diff options
Diffstat (limited to 'drivers/usb/serial/Kconfig')
| -rw-r--r-- | drivers/usb/serial/Kconfig | 222 |
1 files changed, 174 insertions, 48 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index b361f05cafa..3ce5c74b29e 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -4,7 +4,7 @@ menuconfig USB_SERIAL tristate "USB Serial Converter support" - depends on USB + depends on TTY ---help--- Say Y here if you have a USB device that provides normal serial ports, or acts like a serial device, and you want to connect it to @@ -42,11 +42,6 @@ config USB_SERIAL_CONSOLE If unsure, say N. -config USB_EZUSB - bool "Functions for loading firmware on EZUSB chips" - help - Say Y here if you need EZUSB device support. - config USB_SERIAL_GENERIC bool "USB Generic Serial Driver" help @@ -56,6 +51,24 @@ config USB_SERIAL_GENERIC support" be compiled as a module for this driver to be used properly. +config USB_SERIAL_SIMPLE + tristate "USB Serial Simple Driver" + help + Say Y here to use the USB serial "simple" driver. This driver + handles a wide range of very simple devices, all in one + driver. Specifically, it supports: + - Suunto ANT+ USB device. + - Fundamental Software dongle. + - HP4x calculators + - a number of Motorola phones + - Siemens USB/MPI adapter. + - ViVOtech ViVOpay USB device. + - Infineon Modem Flashloader USB interface + - ZIO Motherboard USB serial interface + + To compile this driver as a module, choose M here: the module + will be called usb-serial-simple. + config USB_SERIAL_AIRCABLE tristate "USB AIRcable Bluetooth Dongle Driver" help @@ -94,7 +107,7 @@ config USB_SERIAL_CH341 config USB_SERIAL_WHITEHEAT tristate "USB ConnectTech WhiteHEAT Serial Driver" - select USB_EZUSB + select USB_EZUSB_FX2 help Say Y here if you want to use a ConnectTech WhiteHEAT 4 port USB to serial converter device. @@ -116,14 +129,14 @@ config USB_SERIAL_DIGI_ACCELEPORT To compile this driver as a module, choose M here: the module will be called digi_acceleport. -config USB_SERIAL_CP2101 - tristate "USB CP2101 UART Bridge Controller" +config USB_SERIAL_CP210X + tristate "USB CP210x family of UART Bridge Controllers" help - Say Y here if you want to use a CP2101/CP2102 based USB to RS232 - converter. + Say Y here if you want to use a CP2101/CP2102/CP2103 based USB + to RS232 converters. To compile this driver as a module, choose M here: the - module will be called cp2101. + module will be called cp210x. config USB_SERIAL_CYPRESS_M8 tristate "USB Cypress M8 USB Serial Driver" @@ -163,20 +176,12 @@ config USB_SERIAL_FTDI_SIO To compile this driver as a module, choose M here: the module will be called ftdi_sio. -config USB_SERIAL_FUNSOFT - tristate "USB Fundamental Software Dongle Driver" - ---help--- - Say Y here if you want to use the Fundamental Software dongle. - - To compile this driver as a module, choose M here: the - module will be called funsoft. - config USB_SERIAL_VISOR tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver" help Say Y here if you want to connect to your HandSpring Visor, Palm m500 or m505 through its USB docking station. See - <http://usbvisor.sourceforge.net/> for more information on using this + <http://usbvisor.sourceforge.net/index.php3> for more information on using this driver. To compile this driver as a module, choose M here: the @@ -238,6 +243,15 @@ config USB_SERIAL_EDGEPORT_TI To compile this driver as a module, choose M here: the module will be called io_ti. +config USB_SERIAL_F81232 + tristate "USB Fintek F81232 Single Port Serial Driver" + help + Say Y here if you want to use the Fintek F81232 single + port usb to serial adapter. + + To compile this driver as a module, choose M here: the + module will be called f81232. + config USB_SERIAL_GARMIN tristate "USB Garmin GPS driver" help @@ -252,6 +266,7 @@ config USB_SERIAL_GARMIN config USB_SERIAL_IPW tristate "USB IPWireless (3G UMTS TDD) Driver" + select USB_SERIAL_WWAN help Say Y here if you want to use a IPWireless USB modem such as the ones supplied by Axity3G/Sentech South Africa. @@ -271,7 +286,7 @@ config USB_SERIAL_IUU config USB_SERIAL_KEYSPAN_PDA tristate "USB Keyspan PDA Single Port Serial Driver" - select