aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/phy/phy-ab8500-usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/phy/phy-ab8500-usb.c')
-rw-r--r--drivers/usb/phy/phy-ab8500-usb.c1526
1 files changed, 1526 insertions, 0 deletions
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
new file mode 100644
index 00000000000..11ab2c45e46
--- /dev/null
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -0,0 +1,1526 @@
+/*
+ * drivers/usb/otg/ab8500_usb.c
+ *
+ * USB transceiver driver for AB8500 family chips
+ *
+ * Copyright (C) 2010-2013 ST-Ericsson AB
+ * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * Avinash Kumar <avinash.kumar@stericsson.com>
+ * Thirupathi Chippakurthy <thirupathi.chippakurthy@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/slab.h>
+#include <linux/notifier.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/usb/musb-ux500.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pinctrl/consumer.h>
+
+/* Bank AB8500_SYS_CTRL2_BLOCK */
+#define AB8500_MAIN_WD_CTRL_REG 0x01
+
+/* Bank AB8500_USB */
+#define AB8500_USB_LINE_STAT_REG 0x80
+#define AB8505_USB_LINE_STAT_REG 0x94
+#define AB8540_USB_LINK_STAT_REG 0x94
+#define AB9540_USB_LINK_STAT_REG 0x94
+#define AB8540_USB_OTG_CTL_REG 0x87
+#define AB8500_USB_PHY_CTRL_REG 0x8A
+#define AB8540_VBUS_CTRL_REG 0x82
+
+/* Bank AB8500_DEVELOPMENT */
+#define AB8500_BANK12_ACCESS 0x00
+
+/* Bank AB8500_DEBUG */
+#define AB8540_DEBUG 0x32
+#define AB8500_USB_PHY_TUNE1 0x05
+#define AB8500_USB_PHY_TUNE2 0x06
+#define AB8500_USB_PHY_TUNE3 0x07
+
+/* Bank AB8500_INTERRUPT */
+#define AB8500_IT_SOURCE2_REG 0x01
+
+#define AB8500_BIT_OTG_STAT_ID (1 << 0)
+#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0)
+#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1)
+#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0)
+#define AB8500_BIT_WD_CTRL_KICK (1 << 1)
+#define AB8500_BIT_SOURCE2_VBUSDET (1 << 7)
+#define AB8540_BIT_OTG_CTL_VBUS_VALID_ENA (1 << 0)
+#define AB8540_BIT_OTG_CTL_ID_HOST_ENA (1 << 1)
+#define AB8540_BIT_OTG_CTL_ID_DEV_ENA (1 << 5)
+#define AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA (1 << 0)
+
+#define AB8500_WD_KICK_DELAY_US 100 /* usec */
+#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */
+#define AB8500_V20_31952_DISABLE_DELAY_US 100 /* usec */
+
+/* Usb line status register */
+enum ab8500_usb_link_status {
+ USB_LINK_NOT_CONFIGURED_8500 = 0,
+ USB_LINK_STD_HOST_NC_8500,
+ USB_LINK_STD_HOST_C_NS_8500,
+ USB_LINK_STD_HOST_C_S_8500,
+ USB_LINK_HOST_CHG_NM_8500,
+ USB_LINK_HOST_CHG_HS_8500,
+ USB_LINK_HOST_CHG_HS_CHIRP_8500,
+ USB_LINK_DEDICATED_CHG_8500,
+ USB_LINK_ACA_RID_A_8500,
+ USB_LINK_ACA_RID_B_8500,
+ USB_LINK_ACA_RID_C_NM_8500,
+ USB_LINK_ACA_RID_C_HS_8500,
+ USB_LINK_ACA_RID_C_HS_CHIRP_8500,
+ USB_LINK_HM_IDGND_8500,
+ USB_LINK_RESERVED_8500,
+ USB_LINK_NOT_VALID_LINK_8500,
+};
+
+enum ab8505_usb_link_status {
+ USB_LINK_NOT_CONFIGURED_8505 = 0,
+ USB_LINK_STD_HOST_NC_8505,
+ USB_LINK_STD_HOST_C_NS_8505,
+ USB_LINK_STD_HOST_C_S_8505,
+ USB_LINK_CDP_8505,
+ USB_LINK_RESERVED0_8505,
+ USB_LINK_RESERVED1_8505,
+ USB_LINK_DEDICATED_CHG_8505,
+ USB_LINK_ACA_RID_A_8505,
+ USB_LINK_ACA_RID_B_8505,
+ USB_LINK_ACA_RID_C_NM_8505,
+ USB_LINK_RESERVED2_8505,
+ USB_LINK_RESERVED3_8505,
+ USB_LINK_HM_IDGND_8505,
+ USB_LINK_CHARGERPORT_NOT_OK_8505,
+ USB_LINK_CHARGER_DM_HIGH_8505,
+ USB_LINK_PHYEN_NO_VBUS_NO_IDGND_8505,
+ USB_LINK_STD_UPSTREAM_NO_IDGNG_NO_VBUS_8505,
+ USB_LINK_STD_UPSTREAM_8505,
+ USB_LINK_CHARGER_SE1_8505,
+ USB_LINK_CARKIT_CHGR_1_8505,
+ USB_LINK_CARKIT_CHGR_2_8505,
+ USB_LINK_ACA_DOCK_CHGR_8505,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_EN_8505,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_DISB_8505,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_EN_8505,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_8505,
+ USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_8505,
+};
+
+enum ab8540_usb_link_status {
+ USB_LINK_NOT_CONFIGURED_8540 = 0,
+ USB_LINK_STD_HOST_NC_8540,
+ USB_LINK_STD_HOST_C_NS_8540,
+ USB_LINK_STD_HOST_C_S_8540,
+ USB_LINK_CDP_8540,
+ USB_LINK_RESERVED0_8540,
+ USB_LINK_RESERVED1_8540,
+ USB_LINK_DEDICATED_CHG_8540,
+ USB_LINK_ACA_RID_A_8540,
+ USB_LINK_ACA_RID_B_8540,
+ USB_LINK_ACA_RID_C_NM_8540,
+ USB_LINK_RESERVED2_8540,
+ USB_LINK_RESERVED3_8540,
+ USB_LINK_HM_IDGND_8540,
+ USB_LINK_CHARGERPORT_NOT_OK_8540,
+ USB_LINK_CHARGER_DM_HIGH_8540,
