diff options
Diffstat (limited to 'drivers/usb/serial/mos7720.c')
| -rw-r--r-- | drivers/usb/serial/mos7720.c | 595 |
1 files changed, 206 insertions, 389 deletions
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 4554ee49e63..dfd728a263d 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1,6 +1,6 @@ /* * mos7720.c - * Controls the Moschip 7720 usb to dual port serial convertor + * Controls the Moschip 7720 usb to dual port serial converter * * Copyright 2006 Moschip Semiconductor Tech. Ltd. * @@ -22,7 +22,6 @@ */ #include <linux/kernel.h> #include <linux/errno.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/tty.h> #include <linux/tty_driver.h> @@ -36,21 +35,17 @@ #include <linux/uaccess.h> #include <linux/parport.h> -/* - * Version Information - */ -#define DRIVER_VERSION "2.1" #define DRIVER_AUTHOR "Aspire Communications pvt Ltd." #define DRIVER_DESC "Moschip USB Serial Driver" /* default urb timeout */ -#define MOS_WDR_TIMEOUT (HZ * 5) +#define MOS_WDR_TIMEOUT 5000 #define MOS_MAX_PORT 0x02 #define MOS_WRITE 0x0E #define MOS_READ 0x0D -/* Interrupt Rotinue Defines */ +/* Interrupt Routines Defines */ #define SERIAL_IIR_RLS 0x06 #define SERIAL_IIR_RDA 0x04 #define SERIAL_IIR_CTI 0x0c @@ -66,25 +61,22 @@ struct moschip_port { __u8 shadowMCR; /* last MCR value received */ __u8 shadowMSR; /* last MSR value received */ char open; - struct async_icount icount; struct usb_serial_port *port; /* loop back to the owner */ struct urb *write_urb_pool[NUM_URBS]; }; -static bool debug; - static struct usb_serial_driver moschip7720_2port_driver; #define USB_VENDOR_ID_MOSCHIP 0x9710 #define MOSCHIP_DEVICE_ID_7720 0x7720 #define MOSCHIP_DEVICE_ID_7715 0x7715 -static const struct usb_device_id moschip_port_id_table[] = { +static const struct usb_device_id id_table[] = { { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) }, { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7715) }, { } /* terminating entry */ }; -MODULE_DEVICE_TABLE(usb, moschip_port_id_table); +MODULE_DEVICE_TABLE(usb, id_table); #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT @@ -97,6 +89,7 @@ struct urbtracker { struct list_head urblist_entry; struct kref ref_count; struct urb *urb; + struct usb_ctrlrequest *setup; }; enum mos7715_pp_modes { @@ -216,7 +209,7 @@ static int write_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, index, NULL, 0, MOS_WDR_TIMEOUT); if (status < 0) dev_err(&usbdev->dev, - "mos7720: usb_control_msg() failed: %d", status); + "mos7720: usb_control_msg() failed: %d\n", status); return status; } @@ -234,11 +227,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, __u8 requesttype = (__u8)0xc0; __u16 index = get_reg_index(reg); __u16 value = get_reg_value(reg, serial_portnum); - int status = usb_control_msg(usbdev, pipe, request, requesttype, value, - index, data, 1, MOS_WDR_TIMEOUT); - if (status < 0) + u8 *buf; + int status; + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + status = usb_control_msg(usbdev, pipe, request, requesttype, value, + index, buf, 1, MOS_WDR_TIMEOUT); + if (status == 1) + *data = *buf; + else if (status < 0) dev_err(&usbdev->dev, - "mos7720: usb_control_msg() failed: %d", status); + "mos7720: usb_control_msg() failed: %d\n", status); + kfree(buf); + return status; } @@ -257,7 +261,6 @@ static void destroy_mos_parport(struct kref *kref) struct mos7715_parport *mos_parport = container_of(kref, struct mos7715_parport, ref_count); - dbg("%s called", __func__); kfree(mos_parport); } @@ -266,8 +269,9 @@ static void destroy_urbtracker(struct kref *kref) struct urbtracker *urbtrack = container_of(kref, struct urbtracker, ref_count); struct mos7715_parport *mos_parport = urbtrack->mos_parport; - dbg("%s called", __func__); + usb_free_urb(urbtrack->urb); + kfree(urbtrack->setup); kfree(urbtrack); kref_put(&mos_parport->ref_count, destroy_mos_parport); } @@ -282,18 +286,19 @@ static void send_deferred_urbs(unsigned long _mos_parport) int ret_val; unsigned long flags; struct mos7715_parport *mos_parport = (void *)_mos_parport; - struct urbtracker *urbtrack; + struct urbtracker *urbtrack, *tmp; struct list_head *cursor, *next; - - dbg("%s called", __func__); + struct device *dev; /* if release function ran, game over */ if (unlikely(mos_parport->serial == NULL)) return; + dev = &mos_parport->serial->dev->dev; + /* try again to get the mutex */ if (!mutex_trylock(&mos_parport->serial->disc_mutex)) { - dbg("%s: rescheduling tasklet", __func__); + dev_dbg(dev, "%s: rescheduling tasklet\n", __func__); tasklet_schedule(&mos_parport->urb_tasklet); return; } @@ -308,20 +313,19 @@ static void send_deferred_urbs(unsigned long _mos_parport) if (list_empty(&mos_parport->deferred_urbs)) { spin_unlock_irqrestore(&mos_parport->listlock, flags); mutex_unlock(&mos_parport->serial->disc_mutex); - dbg("%s: deferred_urbs list empty", __func__); + dev_dbg(dev, "%s: deferred_urbs list empty\n", __func__); return; } /* move contents of deferred_urbs list to active_urbs list and submit */ list_for_each_safe(cursor, next, &mos_parport->deferred_urbs) list_move_tail(cursor, &mos_parport->active_urbs); - list_for_each_entry(urbtrack, &mos_parport->active_urbs, + list_for_each_entry_safe(urbtrack, tmp, &mos_parport->active_urbs, urblist_entry) { ret_val = usb_submit_urb(urbtrack->urb, GFP_ATOMIC); - dbg("%s: urb submitted", __func__); + dev_dbg(dev, "%s: urb