1 files changed, 42 insertions, 118 deletions

diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 00e6c9bac8a..504f5bff79c 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -15,7 +15,6 @@
 
 #include <asm/unaligned.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
@@ -62,6 +61,7 @@
 #define  MAX_BAUD_RATE              921600
 #define  DEFAULT_BAUD_RATE          9600
 
+#define QT2_READ_BUFFER_SIZE    512  /* size of read buffer */
 #define QT2_WRITE_BUFFER_SIZE   512  /* size of write buffer */
 #define QT2_WRITE_CONTROL_SIZE  5    /* control bytes used for a write */
 
@@ -112,25 +112,21 @@ struct qt2_serial_private {
 	unsigned char current_port;  /* current port for incoming data */
 
 	struct urb	*read_urb;   /* shared among all ports */
-	char		read_buffer[512];
+	char		*read_buffer;
 };
 
 struct qt2_port_private {
-	bool is_open;
 	u8   device_port;
 
 	spinlock_t urb_lock;
 	bool       urb_in_use;
 	struct urb *write_urb;
-	char       write_buffer[QT2_WRITE_BUFFER_SIZE];
+	char       *write_buffer;
 
 	spinlock_t  lock;
 	u8          shadowLSR;
 	u8          shadowMSR;
 
-	wait_queue_head_t   delta_msr_wait; /* Used for TIOCMIWAIT */
-	struct async_icount icount;
-
 	struct usb_serial_port *port;
 };
 
@@ -146,6 +142,7 @@ static void qt2_release(struct usb_serial *serial)
 	serial_priv = usb_get_serial_data(serial);
 
 	usb_free_urb(serial_priv->read_urb);
+	kfree(serial_priv->read_buffer);
 	kfree(serial_priv);
 }
 
@@ -347,7 +344,7 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
 	int status;
 	unsigned long flags;
 
-	device_port = (u16) (port->number - port->serial->minor);
+	device_port = port->port_number;
 
 	serial = port->serial;
 
@@ -375,7 +372,7 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
 				 device_port, data, 2, QT2_USB_TIMEOUT);
 
 	if (status < 0) {
-		dev_err(&port->dev, "%s - open port failed %i", __func__,
+		dev_err(&port->dev, "%s - open port failed %i\n", __func__,
 			status);
 		kfree(data);
 		return status;
@@ -392,13 +389,11 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
 	status = qt2_set_port_config(serial->dev, device_port,
 				     DEFAULT_BAUD_RATE, UART_LCR_WLEN8);
 	if (status < 0) {
-		dev_err(&port->dev,
-			"%s - initial setup failed for port %i (%i)\n",
-			__func__, port->number, device_port);
+		dev_err(&port->dev, "%s - initial setup failed (%i)\n",
+			__func__, device_port);
 		return status;
 	}
 
-	port_priv->is_open = true;
 	port_priv->device_port = (u8) device_port;
 
 	if (tty)
@@ -418,19 +413,11 @@ static void qt2_close(struct usb_serial_port *port)
 	serial = port->serial;
 	port_priv = usb_get_serial_port_data(port);
 
-	port_priv->is_open = false;
-
 	spin_lock_irqsave(&port_priv->urb_lock, flags);
 	usb_kill_urb(port_priv->write_urb);
 	port_priv->urb_in_use = false;
 	spin_unlock_irqrestore(&port_priv->urb_lock, flags);
 
-	mutex_lock(&port->serial->disc_mutex);
-	if (port->serial->disconnected) {
-		mutex_unlock(&port->serial->disc_mutex);
-		return;
-	}
-
 	/* flush the port transmit buffer */
 	i = usb_control_msg(serial->dev,
 			    usb_rcvctrlpipe(serial->dev, 0),
@@ -461,8 +448,6 @@ static void qt2_close(struct usb_serial_port *port)
 	if (i < 0)
 		dev_err(&port->dev, "%s - close port failed %i\n",
 			__func__, i);
-
-	mutex_unlock(&port->serial->disc_mutex);
 }
 
 static void qt2_disconnect(struct usb_serial *serial)
@@ -481,7 +466,7 @@ static int get_serial_info(struct usb_serial_port *port,
 		return -EFAULT;
 
 	memset(&tmp, 0, sizeof(tmp));
-	tmp.line		= port->serial->minor;
+	tmp.line		= port->minor;
 	tmp.port		= 0;
 	tmp.irq			= 0;
 	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
@@ -495,67 +480,6 @@ static int get_serial_info(struct usb_serial_port *port,
 	return 0;
 }
 