+ USB_LINK_PHYEN_NO_VBUS_NO_IDGND_8540,
+ USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_8540,
+ USB_LINK_STD_UPSTREAM_8540,
+ USB_LINK_CHARGER_SE1_8540,
+ USB_LINK_CARKIT_CHGR_1_8540,
+ USB_LINK_CARKIT_CHGR_2_8540,
+ USB_LINK_ACA_DOCK_CHGR_8540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_EN_8540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_DISB_8540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_EN_8540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_8540,
+ USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_8540
+};
+
+enum ab9540_usb_link_status {
+ USB_LINK_NOT_CONFIGURED_9540 = 0,
+ USB_LINK_STD_HOST_NC_9540,
+ USB_LINK_STD_HOST_C_NS_9540,
+ USB_LINK_STD_HOST_C_S_9540,
+ USB_LINK_CDP_9540,
+ USB_LINK_RESERVED0_9540,
+ USB_LINK_RESERVED1_9540,
+ USB_LINK_DEDICATED_CHG_9540,
+ USB_LINK_ACA_RID_A_9540,
+ USB_LINK_ACA_RID_B_9540,
+ USB_LINK_ACA_RID_C_NM_9540,
+ USB_LINK_RESERVED2_9540,
+ USB_LINK_RESERVED3_9540,
+ USB_LINK_HM_IDGND_9540,
+ USB_LINK_CHARGERPORT_NOT_OK_9540,
+ USB_LINK_CHARGER_DM_HIGH_9540,
+ USB_LINK_PHYEN_NO_VBUS_NO_IDGND_9540,
+ USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_9540,
+ USB_LINK_STD_UPSTREAM_9540,
+ USB_LINK_CHARGER_SE1_9540,
+ USB_LINK_CARKIT_CHGR_1_9540,
+ USB_LINK_CARKIT_CHGR_2_9540,
+ USB_LINK_ACA_DOCK_CHGR_9540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_EN_9540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_DISB_9540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_EN_9540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_9540,
+ USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_9540
+};
+
+enum ab8500_usb_mode {
+ USB_IDLE = 0,
+ USB_PERIPHERAL,
+ USB_HOST,
+ USB_DEDICATED_CHG
+};
+
+/* Register USB_LINK_STATUS interrupt */
+#define AB8500_USB_FLAG_USE_LINK_STATUS_IRQ (1 << 0)
+/* Register ID_WAKEUP_F interrupt */
+#define AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ (1 << 1)
+/* Register VBUS_DET_F interrupt */
+#define AB8500_USB_FLAG_USE_VBUS_DET_IRQ (1 << 2)
+/* Driver is using the ab-iddet driver*/
+#define AB8500_USB_FLAG_USE_AB_IDDET (1 << 3)
+/* Enable setting regulators voltage */
+#define AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE (1 << 4)
+/* Enable the check_vbus_status workaround */
+#define AB8500_USB_FLAG_USE_CHECK_VBUS_STATUS (1 << 5)
+/* Enable the vbus host workaround */
+#define AB8500_USB_FLAG_USE_VBUS_HOST_QUIRK (1 << 6)
+
+struct ab8500_usb {
+ struct usb_phy phy;
+ struct device *dev;
+ struct ab8500 *ab8500;
+ unsigned vbus_draw;
+ struct work_struct phy_dis_work;
+ struct work_struct vbus_event_work;
+ enum ab8500_usb_mode mode;
+ struct clk *sysclk;
+ struct regulator *v_ape;
+ struct regulator *v_musb;
+ struct regulator *v_ulpi;
+ int saved_v_ulpi;
+ int previous_link_status_state;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_sleep;
+ bool enabled_charging_detection;
+ unsigned int flags;
+};
+
+static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x)
+{
+ return container_of(x, struct ab8500_usb, phy);
+}
+
+static void ab8500_usb_wd_workaround(struct ab8500_usb *ab)
+{
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK,
+ AB8500_MAIN_WD_CTRL_REG,
+ AB8500_BIT_WD_CTRL_ENABLE);
+
+ udelay(AB8500_WD_KICK_DELAY_US);
+
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK,
+ AB8500_MAIN_WD_CTRL_REG,
+ (AB8500_BIT_WD_CTRL_ENABLE
+ | AB8500_BIT_WD_CTRL_KICK));
+
+ udelay(AB8500_WD_V11_DISABLE_DELAY_US);
+
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK,
+ AB8500_MAIN_WD_CTRL_REG,
+ 0);
+}
+
+static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
+{
+ int ret, volt;
+
+ ret = regulator_enable(ab->v_ape);
+ if (ret)
+ dev_err(ab->dev, "Failed to enable v-ape\n");
+
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
+ ab->saved_v_ulpi = regulator_get_voltage(ab->v_ulpi);
+ if (ab->saved_v_ulpi < 0)
+ dev_err(ab->dev, "Failed to get v_ulpi voltage\n");
+
+ ret = regulator_set_voltage(ab->v_ulpi, 1300000, 1350000);
+ if (ret < 0)
+ dev_err(ab->dev, "Failed to set the Vintcore to 1.3V, ret=%d\n",
+ ret);
+
+ ret = regulator_set_optimum_mode(ab->v_ulpi, 28000);
+ if (ret < 0)
+ dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
+ ret);
+ }
+
+ ret = regulator_enable(ab->v_ulpi);
+ if (ret)
+ dev_err(ab->dev, "Failed to enable vddulpivio18\n");
+
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
+ volt = regulator_get_voltage(ab->v_ulpi);
