aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial/ftdi_sio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/ftdi_sio.c')
-rw-r--r--drivers/usb/serial/ftdi_sio.c220
1 files changed, 111 insertions, 109 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 216f187582a..6af0dfa5f5a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -33,12 +33,12 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/serial.h>
@@ -50,7 +50,7 @@
* Version Information
*/
#define DRIVER_VERSION "v1.5.0"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
static int debug;
@@ -88,10 +88,10 @@ struct ftdi_private {
unsigned int latency; /* latency setting in use */
spinlock_t tx_lock; /* spinlock for transmit state */
- unsigned long tx_bytes;
unsigned long tx_outstanding_bytes;
unsigned long tx_outstanding_urbs;
unsigned short max_packet_size;
+ struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() */
};
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
@@ -145,10 +145,15 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
+/*
+ * Device ID not listed? Test via module params product/vendor or
+ * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
+ */
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -552,9 +557,16 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
/*
- * Due to many user requests for multiple ELV devices we enable
- * them by default.
+ * ELV devices:
*/
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
@@ -571,11 +583,17 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -596,6 +614,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
+ { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
@@ -697,6 +716,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
@@ -718,6 +738,10 @@ static struct usb_device_id id_table_combined [] = {
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
+ { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -793,7 +817,7 @@ static struct usb_serial_driver ftdi_sio_device = {
.name = "ftdi_sio",
},
.description = "FTDI USB Serial Device",
- .usb_driver = &ftdi_driver ,
+ .usb_driver = &ftdi_driver,
.id_table = id_table_combined,
.num_ports = 1,
.probe = ftdi_sio_probe,
@@ -809,8 +833,8 @@ static struct usb_serial_driver ftdi_sio_device = {
.chars_in_buffer = ftdi_chars_in_buffer,
.read_bulk_callback = ftdi_read_bulk_callback,
.write_bulk_callback = ftdi_write_bulk_callback,
- .tiocmget = ftdi_tiocmget,
- .tiocmset = ftdi_tiocmset,
+ .tiocmget = ftdi_tiocmget,
+ .tiocmset = ftdi_tiocmset,
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
@@ -916,7 +940,6 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
unsigned int clear)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- char *buf;
unsigned urb_value;
int rv;
@@ -925,10 +948,6 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
return 0; /* no change */
}
- buf = kmalloc(1, GFP_NOIO);
- if (!buf)
- return -ENOMEM;
-
clear &= ~set; /* 'set' takes precedence over 'clear' */
urb_value = 0;
if (clear & TIOCM_DTR)
@@ -944,9 +963,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
FTDI_SIO_SET_MODEM_CTRL_REQUEST,
FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
urb_value, priv->interface,
- buf, 0, WDR_TIMEOUT);
-
- kfree(buf);
+ NULL, 0, WDR_TIMEOUT);
if (rv < 0) {
dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
__func__,
@@ -1105,16 +1122,11 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- char *buf;
__u16 urb_value;
__u16 urb_index;
__u32 urb_index_value;
int rv;
- buf = kmalloc(1, GFP_NOIO);
- if (!buf)
- return -ENOMEM;
-
urb_index_value = get_ftdi_divisor(tty, port);
urb_value = (__u16)urb_index_value;
urb_index = (__u16)(urb_index_value >> 16);
@@ -1127,9 +1139,7 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
FTDI_SIO_SET_BAUDRATE_REQUEST,
FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
urb_value, urb_index,
- buf, 0, WDR_SHORT_TIMEOUT);
-
- kfree(buf);
+ NULL, 0, WDR_SHORT_TIMEOUT);
return rv;
}
@@ -1137,8 +1147,7 @@ static int write_latency_timer(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
- char buf[1];
- int rv = 0;
+ int rv;
int l = priv->latency;
