial->port[0], priv);
-
- init_waitqueue_head(&serial->port[0]->write_wait);
-
/* Puh, that's dirty */
port = serial->port[0];
rport = serial->port[1];
@@ -412,18 +404,31 @@ static int mct_u232_startup(struct usb_serial *serial)
return 0;
} /* mct_u232_startup */
+static int mct_u232_port_probe(struct usb_serial_port *port)
+{
+ struct mct_u232_private *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->lock);
+ init_waitqueue_head(&priv->msr_wait);
+
+ usb_set_serial_port_data(port, priv);
-static void mct_u232_release(struct usb_serial *serial)
+ return 0;
+}
+
+static int mct_u232_port_remove(struct usb_serial_port *port)
{
struct mct_u232_private *priv;
- int i;
- for (i = 0; i < serial->num_ports; ++i) {
- /* My special items, the standard routines free my urbs */
- priv = usb_get_serial_port_data(serial->port[i]);
- kfree(priv);
- }
-} /* mct_u232_release */
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
+}
static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
{
@@ -515,12 +520,14 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
static void mct_u232_close(struct usb_serial_port *port)
{
- if (port->serial->dev) {
- /* shutdown our urbs */
- usb_kill_urb(port->write_urb);
- usb_kill_urb(port->read_urb);
- usb_kill_urb(port->interrupt_in_urb);
- }
+ /*
+ * Must kill the read urb as it is actually an interrupt urb, which
+ * generic close thus fails to kill.
+ */
+ usb_kill_urb(port->read_urb);
+ usb_kill_urb(port->interrupt_in_urb);
+
+ usb_serial_generic_close(port);
} /* mct_u232_close */
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 0b257ddffbd..6f29c74eb76 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -179,16 +179,13 @@ static void metrousb_cleanup(struct usb_serial_port *port)
{
dev_dbg(&port->dev, "%s\n", __func__);
- if (port->serial->dev) {
- /* Shutdown any interrupt in urbs. */
- if (port->interrupt_in_urb) {
- usb_unlink_urb(port->interrupt_in_urb);
- usb_kill_urb(port->interrupt_in_urb);
- }
-
- /* Send deactivate cmd to device */
+ usb_unlink_urb(port->interrupt_in_urb);
+ usb_kill_urb(port->interrupt_in_urb);
+
+ mutex_lock(&port->serial->disc_mutex);
+ if (!port->serial->disconnected)
metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port);
- }
+ mutex_unlock(&port->serial->disc_mutex);
}
static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -271,51 +268,27 @@ static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int contr
return retval;
}
-static void metrousb_shutdown(struct usb_serial *serial)
+static int metrousb_port_probe(struct usb_serial_port *port)
{
- int i = 0;
+ struct metrousb_private *metro_priv;
- dev_dbg(&serial->dev->dev, "%s\n", __func__);
+ metro_priv = kzalloc(sizeof(*metro_priv), GFP_KERNEL);
+ if (!metro_priv)
+ return -ENOMEM;
- /* Stop reading and writing on all ports. */
- for (i = 0; i < serial->num_ports; ++i) {
- /* Close any open urbs. */
- metrousb_cleanup(serial->port[i]);
+ spin_lock_init(&metro_priv->lock);
- /* Free memory. */
- kfree(usb_get_serial_port_data(serial->port[i]));
- usb_set_serial_port_data(serial->port[i], NULL);
+ usb_set_serial_port_data(port, metro_priv);
- dev_dbg(&serial->dev->dev, "%s - freed port number=%d\n",
- __func__, serial->port[i]->number);
- }
+ return 0;
}
-static int metrousb_startup(struct usb_serial *serial)
+static int metrousb_port_remove(struct usb_serial_port *port)
{
struct metrousb_private *metro_priv;
- struct usb_serial_port *port;
- int i = 0;
- dev_dbg(&serial->dev->dev, "%s\n", __func__);
-
- /* Loop through the serial ports setting up the private structures.
- * Currently we only use one port. */
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
-
- /* Declare memory. */
- metro_priv = kzalloc(sizeof(struct metrousb_private), GFP_KERNEL);
- if (!metro_priv)
- return -ENOMEM;
-
- /* Initialize memory. */
- spin_lock_init(&metro_priv->lock);
- usb_set_serial_port_data(port, metro_priv);
-
- dev_dbg(&serial->dev->dev, "%s - port number=%d\n ",
- __func__, port->number);
- }
+ metro_priv = usb_get_serial_port_data(port);
+ kfree(metro_priv);
return 0;
}
@@ -414,8 +387,8 @@ static struct usb_serial_driver metrousb_device = {
.close = metrousb_cleanup,
.read_int_callback = metrousb_read_int_callback,
.write_int_callback = metrousb_write_int_callback,
- .attach = metrousb_startup,
- .release = metrousb_shutdown,
+ .port_probe = metrousb_port_probe,
+ .port_remove = metrousb_port_remove,
.throttle = metrousb_throttle,
.unthrottle = metrousb_unthrottle,
.tiocmget = metrousb_tiocmget,
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 1bf1ad06666..75267421aad 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1966,9 +1966,7 @@ static int mos7720_ioctl(struct tty_struct *tty,
static int mos7720_startup(struct usb_serial *serial)
{
- struct moschip_port *mos7720_port;
struct usb_device *dev;
- int i;
char data;
u16 product;
int ret_val;
@@ -1999,29 +1997,6 @@ static int mos7720_startup(struct usb_serial *serial)
serial->port[1]->interrupt_in_buffer = NULL;
}
-
- /* set up serial port private structures */
- for (i = 0; i < serial->num_ports; ++i) {
- mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
- if (mos7720_port == NULL) {
- dev_err(&dev->dev, "%s - Out of memory\n", __func__);
- return -ENOMEM;
- }
-
- /* Initialize all port interrupt end point to port 0 int
- * endpoint. Our device has only one interrupt endpoint
- * common to all ports */
- serial->port[i]->interrupt_in_endpointAddress =
- serial->port[0]->interrupt_in_endpointAddress;
-
- mos7720_port->port = serial->port[i];
- usb_set_serial_port_data(serial->port[i], mos7720_port);
-
- dev_dbg(&dev->dev, "port number is %d\n", serial->port[i]->number);
- dev_dbg(&dev->dev, "serial number is %d\n", serial->minor);
- }
-
-
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
@@ -2049,8 +2024,6 @@ static int mos7720_startup(struct usb_serial *serial)
static void mos7720_release(struct usb_serial *serial)
{
- int i;
-
#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
/* close the parallel port */
@@ -2089,9 +2062,36 @@ static void mos7720_release(struct usb_serial *serial)
kref_put(&mos_parport->ref_count, destroy_mos_parport);
}
#endif
- /* free private structure allocated for serial port */
- for (i = 0; i < serial->num_ports; ++i)
- kfree(usb_get_serial_port_data(serial->port[i]));
+}
+
+static int mos7720_port_probe(struct usb_serial_port *port)
+{
+ struct moschip_port *mos7720_port;
+
+ mos7720_port = kzalloc(sizeof(*mos7720_port), GFP_KERNEL);
+ if (!mos7720_port)
+ return -ENOMEM;
+
+ /* Initialize all port interrupt end point to port 0 int endpoint.