+ if ((volt != 1300000) && (volt != 1350000))
+ dev_err(ab->dev, "Vintcore is not set to 1.3V volt=%d\n",
+ volt);
+ }
+
+ ret = regulator_enable(ab->v_musb);
+ if (ret)
+ dev_err(ab->dev, "Failed to enable musb_1v8\n");
+}
+
+static void ab8500_usb_regulator_disable(struct ab8500_usb *ab)
+{
+ int ret;
+
+ regulator_disable(ab->v_musb);
+
+ regulator_disable(ab->v_ulpi);
+
+ /* USB is not the only consumer of Vintcore, restore old settings */
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
+ if (ab->saved_v_ulpi > 0) {
+ ret = regulator_set_voltage(ab->v_ulpi,
+ ab->saved_v_ulpi, ab->saved_v_ulpi);
+ if (ret < 0)
+ dev_err(ab->dev, "Failed to set the Vintcore to %duV, ret=%d\n",
+ ab->saved_v_ulpi, ret);
+ }
+
+ ret = regulator_set_optimum_mode(ab->v_ulpi, 0);
+ if (ret < 0)
+ dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
+ ret);
+ }
+
+ regulator_disable(ab->v_ape);
+}
+
+static void ab8500_usb_wd_linkstatus(struct ab8500_usb *ab, u8 bit)
+{
+ /* Workaround for v2.0 bug # 31952 */
+ if (is_ab8500_2p0(ab->ab8500)) {
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ bit, bit);
+ udelay(AB8500_V20_31952_DISABLE_DELAY_US);
+ }
+}
+
+static void ab8500_usb_phy_enable(struct ab8500_usb *ab, bool sel_host)
+{
+ u8 bit;
+ bit = sel_host ? AB8500_BIT_PHY_CTRL_HOST_EN :
+ AB8500_BIT_PHY_CTRL_DEVICE_EN;
+
+ /* mux and configure USB pins to DEFAULT state */
+ ab->pinctrl = pinctrl_get_select(ab->dev, PINCTRL_STATE_DEFAULT);
+ if (IS_ERR(ab->pinctrl))
+ dev_err(ab->dev, "could not get/set default pinstate\n");
+
+ if (clk_prepare_enable(ab->sysclk))
+ dev_err(ab->dev, "can't prepare/enable clock\n");
+
+ ab8500_usb_regulator_enable(ab);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ bit, bit);
+
+ if (ab->flags & AB8500_USB_FLAG_USE_VBUS_HOST_QUIRK) {
+ if (sel_host)
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_USB_OTG_CTL_REG,
+ AB8540_BIT_OTG_CTL_VBUS_VALID_ENA |
+ AB8540_BIT_OTG_CTL_ID_HOST_ENA |
+ AB8540_BIT_OTG_CTL_ID_DEV_ENA);
+ }
+}
+
+static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
+{
+ u8 bit;
+ bit = sel_host ? AB8500_BIT_PHY_CTRL_HOST_EN :
+ AB8500_BIT_PHY_CTRL_DEVICE_EN;
+
+ ab8500_usb_wd_linkstatus(ab, bit);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ bit, 0);
+
+ /* Needed to disable the phy.*/
+ ab8500_usb_wd_workaround(ab);
+
+ clk_disable_unprepare(ab->sysclk);
+
+ ab8500_usb_regulator_disable(ab);
+
+ if (!IS_ERR(ab->pinctrl)) {
+ /* configure USB pins to SLEEP state */
+ ab->pins_sleep = pinctrl_lookup_state(ab->pinctrl,
+ PINCTRL_STATE_SLEEP);
+
+ if (IS_ERR(ab->pins_sleep))
+ dev_dbg(ab->dev, "could not get sleep pinstate\n");
+ else if (pinctrl_select_state(ab->pinctrl, ab->pins_sleep))
+ dev_err(ab->dev, "could not set pins to sleep state\n");
+
+ /*
+ * as USB pins are shared with iddet, release them to allow
+ * iddet to request them
+ */
+ pinctrl_put(ab->pinctrl);
+ }
+}
+
+#define ab8500_usb_host_phy_en(ab) ab8500_usb_phy_enable(ab, true)
+#define ab8500_usb_host_phy_dis(ab) ab8500_usb_phy_disable(ab, true)
+#define ab8500_usb_peri_phy_en(ab) ab8500_usb_phy_enable(ab, false)
+#define ab8500_usb_peri_phy_dis(ab) ab8500_usb_phy_disable(ab, false)
+
+static int ab9540_usb_link_status_update(struct ab8500_usb *ab,
+ enum ab9540_usb_link_status lsts)
+{
+ enum ux500_musb_vbus_id_status event = 0;
+
+ dev_dbg(ab->dev, "ab9540_usb_link_status_update %d\n", lsts);
+
+ if (ab->previous_link_status_state == USB_LINK_HM_IDGND_9540 &&
+ (lsts == USB_LINK_STD_HOST_C_NS_9540 ||
+ lsts == USB_LINK_STD_HOST_NC_9540))
+ return 0;
+
+ if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_9540 &&
+ (lsts == USB_LINK_STD_HOST_NC_9540))
+ return 0;
+
+ ab->previous_link_status_state = lsts;
+
+ switch (lsts) {
+ case USB_LINK_ACA_RID_B_9540:
+ event = UX500_MUSB_RIDB;
+ case USB_LINK_NOT_CONFIGURED_9540:
+ case USB_LINK_RESERVED0_9540:
+ case USB_LINK_RESERVED1_9540:
+ case USB_LINK_RESERVED2_9540:
+ case USB_LINK_RESERVED3_9540:
+ if (ab->mode == USB_PERIPHERAL)
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN, &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ if (event != UX500_MUSB_RIDB)
+ event = UX500_MUSB_NONE;
+ /* Fallback to default B_IDLE as nothing is connected. */
+ ab->phy.state = OTG_STATE_B_IDLE;
+ break;
+
+ case USB_LINK_ACA_RID_C_NM_9540:
+ event = UX500_MUSB_RIDC;
+ case USB_LINK_STD_HOST_NC_9540:
+ case USB_LINK_STD_HOST_C_NS_9540:
