diff options
Diffstat (limited to 'drivers/usb/serial/keyspan.h')
| -rw-r--r-- | drivers/usb/serial/keyspan.h | 214 |
1 files changed, 56 insertions, 158 deletions
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 74ce8bca3e6..0273dda303a 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -9,7 +9,7 @@ the Free Software Foundation; either version 2 of the License, or (at your option) any later version. - See http://misc.nu/hugh/keyspan.html for more information. + See http://blemings.org/hugh/keyspan.html for more information. Code in this driver inspired by and in a number of places taken from Brian Warner's original Keyspan-PDA driver. @@ -35,17 +35,19 @@ /* Function prototypes for Keyspan serial converter */ -static int keyspan_open (struct usb_serial_port *port, - struct file *filp); -static void keyspan_close (struct usb_serial_port *port, - struct file *filp); +static int keyspan_open (struct tty_struct *tty, + struct usb_serial_port *port); +static void keyspan_close (struct usb_serial_port *port); +static void keyspan_dtr_rts (struct usb_serial_port *port, int on); static int keyspan_startup (struct usb_serial *serial); -static void keyspan_shutdown (struct usb_serial *serial); -static void keyspan_rx_throttle (struct usb_serial_port *port); -static void keyspan_rx_unthrottle (struct usb_serial_port *port); -static int keyspan_write_room (struct usb_serial_port *port); +static void keyspan_disconnect (struct usb_serial *serial); +static void keyspan_release (struct usb_serial *serial); +static int keyspan_port_probe(struct usb_serial_port *port); +static int keyspan_port_remove(struct usb_serial_port *port); +static int keyspan_write_room (struct tty_struct *tty); -static int keyspan_write (struct usb_serial_port *port, +static int keyspan_write (struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count); @@ -53,35 +55,34 @@ static void keyspan_send_setup (struct usb_serial_port *port, int reset_port); -static int keyspan_chars_in_buffer (struct usb_serial_port *port); -static int keyspan_ioctl (struct usb_serial_port *port, - struct file *file, - unsigned int cmd, - unsigned long arg); -static void keyspan_set_termios (struct usb_serial_port *port, +static void keyspan_set_termios (struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); -static void keyspan_break_ctl (struct usb_serial_port *port, +static void keyspan_break_ctl (struct tty_struct *tty, int break_state); -static int keyspan_tiocmget (struct usb_serial_port *port, - struct file *file); -static int keyspan_tiocmset (struct usb_serial_port *port, - struct file *file, unsigned int set, +static int keyspan_tiocmget (struct tty_struct *tty); +static int keyspan_tiocmset (struct tty_struct *tty, + unsigned int set, unsigned int clear); static int keyspan_fake_startup (struct usb_serial *serial); -static int keyspan_usa19_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa19_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); -static int keyspan_usa19w_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa19w_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); -static int keyspan_usa28_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa28_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); -static int keyspan_usa19hs_calc_baud (u32 baud_rate, u32 baudclk, +static int keyspan_usa19hs_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); @@ -103,90 +104,6 @@ static int keyspan_usa67_send_setup (struct usb_serial *serial, struct usb_serial_port *port, int reset_port); -/* Struct used for firmware - increased size of data section - to allow Keyspan's 'C' firmware struct to be used unmodified */ -struct ezusb_hex_record { - __u16 address; - __u8 data_size; - __u8 data[64]; -}; - -/* Conditionally include firmware images, if they aren't - included create a null pointer instead. Current - firmware images aren't optimised to remove duplicate - addresses in the image itself. */ -#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28 - #include "keyspan_usa28_fw.h" -#else - static const struct ezusb_hex_record *keyspan_usa28_firmware = NULL; -#endif - -#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28X - #include "keyspan_usa28x_fw.h" -#else - static const struct ezusb_hex_record *keyspan_usa28x_firmware = NULL; -#endif - -#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28XA - #include "keyspan_usa28xa_fw.h" -#else - static const struct ezusb_hex_record *keyspan_usa28xa_firmware = NULL; -#endif - -#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28XB - #include "keyspan_usa28xb_fw.h" -#else - static const struct ezusb_hex_record *keyspan_usa28xb_firmware = NULL; -#endif - -#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19 - #include "keyspan_usa19_fw.h" -#else - static const struct ezusb_hex_record *keyspan_usa19_firmware = NULL; -#endif - -#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19QI - #include "keyspan_usa19qi_fw.h" -#else - static const struct ezusb_hex_record *keyspan_usa19qi_firmware = NULL; -#endif - -#ifdef CONFIG_USB_SERIAL_KEYSPAN_MPR - #include "keyspan_mpr_fw.h" -#else - static const struct ezusb_hex_record *keyspan_mpr_firmware = NULL; -#endif - -#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19QW - #include "keyspan_usa19qw_fw.h" -#else - static const struct ezusb_hex_record *keyspan_usa19qw_firmware = NULL; -#endif - -#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA18X - #include "keyspan_usa18x_fw.h" -#else - static const struct ezusb_hex_record *keyspan_usa18x_firmware = NULL; -#endif - -#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19W - #include "keyspan_usa19w_fw.h" -#else - static const struct ezusb_hex_record *keyspan_usa19w_firmware = NULL; -#endif - -#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA49W - #include "keyspan_usa49w_fw.h" -#else - static const struct ezusb_hex_record *keyspan_usa49w_firmware = NULL; -#endif - -#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA49WLC - #include "keyspan_usa49wlc_fw.h" -#else - static const struct ezusb_hex_record *keyspan_usa49wlc_firmware = NULL; -#endif - /* Values used for baud rate calculation - device specific */ #define KEYSPAN_INVALID_BAUD_RATE (-1) #define KEYSPAN_BAUD_RATE_OK (0) @@ -222,7 +139,8 @@ struct ezusb_hex_record { /* Product IDs post-renumeration. Note that the 28x and 28xb have the same id's post-renumeration but behave identically - so it's not an issue. */ + so it's not an issue. As such, the 28xb is not listed in any + of the device tables. */ #define keyspan_usa18x_product_id 0x0112 #define keyspan_usa19_product_id 0x0107 #define keyspan_usa19qi_product_id 0x010c @@ -276,8 +194,9 @@ struct keyspan_device_details { /* Endpoint used for global control functions */ int glocont_endpoint; - int (*calculate_baud_rate) (u32 baud_rate, u32 baudclk, - u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); + int (*calculate_baud_rate) (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, + u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); u32 baudclk; }; @@ -543,7 +462,7 @@ static const struct keyspan_device_details *keyspan_devices[] = { NULL, }; -static struct usb_device_id keyspan_ids_combined[] = { +static const struct usb_device_id keyspan_ids_combined[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, @@ -566,7 +485,6 @@ static struct usb_device_id keyspan_ids_combined[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)}, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, @@ -576,16 +494,8 @@ static struct usb_device_id keyspan_ids_combined[] = { MODULE_DEVICE_TABLE(usb, keyspan_ids_combined); -static struct usb_driver keyspan_driver = { - .name = "keyspan", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = keyspan_ids_combined, - .no_dynamic_id = 1, -}; - /* usb_device_id table for the pre-firmware download keyspan devices */ -static struct usb_device_id keyspan_pre_ids[] = { +static const struct usb_device_id keyspan_pre_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, @@ -601,7 +511,7 @@ static struct usb_device_id keyspan_pre_ids[] = { { } /* Terminating entry */ }; -static struct usb_device_id keyspan_1port_ids[] = { +static const struct usb_device_id keyspan_1port_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, @@ -612,16 +522,15 @@ static struct usb_device_id keyspan_1port_ids[] = { { } /* Terminating entry */ }; -static struct usb_device_id keyspan_2port_ids[] = { +static const struct usb_device_id keyspan_2port_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, { } /* Terminating entry */ }; -static struct usb_device_id keyspan_4port_ids[] = { +static const struct usb_device_id keyspan_4port_ids[] = { { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) }, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, @@ -636,10 +545,6 @@ static struct usb_serial_driver keyspan_pre_device = { }, .description = "Keyspan - (without firmware)", .id_table = keyspan_pre_ids, - .num_interrupt_in = NUM_DONT_CARE, - .num_interrupt_out = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, .num_ports = 1, .attach = keyspan_fake_startup, }; @@ -651,25 +556,21 @@ static struct usb_serial_driver keyspan_1port_device = { }, .description = "Keyspan 1 port adapter", .id_table = keyspan_1port_ids, - .num_interrupt_in = NUM_DONT_CARE, - .num_interrupt_out = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, .num_ports = 1, .open = keyspan_open, .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, .write = keyspan_write, .write_room = keyspan_write_room, - .chars_in_buffer = keyspan_chars_in_buffer, - .throttle = keyspan_rx_throttle, - .unthrottle = keyspan_rx_unthrottle, - .ioctl = keyspan_ioctl, .set_termios = keyspan_set_termios, .break_ctl = keyspan_break_ctl, .tiocmget = keyspan_tiocmget, .tiocmset = keyspan_tiocmset, .attach = keyspan_startup, - .shutdown = keyspan_shutdown, + .disconnect = keyspan_disconnect, + .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, }; static struct usb_serial_driver keyspan_2port_device = { @@ -679,25 +580,21 @@ static struct usb_serial_driver keyspan_2port_device = { }, .description = "Keyspan 2 port adapter", .id_table = keyspan_2port_ids, - .num_interrupt_in = NUM_DONT_CARE, - .num_interrupt_out = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, .num_ports = 2, .open = keyspan_open, .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, .write = keyspan_write, .write_room = keyspan_write_room, - .chars_in_buffer = keyspan_chars_in_buffer, - .throttle = keyspan_rx_throttle, - .unthrottle = keyspan_rx_unthrottle, - .ioctl = keyspan_ioctl, .set_termios = keyspan_set_termios, .break_ctl = keyspan_break_ctl, .tiocmget = keyspan_tiocmget, .tiocmset = keyspan_tiocmset, .attach = keyspan_startup, - .shutdown = keyspan_shutdown, + .disconnect = keyspan_disconnect, + .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, }; static struct usb_serial_driver keyspan_4port_device = { @@ -707,25 +604,26 @@ static struct usb_serial_driver keyspan_4port_device = { }, .description = "Keyspan 4 port adapter", .id_table = keyspan_4port_ids, - .num_interrupt_in = NUM_DONT_CARE, - .num_interrupt_out = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, .num_ports = 4, .open = keyspan_open, .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, .write = keyspan_write, .write_room = keyspan_write_room, - .chars_in_buffer = keyspan_chars_in_buffer, - .throttle = keyspan_rx_throttle, - .unthrottle = keyspan_rx_unthrottle, - .ioctl = keyspan_ioctl, .set_termios = keyspan_set_termios, .break_ctl = keyspan_break_ctl, .tiocmget = keyspan_tiocmget, .tiocmset = keyspan_tiocmset, .attach = keyspan_startup, - .shutdown = keyspan_shutdown, + .disconnect = keyspan_disconnect, + .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &keyspan_pre_device, &keyspan_1port_device, + &keyspan_2port_device, &keyspan_4port_device, NULL }; #endif |