+ * Our device has only one interrupt endpoint common to all ports.
+ */
+ port->interrupt_in_endpointAddress =
+ port->serial->port[0]->interrupt_in_endpointAddress;
+ mos7720_port->port = port;
+
+ usb_set_serial_port_data(port, mos7720_port);
+
+ return 0;
+}
+
+static int mos7720_port_remove(struct usb_serial_port *port)
+{
+ struct moschip_port *mos7720_port;
+
+ mos7720_port = usb_get_serial_port_data(port);
+ kfree(mos7720_port);
+
+ return 0;
}
static struct usb_serial_driver moschip7720_2port_driver = {
@@ -2109,6 +2109,8 @@ static struct usb_serial_driver moschip7720_2port_driver = {
.probe = mos77xx_probe,
.attach = mos7720_startup,
.release = mos7720_release,
+ .port_probe = mos7720_port_probe,
+ .port_remove = mos7720_port_remove,
.ioctl = mos7720_ioctl,
.tiocmget = mos7720_tiocmget,
.tiocmset = mos7720_tiocmset,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index d6d4eeca8c6..1cf3375ec1a 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -218,12 +218,10 @@ struct moschip_port {
int port_num; /*Actual port number in the device(1,2,etc) */
struct urb *write_urb; /* write URB for this port */
struct urb *read_urb; /* read URB for this port */
- struct urb *int_urb;
__u8 shadowLCR; /* last LCR value received */
__u8 shadowMCR; /* last MCR value received */
char open;
char open_ports;
- char zombie;
wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */
int delta_msr_cond;
@@ -478,7 +476,6 @@ static void mos7840_control_callback(struct urb *urb)
struct moschip_port *mos7840_port;
struct device *dev = &urb->dev->dev;
__u8 regval = 0x0;
- int result = 0;
int status = urb->status;
mos7840_port = urb->context;
@@ -495,7 +492,7 @@ static void mos7840_control_callback(struct urb *urb)
return;
default:
dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status);
- goto exit;
+ return;
}
dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length);
@@ -508,16 +505,6 @@ static void mos7840_control_callback(struct urb *urb)
mos7840_handle_new_msr(mos7840_port, regval);
else if (mos7840_port->MsrLsr == 1)
mos7840_handle_new_lsr(mos7840_port, regval);
-
-exit:
- spin_lock(&mos7840_port->pool_lock);
- if (!mos7840_port->zombie)
- result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC);
- spin_unlock(&mos7840_port->pool_lock);
- if (result) {
- dev_err(dev, "%s - Error %d submitting interrupt urb\n",
- __func__, result);
- }
}
static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
@@ -686,14 +673,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
wreg = MODEM_STATUS_REGISTER;
break;
}
- spin_lock(&mos7840_port->pool_lock);
- if (!mos7840_port->zombie) {
- rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data);
- } else {
- spin_unlock(&mos7840_port->pool_lock);
- return;
- }
- spin_unlock(&mos7840_port->pool_lock);
+ rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data);
}
}
}
@@ -2347,309 +2327,249 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
return mos7840_num_ports;
}
-/****************************************************************************
- * mos7840_startup
- ****************************************************************************/
-
-static int mos7840_startup(struct usb_serial *serial)
+static int mos7840_port_probe(struct usb_serial_port *port)
{
+ struct usb_serial *serial = port->serial;
struct moschip_port *mos7840_port;
- struct usb_device *dev;
- int i, status;
+ int status;
+ int pnum;
__u16 Data;
- dev = serial->dev;
-
/* we set up the pointers to the endpoints in the mos7840_open *
* function, as the structures aren't created yet. */
- /* set up port private structures */
- for (i = 0; i < serial->num_ports; ++i) {
- dev_dbg(&dev->dev, "mos7840_startup: configuring port %d............\n", i);
- mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
- if (mos7840_port == NULL) {
- dev_err(&dev->dev, "%s - Out of memory\n", __func__);
- status = -ENOMEM;
- i--; /* don't follow NULL pointer cleaning up */
- goto error;
- }
-
- /* Initialize all port interrupt end point to port 0 int
- * endpoint. Our device has only one interrupt end point
- * common to all port */
-
- mos7840_port->port = serial->port[i];
- mos7840_set_port_private(serial->port[i], mos7840_port);
- spin_lock_init(&mos7840_port->pool_lock);
-
- /* minor is not initialised until later by
- * usb-serial.c:get_free_serial() and cannot therefore be used
- * to index device instances */
- mos7840_port->port_num = i + 1;
- dev_dbg(&dev->dev, "serial->port[i]->number = %d\n", serial->port[i]->number);
- dev_dbg(&dev->dev, "serial->port[i]->serial->minor = %d\n", serial->port[i]->serial->minor);
- dev_dbg(&dev->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
- dev_dbg(&dev->dev, "serial->minor = %d\n", serial->minor);
-
- if (mos7840_port->port_num == 1) {
- mos7840_port->SpRegOffset = 0x0;
- mos7840_port->ControlRegOffset = 0x1;
- mos7840_port->DcrRegOffset = 0x4;
- } else if ((mos7840_port->port_num == 2)
- && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0x8;
- mos7840_port->ControlRegOffset = 0x9;
- mos7840_port->DcrRegOffset = 0x16;
- } else if ((mos7840_port->port_num == 2)
- && (serial->num_ports == 2)) {
- mos7840_port->SpRegOffset = 0xa;
- mos7840_port->ControlRegOffset = 0xb;
- mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 3)
- && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0xa;
- mos7840_port->ControlRegOffset = 0xb;
- mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 4)
- && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0xc;
- mos7840_port->ControlRegOffset = 0xd;
- mos7840_port->DcrRegOffset = 0x1c;
- }
- mos7840_dump_serial_port(serial->port[i], mos7840_port);
- mos7840_set_port_private(serial->port[i], mos7840_port);
+ pnum = port->number - serial->minor;
- /* enable rx_disable bit in control register */
- status = mos7840_get_reg_sync(serial->port[i],
- mos7840_port->ControlRegOffset, &Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Reading ControlReg failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
- Data |= 0x08; /* setting driver done bit */
- Data |= 0x04; /* sp1_bit to have cts change reflect in
- modem status reg */
-
- /* Data |= 0x20; //rx_disable bit */
- status = mos7840_set_reg_sync(serial->port[i],
- mos7840_port->ControlRegOffset, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
+ dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum);
+ mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
+ if (mos7840_port == NULL) {
+ dev_err(&port->dev, "%s - Out of memory\n", __func__);
+ return -ENOMEM;
+ }
- /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
- and 0x24 in DCR3 */
- Data = 0x01;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (mos7840_port->DcrRegOffset + 0), Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing DCR0 failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "DCR0 Writing success status%d\n", status);
+ /* Initialize all port interrupt end point to port 0 int
+ * endpoint. Our device has only one interrupt end point
+ * common to all port */
+
+ mos7840_port->port = port;
+ mos7840_set_port_private(port, mos7840_port);
+ spin_lock_init(&mos7840_port->pool_lock);
+
+ /* minor is not initialised until later by
+ * usb-serial.c:get_free_serial() and cannot therefore be used
+ * to index device instances */
+ mos7840_port->port_num = pnum + 1;
+ dev_dbg(&port->dev, "port->number = %d\n", port->number);
+ dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor);
+ dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
+ dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor);
+
+ if (mos7840_port->port_num == 1) {
+ mos7840_port->SpRegOffset = 0x0;
+ mos7840_port->ControlRegOffset = 0x1;
+ mos7840_port->DcrRegOffset = 0x4;
+ } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) {
+ mos7840_port->SpRegOffset = 0x8;
+ mos7840_port->ControlRegOffset = 0x9;
+ mos7840_port->DcrRegOffset = 0x16;
+ } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) {
+ mos7840_port->SpRegOffset = 0xa;
+ mos7840_port->ControlRegOffset = 0xb;
+ mos7840_port->DcrRegOffset = 0x19;
+ } else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) {
+ mos7840_port->SpRegOffset = 0xa;
+ mos7840_port->ControlRegOffset = 0xb;
+ mos7840_port->DcrRegOffset = 0x19;
+ } else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) {
+ mos7840_port->SpRegOffset = 0xc;
+ mos7840_port->ControlRegOffset = 0xd;
+ mos7840_port->DcrRegOffset = 0x1c;
+ }
+ mos7840_dump_serial_port(port, mos7840_port);
+ mos7840_set_port_private(port, mos7840_port);
+
+ /* enable rx_disable bit in control register */
+ status = mos7840_get_reg_sync(port,
+ mos7840_port->ControlRegOffset, &Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
+ Data |= 0x08; /* setting driver done bit */
+ Data |= 0x04; /* sp1_bit to have cts change reflect in
+ modem status reg */
- Data = 0x05;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (mos7840_port->DcrRegOffset + 1), Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing DCR1 failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "DCR1 Writing success status%d\n", status);
+ /* Data |= 0x20; //rx_disable bit */
+ status = mos7840_set_reg_sync(port,
+ mos7840_port->ControlRegOffset, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
- Data = 0x24;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (mos7840_port->DcrRegOffset + 2), Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing DCR2 failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "DCR2 Writing success status%d\n", status);
+ /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
+ and 0x24 in DCR3 */
+ Data = 0x01;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (mos7840_port->DcrRegOffset + 0), Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status);
- /* write values in clkstart0x0 and clkmulti 0x20 */
- Data = 0x0;
- status = mos7840_set_reg_sync(serial->port[i],
- CLK_START_VALUE_REGISTER, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
+ Data = 0x05;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (mos7840_port->DcrRegOffset + 1), Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status);
- Data = 0x20;
- status = mos7840_set_reg_sync(serial->port[i],
- CLK_MULTI_REGISTER, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
- goto error;
- } else
- dev_dbg(&dev->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);
+ Data = 0x24;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (mos7840_port->DcrRegOffset + 2), Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status);
- /* write value 0x0 to scratchpad register */
- Data = 0x00;
- status = mos7840_set_uart_reg(serial->port[i],
- SCRATCH_PAD_REGISTER, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
+ /* write values in clkstart0x0 and clkmulti 0x20 */
+ Data = 0x0;
+ status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
- /* Zero Length flag register */
- if ((mos7840_port->port_num != 1)
- && (serial->num_ports == 2)) {
+ Data = 0x20;
+ status = mos7840_set_reg_sync(port, CLK_MULTI_REGISTER, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
+ goto error;
+ } else
+ dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);
- Data = 0xff;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (ZLP_REG1 +
- ((__u16)mos7840_port->port_num)), Data);
- dev_dbg(&dev->dev, "ZLIP offset %x\n",
+ /* write value 0x0 to scratchpad register */
+ Data = 0x00;
+ status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
+
+ /* Zero Length flag register */
+ if ((mos7840_port->port_num != 1) && (serial->num_ports == 2)) {
+ Data = 0xff;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (ZLP_REG1 +
+ ((__u16)mos7840_port->port_num)), Data);
+ dev_dbg(&port->dev, "ZLIP offset %x\n",
(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num)));
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 2, status);
- break;
- } else
- dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 2, status);
- } else {
- Data = 0xff;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (ZLP_REG1 +
- ((__u16)mos7840_port->port_num) - 0x1), Data);
- dev_dbg(&dev->dev, "ZLIP offset %x\n",
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status);
+ } else {
+ Data = 0xff;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (ZLP_REG1 +
+ ((__u16)mos7840_port->port_num) - 0x1), Data);
+ dev_dbg(&port->dev, "ZLIP offset %x\n",
(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1));
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 1, status);
- break;
- } else
- dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 1, status);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status);
- }
- mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
- mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
- mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest),
- GFP_KERNEL);
- if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf ||
- !mos7840_port->dr) {
- status = -ENOMEM;
- goto error;
- }
+ }
+ mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
+ mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
+ mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest),
+ GFP_KERNEL);
+ if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf ||
+ !mos7840_port->dr) {
+ status = -ENOMEM;
+ goto error;
+ }
- mos7840_port->has_led = false;
+ mos7840_port->has_led = false;
- /* Initialize LED timers */
- if (device_type == MOSCHIP_DEVICE_ID_7810) {
- mos7840_port->has_led = true;
+ /* Initialize LED timers */
+ if (device_type == MOSCHIP_DEVICE_ID_7810) {
+ mos7840_port->has_led = true;
- init_timer(&mos7840_port->led_timer1);
- mos7840_port->led_timer1.function = mos7840_led_off;
- mos7840_port->led_timer1.expires =
- jiffies + msecs_to_jiffies(LED_ON_MS);
- mos7840_port->led_timer1.data =
- (unsigned long)mos7840_port;
+ init_timer(&mos7840_port->led_timer1);
+ mos7840_port->led_timer1.function = mos7840_led_off;
+ mos7840_port->led_timer1.expires =
+ jiffies + msecs_to_jiffies(LED_ON_MS);
+ mos7840_port->led_timer1.data = (unsigned long)mos7840_port;
- init_timer(&mos7840_port->led_timer2);
- mos7840_port->led_timer2.function =
- mos7840_led_flag_off;
- mos7840_port->led_timer2.expires =
- jiffies + msecs_to_jiffies(LED_OFF_MS);
- mos7840_port->led_timer2.data =
- (unsigned long)mos7840_port;
+ init_timer(&mos7840_port->led_timer2);
+ mos7840_port->led_timer2.function = mos7840_led_flag_off;
+ mos7840_port->led_timer2.expires =
+ jiffies + msecs_to_jiffies(LED_OFF_MS);
+ mos7840_port->led_timer2.data = (unsigned long)mos7840_port;
- mos7840_port->led_flag = false;
+ mos7840_port->led_flag = false;
- /* Turn off LED */
- mos7840_set_led_sync(serial->port[i],
- MODEM_CONTROL_REGISTER, 0x0300);
- }
+ /* Turn off LED */
+ mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
}
+out:
+ if (pnum == serial->num_ports - 1) {
+ /* Zero Length flag enable */
+ Data = 0x0f;
+ status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
+ goto error;
+ } else
+ dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status);
- /* Zero Length flag enable */
- Data = 0x0f;
- status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
- goto error;
- } else
- dev_dbg(&dev->dev, "ZLP_REG5 Writing success status%d\n", status);
-
- /* setting configuration feature to one */
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, MOS_WDR_TIMEOUT);
+ /* setting configuration feature to one */
+ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ 0x03, 0x00, 0x01, 0x00, NULL, 0x00,
+ MOS_WDR_TIMEOUT);
+ }
return 0;
error:
- for (/* nothing */; i >= 0; i--) {
- mos7840_port = mos7840_get_port_private(serial->port[i]);
+ kfree(mos7840_port->dr);
+ kfree(mos7840_port->ctrl_buf);
+ usb_free_urb(mos7840_port->control_urb);
+ kfree(mos7840_port);
- kfree(mos7840_port->dr);
- kfree(mos7840_port->ctrl_buf);
- usb_free_urb(mos7840_port->control_urb);
- kfree(mos7840_port);
- serial->port[i] = NULL;
- }
return status;
}
-/****************************************************************************
- * mos7840_disconnect
- * This function is called whenever the device is removed from the usb bus.
- ****************************************************************************/
-
-static void mos7840_disconnect(struct usb_serial *serial)
+static int mos7840_port_remove(struct usb_serial_port *port)
{
- int i;
- unsigned long flags;
struct moschip_port *mos7840_port;
- /* check for the ports to be closed,close the ports and disconnect */
+ mos7840_port = mos7840_get_port_private(port);
- /* free private structure allocated for serial port *
- * stop reads and writes on all ports */
+ if (mos7840_port->has_led) {
+ /* Turn off LED */
+ mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
- for (i = 0; i < serial->num_ports; ++i) {
- mos7840_port = mos7840_get_port_private(serial->port[i]);
- if (mos7840_port) {
- spin_lock_irqsave(&mos7840_port->pool_lock, flags);
- mos7840_port->zombie = 1;
- spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
- usb_kill_urb(mos7840_port->control_urb);
- }
+ del_timer_sync(&mos7840_port->led_timer1);
+ del_timer_sync(&mos7840_port->led_timer2);
}
-}
-
-/****************************************************************************
- * mos7840_release
- * This function is called when the usb_serial structure is freed.
- ****************************************************************************/
-
-static void mos7840_release(struct usb_serial *serial)
-{
- int i;
- struct moschip_port *mos7840_port;
-
- /* check for the ports to be closed,close the ports and disconnect */
+ usb_kill_urb(mos7840_port->control_urb);
+ usb_free_urb(mos7840_port->control_urb);
+ kfree(mos7840_port->ctrl_buf);
+ kfree(mos7840_port->dr);
+ kfree(mos7840_port);
- /* free private structure allocated for serial port *
- * stop reads and writes on all ports */
-
- for (i = 0; i < serial->num_ports; ++i) {
- mos7840_port = mos7840_get_port_private(serial->port[i]);
- if (mos7840_port) {
- if (mos7840_port->has_led) {
- /* Turn off LED */
- mos7840_set_led_sync(mos7840_port->port,
- MODEM_CONTROL_REGISTER, 0x0300);
-
- del_timer_sync(&mos7840_port->led_timer1);
- del_timer_sync(&mos7840_port->led_timer2);
- }
- kfree(mos7840_port->ctrl_buf);
- kfree(mos7840_port->dr);
- kfree(mos7840_port);
- }
- }
+ return 0;
}
static struct usb_serial_driver moschip7840_4port_device = {
@@ -2677,9 +2597,8 @@ static struct usb_serial_driver moschip7840_4port_device = {
.tiocmget = mos7840_tiocmget,
.tiocmset = mos7840_tiocmset,
.get_icount = mos7840_get_icount,
- .attach = mos7840_startup,
- .disconnect = mos7840_disconnect,
- .release = mos7840_release,
+ .port_probe = mos7840_port_probe,
+ .port_remove = mos7840_port_remove,
.read_bulk_callback = mos7840_bulk_in_callback,
.read_int_callback = mos7840_interrupt_callback,
};
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 6def58b7938..9ab73d29577 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -44,8 +44,8 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int omninet_write_room(struct tty_struct *tty);
static void omninet_disconnect(struct usb_serial *serial);
-static void omninet_release(struct usb_serial *serial);
-static int omninet_attach(struct usb_serial *serial);
