diff options
Diffstat (limited to 'drivers/usb/serial/cp210x.c')
| -rw-r--r-- | drivers/usb/serial/cp210x.c | 81 |
1 files changed, 44 insertions, 37 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index eb033fc92a1..330df5ce435 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -24,10 +24,6 @@ #include <linux/uaccess.h> #include <linux/usb/serial.h> -/* - * Version Information - */ -#define DRIVER_VERSION "v0.09" #define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver" /* @@ -35,8 +31,7 @@ */ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *); static void cp210x_close(struct usb_serial_port *); -static void cp210x_get_termios(struct tty_struct *, - struct usb_serial_port *port); +static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *); static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp); static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *, @@ -58,6 +53,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */ + { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */ { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */ @@ -65,6 +61,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */ { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */ { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */ + { USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */ { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */ @@ -89,6 +86,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ + { USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */ { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */ @@ -106,6 +104,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */ + { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ @@ -118,8 +117,11 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */ { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */ { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */ + { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */ { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */ + { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ + { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ @@ -150,9 +152,30 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ + { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ + { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */ + { USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */ + { USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */ + { USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */ + { USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */ + { USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */ + { USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */ + { USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */ + { USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */ + { USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */ + { USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */ + { USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */ + { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */ + { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */ + { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */ @@ -169,7 +192,7 @@ struct cp210x_serial_private { static struct usb_serial_driver cp210x_device = { .driver = { .owner = THIS_MODULE, - .name = "cp210x", + .name = "cp210x", }, .id_table = id_table, .num_ports = 1, @@ -179,7 +202,7 @@ static struct usb_serial_driver cp210x_device = { .close = cp210x_close, .break_ctl = cp210x_break_ctl, .set_termios = cp210x_set_termios, - .tiocmget = cp210x_tiocmget, + .tiocmget = cp210x_tiocmget, .tiocmset = cp210x_tiocmset, .attach = cp210x_startup, .release = cp210x_release, @@ -281,13 +304,11 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, int result, i, length; /* Number of integers required to contain the array */ - length = (((size - 1) | 3) + 1)/4; + length = (((size - 1) | 3) + 1) / 4; buf = kcalloc(length, sizeof(__le32), GFP_KERNEL); - if (!buf) { - dev_err(&port->dev, "%s - out of memory.\n", __func__); + if (!buf) return -ENOMEM; - } /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), @@ -328,14 +349,11 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, int result, i, length; /* Number of integers required to contain the array */ - length = (((size - 1) | 3) + 1)/4; + length = (((size - 1) | 3) + 1) / 4; buf = kmalloc(length * sizeof(__le32), GFP_KERNEL); - if (!buf) { - dev_err(&port->dev, "%s - out of memory.\n", - __func__); + if (!buf) return -ENOMEM; - } /* Array of integers into bytes */ for (i = 0; i < length; i++) @@ -384,7 +402,8 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port, * cp210x_quantise_baudrate * Quantises the baud rate as per AN205 Table 1 */ -static unsigned int cp210x_quantise_baudrate(unsigned int baud) { +static unsigned int cp210x_quantise_baudrate(unsigned int baud) +{ if (baud <= 300) baud = 300; else if (baud <= 600) baud = 600; @@ -445,11 +464,7 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) static void cp210x_close(struct usb_serial_port *port) { usb_serial_generic_close(port); - - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) - cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); - mutex_unlock(&port->serial->disc_mutex); + cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); } /* @@ -467,9 +482,7 @@ static void cp210x_get_termios(struct tty_struct *tty, cp210x_get_termios_port(tty->driver_data, &tty->termios.c_cflag, &baud); tty_encode_baud_rate(tty, baud, baud); - } - - else { + } else { unsigned int cflag; cflag = 0; cp210x_get_termios_port(port, &cflag, &baud); @@ -655,11 +668,6 @@ static void cp210x_set_termios(struct tty_struct *tty, unsigned int bits; unsigned int modem_ctl[4]; - dev_dbg(dev, "%s - port %d\n", __func__, port->number); - - if (!tty) - return; - cflag = tty->termios.c_cflag; old_cflag = old_termios->c_cflag; @@ -693,8 +701,8 @@ static void cp210x_set_termios(struct tty_struct *tty, break;*/ default: dev_dbg(dev, "cp210x driver does not support the number of bits requested, using 8 bit mode\n"); - bits |= BITS_DATA_8; - break; + bits |= BITS_DATA_8; + break; } if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dev_dbg(dev, "Number of data bits requested not supported by device\n"); @@ -767,7 +775,7 @@ static void cp210x_set_termios(struct tty_struct *tty, } -static int cp210x_tiocmset (struct tty_struct *tty, +static int cp210x_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; @@ -809,7 +817,7 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on) cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS); } -static int cp210x_tiocmget (struct tty_struct *tty) +static int cp210x_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; unsigned int control; @@ -829,7 +837,7 @@ static int cp210x_tiocmget (struct tty_struct *tty) return result; } -static void cp210x_break_ctl (struct tty_struct *tty, int break_state) +static void cp210x_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; unsigned int state; @@ -874,5 +882,4 @@ static void cp210x_release(struct usb_serial *serial) module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); |