if (priv->flags & ASYNC_LOW_LATENCY)
@@ -1151,8 +1160,7 @@ static int write_latency_timer(struct usb_serial_port *port)
FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
l, priv->interface,
- buf, 0, WDR_TIMEOUT);
-
+ NULL, 0, WDR_TIMEOUT);
if (rv < 0)
dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
return rv;
@@ -1162,24 +1170,29 @@ static int read_latency_timer(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
- unsigned short latency = 0;
- int rv = 0;
-
+ unsigned char *buf;
+ int rv;
dbg("%s", __func__);
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
rv = usb_control_msg(udev,
usb_rcvctrlpipe(udev, 0),
FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
0, priv->interface,
- (char *) &latency, 1, WDR_TIMEOUT);
-
- if (rv < 0) {
+ buf, 1, WDR_TIMEOUT);
+ if (rv < 0)
dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
- return -EIO;
- }
- return latency;
+ else
+ priv->latency = buf[0];
+
+ kfree(buf);
+
+ return rv;
}
static int get_serial_info(struct usb_serial_port *port,
@@ -1210,7 +1223,7 @@ static int set_serial_info(struct tty_struct *tty,
if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
return -EFAULT;
- lock_kernel();
+ mutex_lock(&priv->cfg_lock);
old_priv = *priv;
/* Do error checking and permission checking */
@@ -1218,7 +1231,7 @@ static int set_serial_info(struct tty_struct *tty,
if (!capable(CAP_SYS_ADMIN)) {
if (((new_serial.flags & ~ASYNC_USR_MASK) !=
(priv->flags & ~ASYNC_USR_MASK))) {
- unlock_kernel();
+ mutex_unlock(&priv->cfg_lock);
return -EPERM;
}
priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
@@ -1229,7 +1242,7 @@ static int set_serial_info(struct tty_struct *tty,
if ((new_serial.baud_base != priv->baud_base) &&
(new_serial.baud_base < 9600)) {
- unlock_kernel();
+ mutex_unlock(&priv->cfg_lock);
return -EINVAL;
}
@@ -1259,11 +1272,11 @@ check_and_exit:
(priv->flags & ASYNC_SPD_MASK)) ||
(((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
(old_priv.custom_divisor != priv->custom_divisor))) {
- unlock_kernel();
+ mutex_unlock(&priv->cfg_lock);
change_speed(tty, port);
}
else
- unlock_kernel();
+ mutex_unlock(&priv->cfg_lock);
return 0;
} /* set_serial_info */
@@ -1319,20 +1332,20 @@ static void ftdi_determine_type(struct usb_serial_port *port)
__func__);
}
} else if (version < 0x200) {
- /* Old device. Assume its the original SIO. */
+ /* Old device. Assume it's the original SIO. */
priv->chip_type = SIO;
priv->baud_base = 12000000 / 16;
priv->write_offset = 1;
} else if (version < 0x400) {
- /* Assume its an FT8U232AM (or FT8U245AM) */
+ /* Assume it's an FT8U232AM (or FT8U245AM) */
/* (It might be a BM because of the iSerialNumber bug,
* but it will still work as an AM device.) */
priv->chip_type = FT8U232AM;
} else if (version < 0x600) {
- /* Assume its an FT232BM (or FT245BM) */
+ /* Assume it's an FT232BM (or FT245BM) */
priv->chip_type = FT232BM;
} else {
- /* Assume its an FT232R */
+ /* Assume it's an FT232R */
priv->chip_type = FT232RL;
}
dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
@@ -1352,7 +1365,7 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)
struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
unsigned num_endpoints;
- int i = 0;
+ int i;
num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
@@ -1404,7 +1417,7 @@ static ssize_t store_latency_timer(struct device *dev,
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
int v = simple_strtoul(valbuf, NULL, 10);
- int rv = 0;
+ int rv;
priv->latency = v;
rv = write_latency_timer(port);
@@ -1421,9 +1434,8 @@ static ssize_t store_event_char(struct device *dev,
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct usb_device *udev = port->serial->dev;
- char buf[1];
int v = simple_strtoul(valbuf, NULL, 10);
- int rv = 0;
+ int rv;
dbg("%s: setting event char = %i", __func__, v);
@@ -1432,8 +1444,7 @@ static ssize_t store_event_char(struct device *dev,
FTDI_SIO_SET_EVENT_CHAR_REQUEST,
FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
v, priv->interface,
- buf, 0, WDR_TIMEOUT);
-
+ NULL, 0, WDR_TIMEOUT);
if (rv < 0) {
dbg("Unable to write event character: %i", rv);
return -EIO;