+static int omninet_port_probe(struct usb_serial_port *port);
+static int omninet_port_remove(struct usb_serial_port *port);
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
@@ -62,7 +62,8 @@ static struct usb_serial_driver zyxel_omninet_device = {
.description = "ZyXEL - omni.net lcd plus usb",
.id_table = id_table,
.num_ports = 1,
- .attach = omninet_attach,
+ .port_probe = omninet_port_probe,
+ .port_remove = omninet_port_remove,
.open = omninet_open,
.close = omninet_close,
.write = omninet_write,
@@ -70,7 +71,6 @@ static struct usb_serial_driver zyxel_omninet_device = {
.read_bulk_callback = omninet_read_bulk_callback,
.write_bulk_callback = omninet_write_bulk_callback,
.disconnect = omninet_disconnect,
- .release = omninet_release,
};
static struct usb_serial_driver * const serial_drivers[] = {
@@ -112,18 +112,26 @@ struct omninet_data {
__u8 od_outseq; /* Sequence number for bulk_out URBs */
};
-static int omninet_attach(struct usb_serial *serial)
+static int omninet_port_probe(struct usb_serial_port *port)
{
struct omninet_data *od;
- struct usb_serial_port *port = serial->port[0];
od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL);
- if (!od) {
- dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n",
- __func__, sizeof(struct omninet_data));
+ if (!od)
return -ENOMEM;
- }
+
usb_set_serial_port_data(port, od);
+
+ return 0;
+}
+
+static int omninet_port_remove(struct usb_serial_port *port)
+{
+ struct omninet_data *od;
+
+ od = usb_get_serial_port_data(port);
+ kfree(od);
+
return 0;
}
@@ -279,14 +287,6 @@ static void omninet_disconnect(struct usb_serial *serial)
usb_kill_urb(wport->write_urb);
}
-
-static void omninet_release(struct usb_serial *serial)
-{
- struct usb_serial_port *port = serial->port[0];
-
- kfree(usb_get_serial_port_data(port));
-}
-
module_usb_serial_driver(serial_drivers, id_table);
MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 41b1647306e..6aba731d486 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -155,7 +155,11 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype,
{
struct usb_serial *serial = port->serial;
int retval;
- u8 buffer[2];
+ u8 *buffer;
+
+ buffer = kzalloc(1, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
buffer[0] = val;
/* Send the message to the vendor control endpoint
@@ -164,6 +168,7 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype,
requesttype,
USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
0, 0, buffer, 1, 0);
+ kfree(buffer);
return retval;
}
@@ -281,7 +286,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
if (!dr) {
dev_err(&port->dev, "out of memory\n");
count = -ENOMEM;
- goto error;
+ goto error_no_dr;
}
dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT;
@@ -311,6 +316,8 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
return count;
error:
+ kfree(dr);
+error_no_dr:
usb_free_urb(urb);
error_no_urb:
kfree(buffer);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 54d4148d01d..5dee7d61241 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -47,6 +47,7 @@
/* Function prototypes */
static int option_probe(struct usb_serial *serial,
const struct usb_device_id *id);
+static int option_attach(struct usb_serial *serial);
static void option_release(struct usb_serial *serial);
static int option_send_setup(struct usb_serial_port *port);
static void option_instat_callback(struct urb *urb);
@@ -1288,8 +1289,9 @@ static struct usb_serial_driver option_1port_device = {
.tiocmget = usb_wwan_tiocmget,
.tiocmset = usb_wwan_tiocmset,
.ioctl = usb_wwan_ioctl,
- .attach = usb_wwan_startup,
+ .attach = option_attach,
.release = option_release,
+ .port_probe = usb_wwan_port_probe,
.port_remove = usb_wwan_port_remove,
.read_int_callback = option_instat_callback,
#ifdef CONFIG_PM
@@ -1335,8 +1337,6 @@ static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
static int option_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
- struct usb_wwan_intf_private *data;
- struct option_private *priv;
struct usb_interface_descriptor *iface_desc =
&serial->interface->cur_altsetting->desc;
struct usb_device_descriptor *dev_desc = &serial->dev->descriptor;
@@ -1374,6 +1374,19 @@ static int option_probe(struct usb_serial *serial,
iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
return -ENODEV;
+ /* Store device id so we can use it during attach. */
+ usb_set_serial_data(serial, (void *)id);
+
+ return 0;
+}
+
+static int option_attach(struct usb_serial *serial)
+{
+ struct usb_interface_descriptor *iface_desc;
+ const struct usb_device_id *id;
+ struct usb_wwan_intf_private *data;
+ struct option_private *priv;
+
data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -1384,6 +1397,10 @@ static int option_probe(struct usb_serial *serial,
return -ENOMEM;
}
+ /* Retrieve device id stored at probe. */
+ id = usb_get_serial_data(serial);
+ iface_desc = &serial->interface->cur_altsetting->desc;
+
priv->bInterfaceNumber = iface_desc->bInterfaceNumber;
data->private = priv;
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index c3ddb65c05f..aa148c21ea4 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -138,7 +138,6 @@ MODULE_DEVICE_TABLE(usb, id_table);
static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
{
- struct usb_wwan_intf_private *data;
struct usb_host_interface *intf = serial->interface->cur_altsetting;
struct device *dev = &serial->dev->dev;
int retval = -ENODEV;
@@ -154,13 +153,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
ifnum = intf->desc.bInterfaceNumber;
dev_dbg(dev, "This Interface = %d\n", ifnum);
- data = kzalloc(sizeof(struct usb_wwan_intf_private),
- GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- spin_lock_init(&data->susp_lock);
-
if (nintf == 1) {
/* QDL mode */
/* Gobi 2000 has a single altsetting, older ones have two */
@@ -253,20 +245,28 @@ done:
}
}
- /* Set serial->private if not returning error */
- if (retval == 0)
- usb_set_serial_data(serial, data);
- else
- kfree(data);
-
return retval;
}
+static int qc_attach(struct usb_serial *serial)
+{
+ struct usb_wwan_intf_private *data;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ spin_lock_init(&data->susp_lock);
+
+ usb_set_serial_data(serial, data);
+
+ return 0;
+}
+
static void qc_release(struct usb_serial *serial)
{
struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
- /* Free the private data allocated in qcprobe */