submitted\n", __func__); if (ret_val) { - dev_err(&mos_parport->serial->dev->dev, - "usb_submit_urb() failed: %d", ret_val); + dev_err(dev, "usb_submit_urb() failed: %d\n", ret_val); list_del(&urbtrack->urblist_entry); kref_put(&urbtrack->ref_count, destroy_urbtracker); } @@ -335,9 +339,9 @@ static void async_complete(struct urb *urb) { struct urbtracker *urbtrack = urb->context; int status = urb->status; - dbg("%s called", __func__); + if (unlikely(status)) - dbg("%s - nonzero urb status received: %d", __func__, status); + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); /* remove the urbtracker from the active_urbs list */ spin_lock(&urbtrack->mos_parport->listlock); @@ -352,33 +356,35 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, struct urbtracker *urbtrack; int ret_val; unsigned long flags; - struct usb_ctrlrequest setup; struct usb_serial *serial = mos_parport->serial; struct usb_device *usbdev = serial->dev; - dbg("%s called", __func__); /* create and initialize the control urb and containing urbtracker */ urbtrack = kmalloc(sizeof(struct urbtracker), GFP_ATOMIC); - if (urbtrack == NULL) { - dev_err(&usbdev->dev, "out of memory"); + if (!urbtrack) return -ENOMEM; - } + kref_get(&mos_parport->ref_count); urbtrack->mos_parport = mos_parport; urbtrack->urb = usb_alloc_urb(0, GFP_ATOMIC); - if (urbtrack->urb == NULL) { - dev_err(&usbdev->dev, "out of urbs"); + if (!urbtrack->urb) { kfree(urbtrack); return -ENOMEM; } - setup.bRequestType = (__u8)0x40; - setup.bRequest = (__u8)0x0e; - setup.wValue = get_reg_value(reg, dummy); - setup.wIndex = get_reg_index(reg); - setup.wLength = 0; + urbtrack->setup = kmalloc(sizeof(*urbtrack->setup), GFP_ATOMIC); + if (!urbtrack->setup) { + usb_free_urb(urbtrack->urb); + kfree(urbtrack); + return -ENOMEM; + } + urbtrack->setup->bRequestType = (__u8)0x40; + urbtrack->setup->bRequest = (__u8)0x0e; + urbtrack->setup->wValue = cpu_to_le16(get_reg_value(reg, dummy)); + urbtrack->setup->wIndex = cpu_to_le16(get_reg_index(reg)); + urbtrack->setup->wLength = 0; usb_fill_control_urb(urbtrack->urb, usbdev, usb_sndctrlpipe(usbdev, 0), - (unsigned char *)&setup, + (unsigned char *)urbtrack->setup, NULL, 0, async_complete, urbtrack); kref_init(&urbtrack->ref_count); INIT_LIST_HEAD(&urbtrack->urblist_entry); @@ -393,7 +399,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, &mos_parport->deferred_urbs); spin_unlock_irqrestore(&mos_parport->listlock, flags); tasklet_schedule(&mos_parport->urb_tasklet); - dbg("tasklet scheduled"); + dev_dbg(&usbdev->dev, "tasklet scheduled\n"); return 0; } @@ -412,7 +418,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, mutex_unlock(&serial->disc_mutex); if (ret_val) { dev_err(&usbdev->dev, - "%s: submit_urb() failed: %d", __func__, ret_val); + "%s: submit_urb() failed: %d\n", __func__, ret_val); spin_lock_irqsave(&mos_parport->listlock, flags); list_del(&urbtrack->urblist_entry); spin_unlock_irqrestore(&mos_parport->listlock, flags); @@ -431,7 +437,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, * not called the release function yet because someone has a serial port open. * The shared release_lock prevents the first, and the mutex and disconnected * flag maintained by usbserial covers the second. We also use the msg_pending - * flag to ensure that all synchronous usb messgage calls have completed before + * flag to ensure that all synchronous usb message calls have completed before * our release function can return. */ static int parport_prologue(struct parport *pp) @@ -446,7 +452,7 @@ static int parport_prologue(struct parport *pp) return -1; } mos_parport->msg_pending = true; /* synch usb call pending */ - INIT_COMPLETION(mos_parport->syncmsg_compl); + reinit_completion(&mos_parport->syncmsg_compl); spin_unlock(&release_lock); mutex_lock(&mos_parport->serial->disc_mutex); @@ -462,7 +468,7 @@ static int parport_prologue(struct parport *pp) } /* - * This is the the common bottom part of all parallel port functions that send + * This is the common bottom part of all parallel port functions that send * synchronous messages to the device. */ static inline void parport_epilogue(struct parport *pp) @@ -476,7 +482,7 @@ static inline void parport_epilogue(struct parport *pp) static void parport_mos7715_write_data(struct parport *pp, unsigned char d) { struct mos7715_parport *mos_parport = pp->private_data; - dbg("%s called: %2.2x", __func__, d); + if (parport_prologue(pp) < 0) return; mos7715_change_mode(mos_parport, SPP); @@ -488,7 +494,7 @@ static unsigned char parport_mos7715_read_data(struct parport *pp) { struct mos7715_parport *mos_parport = pp->private_data; unsigned char d; - dbg("%s called", __func__); + if (parport_prologue(pp) < 0) return 0; read_mos_reg(mos_parport->serial, dummy, DPR, &d); @@ -500,7 +506,7 @@ static void parport_mos7715_write_control(struct parport *pp, unsigned char d) { struct mos7715_parport *mos_parport = pp->private_data; __u8 data; - dbg("%s called: %2.2x", __func__, d); + if (parport_prologue(pp) < 0) return; data = ((__u8)d & 0x0f) | (mos_parport->shadowDCR & 0xf0); @@ -513,7 +519,7 @@ static unsigned char parport_mos7715_read_control(struct parport *pp) { struct mos7715_parport *mos_parport = pp->private_data; __u8 dcr; - dbg("%s called", __func__); + spin_lock(&release_lock); mos_parport = pp->private_data; if (unlikely(mos_parport == NULL)) { @@ -531,7 +537,7 @@ static unsigned char parport_mos7715_frob_control(struct parport *pp, { struct mos7715_parport *mos_parport = pp->private_data; __u8 dcr; - dbg("%s called", __func__); + mask &= 0x0f; val &= 0x0f; if (parport_prologue(pp) < 0) @@ -547,7 +553,7 @@ static unsigned char parport_mos7715_read_status(struct parport *pp) { unsigned char status; struct mos7715_parport *mos_parport = pp->private_data; - dbg("%s called", __func__); + spin_lock(&release_lock); mos_parport = pp->private_data; if (unlikely(mos_parport == NULL)) { /* release called */ @@ -561,17 +567,16 @@ static unsigned char parport_mos7715_read_status(struct parport *pp) static void parport_mos7715_enable_irq(struct parport *pp) { - dbg("%s called", __func__); } + static void parport_mos7715_disable_irq(struct parport *pp) { - dbg("%s called", __func__); } static void parport_mos7715_data_forward(struct parport *pp) { struct mos7715_parport *mos_parport = pp->private_data; - dbg("%s called", __func__); + if (parport_prologue(pp) < 0) return; mos7715_change_mode(mos_parport, PS2); @@ -583,7 +588,7 @@ static void parport_mos7715_data_forward(struct parport *pp) static void parport_mos7715_data_reverse(struct parport *pp) { struct mos7715_parport *mos_parport = pp->private_data; - dbg("%s called", __func__); + if (parport_prologue(pp) < 0) return; mos7715_change_mode(mos_parport, PS2); @@ -595,7 +600,6 @@ static void parport_mos7715_data_reverse(struct parport *pp) static void parport_mos7715_init_state(struct pardevice *dev, struct parport_state *s) { - dbg("%s called", __func__); s->u.pc.ctr = DCR_INIT_VAL; s->u.pc.ecr = ECR_INIT_VAL; } @@ -605,7 +609,7 @@ static void parport_mos7715_save_state(struct parport *pp, struct parport_state *s) { struct mos7715_parport *mos_parport; - dbg("%s called", __func__); + spin_lock(&release_lock); mos_parport = pp->private_data; if (unlikely(mos_parport == NULL)) { /* release called */ @@ -622,7 +626,7 @@ static void parport_mos7715_restore_state(struct parport *pp, struct parport_state *s) { struct mos7715_parport *mos_parport; - dbg("%s called", __func__); + spin_lock(&release_lock); mos_parport = pp->private_data; if (unlikely(mos_parport == NULL)) { /* release called */ @@ -641,7 +645,7 @@ static size_t parport_mos7715_write_compat(struct parport *pp, int retval; struct mos7715_parport *mos_parport = pp->private_data; int actual_len; - dbg("%s called: %u chars", __func__, (unsigned int)len); + if (parport_prologue(pp) < 0) return 0; mos7715_change_mode(mos_parport, PPF); @@ -652,7 +656,7 @@ static size_t parport_mos7715_write_compat(struct parport *pp, parport_epilogue(pp); if (retval) { dev_err(&mos_parport->serial->dev->dev, - "mos7720: usb_bulk_msg() failed: %d", retval); + "mos7720: usb_bulk_msg() failed: %d\n", retval); return 0; } return actual_len; @@ -695,10 +699,9 @@ static int mos7715_parport_init(struct usb_serial *serial) /* allocate and initialize parallel port control struct */ mos_parport = kzalloc(sizeof(struct mos7715_parport), GFP_KERNEL); - if (mos_parport == NULL) { - dbg("mos7715_parport_init: kzalloc failed"); + if (!mos_parport) return -ENOMEM; - } + mos_parport->msg_pending = false; kref_init(&mos_parport->ref_count); spin_lock_init(&mos_parport->listlock); @@ -749,6 +752,7 @@ static void mos7720_interrupt_callback(struct urb *urb) int result; int length; int status = urb->status; + struct device *dev = &urb->dev->dev; __u8 *data; __u8 sp1; __u8 sp2; @@ -761,12 +765,10 @@ static void mos7720_interrupt_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, - status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } @@ -783,7 +785,7 @@ static void mos7720_interrupt_callback(struct urb *urb) * oneukum 2007-03-14 */ if (unlikely(length != 4)) { - dbg("Wrong data !!!"); + dev_dbg(dev, "Wrong data !!!\n"); return; } @@ -792,31 +794,29 @@ static void mos7720_interrupt_callback(struct urb *urb) if ((sp1 | sp2) & 0x01) { /* No Interrupt Pending in both the ports */ - dbg("No Interrupt !!!"); + dev_dbg(dev, "No Interrupt !!!\n"); } else { switch (sp1 & 0x0f) { case SERIAL_IIR_RLS: - dbg("Serial Port 1: Receiver status error or address " - "bit detected in 9-bit mode\n"); + dev_dbg(dev, "Serial Port 1: Receiver status error or address bit detected in 9-bit mode\n"); break; case SERIAL_IIR_CTI: - dbg("Serial Port 1: Receiver time out"); + dev_dbg(dev, "Serial Port 1: Receiver time out\n"); break; case SERIAL_IIR_MS: - /* dbg("Serial Port 1: Modem status change"); */ + /* dev_dbg(dev, "Serial Port 1: Modem status change\n"); */ break; } switch (sp2 & 0x0f) { case SERIAL_IIR_RLS: - dbg("Serial Port 2: Receiver status error or address " - "bit detected in 9-bit mode"); + dev_dbg(dev, "Serial Port 2: Receiver status error or address bit detected in 9-bit mode\n"); break; case SERIAL_IIR_CTI: - dbg("Serial Port 2: Receiver time out"); + dev_dbg(dev, "Serial Port 2: Receiver time out\n"); break; case SERIAL_IIR_MS: - /* dbg("Serial Port 2: Modem status change"); */ + /* dev_dbg(dev, "Serial Port 2: Modem status change\n"); */ break; } } @@ -824,9 +824,7 @@ static void mos7720_interrupt_callback(struct urb *urb) exit: result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, - "%s - Error %d submitting control urb\n", - __func__, result); + dev_err(dev, "%s - Error %d submitting control urb\n", __func__, result); } /* @@ -839,6 +837,7 @@ static void mos7715_interrupt_callback(struct urb *urb) int result; int length; int status = urb->status; + struct device *dev = &urb->dev->dev; __u8 *data; __u8 iir; @@ -851,12 +850,10 @@ static void mos7715_interrupt_callback(struct urb *urb) case -ESHUTDOWN: case -ENODEV: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - status); + dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, - status); + dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } @@ -870,7 +867,7 @@ static void mos7715_interrupt_callback(struct urb *urb) * Byte 4: FIFO status for both */ if (unlikely(length != 4)) { - dbg("Wrong data !!!"); + dev_dbg(dev, "Wrong data !!!