diff options
Diffstat (limited to 'drivers/usb/serial/whiteheat.c')
| -rw-r--r-- | drivers/usb/serial/whiteheat.c | 1199 |
1 files changed, 258 insertions, 941 deletions
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 38726ef3132..e62f2dff8b7 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -12,62 +12,12 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * - * See Documentation/usb/usb-serial.txt for more information on using this driver - * - * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com) - * Upgrade to full working driver - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. - * - * (04/08/2001) gb - * Identify version on module load. - * - * 2001_Mar_19 gkh - * Fixed MOD_INC and MOD_DEC logic, the ability to open a port more - * than once, and the got the proper usb_device_id table entries so - * the driver works again. - * - * (11/01/2000) Adam J. Richter - * usb_device_id table support - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (10/03/2000) smd - * firmware is improved to guard against crap sent to device - * firmware now replies CMD_FAILURE on bad things - * read_callback fix you provided for private info struct - * command_finished now indicates success or fail - * setup_port struct now packed to avoid gcc padding - * firmware uses 1 based port numbering, driver now handles that - * - * (09/11/2000) gkh - * Removed DEBUG #ifdefs with call to usb_serial_debug_data - * - * (07/19/2000) gkh - * Added module_init and module_exit functions to handle the fact that this - * driver is a loadable module now. - * Fixed bug with port->minor that was found by Al Borchers - * - * (07/04/2000) gkh - * Added support for port settings. Baud rate can now be changed. Line signals - * are not transferred to and from the tty layer yet, but things seem to be - * working well now. - * - * (05/04/2000) gkh - * First cut at open and close commands. Data can flow through the ports at - * default speeds now. - * - * (03/26/2000) gkh - * Split driver up into device specific pieces. - * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver */ #include <linux/kernel.h> #include <linux/errno.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/tty.h> #include <linux/tty_driver.h> @@ -75,17 +25,15 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/mutex.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <asm/termbits.h> #include <linux/usb.h> #include <linux/serial_reg.h> #include <linux/serial.h> #include <linux/usb/serial.h> -#include "whiteheat_fw.h" /* firmware for the ConnectTech WhiteHEAT device */ +#include <linux/usb/ezusb.h> #include "whiteheat.h" /* WhiteHEAT specific commands */ -static int debug; - #ifndef CMSPAR #define CMSPAR 0 #endif @@ -93,7 +41,6 @@ static int debug; /* * Version Information */ -#define DRIVER_VERSION "v2.0" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>" #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver" @@ -108,53 +55,46 @@ static int debug; separate ID tables, and then a third table that combines them just for the purpose of exporting the autoloading information. */ -static struct usb_device_id id_table_std [] = { +static const struct usb_device_id id_table_std[] = { { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_prerenumeration [] = { +static const struct usb_device_id id_table_prerenumeration[] = { { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, { } /* Terminating entry */ }; -static struct usb_device_id id_table_combined [] = { +static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, id_table_combined); +MODULE_DEVICE_TABLE(usb, id_table_combined); -static struct usb_driver whiteheat_driver = { - .name = "whiteheat", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table_combined, - .no_dynamic_id = 1, -}; /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ -static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id); -static int whiteheat_firmware_attach (struct usb_serial *serial); +static int whiteheat_firmware_download(struct usb_serial *serial, + const struct usb_device_id *id); +static int whiteheat_firmware_attach(struct usb_serial *serial); /* function prototypes for the Connect Tech WhiteHEAT serial converter */ -static int whiteheat_attach (struct usb_serial *serial); -static void whiteheat_shutdown (struct usb_serial *serial); -static int whiteheat_open (struct usb_serial_port *port, struct file *filp); -static void whiteheat_close (struct usb_serial_port *port, struct file *filp); -static int whiteheat_write (struct usb_serial_port *port, const unsigned char *buf, int count); -static int whiteheat_write_room (struct usb_serial_port *port); -static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); -static void whiteheat_set_termios (struct usb_serial_port *port, struct ktermios * old); -static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file); -static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear); -static void whiteheat_break_ctl (struct usb_serial_port *port, int break_state); -static int whiteheat_chars_in_buffer (struct usb_serial_port *port); -static void whiteheat_throttle (struct usb_serial_port *port); -static void whiteheat_unthrottle (struct usb_serial_port *port); -static void whiteheat_read_callback (struct urb *urb); -static void whiteheat_write_callback (struct urb *urb); +static int whiteheat_attach(struct usb_serial *serial); +static void whiteheat_release(struct usb_serial *serial); +static int whiteheat_port_probe(struct usb_serial_port *port); +static int whiteheat_port_remove(struct usb_serial_port *port); +static int whiteheat_open(struct tty_struct *tty, + struct usb_serial_port *port); +static void whiteheat_close(struct usb_serial_port *port); +static int whiteheat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg); +static void whiteheat_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static int whiteheat_tiocmget(struct tty_struct *tty); +static int whiteheat_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static void whiteheat_break_ctl(struct tty_struct *tty, int break_state); static struct usb_serial_driver whiteheat_fake_device = { .driver = { @@ -162,11 +102,7 @@ static struct usb_serial_driver whiteheat_fake_device = { .name = "whiteheatnofirm", }, .description = "Connect Tech - WhiteHEAT - (prerenumeration)", - .usb_driver = &whiteheat_driver, .id_table = id_table_prerenumeration, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, .num_ports = 1, .probe = whiteheat_firmware_download, .attach = whiteheat_firmware_attach, @@ -178,62 +114,39 @@ static struct usb_serial_driver whiteheat_device = { .name = "whiteheat", }, .description = "Connect Tech - WhiteHEAT", - .usb_driver = &whiteheat_driver, .id_table = id_table_std, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, .num_ports = 4, .attach = whiteheat_attach, - .shutdown = whiteheat_shutdown, + .release = whiteheat_release, + .port_probe = whiteheat_port_probe, + .port_remove = whiteheat_port_remove, .open = whiteheat_open, .close = whiteheat_close, - .write = whiteheat_write, - .write_room = whiteheat_write_room, .ioctl = whiteheat_ioctl, .set_termios = whiteheat_set_termios, .break_ctl = whiteheat_break_ctl, .tiocmget = whiteheat_tiocmget, .tiocmset = whiteheat_tiocmset, - .chars_in_buffer = whiteheat_chars_in_buffer, - .throttle = whiteheat_throttle, - .unthrottle = whiteheat_unthrottle, - .read_bulk_callback = whiteheat_read_callback, - .write_bulk_callback = whiteheat_write_callback, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, }; +static struct usb_serial_driver * const serial_drivers[] = { + &whiteheat_fake_device, &whiteheat_device, NULL +}; struct whiteheat_command_private { struct mutex mutex; __u8 port_running; __u8 command_finished; - wait_queue_head_t wait_command; /* for handling sleeping while waiting for a command to finish */ + wait_queue_head_t wait_command; /* for handling sleeping whilst + waiting for a command to + finish */ __u8 result_buffer[64]; }; - -#define THROTTLED 0x01 -#define ACTUALLY_THROTTLED 0x02 - -static int urb_pool_size = 8; - -struct whiteheat_urb_wrap { - struct list_head list; - struct urb *urb; -}; - struct whiteheat_private { - spinlock_t lock; - __u8 flags; - __u8 mcr; - struct list_head rx_urbs_free; - struct list_head rx_urbs_submitted; - struct list_head rx_urb_q; - struct work_struct rx_work; - struct usb_serial_port *port; - struct list_head tx_urbs_free; - struct list_head tx_urbs_submitted; - struct mutex deathwarrant; + __u8 mcr; /* FIXME: no locking on mcr */ }; @@ -243,15 +156,11 @@ static void stop_command_port(struct usb_serial *serial); static void command_port_write_callback(struct urb *urb); static void command_port_read_callback(struct urb *urb); -static int start_port_read(struct usb_serial_port *port); -static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, struct list_head *head); -static struct list_head *list_first(struct list_head *head); -static void rx_data_softint(struct work_struct *work); - -static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize); +static int firm_send_command(struct usb_serial_port *port, __u8 command, + __u8 *data, __u8 datasize); static int firm_open(struct usb_serial_port *port); static int firm_close(struct usb_serial_port *port); -static int firm_setup_port(struct usb_serial_port *port); +static void firm_setup_port(struct tty_struct *tty); static int firm_set_rts(struct usb_serial_port *port, __u8 onoff); static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff); static int firm_set_break(struct usb_serial_port *port, __u8 onoff); @@ -283,65 +192,22 @@ static int firm_report_tx_done(struct usb_serial_port *port); - device renumerated itself and comes up as new device id with all firmware download completed. */ -static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id) +static int whiteheat_firmware_download(struct usb_serial *serial, + const struct usb_device_id *id) { int response; - const struct whiteheat_hex_record *record; - - dbg("%s", __FUNCTION__); - - response = ezusb_set_reset (serial, 1); - - record = &whiteheat_loader[0]; - while (record->address != 0xffff) { - response = ezusb_writememory (serial, record->address, - (unsigned char *)record->data, record->data_size, 0xa0); - if (response < 0) { - err("%s - ezusb_writememory failed for loader (%d %04X %p %d)", - __FUNCTION__, response, record->address, record->data, record->data_size); - break; - } - ++record; - } - response = ezusb_set_reset (serial, 0); - - record = &whiteheat_firmware[0]; - while (record->address < 0x1b40) { - ++record; - } - while (record->address != 0xffff) { - response = ezusb_writememory (serial, record->address, - (unsigned char *)record->data, record->data_size, 0xa3); - if (response < 0) { - err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)", - __FUNCTION__, response, record->address, record->data, record->data_size); - break; - } - ++record; + response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw"); + if (response >= 0) { + response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw"); + if (response >= 0) + return 0; } - - response = ezusb_set_reset (serial, 1); - - record = &whiteheat_firmware[0]; - while (record->address < 0x1b40) { - response = ezusb_writememory (serial, record->address, - (unsigned char *)record->data, record->data_size, 0xa0); - if (response < 0) { - err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)", - __FUNCTION__, response, record->address, record->data, record->data_size); - break; - } - ++record; - } - - response = ezusb_set_reset (serial, 0); - - return 0; + return -ENOENT; } -static int whiteheat_firmware_attach (struct usb_serial *serial) +static int whiteheat_firmware_attach(struct usb_serial *serial) { /* We want this device to fail to have a driver assigned to it */ return 1; @@ -351,152 +217,78 @@ static int whiteheat_firmware_attach (struct usb_serial *serial) /***************************************************************************** * Connect Tech's White Heat serial driver functions *****************************************************************************/ -static int whiteheat_attach (struct usb_serial *serial) +static int whiteheat_attach(struct usb_serial *serial) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; - struct usb_serial_port *port; - struct whiteheat_private *info; struct whiteheat_hw_info *hw_info; int pipe; int ret; int alen; __u8 *command; __u8 *result; - int i; - int j; - struct urb *urb; - int buf_size; - struct whiteheat_urb_wrap *wrap; - struct list_head *tmp; command_port = serial->port[COMMAND_PORT]; - pipe = usb_sndbulkpipe (serial->dev, command_port->bulk_out_endpointAddress); + pipe = usb_sndbulkpipe(serial->dev, + command_port->bulk_out_endpointAddress); command = kmalloc(2, GFP_KERNEL); if (!command) goto no_command_buffer; command[0] = WHITEHEAT_GET_HW_INFO; command[1] = 0; - + result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL); if (!result) goto no_result_buffer; /* * When the module is reloaded the firmware is still there and * the endpoints are still in the usb core unchanged. This is the - * unlinking bug in disguise. Same for the call below. - */ + * unlinking bug in disguise. Same for the call below. + */ usb_clear_halt(serial->dev, pipe); - ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS); + ret = usb_bulk_msg(serial->dev, pipe, command, 2, + &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't send command [%d]", serial->type->description, ret); + dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n", + serial->type->description, ret); goto no_firmware; } else if (alen != 2) { - err("%s: Send command incomplete [%d]", serial->type->description, alen); + dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n", + serial->type->description, alen); goto no_firmware; } - pipe = usb_rcvbulkpipe (serial->dev, command_port->bulk_in_endpointAddress); + pipe = usb_rcvbulkpipe(serial->dev, + command_port->bulk_in_endpointAddress); /* See the comment on the usb_clear_halt() above */ usb_clear_halt(serial->dev, pipe); - ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); + ret = usb_bulk_msg(serial->dev, pipe, result, + sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't get results [%d]", serial->type->description, ret); + dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n", + serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(*hw_info) + 1) { - err("%s: Get results incomplete [%d]", serial->type->description, alen); + dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n", + serial->type->description, alen); goto no_firmware; } else if (result[0] != command[0]) { - err("%s: Command failed [%d]", serial->type->description, result[0]); + dev_err(&serial->dev->dev, "%s: Command failed [%d]\n", + serial->type->description, result[0]); goto no_firmware; } hw_info = (struct whiteheat_hw_info *)&result[1]; - info("%s: Driver %s: Firmware v%d.%02d", serial->type->description, - DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev); - - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; + dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n", + serial->type->description, + hw_info->sw_major_rev, hw_info->sw_minor_rev); - info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); - if (info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->description); - goto no_private; - } - - spin_lock_init(&info->lock); - mutex_init(&info->deathwarrant); - info->flags = 0; - info->mcr = 0; - INIT_WORK(&info->rx_work, rx_data_softint); - info->port = port; - - INIT_LIST_HEAD(&info->rx_urbs_free); - INIT_LIST_HEAD(&info->rx_urbs_submitted); - INIT_LIST_HEAD(&info->rx_urb_q); - INIT_LIST_HEAD(&info->tx_urbs_free); - INIT_LIST_HEAD(&info->tx_urbs_submitted); - - for (j = 0; j < urb_pool_size; j++) { - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - err("No free urbs available"); - goto no_rx_urb; - } - buf_size = port->read_urb->transfer_buffer_length; - urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL); - if (!urb->transfer_buffer) { - err("Couldn't allocate urb buffer"); - goto no_rx_buf; - } - wrap = kmalloc(sizeof(*wrap), GFP_KERNEL); - if (!wrap) { - err("Couldn't allocate urb wrapper"); - goto no_rx_wrap; - } - usb_fill_bulk_urb(urb, serial->dev, - usb_rcvbulkpipe(serial->dev, - port->bulk_in_endpointAddress), - urb->transfer_buffer, buf_size, - whiteheat_read_callback, port); - wrap->urb = urb; - list_add(&wrap->list, &info->rx_urbs_free); - - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - err("No free urbs available"); - goto no_tx_urb; - } - buf_size = port->write_urb->transfer_buffer_length; - urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL); - if (!urb->transfer_buffer) { - err("Couldn't allocate urb buffer"); - goto no_tx_buf; - } - wrap = kmalloc(sizeof(*wrap), GFP_KERNEL); - if (!wrap) { - err("Couldn't allocate urb wrapper"); - goto no_tx_wrap; - } - usb_fill_bulk_urb(urb, serial->dev, - usb_sndbulkpipe(serial->dev, - port->bulk_out_endpointAddress), - urb->transfer_buffer, buf_size, - whiteheat_write_callback, port); - wrap->urb = urb; - list_add(&wrap->list, &info->tx_urbs_free); - } - - usb_set_serial_port_data(port, info); - } - - command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); - if (command_info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->description); + command_info = kmalloc(sizeof(struct whiteheat_command_private), + GFP_KERNEL); + if (!command_info) goto no_command_private; - } mutex_init(&command_info->mutex); command_info->port_running = 0; @@ -511,43 +303,20 @@ static int whiteheat_attach (struct usb_serial *serial) no_firmware: /* Firmware likely not running */ - err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description); - err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description); - err("%s: please contact support@connecttech.com\n", serial->type->description); + dev_err(&serial->dev->dev, + "%s: Unable to retrieve firmware version, try replugging\n", + serial->type->description); + dev_err(&serial->dev->dev, + "%s: If the firmware is not running (status led not blinking)\n", + serial->type->description); + dev_err(&serial->dev->dev, + "%s: please contact support@connecttech.com\n", + serial->type->description); kfree(result); + kfree(command); return -ENODEV; no_command_private: - for (i = serial->num_ports - 1; i >= 0; i--) { - port = serial->port[i]; - info = usb_get_serial_port_data(port); - for (j = urb_pool_size - 1; j >= 0; j--) { - tmp = list_first(&info->tx_urbs_free); - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - kfree(wrap); -no_tx_wrap: - kfree(urb->transfer_buffer); -no_tx_buf: - usb_free_urb(urb); -no_tx_urb: - tmp = list_first(&info->rx_urbs_free); - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - kfree(wrap); -no_rx_wrap: - kfree(urb->transfer_buffer); -no_rx_buf: - usb_free_urb(urb); -no_rx_urb: - ; - } - kfree(info); -no_private: - ; - } kfree(result); no_result_buffer: kfree(command); @@ -555,63 +324,46 @@ no_command_buffer: return -ENOMEM; } - -static void whiteheat_shutdown (struct usb_serial *serial) +static void whiteheat_release(struct usb_serial *serial) { struct usb_serial_port *command_port; - struct usb_serial_port *port; - struct whiteheat_private *info; - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - struct list_head *tmp; - struct list_head *tmp2; - int i; - - dbg("%s", __FUNCTION__); /* free up our private data for our command port */ command_port = serial->port[COMMAND_PORT]; - kfree (usb_get_serial_port_data(command_port)); - - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - info = usb_get_serial_port_data(port); - list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) { - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - kfree(wrap); - kfree(urb->transfer_buffer); - usb_free_urb(urb); - } - list_for_each_safe(tmp, tmp2, &info->tx_urbs_free) { - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - kfree(wrap); - kfree(urb->transfer_buffer); - usb_free_urb(urb); - } - kfree(info); - } - - return; + kfree(usb_get_serial_port_data(command_port)); } +static int whiteheat_port_probe(struct usb_serial_port *port) +{ + struct whiteheat_private *info; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + usb_set_serial_port_data(port, info); -static int whiteheat_open (struct usb_serial_port *port, struct file *filp) + return 0; +} + +static int whiteheat_port_remove(struct usb_serial_port *port) { - int retval = 0; - struct ktermios old_term; + struct whiteheat_private *info; - dbg("%s - port %d", __FUNCTION__, port->number); + info = usb_get_serial_port_data(port); + kfree(info); + + return 0; +} + +static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int retval; retval = start_command_port(port->serial); if (retval) goto exit; - port->tty->low_latency = 1; - /* send an open port command */ retval = firm_open(port); if (retval) { @@ -626,186 +378,40 @@ static int whiteheat_open (struct usb_serial_port *port, struct file *filp) goto exit; } - old_term.c_cflag = ~port->tty->termios->c_cflag; - old_term.c_iflag = ~port->tty->termios->c_iflag; - whiteheat_set_termios(port, &old_term); + if (tty) + firm_setup_port(tty); /* Work around HCD bugs */ usb_clear_halt(port->serial->dev, port->read_urb->pipe); usb_clear_halt(port->serial->dev, port->write_urb->pipe); - /* Start reading from the device */ - retval = start_port_read(port); + retval = usb_serial_generic_open(tty, port); if (retval) { - err("%s - failed submitting read urb, error %d", __FUNCTION__, retval); firm_close(port); stop_command_port(port->serial); goto exit; } - exit: - dbg("%s - exit, retval = %d", __FUNCTION__, retval); return retval; } -static void whiteheat_close(struct usb_serial_port *port, struct file * filp) +static void whiteheat_close(struct usb_serial_port *port) { - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - struct list_head *tmp; - struct list_head *tmp2; - - dbg("%s - port %d", __FUNCTION__, port->number); - - mutex_lock(&port->serial->disc_mutex); - /* filp is NULL when called from usb_serial_disconnect */ - if ((filp && (tty_hung_up_p(filp))) || port->serial->disconnected) { - mutex_unlock(&port->serial->disc_mutex); - return; - } - mutex_unlock(&port->serial->disc_mutex); - - port->tty->closing = 1; - -/* - * Not currently in use; tty_wait_until_sent() calls - * serial_chars_in_buffer() which deadlocks on the second semaphore - * acquisition. This should be fixed at some point. Greg's been - * notified. - if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) { - tty_wait_until_sent(port->tty, CLOSING_DELAY); - } -*/ - - if (port->tty->driver->flush_buffer) - port->tty->driver->flush_buffer(port->tty); - tty_ldisc_flush(port->tty); - firm_report_tx_done(port); - firm_close(port); -printk(KERN_ERR"Before processing rx_urbs_submitted.\n"); - /* shutdown our bulk reads and writes */ - mutex_lock(&info->deathwarrant); - spin_lock_irq(&info->lock); - list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - list_del(tmp); - spin_unlock_irq(&info->lock); - usb_kill_urb(urb); - spin_lock_irq(&info->lock); - list_add(tmp, &info->rx_urbs_free); - } - list_for_each_safe(tmp, tmp2, &info->rx_urb_q) - list_move(tmp, &info->rx_urbs_free); - list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - list_del(tmp); - spin_unlock_irq(&info->lock); - usb_kill_urb(urb); - spin_lock_irq(&info->lock); - list_add(tmp, &info->tx_urbs_free); - } - spin_unlock_irq(&info->lock); - mutex_unlock(&info->deathwarrant); + usb_serial_generic_close(port); stop_command_port(port->serial); - - port->tty->closing = 0; } - -static int whiteheat_write(struct usb_serial_port *port, const unsigned char *buf, int count) -{ - struct usb_serial *serial = port->serial; - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - int result; - int bytes; - int sent = 0; - unsigned long flags; - struct list_head *tmp; - - dbg("%s - port %d", __FUNCTION__, port->number); - - if (count == 0) { - dbg("%s - write request of 0 bytes", __FUNCTION__); - return (0); - } - - while (count) { - spin_lock_irqsave(&info->lock, flags); - if (list_empty(&info->tx_urbs_free)) { - spin_unlock_irqrestore(&info->lock, flags); - break; - } - tmp = list_first(&info->tx_urbs_free); - list_del(tmp); - spin_unlock_irqrestore(&info->lock, flags); - - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - bytes = (count > port->bulk_out_size) ? port->bulk_out_size : count; - memcpy (urb->transfer_buffer, buf + sent, bytes); - - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, bytes, urb->transfer_buffer); - - urb->dev = serial->dev; - urb->transfer_buffer_length = bytes; - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result) { - err("%s - failed submitting write urb, error %d", __FUNCTION__, result); - sent = result; - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->tx_urbs_free); - spin_unlock_irqrestore(&info->lock, flags); - break; - } else { - sent += bytes; - count -= bytes; - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->tx_urbs_submitted); - spin_unlock_irqrestore(&info->lock, flags); - } - } - - return sent; -} - - -static int whiteheat_write_room(struct usb_serial_port *port) -{ - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct list_head *tmp; - int room = 0; - unsigned long flags; - - dbg("%s - port %d", __FUNCTION__, port->number); - - spin_lock_irqsave(&info->lock, flags); - list_for_each(tmp, &info->tx_urbs_free) - room++; - spin_unlock_irqrestore(&info->lock, flags); - room *= port->bulk_out_size; - - dbg("%s - returns %d", __FUNCTION__, room); - return (room); -} - - -static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file) +static int whiteheat_tiocmget(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); unsigned int modem_signals = 0; - dbg("%s - port %d", __FUNCTION__, port->number); - firm_get_dtr_rts(port); if (info->mcr & UART_MCR_DTR) modem_signals |= TIOCM_DTR; @@ -815,14 +421,12 @@ static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file) return modem_signals; } - -static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file, +static int whiteheat_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); - dbg("%s - port %d", __FUNCTION__, port->number); - if (set & TIOCM_RTS) info->mcr |= UART_MCR_RTS; if (set & TIOCM_DTR) @@ -839,117 +443,47 @@ static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file, } -static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) +static int whiteheat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct serial_struct serstruct; void __user *user_arg = (void __user *)arg; - dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd); - switch (cmd) { - case TIOCGSERIAL: - memset(&serstruct, 0, sizeof(serstruct)); - serstruct.type = PORT_16654; - serstruct.line = port->serial->minor; - serstruct.port = port->number; - serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - serstruct.xmit_fifo_size = port->bulk_out_size; - serstruct.custom_divisor = 0; - serstruct.baud_base = 460800; - serstruct.close_delay = CLOSING_DELAY; - serstruct.closing_wait = CLOSING_DELAY; - - if (copy_to_user(user_arg, &serstruct, sizeof(serstruct))) - return -EFAULT; - - break; - - case TIOCSSERIAL: - if (copy_from_user(&serstruct, user_arg, sizeof(serstruct))) - return -EFAULT; - - /* - * For now this is ignored. dip sets the ASYNC_[V]HI flags - * but this isn't used by us at all. Maybe someone somewhere - * will need the custom_divisor setting. - */ - - break; - - default: - break; + case TIOCGSERIAL: + memset(&serstruct, 0, sizeof(serstruct)); + serstruct.type = PORT_16654; + serstruct.line = port->minor; + serstruct.port = port->port_number; + serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo); + serstruct.custom_divisor = 0; + serstruct.baud_base = 460800; + serstruct.close_delay = CLOSING_DELAY; + serstruct.closing_wait = CLOSING_DELAY; + + if (copy_to_user(user_arg, &serstruct, sizeof(serstruct))) + return -EFAULT; + break; + default: + break; } return -ENOIOCTLCMD; } -static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios) -{ - dbg("%s -port %d", __FUNCTION__, port->number); - firm_setup_port(port); -} - - -static void whiteheat_break_ctl(struct usb_serial_port *port, int break_state) { - firm_set_break(port, break_state); -} - - -static int whiteheat_chars_in_buffer(struct usb_serial_port *port) +static void whiteheat_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct list_head *tmp; - struct whiteheat_urb_wrap *wrap; - int chars = 0; - unsigned long flags; - - dbg("%s - port %d", __FUNCTION__, port->number); - - spin_lock_irqsave(&info->lock, flags); - list_for_each(tmp, &info->tx_urbs_submitted) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - chars += wrap->urb->transfer_buffer_length; - } - spin_unlock_irqrestore(&info->lock, flags); - - dbg ("%s - returns %d", __FUNCTION__, chars); - return chars; + firm_setup_port(tty); } - -static void whiteheat_throttle (struct usb_serial_port *port) +static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) { - struct whiteheat_private *info = usb_get_serial_port_data(port); - unsigned long flags; - - dbg("%s - port %d", __FUNCTION__, port->number); - - spin_lock_irqsave(&info->lock, flags); - info->flags |= THROTTLED; - spin_unlock_irqrestore(&info->lock, flags); - - return; -} - - -static void whiteheat_unthrottle (struct usb_serial_port *port) -{ - struct whiteheat_private *info = usb_get_serial_port_data(port); - int actually_throttled; - unsigned long flags; - - dbg("%s - port %d", __FUNCTION__, port->number); - - spin_lock_irqsave(&info->lock, flags); - actually_throttled = info->flags & ACTUALLY_THROTTLED; - info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED); - spin_unlock_irqrestore(&info->lock, flags); - - if (actually_throttled) - rx_data_softint(&info->rx_work); - - return; + struct usb_serial_port *port = tty->driver_data; + firm_set_break(port, break_state); } @@ -960,10 +494,8 @@ static void command_port_write_callback(struct urb *urb) { int status = urb->status; - dbg("%s", __FUNCTION__); - if (status) { - dbg("nonzero urb status: %d", status); + dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status); return; } } @@ -971,28 +503,26 @@ static void command_port_write_callback(struct urb *urb) static void command_port_read_callback(struct urb *urb) { - struct usb_serial_port *command_port = (struct usb_serial_port *)urb->context; + struct usb_serial_port *command_port = urb->context; struct whiteheat_command_private *command_info; int status = urb->status; unsigned char *data = urb->transfer_buffer; int result; - dbg("%s", __FUNCTION__); - command_info = usb_get_serial_port_data(command_port); if (!command_info) { - dbg ("%s - command_info is NULL, exiting.", __FUNCTION__); + dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__); return; } if (status) { - dbg("%s - nonzero urb status: %d", __FUNCTION__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status); if (status != -ENOENT) command_info->command_finished = WHITEHEAT_CMD_FAILURE; wake_up(&command_info->wait_command); return; } - usb_serial_debug_data(debug, &command_port->dev, __FUNCTION__, urb->actual_length, data); + usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data); if (data[0] == WHITEHEAT_CMD_COMPLETE) { command_info->command_finished = WHITEHEAT_CMD_COMPLETE; @@ -1001,124 +531,53 @@ static void command_port_read_callback(struct urb *urb) command_info->command_finished = WHITEHEAT_CMD_FAILURE; wake_up(&command_info->wait_command); } else if (data[0] == WHITEHEAT_EVENT) { - /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */ - dbg("%s - event received", __FUNCTION__); + /* These are unsolicited reports from the firmware, hence no + waiting command to wakeup */ + dev_dbg(&urb->dev->dev, "%s - event received\n", __func__); } else if (data[0] == WHITEHEAT_GET_DTR_RTS) { - memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1); + memcpy(command_info->result_buffer, &data[1], + urb->actual_length - 1); command_info->command_finished = WHITEHEAT_CMD_COMPLETE; wake_up(&command_info->wait_command); - } else { - dbg("%s - bad reply from firmware", __FUNCTION__); - } - + } else + dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__); + /* Continue trying to always read */ - command_port->read_urb->dev = command_port->serial->dev; result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); if (result) - dbg("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); -} - - -static void whiteheat_read_callback(struct urb *urb) -{ - struct usb_serial_port *port = (struct usb_serial_port *)urb->context; - struct whiteheat_urb_wrap *wrap; - unsigned char *data = urb->transfer_buffer; - struct whiteheat_private *info = usb_get_serial_port_data(port); - int status = urb->status; - - dbg("%s - port %d", __FUNCTION__, port->number); - - spin_lock(&info->lock); - wrap = urb_to_wrap(urb, &info->rx_urbs_submitted); - if (!wrap) { - spin_unlock(&info->lock); - err("%s - Not my urb!", __FUNCTION__); - return; - } - list_del(&wrap->list); - spin_unlock(&info->lock); - - if (status) { - dbg("%s - nonzero read bulk status received: %d", - __FUNCTION__, status); - spin_lock(&info->lock); - list_add(&wrap->list, &info->rx_urbs_free); - spin_unlock(&info->lock); - return; - } - - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); - - spin_lock(&info->lock); - list_add_tail(&wrap->list, &info->rx_urb_q); - if (info->flags & THROTTLED) { - info->flags |= ACTUALLY_THROTTLED; - spin_unlock(&info->lock); - return; - } - spin_unlock(&info->lock); - - schedule_work(&info->rx_work); -} - - -static void whiteheat_write_callback(struct urb *urb) -{ - struct usb_serial_port *port = (struct usb_serial_port *)urb->context; - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct whiteheat_urb_wrap *wrap; - int status = urb->status; - - dbg("%s - port %d", __FUNCTION__, port->number); - - spin_lock(&info->lock); - wrap = urb_to_wrap(urb, &info->tx_urbs_submitted); - if (!wrap) { - spin_unlock(&info->lock); - err("%s - Not my urb!", __FUNCTION__); - return; - } - list_move(&wrap->list, &info->tx_urbs_free); - spin_unlock(&info->lock); - - if (status) { - dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); - return; - } - - usb_serial_port_softint(port); + dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", + __func__, result); } /***************************************************************************** * Connect Tech's White Heat firmware interface *****************************************************************************/ -static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize) +static int firm_send_command(struct usb_serial_port *port, __u8 command, + __u8 *data, __u8 datasize) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; struct whiteheat_private *info; + struct device *dev = &port->dev; __u8 *transfer_buffer; int retval = 0; int t; - dbg("%s - command %d", __FUNCTION__, command); + dev_dbg(dev, "%s - command %d\n", __func__, command); command_port = port->serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); mutex_lock(&command_info->mutex); command_info->command_finished = false; - + transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer; transfer_buffer[0] = command; - memcpy (&transfer_buffer[1], data, datasize); + memcpy(&transfer_buffer[1], data, datasize); command_port->write_urb->transfer_buffer_length = datasize + 1; - command_port->write_urb->dev = port->serial->dev; - retval = usb_submit_urb (command_port->write_urb, GFP_NOIO); + retval = usb_submit_urb(command_port->write_urb, GFP_NOIO); if (retval) { - dbg("%s - submit urb failed", __FUNCTION__); + dev_dbg(dev, "%s - submit urb failed\n", __func__); goto exit; } @@ -1129,65 +588,72 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *d usb_kill_urb(command_port->write_urb); if (command_info->command_finished == false) { - dbg("%s - command timed out.", __FUNCTION__); + dev_dbg(dev, "%s - command timed out.\n", __func__); retval = -ETIMEDOUT; goto exit; } if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) { - dbg("%s - command failed.", __FUNCTION__); + dev_dbg(dev, "%s - command failed.\n", __func__); retval = -EIO; goto exit; } if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { - dbg("%s - command completed.", __FUNCTION__); + dev_dbg(dev, "%s - command completed.