+ case USB_LINK_STD_HOST_C_S_9540:
+ case USB_LINK_CDP_9540:
+ if (ab->mode == USB_HOST) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_host_phy_dis(ab);
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (event != UX500_MUSB_RIDC)
+ event = UX500_MUSB_VBUS;
+ break;
+
+ case USB_LINK_ACA_RID_A_9540:
+ event = UX500_MUSB_RIDA;
+ case USB_LINK_HM_IDGND_9540:
+ case USB_LINK_STD_UPSTREAM_9540:
+ if (ab->mode == USB_PERIPHERAL) {
+ ab->mode = USB_HOST;
+ ab8500_usb_peri_phy_dis(ab);
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_HOST;
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ ab->phy.otg->default_a = true;
+ if (event != UX500_MUSB_RIDA)
+ event = UX500_MUSB_ID;
+
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_DEDICATED_CHG_9540:
+ ab->mode = USB_DEDICATED_CHG;
+ event = UX500_MUSB_CHARGER;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_PHYEN_NO_VBUS_NO_IDGND_9540:
+ case USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_9540:
+ if (!(is_ab9540_2p0_or_earlier(ab->ab8500))) {
+ event = UX500_MUSB_NONE;
+ if (ab->mode == USB_HOST) {
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_host_phy_dis(ab);
+ ab->mode = USB_IDLE;
+ }
+ if (ab->mode == USB_PERIPHERAL) {
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_peri_phy_dis(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN,
+ &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int ab8540_usb_link_status_update(struct ab8500_usb *ab,
+ enum ab8540_usb_link_status lsts)
+{
+ enum ux500_musb_vbus_id_status event = 0;
+
+ dev_dbg(ab->dev, "ab8540_usb_link_status_update %d\n", lsts);
+
+ if (ab->enabled_charging_detection) {
+ /* Disable USB Charger detection */
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_VBUS_CTRL_REG,
+ AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA, 0x00);
+ ab->enabled_charging_detection = false;
+ }
+
+ /*
+ * Spurious link_status interrupts are seen in case of a
+ * disconnection of a device in IDGND and RIDA stage
+ */
+ if (ab->previous_link_status_state == USB_LINK_HM_IDGND_8540 &&
+ (lsts == USB_LINK_STD_HOST_C_NS_8540 ||
+ lsts == USB_LINK_STD_HOST_NC_8540))
+ return 0;
+
+ if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_8540 &&
+ (lsts == USB_LINK_STD_HOST_NC_8540))
+ return 0;
+
+ ab->previous_link_status_state = lsts;
+
+ switch (lsts) {
+ case USB_LINK_ACA_RID_B_8540:
+ event = UX500_MUSB_RIDB;
+ case USB_LINK_NOT_CONFIGURED_8540:
+ case USB_LINK_RESERVED0_8540:
+ case USB_LINK_RESERVED1_8540:
+ case USB_LINK_RESERVED2_8540:
+ case USB_LINK_RESERVED3_8540:
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ if (event != UX500_MUSB_RIDB)
+ event = UX500_MUSB_NONE;
+ /*
+ * Fallback to default B_IDLE as nothing
+ * is connected
+ */
+ ab->phy.state = OTG_STATE_B_IDLE;
+ break;
+
+ case USB_LINK_ACA_RID_C_NM_8540:
+ event = UX500_MUSB_RIDC;
+ case USB_LINK_STD_HOST_NC_8540:
+ case USB_LINK_STD_HOST_C_NS_8540:
+ case USB_LINK_STD_HOST_C_S_8540:
+ case USB_LINK_CDP_8540:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (event != UX500_MUSB_RIDC)
+ event = UX500_MUSB_VBUS;
+ break;
+
+ case USB_LINK_ACA_RID_A_8540:
+ case USB_LINK_ACA_DOCK_CHGR_8540:
+ event = UX500_MUSB_RIDA;
+ case USB_LINK_HM_IDGND_8540:
+ case USB_LINK_STD_UPSTREAM_8540:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_HOST;
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ ab->phy.otg->default_a = true;
+ if (event != UX500_MUSB_RIDA)
+ event = UX500_MUSB_ID;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_DEDICATED_CHG_8540:
+ ab->mode = USB_DEDICATED_CHG;
+ event = UX500_MUSB_CHARGER;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_PHYEN_NO_VBUS_NO_IDGND_8540:
+ case USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_8540:
+ event = UX500_MUSB_NONE;
+ if (ab->mode == USB_HOST) {
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_host_phy_dis(ab);
+ ab->mode = USB_IDLE;
+ }
+ if (ab->mode == USB_PERIPHERAL) {
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_peri_phy_dis(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN, &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ }
+ break;
+
+ default:
+ event = UX500_MUSB_NONE;
+ break;
+ }
+
+ return 0;
+}
+
+static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
+ enum ab8505_usb_link_status lsts)
+{
+ enum ux500_musb_vbus_id_status event = 0;
+
+ dev_dbg(ab->dev, "ab8505_usb_link_status_update %d\n", lsts);
