diff options
Diffstat (limited to 'drivers/usb/serial/f81232.c')
| -rw-r--r-- | drivers/usb/serial/f81232.c | 334 |
1 files changed, 334 insertions, 0 deletions
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c new file mode 100644 index 00000000000..c5dc233db2d --- /dev/null +++ b/drivers/usb/serial/f81232.c @@ -0,0 +1,334 @@ +/* + * Fintek F81232 USB to serial adaptor driver + * + * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org) + * Copyright (C) 2012 Linux Foundation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x1934, 0x0706) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +#define CONTROL_DTR 0x01 +#define CONTROL_RTS 0x02 + +#define UART_STATE 0x08 +#define UART_STATE_TRANSIENT_MASK 0x74 +#define UART_DCD 0x01 +#define UART_DSR 0x02 +#define UART_BREAK_ERROR 0x04 +#define UART_RING 0x08 +#define UART_FRAME_ERROR 0x10 +#define UART_PARITY_ERROR 0x20 +#define UART_OVERRUN_ERROR 0x40 +#define UART_CTS 0x80 + +struct f81232_private { + spinlock_t lock; + u8 line_control; + u8 line_status; +}; + +static void f81232_update_line_status(struct usb_serial_port *port, + unsigned char *data, + unsigned int actual_length) +{ + /* + * FIXME: Update port->icount, and call + * + * wake_up_interruptible(&port->port.delta_msr_wait); + * + * on MSR changes. + */ +} + +static void f81232_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + unsigned int actual_length = urb->actual_length; + int status = urb->status; + int retval; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + usb_serial_debug_data(&port->dev, __func__, + urb->actual_length, urb->transfer_buffer); + + f81232_update_line_status(port, data, actual_length); + +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(&urb->dev->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); +} + +static void f81232_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct f81232_private *priv = usb_get_serial_port_data(port); + unsigned char *data = urb->transfer_buffer; + char tty_flag = TTY_NORMAL; + unsigned long flags; + u8 line_status; + int i; + + /* update line status */ + spin_lock_irqsave(&priv->lock, flags); + line_status = priv->line_status; + priv->line_status &= ~UART_STATE_TRANSIENT_MASK; + spin_unlock_irqrestore(&priv->lock, flags); + + if (!urb->actual_length) + return; + + /* break takes precedence over parity, */ + /* which takes precedence over framing errors */ + if (line_status & UART_BREAK_ERROR) + tty_flag = TTY_BREAK; + else if (line_status & UART_PARITY_ERROR) + tty_flag = TTY_PARITY; + else if (line_status & UART_FRAME_ERROR) + tty_flag = TTY_FRAME; + dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag); + + /* overrun is special, not associated with a char */ + if (line_status & UART_OVERRUN_ERROR) + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); + + if (port->port.console && port->sysrq) { + for (i = 0; i < urb->actual_length; ++i) + if (!usb_serial_handle_sysrq_char(port, data[i])) + tty_insert_flip_char(&port->port, data[i], + tty_flag); + } else { + tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, + urb->actual_length); + } + + tty_flip_buffer_push(&port->port); +} + +static int set_control_lines(struct usb_device *dev, u8 value) +{ + /* FIXME - Stubbed out for now */ + return 0; +} + +static void f81232_break_ctl(struct tty_struct *tty, int break_state) +{ + /* FIXME - Stubbed out for now */ + + /* + * break_state = -1 to turn on break, and 0 to turn off break + * see drivers/char/tty_io.c to see it used. + * last_set_data_urb_value NEVER has the break bit set in it. + */ +} + +static void f81232_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + /* FIXME - Stubbed out for now */ + + /* Don't change anything if nothing has changed */ + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) + return; + + /* Do the real work here... */ + if (old_termios) + tty_termios_copy_hw(&tty->termios, old_termios); +} + +static int f81232_tiocmget(struct tty_struct *tty) +{ + /* FIXME - Stubbed out for now */ + return 0; +} + +static int f81232_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + /* FIXME - Stubbed out for now */ + return 0; +} + +static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int result; + + /* Setup termios */ + if (tty) + f81232_set_termios(tty, port, NULL); + + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) { + dev_err(&port->dev, "%s - failed submitting interrupt urb," + " error %d\n", __func__, result); + return result; + } + + result = usb_serial_generic_open(tty, port); + if (result) { + usb_kill_urb(port->interrupt_in_urb); + return result; + } + + return 0; +} + +static void f81232_close(struct usb_serial_port *port) +{ + usb_serial_generic_close(port); + usb_kill_urb(port->interrupt_in_urb); +} + +static void f81232_dtr_rts(struct usb_serial_port *port, int on) +{ + struct f81232_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + /* Change DTR and RTS */ + if (on) + priv->line_control |= (CONTROL_DTR | CONTROL_RTS); + else + priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + set_control_lines(port->serial->dev, control); +} + +static int f81232_carrier_raised(struct usb_serial_port *port) +{ + struct f81232_private *priv = usb_get_serial_port_data(port); + if (priv->line_status & UART_DCD) + return 1; + return 0; +} + +static int f81232_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct serial_struct ser; + struct usb_serial_port *port = tty->driver_data; + + switch (cmd) { + case TIOCGSERIAL: + memset(&ser, 0, sizeof ser); + ser.type = PORT_16654; + ser.line = port->minor; + ser.port = port->port_number; + ser.baud_base = 460800; + + if (copy_to_user((void __user *)arg, &ser, sizeof ser)) + return -EFAULT; + + return 0; + default: + break; + } + return -ENOIOCTLCMD; +} + +static int f81232_port_probe(struct usb_serial_port *port) +{ + struct f81232_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + + usb_set_serial_port_data(port, priv); + + port->port.drain_delay = 256; + + return 0; +} + +static int f81232_port_remove(struct usb_serial_port *port) +{ + struct f81232_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +static struct usb_serial_driver f81232_device = { + .driver = { + .owner = THIS_MODULE, + .name = "f81232", + }, + .id_table = id_table, + .num_ports = 1, + .bulk_in_size = 256, + .bulk_out_size = 256, + .open = f81232_open, + .close = f81232_close, + .dtr_rts = f81232_dtr_rts, + .carrier_raised = f81232_carrier_raised, + .ioctl = f81232_ioctl, + .break_ctl = f81232_break_ctl, + .set_termios = f81232_set_termios, + .tiocmget = f81232_tiocmget, + .tiocmset = f81232_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .process_read_urb = f81232_process_read_urb, + .read_int_callback = f81232_read_int_callback, + .port_probe = f81232_port_probe, + .port_remove = f81232_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &f81232_device, + NULL, +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver"); +MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org"); +MODULE_LICENSE("GPL v2"); |