diff options
Diffstat (limited to 'drivers/usb/serial/whiteheat.c')
| -rw-r--r-- | drivers/usb/serial/whiteheat.c | 836 |
1 files changed, 82 insertions, 754 deletions
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 7e0acf5c8e3..e62f2dff8b7 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -18,7 +18,6 @@ #include <linux/kernel.h> #include <linux/errno.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/tty.h> #include <linux/tty_driver.h> @@ -32,12 +31,9 @@ #include <linux/serial_reg.h> #include <linux/serial.h> #include <linux/usb/serial.h> -#include <linux/firmware.h> -#include <linux/ihex.h> +#include <linux/usb/ezusb.h> #include "whiteheat.h" /* WhiteHEAT specific commands */ -static bool debug; - #ifndef CMSPAR #define CMSPAR 0 #endif @@ -45,7 +41,6 @@ static bool debug; /* * Version Information */ -#define DRIVER_VERSION "v2.0" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>" #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver" @@ -78,13 +73,6 @@ static const struct usb_device_id id_table_combined[] = { MODULE_DEVICE_TABLE(usb, id_table_combined); -static struct usb_driver whiteheat_driver = { - .name = "whiteheat", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table_combined, - .no_dynamic_id = 1, -}; /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ static int whiteheat_firmware_download(struct usb_serial *serial, @@ -94,13 +82,11 @@ static int whiteheat_firmware_attach(struct usb_serial *serial); /* function prototypes for the Connect Tech WhiteHEAT serial converter */ static int whiteheat_attach(struct usb_serial *serial); static void whiteheat_release(struct usb_serial *serial); +static int whiteheat_port_probe(struct usb_serial_port *port); +static int whiteheat_port_remove(struct usb_serial_port *port); static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port); static void whiteheat_close(struct usb_serial_port *port); -static int whiteheat_write(struct tty_struct *tty, - struct usb_serial_port *port, - const unsigned char *buf, int count); -static int whiteheat_write_room(struct tty_struct *tty); static int whiteheat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void whiteheat_set_termios(struct tty_struct *tty, @@ -109,11 +95,6 @@ static int whiteheat_tiocmget(struct tty_struct *tty); static int whiteheat_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void whiteheat_break_ctl(struct tty_struct *tty, int break_state); -static int whiteheat_chars_in_buffer(struct tty_struct *tty); -static void whiteheat_throttle(struct tty_struct *tty); -static void whiteheat_unthrottle(struct tty_struct *tty); -static void whiteheat_read_callback(struct urb *urb); -static void whiteheat_write_callback(struct urb *urb); static struct usb_serial_driver whiteheat_fake_device = { .driver = { @@ -121,7 +102,6 @@ static struct usb_serial_driver whiteheat_fake_device = { .name = "whiteheatnofirm", }, .description = "Connect Tech - WhiteHEAT - (prerenumeration)", - .usb_driver = &whiteheat_driver, .id_table = id_table_prerenumeration, .num_ports = 1, .probe = whiteheat_firmware_download, @@ -134,27 +114,26 @@ static struct usb_serial_driver whiteheat_device = { .name = "whiteheat", }, .description = "Connect Tech - WhiteHEAT", - .usb_driver = &whiteheat_driver, .id_table = id_table_std, .num_ports = 4, .attach = whiteheat_attach, .release = whiteheat_release, + .port_probe = whiteheat_port_probe, + .port_remove = whiteheat_port_remove, .open = whiteheat_open, .close = whiteheat_close, - .write = whiteheat_write, - .write_room = whiteheat_write_room, .ioctl = whiteheat_ioctl, .set_termios = whiteheat_set_termios, .break_ctl = whiteheat_break_ctl, .tiocmget = whiteheat_tiocmget, .tiocmset = whiteheat_tiocmset, - .chars_in_buffer = whiteheat_chars_in_buffer, - .throttle = whiteheat_throttle, - .unthrottle = whiteheat_unthrottle, - .read_bulk_callback = whiteheat_read_callback, - .write_bulk_callback = whiteheat_write_callback, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, }; +static struct usb_serial_driver * const serial_drivers[] = { + &whiteheat_fake_device, &whiteheat_device, NULL +}; struct whiteheat_command_private { struct mutex mutex; @@ -166,29 +145,8 @@ struct whiteheat_command_private { __u8 result_buffer[64]; }; - -#define THROTTLED 0x01 -#define ACTUALLY_THROTTLED 0x02 - -static int urb_pool_size = 8; - -struct whiteheat_urb_wrap { - struct list_head