diff options
Diffstat (limited to 'drivers/usb/phy/phy-omap-usb3.c')
| -rw-r--r-- | drivers/usb/phy/phy-omap-usb3.c | 353 |
1 files changed, 0 insertions, 353 deletions
diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c deleted file mode 100644 index a6e60b1e102..00000000000 --- a/drivers/usb/phy/phy-omap-usb3.c +++ /dev/null @@ -1,353 +0,0 @@ -/* - * omap-usb3 - USB PHY, talking to dwc3 controller in OMAP. - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Author: Kishon Vijay Abraham I <kishon@ti.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/usb/omap_usb.h> -#include <linux/of.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/pm_runtime.h> -#include <linux/delay.h> -#include <linux/usb/omap_control_usb.h> - -#define NUM_SYS_CLKS 5 -#define PLL_STATUS 0x00000004 -#define PLL_GO 0x00000008 -#define PLL_CONFIGURATION1 0x0000000C -#define PLL_CONFIGURATION2 0x00000010 -#define PLL_CONFIGURATION3 0x00000014 -#define PLL_CONFIGURATION4 0x00000020 - -#define PLL_REGM_MASK 0x001FFE00 -#define PLL_REGM_SHIFT 0x9 -#define PLL_REGM_F_MASK 0x0003FFFF -#define PLL_REGM_F_SHIFT 0x0 -#define PLL_REGN_MASK 0x000001FE -#define PLL_REGN_SHIFT 0x1 -#define PLL_SELFREQDCO_MASK 0x0000000E -#define PLL_SELFREQDCO_SHIFT 0x1 -#define PLL_SD_MASK 0x0003FC00 -#define PLL_SD_SHIFT 0x9 -#define SET_PLL_GO 0x1 -#define PLL_TICOPWDN 0x10000 -#define PLL_LOCK 0x2 -#define PLL_IDLE 0x1 - -/* - * This is an Empirical value that works, need to confirm the actual - * value required for the USB3PHY_PLL_CONFIGURATION2.PLL_IDLE status - * to be correctly reflected in the USB3PHY_PLL_STATUS register. - */ -# define PLL_IDLE_TIME 100; - -enum sys_clk_rate { - CLK_RATE_UNDEFINED = -1, - CLK_RATE_12MHZ, - CLK_RATE_16MHZ, - CLK_RATE_19MHZ, - CLK_RATE_26MHZ, - CLK_RATE_38MHZ -}; - -static struct usb_dpll_params omap_usb3_dpll_params[NUM_SYS_CLKS] = { - {1250, 5, 4, 20, 0}, /* 12 MHz */ - {3125, 20, 4, 20, 0}, /* 16.8 MHz */ - {1172, 8, 4, 20, 65537}, /* 19.2 MHz */ - {1250, 12, 4, 20, 0}, /* 26 MHz */ - {3125, 47, 4, 20, 92843}, /* 38.4 MHz */ -}; - -static int omap_usb3_suspend(struct usb_phy *x, int suspend) -{ - struct omap_usb *phy = phy_to_omapusb(x); - int val; - int timeout = PLL_IDLE_TIME; - - if (suspend && !phy->is_suspended) { - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - val |= PLL_IDLE; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); - - do { - val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); - if (val & PLL_TICOPWDN) - break; - udelay(1); - } while (--timeout); - - omap_control_usb3_phy_power(phy->control_dev, 0); - - phy->is_suspended = 1; - } else if (!suspend && phy->is_suspended) { - phy->is_suspended = 0; - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - val &= ~PLL_IDLE; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); - - do { - val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); - if (!(val & PLL_TICOPWDN)) - break; - udelay(1); - } while (--timeout); - } - - return 0; -} - -static inline enum sys_clk_rate __get_sys_clk_index(unsigned long rate) -{ - switch (rate) { - case 12000000: - return CLK_RATE_12MHZ; - case 16800000: - return CLK_RATE_16MHZ; - case 19200000: - return CLK_RATE_19MHZ; - case 26000000: - return CLK_RATE_26MHZ; - case 38400000: - return CLK_RATE_38MHZ; - default: - return CLK_RATE_UNDEFINED; - } -} - -static void omap_usb_dpll_relock(struct omap_usb *phy) -{ - u32 val; - unsigned long timeout; - - omap_usb_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO); - - timeout = jiffies + msecs_to_jiffies(20); - do { - val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); - if (val & PLL_LOCK) - break; - } while (!WARN_ON(time_after(jiffies, timeout))); -} - -static int omap_usb_dpll_lock(struct omap_usb *phy) -{ - u32 val; - unsigned long rate; - enum sys_clk_rate clk_index; - - rate = clk_get_rate(phy->sys_clk); - clk_index = __get_sys_clk_index(rate); - - if (clk_index == CLK_RATE_UNDEFINED) { - pr_err("dpll cannot be locked for sys clk freq:%luHz\n", rate); - return -EINVAL; - } - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); - val &= ~PLL_REGN_MASK; - val |= omap_usb3_dpll_params[clk_index].n << PLL_REGN_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - val &= ~PLL_SELFREQDCO_MASK; - val |= omap_usb3_dpll_params[clk_index].freq << PLL_SELFREQDCO_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); - val &= ~PLL_REGM_MASK; - val |= omap_usb3_dpll_params[clk_index].m << PLL_REGM_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4); - val &= ~PLL_REGM_F_MASK; - val |= omap_usb3_dpll_params[clk_index].mf << PLL_REGM_F_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val); - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3); - val &= ~PLL_SD_MASK; - val |= omap_usb3_dpll_params[clk_index].sd << PLL_SD_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val); - - omap_usb_dpll_relock(phy); - - return 0; -} - -static int omap_usb3_init(struct usb_phy *x) -{ - struct omap_usb *phy = phy_to_omapusb(x); - - omap_usb_dpll_lock(phy); - omap_control_usb3_phy_power(phy->control_dev, 1); - - return 0; -} - -static int omap_usb3_probe(struct platform_device *pdev) -{ - struct omap_usb *phy; - struct resource *res; - - phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); - if (!phy) { - dev_err(&pdev->dev, "unable to alloc mem for OMAP USB3 PHY\n"); - return -ENOMEM; - } - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl"); - phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(phy->pll_ctrl_base)) - return PTR_ERR(phy->pll_ctrl_base); - - phy->dev = &pdev->dev; - - phy->phy.dev = phy->dev; - phy->phy.label = "omap-usb3"; - phy->phy.init = omap_usb3_init; - phy->phy.set_suspend = omap_usb3_suspend; - phy->phy.type = USB_PHY_TYPE_USB3; - - phy->is_suspended = 1; - phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); - if (IS_ERR(phy->wkupclk)) { - dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); - return PTR_ERR(phy->wkupclk); - } - clk_prepare(phy->wkupclk); - - phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); - if (IS_ERR(phy->optclk)) { - dev_err(&pdev->dev, "unable to get usb_otg_ss_refclk960m\n"); - return PTR_ERR(phy->optclk); - } - clk_prepare(phy->optclk); - - phy->sys_clk = devm_clk_get(phy->dev, "sys_clkin"); - if (IS_ERR(phy->sys_clk)) { - pr_err("%s: unable to get sys_clkin\n", __func__); - return -EINVAL; - } - - phy->control_dev = omap_get_control_dev(); - if (IS_ERR(phy->control_dev)) { - dev_dbg(&pdev->dev, "Failed to get control device\n"); - return -ENODEV; - } - - omap_control_usb3_phy_power(phy->control_dev, 0); - usb_add_phy_dev(&phy->phy); - - platform_set_drvdata(pdev, phy); - - pm_runtime_enable(phy->dev); - pm_runtime_get(&pdev->dev); - - return 0; -} - -static int omap_usb3_remove(struct platform_device *pdev) -{ - struct omap_usb *phy = platform_get_drvdata(pdev); - - clk_unprepare(phy->wkupclk); - clk_unprepare(phy->optclk); - usb_remove_phy(&phy->phy); - if (!pm_runtime_suspended(&pdev->dev)) - pm_runtime_put(&pdev->dev); - pm_runtime_disable(&pdev->dev); - - return 0; -} - -#ifdef CONFIG_PM_RUNTIME - -static int omap_usb3_runtime_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_usb *phy = platform_get_drvdata(pdev); - - clk_disable(phy->wkupclk); - clk_disable(phy->optclk); - - return 0; -} - -static int omap_usb3_runtime_resume(struct device *dev) -{ - u32 ret = 0; - struct platform_device *pdev = to_platform_device(dev); - struct omap_usb *phy = platform_get_drvdata(pdev); - - ret = clk_enable(phy->optclk); - if (ret) { - dev_err(phy->dev, "Failed to enable optclk %d\n", ret); - goto err1; - } - - ret = clk_enable(phy->wkupclk); - if (ret) { - dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); - goto err2; - } - - return 0; - -err2: - clk_disable(phy->optclk); - -err1: - return ret; -} - -static const struct dev_pm_ops omap_usb3_pm_ops = { - SET_RUNTIME_PM_OPS(omap_usb3_runtime_suspend, omap_usb3_runtime_resume, - NULL) -}; - -#define DEV_PM_OPS (&omap_usb3_pm_ops) -#else -#define DEV_PM_OPS NULL -#endif - -#ifdef CONFIG_OF -static const struct of_device_id omap_usb3_id_table[] = { - { .compatible = "ti,omap-usb3" }, - {} -}; -MODULE_DEVICE_TABLE(of, omap_usb3_id_table); -#endif - -static struct platform_driver omap_usb3_driver = { - .probe = omap_usb3_probe, - .remove = omap_usb3_remove, - .driver = { - .name = "omap-usb3", - .owner = THIS_MODULE, - .pm = DEV_PM_OPS, - .of_match_table = of_match_ptr(omap_usb3_id_table), - }, -}; - -module_platform_driver(omap_usb3_driver); - -MODULE_ALIAS("platform: omap_usb3"); -MODULE_AUTHOR("Texas Instruments Inc."); -MODULE_DESCRIPTION("OMAP USB3 phy driver"); -MODULE_LICENSE("GPL v2"); |