-static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
-{
-	struct qt2_port_private *priv = usb_get_serial_port_data(port);
-	struct async_icount prev, cur;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	prev = priv->icount;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	while (1) {
-		wait_event_interruptible(priv->delta_msr_wait,
-					 ((priv->icount.rng != prev.rng) ||
-					  (priv->icount.dsr != prev.dsr) ||
-					  (priv->icount.dcd != prev.dcd) ||
-					  (priv->icount.cts != prev.cts)));
-
-		if (signal_pending(current))
-			return -ERESTARTSYS;
-
-		spin_lock_irqsave(&priv->lock, flags);
-		cur = priv->icount;
-		spin_unlock_irqrestore(&priv->lock, flags);
-
-		if ((prev.rng == cur.rng) &&
-		    (prev.dsr == cur.dsr) &&
-		    (prev.dcd == cur.dcd) &&
-		    (prev.cts == cur.cts))
-			return -EIO;
-
-		if ((arg & TIOCM_RNG && (prev.rng != cur.rng)) ||
-		    (arg & TIOCM_DSR && (prev.dsr != cur.dsr)) ||
-		    (arg & TIOCM_CD && (prev.dcd != cur.dcd)) ||
-		    (arg & TIOCM_CTS && (prev.cts != cur.cts)))
-			return 0;
-	}
-	return 0;
-}
-
-static int qt2_get_icount(struct tty_struct *tty,
-			  struct serial_icounter_struct *icount)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct qt2_port_private *priv = usb_get_serial_port_data(port);
-	struct async_icount cnow = priv->icount;
-
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-	icount->rx = cnow.rx;
-	icount->tx = cnow.tx;
-	icount->frame = cnow.frame;
-	icount->overrun = cnow.overrun;
-	icount->parity = cnow.parity;
-	icount->brk = cnow.brk;
-	icount->buf_overrun = cnow.buf_overrun;
-
-	return 0;
-}
-
 static int qt2_ioctl(struct tty_struct *tty,
 		     unsigned int cmd, unsigned long arg)
 {
@@ -565,10 +489,6 @@ static int qt2_ioctl(struct tty_struct *tty,
 	case TIOCGSERIAL:
 		return get_serial_info(port,
 				       (struct serial_struct __user *)arg);
-
-	case TIOCMIWAIT:
-		return wait_modem_info(port, arg);
-
 	default:
 		break;
 	}
@@ -603,7 +523,7 @@ static void qt2_process_flush(struct usb_serial_port *port, unsigned char *ch)
 	return;
 }
 
-void qt2_process_read_urb(struct urb *urb)
+static void qt2_process_read_urb(struct urb *urb)
 {
 	struct usb_serial *serial;
 	struct qt2_serial_private *serial_priv;
@@ -755,16 +675,14 @@ static int qt2_setup_urbs(struct usb_serial *serial)
 
 	serial_priv = usb_get_serial_data(serial);
 	serial_priv->read_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!serial_priv->read_urb) {
-		dev_err(&serial->dev->dev, "No free urbs available\n");
+	if (!serial_priv->read_urb)
 		return -ENOMEM;
-	}
 
 	usb_fill_bulk_urb(serial_priv->read_urb, serial->dev,
 			  usb_rcvbulkpipe(serial->dev,
 					  port0->bulk_in_endpointAddress),
 			  serial_priv->read_buffer,
-			  sizeof(serial_priv->read_buffer),
+			  QT2_READ_BUFFER_SIZE,
 			  qt2_read_bulk_callback, serial);
 
 	status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL);
@@ -794,9 +712,13 @@ static int qt2_attach(struct usb_serial *serial)
 	}
 
 	serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
-	if (!serial_priv) {
-		dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+	if (!serial_priv)
 		return -ENOMEM;
+
+	serial_priv->read_buffer = kmalloc(QT2_READ_BUFFER_SIZE, GFP_KERNEL);
+	if (!serial_priv->read_buffer) {
+		status = -ENOMEM;
+		goto err_buf;
 	}
 
