diff options
Diffstat (limited to 'drivers/usb/otg')
| -rw-r--r-- | drivers/usb/otg/Kconfig | 125 | ||||
| -rw-r--r-- | drivers/usb/otg/Makefile | 21 | ||||
| -rw-r--r-- | drivers/usb/otg/ab8500-usb.c | 585 | ||||
| -rw-r--r-- | drivers/usb/otg/gpio_vbus.c | 356 | ||||
| -rw-r--r-- | drivers/usb/otg/isp1301_omap.c | 1666 | ||||
| -rw-r--r-- | drivers/usb/otg/langwell_otg.c | 2381 | ||||
| -rw-r--r-- | drivers/usb/otg/msm_otg.c | 1124 | ||||
| -rw-r--r-- | drivers/usb/otg/nop-usb-xceiv.c | 179 | ||||
| -rw-r--r-- | drivers/usb/otg/otg.c | 66 | ||||
| -rw-r--r-- | drivers/usb/otg/twl4030-usb.c | 718 | ||||
| -rw-r--r-- | drivers/usb/otg/twl6030-usb.c | 503 | ||||
| -rw-r--r-- | drivers/usb/otg/ulpi.c | 270 | ||||
| -rw-r--r-- | drivers/usb/otg/ulpi_viewport.c | 80 |
13 files changed, 0 insertions, 8074 deletions
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig deleted file mode 100644 index daf3e5f1a0e..00000000000 --- a/drivers/usb/otg/Kconfig +++ /dev/null @@ -1,125 +0,0 @@ -# -# USB OTG infrastructure may be needed for peripheral-only, host-only, -# or OTG-capable configurations when OTG transceivers or controllers -# are used. -# - -comment "OTG and related infrastructure" - -config USB_OTG_UTILS - bool - help - Select this to make sure the build includes objects from - the OTG infrastructure directory. - -if USB || USB_GADGET - -# -# USB Transceiver Drivers -# -config USB_GPIO_VBUS - tristate "GPIO based peripheral-only VBUS sensing 'transceiver'" - depends on GENERIC_GPIO - select USB_OTG_UTILS - help - Provides simple GPIO VBUS sensing for controllers with an - internal transceiver via the otg_transceiver interface, and - optionally control of a D+ pullup GPIO as well as a VBUS - current limit regulator. - -config ISP1301_OMAP - tristate "Philips ISP1301 with OMAP OTG" - depends on I2C && ARCH_OMAP_OTG - select USB_OTG_UTILS - help - If you say yes here you get support for the Philips ISP1301 - USB-On-The-Go transceiver working with the OMAP OTG controller. - The ISP1301 is a full speed USB transceiver which is used in - products including H2, H3, and H4 development boards for Texas - Instruments OMAP processors. - - This driver can also be built as a module. If so, the module - will be called isp1301_omap. - -config USB_ULPI - bool "Generic ULPI Transceiver Driver" - depends on ARM - select USB_OTG_UTILS - help - Enable this to support ULPI connected USB OTG transceivers which - are likely found on embedded boards. - -config USB_ULPI_VIEWPORT - bool - depends on USB_ULPI - help - Provides read/write operations to the ULPI phy register set for - controllers with a viewport register (e.g. Chipidea/ARC controllers). - -config TWL4030_USB - tristate "TWL4030 USB Transceiver Driver" - depends on TWL4030_CORE && REGULATOR_TWL4030 - select USB_OTG_UTILS - help - Enable this to support the USB OTG transceiver on TWL4030 - family chips (including the TWL5030 and TPS659x0 devices). - This transceiver supports high and full speed devices plus, - in host mode, low speed. - -config TWL6030_USB - tristate "TWL6030 USB Transceiver Driver" - depends on TWL4030_CORE - select USB_OTG_UTILS - help - Enable this to support the USB OTG transceiver on TWL6030 - family chips. This TWL6030 transceiver has the VBUS and ID GND - and OTG SRP events capabilities. For all other transceiver functionality - UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs - are hooked to this driver through platform_data structure. - The definition of internal PHY APIs are in the mach-omap2 layer. - -config NOP_USB_XCEIV - tristate "NOP USB Transceiver Driver" - select USB_OTG_UTILS - help - this driver is to be used by all the usb transceiver which are either - built-in with usb ip or which are autonomous and doesn't require any - phy programming such as ISP1x04 etc. - -config USB_LANGWELL_OTG - tristate "Intel Langwell USB OTG dual-role support" - depends on USB && PCI && INTEL_SCU_IPC - select USB_OTG - select USB_OTG_UTILS - help - Say Y here if you want to build Intel Langwell USB OTG - transciever driver in kernel. This driver implements role - switch between EHCI host driver and Langwell USB OTG - client driver. - - To compile this driver as a module, choose M here: the - module will be called langwell_otg. - -config USB_MSM_OTG - tristate "OTG support for Qualcomm on-chip USB controller" - depends on (USB || USB_GADGET) && ARCH_MSM - select USB_OTG_UTILS - help - Enable this to support the USB OTG transceiver on MSM chips. It - handles PHY initialization, clock management, and workarounds - required after resetting the hardware and power management. - This driver is required even for peripheral only or host only - mode configurations. - This driver is not supported on boards like trout which - has an external PHY. - -config AB8500_USB - tristate "AB8500 USB Transceiver Driver" - depends on AB8500_CORE - select USB_OTG_UTILS - help - Enable this to support the USB OTG transceiver in AB8500 chip. - This transceiver supports high and full speed devices plus, - in host mode, low speed. - -endif # USB || OTG diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile deleted file mode 100644 index e22d917de01..00000000000 --- a/drivers/usb/otg/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# -# OTG infrastructure and transceiver drivers -# - -ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG -ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG - -# infrastructure -obj-$(CONFIG_USB_OTG_UTILS) += otg.o - -# transceiver drivers -obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o -obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o -obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o -obj-$(CONFIG_TWL6030_USB) += twl6030-usb.o -obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o -obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o -obj-$(CONFIG_USB_ULPI) += ulpi.o -obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o -obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o -obj-$(CONFIG_AB8500_USB) += ab8500-usb.o diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c deleted file mode 100644 index 07ccea9ada4..00000000000 --- a/drivers/usb/otg/ab8500-usb.c +++ /dev/null @@ -1,585 +0,0 @@ -/* - * drivers/usb/otg/ab8500_usb.c - * - * USB transceiver driver for AB8500 chip - * - * Copyright (C) 2010 ST-Ericsson AB - * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/usb/otg.h> -#include <linux/slab.h> -#include <linux/notifier.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/mfd/abx500.h> -#include <linux/mfd/ab8500.h> - -#define AB8500_MAIN_WD_CTRL_REG 0x01 -#define AB8500_USB_LINE_STAT_REG 0x80 -#define AB8500_USB_PHY_CTRL_REG 0x8A - -#define AB8500_BIT_OTG_STAT_ID (1 << 0) -#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0) -#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1) -#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0) -#define AB8500_BIT_WD_CTRL_KICK (1 << 1) - -#define AB8500_V1x_LINK_STAT_WAIT (HZ/10) -#define AB8500_WD_KICK_DELAY_US 100 /* usec */ -#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */ -#define AB8500_WD_V10_DISABLE_DELAY_MS 100 /* ms */ - -/* Usb line status register */ -enum ab8500_usb_link_status { - USB_LINK_NOT_CONFIGURED = 0, - USB_LINK_STD_HOST_NC, - USB_LINK_STD_HOST_C_NS, - USB_LINK_STD_HOST_C_S, - USB_LINK_HOST_CHG_NM, - USB_LINK_HOST_CHG_HS, - USB_LINK_HOST_CHG_HS_CHIRP, - USB_LINK_DEDICATED_CHG, - USB_LINK_ACA_RID_A, - USB_LINK_ACA_RID_B, - USB_LINK_ACA_RID_C_NM, - USB_LINK_ACA_RID_C_HS, - USB_LINK_ACA_RID_C_HS_CHIRP, - USB_LINK_HM_IDGND, - USB_LINK_RESERVED, - USB_LINK_NOT_VALID_LINK -}; - -struct ab8500_usb { - struct otg_transceiver otg; - struct device *dev; - int irq_num_id_rise; - int irq_num_id_fall; - int irq_num_vbus_rise; - int irq_num_vbus_fall; - int irq_num_link_status; - unsigned vbus_draw; - struct delayed_work dwork; - struct work_struct phy_dis_work; - unsigned long link_status_wait; - int rev; -}; - -static inline struct ab8500_usb *xceiv_to_ab(struct otg_transceiver *x) -{ - return container_of(x, struct ab8500_usb, otg); -} - -static void ab8500_usb_wd_workaround(struct ab8500_usb *ab) -{ - abx500_set_register_interruptible(ab->dev, - AB8500_SYS_CTRL2_BLOCK, - AB8500_MAIN_WD_CTRL_REG, - AB8500_BIT_WD_CTRL_ENABLE); - - udelay(AB8500_WD_KICK_DELAY_US); - - abx500_set_register_interruptible(ab->dev, - AB8500_SYS_CTRL2_BLOCK, - AB8500_MAIN_WD_CTRL_REG, - (AB8500_BIT_WD_CTRL_ENABLE - | AB8500_BIT_WD_CTRL_KICK)); - - if (ab->rev > 0x10) /* v1.1 v2.0 */ - udelay(AB8500_WD_V11_DISABLE_DELAY_US); - else /* v1.0 */ - msleep(AB8500_WD_V10_DISABLE_DELAY_MS); - - abx500_set_register_interruptible(ab->dev, - AB8500_SYS_CTRL2_BLOCK, - AB8500_MAIN_WD_CTRL_REG, - 0); -} - -static void ab8500_usb_phy_ctrl(struct ab8500_usb *ab, bool sel_host, - bool enable) -{ - u8 ctrl_reg; - abx500_get_register_interruptible(ab->dev, - AB8500_USB, - AB8500_USB_PHY_CTRL_REG, - &ctrl_reg); - if (sel_host) { - if (enable) - ctrl_reg |= AB8500_BIT_PHY_CTRL_HOST_EN; - else - ctrl_reg &= ~AB8500_BIT_PHY_CTRL_HOST_EN; - } else { - if (enable) - ctrl_reg |= AB8500_BIT_PHY_CTRL_DEVICE_EN; - else - ctrl_reg &= ~AB8500_BIT_PHY_CTRL_DEVICE_EN; - } - - abx500_set_register_interruptible(ab->dev, - AB8500_USB, - AB8500_USB_PHY_CTRL_REG, - ctrl_reg); - - /* Needed to enable the phy.*/ - if (enable) - ab8500_usb_wd_workaround(ab); -} - -#define ab8500_usb_host_phy_en(ab) ab8500_usb_phy_ctrl(ab, true, true) -#define ab8500_usb_host_phy_dis(ab) ab8500_usb_phy_ctrl(ab, true, false) -#define ab8500_usb_peri_phy_en(ab) ab8500_usb_phy_ctrl(ab, false, true) -#define ab8500_usb_peri_phy_dis(ab) ab8500_usb_phy_ctrl(ab, false, false) - -static int ab8500_usb_link_status_update(struct ab8500_usb *ab) -{ - u8 reg; - enum ab8500_usb_link_status lsts; - void *v = NULL; - enum usb_xceiv_events event; - - abx500_get_register_interruptible(ab->dev, - AB8500_USB, - AB8500_USB_LINE_STAT_REG, - ®); - - lsts = (reg >> 3) & 0x0F; - - switch (lsts) { - case USB_LINK_NOT_CONFIGURED: - case USB_LINK_RESERVED: - case USB_LINK_NOT_VALID_LINK: - /* TODO: Disable regulators. */ - ab8500_usb_host_phy_dis(ab); - ab8500_usb_peri_phy_dis(ab); - ab->otg.state = OTG_STATE_B_IDLE; - ab->otg.default_a = false; - ab->vbus_draw = 0; - event = USB_EVENT_NONE; - break; - - case USB_LINK_STD_HOST_NC: - case USB_LINK_STD_HOST_C_NS: - case USB_LINK_STD_HOST_C_S: - case USB_LINK_HOST_CHG_NM: - case USB_LINK_HOST_CHG_HS: - case USB_LINK_HOST_CHG_HS_CHIRP: - if (ab->otg.gadget) { - /* TODO: Enable regulators. */ - ab8500_usb_peri_phy_en(ab); - v = ab->otg.gadget; - } - event = USB_EVENT_VBUS; - break; - - case USB_LINK_HM_IDGND: - if (ab->otg.host) { - /* TODO: Enable regulators. */ - ab8500_usb_host_phy_en(ab); - v = ab->otg.host; - } - ab->otg.state = OTG_STATE_A_IDLE; - ab->otg.default_a = true; - event = USB_EVENT_ID; - break; - - case USB_LINK_ACA_RID_A: - case USB_LINK_ACA_RID_B: - /* TODO */ - case USB_LINK_ACA_RID_C_NM: - case USB_LINK_ACA_RID_C_HS: - case USB_LINK_ACA_RID_C_HS_CHIRP: - case USB_LINK_DEDICATED_CHG: - /* TODO: vbus_draw */ - event = USB_EVENT_CHARGER; - break; - } - - atomic_notifier_call_chain(&ab->otg.notifier, event, v); - - return 0; -} - -static void ab8500_usb_delayed_work(struct work_struct *work) -{ - struct ab8500_usb *ab = container_of(work, struct ab8500_usb, - dwork.work); - - ab8500_usb_link_status_update(ab); -} - -static irqreturn_t ab8500_usb_v1x_common_irq(int irq, void *data) -{ - struct ab8500_usb *ab = (struct ab8500_usb *) data; - - /* Wait for link status to become stable. */ - schedule_delayed_work(&ab->dwork, ab->link_status_wait); - - return IRQ_HANDLED; -} - -static irqreturn_t ab8500_usb_v1x_vbus_fall_irq(int irq, void *data) -{ - struct ab8500_usb *ab = (struct ab8500_usb *) data; - - /* Link status will not be updated till phy is disabled. */ - ab8500_usb_peri_phy_dis(ab); - - /* Wait for link status to become stable. */ - schedule_delayed_work(&ab->dwork, ab->link_status_wait); - - return IRQ_HANDLED; -} - -static irqreturn_t ab8500_usb_v20_irq(int irq, void *data) -{ - struct ab8500_usb *ab = (struct ab8500_usb *) data; - - ab8500_usb_link_status_update(ab); - - return IRQ_HANDLED; -} - -static void ab8500_usb_phy_disable_work(struct work_struct *work) -{ - struct ab8500_usb *ab = container_of(work, struct ab8500_usb, - phy_dis_work); - - if (!ab->otg.host) - ab8500_usb_host_phy_dis(ab); - - if (!ab->otg.gadget) - ab8500_usb_peri_phy_dis(ab); -} - -static int ab8500_usb_set_power(struct otg_transceiver *otg, unsigned mA) -{ - struct ab8500_usb *ab; - - if (!otg) - return -ENODEV; - - ab = xceiv_to_ab(otg); - - ab->vbus_draw = mA; - - if (mA) - atomic_notifier_call_chain(&ab->otg.notifier, - USB_EVENT_ENUMERATED, ab->otg.gadget); - return 0; -} - -/* TODO: Implement some way for charging or other drivers to read - * ab->vbus_draw. - */ - -static int ab8500_usb_set_suspend(struct otg_transceiver *x, int suspend) -{ - /* TODO */ - return 0; -} - -static int ab8500_usb_set_peripheral(struct otg_transceiver *otg, - struct usb_gadget *gadget) -{ - struct ab8500_usb *ab; - - if (!otg) - return -ENODEV; - - ab = xceiv_to_ab(otg); - - /* Some drivers call this function in atomic context. - * Do not update ab8500 registers directly till this - * is fixed. - */ - - if (!gadget) { - /* TODO: Disable regulators. */ - ab->otg.gadget = NULL; - schedule_work(&ab->phy_dis_work); - } else { - ab->otg.gadget = gadget; - ab->otg.state = OTG_STATE_B_IDLE; - - /* Phy will not be enabled if cable is already - * plugged-in. Schedule to enable phy. - * Use same delay to avoid any race condition. - */ - schedule_delayed_work(&ab->dwork, ab->link_status_wait); - } - - return 0; -} - -static int ab8500_usb_set_host(struct otg_transceiver *otg, - struct usb_bus *host) -{ - struct ab8500_usb *ab; - - if (!otg) - return -ENODEV; - - ab = xceiv_to_ab(otg); - - /* Some drivers call this function in atomic context. - * Do not update ab8500 registers directly