\n"); return; } @@ -878,14 +875,13 @@ static void mos7715_interrupt_callback(struct urb *urb) if (!(iir & 0x01)) { /* serial port interrupt pending */ switch (iir & 0x0f) { case SERIAL_IIR_RLS: - dbg("Serial Port: Receiver status error or address " - "bit detected in 9-bit mode\n"); + dev_dbg(dev, "Serial Port: Receiver status error or address bit detected in 9-bit mode\n"); break; case SERIAL_IIR_CTI: - dbg("Serial Port: Receiver time out"); + dev_dbg(dev, "Serial Port: Receiver time out\n"); break; case SERIAL_IIR_MS: - /* dbg("Serial Port: Modem status change"); */ + /* dev_dbg(dev, "Serial Port: Modem status change\n"); */ break; } } @@ -903,9 +899,7 @@ static void mos7715_interrupt_callback(struct urb *urb) exit: result = usb_submit_urb(urb, GFP_ATOMIC); if (result) - dev_err(&urb->dev->dev, - "%s - Error %d submitting control urb\n", - __func__, result); + dev_err(dev, "%s - Error %d submitting control urb\n", __func__, result); } /* @@ -918,32 +912,28 @@ static void mos7720_bulk_in_callback(struct urb *urb) int retval; unsigned char *data ; struct usb_serial_port *port; - struct tty_struct *tty; int status = urb->status; if (status) { - dbg("nonzero read bulk status received: %d", status); + dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status); return; } port = urb->context; - dbg("Entering...%s", __func__); + dev_dbg(&port->dev, "Entering...%s\n", __func__); data = urb->transfer_buffer; - tty = tty_port_tty_get(&port->port); - if (tty && urb->actual_length) { - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); } - tty_kref_put(tty); if (port->read_urb->status != -EINPROGRESS) { retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (retval) - dbg("usb_submit_urb(read bulk) failed, retval = %d", - retval); + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval); } } @@ -955,25 +945,21 @@ static void mos7720_bulk_in_callback(struct urb *urb) static void mos7720_bulk_out_data_callback(struct urb *urb) { struct moschip_port *mos7720_port; - struct tty_struct *tty; int status = urb->status; if (status) { - dbg("nonzero write bulk status received:%d", status); + dev_dbg(&urb->dev->dev, "nonzero write bulk status received:%d\n", status); return; } mos7720_port = urb->context; if (!mos7720_port) { - dbg("NULL mos7720_port pointer"); + dev_dbg(&urb->dev->dev, "NULL mos7720_port pointer\n"); return ; } - tty = tty_port_tty_get(&mos7720_port->port->port); - - if (tty && mos7720_port->open) - tty_wakeup(tty); - tty_kref_put(tty); + if (mos7720_port->open) + tty_port_tty_wakeup(&mos7720_port->port->port); } /* @@ -1028,18 +1014,12 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) for (j = 0; j < NUM_URBS; ++j) { urb = usb_alloc_urb(0, GFP_KERNEL); mos7720_port->write_urb_pool[j] = urb; - - if (urb == NULL) { - dev_err(&port->dev, "No more urbs???\n"); + if (!urb) continue; - } urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { - dev_err(&port->dev, - "%s-out of memory for urb buffers.\n", - __func__); usb_free_urb(mos7720_port->write_urb_pool[j]); mos7720_port->write_urb_pool[j] = NULL; continue; @@ -1064,12 +1044,10 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) * * 0x08 : SP1/2 Control Reg */ - port_number = port->number - port->serial->minor; + port_number = port->port_number; read_mos_reg(serial, port_number, LSR, &data); - dbg("SS::%p LSR:%x", mos7720_port, data); - - dbg("Check:Sending Command .........."); + dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data); write_mos_reg(serial, dummy, SP1_REG, 0x02); write_mos_reg(serial, dummy, SP2_REG, 0x02); @@ -1085,7 +1063,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) write_mos_reg(serial, port_number, SP_CONTROL_REG, 0x00); read_mos_reg(serial, dummy, SP_CONTROL_REG, &data); - data = data | (port->number - port->serial->minor + 1); + data = data | (port->port_number + 1); write_mos_reg(serial, dummy, SP_CONTROL_REG, data); mos7720_port->shadowLCR = 0x83; write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); @@ -1100,9 +1078,6 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) dev_err(&port->dev, "%s - Error %d submitting read urb\n", __func__, response); - /* initialize our icount structure */ - memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount)); - /* initialize our port settings */ mos7720_port->shadowMCR = UART_MCR_OUT2; /* Must set to enable ints! */ @@ -1128,20 +1103,16 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty) int chars = 0; struct moschip_port *mos7720_port; - dbg("%s:entering ...........", __func__); - mos7720_port = usb_get_serial_port_data(port); - if (mos7720_port == NULL) { - dbg("%s:leaving ...........", __func__); + if (mos7720_port == NULL) return 0; - } for (i = 0; i < NUM_URBS; ++i) { if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status == -EINPROGRESS) chars += URB_TRANSFER_BUFFER_SIZE; } - dbg("%s - returns %d", __func__, chars); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -1151,8 +1122,6 @@ static void mos7720_close(struct usb_serial_port *port) struct moschip_port *mos7720_port; int j; - dbg("mos7720_close:entering..."); - serial = port->serial; mos7720_port = usb_get_serial_port_data(port); @@ -1172,24 +1141,13 @@ static void mos7720_close(struct usb_serial_port *port) /* While closing port, shutdown all bulk read, write * * and interrupt read if they exists, otherwise nop */ - dbg("Shutdown bulk write"); usb_kill_urb(port->write_urb); - dbg("Shutdown bulk read"); usb_kill_urb(port->read_urb); - mutex_lock(&serial->disc_mutex); - /* these commands must not be issued if the device has - * been disconnected */ - if (!serial->disconnected) { - write_mos_reg(serial, port->number - port->serial->minor, - MCR, 0x00); - write_mos_reg(serial, port->number - port->serial->minor, - IER, 0x00); - } - mutex_unlock(&serial->disc_mutex); - mos7720_port->open = 0; + write_mos_reg(serial, port->port_number, MCR, 0x00); + write_mos_reg(serial, port->port_number, IER, 0x00); - dbg("Leaving %s", __func__); + mos7720_port->open = 0; } static void mos7720_break(struct tty_struct *tty, int break_state) @@ -1199,8 +1157,6 @@ static void mos7720_break(struct tty_struct *tty, int break_state) struct usb_serial *serial; struct moschip_port *mos7720_port; - dbg("Entering %s", __func__); - serial = port->serial; mos7720_port = usb_get_serial_port_data(port); @@ -1213,8 +1169,7 @@ static void mos7720_break(struct tty_struct *tty, int break_state) data = mos7720_port->shadowLCR & ~UART_LCR_SBC; mos7720_port->shadowLCR = data; - write_mos_reg(serial, port->number - port->serial->minor, - LCR, mos7720_port->shadowLCR); + write_mos_reg(serial, port->port_number, LCR, mos7720_port->shadowLCR); } /* @@ -1231,13 +1186,9 @@ static int mos7720_write_room(struct tty_struct *tty) int room = 0; int i; - dbg("%s:entering ...........", __func__); - mos7720_port = usb_get_serial_port_data(port); - if (mos7720_port == NULL) { - dbg("%s:leaving ...........", __func__); + if (mos7720_port == NULL) return -ENODEV; - } /* FIXME: Locking */ for (i = 0; i < NUM_URBS; ++i) { @@ -1246,7 +1197,7 @@ static int mos7720_write_room(struct tty_struct *tty) room += URB_TRANSFER_BUFFER_SIZE; } - dbg("%s - returns %d", __func__, room); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -1263,15 +1214,11 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, struct urb *urb; const unsigned char *current_position = data; - dbg("%s:entering ...........", __func__); - serial = port->serial; mos7720_port = usb_get_serial_port_data(port); - if (mos7720_port == NULL) { - dbg("mos7720_port is NULL"); + if (mos7720_port == NULL) return -ENODEV; - } /* try to find a free urb in the list */ urb = NULL; @@ -1280,29 +1227,26 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) { urb = mos7720_port->write_urb_pool[i]; - dbg("URB:%d", i); + dev_dbg(&port->dev, "URB:%d\n", i); break; } } if (urb == NULL) { - dbg("%s - no more free urbs", __func__); + dev_dbg(&port->dev, "%s - no more free urbs\n", __func__); goto exit; } if (urb->transfer_buffer == NULL) { urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); - if (urb->transfer_buffer == NULL) { - dev_err(&port->dev, "%s no more kernel memory...\n", - __func__); + if (!urb->transfer_buffer) goto exit; - } } transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); memcpy(urb->transfer_buffer, current_position, transfer_size); - usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, + usb_serial_debug_data(&port->dev, __func__, transfer_size, urb->transfer_buffer); /* fill urb with data and submit */ @@ -1315,7 +1259,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, /* send it down the pipe */ status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { - dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " + dev_err_console(port, "%s - usb_submit_urb(write bulk) failed " "with status = %d\n", __func__, status); bytes_sent = status; goto exit; @@ -1332,20 +1276,16 @@ static void mos7720_throttle(struct tty_struct *tty) struct moschip_port *mos7720_port; int status; - dbg("%s- port %d", __func__, port->number); - mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return; if (!mos7720_port->open) { - dbg("port not opened"); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } - dbg("%s: Entering ..........", __func__); - /* if we are implementing XON/XOFF, send the stop character */ if (I_IXOFF(tty)) { unsigned char stop_char = STOP_CHAR(tty); @@ -1355,10 +1295,10 @@ static void mos7720_throttle(struct tty_struct *tty) } /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { mos7720_port->shadowMCR &= ~UART_MCR_RTS; - write_mos_reg(port->serial, port->number - port->serial->minor, - MCR, mos7720_port->shadowMCR); + write_mos_reg(port->serial, port->port_number, MCR, + mos7720_port->shadowMCR); if (status != 0) return; } @@ -1374,12 +1314,10 @@ static void mos7720_unthrottle(struct tty_struct *tty) return; if (!mos7720_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } - dbg("%s: Entering ..........", __func__); - /* if we are implementing XON/XOFF, send the start character */ if (I_IXOFF(tty)) { unsigned char start_char = START_CHAR(tty); @@ -1389,10 +1327,10 @@ static void mos7720_unthrottle(struct tty_struct *tty) } /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { + if (tty->termios.c_cflag & CRTSCTS) { mos7720_port->shadowMCR |= UART_MCR_RTS; - write_mos_reg(port->serial, port->number - port->serial->minor, - MCR, mos7720_port->shadowMCR); + write_mos_reg(port->serial, port->port_number, MCR, + mos7720_port->shadowMCR); if (status != 0) return; } @@ -1415,8 +1353,8 @@ static int set_higher_rates(struct moschip_port *mos7720_port, /*********************************************** * Init Sequence for higher rates ***********************************************/ - dbg("Sending Setting Commands .........."); - port_number = port->number - port->serial->minor; + dev_dbg(&port->dev, "Sending Setting Commands ..........\n"); + port_number = port->port_number; write_mos_reg(serial, port_number, IER, 0x00); write_mos_reg(serial, port_number, FCR, 0x00); @@ -1484,7 +1422,7 @@ static struct divisor_table_entry divisor_table[] = { * this function calculates the proper baud rate divisor for the specified * baud rate. *****************************************************************************/ -static int calc_baud_rate_divisor(int baudrate, int *divisor) +static int calc_baud_rate_divisor(struct usb_serial_port *port, int baudrate, int *divisor) { int i; __u16 custom; @@ -1492,7 +1430,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) __u16 round; - dbg("%s - %d", __func__, baudrate); + dev_dbg(&port->dev, "%s - %d\n", __func__, baudrate); for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { if (divisor_table[i].baudrate == baudrate) { @@ -1514,11 +1452,11 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) custom++; *divisor = custom; - dbg("Baud %d = %d", baudrate, custom); + dev_dbg(&port->dev, "Baud %d = %d\n", baudrate, custom); return 0; } - dbg("Baud calculation Failed..."); + dev_dbg(&port->dev, "Baud calculation Failed...\n"); return -EINVAL; } @@ -1542,13 +1480,11 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, port = mos7720_port->port; serial = port->serial; - dbg("%s: Entering ..........", __func__); - - number = port->number - port->serial->minor; - dbg("%s - port = %d, baud = %d", __func__, port->number, baudrate); + number = port->port_number; + dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudrate); /* Calculate the Divisor */ - status = calc_baud_rate_divisor(baudrate, &divisor); + status = calc_baud_rate_divisor(port, baudrate, &divisor); if (status) { dev_err(&port->dev, "%s - bad baud rate\n", __func__); return status; @@ -1595,23 +1531,19 @@ static void change_port_settings(struct tty_struct *tty, port = mos7720_port->port; serial = port->serial; - port_number = port->number - port->serial->minor; - - dbg("%s - port %d", __func__, port->number); + port_number = port->port_number; if (!mos7720_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } - dbg("%s: Entering ..........", __func__); - lData = UART_LCR_WLEN8; lStop = 0x00; /* 1 stop bit */ lParity = 0x00; /* No parity */ - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; /* Change the number of bits */ switch (cflag & CSIZE) { @@ -1639,14 +1571,14 @@ static void change_port_settings(struct tty_struct *tty, if (cflag & PARENB) { if (cflag & PARODD) { lParity = UART_LCR_PARITY; - dbg("%s - parity = odd", __func__); + dev_dbg(&port->dev, "%s - parity = odd\n", __func__); } else { lParity = (UART_LCR_EPAR | UART_LCR_PARITY); - dbg("%s - parity = even", __func__); + dev_dbg(&port->dev, "%s - parity = even\n", __func__); } } else { - dbg("%s - parity = none", __func__); + dev_dbg(&port->dev, "%s - parity = none\n", __func__); } if (cflag & CMSPAR) @@ -1655,10 +1587,10 @@ static void change_port_settings(struct tty_struct *tty, /* Change the Stop bit */ if (cflag & CSTOPB) { lStop = UART_LCR_STOP; - dbg("%s - stop bits = 2", __func__); + dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__); } else { lStop = 0x00; - dbg("%s - stop bits = 1", __func__); + dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__); } #define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ @@ -1690,7 +1622,7 @@ static void change_port_settings(struct tty_struct *tty, mos7720_port->shadowMCR |= (UART_MCR_XONANY); /* To set hardware flow control to the specified * * serial port, in SP1/2_CONTROL_REG */ - if (port->number) + if (port_number) write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01); else write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02); @@ -1704,7 +1636,7 @@ static void change_port_settings(struct tty_struct *tty, baud = tty_get_baud_rate(tty); if (!baud) { /* pick a default, any default... */ - dbg("Picked default baud..."); + dev_dbg(&port->dev, "Picked default baud...