usb_set_serial_data(serial, NULL);
kfree(priv);
}
@@ -285,8 +285,9 @@ static struct usb_serial_driver qcdevice = {
.write = usb_wwan_write,
.write_room = usb_wwan_write_room,
.chars_in_buffer = usb_wwan_chars_in_buffer,
- .attach = usb_wwan_startup,
+ .attach = qc_attach,
.release = qc_release,
+ .port_probe = usb_wwan_port_probe,
.port_remove = usb_wwan_port_remove,
#ifdef CONFIG_PM
.suspend = usb_wwan_suspend,
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 2cdfdcc90b3..ffcfc962ab1 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -143,12 +143,12 @@ static void qt2_read_bulk_callback(struct urb *urb);
static void qt2_release(struct usb_serial *serial)
{
- int i;
+ struct qt2_serial_private *serial_priv;
- kfree(usb_get_serial_data(serial));
+ serial_priv = usb_get_serial_data(serial);
- for (i = 0; i < serial->num_ports; i++)
- kfree(usb_get_serial_port_data(serial->port[i]));
+ usb_free_urb(serial_priv->read_urb);
+ kfree(serial_priv);
}
static inline int calc_baud_divisor(int baudrate)
@@ -423,11 +423,16 @@ static void qt2_close(struct usb_serial_port *port)
port_priv->is_open = false;
spin_lock_irqsave(&port_priv->urb_lock, flags);
- if (port_priv->write_urb->status == -EINPROGRESS)
- usb_kill_urb(port_priv->write_urb);
+ usb_kill_urb(port_priv->write_urb);
port_priv->urb_in_use = false;
spin_unlock_irqrestore(&port_priv->urb_lock, flags);
+ mutex_lock(&port->serial->disc_mutex);
+ if (port->serial->disconnected) {
+ mutex_unlock(&port->serial->disc_mutex);
+ return;
+ }
+
/* flush the port transmit buffer */
i = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
@@ -459,26 +464,14 @@ static void qt2_close(struct usb_serial_port *port)
dev_err(&port->dev, "%s - close port failed %i\n",
__func__, i);
+ mutex_unlock(&port->serial->disc_mutex);
}
static void qt2_disconnect(struct usb_serial *serial)
{
struct qt2_serial_private *serial_priv = usb_get_serial_data(serial);
- struct qt2_port_private *port_priv;
- int i;
-
- if (serial_priv->read_urb->status == -EINPROGRESS)
- usb_kill_urb(serial_priv->read_urb);
-
- usb_free_urb(serial_priv->read_urb);
- for (i = 0; i < serial->num_ports; i++) {
- port_priv = usb_get_serial_port_data(serial->port[i]);
-
- if (port_priv->write_urb->status == -EINPROGRESS)
- usb_kill_urb(port_priv->write_urb);
- usb_free_urb(port_priv->write_urb);
- }
+ usb_kill_urb(serial_priv->read_urb);
}
static int get_serial_info(struct usb_serial_port *port,
@@ -773,11 +766,9 @@ static void qt2_read_bulk_callback(struct urb *urb)
static int qt2_setup_urbs(struct usb_serial *serial)
{
- struct usb_serial_port *port;
struct usb_serial_port *port0;
struct qt2_serial_private *serial_priv;
- struct qt2_port_private *port_priv;
- int pcount, status;
+ int status;
port0 = serial->port[0];
@@ -795,46 +786,21 @@ static int qt2_setup_urbs(struct usb_serial *serial)
sizeof(serial_priv->read_buffer),
qt2_read_bulk_callback, serial);
- /* setup write_urb for each port */
- for (pcount = 0; pcount < serial->num_ports; pcount++) {
-
- port = serial->port[pcount];
- port_priv = usb_get_serial_port_data(port);
-
- port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!port_priv->write_urb) {
- dev_err(&serial->dev->dev,
- "failed to alloc write_urb for port %i\n",
- pcount);
- return -ENOMEM;
- }
-
- usb_fill_bulk_urb(port_priv->write_urb,
- serial->dev,
- usb_sndbulkpipe(serial->dev,
- port0->
- bulk_out_endpointAddress),
- port_priv->write_buffer,
- sizeof(port_priv->write_buffer),
- qt2_write_bulk_callback, port);
- }
-
status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL);
if (status != 0) {
dev_err(&serial->dev->dev,
"%s - submit read urb failed %i\n", __func__, status);
+ usb_free_urb(serial_priv->read_urb);
return status;
}
return 0;
-
}
static int qt2_attach(struct usb_serial *serial)
{
struct qt2_serial_private *serial_priv;
- struct qt2_port_private *port_priv;
- int status, pcount;
+ int status;
/* power on unit */
status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
@@ -854,26 +820,6 @@ static int qt2_attach(struct usb_serial *serial)
usb_set_serial_data(serial, serial_priv);
- for (pcount = 0; pcount < serial->num_ports; pcount++) {
- port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
- if (!port_priv) {
- dev_err(&serial->dev->dev,
- "%s- kmalloc(%Zd) failed.\n", __func__,
- sizeof(*port_priv));
- pcount--;
- status = -ENOMEM;
- goto attach_failed;
- }
-
- spin_lock_init(&port_priv->lock);
- spin_lock_init(&port_priv->urb_lock);
- init_waitqueue_head(&port_priv->delta_msr_wait);
-
- port_priv->port = serial->port[pcount];
-
- usb_set_serial_port_data(serial->port[pcount], port_priv);
- }
-
status = qt2_setup_urbs(serial);
if (status != 0)
goto attach_failed;
@@ -881,14 +827,53 @@ static int qt2_attach(struct usb_serial *serial)
return 0;
attach_failed:
- for (/* empty */; pcount >= 0; pcount--) {
- port_priv = usb_get_serial_port_data(serial->port[pcount]);
- kfree(port_priv);
- }
kfree(serial_priv);
return status;
}
+static int qt2_port_probe(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct qt2_port_private *port_priv;
+ u8 bEndpointAddress;
+
+ port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
+ if (!port_priv)
+ return -ENOMEM;
+
+ spin_lock_init(&port_priv->lock);
+ spin_lock_init(&port_priv->urb_lock);
+ init_waitqueue_head(&port_priv->delta_msr_wait);
+ port_priv->port = port;
+
+ port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!port_priv->write_urb) {
+ kfree(port_priv);
+ return -ENOMEM;
+ }
+ bEndpointAddress = serial->port[0]->bulk_out_endpointAddress;
+ usb_fill_bulk_urb(port_priv->write_urb, serial->dev,
+ usb_sndbulkpipe(serial->dev, bEndpointAddress),
+ port_priv->write_buffer,
+ sizeof(port_priv->write_buffer),
+ qt2_write_bulk_callback, port);
+
+ usb_set_serial_port_data(port, port_priv);
+
+ return 0;
+}
+
+static int qt2_port_remove(struct usb_serial_port *port)
+{
+ struct qt2_port_private *port_priv;
+
+ port_priv = usb_get_serial_port_data(port);
+ usb_free_urb(port_priv->write_urb);
+ kfree(port_priv);
+
+ return 0;
+}
+
static int qt2_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
@@ -1127,6 +1112,8 @@ static struct usb_serial_driver qt2_device = {
.attach = qt2_attach,
.release = qt2_release,
.disconnect = qt2_disconnect,
+ .port_probe = qt2_port_probe,
+ .port_remove = qt2_port_remove,
.dtr_rts = qt2_dtr_rts,
.break_ctl = qt2_break_ctl,