@@ -1532,9 +1543,9 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
kref_init(&priv->kref);
spin_lock_init(&priv->tx_lock);
+ mutex_init(&priv->cfg_lock);
init_waitqueue_head(&priv->delta_msr_wait);
- /* This will push the characters through immediately rather
- than queue a task to deliver them */
+
priv->flags = ASYNC_LOW_LATENCY;
if (quirk && quirk->port_probe)
@@ -1566,7 +1577,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
ftdi_determine_type(port);
ftdi_set_max_packet_size(port);
- read_latency_timer(port);
+ if (read_latency_timer(port) < 0)
+ priv->latency = 16;
create_sysfs_attrs(port);
return 0;
}
@@ -1611,8 +1623,6 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial)
{
struct usb_device *udev = serial->dev;
int latency = ndi_latency_timer;
- int rv = 0;
- char buf[1];
if (latency == 0)
latency = 1;
@@ -1622,10 +1632,11 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial)
dbg("%s setting NDI device latency to %d", __func__, latency);
dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
- rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ /* FIXME: errors are not returned */
+ usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
- latency, 0, buf, 0, WDR_TIMEOUT);
+ latency, 0, NULL, 0, WDR_TIMEOUT);
return 0;
}
@@ -1701,7 +1712,7 @@ static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
urb->transfer_buffer_length,
ftdi_read_bulk_callback, port);
result = usb_submit_urb(urb, mem_flags);
- if (result)
+ if (result && result != -EPERM)
dev_err(&port->dev,
"%s - failed submitting read urb, error %d\n",
__func__, result);
@@ -1713,16 +1724,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
struct usb_device *dev = port->serial->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
-
- int result = 0;
- char buf[1]; /* Needed for the usb_control_msg I think */
+ int result;
dbg("%s", __func__);
- spin_lock_irqsave(&priv->tx_lock, flags);
- priv->tx_bytes = 0;
- spin_unlock_irqrestore(&priv->tx_lock, flags);
-
write_latency_timer(port);
/* No error checking for this (will get errors later anyway) */
@@ -1730,7 +1735,7 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE,
FTDI_SIO_RESET_SIO,
- priv->interface, buf, 0, WDR_TIMEOUT);
+ priv->interface, NULL, 0, WDR_TIMEOUT);
/* Termios defaults are set by usb_serial_init. We don't change
port->tty->termios - this would lose speed settings, etc.
@@ -1758,7 +1763,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- char buf[1];
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected) {
@@ -1767,7 +1771,7 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
- 0, priv->interface, buf, 0,
+ 0, priv->interface, NULL, 0,
WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "error from flowcontrol urb\n");
}
@@ -1828,7 +1832,7 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
spin_lock_irqsave(&priv->tx_lock, flags);
if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
spin_unlock_irqrestore(&priv->tx_lock, flags);
- dbg("%s - write limit hit\n", __func__);
+ dbg("%s - write limit hit", __func__);
return 0;
}
priv->tx_outstanding_urbs++;
@@ -1908,7 +1912,6 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
} else {
spin_lock_irqsave(&priv->tx_lock, flags);
priv->tx_outstanding_bytes += count;
- priv->tx_bytes += count;
spin_unlock_irqrestore(&priv->tx_lock, flags);
}
@@ -2135,8 +2138,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- __u16 urb_value = 0;
- char buf[1];
+ __u16 urb_value;
/* break_state = -1 to turn on break, and 0 to turn off break */
/* see drivers/char/tty_io.c to see it used */
@@ -2152,7 +2154,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
FTDI_SIO_SET_DATA_REQUEST,
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
- buf, 0, WDR_TIMEOUT) < 0) {
+ NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "%s FAILED to enable/disable break state "
"(state was %d)\n", __func__, break_state);
}
@@ -2176,7 +2178,6 @@ static void ftdi_set_termios(struct tty_struct *tty,
struct ktermios *termios = tty->termios;
unsigned int cflag = termios->c_cflag;
__u16 urb_value; /* will hold the new flags */
- char buf[1]; /* Perhaps I should dynamically alloc this? */