list; - struct urb *urb; -}; - struct whiteheat_private { - spinlock_t lock; - __u8 flags; __u8 mcr; /* FIXME: no locking on mcr */ - struct list_head rx_urbs_free; - struct list_head rx_urbs_submitted; - struct list_head rx_urb_q; - struct work_struct rx_work; - struct usb_serial_port *port; - struct list_head tx_urbs_free; - struct list_head tx_urbs_submitted; - struct mutex deathwarrant; }; @@ -198,12 +156,6 @@ static void stop_command_port(struct usb_serial *serial); static void command_port_write_callback(struct urb *urb); static void command_port_read_callback(struct urb *urb); -static int start_port_read(struct usb_serial_port *port); -static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, - struct list_head *head); -static struct list_head *list_first(struct list_head *head); -static void rx_data_softint(struct work_struct *work); - static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize); static int firm_open(struct usb_serial_port *port); @@ -243,86 +195,15 @@ static int firm_report_tx_done(struct usb_serial_port *port); static int whiteheat_firmware_download(struct usb_serial *serial, const struct usb_device_id *id) { - int response, ret = -ENOENT; - const struct firmware *loader_fw = NULL, *firmware_fw = NULL; - const struct ihex_binrec *record; - - dbg("%s", __func__); - - if (request_ihex_firmware(&firmware_fw, "whiteheat.fw", - &serial->dev->dev)) { - dev_err(&serial->dev->dev, - "%s - request \"whiteheat.fw\" failed\n", __func__); - goto out; - } - if (request_ihex_firmware(&loader_fw, "whiteheat_loader.fw", - &serial->dev->dev)) { - dev_err(&serial->dev->dev, - "%s - request \"whiteheat_loader.fw\" failed\n", - __func__); - goto out; - } - ret = 0; - response = ezusb_set_reset (serial, 1); - - record = (const struct ihex_binrec *)loader_fw->data; - while (record) { - response = ezusb_writememory (serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa0); - if (response < 0) { - dev_err(&serial->dev->dev, "%s - ezusb_writememory " - "failed for loader (%d %04X %p %d)\n", - __func__, response, be32_to_cpu(record->addr), - record->data, be16_to_cpu(record->len)); - break; - } - record = ihex_next_binrec(record); - } + int response; - response = ezusb_set_reset(serial, 0); - - record = (const struct ihex_binrec *)firmware_fw->data; - while (record && be32_to_cpu(record->addr) < 0x1b40) - record = ihex_next_binrec(record); - while (record) { - response = ezusb_writememory (serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa3); - if (response < 0) { - dev_err(&serial->dev->dev, "%s - ezusb_writememory " - "failed for first firmware step " - "(%d %04X %p %d)\n", __func__, response, - be32_to_cpu(record->addr), record->data, - be16_to_cpu(record->len)); - break; - } - ++record; + response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw"); + if (response >= 0) { + response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw"); + if (response >= 0) + return 0; } - - response = ezusb_set_reset(serial, 1); - - record = (const struct ihex_binrec *)firmware_fw->data; - while (record && be32_to_cpu(record->addr) < 0x1b40) { - response = ezusb_writememory (serial, be32_to_cpu(record->addr), - (unsigned char *)record->data, - be16_to_cpu(record->len), 0xa0); - if (response < 0) { - dev_err(&serial->dev->dev, "%s - ezusb_writememory " - "failed for second firmware step " - "(%d %04X %p %d)\n", __func__, response, - be32_to_cpu(record->addr), record->data, - be16_to_cpu(record->len)); - break; - } - ++record; - } - ret = 0; - response = ezusb_set_reset (serial, 0); - out: - release_firmware(loader_fw); - release_firmware(firmware_fw); - return ret; + return -ENOENT; } @@ -340,20 +221,12 @@ static int whiteheat_attach(struct usb_serial *serial) { struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; - struct usb_serial_port *port; - struct whiteheat_private *info; struct whiteheat_hw_info *hw_info; int pipe; int ret; int alen; __u8 *command; __u8 *result; - int i; - int j; - struct urb *urb; - int buf_size; - struct whiteheat_urb_wrap *wrap; - struct list_head *tmp; command_port = serial->port[COMMAND_PORT]; @@ -408,99 +281,14 @@ static int whiteheat_attach(struct usb_serial *serial) hw_info = (struct whiteheat_hw_info *)&result[1]; - dev_info(&serial->dev->dev, "%s: Driver %s: Firmware v%d.