+
+ /*
+ * Spurious link_status interrupts are seen at the time of
+ * disconnection of a device in RIDA state
+ */
+ if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_8505 &&
+ (lsts == USB_LINK_STD_HOST_NC_8505))
+ return 0;
+
+ ab->previous_link_status_state = lsts;
+
+ switch (lsts) {
+ case USB_LINK_ACA_RID_B_8505:
+ event = UX500_MUSB_RIDB;
+ case USB_LINK_NOT_CONFIGURED_8505:
+ case USB_LINK_RESERVED0_8505:
+ case USB_LINK_RESERVED1_8505:
+ case USB_LINK_RESERVED2_8505:
+ case USB_LINK_RESERVED3_8505:
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ if (event != UX500_MUSB_RIDB)
+ event = UX500_MUSB_NONE;
+ /*
+ * Fallback to default B_IDLE as nothing
+ * is connected
+ */
+ ab->phy.state = OTG_STATE_B_IDLE;
+ break;
+
+ case USB_LINK_ACA_RID_C_NM_8505:
+ event = UX500_MUSB_RIDC;
+ case USB_LINK_STD_HOST_NC_8505:
+ case USB_LINK_STD_HOST_C_NS_8505:
+ case USB_LINK_STD_HOST_C_S_8505:
+ case USB_LINK_CDP_8505:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (event != UX500_MUSB_RIDC)
+ event = UX500_MUSB_VBUS;
+ break;
+
+ case USB_LINK_ACA_RID_A_8505:
+ case USB_LINK_ACA_DOCK_CHGR_8505:
+ event = UX500_MUSB_RIDA;
+ case USB_LINK_HM_IDGND_8505:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_HOST;
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ ab->phy.otg->default_a = true;
+ if (event != UX500_MUSB_RIDA)
+ event = UX500_MUSB_ID;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_DEDICATED_CHG_8505:
+ ab->mode = USB_DEDICATED_CHG;
+ event = UX500_MUSB_CHARGER;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
+ enum ab8500_usb_link_status lsts)
+{
+ enum ux500_musb_vbus_id_status event = 0;
+
+ dev_dbg(ab->dev, "ab8500_usb_link_status_update %d\n", lsts);
+
+ /*
+ * Spurious link_status interrupts are seen in case of a
+ * disconnection of a device in IDGND and RIDA stage
+ */
+ if (ab->previous_link_status_state == USB_LINK_HM_IDGND_8500 &&
+ (lsts == USB_LINK_STD_HOST_C_NS_8500 ||
+ lsts == USB_LINK_STD_HOST_NC_8500))
+ return 0;
+
+ if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_8500 &&
+ lsts == USB_LINK_STD_HOST_NC_8500)
+ return 0;
+
+ ab->previous_link_status_state = lsts;
+
+ switch (lsts) {
+ case USB_LINK_ACA_RID_B_8500:
+ event = UX500_MUSB_RIDB;
+ case USB_LINK_NOT_CONFIGURED_8500:
+ case USB_LINK_NOT_VALID_LINK_8500:
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ if (event != UX500_MUSB_RIDB)
+ event = UX500_MUSB_NONE;
+ /* Fallback to default B_IDLE as nothing is connected */
+ ab->phy.state = OTG_STATE_B_IDLE;
+ break;
+
+ case USB_LINK_ACA_RID_C_NM_8500:
+ case USB_LINK_ACA_RID_C_HS_8500:
+ case USB_LINK_ACA_RID_C_HS_CHIRP_8500:
+ event = UX500_MUSB_RIDC;
+ case USB_LINK_STD_HOST_NC_8500:
+ case USB_LINK_STD_HOST_C_NS_8500:
+ case USB_LINK_STD_HOST_C_S_8500:
+ case USB_LINK_HOST_CHG_NM_8500:
+ case USB_LINK_HOST_CHG_HS_8500:
+ case USB_LINK_HOST_CHG_HS_CHIRP_8500:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (event != UX500_MUSB_RIDC)
+ event = UX500_MUSB_VBUS;
+ break;
+
+ case USB_LINK_ACA_RID_A_8500:
+ event = UX500_MUSB_RIDA;
+ case USB_LINK_HM_IDGND_8500:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_HOST;
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ ab->phy.otg->default_a = true;
+ if (event != UX500_MUSB_RIDA)
+ event = UX500_MUSB_ID;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_DEDICATED_CHG_8500:
+ ab->mode = USB_DEDICATED_CHG;
+ event = UX500_MUSB_CHARGER;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_RESERVED_8500:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * Connection Sequence:
+ * 1. Link Status Interrupt
+ * 2. Enable AB clock
+ * 3. Enable AB regulators
+ * 4. Enable USB phy
+ * 5. Reset the musb controller
+ * 6. Switch the ULPI GPIO pins to fucntion mode
+ * 7. Enable the musb Peripheral5 clock
+ * 8. Restore MUSB context
+ */
+static int abx500_usb_link_status_update(struct ab8500_usb *ab)
+{
+ u8 reg;
+ int ret = 0;
+
+ if (is_ab8500(ab->ab8500)) {
+ enum ab8500_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_LINE_STAT_REG, &reg);
+ lsts = (reg >> 3) & 0x0F;
+ ret = ab8500_usb_link_status_update(ab, lsts);
+ } else if (is_ab8505(ab->ab8500)) {
+ enum ab8505_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB8505_USB_LINE_STAT_REG, &reg);
+ lsts = (reg >> 3) & 0x1F;
+ ret = ab8505_usb_link_status_update(ab, lsts);
+ } else if (is_ab8540(ab->ab8500)) {