/* Added for xon/xoff support */
unsigned int iflag = termios->c_iflag;
@@ -2227,12 +2228,10 @@ static void ftdi_set_termios(struct tty_struct *tty,
}
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
- case CS5: urb_value |= 5; dbg("Setting CS5"); break;
- case CS6: urb_value |= 6; dbg("Setting CS6"); break;
case CS7: urb_value |= 7; dbg("Setting CS7"); break;
case CS8: urb_value |= 8; dbg("Setting CS8"); break;
default:
- dev_err(&port->dev, "CSIZE was set but not CS5-CS8\n");
+ dev_err(&port->dev, "CSIZE was set but not CS7-CS8\n");
}
}
@@ -2244,7 +2243,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
FTDI_SIO_SET_DATA_REQUEST,
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
- buf, 0, WDR_SHORT_TIMEOUT) < 0) {
+ NULL, 0, WDR_SHORT_TIMEOUT) < 0) {
dev_err(&port->dev, "%s FAILED to set "
"databits/stopbits/parity\n", __func__);
}
@@ -2256,7 +2255,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface,
- buf, 0, WDR_TIMEOUT) < 0) {
+ NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev,
"%s error from disable flowcontrol urb\n",
__func__);
@@ -2282,7 +2281,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
- buf, 0, WDR_TIMEOUT) < 0) {
+ NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev,
"urb failed to set to rts/cts flow control\n");
}
@@ -2314,7 +2313,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
urb_value , (FTDI_SIO_XON_XOFF_HS
| priv->interface),
- buf, 0, WDR_TIMEOUT) < 0) {
+ NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "urb failed to set to "
"xon/xoff flow control\n");
}
@@ -2328,7 +2327,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface,
- buf, 0, WDR_TIMEOUT) < 0) {
+ NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev,
"urb failed to clear flow control\n");
}
@@ -2342,21 +2341,22 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- unsigned char buf[2];
+ unsigned char *buf;
+ int len;
int ret;
dbg("%s TIOCMGET", __func__);
+
+ buf = kmalloc(2, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ /*
+ * The 8U232AM returns a two byte value (the SIO a 1 byte value) in
+ * the same format as the data returned from the in point.
+ */
switch (priv->chip_type) {
case SIO:
- /* Request the status from the device */
- ret = usb_control_msg(port->serial->dev,
- usb_rcvctrlpipe(port->serial->dev, 0),
- FTDI_SIO_GET_MODEM_STATUS_REQUEST,
- FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
- 0, 0,
- buf, 1, WDR_TIMEOUT);
- if (ret < 0)
- return ret;
+ len = 1;
break;
case FT8U232AM:
case FT232BM:
@@ -2364,27 +2364,30 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
case FT232RL:
case FT2232H:
case FT4232H:
- /* the 8U232AM returns a two byte value (the sio is a 1 byte
- value) - in the same format as the data returned from the in
- point */
- ret = usb_control_msg(port->serial->dev,
- usb_rcvctrlpipe(port->serial->dev, 0),
- FTDI_SIO_GET_MODEM_STATUS_REQUEST,
- FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
- 0, priv->interface,
- buf, 2, WDR_TIMEOUT);
- if (ret < 0)
- return ret;
+ len = 2;
break;
default:
- return -EFAULT;
+ ret = -EFAULT;
+ goto out;
}
- return (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
+ ret = usb_control_msg(port->serial->dev,
+ usb_rcvctrlpipe(port->serial->dev, 0),
+ FTDI_SIO_GET_MODEM_STATUS_REQUEST,
+ FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
+ 0, priv->interface,
+ buf, len, WDR_TIMEOUT);
+ if (ret < 0)
+ goto out;
+
+ ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
(buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
(buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) |
(buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) |
priv->last_dtr_rts;
+out:
+ kfree(buf);
+ return ret;
}
static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
@@ -2489,8 +2492,7 @@ void ftdi_unthrottle(struct tty_struct *tty)
port->throttled = port->throttle_req = 0;
spin_unlock_irqrestore(&port->lock, flags);
- /* Resubmit urb if throttled and open. */
- if (was_throttled && test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+ if (was_throttled)
ftdi_submit_read_urb(port, GFP_KERNEL);
}