%02d\n", - serial->type->description, DRIVER_VERSION, + dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n", + serial->type->description, hw_info->sw_major_rev, hw_info->sw_minor_rev); - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - - info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); - if (info == NULL) { - dev_err(&port->dev, - "%s: Out of memory for port structures\n", - serial->type->description); - goto no_private; - } - - spin_lock_init(&info->lock); - mutex_init(&info->deathwarrant); - info->flags = 0; - info->mcr = 0; - INIT_WORK(&info->rx_work, rx_data_softint); - info->port = port; - - INIT_LIST_HEAD(&info->rx_urbs_free); - INIT_LIST_HEAD(&info->rx_urbs_submitted); - INIT_LIST_HEAD(&info->rx_urb_q); - INIT_LIST_HEAD(&info->tx_urbs_free); - INIT_LIST_HEAD(&info->tx_urbs_submitted); - - for (j = 0; j < urb_pool_size; j++) { - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - dev_err(&port->dev, "No free urbs available\n"); - goto no_rx_urb; - } - buf_size = port->read_urb->transfer_buffer_length; - urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL); - if (!urb->transfer_buffer) { - dev_err(&port->dev, - "Couldn't allocate urb buffer\n"); - goto no_rx_buf; - } - wrap = kmalloc(sizeof(*wrap), GFP_KERNEL); - if (!wrap) { - dev_err(&port->dev, - "Couldn't allocate urb wrapper\n"); - goto no_rx_wrap; - } - usb_fill_bulk_urb(urb, serial->dev, - usb_rcvbulkpipe(serial->dev, - port->bulk_in_endpointAddress), - urb->transfer_buffer, buf_size, - whiteheat_read_callback, port); - wrap->urb = urb; - list_add(&wrap->list, &info->rx_urbs_free); - - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - dev_err(&port->dev, "No free urbs available\n"); - goto no_tx_urb; - } - buf_size = port->write_urb->transfer_buffer_length; - urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL); - if (!urb->transfer_buffer) { - dev_err(&port->dev, - "Couldn't allocate urb buffer\n"); - goto no_tx_buf; - } - wrap = kmalloc(sizeof(*wrap), GFP_KERNEL); - if (!wrap) { - dev_err(&port->dev, - "Couldn't allocate urb wrapper\n"); - goto no_tx_wrap; - } - usb_fill_bulk_urb(urb, serial->dev, - usb_sndbulkpipe(serial->dev, - port->bulk_out_endpointAddress), - urb->transfer_buffer, buf_size, - whiteheat_write_callback, port); - wrap->urb = urb; - list_add(&wrap->list, &info->tx_urbs_free); - } - - usb_set_serial_port_data(port, info); - } - command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); - if (command_info == NULL) { - dev_err(&serial->dev->dev, - "%s: Out of memory for port structures\n", - serial->type->description); + if (!command_info) goto no_command_private; - } mutex_init(&command_info->mutex); command_info->port_running = 0; @@ -525,39 +313,10 @@ no_firmware: "%s: please contact support@connecttech.com\n", serial->type->description); kfree(result); + kfree(command); return -ENODEV; no_command_private: - for (i = serial->num_ports - 1; i >= 0; i--) { - port = serial->port[i]; - info = usb_get_serial_port_data(port); - for (j = urb_pool_size - 1; j >= 0; j--) { - tmp = list_first(&info->tx_urbs_free); - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - kfree(wrap); -no_tx_wrap: - kfree(urb->transfer_buffer); -no_tx_buf: - usb_free_urb(urb); -no_tx_urb: - tmp = list_first(&info->rx_urbs_free); - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - kfree(wrap); -no_rx_wrap: - kfree(urb->transfer_buffer); -no_rx_buf: - usb_free_urb(urb); -no_rx_urb: - ; - } - kfree(info); -no_private: - ; - } kfree(result); no_result_buffer: kfree(command); @@ -565,60 +324,46 @@ no_command_buffer: return -ENOMEM; } - static void whiteheat_release(struct usb_serial *serial) { struct usb_serial_port *command_port; - struct usb_serial_port *port; - struct whiteheat_private *info; - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - struct list_head *tmp; - struct list_head *tmp2; - int i; - - dbg("%s", __func__); /* free up our private data for our command port */ command_port = serial->port[COMMAND_PORT]; kfree(usb_get_serial_port_data(command_port)); +} - for (i = 0; i < serial->num_ports; i++) { - port = serial->port[i]; - info = usb_get_serial_port_data(port); - list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) { - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - kfree(wrap); - kfree(urb->transfer_buffer); - usb_free_urb(urb); - } - list_for_each_safe(tmp, tmp2, &info->tx_urbs_free) { - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - kfree(wrap); - kfree(urb->transfer_buffer); - usb_free_urb(urb); - } - kfree(info); - } +static