till this - * is fixed. - */ - - if (!host) { - /* TODO: Disable regulators. */ - ab->otg.host = NULL; - schedule_work(&ab->phy_dis_work); - } else { - ab->otg.host = host; - /* Phy will not be enabled if cable is already - * plugged-in. Schedule to enable phy. - * Use same delay to avoid any race condition. - */ - schedule_delayed_work(&ab->dwork, ab->link_status_wait); - } - - return 0; -} - -static void ab8500_usb_irq_free(struct ab8500_usb *ab) -{ - if (ab->rev < 0x20) { - free_irq(ab->irq_num_id_rise, ab); - free_irq(ab->irq_num_id_fall, ab); - free_irq(ab->irq_num_vbus_rise, ab); - free_irq(ab->irq_num_vbus_fall, ab); - } else { - free_irq(ab->irq_num_link_status, ab); - } -} - -static int ab8500_usb_v1x_res_setup(struct platform_device *pdev, - struct ab8500_usb *ab) -{ - int err; - - ab->irq_num_id_rise = platform_get_irq_byname(pdev, "ID_WAKEUP_R"); - if (ab->irq_num_id_rise < 0) { - dev_err(&pdev->dev, "ID rise irq not found\n"); - return ab->irq_num_id_rise; - } - err = request_threaded_irq(ab->irq_num_id_rise, NULL, - ab8500_usb_v1x_common_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-id-rise", ab); - if (err < 0) { - dev_err(ab->dev, "request_irq failed for ID rise irq\n"); - goto fail0; - } - - ab->irq_num_id_fall = platform_get_irq_byname(pdev, "ID_WAKEUP_F"); - if (ab->irq_num_id_fall < 0) { - dev_err(&pdev->dev, "ID fall irq not found\n"); - return ab->irq_num_id_fall; - } - err = request_threaded_irq(ab->irq_num_id_fall, NULL, - ab8500_usb_v1x_common_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-id-fall", ab); - if (err < 0) { - dev_err(ab->dev, "request_irq failed for ID fall irq\n"); - goto fail1; - } - - ab->irq_num_vbus_rise = platform_get_irq_byname(pdev, "VBUS_DET_R"); - if (ab->irq_num_vbus_rise < 0) { - dev_err(&pdev->dev, "VBUS rise irq not found\n"); - return ab->irq_num_vbus_rise; - } - err = request_threaded_irq(ab->irq_num_vbus_rise, NULL, - ab8500_usb_v1x_common_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-vbus-rise", ab); - if (err < 0) { - dev_err(ab->dev, "request_irq failed for Vbus rise irq\n"); - goto fail2; - } - - ab->irq_num_vbus_fall = platform_get_irq_byname(pdev, "VBUS_DET_F"); - if (ab->irq_num_vbus_fall < 0) { - dev_err(&pdev->dev, "VBUS fall irq not found\n"); - return ab->irq_num_vbus_fall; - } - err = request_threaded_irq(ab->irq_num_vbus_fall, NULL, - ab8500_usb_v1x_vbus_fall_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-vbus-fall", ab); - if (err < 0) { - dev_err(ab->dev, "request_irq failed for Vbus fall irq\n"); - goto fail3; - } - - return 0; -fail3: - free_irq(ab->irq_num_vbus_rise, ab); -fail2: - free_irq(ab->irq_num_id_fall, ab); -fail1: - free_irq(ab->irq_num_id_rise, ab); -fail0: - return err; -} - -static int ab8500_usb_v2_res_setup(struct platform_device *pdev, - struct ab8500_usb *ab) -{ - int err; - - ab->irq_num_link_status = platform_get_irq_byname(pdev, - "USB_LINK_STATUS"); - if (ab->irq_num_link_status < 0) { - dev_err(&pdev->dev, "Link status irq not found\n"); - return ab->irq_num_link_status; - } - - err = request_threaded_irq(ab->irq_num_link_status, NULL, - ab8500_usb_v20_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-link-status", ab); - if (err < 0) { - dev_err(ab->dev, - "request_irq failed for link status irq\n"); - return err; - } - - return 0; -} - -static int __devinit ab8500_usb_probe(struct platform_device *pdev) -{ - struct ab8500_usb *ab; - int err; - int rev; - - rev = abx500_get_chip_id(&pdev->dev); - if (rev < 0) { - dev_err(&pdev->dev, "Chip id read failed\n"); - return rev; - } else if (rev < 0x10) { - dev_err(&pdev->dev, "Unsupported AB8500 chip\n"); - return -ENODEV; - } - - ab = kzalloc(sizeof *ab, GFP_KERNEL); - if (!ab) - return -ENOMEM; - - ab->dev = &pdev->dev; - ab->rev = rev; - ab->otg.dev = ab->dev; - ab->otg.label = "ab8500"; - ab->otg.state = OTG_STATE_UNDEFINED; - ab->otg.set_host = ab8500_usb_set_host; - ab->otg.set_peripheral = ab8500_usb_set_peripheral; - ab->otg.set_suspend = ab8500_usb_set_suspend; - ab->otg.set_power = ab8500_usb_set_power; - - platform_set_drvdata(pdev, ab); - - ATOMIC_INIT_NOTIFIER_HEAD(&ab->otg.notifier); - - /* v1: Wait for link status to become stable. - * all: Updates form set_host and set_peripheral as they are atomic. - */ - INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work); - - /* all: Disable phy when called from set_host and set_peripheral */ - INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work); - - if (ab->rev < 0x20) { - err = ab8500_usb_v1x_res_setup(pdev, ab); - ab->link_status_wait = AB8500_V1x_LINK_STAT_WAIT; - } else { - err = ab8500_usb_v2_res_setup(pdev, ab); - } - - if (err < 0) - goto fail0; - - err = otg_set_transceiver(&ab->otg); - if (err) { - dev_err(&pdev->dev, "Can't register transceiver\n"); - goto fail1; - } - - dev_info(&pdev->dev, "AB8500 usb driver initialized\n"); - - return 0; -fail1: - ab8500_usb_irq_free(ab); -fail0: - kfree(ab); - return err; -} - -static int __devexit ab8500_usb_remove(struct platform_device *pdev) -{ - struct ab8500_usb *ab = platform_get_drvdata(pdev); - - ab8500_usb_irq_free(ab); - - cancel_delayed_work_sync(&ab->dwork); - - cancel_work_sync(&ab->phy_dis_work); - - otg_set_transceiver(NULL); - - ab8500_usb_host_phy_dis(ab); - ab8500_usb_peri_phy_dis(ab); - - platform_set_drvdata(pdev, NULL); - - kfree(ab); - - return 0; -} - -static struct platform_driver ab8500_usb_driver = { - .probe = ab8500_usb_probe, - .remove = __devexit_p(ab8500_usb_remove), - .driver = { - .name = "ab8500-usb", - .owner = THIS_MODULE, - }, -}; - -static int __init ab8500_usb_init(void) -{ - return platform_driver_register(&ab8500_usb_driver); -} -subsys_initcall(ab8500_usb_init); - -static void __exit ab8500_usb_exit(void) -{ - platform_driver_unregister(&ab8500_usb_driver); -} -module_exit(ab8500_usb_exit); - -MODULE_ALIAS("platform:ab8500_usb"); -MODULE_AUTHOR("ST-Ericsson AB"); -MODULE_DESCRIPTION("AB8500 usb transceiver driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c deleted file mode 100644 index 221c44444ec..00000000000 --- a/drivers/usb/otg/gpio_vbus.c +++ /dev/null @@ -1,356 +0,0 @@ -/* - * gpio-vbus.c - simple GPIO VBUS sensing driver for B peripheral devices - * - * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/usb.h> -#include <linux/workqueue.h> - -#include <linux/regulator/consumer.h> - -#include <linux/usb/gadget.h> -#include <linux/usb/gpio_vbus.h> -#include <linux/usb/otg.h> - - -/* - * A simple GPIO VBUS sensing driver for B peripheral only devices - * with internal transceivers. It can control a D+ pullup GPIO and - * a regulator to limit the current drawn from VBUS. - * - * Needs to be loaded before the UDC driver that will use it. - */ -struct gpio_vbus_data { - struct otg_transceiver otg; - struct device *dev; - struct regulator *vbus_draw; - int vbus_draw_enabled; - unsigned mA; - struct work_struct work; -}; - - -/* - * This driver relies on "both edges" triggering. VBUS has 100 msec to - * stabilize, so the peripheral controller driver may need to cope with - * some bouncing due to current surges (e.g. charging local capacitance) - * and contact chatter. - * - * REVISIT in desperate straits, toggling between rising and falling - * edges might be workable. - */ -#define VBUS_IRQ_FLAGS \ - ( IRQF_SAMPLE_RANDOM | IRQF_SHARED \ - | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING ) - - -/* interface to regulator framework */ -static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA) -{ - struct regulator *vbus_draw = gpio_vbus->vbus_draw; - int enabled; - - if (!vbus_draw) - return; - - enabled = gpio_vbus->vbus_draw_enabled; - if (mA) { - regulator_set_current_limit(vbus_draw, 0, 1000 * mA); - if (!enabled) { - regulator_enable(vbus_draw); - gpio_vbus->vbus_draw_enabled = 1; - } - } else { - if (enabled) { - regulator_disable(vbus_draw); - gpio_vbus->vbus_draw_enabled = 0; - } - } - gpio_vbus->mA = mA; -} - -static int is_vbus_powered(struct gpio_vbus_mach_info *pdata) -{ - int vbus; - - vbus = gpio_get_value(pdata->gpio_vbus); - if (pdata->gpio_vbus_inverted) - vbus = !vbus; - - return vbus; -} - -static void gpio_vbus_work(struct work_struct *work) -{ - struct gpio_vbus_data *gpio_vbus = - container_of(work, struct gpio_vbus_data, work); - struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data; - int gpio; - - if (!gpio_vbus->otg.gadget) - return; - - /* Peripheral controllers which manage the pullup themselves won't have - * gpio_pullup configured here. If it's configured here, we'll do what - * isp1301_omap::b_peripheral() does and enable the pullup here... although - * that may complicate usb_gadget_{,dis}connect() support. - */ - gpio = pdata->gpio_pullup; - if (is_vbus_powered(pdata)) { - gpio_vbus->otg.state = OTG_STATE_B_PERIPHERAL; - usb_gadget_vbus_connect(gpio_vbus->otg.gadget); - - /* drawing a "unit load" is *always* OK, except for OTG */ - set_vbus_draw(gpio_vbus, 100); - - /* optionally enable D+ pullup */ - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, !pdata->gpio_pullup_inverted); - } else { - /* optionally disable D+ pullup */ - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, pdata->gpio_pullup_inverted); - - set_vbus_draw(gpio_vbus, 0); - - usb_gadget_vbus_disconnect(gpio_vbus->otg.gadget); - gpio_vbus->otg.state = OTG_STATE_B_IDLE; - } -} - -/* VBUS change IRQ handler */ -static irqreturn_t gpio_vbus_irq(int irq, void *data) -{ - struct platform_device *pdev = data; - struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data; - struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); - - dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n", - is_vbus_powered(pdata) ? "supplied" : "inactive", - gpio_vbus->otg.gadget ? gpio_vbus->otg.gadget->name : "none"); - - if (gpio_vbus->otg.gadget) - schedule_work(&gpio_vbus->work); - - return IRQ_HANDLED; -} - -/* OTG transceiver interface */ - -/* bind/unbind the peripheral controller */ -static int gpio_vbus_set_peripheral(struct otg_transceiver *otg, - struct usb_gadget *gadget) -{ - struct gpio_vbus_data *gpio_vbus; - struct gpio_vbus_mach_info *pdata; - struct platform_device *pdev; - int gpio, irq; - - gpio_vbus = container_of(otg, struct gpio_vbus_data, otg); - pdev = to_platform_device(gpio_vbus->dev); - pdata = gpio_vbus->dev->platform_data; - irq = gpio_to_irq(pdata->gpio_vbus); - gpio = pdata->gpio_pullup; - - if (!gadget) { - dev_dbg(&pdev->dev, "unregistering gadget '%s'\n", - otg->gadget->name); - - /* optionally disable D+ pullup */ - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, pdata->gpio_pullup_inverted); - - set_vbus_draw(gpio_vbus, 0); - - usb_gadget_vbus_disconnect(otg->gadget); - otg->state = OTG_STATE_UNDEFINED; - - otg->gadget = NULL; - return 0; - } - - otg->gadget = gadget; - dev_dbg(&pdev->dev, "registered gadget '%s'\n", gadget->name); - - /* initialize connection state */ - gpio_vbus_irq(irq, pdev); - return 0; -} - -/* effective for B devices, ignored for A-peripheral */ -static int gpio_vbus_set_power(struct otg_transceiver *otg, unsigned mA) -{ - struct gpio_vbus_data *gpio_vbus; - - gpio_vbus = container_of(otg, struct gpio_vbus_data, otg); - - if (otg->state == OTG_STATE_B_PERIPHERAL) - set_vbus_draw(gpio_vbus, mA); - return 0; -} - -/* for non-OTG B devices: set/clear transceiver suspend mode */ -static int gpio_vbus_set_suspend(struct otg_transceiver *otg, int suspend) -{ - struct gpio_vbus_data *gpio_vbus; - - gpio_vbus = container_of(otg, struct gpio_vbus_data, otg); - - /* draw max 0 mA from vbus in suspend mode; or the previously - * recorded amount of current if not suspended - * - * NOTE: high powered configs (mA > 100) may draw up to 2.5 mA - * if they're wake-enabled ... we don't handle that yet. - */ - return gpio_vbus_set_power(otg, suspend ? 0 : gpio_vbus->mA); -} - -/* platform driver interface */ - -static int __init gpio_vbus_probe(struct platform_device *pdev) -{ - struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data; - struct gpio_vbus_data *gpio_vbus; - struct resource *res; - int err, gpio, irq; - - if (!pdata || !gpio_is_valid(pdata->gpio_vbus)) - return -EINVAL; - gpio = pdata->gpio_vbus; - - gpio_vbus = kzalloc(sizeof(struct gpio_vbus_data), GFP_KERNEL); - if (!gpio_vbus) - return -ENOMEM; - - platform_set_drvdata(pdev, gpio_vbus); - gpio_vbus->dev = &pdev->dev; - gpio_vbus->otg.label = "gpio-vbus"; - gpio_vbus->otg.state = OTG_STATE_UNDEFINED; - gpio_vbus->otg.set_peripheral = gpio_vbus_set_peripheral; - gpio_vbus->otg.set_power = gpio_vbus_set_power; - gpio_vbus->otg.set_suspend = gpio_vbus_set_suspend; - - err = gpio_request(gpio, "vbus_detect"); - if (err) { - dev_err(&pdev->dev, "can't request vbus gpio %d, err: %d\n", - gpio, err); - goto err_gpio; - } - gpio_direction_input(gpio); - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (res) { - irq = res->start; - res->flags &= IRQF_TRIGGER_MASK; - res->flags |= IRQF_SAMPLE_RANDOM | IRQF_SHARED; - } else - irq = gpio_to_irq(gpio); - - /* if data line pullup is in use, initialize it to "not pulling up" */ - gpio = pdata->gpio_pullup; - if (gpio_is_valid(gpio)) { - err = gpio_request(gpio, "udc_pullup"); - if (err) { - dev_err(&pdev->dev, - "can't request pullup gpio %d, err: %d\n", - gpio, err); - gpio_free(pdata->gpio_vbus); - goto err_gpio; - } - gpio_direction_output(gpio, pdata->gpio_pullup_inverted); - } - - err = request_irq(irq, gpio_vbus_irq, VBUS_IRQ_FLAGS, - "vbus_detect", pdev); - if (err) { - dev_err(&pdev->dev, "can't request irq %i, err: %d\n", - irq, err); - goto err_irq; - } - INIT_WORK(&gpio_vbus->work, gpio_vbus_work); - - /* only active when a gadget is registered */ - err = otg_set_transceiver(&gpio_vbus->otg); - if (err) { - dev_err(&pdev->dev, "can't register transceiver, err: %d\n", - err); - goto err_otg; - } - - gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw"); - if (IS_ERR(gpio_vbus->vbus_draw)) { - dev_dbg(&pdev->dev, "can't get vbus_draw regulator, err: %ld\n", - PTR_ERR(gpio_vbus->vbus_draw)); - gpio_vbus->vbus_draw = NULL; - } - - return 0; -err_otg: - free_irq(irq, &pdev->dev); -err_irq: - if (gpio_is_valid(pdata->gpio_pullup)) - gpio_free(pdata->gpio_pullup); - gpio_free(pdata->gpio_vbus); -err_gpio: - platform_set_drvdata(pdev, NULL); - kfree(gpio_vbus); - return err; -} - -static int __exit gpio_vbus_remove(struct platform_device *pdev) -{ - struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); - struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data; - int gpio = pdata->gpio_vbus; - - regulator_put(gpio_vbus->vbus_draw); - - otg_set_transceiver(NULL); - - free_irq(gpio_to_irq(gpio), &pdev->dev); - if (gpio_is_valid(pdata->gpio_pullup)) - gpio_free(pdata->gpio_pullup); - gpio_free(gpio); - platform_set_drvdata(pdev, NULL); - kfree(gpio_vbus); - - return 0; -} - -/* NOTE: the gpio-vbus device may *NOT* be hotplugged */ - -MODULE_ALIAS("platform:gpio-vbus"); - -static struct platform_driver gpio_vbus_driver = { - .driver = { - .name = "gpio-vbus", - .owner = THIS_MODULE, - }, - .remove = __exit_p(gpio_vbus_remove), -}; - -static int __init gpio_vbus_init(void) -{ - return platform_driver_probe(&gpio_vbus_driver, gpio_vbus_probe); -} -module_init(gpio_vbus_init); - -static void __exit gpio_vbus_exit(void) -{ - platform_driver_unregister(&gpio_vbus_driver); -} -module_exit(gpio_vbus_exit); - -MODULE_DESCRIPTION("simple GPIO controlled OTG transceiver driver"); -MODULE_AUTHOR("Philipp Zabel"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c deleted file mode 100644 index e25700f44b6..00000000000 --- a/drivers/usb/otg/isp1301_omap.c +++ /dev/null @@ -1,1666 +0,0 @@ -/* - * isp1301_omap - ISP 1301 USB transceiver, talking to OMAP OTG controller - * - * Copyright (C) 2004 Texas Instruments - * Copyright (C) 2004 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> -#include <linux/usb.h> -#include <linux/usb/otg.h> -#include <linux/i2c.h> -#include <linux/workqueue.