 	usb_set_serial_data(serial, serial_priv);
@@ -808,6 +730,8 @@ static int qt2_attach(struct usb_serial *serial)
 	return 0;
 
 attach_failed:
+	kfree(serial_priv->read_buffer);
+err_buf:
 	kfree(serial_priv);
 	return status;
 }
@@ -824,24 +748,31 @@ static int qt2_port_probe(struct usb_serial_port *port)
 
 	spin_lock_init(&port_priv->lock);
 	spin_lock_init(&port_priv->urb_lock);
-	init_waitqueue_head(&port_priv->delta_msr_wait);
 	port_priv->port = port;
 
+	port_priv->write_buffer = kmalloc(QT2_WRITE_BUFFER_SIZE, GFP_KERNEL);
+	if (!port_priv->write_buffer)
+		goto err_buf;
+
 	port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!port_priv->write_urb) {
-		kfree(port_priv);
-		return -ENOMEM;
-	}
+	if (!port_priv->write_urb)
+		goto err_urb;
+
 	bEndpointAddress = serial->port[0]->bulk_out_endpointAddress;
 	usb_fill_bulk_urb(port_priv->write_urb, serial->dev,
 				usb_sndbulkpipe(serial->dev, bEndpointAddress),
 				port_priv->write_buffer,
-				sizeof(port_priv->write_buffer),
+				QT2_WRITE_BUFFER_SIZE,
 				qt2_write_bulk_callback, port);
 
 	usb_set_serial_port_data(port, port_priv);
 
 	return 0;
+err_urb:
+	kfree(port_priv->write_buffer);
+err_buf:
+	kfree(port_priv);
+	return -ENOMEM;
 }
 
 static int qt2_port_remove(struct usb_serial_port *port)
@@ -850,6 +781,7 @@ static int qt2_port_remove(struct usb_serial_port *port)
 
 	port_priv = usb_get_serial_port_data(port);
 	usb_free_urb(port_priv->write_urb);
+	kfree(port_priv->write_buffer);
 	kfree(port_priv);
 
 	return 0;
@@ -905,12 +837,6 @@ static void qt2_break_ctl(struct tty_struct *tty, int break_state)
 
 	port_priv = usb_get_serial_port_data(port);
 
-	if (!port_priv->is_open) {
-		dev_err(&port->dev,
-			"%s - port is not open\n", __func__);
-		return;
-	}
-
 	val = (break_state == -1) ? 1 : 0;
 
 	status = qt2_control_msg(port->serial->dev, QT2_BREAK_CONTROL,
@@ -956,18 +882,15 @@ static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch)
 	if (newMSR & UART_MSR_ANY_DELTA) {
 		/* update input line counters */
 		if (newMSR & UART_MSR_DCTS)
-			port_priv->icount.cts++;
-
+			port->icount.cts++;
 		if (newMSR & UART_MSR_DDSR)
-			port_priv->icount.dsr++;
-
+			port->icount.dsr++;
 		if (newMSR & UART_MSR_DDCD)
-			port_priv->icount.dcd++;
-
+			port->icount.dcd++;
 		if (newMSR & UART_MSR_TERI)
-			port_priv->icount.rng++;
+			port->icount.rng++;
 
-		wake_up_interruptible(&port_priv->delta_msr_wait);
+		wake_up_interruptible(&port->port.delta_msr_wait);
 	}
 }
 
@@ -987,7 +910,7 @@ static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch)
 	port_priv->shadowLSR = newLSR;
 	spin_unlock_irqrestore(&port_priv->lock, flags);
 
-	icount = &port_priv->icount;
+	icount = &port->icount;
 
 	if (newLSR & UART_LSR_BRK_ERROR_BITS) {
 
@@ -1097,7 +1020,8 @@ static struct usb_serial_driver qt2_device = {
 	.break_ctl           = qt2_break_ctl,
 	.tiocmget            = qt2_tiocmget,
 	.tiocmset            = qt2_tiocmset,
-	.get_icount	     = qt2_get_icount,
+	.tiocmiwait          = usb_serial_generic_tiocmiwait,
+	.get_icount	     = usb_serial_generic_get_icount,
 	.ioctl               = qt2_ioctl,
 	.set_termios         = qt2_set_termios,
 };