int whiteheat_port_probe(struct usb_serial_port *port) +{ + struct whiteheat_private *info; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + usb_set_serial_port_data(port, info); + + return 0; } -static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) +static int whiteheat_port_remove(struct usb_serial_port *port) { - int retval = 0; + struct whiteheat_private *info; - dbg("%s - port %d", __func__, port->number); + info = usb_get_serial_port_data(port); + kfree(info); + + return 0; +} + +static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int retval; retval = start_command_port(port->serial); if (retval) goto exit; - if (tty) - tty->low_latency = 1; - /* send an open port command */ retval = firm_open(port); if (retval) { @@ -640,144 +385,25 @@ static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) usb_clear_halt(port->serial->dev, port->read_urb->pipe); usb_clear_halt(port->serial->dev, port->write_urb->pipe); - /* Start reading from the device */ - retval = start_port_read(port); + retval = usb_serial_generic_open(tty, port); if (retval) { - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", - __func__, retval); firm_close(port); stop_command_port(port->serial); goto exit; } - exit: - dbg("%s - exit, retval = %d", __func__, retval); return retval; } static void whiteheat_close(struct usb_serial_port *port) { - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - struct list_head *tmp; - struct list_head *tmp2; - - dbg("%s - port %d", __func__, port->number); - firm_report_tx_done(port); firm_close(port); - /* shutdown our bulk reads and writes */ - mutex_lock(&info->deathwarrant); - spin_lock_irq(&info->lock); - list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - list_del(tmp); - spin_unlock_irq(&info->lock); - usb_kill_urb(urb); - spin_lock_irq(&info->lock); - list_add(tmp, &info->rx_urbs_free); - } - list_for_each_safe(tmp, tmp2, &info->rx_urb_q) - list_move(tmp, &info->rx_urbs_free); - list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - list_del(tmp); - spin_unlock_irq(&info->lock); - usb_kill_urb(urb); - spin_lock_irq(&info->lock); - list_add(tmp, &info->tx_urbs_free); - } - spin_unlock_irq(&info->lock); - mutex_unlock(&info->deathwarrant); - stop_command_port(port->serial); -} - - -static int whiteheat_write(struct tty_struct *tty, - struct usb_serial_port *port, const unsigned char *buf, int count) -{ - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - int result; - int bytes; - int sent = 0; - unsigned long flags; - struct list_head *tmp; - - dbg("%s - port %d", __func__, port->number); + usb_serial_generic_close(port); - if (count == 0) { - dbg("%s - write request of 0 bytes", __func__); - return (0); - } - - while (count) { - spin_lock_irqsave(&info->lock, flags); - if (list_empty(&info->tx_urbs_free)) { - spin_unlock_irqrestore(&info->lock, flags); - break; - } - tmp = list_first(&info->tx_urbs_free); - list_del(tmp); - spin_unlock_irqrestore(&info->lock, flags); - - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - bytes = (count > port->bulk_out_size) ? - port->bulk_out_size : count; - memcpy(urb->transfer_buffer, buf + sent, bytes); - - usb_serial_debug_data(debug, &port->dev, - __func__, bytes, urb->transfer_buffer); - - urb->transfer_buffer_length = bytes; - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result) { - dev_err(&port->dev, - "%s - failed submitting write urb, error %d\n", - __func__, result); - sent = result; - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->tx_urbs_free); - spin_unlock_irqrestore(&info->lock, flags); - break; - } else { - sent += bytes; - count -= bytes; - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->tx_urbs_submitted); - spin_unlock_irqrestore(&info->lock, flags); - } - } - - return sent; -} - -static int whiteheat_write_room(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct list_head *tmp; - int room = 0; - unsigned long flags; - - dbg("%s - port %d", __func__, port->number); - - spin_lock_irqsave(&info->lock, flags); - list_for_each(tmp, &info->tx_urbs_free) - room++; - spin_unlock_irqrestore(&info->lock, flags); - room *= port->bulk_out_size; - - dbg("%s - returns %d", __func__, room); - return (room); + stop_command_port(port->serial); } static int whiteheat_tiocmget(struct tty_struct *tty) @@ -786,8 +412,6 @@ static