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> - -#include <plat/usb.h> -#include <plat/mux.h> - - -#ifndef DEBUG -#undef VERBOSE -#endif - - -#define DRIVER_VERSION "24 August 2004" -#define DRIVER_NAME (isp1301_driver.driver.name) - -MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver"); -MODULE_LICENSE("GPL"); - -struct isp1301 { - struct otg_transceiver otg; - struct i2c_client *client; - void (*i2c_release)(struct device *dev); - - int irq_type; - - u32 last_otg_ctrl; - unsigned working:1; - - struct timer_list timer; - - /* use keventd context to change the state for us */ - struct work_struct work; - - unsigned long todo; -# define WORK_UPDATE_ISP 0 /* update ISP from OTG */ -# define WORK_UPDATE_OTG 1 /* update OTG from ISP */ -# define WORK_HOST_RESUME 4 /* resume host */ -# define WORK_TIMER 6 /* timer fired */ -# define WORK_STOP 7 /* don't resubmit */ -}; - - -/* bits in OTG_CTRL */ - -#define OTG_XCEIV_OUTPUTS \ - (OTG_ASESSVLD|OTG_BSESSEND|OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID) -#define OTG_XCEIV_INPUTS \ - (OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID) -#define OTG_CTRL_BITS \ - (OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|OTG_B_HNPEN|OTG_BUSDROP) - /* and OTG_PULLUP is sometimes written */ - -#define OTG_CTRL_MASK (OTG_DRIVER_SEL| \ - OTG_XCEIV_OUTPUTS|OTG_XCEIV_INPUTS| \ - OTG_CTRL_BITS) - - -/*-------------------------------------------------------------------------*/ - -/* board-specific PM hooks */ - -#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3) - -#if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE) - -#include <linux/i2c/tps65010.h> - -#else - -static inline int tps65010_set_vbus_draw(unsigned mA) -{ - pr_debug("tps65010: draw %d mA (STUB)\n", mA); - return 0; -} - -#endif - -static void enable_vbus_draw(struct isp1301 *isp, unsigned mA) -{ - int status = tps65010_set_vbus_draw(mA); - if (status < 0) - pr_debug(" VBUS %d mA error %d\n", mA, status); -} - -#else - -static void enable_vbus_draw(struct isp1301 *isp, unsigned mA) -{ - /* H4 controls this by DIP switch S2.4; no soft control. - * ON means the charger is always enabled. Leave it OFF - * unless the OTG port is used only in B-peripheral mode. - */ -} - -#endif - -static void enable_vbus_source(struct isp1301 *isp) -{ - /* this board won't supply more than 8mA vbus power. - * some boards can switch a 100ma "unit load" (or more). - */ -} - - -/* products will deliver OTG messages with LEDs, GUI, etc */ -static inline void notresponding(struct isp1301 *isp) -{ - printk(KERN_NOTICE "OTG device not responding.\n"); -} - - -/*-------------------------------------------------------------------------*/ - -static struct i2c_driver isp1301_driver; - -/* smbus apis are used for portability */ - -static inline u8 -isp1301_get_u8(struct isp1301 *isp, u8 reg) -{ - return i2c_smbus_read_byte_data(isp->client, reg + 0); -} - -static inline int -isp1301_get_u16(struct isp1301 *isp, u8 reg) -{ - return i2c_smbus_read_word_data(isp->client, reg); -} - -static inline int -isp1301_set_bits(struct isp1301 *isp, u8 reg, u8 bits) -{ - return i2c_smbus_write_byte_data(isp->client, reg + 0, bits); -} - -static inline int -isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits) -{ - return i2c_smbus_write_byte_data(isp->client, reg + 1, bits); -} - -/*-------------------------------------------------------------------------*/ - -/* identification */ -#define ISP1301_VENDOR_ID 0x00 /* u16 read */ -#define ISP1301_PRODUCT_ID 0x02 /* u16 read */ -#define ISP1301_BCD_DEVICE 0x14 /* u16 read */ - -#define I2C_VENDOR_ID_PHILIPS 0x04cc -#define I2C_PRODUCT_ID_PHILIPS_1301 0x1301 - -/* operational registers */ -#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */ -# define MC1_SPEED (1 << 0) -# define MC1_SUSPEND (1 << 1) -# define MC1_DAT_SE0 (1 << 2) -# define MC1_TRANSPARENT (1 << 3) -# define MC1_BDIS_ACON_EN (1 << 4) -# define MC1_OE_INT_EN (1 << 5) -# define MC1_UART_EN (1 << 6) -# define MC1_MASK 0x7f -#define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */ -# define MC2_GLOBAL_PWR_DN (1 << 0) -# define MC2_SPD_SUSP_CTRL (1 << 1) -# define MC2_BI_DI (1 << 2) -# define MC2_TRANSP_BDIR0 (1 << 3) -# define MC2_TRANSP_BDIR1 (1 << 4) -# define MC2_AUDIO_EN (1 << 5) -# define MC2_PSW_EN (1 << 6) -# define MC2_EN2V7 (1 << 7) -#define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */ -# define OTG1_DP_PULLUP (1 << 0) -# define OTG1_DM_PULLUP (1 << 1) -# define OTG1_DP_PULLDOWN (1 << 2) -# define OTG1_DM_PULLDOWN (1 << 3) -# define OTG1_ID_PULLDOWN (1 << 4) -# define OTG1_VBUS_DRV (1 << 5) -# define OTG1_VBUS_DISCHRG (1 << 6) -# define OTG1_VBUS_CHRG (1 << 7) -#define ISP1301_OTG_STATUS 0x10 /* u8 readonly */ -# define OTG_B_SESS_END (1 << 6) -# define OTG_B_SESS_VLD (1 << 7) - -#define ISP1301_INTERRUPT_SOURCE 0x08 /* u8 read */ -#define ISP1301_INTERRUPT_LATCH 0x0A /* u8 read, set, +1 clear */ - -#define ISP1301_INTERRUPT_FALLING 0x0C /* u8 read, set, +1 clear */ -#define ISP1301_INTERRUPT_RISING 0x0E /* u8 read, set, +1 clear */ - -/* same bitfields in all interrupt registers */ -# define INTR_VBUS_VLD (1 << 0) -# define INTR_SESS_VLD (1 << 1) -# define INTR_DP_HI (1 << 2) -# define INTR_ID_GND (1 << 3) -# define INTR_DM_HI (1 << 4) -# define INTR_ID_FLOAT (1 << 5) -# define INTR_BDIS_ACON (1 << 6) -# define INTR_CR_INT (1 << 7) - -/*-------------------------------------------------------------------------*/ - -static const char *state_string(enum usb_otg_state state) -{ - switch (state) { - case OTG_STATE_A_IDLE: return "a_idle"; - case OTG_STATE_A_WAIT_VRISE: return "a_wait_vrise"; - case OTG_STATE_A_WAIT_BCON: return "a_wait_bcon"; - case OTG_STATE_A_HOST: return "a_host"; - case OTG_STATE_A_SUSPEND: return "a_suspend"; - case OTG_STATE_A_PERIPHERAL: return "a_peripheral"; - case OTG_STATE_A_WAIT_VFALL: return "a_wait_vfall"; - case OTG_STATE_A_VBUS_ERR: return "a_vbus_err"; - case OTG_STATE_B_IDLE: return "b_idle"; - case OTG_STATE_B_SRP_INIT: return "b_srp_init"; - case OTG_STATE_B_PERIPHERAL: return "b_peripheral"; - case OTG_STATE_B_WAIT_ACON: return "b_wait_acon"; - case OTG_STATE_B_HOST: return "b_host"; - default: return "UNDEFINED"; - } -} - -static inline const char *state_name(struct isp1301 *isp) -{ - return state_string(isp->otg.state); -} - -/*-------------------------------------------------------------------------*/ - -/* NOTE: some of this ISP1301 setup is specific to H2 boards; - * not everything is guarded by board-specific checks, or even using - * omap_usb_config data to deduce MC1_DAT_SE0 and MC2_BI_DI. - * - * ALSO: this currently doesn't use ISP1301 low-power modes - * while OTG is running. - */ - -static void power_down(struct isp1301 *isp) -{ - isp->otg.state = OTG_STATE_UNDEFINED; - - // isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN); - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND); - - isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_ID_PULLDOWN); - isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); -} - -static void power_up(struct isp1301 *isp) -{ - // isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN); - isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND); - - /* do this only when cpu is driving transceiver, - * so host won't see a low speed device... - */ - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); -} - -#define NO_HOST_SUSPEND - -static int host_suspend(struct isp1301 *isp) -{ -#ifdef NO_HOST_SUSPEND - return 0; -#else - struct device *dev; - - if (!isp->otg.host) - return -ENODEV; - - /* Currently ASSUMES only the OTG port matters; - * other ports could be active... - */ - dev = isp->otg.host->controller; - return dev->driver->suspend(dev, 3, 0); -#endif -} - -static int host_resume(struct isp1301 *isp) -{ -#ifdef NO_HOST_SUSPEND - return 0; -#else - struct device *dev; - - if (!isp->otg.host) - return -ENODEV; - - dev = isp->otg.host->controller; - return dev->driver->resume(dev, 0); -#endif -} - -static int gadget_suspend(struct isp1301 *isp) -{ - isp->otg.gadget->b_hnp_enable = 0; - isp->otg.gadget->a_hnp_support = 0; - isp->otg.gadget->a_alt_hnp_support = 0; - return usb_gadget_vbus_disconnect(isp->otg.gadget); -} - -/*-------------------------------------------------------------------------*/ - -#define TIMER_MINUTES 10 -#define TIMER_JIFFIES (TIMER_MINUTES * 60 * HZ) - -/* Almost all our I2C messaging comes from a work queue's task context. - * NOTE: guaranteeing certain response times might mean we shouldn't - * share keventd's work queue; a realtime task might be safest. - */ -static void isp1301_defer_work(struct isp1301 *isp, int work) -{ - int status; - - if (isp && !test_and_set_bit(work, &isp->todo)) { - (void) get_device(&isp->client->dev); - status = schedule_work(&isp->work); - if (!status && !isp->working) - dev_vdbg(&isp->client->dev, - "work item %d may be lost\n", work); - } -} - -/* called from irq handlers */ -static void a_idle(struct isp1301 *isp, const char *tag) -{ - u32 l; - - if (isp->otg.state == OTG_STATE_A_IDLE) - return; - - isp->otg.default_a = 1; - if (isp->otg.host) { - isp->otg.host->is_b_host = 0; - host_suspend(isp); - } - if (isp->otg.gadget) { - isp->otg.gadget->is_a_peripheral = 1; - gadget_suspend(isp); - } - isp->otg.state = OTG_STATE_A_IDLE; - l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS; - omap_writel(l, OTG_CTRL); - isp->last_otg_ctrl = l; - pr_debug(" --> %s/%s\n", state_name(isp), tag); -} - -/* called from irq handlers */ -static void b_idle(struct isp1301 *isp, const char *tag) -{ - u32 l; - - if (isp->otg.state == OTG_STATE_B_IDLE) - return; - - isp->otg.default_a = 0; - if (isp->otg.host) { - isp->otg.host->is_b_host = 1; - host_suspend(isp); - } - if (isp->otg.gadget) { - isp->otg.gadget->is_a_peripheral = 0; - gadget_suspend(isp); - } - isp->otg.state = OTG_STATE_B_IDLE; - l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS; - omap_writel(l, OTG_CTRL); - isp->last_otg_ctrl = l; - pr_debug(" --> %s/%s\n", state_name(isp), tag); -} - -static void -dump_regs(struct isp1301 *isp, const char *label) -{ -#ifdef DEBUG - u8 ctrl = isp1301_get_u8(isp, ISP1301_OTG_CONTROL_1); - u8 status = isp1301_get_u8(isp, ISP1301_OTG_STATUS); - u8 src = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE); - - pr_debug("otg: %06x, %s %s, otg/%02x stat/%02x.