+ enum ab8540_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_USB_LINK_STAT_REG, &reg);
+ lsts = (reg >> 3) & 0xFF;
+ ret = ab8540_usb_link_status_update(ab, lsts);
+ } else if (is_ab9540(ab->ab8500)) {
+ enum ab9540_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB9540_USB_LINK_STAT_REG, &reg);
+ lsts = (reg >> 3) & 0xFF;
+ ret = ab9540_usb_link_status_update(ab, lsts);
+ }
+
+ return ret;
+}
+
+/*
+ * Disconnection Sequence:
+ * 1. Disconect Interrupt
+ * 2. Disable regulators
+ * 3. Disable AB clock
+ * 4. Disable the Phy
+ * 5. Link Status Interrupt
+ * 6. Disable Musb Clock
+ */
+static irqreturn_t ab8500_usb_disconnect_irq(int irq, void *data)
+{
+ struct ab8500_usb *ab = (struct ab8500_usb *) data;
+ enum usb_phy_events event = UX500_MUSB_NONE;
+
+ /* Link status will not be updated till phy is disabled. */
+ if (ab->mode == USB_HOST) {
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_host_phy_dis(ab);
+ ab->mode = USB_IDLE;
+ }
+
+ if (ab->mode == USB_PERIPHERAL) {
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_peri_phy_dis(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN, &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ }
+
+ if (is_ab8500_2p0(ab->ab8500)) {
+ if (ab->mode == USB_DEDICATED_CHG) {
+ ab8500_usb_wd_linkstatus(ab,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN);
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN, 0);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ab8500_usb_link_status_irq(int irq, void *data)
+{
+ struct ab8500_usb *ab = (struct ab8500_usb *)data;
+
+ abx500_usb_link_status_update(ab);
+
+ return IRQ_HANDLED;
+}
+
+static void ab8500_usb_phy_disable_work(struct work_struct *work)
+{
+ struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
+ phy_dis_work);
+
+ if (!ab->phy.otg->host)
+ ab8500_usb_host_phy_dis(ab);
+
+ if (!ab->phy.otg->gadget)
+ ab8500_usb_peri_phy_dis(ab);
+}
+
+/* Check if VBUS is set and linkstatus has not detected a cable. */
+static bool ab8500_usb_check_vbus_status(struct ab8500_usb *ab)
+{
+ u8 isource2;
+ u8 reg;
+ enum ab8540_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_INTERRUPT, AB8500_IT_SOURCE2_REG,
+ &isource2);
+
+ /* If Vbus is below 3.6V abort */
+ if (!(isource2 & AB8500_BIT_SOURCE2_VBUSDET))
+ return false;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_USB_LINK_STAT_REG,
+ &reg);
+
+ lsts = (reg >> 3) & 0xFF;
+
+ /* Check if linkstatus has detected a cable */
+ if (lsts)
+ return false;
+
+ return true;
+}
+
+/* re-trigger charger detection again with watchdog re-kick. */
+static void ab8500_usb_vbus_turn_on_event_work(struct work_struct *work)
+{
+ struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
+ vbus_event_work);
+
+ if (ab->mode != USB_IDLE)
+ return;
+
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK, AB8500_MAIN_WD_CTRL_REG,
+ AB8500_BIT_WD_CTRL_ENABLE);
+
+ udelay(100);
+
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK, AB8500_MAIN_WD_CTRL_REG,
+ AB8500_BIT_WD_CTRL_ENABLE | AB8500_BIT_WD_CTRL_KICK);
+
+ udelay(100);
+
+ /* Disable Main watchdog */
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK, AB8500_MAIN_WD_CTRL_REG,
+ 0x0);
+
+ /* Enable USB Charger detection */
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_VBUS_CTRL_REG,
+ AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA,
+ AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA);
+
+ ab->enabled_charging_detection = true;
+}
+
+static unsigned ab8500_eyediagram_workaroud(struct ab8500_usb *ab, unsigned mA)
+{
+ /*
+ * AB8500 V2 has eye diagram issues when drawing more than 100mA from
+ * VBUS. Set charging current to 100mA in case of standard host
+ */
+ if (is_ab8500_2p0_or_earlier(ab->ab8500))
+ if (mA > 100)
+ mA = 100;
+
+ return mA;
+}
+
+static int ab8500_usb_set_power(struct usb_phy *phy, unsigned mA)
+{
+ struct ab8500_usb *ab;
+
+ if (!phy)
+ return -ENODEV;
+
+ ab = phy_to_ab(phy);
+
+ mA = ab8500_eyediagram_workaroud(ab, mA);
+
+ ab->vbus_draw = mA;
+
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_VBUS, &ab->vbus_draw);
+
+ return 0;
+}
+
+static int ab8500_usb_set_suspend(struct usb_phy *x, int suspend)
+{
+ /* TODO */
+ return 0;
+}
+
+static int ab8500_usb_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ struct ab8500_usb *ab;
+
+ if (!otg)
+ return -ENODEV;
+
+ ab = phy_to_ab(otg->phy);
+
+ ab->phy.otg->gadget = gadget;
+
+ /* Some drivers call this function in atomic context.