int whiteheat_tiocmget(struct tty_struct *tty) struct whiteheat_private *info = usb_get_serial_port_data(port); unsigned int modem_signals = 0; - dbg("%s - port %d", __func__, port->number); - firm_get_dtr_rts(port); if (info->mcr & UART_MCR_DTR) modem_signals |= TIOCM_DTR; @@ -803,8 +427,6 @@ static int whiteheat_tiocmset(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; struct whiteheat_private *info = usb_get_serial_port_data(port); - dbg("%s - port %d", __func__, port->number); - if (set & TIOCM_RTS) info->mcr |= UART_MCR_RTS; if (set & TIOCM_DTR) @@ -828,16 +450,14 @@ static int whiteheat_ioctl(struct tty_struct *tty, struct serial_struct serstruct; void __user *user_arg = (void __user *)arg; - dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd); - switch (cmd) { case TIOCGSERIAL: memset(&serstruct, 0, sizeof(serstruct)); serstruct.type = PORT_16654; - serstruct.line = port->serial->minor; - serstruct.port = port->number; + serstruct.line = port->minor; + serstruct.port = port->port_number; serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - serstruct.xmit_fifo_size = port->bulk_out_size; + serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo); serstruct.custom_divisor = 0; serstruct.baud_base = 460800; serstruct.close_delay = CLOSING_DELAY; @@ -867,60 +487,6 @@ static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) } -static int whiteheat_chars_in_buffer(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct list_head *tmp; - struct whiteheat_urb_wrap *wrap; - int chars = 0; - unsigned long flags; - - dbg("%s - port %d", __func__, port->number); - - spin_lock_irqsave(&info->lock, flags); - list_for_each(tmp, &info->tx_urbs_submitted) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - chars += wrap->urb->transfer_buffer_length; - } - spin_unlock_irqrestore(&info->lock, flags); - - dbg("%s - returns %d", __func__, chars); - return chars; -} - - -static void whiteheat_throttle(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - struct whiteheat_private *info = usb_get_serial_port_data(port); - - dbg("%s - port %d", __func__, port->number); - - spin_lock_irq(&info->lock); - info->flags |= THROTTLED; - spin_unlock_irq(&info->lock); -} - - -static void whiteheat_unthrottle(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - struct whiteheat_private *info = usb_get_serial_port_data(port); - int actually_throttled; - - dbg("%s - port %d", __func__, port->number); - - spin_lock_irq(&info->lock); - actually_throttled = info->flags & ACTUALLY_THROTTLED; - info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED); - spin_unlock_irq(&info->lock); - - if (actually_throttled) - rx_data_softint(&info->rx_work); -} - - /***************************************************************************** * Connect Tech's White Heat callback routines *****************************************************************************/ @@ -928,10 +494,8 @@ static void command_port_write_callback(struct urb *urb) { int status = urb->status; - dbg("%s", __func__); - if (status) { - dbg("nonzero urb status: %d", status); + dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status); return; } } @@ -945,23 +509,20 @@ static void command_port_read_callback(struct urb *urb) unsigned char *data = urb->transfer_buffer; int result; - dbg("%s", __func__); - command_info = usb_get_serial_port_data(command_port); if (!command_info) { - dbg("%s - command_info is NULL, exiting.", __func__); + dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__); return; } if (status) { - dbg("%s - nonzero urb status: %d", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status); if (status != -ENOENT) command_info->command_finished = WHITEHEAT_CMD_FAILURE; wake_up(&command_info->wait_command); return; } - usb_serial_debug_data(debug, &command_port->dev, - __func__, urb->actual_length, data); + usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data); if (data[0] == WHITEHEAT_CMD_COMPLETE) { command_info->command_finished = WHITEHEAT_CMD_COMPLETE; @@ -972,97 +533,23 @@ static void command_port_read_callback(struct urb *urb) } else if (data[0] == WHITEHEAT_EVENT) { /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */ - dbg("%s - event received", __func__); + dev_dbg(&urb->dev->dev, "%s - event received\n", __func__); } else if (data[0] == WHITEHEAT_GET_DTR_RTS) { memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1); command_info->command_finished = WHITEHEAT_CMD_COMPLETE; wake_up(&command_info->wait_command); } else - dbg("%s - bad reply from firmware", __func__); + dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__); /* Continue trying to always read */ result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); if (result) - dbg("%s - failed resubmitting read urb, error %d", + dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); } -static void whiteheat_read_callback(struct urb *urb) -{ - struct usb_serial_port *port = urb->context; - struct whiteheat_urb_wrap *wrap; - unsigned char *data = urb->transfer_buffer; - struct whiteheat_private *info = usb_get_serial_port_data(port); - int status = urb->status; - - dbg("%s - port %d", __func__, port->number); - - spin_lock(&info->lock); - wrap = urb_to_wrap(urb, &info->rx_urbs_submitted); - if (!wrap) { - spin_unlock(&info->lock); - dev_err(&port->dev, "%s - Not my urb!\n", __func__); - return; - } - list_del(&wrap->list); - spin_unlock(&info->lock); - - if (status) { - dbg("%s - nonzero read bulk status received: %d", - __func__, status); - spin_lock(&info->lock); - list_add(&wrap->list, &info->rx_urbs_free); - spin_unlock(&info->lock); - return; - } - - usb_serial_debug_data(debug, &port->dev, - __func__, urb->actual_length, data); - - spin_lock(&info->lock); - list_add_tail(&wrap->list, &info->rx_urb_q); - if (info->flags & THROTTLED) { - info->flags |= ACTUALLY_THROTTLED; - spin_unlock(&info->lock); - return; - } - spin_unlock(&info->lock); - - schedule_work(&info->rx_work); -} - - -static void whiteheat_write_callback(struct urb *urb) -{ - struct usb_serial_port *port = urb->context; - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct whiteheat_urb_wrap *wrap; - int status = urb->status; - - dbg("%s - port %d", __func__, port->number); - - spin_lock(&info->lock); - wrap = urb_to_wrap(urb, &info->tx_urbs_submitted); - if (!wrap) { - spin_unlock(&info->lock); - dev_err(&port->dev, "%s - Not my urb!\n", __func__); - return; - } - list_move(&wrap->list, &info->tx_urbs_free); - spin_unlock(&info->lock); - - if (status) { - dbg("%s - nonzero write bulk status received: %d", - __func__, status); - return; - } - - usb_serial_port_softint(port); -} - - /***************************************************************************** * Connect Tech's White Heat firmware interface *****************************************************************************/ @@ -1072,11 +559,12 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, struct usb_serial_port *command_port; struct whiteheat_command_private *command_info; struct whiteheat_private *info; + struct device *dev = &port->dev; __u8 *transfer_buffer; int retval = 0; int t; - dbg("%s - command %d", __func__, command); + dev_dbg(dev, "%s - command %d\n", __func__, command); command_port = port->serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); @@ -1089,7 +577,7 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, command_port->write_urb->transfer_buffer_length = datasize + 1; retval = usb_submit_urb(command_port->write_urb, GFP_NOIO); if (retval) { - dbg("%s - submit urb failed", __func__); + dev_dbg(dev, "%s - submit urb failed\n", __func__); goto exit; } @@ -1100,19 +588,19 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command, usb_kill_urb(command_port->write_urb); if (command_info->command_finished == false) { - dbg("%s - command timed out.", __func__); + dev_dbg(dev, "%s - command timed out.\n", __func__); retval = -ETIMEDOUT; goto exit; } if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) { - dbg("%s - command failed.", __func__); + dev_dbg(dev, "%s - command failed.\n", __func__); retval = -EIO; goto exit; } if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { - dbg("%s - command completed.", __func__); + dev_dbg(dev, "%s - command completed.