%02x\n", - omap_readl(OTG_CTRL), label, state_name(isp), - ctrl, status, src); - /* mode control and irq enables don't change much */ -#endif -} - -/*-------------------------------------------------------------------------*/ - -#ifdef CONFIG_USB_OTG - -/* - * The OMAP OTG controller handles most of the OTG state transitions. - * - * We translate isp1301 outputs (mostly voltage comparator status) into - * OTG inputs; OTG outputs (mostly pullup/pulldown controls) and HNP state - * flags into isp1301 inputs ... and infer state transitions. - */ - -#ifdef VERBOSE - -static void check_state(struct isp1301 *isp, const char *tag) -{ - enum usb_otg_state state = OTG_STATE_UNDEFINED; - u8 fsm = omap_readw(OTG_TEST) & 0x0ff; - unsigned extra = 0; - - switch (fsm) { - - /* default-b */ - case 0x0: - state = OTG_STATE_B_IDLE; - break; - case 0x3: - case 0x7: - extra = 1; - case 0x1: - state = OTG_STATE_B_PERIPHERAL; - break; - case 0x11: - state = OTG_STATE_B_SRP_INIT; - break; - - /* extra dual-role default-b states */ - case 0x12: - case 0x13: - case 0x16: - extra = 1; - case 0x17: - state = OTG_STATE_B_WAIT_ACON; - break; - case 0x34: - state = OTG_STATE_B_HOST; - break; - - /* default-a */ - case 0x36: - state = OTG_STATE_A_IDLE; - break; - case 0x3c: - state = OTG_STATE_A_WAIT_VFALL; - break; - case 0x7d: - state = OTG_STATE_A_VBUS_ERR; - break; - case 0x9e: - case 0x9f: - extra = 1; - case 0x89: - state = OTG_STATE_A_PERIPHERAL; - break; - case 0xb7: - state = OTG_STATE_A_WAIT_VRISE; - break; - case 0xb8: - state = OTG_STATE_A_WAIT_BCON; - break; - case 0xb9: - state = OTG_STATE_A_HOST; - break; - case 0xba: - state = OTG_STATE_A_SUSPEND; - break; - default: - break; - } - if (isp->otg.state == state && !extra) - return; - pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag, - state_string(state), fsm, state_name(isp), - omap_readl(OTG_CTRL)); -} - -#else - -static inline void check_state(struct isp1301 *isp, const char *tag) { } - -#endif - -/* outputs from ISP1301_INTERRUPT_SOURCE */ -static void update_otg1(struct isp1301 *isp, u8 int_src) -{ - u32 otg_ctrl; - - otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; - otg_ctrl &= ~OTG_XCEIV_INPUTS; - otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD); - - if (int_src & INTR_SESS_VLD) - otg_ctrl |= OTG_ASESSVLD; - else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) { - a_idle(isp, "vfall"); - otg_ctrl &= ~OTG_CTRL_BITS; - } - if (int_src & INTR_VBUS_VLD) - otg_ctrl |= OTG_VBUSVLD; - if (int_src & INTR_ID_GND) { /* default-A */ - if (isp->otg.state == OTG_STATE_B_IDLE - || isp->otg.state == OTG_STATE_UNDEFINED) { - a_idle(isp, "init"); - return; - } - } else { /* default-B */ - otg_ctrl |= OTG_ID; - if (isp->otg.state == OTG_STATE_A_IDLE - || isp->otg.state == OTG_STATE_UNDEFINED) { - b_idle(isp, "init"); - return; - } - } - omap_writel(otg_ctrl, OTG_CTRL); -} - -/* outputs from ISP1301_OTG_STATUS */ -static void update_otg2(struct isp1301 *isp, u8 otg_status) -{ - u32 otg_ctrl; - - otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; - otg_ctrl &= ~OTG_XCEIV_INPUTS; - otg_ctrl &= ~(OTG_BSESSVLD | OTG_BSESSEND); - if (otg_status & OTG_B_SESS_VLD) - otg_ctrl |= OTG_BSESSVLD; - else if (otg_status & OTG_B_SESS_END) - otg_ctrl |= OTG_BSESSEND; - omap_writel(otg_ctrl, OTG_CTRL); -} - -/* inputs going to ISP1301 */ -static void otg_update_isp(struct isp1301 *isp) -{ - u32 otg_ctrl, otg_change; - u8 set = OTG1_DM_PULLDOWN, clr = OTG1_DM_PULLUP; - - otg_ctrl = omap_readl(OTG_CTRL); - otg_change = otg_ctrl ^ isp->last_otg_ctrl; - isp->last_otg_ctrl = otg_ctrl; - otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS; - - switch (isp->otg.state) { - case OTG_STATE_B_IDLE: - case OTG_STATE_B_PERIPHERAL: - case OTG_STATE_B_SRP_INIT: - if (!(otg_ctrl & OTG_PULLUP)) { - // if (otg_ctrl & OTG_B_HNPEN) { - if (isp->otg.gadget->b_hnp_enable) { - isp->otg.state = OTG_STATE_B_WAIT_ACON; - pr_debug(" --> b_wait_acon\n"); - } - goto pulldown; - } -pullup: - set |= OTG1_DP_PULLUP; - clr |= OTG1_DP_PULLDOWN; - break; - case OTG_STATE_A_SUSPEND: - case OTG_STATE_A_PERIPHERAL: - if (otg_ctrl & OTG_PULLUP) - goto pullup; - /* FALLTHROUGH */ - // case OTG_STATE_B_WAIT_ACON: - default: -pulldown: - set |= OTG1_DP_PULLDOWN; - clr |= OTG1_DP_PULLUP; - break; - } - -# define toggle(OTG,ISP) do { \ - if (otg_ctrl & OTG) set |= ISP; \ - else clr |= ISP; \ - } while (0) - - if (!(isp->otg.host)) - otg_ctrl &= ~OTG_DRV_VBUS; - - switch (isp->otg.state) { - case OTG_STATE_A_SUSPEND: - if (otg_ctrl & OTG_DRV_VBUS) { - set |= OTG1_VBUS_DRV; - break; - } - /* HNP failed for some reason (A_AIDL_BDIS timeout) */ - notresponding(isp); - - /* FALLTHROUGH */ - case OTG_STATE_A_VBUS_ERR: - isp->otg.state = OTG_STATE_A_WAIT_VFALL; - pr_debug(" --> a_wait_vfall\n"); - /* FALLTHROUGH */ - case OTG_STATE_A_WAIT_VFALL: - /* FIXME usbcore thinks port power is still on ... */ - clr |= OTG1_VBUS_DRV; - break; - case OTG_STATE_A_IDLE: - if (otg_ctrl & OTG_DRV_VBUS) { - isp->otg.state = OTG_STATE_A_WAIT_VRISE; - pr_debug(" --> a_wait_vrise\n"); - } - /* FALLTHROUGH */ - default: - toggle(OTG_DRV_VBUS, OTG1_VBUS_DRV); - } - - toggle(OTG_PU_VBUS, OTG1_VBUS_CHRG); - toggle(OTG_PD_VBUS, OTG1_VBUS_DISCHRG); - -# undef toggle - - isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, set); - isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, clr); - - /* HNP switch to host or peripheral; and SRP */ - if (otg_change & OTG_PULLUP) { - u32 l; - - switch (isp->otg.state) { - case OTG_STATE_B_IDLE: - if (clr & OTG1_DP_PULLUP) - break; - isp->otg.state = OTG_STATE_B_PERIPHERAL; - pr_debug(" --> b_peripheral\n"); - break; - case OTG_STATE_A_SUSPEND: - if (clr & OTG1_DP_PULLUP) - break; - isp->otg.state = OTG_STATE_A_PERIPHERAL; - pr_debug(" --> a_peripheral\n"); - break; - default: - break; - } - l = omap_readl(OTG_CTRL); - l |= OTG_PULLUP; - omap_writel(l, OTG_CTRL); - } - - check_state(isp, __func__); - dump_regs(isp, "otg->isp1301"); -} - -static irqreturn_t omap_otg_irq(int irq, void *_isp) -{ - u16 otg_irq = omap_readw(OTG_IRQ_SRC); - u32 otg_ctrl; - int ret = IRQ_NONE; - struct isp1301 *isp = _isp; - - /* update ISP1301 transciever from OTG controller */ - if (otg_irq & OPRT_CHG) { - omap_writew(OPRT_CHG, OTG_IRQ_SRC); - isp1301_defer_work(isp, WORK_UPDATE_ISP); - ret = IRQ_HANDLED; - - /* SRP to become b_peripheral failed */ - } else if (otg_irq & B_SRP_TMROUT) { - pr_debug("otg: B_SRP_TIMEOUT, %06x\n", omap_readl(OTG_CTRL)); - notresponding(isp); - - /* gadget drivers that care should monitor all kinds of - * remote wakeup (SRP, normal) using their own timer - * to give "check cable and A-device" messages. - */ - if (isp->otg.state == OTG_STATE_B_SRP_INIT) - b_idle(isp, "srp_timeout"); - - omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC); - ret = IRQ_HANDLED; - - /* HNP to become b_host failed */ - } else if (otg_irq & B_HNP_FAIL) { - pr_debug("otg: %s B_HNP_FAIL, %06x\n", - state_name(isp), omap_readl(OTG_CTRL)); - notresponding(isp); - - otg_ctrl = omap_readl(OTG_CTRL); - otg_ctrl |= OTG_BUSDROP; - otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; - omap_writel(otg_ctrl, OTG_CTRL); - - /* subset of b_peripheral()... */ - isp->otg.state = OTG_STATE_B_PERIPHERAL; - pr_debug(" --> b_peripheral\n"); - - omap_writew(B_HNP_FAIL, OTG_IRQ_SRC); - ret = IRQ_HANDLED; - - /* detect SRP from B-device ... */ - } else if (otg_irq & A_SRP_DETECT) { - pr_debug("otg: %s SRP_DETECT, %06x\n", - state_name(isp), omap_readl(OTG_CTRL)); - - isp1301_defer_work(isp, WORK_UPDATE_OTG); - switch (isp->otg.state) { - case OTG_STATE_A_IDLE: - if (!isp->otg.host) - break; - isp1301_defer_work(isp, WORK_HOST_RESUME); - otg_ctrl = omap_readl(OTG_CTRL); - otg_ctrl |= OTG_A_BUSREQ; - otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ) - & ~OTG_XCEIV_INPUTS - & OTG_CTRL_MASK; - omap_writel(otg_ctrl, OTG_CTRL); - break; - default: - break; - } - - omap_writew(A_SRP_DETECT, OTG_IRQ_SRC); - ret = IRQ_HANDLED; - - /* timer expired: T(a_wait_bcon) and maybe T(a_wait_vrise) - * we don't track them separately - */ - } else if (otg_irq & A_REQ_TMROUT) { - otg_ctrl = omap_readl(OTG_CTRL); - pr_info("otg: BCON_TMOUT from %s, %06x\n", - state_name(isp), otg_ctrl); - notresponding(isp); - - otg_ctrl |= OTG_BUSDROP; - otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; - omap_writel(otg_ctrl, OTG_CTRL); - isp->otg.state = OTG_STATE_A_WAIT_VFALL; - - omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC); - ret = IRQ_HANDLED; - - /* A-supplied voltage fell too low; overcurrent */ - } else if (otg_irq & A_VBUS_ERR) { - otg_ctrl = omap_readl(OTG_CTRL); - printk(KERN_ERR "otg: %s, VBUS_ERR %04x ctrl %06x\n", - state_name(isp), otg_irq, otg_ctrl); - - otg_ctrl |= OTG_BUSDROP; - otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; - omap_writel(otg_ctrl, OTG_CTRL); - isp->otg.state = OTG_STATE_A_VBUS_ERR; - - omap_writew(A_VBUS_ERR, OTG_IRQ_SRC); - ret = IRQ_HANDLED; - - /* switch driver; the transciever code activates it, - * ungating the udc clock or resuming OHCI. - */ - } else if (otg_irq & DRIVER_SWITCH) { - int kick = 0; - - otg_ctrl = omap_readl(OTG_CTRL); - printk(KERN_NOTICE "otg: %s, SWITCH to %s, ctrl %06x\n", - state_name(isp), - (otg_ctrl & OTG_DRIVER_SEL) - ? "gadget" : "host", - otg_ctrl); - isp1301_defer_work(isp, WORK_UPDATE_ISP); - - /* role is peripheral */ - if (otg_ctrl & OTG_DRIVER_SEL) { - switch (isp->otg.state) { - case OTG_STATE_A_IDLE: - b_idle(isp, __func__); - break; - default: - break; - } - isp1301_defer_work(isp, WORK_UPDATE_ISP); - - /* role is host */ - } else { - if (!(otg_ctrl & OTG_ID)) { - otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; - omap_writel(otg_ctrl | OTG_A_BUSREQ, OTG_CTRL); - } - - if (isp->otg.host) { - switch (isp->otg.state) { - case OTG_STATE_B_WAIT_ACON: - isp->otg.state = OTG_STATE_B_HOST; - pr_debug(" --> b_host\n"); - kick = 1; - break; - case OTG_STATE_A_WAIT_BCON: - isp->otg.state = OTG_STATE_A_HOST; - pr_debug(" --> a_host\n"); - break; - case OTG_STATE_A_PERIPHERAL: - isp->otg.state = OTG_STATE_A_WAIT_BCON; - pr_debug(" --> a_wait_bcon\n"); - break; - default: - break; - } - isp1301_defer_work(isp, WORK_HOST_RESUME); - } - } - - omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC); - ret = IRQ_HANDLED; - - if (kick) - usb_bus_start_enum(isp->otg.host, - isp->otg.host->otg_port); - } - - check_state(isp, __func__); - return ret; -} - -static struct platform_device *otg_dev; - -static int isp1301_otg_init(struct isp1301 *isp) -{ - u32 l; - - if (!otg_dev) - return -ENODEV; - - dump_regs(isp, __func__); - /* some of these values are board-specific... */ - l = omap_readl(OTG_SYSCON_2); - l |= OTG_EN - /* for B-device: */ - | SRP_GPDATA /* 9msec Bdev D+ pulse */ - | SRP_GPDVBUS /* discharge after VBUS pulse */ - // | (3 << 24) /* 2msec VBUS pulse */ - /* for A-device: */ - | (0 << 20) /* 200ms nominal A_WAIT_VRISE timer */ - | SRP_DPW /* detect 167+ns SRP pulses */ - | SRP_DATA | SRP_VBUS /* accept both kinds of SRP pulse */ - ; - omap_writel(l, OTG_SYSCON_2); - - update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE)); - update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS)); - - check_state(isp, __func__); - pr_debug("otg: %s, %s %06x\n", - state_name(isp), __func__, omap_readl(OTG_CTRL)); - - omap_writew(DRIVER_SWITCH | OPRT_CHG - | B_SRP_TMROUT | B_HNP_FAIL - | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT, OTG_IRQ_EN); - - l = omap_readl(OTG_SYSCON_2); - l |= OTG_EN; - omap_writel(l, OTG_SYSCON_2); - - return 0; -} - -static int otg_probe(struct platform_device *dev) -{ - // struct omap_usb_config *config = dev->platform_data; - - otg_dev = dev; - return 0; -} - -static int otg_remove(struct platform_device *dev) -{ - otg_dev = NULL; - return 0; -} - -static struct platform_driver omap_otg_driver = { - .probe = otg_probe, - .remove = otg_remove, - .driver = { - .owner = THIS_MODULE, - .name = "omap_otg", - }, -}; - -static int otg_bind(struct isp1301 *isp) -{ - int status; - - if (otg_dev) - return -EBUSY; - - status = platform_driver_register(&omap_otg_driver); - if (status < 0) - return status; - - if (otg_dev) - status = request_irq(otg_dev->resource[1].start, omap_otg_irq, - IRQF_DISABLED, DRIVER_NAME, isp); - else - status = -ENODEV; - - if (status < 0) - platform_driver_unregister(&omap_otg_driver); - return status; -} - -static void otg_unbind(struct isp1301 *isp) -{ - if (!otg_dev) - return; - free_irq(otg_dev->resource[1].start, isp); -} - -#else - -/* OTG controller isn't clocked */ - -#endif /* CONFIG_USB_OTG */ - -/*-------------------------------------------------------------------------*/ - -static void b_peripheral(struct isp1301 *isp) -{ - u32 l; - - l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS; - omap_writel(l, OTG_CTRL); - - usb_gadget_vbus_connect(isp->otg.gadget); - -#ifdef CONFIG_USB_OTG - enable_vbus_draw(isp, 8); - otg_update_isp(isp); -#else - enable_vbus_draw(isp, 100); - /* UDC driver just set OTG_BSESSVLD */ - isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP); - isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN); - isp->otg.state = OTG_STATE_B_PERIPHERAL; - pr_debug(" --> b_peripheral\n"); - dump_regs(isp, "2periph"); -#endif -} - -static void isp_update_otg(struct isp1301 *isp, u8 stat) -{ - u8 isp_stat, isp_bstat; - enum usb_otg_state state = isp->otg.state; - - if (stat & INTR_BDIS_ACON) - pr_debug("OTG: BDIS_ACON, %s\n", state_name(isp)); - - /* start certain state transitions right away */ - isp_stat = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE); - if (isp_stat & INTR_ID_GND) { - if (isp->otg.default_a) { - switch (state) { - case OTG_STATE_B_IDLE: - a_idle(isp, "idle"); - /* FALLTHROUGH */ - case OTG_STATE_A_IDLE: - enable_vbus_source(isp); - /* FALLTHROUGH */ - case OTG_STATE_A_WAIT_VRISE: - /* we skip over OTG_STATE_A_WAIT_BCON, since - * the HC will transition to A_HOST (or - * A_SUSPEND!) without our noticing except - * when HNP is used. - */ - if (isp_stat & INTR_VBUS_VLD) - isp->otg.state = OTG_STATE_A_HOST; - break; - case OTG_STATE_A_WAIT_VFALL: - if (!(isp_stat & INTR_SESS_VLD)) - a_idle(isp, "vfell"); - break; - default: - if (!(isp_stat & INTR_VBUS_VLD)) - isp->otg.state = OTG_STATE_A_VBUS_ERR; - break; - } - isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS); - } else { - switch (state) { - case OTG_STATE_B_PERIPHERAL: - case OTG_STATE_B_HOST: - case OTG_STATE_B_WAIT_ACON: - usb_gadget_vbus_disconnect(isp->otg.gadget); - break; - default: - break; - } - if (state != OTG_STATE_A_IDLE) - a_idle(isp, "id"); - if (isp->otg.host && state == OTG_STATE_A_IDLE) - isp1301_defer_work(isp, WORK_HOST_RESUME); - isp_bstat = 0; - } - } else { - u32 l; - - /* if user unplugged mini-A end of cable, - * don't bypass A_WAIT_VFALL. - */ - if (isp->otg.default_a) { - switch (state) { - default: - isp->otg.state = OTG_STATE_A_WAIT_VFALL; - break; - case OTG_STATE_A_WAIT_VFALL: - state = OTG_STATE_A_IDLE; - /* khubd may take a while to notice and - * handle this disconnect, so don't go - * to B_IDLE quite yet. - */ - break; - case OTG_STATE_A_IDLE: - host_suspend(isp); - isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, - MC1_BDIS_ACON_EN); - isp->otg.state = OTG_STATE_B_IDLE; - l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; - l &= ~OTG_CTRL_BITS; - omap_writel(l, OTG_CTRL); - break; - case OTG_STATE_B_IDLE: - break; - } - } - isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS); - - switch (isp->otg.state) { - case OTG_STATE_B_PERIPHERAL: - case OTG_STATE_B_WAIT_ACON: - case OTG_STATE_B_HOST: - if (likely(isp_bstat & OTG_B_SESS_VLD)) - break; - enable_vbus_draw(isp, 0); -#ifndef CONFIG_USB_OTG - /* UDC driver will clear OTG_BSESSVLD */ - isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, - OTG1_DP_PULLDOWN); - isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, - OTG1_DP_PULLUP); - dump_regs(isp, __func__); -#endif - /* FALLTHROUGH */ - case OTG_STATE_B_SRP_INIT: - b_idle(isp, __func__); - l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS; - omap_writel(l, OTG_CTRL); - /* FALLTHROUGH */ - case OTG_STATE_B_IDLE: - if (isp->otg.gadget && (isp_bstat & OTG_B_SESS_VLD)) { -#ifdef CONFIG_USB_OTG - update_otg1(isp, isp_stat); - update_otg2(isp, isp_bstat); -#endif - b_peripheral(isp); - } else if (!