\n"); baud = 9600; } @@ -1715,7 +1647,7 @@ static void change_port_settings(struct tty_struct *tty, return; } - dbg("%s - baud rate = %d", __func__, baud); + dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud); status = send_cmd_write_baud_rate(mos7720_port, baud); /* FIXME: needs to write actual resulting baud back not just blindly do so */ @@ -1727,8 +1659,7 @@ static void change_port_settings(struct tty_struct *tty, if (port->read_urb->status != -EINPROGRESS) { status = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (status) - dbg("usb_submit_urb(read bulk) failed, status = %d", - status); + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status); } } @@ -1753,23 +1684,19 @@ static void mos7720_set_termios(struct tty_struct *tty, return; if (!mos7720_port->open) { - dbg("%s - port not opened", __func__); + dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; } - dbg("%s\n", "setting termios - ASPIRE"); + dev_dbg(&port->dev, "setting termios - ASPIRE\n"); - cflag = tty->termios->c_cflag; + cflag = tty->termios.c_cflag; - dbg("%s - cflag %08x iflag %08x", __func__, - tty->termios->c_cflag, - RELEVANT_IFLAG(tty->termios->c_iflag)); + dev_dbg(&port->dev, "%s - cflag %08x iflag %08x\n", __func__, + tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); - dbg("%s - old cflag %08x old iflag %08x", __func__, - old_termios->c_cflag, - RELEVANT_IFLAG(old_termios->c_iflag)); - - dbg("%s - port %d", __func__, port->number); + dev_dbg(&port->dev, "%s - old cflag %08x old iflag %08x\n", __func__, + old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); /* change the port settings to the new ones specified */ change_port_settings(tty, mos7720_port, old_termios); @@ -1777,8 +1704,7 @@ static void mos7720_set_termios(struct tty_struct *tty, if (port->read_urb->status != -EINPROGRESS) { status = usb_submit_urb(port->read_urb, GFP_ATOMIC); if (status) - dbg("usb_submit_urb(read bulk) failed, status = %d", - status); + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status); } } @@ -1798,7 +1724,7 @@ static int get_lsr_info(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; unsigned int result = 0; unsigned char data = 0; - int port_number = port->number - port->serial->minor; + int port_number = port->port_number; int count; count = mos7720_chars_in_buffer(tty); @@ -1806,7 +1732,7 @@ static int get_lsr_info(struct tty_struct *tty, read_mos_reg(port->serial, port_number, LSR, &data); if ((data & (UART_LSR_TEMT | UART_LSR_THRE)) == (UART_LSR_TEMT | UART_LSR_THRE)) { - dbg("%s -- Empty", __func__); + dev_dbg(&port->dev, "%s -- Empty\n", __func__); result = TIOCSER_TEMT; } } @@ -1823,8 +1749,6 @@ static int mos7720_tiocmget(struct tty_struct *tty) unsigned int mcr ; unsigned int msr ; - dbg("%s - port %d", __func__, port->number); - mcr = mos7720_port->shadowMCR; msr = mos7720_port->shadowMSR; @@ -1835,8 +1759,6 @@ static int mos7720_tiocmget(struct tty_struct *tty) | ((msr & UART_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */ | ((msr & UART_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */ - dbg("%s -- %x", __func__, result); - return result; } @@ -1846,8 +1768,6 @@ static int mos7720_tiocmset(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port = usb_get_serial_port_data(port); unsigned int mcr ; - dbg("%s - port %d", __func__, port->number); - dbg("he was at tiocmset"); mcr = mos7720_port->shadowMCR; @@ -1866,36 +1786,9 @@ static int mos7720_tiocmset(struct tty_struct *tty, mcr &= ~UART_MCR_LOOP; mos7720_port->shadowMCR = mcr; - write_mos_reg(port->serial, port->number - port->serial->minor, - MCR, mos7720_port->shadowMCR); - - return 0; -} - -static int mos7720_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct moschip_port *mos7720_port; - struct async_icount cnow; + write_mos_reg(port->serial, port->port_number, MCR, + mos7720_port->shadowMCR); - mos7720_port = usb_get_serial_port_data(port); - cnow = mos7720_port->icount; - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, - port->number, icount->rx, icount->tx); return 0; } @@ -1938,8 +1831,8 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd, } mos7720_port->shadowMCR = mcr; - write_mos_reg(port->serial, port->number - port->serial->minor, - MCR, mos7720_port->shadowMCR); + write_mos_reg(port->serial, port->port_number, MCR, + mos7720_port->shadowMCR); return 0; } @@ -1955,8 +1848,8 @@ static int get_serial_info(struct moschip_port *mos7720_port, memset(&tmp, 0, sizeof(tmp)); tmp.type = PORT_16550A; - tmp.line = mos7720_port->port->serial->minor; - tmp.port = mos7720_port->port->number; + tmp.line = mos7720_port->port->minor; + tmp.port = mos7720_port->port->port_number; tmp.irq = 0; tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; @@ -1974,54 +1867,28 @@ static int mos7720_ioctl(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port; - struct async_icount cnow; - struct async_icount cprev; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) return -ENODEV; - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); - switch (cmd) { case TIOCSERGETLSR: - dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); return get_lsr_info(tty, mos7720_port, (unsigned int __user *)arg); /* FIXME: These should be using the mode methods */ case TIOCMBIS: case TIOCMBIC: - dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", - __func__, port->number); + dev_dbg(&port->dev, "%s TIOCMSET/TIOCMBIC/TIOCMSET\n", __func__); return set_modem_info(mos7720_port, cmd, (unsigned int __user *)arg); case TIOCGSERIAL: - dbg("%s (%d) TIOCGSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); return get_serial_info(mos7720_port, (struct serial_struct __user *)arg); - - case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); - cprev = mos7720_port->icount; - while (1) { - if (signal_pending(current)) - return -ERESTARTSYS; - cnow = mos7720_port->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ - break; } return -ENOIOCTLCMD; @@ -2029,20 +1896,11 @@ static int