\n", __func__); switch (command) { case WHITEHEAT_GET_DTR_RTS: info = usb_get_serial_port_data(port); @@ -1131,7 +619,7 @@ static int firm_open(struct usb_serial_port *port) { struct whiteheat_simple open_command; - open_command.port = port->number - port->serial->minor + 1; + open_command.port = port->port_number + 1; return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command)); } @@ -1141,7 +629,7 @@ static int firm_close(struct usb_serial_port *port) { struct whiteheat_simple close_command; - close_command.port = port->number - port->serial->minor + 1; + close_command.port = port->port_number + 1; return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command)); } @@ -1150,10 +638,11 @@ static int firm_close(struct usb_serial_port *port) static void firm_setup_port(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; + struct device *dev = &port->dev; struct whiteheat_port_settings port_settings; - unsigned int cflag = tty->termios->c_cflag; + unsigned int cflag = tty->termios.c_cflag; - port_settings.port = port->number + 1; + port_settings.port = port->port_number + 1; /* get the byte size */ switch (cflag & CSIZE) { @@ -1163,7 +652,7 @@ static void firm_setup_port(struct tty_struct *tty) default: case CS8: port_settings.bits = 8; break; } - dbg("%s - data bits = %d", __func__, port_settings.bits); + dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits); /* determine the parity */ if (cflag & PARENB) @@ -1179,14 +668,14 @@ static void firm_setup_port(struct tty_struct *tty) port_settings.parity = WHITEHEAT_PAR_EVEN; else port_settings.parity = WHITEHEAT_PAR_NONE; - dbg("%s - parity = %c", __func__, port_settings.parity); + dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity); /* figure out the stop bits requested */ if (cflag & CSTOPB) port_settings.stop = 2; else port_settings.stop = 1; - dbg("%s - stop bits = %d", __func__, port_settings.stop); + dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop); /* figure out the flow control settings */ if (cflag & CRTSCTS) @@ -1194,7 +683,7 @@ static void firm_setup_port(struct tty_struct *tty) WHITEHEAT_HFLOW_RTS); else port_settings.hflow = WHITEHEAT_HFLOW_NONE; - dbg("%s - hardware flow control = %s %s %s %s", __func__, + dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__, (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", @@ -1205,16 +694,15 @@ static void firm_setup_port(struct tty_struct *tty) port_settings.sflow = WHITEHEAT_SFLOW_RXTX; else port_settings.sflow = WHITEHEAT_SFLOW_NONE; - dbg("%s - software flow control = %c", __func__, port_settings.sflow); + dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow); port_settings.xon = START_CHAR(tty); port_settings.xoff = STOP_CHAR(tty); - dbg("%s - XON = %2x, XOFF = %2x", - __func__, port_settings.xon, port_settings.xoff); + dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff); /* get the baud rate wanted */ port_settings.baud = tty_get_baud_rate(tty); - dbg("%s - baud rate = %d", __func__, port_settings.baud); + dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud); /* fixme: should set validated settings */ tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud); @@ -1231,7 +719,7 @@ static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) { struct whiteheat_set_rdb rts_command; - rts_command.port = port->number - port->serial->minor + 1; + rts_command.port = port->port_number + 1; rts_command.state = onoff; return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command)); @@ -1242,7 +730,7 @@ static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) { struct whiteheat_set_rdb dtr_command; - dtr_command.port = port->number - port->serial->minor + 1; + dtr_command.port = port->port_number + 1; dtr_command.state = onoff; return firm_send_command(port, WHITEHEAT_SET_DTR, (__u8 *)&dtr_command, sizeof(dtr_command)); @@ -1253,7 +741,7 @@ static int firm_set_break(struct usb_serial_port *port, __u8 onoff) { struct whiteheat_set_rdb break_command; - break_command.port = port->number - port->serial->minor + 1; + break_command.port = port->port_number + 1; break_command.state = onoff; return firm_send_command(port, WHITEHEAT_SET_BREAK, (__u8 *)&break_command, sizeof(break_command)); @@ -1264,7 +752,7 @@ static int firm_purge(struct usb_serial_port *port, __u8 rxtx) { struct whiteheat_purge purge_command; - purge_command.port = port->number - port->serial->minor + 1; + purge_command.port = port->port_number + 1; purge_command.what = rxtx; return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command)); @@ -1275,7 +763,7 @@ static int firm_get_dtr_rts(struct usb_serial_port *port) { struct whiteheat_simple get_dr_command; - get_dr_command.port = port->number - port->serial->minor + 1; + get_dr_command.port = port->port_number + 1; return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command)); } @@ -1285,7 +773,7 @@ static int firm_report_tx_done(struct usb_serial_port *port) { struct whiteheat_simple close_command; - close_command.port = port->number - port->serial->minor + 1; + close_command.port = port->port_number + 1; return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command)); } @@ -1337,161 +825,7 @@ static void stop_command_port(struct usb_serial *serial) mutex_unlock(&command_info->mutex); } - -static int start_port_read(struct usb_serial_port *port) -{ - struct whiteheat_private *info = usb_get_serial_port_data(port); - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - int retval = 0; - unsigned long flags; - struct list_head *tmp; - struct list_head *tmp2; - - spin_lock_irqsave(&info->lock, flags); - - list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) { - list_del(tmp); - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - spin_unlock_irqrestore(&info->lock, flags); - retval = usb_submit_urb(urb, GFP_KERNEL); - if (retval) { - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_free); - list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - list_del(tmp); - spin_unlock_irqrestore(&info->lock, flags); - usb_kill_urb(urb); - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_free); - } - break; - } - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_submitted); - } - - spin_unlock_irqrestore(&info->lock, flags); - - return retval; -} - - -static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, - struct list_head *head) -{ - struct whiteheat_urb_wrap *wrap; - struct list_head *tmp; - - list_for_each(tmp, head) { - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - if (wrap->urb == urb) - return wrap; - } - - return NULL; -} - - -static struct list_head *list_first(struct list_head *head) -{ - return head->next; -} - - -static void rx_data_softint(struct work_struct *work) -{ - struct whiteheat_private *info = - container_of(work, struct whiteheat_private, rx_work); - struct usb_serial_port *port = info->port; - struct tty_struct *tty = tty_port_tty_get(&port->port); - struct whiteheat_urb_wrap *wrap; - struct urb *urb; - unsigned long flags; - struct list_head *tmp; - struct list_head *tmp2; - int result; - int sent = 0; - - spin_lock_irqsave(&info->lock, flags); - if (info->flags & THROTTLED) { - spin_unlock_irqrestore(&info->lock, flags); - goto out; - } - - list_for_each_safe(tmp, tmp2, &info->rx_urb_q) { - list_del(tmp); - spin_unlock_irqrestore(&info->lock, flags); - - wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); - urb = wrap->urb; - - if (tty && urb->actual_length) - sent += tty_insert_flip_string(tty, - urb->transfer_buffer, urb->actual_length); - - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result) { - dev_err(&port->dev, - "%s - failed resubmitting read urb, error %d\n", - __func__, result); - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_free); - continue; - } - - spin_lock_irqsave(&info->lock, flags); - list_add(tmp, &info->rx_urbs_submitted); - } - spin_unlock_irqrestore(&info->lock, flags); - - if (sent) - tty_flip_buffer_push(tty); -out: - tty_kref_put(tty); -} - - -/***************************************************************************** - * Connect Tech's White Heat module functions - *****************************************************************************/ -static int __init whiteheat_init(void) -{ - int retval; - retval = usb_serial_register(&whiteheat_fake_device); - if (retval) - goto failed_fake_register; - retval = usb_serial_register(&whiteheat_device); - if (retval) - goto failed_device_register; - retval = usb_register(&whiteheat_driver); - if (retval) - goto failed_usb_register; - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" - DRIVER_DESC "\n"); - return 0; -failed_usb_register: - usb_serial_deregister(&whiteheat_device); -failed_device_register: - usb_serial_deregister(&whiteheat_fake_device); -failed_fake_register: - return retval; -} - - -static void __exit whiteheat_exit(void) -{ - usb_deregister(&whiteheat_driver); - usb_serial_deregister(&whiteheat_fake_device); - usb_serial_deregister(&whiteheat_device); -} - - -module_init(whiteheat_init); -module_exit(whiteheat_exit); +module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); @@ -1499,9 +833,3 @@ MODULE_LICENSE("GPL"); MODULE_FIRMWARE("whiteheat.fw"); MODULE_FIRMWARE("whiteheat_loader.fw"); - -module_param(urb_pool_size, int, 0); -MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); |