aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial/cp210x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/cp210x.c')
-rw-r--r--drivers/usb/serial/cp210x.c121
1 files changed, 61 insertions, 60 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 28af5acc336..330df5ce435 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -24,10 +24,6 @@
#include <linux/uaccess.h>
#include <linux/usb/serial.h>
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.09"
#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
/*
@@ -35,8 +31,7 @@
*/
static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
static void cp210x_close(struct usb_serial_port *);
-static void cp210x_get_termios(struct tty_struct *,
- struct usb_serial_port *port);
+static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *);
static void cp210x_get_termios_port(struct usb_serial_port *port,
unsigned int *cflagp, unsigned int *baudp);
static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
@@ -58,6 +53,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
+ { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
@@ -65,6 +61,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
+ { USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */
{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
@@ -89,6 +86,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+ { USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
@@ -106,6 +104,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
+ { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
@@ -118,8 +117,11 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
{ USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
+ { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
+ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
@@ -150,9 +152,30 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
+ { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
+ { USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
+ { USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
+ { USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
+ { USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
+ { USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
+ { USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
+ { USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
+ { USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
+ { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
+ { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
+ { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
@@ -162,14 +185,14 @@ static const struct usb_device_id id_table[] = {
MODULE_DEVICE_TABLE(usb, id_table);
-struct cp210x_port_private {
+struct cp210x_serial_private {
__u8 bInterfaceNumber;
};
static struct usb_serial_driver cp210x_device = {
.driver = {
.owner = THIS_MODULE,
- .name = "cp210x",
+ .name = "cp210x",
},
.id_table = id_table,
.num_ports = 1,
@@ -179,7 +202,7 @@ static struct usb_serial_driver cp210x_device = {
.close = cp210x_close,
.break_ctl = cp210x_break_ctl,
.set_termios = cp210x_set_termios,
- .tiocmget = cp210x_tiocmget,
+ .tiocmget = cp210x_tiocmget,
.tiocmset = cp210x_tiocmset,
.attach = cp210x_startup,
.release = cp210x_release,
@@ -276,23 +299,21 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
- struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+ struct cp210x_serial_private *spriv = usb_get_serial_data(serial);
__le32 *buf;
int result, i, length;
/* Number of integers required to contain the array */
- length = (((size - 1) | 3) + 1)/4;
+ length = (((size - 1) | 3) + 1) / 4;
buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
- if (!buf) {
- dev_err(&port->dev, "%s - out of memory.\n", __func__);
+ if (!buf)
return -ENOMEM;
- }
/* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
request, REQTYPE_INTERFACE_TO_HOST, 0x0000,
- port_priv->bInterfaceNumber, buf, size,
+ spriv->bInterfaceNumber, buf, size,
USB_CTRL_GET_TIMEOUT);
/* Convert data into an array of integers */
@@ -323,19 +344,16 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
- struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+ struct cp210x_serial_private *spriv = usb_get_serial_data(serial);
__le32 *buf;
int result, i, length;
/* Number of integers required to contain the array */
- length = (((size - 1) | 3) + 1)/4;
+ length = (((size - 1) | 3) + 1) / 4;
buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
- if (!buf) {
- dev_err(&port->dev, "%s - out of memory.\n",
- __func__);
+ if (!buf)
return -ENOMEM;
- }
/* Array of integers into bytes */
for (i = 0; i < length; i++)
@@ -345,13 +363,13 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_INTERFACE, 0x0000,
- port_priv->bInterfaceNumber, buf, size,
+ spriv->bInterfaceNumber, buf, size,
USB_CTRL_SET_TIMEOUT);
} else {
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_INTERFACE, data[0],
- port_priv->bInterfaceNumber, NULL, 0,
+ spriv->bInterfaceNumber, NULL, 0,
USB_CTRL_SET_TIMEOUT);
}
@@ -384,7 +402,8 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port,
* cp210x_quantise_baudrate
* Quantises the baud rate as per AN205 Table 1
*/
-static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
+static unsigned int cp210x_quantise_baudrate(unsigned int baud)
+{
if (baud <= 300)
baud = 300;
else if (baud <= 600) baud = 600;
@@ -445,11 +464,7 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
static void cp210x_close(struct usb_serial_port *port)
{
usb_serial_generic_close(port);
-
- mutex_lock(&port->serial->disc_mutex);
- if (!port->serial->disconnected)
- cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
- mutex_unlock(&port->serial->disc_mutex);
+ cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
}
/*
@@ -467,9 +482,7 @@ static void cp210x_get_termios(struct tty_struct *tty,
cp210x_get_termios_port(tty->driver_data,
&tty->termios.c_cflag, &baud);
tty_encode_baud_rate(tty, baud, baud);
- }
-
- else {
+ } else {
unsigned int cflag;
cflag = 0;
cp210x_get_termios_port(port, &cflag, &baud);
@@ -655,11 +668,6 @@ static void cp210x_set_termios(struct tty_struct *tty,
unsigned int bits;
unsigned int modem_ctl[4];
- dev_dbg(dev, "%s - port %d\n", __func__, port->number);
-
- if (!tty)
- return;
-
cflag = tty->termios.c_cflag;
old_cflag = old_termios->c_cflag;
@@ -693,8 +701,8 @@ static void cp210x_set_termios(struct tty_struct *tty,
break;*/
default:
dev_dbg(dev, "cp210x driver does not support the number of bits requested, using 8 bit mode\n");
- bits |= BITS_DATA_8;
- break;
+ bits |= BITS_DATA_8;
+ break;
}
if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
dev_dbg(dev, "Number of data bits requested not supported by device\n");
@@ -767,7 +775,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
}
-static int cp210x_tiocmset (struct tty_struct *tty,
+static int cp210x_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
@@ -809,7 +817,7 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS);
}
-static int cp210x_tiocmget (struct tty_struct *tty)
+static int cp210x_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int control;
@@ -829,7 +837,7 @@ static int cp210x_tiocmget (struct tty_struct *tty)
return result;
}
-static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
+static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int state;
@@ -845,40 +853,33 @@ static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
static int cp210x_startup(struct usb_serial *serial)
{
- struct cp210x_port_private *port_priv;
- int i;
+ struct usb_host_interface *cur_altsetting;
+ struct cp210x_serial_private *spriv;
/* cp210x buffers behave strangely unless device is reset */
usb_reset_device(serial->dev);
- for (i = 0; i < serial->num_ports; i++) {
- port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
- if (!port_priv)
- return -ENOMEM;
+ spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
+ if (!spriv)
+ return -ENOMEM;
- port_priv->bInterfaceNumber =
- serial->interface->cur_altsetting->desc.bInterfaceNumber;
+ cur_altsetting = serial->interface->cur_altsetting;
+ spriv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber;
- usb_set_serial_port_data(serial->port[i], port_priv);
- }
+ usb_set_serial_data(serial, spriv);
return 0;
}
static void cp210x_release(struct usb_serial *serial)
{
- struct cp210x_port_private *port_priv;
- int i;
+ struct cp210x_serial_private *spriv;
- for (i = 0; i < serial->num_ports; i++) {
- port_priv = usb_get_serial_port_data(serial->port[i]);
- kfree(port_priv);
- usb_set_serial_port_data(serial->port[i], NULL);
- }
+ spriv = usb_get_serial_data(serial);
+ kfree(spriv);
}
module_usb_serial_driver(serial_drivers, id_table);
MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-11 09:49:41 +0000