\n", __func__); switch (command) { - case WHITEHEAT_GET_DTR_RTS: - info = usb_get_serial_port_data(port); - memcpy(&info->mcr, command_info->result_buffer, sizeof(struct whiteheat_dr_info)); + case WHITEHEAT_GET_DTR_RTS: + info = usb_get_serial_port_data(port); + memcpy(&info->mcr, command_info->result_buffer, + sizeof(struct whiteheat_dr_info)); break; } } - exit: mutex_unlock(&command_info->mutex); return retval; } -static int firm_open(struct usb_serial_port *port) { +static int firm_open(struct usb_serial_port *port) +{ struct whiteheat_simple open_command; - open_command.port = port->number - port->serial->minor + 1; - return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command)); + open_command.port = port->port_number + 1; + return firm_send_command(port, WHITEHEAT_OPEN, + (__u8 *)&open_command, sizeof(open_command)); } -static int firm_close(struct usb_serial_port *port) { +static int firm_close(struct usb_serial_port *port) +{ struct whiteheat_simple close_command; - close_command.port = port->number - port->serial->minor + 1; - return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command)); + close_command.port = port->port_number + 1; + return firm_send_command(port, WHITEHEAT_CLOSE, + (__u8 *)&close_command, sizeof(close_command)); } -static int firm_setup_port(struct usb_serial_port *port) { +static void firm_setup_port(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct device *dev = &port->dev; struct whiteheat_port_settings port_settings; - unsigned int cflag = port->tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; - port_settings.port = port->number + 1; + port_settings.port = port->port_number + 1; /* get the byte size */ switch (cflag & CSIZE) { - case CS5: port_settings.bits = 5; break; - case CS6: port_settings.bits = 6; break; - case CS7: port_settings.bits = 7; break; - default: - case CS8: port_settings.bits = 8; break; + case CS5: port_settings.bits = 5; break; + case CS6: port_settings.bits = 6; break; + case CS7: port_settings.bits = 7; break; + default: + case CS8: port_settings.bits = 8; break; } - dbg("%s - data bits = %d", __FUNCTION__, port_settings.bits); - + dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits); + /* determine the parity */ if (cflag & PARENB) if (cflag & CMSPAR) @@ -1202,100 +668,114 @@ static int firm_setup_port(struct usb_serial_port *port) { port_settings.parity = WHITEHEAT_PAR_EVEN; else port_settings.parity = WHITEHEAT_PAR_NONE; - dbg("%s - parity = %c", __FUNCTION__, port_settings.parity); + dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity); /* figure out the stop bits requested */ if (cflag & CSTOPB) port_settings.stop = 2; else port_settings.stop = 1; - dbg("%s - stop bits = %d", __FUNCTION__, port_settings.stop); + dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop); /* figure out the flow control settings */ if (cflag & CRTSCTS) - port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS); + port_settings.hflow = (WHITEHEAT_HFLOW_CTS | + WHITEHEAT_HFLOW_RTS); else port_settings.hflow = WHITEHEAT_HFLOW_NONE; - dbg("%s - hardware flow control = %s %s %s %s", __FUNCTION__, + dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__, (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : ""); - + /* determine software flow control */ - if (I_IXOFF(port->tty)) + if (I_IXOFF(tty)) port_settings.sflow = WHITEHEAT_SFLOW_RXTX; else port_settings.sflow = WHITEHEAT_SFLOW_NONE; - dbg("%s - software flow control = %c", __FUNCTION__, port_settings.sflow); - - port_settings.xon = START_CHAR(port->tty); - port_settings.xoff = STOP_CHAR(port->tty); - dbg("%s - XON = %2x, XOFF = %2x", __FUNCTION__, port_settings.xon, port_settings.xoff); + dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow); + + port_settings.xon = START_CHAR(tty); + port_settings.xoff = STOP_CHAR(tty); + dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff); /* get the baud rate wanted */ - port_settings.baud = tty_get_baud_rate(port->tty); - dbg("%s - baud rate = %d", __FUNCTION__, port_settings.baud); + port_settings.baud = tty_get_baud_rate(tty); + dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud); /* fixme: should set validated settings */ - tty_encode_baud_rate(port->tty, port_settings.baud, port_settings.baud); + tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud); /* handle any settings that aren't specified in the tty structure */ port_settings.lloop = 0; - + /* now send the message to the device */ - return firm_send_command(port, WHITEHEAT_SETUP_PORT, (__u8 *)&port_settings, sizeof(port_settings)); + firm_send_command(port, WHITEHEAT_SETUP_PORT, + (__u8 *)&port_settings, sizeof(port_settings)); } -static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) { +static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) +{ struct whiteheat_set_rdb rts_command; - rts_command.port = port->number - port->serial->minor + 1; + rts_command.port = port->port_number + 1; rts_command.state = onoff; - return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command)); + return firm_send_command(port, WHITEHEAT_SET_RTS, + (__u8 *)&rts_command, sizeof(rts_command)); } -static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) { +static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) +{ struct whiteheat_set_rdb dtr_command; - dtr_command.port = port->number - port->serial->minor + 1; + dtr_command.port = port->port_number + 1; dtr_command.state = onoff; - return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&dtr_command, sizeof(dtr_command)); + return firm_send_command(port, WHITEHEAT_SET_DTR, + (__u8 *)&dtr_command, sizeof(dtr_command)); } -static int firm_set_break(struct usb_serial_port *port, __u8 onoff) { +static int firm_set_break(struct usb_serial_port *port, __u8 onoff) +{ struct whiteheat_set_rdb break_command; - break_command.port = port->number - port->serial->minor + 1; + break_command.port = port->port_number + 1; break_command.state = onoff; - return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&break_command, sizeof(break_command)); + return firm_send_command(port, WHITEHEAT_SET_BREAK, + (__u8 *)&break_command, sizeof(break_command)); } -static int firm_purge(struct usb_serial_port *port, __u8 rxtx) { +static int firm_purge(struct usb_serial_port *port, __u8 rxtx) +{ struct whiteheat_purge purge_command; - purge_command.port = port->number - port->serial->minor + 1; + purge_command.port = port->port_number + 1; purge_command.what = rxtx; - return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command)); + return firm_send_command(port, WHITEHEAT_PURGE, + (__u8 *)&purge_command, sizeof(purge_command)); } -static int firm_get_dtr_rts(struct usb_serial_port *port) { +static int firm_get_dtr_rts(struct usb_serial_port *port) +{ struct whiteheat_simple get_dr_command; - get_dr_command.port = port->number - port->serial->minor + 1; - return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command)); + get_dr_command.port = port->port_number + 1; + return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, + (__u8 *)&get_dr_command, sizeof(get_dr_command)); } -static int firm_report_tx_done(struct usb_serial_port *port) { +static int firm_report_tx_done(struct usb_serial_port *port) +{ struct whiteheat_simple close_command; - close_command.port = port->number - port->serial->minor + 1; - return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command)); + close_command.port = port->port_number + 1; + return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, + (__u8 *)&close_command, sizeof(close_command)); } @@ -1307,7 +787,7 @@ static int start_command_port(struct usb_serial *serial) struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; int retval = 0; - + command_port = serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); mutex_lock(&command_info->mutex); @@ -1315,10 +795,11 @@ static int start_command_port(struct usb_serial *serial) /* Work around HCD bugs */ usb_clear_halt(serial->dev, command_port->read_urb->pipe); - command_port->read_urb->dev = serial->dev; retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL); if (retval) { - err("%s - failed submitting read urb, error %d", __FUNCTION__, retval); + dev_err(&serial->dev->dev, + "%s - failed submitting read urb, error %d\n", + __func__, retval); goto exit; } } @@ -1344,175 +825,11 @@ static void stop_command_port(struct usb_serial *serial) mutex_unlock(&command_info->mutex); } +module_usb_serial_driver(serial_drivers, id_table_combined); -static int start_port_read(struct usb_serial_port *port) -{ - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - int retval = 0; - unsigned long flags; - struct list_head *tmp; - struct list_head *tmp2; - - spin_lock_irqsave(&info->lock, flags); - - list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) { - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - urb->dev = port->serial->dev; - spin_unlock_irqrestore(&info->lock, flags); - retval = usb_submit_urb(urb, GFP_KERNEL); - if (retval) { - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_free); - list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - list_del(tmp); - spin_unlock_irqrestore(&info->lock, flags); - usb_kill_urb(urb); - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_free); - } - break; - } - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_submitted); - } - - spin_unlock_irqrestore(&info->lock, flags); - - return retval; -} - - -static struct whiteheat_urb_wrap *urb_to_wrap(struct urb* urb, struct list_head *head) -{ - struct whiteheat_urb_wrap *wrap; - struct list_head *tmp; - - list_for_each(tmp, head) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - if (wrap->urb == urb) - return wrap; - } - - return NULL; -} - - -static struct list_head *list_first(struct list_head *head) -{ - return head->next; -} - - -static void rx_data_softint(struct work_struct *work) -{ - struct whiteheat_private *info = - container_of(work, struct whiteheat_private, rx_work); - struct usb_serial_port *port = info->port; - struct tty_struct *tty = port->tty; - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - unsigned long flags; - struct list_head *tmp; - struct list_head *tmp2; - int result; - int sent = 0; - - spin_lock_irqsave(&info->lock, flags); - if (info->flags & THROTTLED) { - spin_unlock_irqrestore(&info->lock, flags); - return; - } - - list_for_each_safe(tmp, tmp2, &info->rx_urb_q) { - list_del(tmp); - spin_unlock_irqrestore(&info->lock, flags); - - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - - if (tty && urb->actual_length) { - int len = tty_buffer_request_room(tty, urb->actual_length); - /* This stuff can go away now I suspect */ - if (unlikely(len < urb->actual_length)) { - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urb_q); - spin_unlock_irqrestore(&info->lock, flags); - tty_flip_buffer_push(tty); - schedule_work(&info->rx_work); - return; - } - tty_insert_flip_string(tty, urb->transfer_buffer, len); - sent += len; - } - - urb->dev = port->serial->dev; - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result) { - err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_free); - continue; - } - - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_submitted); - } - spin_unlock_irqrestore(&info->lock, flags); - - if (sent) - tty_flip_buffer_push(tty); -} - - -/***************************************************************************** - * Connect Tech's White Heat module functions - *****************************************************************************/ -static int __init whiteheat_init (void) -{ - int retval; - retval = usb_serial_register(&whiteheat_fake_device); - if (retval) - goto failed_fake_register; - retval = usb_serial_register(&whiteheat_device); - if (retval) - goto failed_device_register; - retval = usb_register(&whiteheat_driver); - if (retval) - goto failed_usb_register; - info(DRIVER_DESC " " DRIVER_VERSION); - return 0; -failed_usb_register: - usb_serial_deregister(&whiteheat_device); -failed_device_register: - usb_serial_deregister(&whiteheat_fake_device); -failed_fake_register: - return retval; -} - - -static void __exit whiteheat_exit (void) -{ - usb_deregister (&whiteheat_driver); - usb_serial_deregister (&whiteheat_fake_device); - usb_serial_deregister (&whiteheat_device); -} - - -module_init(whiteheat_init); -module_exit(whiteheat_exit); - -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -module_param(urb_pool_size, int, 0); -MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); +MODULE_FIRMWARE("whiteheat.fw"); +MODULE_FIRMWARE("whiteheat_loader.fw"); |