(isp_stat & (INTR_VBUS_VLD|INTR_SESS_VLD))) - isp_bstat |= OTG_B_SESS_END; - break; - case OTG_STATE_A_WAIT_VFALL: - break; - default: - pr_debug("otg: unsupported b-device %s\n", - state_name(isp)); - break; - } - } - - if (state != isp->otg.state) - pr_debug(" isp, %s -> %s\n", - state_string(state), state_name(isp)); - -#ifdef CONFIG_USB_OTG - /* update the OTG controller state to match the isp1301; may - * trigger OPRT_CHG irqs for changes going to the isp1301. - */ - update_otg1(isp, isp_stat); - update_otg2(isp, isp_bstat); - check_state(isp, __func__); -#endif - - dump_regs(isp, "isp1301->otg"); -} - -/*-------------------------------------------------------------------------*/ - -static u8 isp1301_clear_latch(struct isp1301 *isp) -{ - u8 latch = isp1301_get_u8(isp, ISP1301_INTERRUPT_LATCH); - isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, latch); - return latch; -} - -static void -isp1301_work(struct work_struct *work) -{ - struct isp1301 *isp = container_of(work, struct isp1301, work); - int stop; - - /* implicit lock: we're the only task using this device */ - isp->working = 1; - do { - stop = test_bit(WORK_STOP, &isp->todo); - -#ifdef CONFIG_USB_OTG - /* transfer state from otg engine to isp1301 */ - if (test_and_clear_bit(WORK_UPDATE_ISP, &isp->todo)) { - otg_update_isp(isp); - put_device(&isp->client->dev); - } -#endif - /* transfer state from isp1301 to otg engine */ - if (test_and_clear_bit(WORK_UPDATE_OTG, &isp->todo)) { - u8 stat = isp1301_clear_latch(isp); - - isp_update_otg(isp, stat); - put_device(&isp->client->dev); - } - - if (test_and_clear_bit(WORK_HOST_RESUME, &isp->todo)) { - u32 otg_ctrl; - - /* - * skip A_WAIT_VRISE; hc transitions invisibly - * skip A_WAIT_BCON; same. - */ - switch (isp->otg.state) { - case OTG_STATE_A_WAIT_BCON: - case OTG_STATE_A_WAIT_VRISE: - isp->otg.state = OTG_STATE_A_HOST; - pr_debug(" --> a_host\n"); - otg_ctrl = omap_readl(OTG_CTRL); - otg_ctrl |= OTG_A_BUSREQ; - otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ) - & OTG_CTRL_MASK; - omap_writel(otg_ctrl, OTG_CTRL); - break; - case OTG_STATE_B_WAIT_ACON: - isp->otg.state = OTG_STATE_B_HOST; - pr_debug(" --> b_host (acon)\n"); - break; - case OTG_STATE_B_HOST: - case OTG_STATE_B_IDLE: - case OTG_STATE_A_IDLE: - break; - default: - pr_debug(" host resume in %s\n", - state_name(isp)); - } - host_resume(isp); - // mdelay(10); - put_device(&isp->client->dev); - } - - if (test_and_clear_bit(WORK_TIMER, &isp->todo)) { -#ifdef VERBOSE - dump_regs(isp, "timer"); - if (!stop) - mod_timer(&isp->timer, jiffies + TIMER_JIFFIES); -#endif - put_device(&isp->client->dev); - } - - if (isp->todo) - dev_vdbg(&isp->client->dev, - "work done, todo = 0x%lx\n", - isp->todo); - if (stop) { - dev_dbg(&isp->client->dev, "stop\n"); - break; - } - } while (isp->todo); - isp->working = 0; -} - -static irqreturn_t isp1301_irq(int irq, void *isp) -{ - isp1301_defer_work(isp, WORK_UPDATE_OTG); - return IRQ_HANDLED; -} - -static void isp1301_timer(unsigned long _isp) -{ - isp1301_defer_work((void *)_isp, WORK_TIMER); -} - -/*-------------------------------------------------------------------------*/ - -static void isp1301_release(struct device *dev) -{ - struct isp1301 *isp; - - isp = dev_get_drvdata(dev); - - /* FIXME -- not with a "new style" driver, it doesn't!! */ - - /* ugly -- i2c hijacks our memory hook to wait_for_completion() */ - if (isp->i2c_release) - isp->i2c_release(dev); - kfree (isp); -} - -static struct isp1301 *the_transceiver; - -static int __exit isp1301_remove(struct i2c_client *i2c) -{ - struct isp1301 *isp; - - isp = i2c_get_clientdata(i2c); - - isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0); - isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0); - free_irq(i2c->irq, isp); -#ifdef CONFIG_USB_OTG - otg_unbind(isp); -#endif - if (machine_is_omap_h2()) - gpio_free(2); - - isp->timer.data = 0; - set_bit(WORK_STOP, &isp->todo); - del_timer_sync(&isp->timer); - flush_work_sync(&isp->work); - - put_device(&i2c->dev); - the_transceiver = NULL; - - return 0; -} - -/*-------------------------------------------------------------------------*/ - -/* NOTE: three modes are possible here, only one of which - * will be standards-conformant on any given system: - * - * - OTG mode (dual-role), required if there's a Mini-AB connector - * - HOST mode, for when there's one or more A (host) connectors - * - DEVICE mode, for when there's a B/Mini-B (device) connector - * - * As a rule, you won't have an isp1301 chip unless it's there to - * support the OTG mode. Other modes help testing USB controllers - * in isolation from (full) OTG support, or maybe so later board - * revisions can help to support those feature. - */ - -#ifdef CONFIG_USB_OTG - -static int isp1301_otg_enable(struct isp1301 *isp) -{ - power_up(isp); - isp1301_otg_init(isp); - - /* NOTE: since we don't change this, this provides - * a few more interrupts than are strictly needed. - */ - isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, - INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND); - isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, - INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND); - - dev_info(&isp->client->dev, "ready for dual-role USB ...\n"); - - return 0; -} - -#endif - -/* add or disable the host device+driver */ -static int -isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host) -{ - struct isp1301 *isp = container_of(otg, struct isp1301, otg); - - if (!otg || isp != the_transceiver) - return -ENODEV; - - if (!host) { - omap_writew(0, OTG_IRQ_EN); - power_down(isp); - isp->otg.host = NULL; - return 0; - } - -#ifdef CONFIG_USB_OTG - isp->otg.host = host; - dev_dbg(&isp->client->dev, "registered host\n"); - host_suspend(isp); - if (isp->otg.gadget) - return isp1301_otg_enable(isp); - return 0; - -#elif !defined(CONFIG_USB_GADGET_OMAP) - // FIXME update its refcount - isp->otg.host = host; - - power_up(isp); - - if (machine_is_omap_h2()) - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); - - dev_info(&isp->client->dev, "A-Host sessions ok\n"); - isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, - INTR_ID_GND); - isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, - INTR_ID_GND); - - /* If this has a Mini-AB connector, this mode is highly - * nonstandard ... but can be handy for testing, especially with - * the Mini-A end of an OTG cable. (Or something nonstandard - * like MiniB-to-StandardB, maybe built with a gender mender.) - */ - isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_VBUS_DRV); - - dump_regs(isp, __func__); - - return 0; - -#else - dev_dbg(&isp->client->dev, "host sessions not allowed\n"); - return -EINVAL; -#endif - -} - -static int -isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) -{ - struct isp1301 *isp = container_of(otg, struct isp1301, otg); -#ifndef CONFIG_USB_OTG - u32 l; -#endif - - if (!otg || isp != the_transceiver) - return -ENODEV; - - if (!gadget) { - omap_writew(0, OTG_IRQ_EN); - if (!isp->otg.default_a) - enable_vbus_draw(isp, 0); - usb_gadget_vbus_disconnect(isp->otg.gadget); - isp->otg.gadget = NULL; - power_down(isp); - return 0; - } - -#ifdef CONFIG_USB_OTG - isp->otg.gadget = gadget; - dev_dbg(&isp->client->dev, "registered gadget\n"); - /* gadget driver may be suspended until vbus_connect () */ - if (isp->otg.host) - return isp1301_otg_enable(isp); - return 0; - -#elif !defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OHCI_HCD_MODULE) - isp->otg.gadget = gadget; - // FIXME update its refcount - - l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; - l &= ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS); - l |= OTG_ID; - omap_writel(l, OTG_CTRL); - - power_up(isp); - isp->otg.state = OTG_STATE_B_IDLE; - - if (machine_is_omap_h2() || machine_is_omap_h3()) - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); - - isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, - INTR_SESS_VLD); - isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, - INTR_VBUS_VLD); - dev_info(&isp->client->dev, "B-Peripheral sessions ok\n"); - dump_regs(isp, __func__); - - /* If this has a Mini-AB connector, this mode is highly - * nonstandard ... but can be handy for testing, so long - * as you don't plug a Mini-A cable into the jack. - */ - if (isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE) & INTR_VBUS_VLD) - b_peripheral(isp); - - return 0; - -#else - dev_dbg(&isp->client->dev, "peripheral sessions not allowed\n"); - return -EINVAL; -#endif -} - - -/*-------------------------------------------------------------------------*/ - -static int -isp1301_set_power(struct otg_transceiver *dev, unsigned mA) -{ - if (!the_transceiver) - return -ENODEV; - if (dev->state == OTG_STATE_B_PERIPHERAL) - enable_vbus_draw(the_transceiver, mA); - return 0; -} - -static int -isp1301_start_srp(struct otg_transceiver *dev) -{ - struct isp1301 *isp = container_of(dev, struct isp1301, otg); - u32 otg_ctrl; - - if (!dev || isp != the_transceiver - || isp->otg.state != OTG_STATE_B_IDLE) - return -ENODEV; - - otg_ctrl = omap_readl(OTG_CTRL); - if (!(otg_ctrl & OTG_BSESSEND)) - return -EINVAL; - - otg_ctrl |= OTG_B_BUSREQ; - otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK; - omap_writel(otg_ctrl, OTG_CTRL); - isp->otg.state = OTG_STATE_B_SRP_INIT; - - pr_debug("otg: SRP, %s ... %06x\n", state_name(isp), - omap_readl(OTG_CTRL)); -#ifdef CONFIG_USB_OTG - check_state(isp, __func__); -#endif - return 0; -} - -static int -isp1301_start_hnp(struct otg_transceiver *dev) -{ -#ifdef CONFIG_USB_OTG - struct isp1301 *isp = container_of(dev, struct isp1301, otg); - u32 l; - - if (!dev || isp != the_transceiver) - return -ENODEV; - if (isp->otg.default_a && (isp->otg.host == NULL - || !isp->otg.host->b_hnp_enable)) - return -ENOTCONN; - if (!isp->otg.default_a && (isp->otg.gadget == NULL - || !isp->otg.gadget->b_hnp_enable)) - return -ENOTCONN; - - /* We want hardware to manage most HNP protocol timings. - * So do this part as early as possible... - */ - switch (isp->otg.state) { - case OTG_STATE_B_HOST: - isp->otg.state = OTG_STATE_B_PERIPHERAL; - /* caller will suspend next */ - break; - case OTG_STATE_A_HOST: -#if 0 - /* autoconnect mode avoids irq latency bugs */ - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, - MC1_BDIS_ACON_EN); -#endif - /* caller must suspend then clear A_BUSREQ */ - usb_gadget_vbus_connect(isp->otg.gadget); - l = omap_readl(OTG_CTRL); - l |= OTG_A_SETB_HNPEN; - omap_writel(l, OTG_CTRL); - - break; - case OTG_STATE_A_PERIPHERAL: - /* initiated by B-Host suspend */ - break; - default: - return -EILSEQ; - } - pr_debug("otg: HNP %s, %06x ...\n", - state_name(isp), omap_readl(OTG_CTRL)); - check_state(isp, __func__); - return 0; -#else - /* srp-only */ - return -EINVAL; -#endif -} - -/*-------------------------------------------------------------------------*/ - -static int __devinit -isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id) -{ - int status; - struct isp1301 *isp; - - if (the_transceiver) - return 0; - - isp = kzalloc(sizeof *isp, GFP_KERNEL); - if (!isp) - return 0; - - INIT_WORK(&isp->work, isp1301_work); - init_timer(&isp->timer); - isp->timer.function = isp1301_timer; - isp->timer.data = (unsigned long) isp; - - i2c_set_clientdata(i2c, isp); - isp->client = i2c; - - /* verify the chip (shouldn't be necessary) */ - status = isp1301_get_u16(isp, ISP1301_VENDOR_ID); - if (status != I2C_VENDOR_ID_PHILIPS) { - dev_dbg(&i2c->dev, "not philips id: %d\n", status); - goto fail; - } - status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID); - if (status != I2C_PRODUCT_ID_PHILIPS_1301) { - dev_dbg(&i2c->dev, "not isp1301, %d\n", status); - goto fail; - } - isp->i2c_release = i2c->dev.release; - i2c->dev.release = isp1301_release; - - /* initial development used chiprev 2.00 */ - status = i2c_smbus_read_word_data(i2c, ISP1301_BCD_DEVICE); - dev_info(&i2c->dev, "chiprev %x.