USB_EZUSB + select USB_EZUSB_FX2 help Say Y here if you want to use a Keyspan PDA single port USB to serial converter device. This driver makes use of firmware @@ -282,14 +297,14 @@ config USB_SERIAL_KEYSPAN_PDA config USB_SERIAL_KEYSPAN tristate "USB Keyspan USA-xxx Serial Driver" - select USB_EZUSB + select USB_EZUSB_FX2 ---help--- Say Y here if you want to use Keyspan USB to serial converter devices. This driver makes use of Keyspan's official firmware and was developed with their support. You must also include firmware to support your particular device(s). - See <http://misc.nu/hugh/keyspan.html> for more information. + See <http://blemings.org/hugh/keyspan.html> for more information. To compile this driver as a module, choose M here: the module will be called keyspan. @@ -416,6 +431,14 @@ config USB_SERIAL_MCT_U232 To compile this driver as a module, choose M here: the module will be called mct_u232. +config USB_SERIAL_METRO + tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver" + ---help--- + Say Y here if you want to use a USB POS Metrologic barcode scanner. + + To compile this driver as a module, choose M here: the + module will be called metro-usb. + config USB_SERIAL_MOS7720 tristate "USB Moschip 7720 Serial Driver" ---help--- @@ -425,6 +448,16 @@ config USB_SERIAL_MOS7720 To compile this driver as a module, choose M here: the module will be called mos7720. +config USB_SERIAL_MOS7715_PARPORT + bool "Support for parallel port on the Moschip 7715" + depends on USB_SERIAL_MOS7720 + depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720 + select PARPORT_NOT_PC + ---help--- + Say Y if you have a Moschip 7715 device and would like to use + the parallel port it provides. The port will register with + the parport subsystem as a low-level driver. + config USB_SERIAL_MOS7840 tristate "USB Moschip 7840/7820 USB Serial Driver" ---help--- @@ -439,14 +472,34 @@ config USB_SERIAL_MOS7840 To compile this driver as a module, choose M here: the module will be called mos7840. If unsure, choose N. -config USB_SERIAL_MOTOROLA - tristate "USB Motorola Phone modem driver" +config USB_SERIAL_MXUPORT + tristate "USB Moxa UPORT Serial Driver" ---help--- - Say Y here if you want to use a Motorola phone with a USB - connector as a modem link. + Say Y here if you want to use a MOXA UPort Serial hub. + + This driver supports: + + [2 Port] + - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub + - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with + Isolation + + [4 Port] + - UPort 1410 : 4 Port RS-232 USB to Serial Hub + - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub + - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with + Isolation + + [8 Port] + - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub + - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub + + [16 Port] + - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub + - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub To compile this driver as a module, choose M here: the - module will be called moto_modem. If unsure, choose N. + module will be called mxuport. config USB_SERIAL_NAVMAN tristate "USB Navman GPS device" @@ -472,6 +525,27 @@ config USB_SERIAL_OTI6858 To compile this driver as a module, choose M here: the module will be called oti6858. +config USB_SERIAL_QCAUX + tristate "USB Qualcomm Auxiliary Serial Port Driver" + help + Say Y here if you want to use the auxiliary serial ports provided + by many modems based on Qualcomm chipsets. These ports often use + a proprietary protocol called DM and cannot be used for AT- or + PPP-based communication. + + To compile this driver as a module, choose M here: the + module will be called qcaux. If unsure, choose N. + +config USB_SERIAL_QUALCOMM + tristate "USB Qualcomm Serial modem" + select USB_SERIAL_WWAN + help + Say Y here if you have a Qualcomm USB modem device. These are + usually wireless cellular modems. + + To compile this driver as a module, choose M here: the + module will be called qcserial. + config USB_SERIAL_SPCP8X5 tristate "USB SPCP8x5 USB To Serial Driver" help @@ -481,14 +555,6 @@ config USB_SERIAL_SPCP8X5 To compile this driver as a module, choose