+ * Do not update ab8500 registers directly till this
+ * is fixed.
+ */
+
+ if ((ab->mode != USB_IDLE) && !gadget) {
+ ab->mode = USB_IDLE;
+ schedule_work(&ab->phy_dis_work);
+ }
+
+ return 0;
+}
+
+static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ struct ab8500_usb *ab;
+
+ if (!otg)
+ return -ENODEV;
+
+ ab = phy_to_ab(otg->phy);
+
+ ab->phy.otg->host = host;
+
+ /* Some drivers call this function in atomic context.
+ * Do not update ab8500 registers directly till this
+ * is fixed.
+ */
+
+ if ((ab->mode != USB_IDLE) && !host) {
+ ab->mode = USB_IDLE;
+ schedule_work(&ab->phy_dis_work);
+ }
+
+ return 0;
+}
+
+static void ab8500_usb_restart_phy(struct ab8500_usb *ab)
+{
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN);
+
+ udelay(100);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN,
+ 0);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_HOST_EN,
+ AB8500_BIT_PHY_CTRL_HOST_EN);
+
+ udelay(100);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_HOST_EN,
+ 0);
+}
+
+static int ab8500_usb_regulator_get(struct ab8500_usb *ab)
+{
+ int err;
+
+ ab->v_ape = devm_regulator_get(ab->dev, "v-ape");
+ if (IS_ERR(ab->v_ape)) {
+ dev_err(ab->dev, "Could not get v-ape supply\n");
+ err = PTR_ERR(ab->v_ape);
+ return err;
+ }
+
+ ab->v_ulpi = devm_regulator_get(ab->dev, "vddulpivio18");
+ if (IS_ERR(ab->v_ulpi)) {
+ dev_err(ab->dev, "Could not get vddulpivio18 supply\n");
+ err = PTR_ERR(ab->v_ulpi);
+ return err;
+ }
+
+ ab->v_musb = devm_regulator_get(ab->dev, "musb_1v8");
+ if (IS_ERR(ab->v_musb)) {
+ dev_err(ab->dev, "Could not get musb_1v8 supply\n");
+ err = PTR_ERR(ab->v_musb);
+ return err;
+ }
+
+ return 0;
+}
+
+static int ab8500_usb_irq_setup(struct platform_device *pdev,
+ struct ab8500_usb *ab)
+{
+ int err;
+ int irq;
+
+ if (ab->flags & AB8500_USB_FLAG_USE_LINK_STATUS_IRQ) {
+ irq = platform_get_irq_byname(pdev, "USB_LINK_STATUS");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Link status irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_link_status_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED,
+ "usb-link-status", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for link status irq\n");
+ return err;
+ }
+ }
+
+ if (ab->flags & AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ) {
+ irq = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "ID fall irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_disconnect_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED,
+ "usb-id-fall", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for ID fall irq\n");
+ return err;
+ }
+ }
+
+ if (ab->flags & AB8500_USB_FLAG_USE_VBUS_DET_IRQ) {
+ irq = platform_get_irq_byname(pdev, "VBUS_DET_F");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "VBUS fall irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_disconnect_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED,
+ "usb-vbus-fall", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static void ab8500_usb_set_ab8500_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x78);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+}
+
+static void ab8500_usb_set_ab8505_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
+ 0x01, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1,
+ 0xC8, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2,
+ 0x60, 0x60);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3,
+ 0xFC, 0x80);
+
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
+ 0x00, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+}
+
+static void ab8500_usb_set_ab8540_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8540_DEBUG, AB8500_USB_PHY_TUNE1, 0xCC);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register ret=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8540_DEBUG, AB8500_USB_PHY_TUNE2, 0x60);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register ret=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8540_DEBUG, AB8500_USB_PHY_TUNE3, 0x90);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester ret=%d\n",
+ err);
+}
+
+static void ab8500_usb_set_ab9540_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x60);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x80);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+}
+
+static int ab8500_usb_probe(struct platform_device *pdev)
+{
+ struct ab8500_usb *ab;
+ struct ab8500 *ab8500;
+ struct usb_otg *otg;