%02x, driver " DRIVER_VERSION "\n", - status >> 8, status & 0xff); - - /* make like power-on reset */ - isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_MASK); - - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_BI_DI); - isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, ~MC2_BI_DI); - - isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, - OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN); - isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, - ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); - - isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, ~0); - isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0); - isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0); - -#ifdef CONFIG_USB_OTG - status = otg_bind(isp); - if (status < 0) { - dev_dbg(&i2c->dev, "can't bind OTG\n"); - goto fail; - } -#endif - - if (machine_is_omap_h2()) { - /* full speed signaling by default */ - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, - MC1_SPEED); - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, - MC2_SPD_SUSP_CTRL); - - /* IRQ wired at M14 */ - omap_cfg_reg(M14_1510_GPIO2); - if (gpio_request(2, "isp1301") == 0) - gpio_direction_input(2); - isp->irq_type = IRQF_TRIGGER_FALLING; - } - - isp->irq_type |= IRQF_SAMPLE_RANDOM; - status = request_irq(i2c->irq, isp1301_irq, - isp->irq_type, DRIVER_NAME, isp); - if (status < 0) { - dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n", - i2c->irq, status); - goto fail; - } - - isp->otg.dev = &i2c->dev; - isp->otg.label = DRIVER_NAME; - - isp->otg.set_host = isp1301_set_host, - isp->otg.set_peripheral = isp1301_set_peripheral, - isp->otg.set_power = isp1301_set_power, - isp->otg.start_srp = isp1301_start_srp, - isp->otg.start_hnp = isp1301_start_hnp, - - enable_vbus_draw(isp, 0); - power_down(isp); - the_transceiver = isp; - -#ifdef CONFIG_USB_OTG - update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE)); - update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS)); -#endif - - dump_regs(isp, __func__); - -#ifdef VERBOSE - mod_timer(&isp->timer, jiffies + TIMER_JIFFIES); - dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES); -#endif - - status = otg_set_transceiver(&isp->otg); - if (status < 0) - dev_err(&i2c->dev, "can't register transceiver, %d\n", - status); - - return 0; - -fail: - kfree(isp); - return -ENODEV; -} - -static const struct i2c_device_id isp1301_id[] = { - { "isp1301_omap", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, isp1301_id); - -static struct i2c_driver isp1301_driver = { - .driver = { - .name = "isp1301_omap", - }, - .probe = isp1301_probe, - .remove = __exit_p(isp1301_remove), - .id_table = isp1301_id, -}; - -/*-------------------------------------------------------------------------*/ - -static int __init isp_init(void) -{ - return i2c_add_driver(&isp1301_driver); -} -subsys_initcall(isp_init); - -static void __exit isp_exit(void) -{ - if (the_transceiver) - otg_set_transceiver(NULL); - i2c_del_driver(&isp1301_driver); -} -module_exit(isp_exit); - diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c deleted file mode 100644 index e973ff19c55..00000000000 --- a/drivers/usb/otg/langwell_otg.c +++ /dev/null @@ -1,2381 +0,0 @@ -/* - * Intel Langwell USB OTG transceiver driver - * Copyright (C) 2008 - 2010, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ -/* This driver helps to switch Langwell OTG controller function between host - * and peripheral. It works with EHCI driver and Langwell client controller - * driver together. - */ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/moduleparam.h> -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> -#include <linux/usb.h> -#include <linux/usb/otg.h> -#include <linux/usb/hcd.h> -#include <linux/notifier.h> -#include <linux/delay.h> -#include <asm/intel_scu_ipc.h> - -#include <linux/usb/langwell_otg.h> - -#define DRIVER_DESC "Intel Langwell USB OTG transceiver driver" -#define DRIVER_VERSION "July 10, 2010" - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>"); -MODULE_VERSION(DRIVER_VERSION); -MODULE_LICENSE("GPL"); - -static const char driver_name[] = "langwell_otg"; - -static int langwell_otg_probe(struct pci_dev *pdev, - const struct pci_device_id *id); -static void langwell_otg_remove(struct pci_dev *pdev); -static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message); -static int langwell_otg_resume(struct pci_dev *pdev); - -static int langwell_otg_set_host(struct otg_transceiver *otg, - struct usb_bus *host); -static int langwell_otg_set_peripheral(struct otg_transceiver *otg, - struct usb_gadget *gadget); -static int langwell_otg_start_srp(struct otg_transceiver *otg); - -static const struct pci_device_id pci_ids[] = {{ - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), - .class_mask = ~0, - .vendor = 0x8086, - .device = 0x0811, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, -}, { /* end: all zeroes */ } -}; - -static struct pci_driver otg_pci_driver = { - .name = (char *) driver_name, - .id_table = pci_ids, - - .probe = langwell_otg_probe, - .remove = langwell_otg_remove, - - .suspend = langwell_otg_suspend, - .resume = langwell_otg_resume, -}; - -static const char *state_string(enum usb_otg_state state) -{ - switch (state) { - case OTG_STATE_A_IDLE: - return "a_idle"; - case OTG_STATE_A_WAIT_VRISE: - return "a_wait_vrise"; - case OTG_STATE_A_WAIT_BCON: - return "a_wait_bcon"; - case OTG_STATE_A_HOST: - return "a_host"; - case OTG_STATE_A_SUSPEND: - return "a_suspend"; - case OTG_STATE_A_PERIPHERAL: - return "a_peripheral"; - case OTG_STATE_A_WAIT_VFALL: - return "a_wait_vfall"; - case OTG_STATE_A_VBUS_ERR: - return "a_vbus_err"; - case OTG_STATE_B_IDLE: - return "b_idle"; - case OTG_STATE_B_SRP_INIT: - return "b_srp_init"; - case OTG_STATE_B_PERIPHERAL: - return "b_peripheral"; - case OTG_STATE_B_WAIT_ACON: - return "b_wait_acon"; - case OTG_STATE_B_HOST: - return "b_host"; - default: - return "UNDEFINED"; - } -} - -/* HSM timers */ -static inline struct langwell_otg_timer *otg_timer_initializer -(void (*function)(unsigned long), unsigned long expires, unsigned long data) -{ - struct langwell_otg_timer *timer; - timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL); - if (timer == NULL) - return timer; - - timer->function = function; - timer->expires = expires; - timer->data = data; - return timer; -} - -static struct langwell_otg_timer *a_wait_vrise_tmr, *a_aidl_bdis_tmr, - *b_se0_srp_tmr, *b_srp_init_tmr; - -static struct list_head active_timers; - -static struct langwell_otg *the_transceiver; - -/* host/client notify transceiver when event affects HNP state */ -void langwell_update_transceiver(void) -{ - struct langwell_otg *lnw = the_transceiver; - - dev_dbg(lnw->dev, "transceiver is updated\n"); - - if (!lnw->qwork) - return ; - - queue_work(lnw->qwork, &lnw->work); -} -EXPORT_SYMBOL(langwell_update_transceiver); - -static int langwell_otg_set_host(struct otg_transceiver *otg, - struct usb_bus *host) -{ - otg->host = host; - - return 0; -} - -static int langwell_otg_set_peripheral(struct otg_transceiver *otg, - struct usb_gadget *gadget) -{ - otg->gadget = gadget; - - return 0; -} - -static int langwell_otg_set_power(struct otg_transceiver *otg, - unsigned mA) -{ - return 0; -} - -/* A-device drives vbus, controlled through IPC commands */ -static int langwell_otg_set_vbus(struct otg_transceiver *otg, bool enabled) -{ - struct langwell_otg *lnw = the_transceiver; - u8 sub_id; - - dev_dbg(lnw->dev, "%s <--- %s\n", __func__, enabled ? "on" : "off"); - - if (enabled) - sub_id = 0x8; /* Turn on the VBus */ - else - sub_id = 0x9; /* Turn off the VBus */ - - if (intel_scu_ipc_simple_command(0xef, sub_id)) { - dev_dbg(lnw->dev, "Failed to set Vbus via IPC commands\n"); - return -EBUSY; - } - - dev_dbg(lnw->dev, "%s --->\n", __func__); - - return 0; -} - -/* charge vbus or discharge vbus through a resistor to ground */ -static void langwell_otg_chrg_vbus(int on) -{ - struct langwell_otg *lnw = the_transceiver; - u32 val; - - val = readl(lnw->iotg.base + CI_OTGSC); - - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC, - lnw->iotg.base + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD, - lnw->iotg.base + CI_OTGSC); -} - -/* Start SRP */ -static int langwell_otg_start_srp(struct otg_transceiver *otg) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s --->\n", __func__); - - val = readl(iotg->base + CI_OTGSC); - - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP, - iotg->base + CI_OTGSC); - - /* Check if the data plus is finished or not */ - msleep(8); - val = readl(iotg->base + CI_OTGSC); - if (val & (OTGSC_HADP | OTGSC_DP)) - dev_dbg(lnw->dev, "DataLine SRP Error\n"); - - /* Disable interrupt - b_sess_vld */ - val = readl(iotg->base + CI_OTGSC); - val &= (~(OTGSC_BSVIE | OTGSC_BSEIE)); - writel(val, iotg->base + CI_OTGSC); - - /* Start VBus SRP, drive vbus to generate VBus pulse */ - iotg->otg.set_vbus(&iotg->otg, true); - msleep(15); - iotg->otg.set_vbus(&iotg->otg, false); - - /* Enable interrupt - b_sess_vld*/ - val = readl(iotg->base + CI_OTGSC); - dev_dbg(lnw->dev, "after VBUS pulse otgsc = %x\n", val); - - val |= (OTGSC_BSVIE | OTGSC_BSEIE); - writel(val, iotg->base + CI_OTGSC); - - /* If Vbus is valid, then update the hsm */ - if (val & OTGSC_BSV) { - dev_dbg(lnw->dev, "no b_sess_vld interrupt\n"); - - lnw->iotg.hsm.b_sess_vld = 1; - langwell_update_transceiver(); - } - - dev_dbg(lnw->dev, "%s <---\n", __func__); - return 0; -} - -/* stop SOF via bus_suspend */ -static void langwell_otg_loc_sof(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct usb_hcd *hcd; - int err; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "suspend" : "resume"); - - hcd = bus_to_hcd(lnw->iotg.otg.host); - if (on) - err = hcd->driver->bus_resume(hcd); - else - err = hcd->driver->bus_suspend(hcd); - - if (err) - dev_dbg(lnw->dev, "Fail to resume/suspend USB bus - %d\n", err); - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -static int langwell_otg_check_otgsc(void) -{ - struct langwell_otg *lnw = the_transceiver; - u32 otgsc, usbcfg; - - dev_dbg(lnw->dev, "check sync OTGSC and USBCFG registers\n"); - - otgsc = readl(lnw->iotg.base + CI_OTGSC); - usbcfg = readl(lnw->usbcfg); - - dev_dbg(lnw->dev, "OTGSC = %08x, USBCFG = %08x\n", - otgsc, usbcfg); - dev_dbg(lnw->dev, "OTGSC_AVV = %d\n", !!(otgsc & OTGSC_AVV)); - dev_dbg(lnw->dev, "USBCFG.VBUSVAL = %d\n", - !!(usbcfg & USBCFG_VBUSVAL)); - dev_dbg(lnw->dev, "OTGSC_ASV = %d\n", !!(otgsc & OTGSC_ASV)); - dev_dbg(lnw->dev, "USBCFG.AVALID = %d\n", - !!(usbcfg & USBCFG_AVALID)); - dev_dbg(lnw->dev, "OTGSC_BSV = %d\n", !!(otgsc & OTGSC_BSV)); - dev_dbg(lnw->dev, "USBCFG.BVALID = %d\n", - !!(usbcfg & USBCFG_BVALID)); - dev_dbg(lnw->dev, "OTGSC_BSE = %d\n", !!(otgsc & OTGSC_BSE)); - dev_dbg(lnw->dev, "USBCFG.SESEND = %d\n", - !!(usbcfg & USBCFG_SESEND)); - - /* Check USBCFG VBusValid/AValid/BValid/SessEnd */ - if (!!(otgsc & OTGSC_AVV) ^ !!(usbcfg & USBCFG_VBUSVAL)) { - dev_dbg(lnw->dev, "OTGSC.AVV != USBCFG.VBUSVAL\n"); - goto err; - } - if (!!(otgsc & OTGSC_ASV) ^ !!(usbcfg & USBCFG_AVALID)) { - dev_dbg(lnw->dev, "OTGSC.ASV != USBCFG.AVALID\n"); - goto err; - } - if (!!(otgsc & OTGSC_BSV) ^ !!(usbcfg & USBCFG_BVALID)) { - dev_dbg(lnw->dev, "OTGSC.BSV != USBCFG.BVALID\n"); - goto err; - } - if (!!(otgsc & OTGSC_BSE) ^ !!(usbcfg & USBCFG_SESEND)) { - dev_dbg(lnw->dev, "OTGSC.BSE != USBCFG.SESSEN\n"); - goto err; - } - - dev_dbg(lnw->dev, "OTGSC and USBCFG are synced\n"); - - return 0; - -err: - dev_warn(lnw->dev, "OTGSC isn't equal to USBCFG\n"); - return -EPIPE; -} - - -static void langwell_otg_phy_low_power(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u8 val, phcd; - int retval; - - dev_dbg(lnw->dev, "%s ---> %s mode\n", - __func__, on ? "Low power" : "Normal"); - - phcd = 0x40; - - val = readb(iotg->base + CI_HOSTPC1 + 2); - - if (on) { - /* Due to hardware issue, after set PHCD, sync will failed - * between USBCFG and OTGSC, so before set PHCD, check if - * sync is in process now. If the answer is "yes", then do - * not touch PHCD bit */ - retval = langwell_otg_check_otgsc(); - if (retval) { - dev_dbg(lnw->dev, "Skip PHCD programming..\n"); - return ; - } - - writeb(val | phcd, iotg->base + CI_HOSTPC1 + 2); - } else - writeb(val & ~phcd, iotg->base + CI_HOSTPC1 + 2); - - dev_dbg(lnw->dev, "%s <--- done\n", __func__); -} - -/* After drv vbus, add 5 ms delay to set PHCD */ -static void langwell_otg_phy_low_power_wait(int on) -{ - struct langwell_otg *lnw = the_transceiver; - - dev_dbg(lnw->dev, "add 5ms delay before programing PHCD\n"); - - mdelay(5); - langwell_otg_phy_low_power(on); -} - -/* Enable/Disable OTG interrupt */ -static void langwell_otg_intr(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off"); - - val = readl(iotg->base + CI_OTGSC); - - /* OTGSC_INT_MASK doesn't contains 1msInt */ - if (on) { - val = val | (OTGSC_INT_MASK); - writel(val, iotg->base + CI_OTGSC); - } else { - val = val & ~(OTGSC_INT_MASK); - writel(val, iotg->base + CI_OTGSC); - } - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -/* set HAAR: Hardware Assist Auto-Reset */ -static void langwell_otg_HAAR(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off"); - - val = readl(iotg->base + CI_OTGSC); - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR, - iotg->base + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR, - iotg->base + CI_OTGSC); - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -/* set HABA: Hardware Assist B-Disconnect to A-Connect */ -static void langwell_otg_HABA(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off"); - - val = readl(iotg->base + CI_OTGSC); - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA, - iotg->base + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA, - iotg->base + CI_OTGSC); - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -static int langwell_otg_check_se0_srp(int on) -{ - struct langwell_otg *lnw = the_transceiver; - int delay_time = TB_SE0_SRP * 10; - u32 val; - - dev_dbg(lnw->dev, "%s --->\n", __func__); - - do { - udelay(100); - if (!delay_time--) - break; - val = readl(lnw->iotg.base + CI_PORTSC1); - val &= PORTSC_LS; - } while (!val); - - dev_dbg(lnw->dev, "%s <---\n", __func__); - return val; -} - -/* The timeout callback function to set time out bit */ -static void set_tmout(unsigned long indicator) -{ - *(int *)indicator = 1; -} - -void langwell_otg_nsf_msg(unsigned long indicator) -{ - struct langwell_otg *lnw = the_transceiver; - - switch (indicator) { - case 2: - case 4: - case 6: - case 7: - dev_warn(lnw->dev, - "OTG:NSF-%lu - deivce not responding\n", indicator); - break; - case 3: - dev_warn(lnw->dev, - "OTG:NSF-%lu - deivce not supported\n", indicator); - break; - default: - dev_warn(lnw->dev, "Do not have this kind of NSF\n"); - break; - } -} - -/* Initialize timers */ -static int langwell_otg_init_timers(struct otg_hsm *hsm) -{ - /* HSM used timers */ - a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE, - (unsigned long)&hsm->a_wait_vrise_tmout); - if (a_wait_vrise_tmr == NULL) - return -ENOMEM; - a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS, - (unsigned long)&hsm->a_aidl_bdis_tmout); - if (a_aidl_bdis_tmr == NULL) - return -ENOMEM; - b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP, - (unsigned long)&hsm->b_se0_srp); - if (b_se0_srp_tmr == NULL) - return -ENOMEM; - b_srp_init_tmr = otg_timer_initializer(&set_tmout, TB_SRP_INIT, - (unsigned long)&hsm->b_srp_init_tmout); - if (b_srp_init_tmr == NULL) - return -ENOMEM; - - return 0; -} - -/* Free timers */ -static void langwell_otg_free_timers(void) -{ - kfree(a_wait_vrise_tmr); - kfree(a_aidl_bdis_tmr); - kfree(b_se0_srp_tmr); - kfree(b_srp_init_tmr); -} - -/* The timeout callback function to set time out bit */ -static void langwell_otg_timer_fn(unsigned long indicator) -{ - struct langwell_otg *lnw = the_transceiver; - - *(int *)indicator = 1; - - dev_dbg(lnw->dev, "kernel timer - timeout\n"); - - langwell_update_transceiver(); -} - -/* kernel timer used instead of HW based interrupt */ -static void langwell_otg_add_ktimer(enum langwell_otg_timer_type timers) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - unsigned long j = jiffies; - unsigned long data, time; - - switch (timers) { - case TA_WAIT_VRISE_TMR: - iotg->hsm.a_wait_vrise_tmout = 0; - data = (unsigned long)&iotg->hsm.a_wait_vrise_tmout; - time = TA_WAIT_VRISE; - break; - case TA_WAIT_BCON_TMR: - iotg->hsm.a_wait_bcon_tmout = 0; - data = (unsigned long)&iotg->hsm.a_wait_bcon_tmout; - time = TA_WAIT_BCON; - break; - case TA_AIDL_BDIS_TMR: - iotg->hsm.a_aidl_bdis_tmout = 0; - data = (unsigned long)&iotg->hsm.a_aidl_bdis_tmout; - time = TA_AIDL_BDIS; - break; - case TB_ASE0_BRST_TMR: - iotg->hsm.b_ase0_brst_tmout = 0; - data = (unsigned long)&iotg->hsm.b_ase0_brst_tmout; - time = TB_ASE0_BRST; - break; - case TB_SRP_INIT_TMR: - iotg->hsm.b_srp_init_tmout = 0; - data = (unsigned long)&iotg->hsm.b_srp_init_tmout; - time = TB_SRP_INIT; - break; - case TB_SRP_FAIL_TMR: - iotg->hsm.b_srp_fail_tmout = 0; - data = (unsigned long)&iotg->hsm.b_srp_fail_tmout; - time = TB_SRP_FAIL; - break; - case TB_BUS_SUSPEND_TMR: - iotg->hsm.b_bus_suspend_tmout = 0; - data = (unsigned long)&iotg->hsm.b_bus_suspend_tmout; - time = TB_BUS_SUSPEND; - break; - default: - dev_dbg(lnw->dev, "unknown timer, cannot enable it\n"); - return; - } - - lnw->hsm_timer.data = data; - lnw->hsm_timer.function = langwell_otg_timer_fn; - lnw->hsm_timer.expires = j + time * HZ / 1000; /* milliseconds */ - - add_timer(&lnw->hsm_timer); - - dev_dbg(lnw->dev, "add timer successfully\n"); -} - -/* Add timer to timer list */ -static void langwell_otg_add_timer(void *gtimer) -{ - struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer; - struct langwell_otg_timer *tmp_timer; - struct intel_mid_otg_xceiv *iotg = &the_transceiver->iotg; - u32 val32; - - /* Check if the timer is already in the active list, - * if so update timer count - */ - list_for_each_entry(tmp_timer, &active_timers, list) - if (tmp_timer == timer) { - timer->count = timer->expires; - return; - } - timer->count = timer->expires; - - if (list_empty(&active_timers)) { - val32 = readl(iotg->base + CI_OTGSC); - writel(val32 | OTGSC_1MSE, iotg->base + CI_OTGSC); - } - - list_add_tail(&timer->list, &active_timers); -} - -/* Remove timer from the timer list; clear timeout status */ -static void langwell_otg_del_timer(void *gtimer) -{ - struct langwell_otg *lnw = the_transceiver; - struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer; - struct langwell_otg_timer *tmp_timer, *del_tmp; - u32 val32; - - list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) - if (tmp_timer == timer) - list_del(&timer->list); - - if (list_empty(&active_timers)) { - val32 = readl(lnw->iotg.base + CI_OTGSC); - writel(val32 & ~OTGSC_1MSE, lnw->iotg.base + CI_OTGSC); - } -} - -/* Reduce timer count by 1, and find timeout conditions.*/ -static int langwell_otg_tick_timer(u32 *int_sts) -{ - struct langwell_otg *lnw = the_transceiver; - struct langwell_otg_timer *tmp_timer, *del_tmp; - int expired = 0; - - list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) { - tmp_timer->count--; - /* check if timer expires */ - if (!tmp_timer->count) { - list_del(&tmp_timer->list); - tmp_timer->function(tmp_timer->data); - expired = 1; - } - } - - if (list_empty(&active_timers)) { - dev_dbg(lnw->dev, "tick timer: disable 1ms int\n"); - *int_sts = *int_sts & ~OTGSC_1MSE; - } - return expired; -} - -static void reset_otg(void) -{ - struct langwell_otg *lnw = the_transceiver; - int delay_time = 1000; - u32 val; - - dev_dbg(lnw->dev, "reseting OTG controller ...\n"); - val = readl(lnw->iotg.base + CI_USBCMD); - writel(val | USBCMD_RST, lnw->iotg.base + CI_USBCMD); - do { - udelay(100); - if (!delay_time--) - dev_dbg(lnw->dev, "reset timeout\n"); - val = readl(lnw->iotg.base + CI_USBCMD); - val &= USBCMD_RST; - } while (val != 0); - dev_dbg(lnw->dev, "reset done.\n"); -} - -static void set_host_mode(void) -{ - struct langwell_otg *lnw = the_transceiver; - u32 val; - - reset_otg(); - val = readl(lnw->iotg.base + CI_USBMODE); - val = (val & (~USBMODE_CM)) | USBMODE_HOST; - writel(val, lnw->iotg.base + CI_USBMODE); -} - -static void set_client_mode(void) -{ - struct langwell_otg *lnw = the_transceiver; - u32 val; - - reset_otg(); - val = readl(lnw->iotg.base + CI_USBMODE); - val = (val & (~USBMODE_CM)) | USBMODE_DEVICE; - writel(val, lnw->iotg.base + CI_USBMODE); -} - -static void init_hsm(void) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val32; - - /* read OTGSC after reset */ - val32 = readl(lnw->iotg.base + CI_OTGSC); - dev_dbg(lnw->dev, "%s: OTGSC init value = 0x%x\n", __func__, val32); - - /* set init state */ - if (val32 & OTGSC_ID) { - iotg->hsm.id = 1; - iotg->otg.default_a = 0; - set_client_mode(); - iotg->otg.state = OTG_STATE_B_IDLE; - } else { - iotg->hsm.id = 0; - iotg->otg.default_a = 1; - set_host_mode(); - iotg->otg.state = OTG_STATE_A_IDLE; - } - - /* set session indicator */ - if (val32 & OTGSC_BSE) - iotg->hsm.b_sess_end = 1; - if (val32 & OTGSC_BSV) - iotg->hsm.b_sess_vld = 1; - if (val32 & OTGSC_ASV) - iotg->hsm.a_sess_vld = 1; - if (val32 & OTGSC_AVV) - iotg->hsm.a_vbus_vld = 1; - - /* defautly power the bus */ - iotg->hsm.a_bus_req = 1; - iotg->hsm.a_bus_drop = 0; - /* defautly don't request bus as B device */ - iotg->hsm.b_bus_req = 0; - /* no system error */ - iotg->hsm.a_clr_err = 0; - - langwell_otg_phy_low_power_wait(1); -} - -static void update_hsm(void) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val32; - - /* read OTGSC */ - val32 = readl(lnw->iotg.base + CI_OTGSC); - dev_dbg(lnw->dev, "%s: OTGSC value = 0x%x\n", __func__, val32); - - iotg->hsm.id = !!(val32 & OTGSC_ID); - iotg->hsm.b_sess_end = !!(val32 & OTGSC_BSE); - iotg->hsm.b_sess_vld = !!(val32 & OTGSC_BSV); - iotg->hsm.a_sess_vld = !!(val32 & OTGSC_ASV); - iotg->hsm.a_vbus_vld = !!(val32 & OTGSC_AVV); -} - -static irqreturn_t otg_dummy_irq(int irq, void *_dev) -{ - struct langwell_otg *lnw = the_transceiver; - void __iomem *reg_base = _dev; - u32 val; - u32 int_mask = 0; - - val = readl(reg_base + CI_USBMODE); - if ((val & USBMODE_CM) != USBMODE_DEVICE) - return IRQ_NONE; - - val = readl(reg_base + CI_USBSTS); - int_mask = val & INTR_DUMMY_MASK; - - if (int_mask == 0) - return IRQ_NONE; - - /* clear hsm.b_conn here since host driver can't detect it - * otg_dummy_irq called means B-disconnect happened. - */ - if (lnw->iotg.hsm.b_conn) { - lnw->iotg.hsm.b_conn = 0; - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - } - - /* Clear interrupts */ - writel(int_mask, reg_base + CI_USBSTS); - return IRQ_HANDLED; -} - -static irqreturn_t otg_irq(int irq, void *_dev) -{ - struct langwell_otg *lnw = _dev; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 int_sts, int_en; - u32 int_mask = 0; - int flag = 0; - - int_sts = readl(lnw->iotg.base + CI_OTGSC); - int_en = (int_sts & OTGSC_INTEN_MASK) >> 8; - int_mask = int_sts & int_en; - if (int_mask == 0) - return IRQ_NONE; - - if (int_mask & OTGSC_IDIS) { - dev_dbg(lnw->dev, "%s: id change int\n", __func__); - iotg->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0; - dev_dbg(lnw->dev, "id = %d\n", iotg->hsm.id); - flag = 1; - } - if (int_mask & OTGSC_DPIS) { - dev_dbg(lnw->dev, "%s: data pulse int\n", __func__); - iotg->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0; - dev_dbg(lnw->dev, "data pulse = %d\n", iotg->hsm.a_srp_det); - flag = 1; - } - if (int_mask & OTGSC_BSEIS) { - dev_dbg(lnw->dev, "%s: b session end int\n", __func__); - iotg->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0; - dev_dbg(lnw->dev, "b_sess_end = %d\n", iotg->hsm.b_sess_end); - flag = 1; - } - if (int_mask & OTGSC_BSVIS) { - dev_dbg(lnw->dev, "%s: b session valid int\n", __func__); - iotg->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0; - dev_dbg(lnw->dev, "b_sess_vld = %d\n", iotg->hsm.b_sess_end); - flag = 1; - } - if (int_mask & OTGSC_ASVIS) { - dev_dbg(lnw->dev, "%s: a session valid int\n", __func__); - iotg->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0; - dev_dbg(lnw->dev, "a_sess_vld = %d\n", iotg->hsm.a_sess_vld); - flag = 1; - } - if (int_mask & OTGSC_AVVIS) { - dev_dbg(lnw->dev, "%s: a vbus valid int\n", __func__); - iotg->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0; - dev_dbg(lnw->dev, "a_vbus_vld = %d\n", iotg->hsm.a_vbus_vld); - flag = 1; - } - - if (int_mask & OTGSC_1MSS) { - /* need to schedule otg_work if any timer is expired */ - if (langwell_otg_tick_timer(&int_sts)) - flag = 1; - } - - writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask, - lnw->iotg.base + CI_OTGSC); - if (flag) - langwell_update_transceiver(); - - return IRQ_HANDLED; -} - -static int langwell_otg_iotg_notify(struct notifier_block *nb, - unsigned long action, void *data) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = data; - int flag = 0; - - if (iotg == NULL) - return NOTIFY_BAD; - - if (lnw == NULL) - return NOTIFY_BAD; - - switch (action) { - case MID_OTG_NOTIFY_CONNECT: - dev_dbg(lnw->dev, "Lnw OTG Notify Connect Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.b_conn = 1; - else - iotg->hsm.a_conn = 1; - flag = 1; - break; - case MID_OTG_NOTIFY_DISCONN: - dev_dbg(lnw->dev, "Lnw OTG Notify Disconnect Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.b_conn = 0; - else - iotg->hsm.a_conn = 0; - flag = 1; - break; - case MID_OTG_NOTIFY_HSUSPEND: - dev_dbg(lnw->dev, "Lnw OTG Notify Host Bus suspend Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.a_suspend_req = 1; - else - iotg->hsm.b_bus_req = 0; - flag = 1; - break; - case MID_OTG_NOTIFY_HRESUME: - dev_dbg(lnw->dev, "Lnw OTG Notify Host Bus resume Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.b_bus_resume = 1; - flag = 1; - break; - case MID_OTG_NOTIFY_CSUSPEND: - dev_dbg(lnw->dev, "Lnw OTG Notify Client Bus suspend Event\n"); - if (iotg->otg.default_a == 1) { - if (iotg->hsm.b_bus_suspend_vld == 2) { - iotg->hsm.b_bus_suspend = 1; - iotg->hsm.b_bus_suspend_vld = 0; - flag = 1; - } else { - iotg->hsm.b_bus_suspend_vld++; - flag = 0; - } - } else { - if (iotg->hsm.a_bus_suspend == 0) { - iotg->hsm.a_bus_suspend = 1; - flag = 1; - } - } - break; - case MID_OTG_NOTIFY_CRESUME: - dev_dbg(lnw->dev, "Lnw OTG Notify Client Bus resume Event\n"); - if (iotg->otg.default_a == 0) - iotg->hsm.a_bus_suspend = 0; - flag = 0; - break; - case MID_OTG_NOTIFY_HOSTADD: - dev_dbg(lnw->dev, "Lnw OTG Nofity Host Driver Add\n"); - flag = 1; - break; - case MID_OTG_NOTIFY_HOSTREMOVE: - dev_dbg(lnw->dev, "Lnw OTG Nofity Host Driver remove\n"); - flag = 1; - break; - case MID_OTG_NOTIFY_CLIENTADD: - dev_dbg(lnw->dev, "Lnw OTG Nofity Client Driver Add\n"); - flag = 1; - break; - case MID_OTG_NOTIFY_CLIENTREMOVE: - dev_dbg(lnw->dev, "Lnw OTG Nofity Client Driver remove\n"); - flag = 1; - break; - default: - dev_dbg(lnw->dev, "Lnw OTG Nofity unknown notify message\n"); - return NOTIFY_DONE; - } - - if (flag) - langwell_update_transceiver(); - - return NOTIFY_OK; -} - -static void langwell_otg_work(struct work_struct *work) -{ - struct langwell_otg *lnw; - struct intel_mid_otg_xceiv *iotg; - int retval; - struct pci_dev *pdev; - - lnw = container_of(work, struct langwell_otg, work); - iotg = &lnw->iotg; - pdev = to_pci_dev(lnw->dev); - - dev_dbg(lnw->dev, "%s: old state = %s\n", __func__, - state_string(iotg->otg.state)); - - switch (iotg->otg.state) { - case OTG_STATE_UNDEFINED: - case OTG_STATE_B_IDLE: - if (!iotg->hsm.id) { - langwell_otg_del_timer(b_srp_init_tmr); - del_timer_sync(&lnw->hsm_timer); - - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - set_host_mode(); - langwell_otg_phy_low_power(1); - - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.b_sess_vld) { - langwell_otg_del_timer(b_srp_init_tmr); - del_timer_sync(&lnw->hsm_timer); - iotg->hsm.b_sess_end = 0; - iotg->hsm.a_bus_suspend = 0; - langwell_otg_chrg_vbus(0); - - if (lnw->iotg.start_peripheral) { - lnw->iotg.start_peripheral(&lnw->iotg); - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } else - dev_dbg(lnw->dev, "client driver not loaded\n"); - - } else if (iotg->hsm.b_srp_init_tmout) { - iotg->hsm.b_srp_init_tmout = 0; - dev_warn(lnw->dev, "SRP init timeout\n"); - } else if (iotg->hsm.b_srp_fail_tmout) { - iotg->hsm.b_srp_fail_tmout = 0; - iotg->hsm.b_bus_req = 0; - - /* No silence failure */ - langwell_otg_nsf_msg(6); - } else if (iotg->hsm.b_bus_req && iotg->hsm.b_sess_end) { - del_timer_sync(&lnw->hsm_timer); - /* workaround for b_se0_srp detection */ - retval = langwell_otg_check_se0_srp(0); - if (retval) { - iotg->hsm.b_bus_req = 0; - dev_dbg(lnw->dev, "LS isn't SE0, try later\n"); - } else { - /* clear the PHCD before start srp */ - langwell_otg_phy_low_power(0); - - /* Start SRP */ - langwell_otg_add_timer(b_srp_init_tmr); - iotg->otg.start_srp(&iotg->otg); - langwell_otg_del_timer(b_srp_init_tmr); - langwell_otg_add_ktimer(TB_SRP_FAIL_TMR); - - /* reset PHY low power mode here */ - langwell_otg_phy_low_power_wait(1); - } - } - break; - case OTG_STATE_B_SRP_INIT: - if (!iotg->hsm.id) { - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_chrg_vbus(0); - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.b_sess_vld) { - langwell_otg_chrg_vbus(0); - if (lnw->iotg.start_peripheral) { - lnw->iotg.start_peripheral(&lnw->iotg); - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } else - dev_dbg(lnw->dev, "client driver not loaded\n"); - } - break; - case OTG_STATE_B_PERIPHERAL: - if (!iotg->hsm.id) { - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.b_sess_vld) { - iotg->hsm.b_hnp_enable = 0; - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - iotg->otg.state = OTG_STATE_B_IDLE; - } else if (iotg->hsm.b_bus_req && iotg->otg.gadget && - iotg->otg.gadget->b_hnp_enable && - iotg->hsm.a_bus_suspend) { - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - langwell_otg_HAAR(1); - iotg->hsm.a_conn = 0; - - if (lnw->iotg.start_host) { - lnw->iotg.start_host(&lnw->iotg); - iotg->otg.state = OTG_STATE_B_WAIT_ACON; - } else - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - - iotg->hsm.a_bus_resume = 0; - langwell_otg_add_ktimer(TB_ASE0_BRST_TMR); - } - break; - - case OTG_STATE_B_WAIT_ACON: - if (!iotg->hsm.id) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - - langwell_otg_HAAR(0); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.b_sess_vld) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->hsm.b_hnp_enable = 0; - iotg->hsm.b_bus_req = 0; - - langwell_otg_chrg_vbus(0); - langwell_otg_HAAR(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - } else if (iotg->hsm.a_conn) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - langwell_otg_HAAR(0); - iotg->otg.state = OTG_STATE_B_HOST; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_resume || - iotg->hsm.b_ase0_brst_tmout) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - langwell_otg_HAAR(0); - langwell_otg_nsf_msg(7); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - iotg->hsm.a_bus_suspend = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.start_peripheral) - lnw->iotg.start_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver not loaded.