M here: the module will be called spcp8x5. -config USB_SERIAL_HP4X - tristate "USB HP4x Calculators support" - help - Say Y here if you want to use an Hewlett-Packard 4x Calculator. - - To compile this driver as a module, choose M here: the - module will be called hp4x. - config USB_SERIAL_SAFE tristate "USB Safe Serial (Encapsulated) Driver" @@ -496,25 +562,26 @@ config USB_SERIAL_SAFE_PADDED bool "USB Secure Encapsulated Driver - Padded" depends on USB_SERIAL_SAFE -config USB_SERIAL_SIEMENS_MPI - tristate "USB Siemens MPI driver" - help - Say M here if you want to use a Siemens USB/MPI adapter. - - To compile this driver as a module, choose M here: the - module will be called siemens_mpi. - config USB_SERIAL_SIERRAWIRELESS tristate "USB Sierra Wireless Driver" help Say M here if you want to use Sierra Wireless devices. - Many deviecs have a feature known as TRU-Install, for those devices - to work properly the USB Storage Sierra feature must be enabled. + Many devices have a feature known as TRU-Install. For those devices + to work properly, the USB Storage Sierra feature must be enabled. To compile this driver as a module, choose M here: the module will be called sierra. +config USB_SERIAL_SYMBOL + tristate "USB Symbol Barcode driver (serial mode)" + help + Say Y here if you want to use a Symbol USB Barcode device + in serial emulation mode. + + To compile this driver as a module, choose M here: the + module will be called symbolserial. + config USB_SERIAL_TI tristate "USB TI 3410/5052 Serial Driver" help @@ -538,7 +605,7 @@ config USB_SERIAL_CYBERJACK config USB_SERIAL_XIRCOM tristate "USB Xircom / Entregra Single Port Serial Driver" - select USB_EZUSB + select USB_EZUSB_FX2 help Say Y here if you want to use a Xircom or Entregra single port USB to serial converter device. This driver makes use of firmware @@ -547,8 +614,12 @@ config USB_SERIAL_XIRCOM To compile this driver as a module, choose M here: the module will be called keyspan_pda. +config USB_SERIAL_WWAN + tristate + config USB_SERIAL_OPTION tristate "USB driver for GSM and CDMA modems" + select USB_SERIAL_WWAN help Say Y here if you have a GSM or CDMA modem that's connected to USB. @@ -582,6 +653,61 @@ config USB_SERIAL_OPTICON To compile this driver as a module, choose M here: the module will be called opticon. +config USB_SERIAL_XSENS_MT + tristate "Xsens motion tracker serial interface driver" + help + Say Y here if you want to use Xsens motion trackers. + + This driver supports the new generation of motion trackers + by Xsens. Older devices can be accessed using the FTDI_SIO + driver. + + To compile this driver as a module, choose M here: the + module will be called xsens_mt. + +config USB_SERIAL_WISHBONE + tristate "USB-Wishbone adapter interface driver" + help + Say Y here if you want to use a USB attached Wishbone bus. + + Wishbone is an open hardware SoC bus commonly used in FPGA + designs. Bus access can be serialized using the Etherbone + protocol <http://www.ohwr.org/projects/etherbone-core>. + + This driver is intended to be used with devices which attach + their internal Wishbone bus to a USB serial interface using + the Etherbone protocol. A userspace library is required to + speak the protocol made available by this driver as ttyUSBx. + + To compile this driver as a module, choose M here: the + module will be called wishbone-serial. + +config USB_SERIAL_ZTE + tristate "ZTE USB serial driver" + help + Say Y here if you want to use a ZTE USB to serial device. + + To compile this driver as a module, choose M here: the + module will be called zte. + +config USB_SERIAL_SSU100 + tristate "USB Quatech SSU-100 Single Port Serial Driver" + help + Say Y here if you want to use the Quatech SSU-100 single + port usb to serial adapter. + + To compile this driver as a module, choose M here: the + module will be called ssu100. + +config USB_SERIAL_QT2 + tristate "USB Quatech Serial Driver for USB 2 devices" + help + Say Y here if you want to use the Quatech USB 2 + serial adapters. + + To compile this driver as a module, choose M here: the + module will be called quatech-serial. + config USB_SERIAL_DEBUG tristate "USB Debugging Device" help |