+ int err;
+ int rev;
+
+ ab8500 = dev_get_drvdata(pdev->dev.parent);
+ rev = abx500_get_chip_id(&pdev->dev);
+
+ if (is_ab8500_1p1_or_earlier(ab8500)) {
+ dev_err(&pdev->dev, "Unsupported AB8500 chip rev=%d\n", rev);
+ return -ENODEV;
+ }
+
+ ab = devm_kzalloc(&pdev->dev, sizeof(*ab), GFP_KERNEL);
+ if (!ab)
+ return -ENOMEM;
+
+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg)
+ return -ENOMEM;
+
+ ab->dev = &pdev->dev;
+ ab->ab8500 = ab8500;
+ ab->phy.dev = ab->dev;
+ ab->phy.otg = otg;
+ ab->phy.label = "ab8500";
+ ab->phy.set_suspend = ab8500_usb_set_suspend;
+ ab->phy.set_power = ab8500_usb_set_power;
+ ab->phy.state = OTG_STATE_UNDEFINED;
+
+ otg->phy = &ab->phy;
+ otg->set_host = ab8500_usb_set_host;
+ otg->set_peripheral = ab8500_usb_set_peripheral;
+
+ if (is_ab8500(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ } else if (is_ab8505(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ } else if (is_ab8540(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_USE_CHECK_VBUS_STATUS |
+ AB8500_USB_FLAG_USE_VBUS_HOST_QUIRK |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ } else if (is_ab9540(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ if (is_ab9540_2p0_or_earlier(ab->ab8500))
+ ab->flags |= AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ;
+ }
+
+ /* Disable regulator voltage setting for AB8500 <= v2.0 */
+ if (is_ab8500_2p0_or_earlier(ab->ab8500))
+ ab->flags &= ~AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+
+ platform_set_drvdata(pdev, ab);
+
+ /* all: Disable phy when called from set_host and set_peripheral */
+ INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);
+
+ INIT_WORK(&ab->vbus_event_work, ab8500_usb_vbus_turn_on_event_work);
+
+ err = ab8500_usb_regulator_get(ab);
+ if (err)
+ return err;
+
+ ab->sysclk = devm_clk_get(ab->dev, "sysclk");
+ if (IS_ERR(ab->sysclk)) {
+ dev_err(ab->dev, "Could not get sysclk.\n");
+ return PTR_ERR(ab->sysclk);
+ }
+
+ err = ab8500_usb_irq_setup(pdev, ab);
+ if (err < 0)
+ return err;
+
+ err = usb_add_phy(&ab->phy, USB_PHY_TYPE_USB2);
+ if (err) {
+ dev_err(&pdev->dev, "Can't register transceiver\n");
+ return err;
+ }
+
+ if (is_ab8500(ab->ab8500) && !is_ab8500_2p0_or_earlier(ab->ab8500))
+ /* Phy tuning values for AB8500 > v2.0 */
+ ab8500_usb_set_ab8500_tuning_values(ab);
+ else if (is_ab8505(ab->ab8500))
+ /* Phy tuning values for AB8505 */
+ ab8500_usb_set_ab8505_tuning_values(ab);
+ else if (is_ab8540(ab->ab8500))
+ /* Phy tuning values for AB8540 */
+ ab8500_usb_set_ab8540_tuning_values(ab);
+ else if (is_ab9540(ab->ab8500))
+ /* Phy tuning values for AB9540 */
+ ab8500_usb_set_ab9540_tuning_values(ab);
+
+ /* Needed to enable ID detection. */
+ ab8500_usb_wd_workaround(ab);
+
+ /*
+ * This is required for usb-link-status to work properly when a
+ * cable is connected at boot time.
+ */
+ ab8500_usb_restart_phy(ab);
+
+ if (ab->flags & AB8500_USB_FLAG_USE_CHECK_VBUS_STATUS) {
+ if (ab8500_usb_check_vbus_status(ab))
+ schedule_work(&ab->vbus_event_work);
+ }
+
+ abx500_usb_link_status_update(ab);
+
+ dev_info(&pdev->dev, "revision 0x%2x driver initialized\n", rev);
+
+ return 0;
+}
+
+static int ab8500_usb_remove(struct platform_device *pdev)
+{
+ struct ab8500_usb *ab = platform_get_drvdata(pdev);
+
+ cancel_work_sync(&ab->phy_dis_work);
+ cancel_work_sync(&ab->vbus_event_work);
+
+ usb_remove_phy(&ab->phy);
+
+ if (ab->mode == USB_HOST)
+ ab8500_usb_host_phy_dis(ab);
+ else if (ab->mode == USB_PERIPHERAL)
+ ab8500_usb_peri_phy_dis(ab);
+
+ return 0;
+}
+
+static struct platform_device_id ab8500_usb_devtype[] = {
+ { .name = "ab8500-usb", },
+ { .name = "ab8540-usb", },
+ { .name = "ab9540-usb", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, ab8500_usb_devtype);
+
+static struct platform_driver ab8500_usb_driver = {
+ .probe = ab8500_usb_probe,
+ .remove = ab8500_usb_remove,
+ .id_table = ab8500_usb_devtype,
+ .driver = {
+ .name = "abx5x0-usb",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ab8500_usb_init(void)
+{
+ return platform_driver_register(&ab8500_usb_driver);
+}
+subsys_initcall(ab8500_usb_init);
+
+static void __exit ab8500_usb_exit(void)
+{
+ platform_driver_unregister(&ab8500_usb_driver);
+}
+module_exit(ab8500_usb_exit);
+
+MODULE_AUTHOR("ST-Ericsson AB");
+MODULE_DESCRIPTION("AB8500 family usb transceiver driver");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-04 01:42:56 +0000