.tiocmget = qt2_tiocmget,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 01d882cf377..270860f6bb2 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -161,7 +161,6 @@ static int sierra_probe(struct usb_serial *serial,
{
int result = 0;
struct usb_device *udev;
- struct sierra_intf_private *data;
u8 ifnum;
udev = serial->dev;
@@ -188,11 +187,6 @@ static int sierra_probe(struct usb_serial *serial,
return -ENODEV;
}
- data = serial->private = kzalloc(sizeof(struct sierra_intf_private), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
- spin_lock_init(&data->susp_lock);
-
return result;
}
@@ -884,11 +878,15 @@ static void sierra_dtr_rts(struct usb_serial_port *port, int on)
static int sierra_startup(struct usb_serial *serial)
{
- struct usb_serial_port *port;
- struct sierra_port_private *portdata;
- struct sierra_iface_info *himemoryp = NULL;
- int i;
- u8 ifnum;
+ struct sierra_intf_private *intfdata;
+
+ intfdata = kzalloc(sizeof(*intfdata), GFP_KERNEL);
+ if (!intfdata)
+ return -ENOMEM;
+
+ spin_lock_init(&intfdata->susp_lock);
+
+ usb_set_serial_data(serial, intfdata);
/* Set Device mode to D0 */
sierra_set_power_state(serial->dev, 0x0000);
@@ -897,68 +895,71 @@ static int sierra_startup(struct usb_serial *serial)
if (nmea)
sierra_vsc_set_nmea(serial->dev, 1);
- /* Now setup per port private data */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
- if (!portdata) {
- dev_dbg(&port->dev, "%s: kmalloc for "
- "sierra_port_private (%d) failed!\n",
- __func__, i);
- return -ENOMEM;
- }
- spin_lock_init(&portdata->lock);
- init_usb_anchor(&portdata->active);
- init_usb_anchor(&portdata->delayed);
- ifnum = i;
- /* Assume low memory requirements */
- portdata->num_out_urbs = N_OUT_URB;
- portdata->num_in_urbs = N_IN_URB;
-
- /* Determine actual memory requirements */
- if (serial->num_ports == 1) {
- /* Get interface number for composite device */
- ifnum = sierra_calc_interface(serial);
- himemoryp =
- (struct sierra_iface_info *)&typeB_interface_list;
- if (is_himemory(ifnum, himemoryp)) {
- portdata->num_out_urbs = N_OUT_URB_HM;
- portdata->num_in_urbs = N_IN_URB_HM;
- }
- }
- else {
- himemoryp =
- (struct sierra_iface_info *)&typeA_interface_list;
- if (is_himemory(i, himemoryp)) {
- portdata->num_out_urbs = N_OUT_URB_HM;
- portdata->num_in_urbs = N_IN_URB_HM;
- }
- }
- dev_dbg(&serial->dev->dev,
- "Memory usage (urbs) interface #%d, in=%d, out=%d\n",
- ifnum,portdata->num_in_urbs, portdata->num_out_urbs );
- /* Set the port private data pointer */
- usb_set_serial_port_data(port, portdata);
- }
-
return 0;
}
static void sierra_release(struct usb_serial *serial)
{
- int i;
- struct usb_serial_port *port;
+ struct sierra_intf_private *intfdata;
+
+ intfdata = usb_get_serial_data(serial);
+ kfree(intfdata);
+}
+
+static int sierra_port_probe(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
struct sierra_port_private *portdata;
+ const struct sierra_iface_info *himemoryp;
+ u8 ifnum;
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
- if (!port)
- continue;
- portdata = usb_get_serial_port_data(port);
- if (!portdata)
- continue;
- kfree(portdata);
+ portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
+ if (!portdata)
+ return -ENOMEM;
+
+ spin_lock_init(&portdata->lock);
+ init_usb_anchor(&portdata->active);
+ init_usb_anchor(&portdata->delayed);
+
+ /* Assume low memory requirements */
+ portdata->num_out_urbs = N_OUT_URB;
+ portdata->num_in_urbs = N_IN_URB;
+
+ /* Determine actual memory requirements */
+ if (serial->num_ports == 1) {
+ /* Get interface number for composite device */
+ ifnum = sierra_calc_interface(serial);
+ himemoryp = &typeB_interface_list;
+ } else {
+ /* This is really the usb-serial port number of the interface
+ * rather than the interface number.
+ */
+ ifnum = port->number - serial->minor;
+ himemoryp = &typeA_interface_list;
}
+
+ if (is_himemory(ifnum, himemoryp)) {
+ portdata->num_out_urbs = N_OUT_URB_HM;
+ portdata->num_in_urbs = N_IN_URB_HM;
+ }
+
+ dev_dbg(&port->dev,
+ "Memory usage (urbs) interface #%d, in=%d, out=%d\n",
+ ifnum, portdata->num_in_urbs, portdata->num_out_urbs);
+
+ usb_set_serial_port_data(port, portdata);
+
+ return 0;
+}
+
+static int sierra_port_remove(struct usb_serial_port *port)
+{
+ struct sierra_port_private *portdata;
+
+ portdata = usb_get_serial_port_data(port);
+ kfree(portdata);
+
+ return 0;
}
#ifdef CONFIG_PM
@@ -1062,6 +1063,8 @@ static struct usb_serial_driver sierra_device = {
.tiocmset = sierra_tiocmset,
.attach = sierra_startup,
.release = sierra_release,
+ .port_probe = sierra_port_probe,
+ .port_remove = sierra_port_remove,
.suspend = sierra_suspend,
.resume = sierra_resume,
.read_int_callback = sierra_instat_callback,
diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
index 1f034d2397c..684739b8efd 100644
--- a/drivers/usb/serial/usb-wwan.h
+++ b/drivers/usb/serial/usb-wwan.h
@@ -8,7 +8,7 @@
extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on);
extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port);
extern void usb_wwan_close(struct usb_serial_port *port);
-extern int usb_wwan_startup(struct usb_serial *serial);
+extern int usb_wwan_port_probe(struct usb_serial_port *port);
extern int usb_wwan_port_remove(struct usb_serial_port *port);
extern int usb_wwan_write_room(struct tty_struct *tty);
extern void usb_wwan_set_termios(struct tty_struct *tty,
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index e42aa398ed3..61a73ad1a18 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -447,10 +447,12 @@ void usb_wwan_close(struct usb_serial_port *port)
EXPORT_SYMBOL(usb_wwan_close);
/* Helper functions used by usb_wwan_setup_urbs */
-static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint,
+static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
+ int endpoint,
int dir, void *ctx, char *buf, int len,
void (*callback) (struct urb *))
{
+ struct usb_serial *serial = port->serial;
struct urb *urb;
if (endpoint == -1)
@@ -472,101 +474,75 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint,
return urb;
}
-/* Setup urbs */
-static void usb_wwan_setup_urbs(struct usb_serial *serial)
+int usb_wwan_port_probe(struct usb_serial_port *port)
{
- int i, j;
- struct usb_serial_port *port;
struct usb_wwan_port_private *portdata;
+ struct urb *urb;
+ u8 *buffer;
+ int err;
+ int i;
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- portdata = usb_get_serial_port_data(port);
+ portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
+ if (!portdata)
+ return -ENOMEM;
- /* Do indat endpoints first */
- for (j = 0; j < N_IN_URB; ++j) {
- portdata->in_urbs[j] = usb_wwan_setup_urb(serial,
- port->
- bulk_in_endpointAddress,
- USB_DIR_IN,
- port,
- portdata->
- in_buffer[j],
- IN_BUFLEN,
- usb_wwan_indat_callback);
- }
+ init_usb_anchor(&portdata->delayed);
- /* outdat endpoints */
- for (j = 0; j < N_OUT_URB; ++j) {
- portdata->out_urbs[j] = usb_wwan_setup_urb(serial,
- port->
- bulk_out_endpointAddress,
- USB_DIR_OUT,
- port,
- portdata->
- out_buffer
- [j],
- OUT_BUFLEN,
- usb_wwan_outdat_callback);
- }
+ for (i = 0; i < N_IN_URB; i++) {
+ buffer = (u8 *)__get_free_page(GFP_KERNEL);
+ if (!buffer)
+ goto bail_out_error;
+ portdata->in_buffer[i] = buffer;
+
+ urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress,
+ USB_DIR_IN, port,
+ buffer, IN_BUFLEN,
+ usb_wwan_indat_callback);
+ portdata->in_urbs[i] = urb;
}
-}
-
-int usb_wwan_startup(struct usb_serial *serial)
-{
- int i, j, err;
- struct usb_serial_port *port;
- struct usb_wwan_port_private *portdata;
- u8 *buffer;
- /* Now setup per port private data */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
- if (!portdata) {
- dev_dbg(&port->dev, "%s: kmalloc for usb_wwan_port_private (%d) failed!.\n",
- __func__, i);
- return 1;
- }
- init_usb_anchor(&portdata->delayed);
+ for (i = 0; i < N_OUT_URB; i++) {
+ if (port->bulk_out_endpointAddress == -1)
+ continue;
- for (j = 0; j < N_IN_URB; j++) {
- buffer = (u8 *) __get_free_page(GFP_KERNEL);
- if (!buffer)
- goto bail_out_error;
- portdata->in_buffer[j] = buffer;
- }
+ buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
+ if (!buffer)
+ goto bail_out_error2;
+ portdata->out_buffer[i] = buffer;
- for (j = 0; j < N_OUT_URB; j++) {
- buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
- if (!buffer)
- goto bail_out_error2;
- portdata->out_buffer[j] = buffer;
- }
+ urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress,
+ USB_DIR_OUT, port,
+ buffer, OUT_BUFLEN,
+ usb_wwan_outdat_callback);
+ portdata->out_urbs[i] = urb;
+ }
- usb_set_serial_port_data(port, portdata);
+ usb_set_serial_port_data(port, portdata);
- if (!port->interrupt_in_urb)
- continue;
+ if (port->interrupt_in_urb) {
err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (err)
dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n",
__func__, err);
}
- usb_wwan_setup_urbs(serial);
+
return 0;
bail_out_error2:
- for (j = 0; j < N_OUT_URB; j++)
- kfree(portdata->out_buffer[j]);
+ for (i = 0; i < N_OUT_URB; i++) {
+ usb_free_urb(portdata->out_urbs[i]);
+ kfree(portdata->out_buffer[i]);
+ }
bail_out_error:
- for (j = 0; j < N_IN_URB; j++)
- if (portdata->in_buffer[j])
- free_page((unsigned long)portdata->in_buffer[j]);
+ for (i = 0; i < N_IN_URB; i++) {
+ usb_free_urb(portdata->in_urbs[i]);
+ free_page((unsigned long)portdata->in_buffer[i]);
+ }
kfree(portdata);
- return 1;
+
+ return -ENOMEM;
}
-EXPORT_SYMBOL(usb_wwan_startup);
+EXPORT_SYMBOL_GPL(usb_wwan_port_probe);
int usb_wwan_port_remove(struct usb_serial_port *port)
{
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 346c7efc20b..b9fca3586d7 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -83,6 +83,8 @@ static int whiteheat_firmware_attach(struct usb_serial *serial);
/* function prototypes for the Connect Tech WhiteHEAT serial converter */
static int whiteheat_attach(struct usb_serial *serial);
static void whiteheat_release(struct usb_serial *serial);
+static int whiteheat_port_probe(struct usb_serial_port *port);
+static int whiteheat_port_remove(struct usb_serial_port *port);
static int whiteheat_open(struct tty_struct *tty,
struct usb_serial_port *port);
static void whiteheat_close(struct usb_serial_port *port);
@@ -117,6 +119,8 @@ static struct usb_serial_driver whiteheat_device = {
.num_ports = 4,
.attach = whiteheat_attach,
.release = whiteheat_release,
+ .port_probe = whiteheat_port_probe,
+ .port_remove = whiteheat_port_remove,
.open = whiteheat_open,
.close = whiteheat_close,
.ioctl = whiteheat_ioctl,
@@ -218,15 +222,12 @@ static int whiteheat_attach(struct usb_serial *serial)
{
struct usb_serial_port *command_port;
struct whiteheat_command_private *command_info;
- struct usb_serial_port *port;
- struct whiteheat_private *info;
struct whiteheat_hw_info *hw_info;
int pipe;
int ret;
int alen;
__u8 *command;
__u8 *result;
- int i;
command_port = serial->port[COMMAND_PORT];
@@ -285,22 +286,6 @@ static int whiteheat_attach(struct usb_serial *serial)
serial->type->description,
hw_info->sw_major_rev, hw_info->sw_minor_rev);
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
-
- info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
- if (info == NULL) {
- dev_err(&port->dev,
- "%s: Out of memory for port structures\n",
- serial->type->description);
- goto no_private;
- }
-
- info->mcr = 0;
-
- usb_set_serial_port_data(port, info);
- }
-
command_info = kmalloc(sizeof(struct whiteheat_command_private),
GFP_KERNEL);
if (command_info == NULL) {
@@ -333,16 +318,10 @@ no_firmware:
"%s: please contact support@connecttech.com\n",
serial->type->description);
kfree(result);
+ kfree(command);
return -ENODEV;
no_command_private:
- for (i = serial->num_ports - 1; i >= 0; i--) {
- port = serial->port[i];
- info = usb_get_serial_port_data(port);
- kfree(info);
-no_private:
- ;
- }
kfree(result);
no_result_buffer:
kfree(command);
@@ -350,21 +329,36 @@ no_command_buffer:
return -ENOMEM;
}
-
static void whiteheat_release(struct usb_serial *serial)
{
struct usb_serial_port *command_port;
- struct whiteheat_private *info;
- int i;
/* free up our private data for our command port */
command_port = serial->port[COMMAND_PORT];
kfree(usb_get_serial_port_data(command_port));
+}
- for (i = 0; i < serial->num_ports; i++) {
- info = usb_get_serial_port_data(serial->port[i]);
- kfree(info);
- }
+static int whiteheat_port_probe(struct usb_serial_port *port)
+{
+ struct whiteheat_private *info;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ usb_set_serial_port_data(port, info);
+
+ return 0;
+}
+
+static int whiteheat_port_remove(struct usb_serial_port *port)
+{
+ struct whiteheat_private *info;
+
+ info = usb_get_serial_port_data(port);
+ kfree(info);
+
+ return 0;
}
static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-03 02:45:27 +0000