mos7720_ioctl(struct tty_struct *tty, static int mos7720_startup(struct usb_serial *serial) { - struct moschip_port *mos7720_port; struct usb_device *dev; - int i; char data; u16 product; int ret_val; - dbg("%s: Entering ..........", __func__); - - if (!serial) { - dbg("Invalid Handler"); - return -ENODEV; - } - product = le16_to_cpu(serial->dev->descriptor.idProduct); dev = serial->dev; @@ -2069,32 +1927,9 @@ static int mos7720_startup(struct usb_serial *serial) serial->port[1]->interrupt_in_buffer = NULL; } - - /* set up serial port private structures */ - for (i = 0; i < serial->num_ports; ++i) { - mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); - if (mos7720_port == NULL) { - dev_err(&dev->dev, "%s - Out of memory\n", __func__); - return -ENOMEM; - } - - /* Initialize all port interrupt end point to port 0 int - * endpoint. Our device has only one interrupt endpoint - * common to all ports */ - serial->port[i]->interrupt_in_endpointAddress = - serial->port[0]->interrupt_in_endpointAddress; - - mos7720_port->port = serial->port[i]; - usb_set_serial_port_data(serial->port[i], mos7720_port); - - dbg("port number is %d", serial->port[i]->number); - dbg("serial number is %d", serial->minor); - } - - /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ); + (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); /* start the interrupt urb */ ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); @@ -2112,15 +1947,13 @@ static int mos7720_startup(struct usb_serial *serial) #endif /* LSR For Port 1 */ read_mos_reg(serial, 0, LSR, &data); - dbg("LSR:%x", data); + dev_dbg(&dev->dev, "LSR:%x\n", data); return 0; } static void mos7720_release(struct usb_serial *serial) { - int i; - #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT /* close the parallel port */ @@ -2139,7 +1972,7 @@ static void mos7720_release(struct usb_serial *serial) /* wait for synchronous usb calls to return */ if (mos_parport->msg_pending) wait_for_completion_timeout(&mos_parport->syncmsg_compl, - MOS_WDR_TIMEOUT); + msecs_to_jiffies(MOS_WDR_TIMEOUT)); parport_remove_port(mos_parport->pp); usb_set_serial_data(serial, NULL); @@ -2159,18 +1992,37 @@ static void mos7720_release(struct usb_serial *serial) kref_put(&mos_parport->ref_count, destroy_mos_parport); } #endif - /* free private structure allocated for serial port */ - for (i = 0; i < serial->num_ports; ++i) - kfree(usb_get_serial_port_data(serial->port[i])); } -static struct usb_driver usb_driver = { - .name = "moschip7720", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = moschip_port_id_table, - .no_dynamic_id = 1, -}; +static int mos7720_port_probe(struct usb_serial_port *port) +{ + struct moschip_port *mos7720_port; + + mos7720_port = kzalloc(sizeof(*mos7720_port), GFP_KERNEL); + if (!mos7720_port) + return -ENOMEM; + + /* Initialize all port interrupt end point to port 0 int endpoint. + * Our device has only one interrupt endpoint common to all ports. + */ + port->interrupt_in_endpointAddress = + port->serial->port[0]->interrupt_in_endpointAddress; + mos7720_port->port = port; + + usb_set_serial_port_data(port, mos7720_port); + + return 0; +} + +static int mos7720_port_remove(struct usb_serial_port *port) +{ + struct moschip_port *mos7720_port; + + mos7720_port = usb_get_serial_port_data(port); + kfree(mos7720_port); + + return 0; +} static struct usb_serial_driver moschip7720_2port_driver = { .driver = { @@ -2178,8 +2030,7 @@ static struct usb_serial_driver moschip7720_2port_driver = { .name = "moschip7720", }, .description = "Moschip 2 port adapter", - .usb_driver = &usb_driver, - .id_table = moschip_port_id_table, + .id_table = id_table, .calc_num_ports = mos77xx_calc_num_ports, .open = mos7720_open, .close = mos7720_close, @@ -2188,10 +2039,11 @@ static struct usb_serial_driver moschip7720_2port_driver = { .probe = mos77xx_probe, .attach = mos7720_startup, .release = mos7720_release, + .port_probe = mos7720_port_probe, + .port_remove = mos7720_port_remove, .ioctl = mos7720_ioctl, .tiocmget = mos7720_tiocmget, .tiocmset = mos7720_tiocmset, - .get_icount = mos7720_get_icount, .set_termios = mos7720_set_termios, .write = mos7720_write, .write_room = mos7720_write_room, @@ -2201,47 +2053,12 @@ static struct usb_serial_driver moschip7720_2port_driver = { .read_int_callback = NULL /* dynamically assigned in probe() */ }; -static int __init moschip7720_init(void) -{ - int retval; - - dbg("%s: Entering ..........", __func__); - - /* Register with the usb serial */ - retval = usb_serial_register(&moschip7720_2port_driver); - if (retval) - goto failed_port_device_register; - - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" - DRIVER_DESC "\n"); - - /* Register with the usb */ - retval = usb_register(&usb_driver); - if (retval) - goto failed_usb_register; - - return 0; - -failed_usb_register: - usb_serial_deregister(&moschip7720_2port_driver); - -failed_port_device_register: - return retval; -} - -static void __exit moschip7720_exit(void) -{ - usb_deregister(&usb_driver); - usb_serial_deregister(&moschip7720_2port_driver); -} +static struct usb_serial_driver * const serial_drivers[] = { + &moschip7720_2port_driver, NULL +}; -module_init(moschip7720_init); -module_exit(moschip7720_exit); +module_usb_serial_driver(serial_drivers, id_table); -/* Module information */ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); |