\n"); - - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } - break; - - case OTG_STATE_B_HOST: - if (!iotg->hsm.id) { - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.b_sess_vld) { - iotg->hsm.b_hnp_enable = 0; - iotg->hsm.b_bus_req = 0; - - langwell_otg_chrg_vbus(0); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - } else if ((!iotg->hsm.b_bus_req) || - (!iotg->hsm.a_conn)) { - iotg->hsm.b_bus_req = 0; - langwell_otg_loc_sof(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - iotg->hsm.a_bus_suspend = 0; - - if (lnw->iotg.start_peripheral) - lnw->iotg.start_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver not loaded.\n"); - - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } - break; - - case OTG_STATE_A_IDLE: - iotg->otg.default_a = 1; - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - iotg->hsm.vbus_srp_up = 0; - - langwell_otg_chrg_vbus(0); - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_bus_drop && - (iotg->hsm.a_srp_det || iotg->hsm.a_bus_req)) { - langwell_otg_phy_low_power(0); - - /* Turn on VBus */ - iotg->otg.set_vbus(&iotg->otg, true); - - iotg->hsm.vbus_srp_up = 0; - iotg->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - iotg->otg.state = OTG_STATE_A_WAIT_VRISE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_bus_drop && iotg->hsm.a_sess_vld) { - iotg->hsm.vbus_srp_up = 1; - } else if (!iotg->hsm.a_sess_vld && iotg->hsm.vbus_srp_up) { - msleep(10); - langwell_otg_phy_low_power(0); - - /* Turn on VBus */ - iotg->otg.set_vbus(&iotg->otg, true); - iotg->hsm.a_srp_det = 1; - iotg->hsm.vbus_srp_up = 0; - iotg->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - iotg->otg.state = OTG_STATE_A_WAIT_VRISE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_sess_vld && - !iotg->hsm.vbus_srp_up) { - langwell_otg_phy_low_power(1); - } - break; - case OTG_STATE_A_WAIT_VRISE: - if (iotg->hsm.id) { - langwell_otg_del_timer(a_wait_vrise_tmr); - iotg->hsm.b_bus_req = 0; - iotg->otg.default_a = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - } else if (iotg->hsm.a_vbus_vld) { - langwell_otg_del_timer(a_wait_vrise_tmr); - iotg->hsm.b_conn = 0; - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else { - dev_dbg(lnw->dev, "host driver not loaded.\n"); - break; - } - - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } else if (iotg->hsm.a_wait_vrise_tmout) { - iotg->hsm.b_conn = 0; - if (iotg->hsm.a_vbus_vld) { - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else { - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - break; - } - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } else { - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } - } - break; - case OTG_STATE_A_WAIT_BCON: - if (iotg->hsm.id) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_vbus_vld) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (iotg->hsm.a_bus_drop || - (iotg->hsm.a_wait_bcon_tmout && - !iotg->hsm.a_bus_req)) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (iotg->hsm.b_conn) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->hsm.a_suspend_req = 0; - iotg->otg.state = OTG_STATE_A_HOST; - if (iotg->hsm.a_srp_det && iotg->otg.host && - !iotg->otg.host->b_hnp_enable) { - /* SRP capable peripheral-only device */ - iotg->hsm.a_bus_req = 1; - iotg->hsm.a_srp_det = 0; - } else if (!iotg->hsm.a_bus_req && iotg->otg.host && - iotg->otg.host->b_hnp_enable) { - /* It is not safe enough to do a fast - * transition from A_WAIT_BCON to - * A_SUSPEND */ - msleep(10000); - if (iotg->hsm.a_bus_req) - break; - - if (request_irq(pdev->irq, - otg_dummy_irq, IRQF_SHARED, - driver_name, iotg->base) != 0) { - dev_dbg(lnw->dev, - "request interrupt %d fail\n", - pdev->irq); - } - - langwell_otg_HABA(1); - iotg->hsm.b_bus_resume = 0; - iotg->hsm.a_aidl_bdis_tmout = 0; - - langwell_otg_loc_sof(0); - /* clear PHCD to enable HW timer */ - langwell_otg_phy_low_power(0); - langwell_otg_add_timer(a_aidl_bdis_tmr); - iotg->otg.state = OTG_STATE_A_SUSPEND; - } else if (!iotg->hsm.a_bus_req && iotg->otg.host && - !iotg->otg.host->b_hnp_enable) { - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } - } - break; - case OTG_STATE_A_HOST: - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_drop || - (iotg->otg.host && - !iotg->otg.host->b_hnp_enable && - !iotg->hsm.a_bus_req)) { - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (!iotg->hsm.a_vbus_vld) { - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (iotg->otg.host && - iotg->otg.host->b_hnp_enable && - !iotg->hsm.a_bus_req) { - /* Set HABA to enable hardware assistance to signal - * A-connect after receiver B-disconnect. Hardware - * will then set client mode and enable URE, SLE and - * PCE after the assistance. otg_dummy_irq is used to - * clean these ints when client driver is not resumed. - */ - if (request_irq(pdev->irq, otg_dummy_irq, IRQF_SHARED, - driver_name, iotg->base) != 0) { - dev_dbg(lnw->dev, - "request interrupt %d failed\n", - pdev->irq); - } - - /* set HABA */ - langwell_otg_HABA(1); - iotg->hsm.b_bus_resume = 0; - iotg->hsm.a_aidl_bdis_tmout = 0; - langwell_otg_loc_sof(0); - /* clear PHCD to enable HW timer */ - langwell_otg_phy_low_power(0); - langwell_otg_add_timer(a_aidl_bdis_tmr); - iotg->otg.state = OTG_STATE_A_SUSPEND; - } else if (!iotg->hsm.b_conn || !iotg->hsm.a_bus_req) { - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } - break; - case OTG_STATE_A_SUSPEND: - if (iotg->hsm.id) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_req || - iotg->hsm.b_bus_resume) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - iotg->hsm.a_suspend_req = 0; - langwell_otg_loc_sof(1); - iotg->otg.state = OTG_STATE_A_HOST; - } else if (iotg->hsm.a_aidl_bdis_tmout || - iotg->hsm.a_bus_drop) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (!iotg->hsm.b_conn && iotg->otg.host && - iotg->otg.host->b_hnp_enable) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - iotg->hsm.b_bus_suspend = 0; - iotg->hsm.b_bus_suspend_vld = 0; - - /* msleep(200); */ - if (lnw->iotg.start_peripheral) - lnw->iotg.start_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver not loaded.\n"); - - langwell_otg_add_ktimer(TB_BUS_SUSPEND_TMR); - iotg->otg.state = OTG_STATE_A_PERIPHERAL; - break; - } else if (!iotg->hsm.a_vbus_vld) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } - break; - case OTG_STATE_A_PERIPHERAL: - if (iotg->hsm.id) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_vbus_vld) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (iotg->hsm.a_bus_drop) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (iotg->hsm.b_bus_suspend) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } else if (iotg->hsm.b_bus_suspend_tmout) { - u32 val; - val = readl(lnw->iotg.base + CI_PORTSC1); - if (!(val & PORTSC_SUSP)) - break; - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } - break; - case OTG_STATE_A_VBUS_ERR: - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - iotg->hsm.a_clr_err = 0; - iotg->hsm.a_srp_det = 0; - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_clr_err) { - iotg->hsm.a_clr_err = 0; - iotg->hsm.a_srp_det = 0; - reset_otg(); - init_hsm(); - if (iotg->otg.state == OTG_STATE_A_IDLE) - langwell_update_transceiver(); - } else { - /* FW will clear PHCD bit when any VBus - * event detected. Reset PHCD to 1 again */ - langwell_otg_phy_low_power(1); - } - break; - case OTG_STATE_A_WAIT_VFALL: - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_req) { - - /* Turn on VBus */ - iotg->otg.set_vbus(&iotg->otg, true); - iotg->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - iotg->otg.state = OTG_STATE_A_WAIT_VRISE; - } else if (!iotg->hsm.a_sess_vld) { - iotg->hsm.a_srp_det = 0; - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - } - break; - default: - ; - } - - dev_dbg(lnw->dev, "%s: new state = %s\n", __func__, - state_string(iotg->otg.state)); -} - -static ssize_t -show_registers(struct device *_dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, - "\n" - "USBCMD = 0x%08x\n" - "USBSTS = 0x%08x\n" - "USBINTR = 0x%08x\n" - "ASYNCLISTADDR = 0x%08x\n" - "PORTSC1 = 0x%08x\n" - "HOSTPC1 = 0x%08x\n" - "OTGSC = 0x%08x\n" - "USBMODE = 0x%08x\n", - readl(lnw->iotg.base + 0x30), - readl(lnw->iotg.base + 0x34), - readl(lnw->iotg.base + 0x38), - readl(lnw->iotg.base + 0x48), - readl(lnw->iotg.base + 0x74), - readl(lnw->iotg.base + 0xb4), - readl(lnw->iotg.base + 0xf4), - readl(lnw->iotg.base + 0xf8) - ); - size -= t; - next += t; - - return PAGE_SIZE - size; -} -static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL); - -static ssize_t -show_hsm(struct device *_dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - if (iotg->otg.host) - iotg->hsm.a_set_b_hnp_en = iotg->otg.host->b_hnp_enable; - - if (iotg->otg.gadget) - iotg->hsm.b_hnp_enable = iotg->otg.gadget->b_hnp_enable; - - t = scnprintf(next, size, - "\n" - "current state = %s\n" - "a_bus_resume = \t%d\n" - "a_bus_suspend = \t%d\n" - "a_conn = \t%d\n" - "a_sess_vld = \t%d\n" - "a_srp_det = \t%d\n" - "a_vbus_vld = \t%d\n" - "b_bus_resume = \t%d\n" - "b_bus_suspend = \t%d\n" - "b_conn = \t%d\n" - "b_se0_srp = \t%d\n" - "b_sess_end = \t%d\n" - "b_sess_vld = \t%d\n" - "id = \t%d\n" - "a_set_b_hnp_en = \t%d\n" - "b_srp_done = \t%d\n" - "b_hnp_enable = \t%d\n" - "a_wait_vrise_tmout = \t%d\n" - "a_wait_bcon_tmout = \t%d\n" - "a_aidl_bdis_tmout = \t%d\n" - "b_ase0_brst_tmout = \t%d\n" - "a_bus_drop = \t%d\n" - "a_bus_req = \t%d\n" - "a_clr_err = \t%d\n" - "a_suspend_req = \t%d\n" - "b_bus_req = \t%d\n" - "b_bus_suspend_tmout = \t%d\n" - "b_bus_suspend_vld = \t%d\n", - state_string(iotg->otg.state), - iotg->hsm.a_bus_resume, - iotg->hsm.a_bus_suspend, - iotg->hsm.a_conn, - iotg->hsm.a_sess_vld, - iotg->hsm.a_srp_det, - iotg->hsm.a_vbus_vld, - iotg->hsm.b_bus_resume, - iotg->hsm.b_bus_suspend, - iotg->hsm.b_conn, - iotg->hsm.b_se0_srp, - iotg->hsm.b_sess_end, - iotg->hsm.b_sess_vld, - iotg->hsm.id, - iotg->hsm.a_set_b_hnp_en, - iotg->hsm.b_srp_done, - iotg->hsm.b_hnp_enable, - iotg->hsm.a_wait_vrise_tmout, - iotg->hsm.a_wait_bcon_tmout, - iotg->hsm.a_aidl_bdis_tmout, - iotg->hsm.b_ase0_brst_tmout, - iotg->hsm.a_bus_drop, - iotg->hsm.a_bus_req, - iotg->hsm.a_clr_err, - iotg->hsm.a_suspend_req, - iotg->hsm.b_bus_req, - iotg->hsm.b_bus_suspend_tmout, - iotg->hsm.b_bus_suspend_vld - ); - size -= t; - next += t; - - return PAGE_SIZE - size; -} -static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL); - -static ssize_t -get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", lnw->iotg.hsm.a_bus_req); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_a_bus_req(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (!iotg->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '0') { - iotg->hsm.a_bus_req = 0; - dev_dbg(lnw->dev, "User request: a_bus_req = 0\n"); - } else if (buf[0] == '1') { - /* If a_bus_drop is TRUE, a_bus_req can't be set */ - if (iotg->hsm.a_bus_drop) - return -1; - iotg->hsm.a_bus_req = 1; - dev_dbg(lnw->dev, "User request: a_bus_req = 1\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req); - -static ssize_t -get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", lnw->iotg.hsm.a_bus_drop); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_a_bus_drop(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (!iotg->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '0') { - iotg->hsm.a_bus_drop = 0; - dev_dbg(lnw->dev, "User request: a_bus_drop = 0\n"); - } else if (buf[0] == '1') { - iotg->hsm.a_bus_drop = 1; - iotg->hsm.a_bus_req = 0; - dev_dbg(lnw->dev, "User request: a_bus_drop = 1\n"); - dev_dbg(lnw->dev, "User request: and a_bus_req = 0\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop); - -static ssize_t -get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", lnw->iotg.hsm.b_bus_req); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_b_bus_req(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (iotg->otg.default_a) - return -1; - - if (count > 2) - return -1; - - if (buf[0] == '0') { - iotg->hsm.b_bus_req = 0; - dev_dbg(lnw->dev, "User request: b_bus_req = 0\n"); - } else if (buf[0] == '1') { - iotg->hsm.b_bus_req = 1; - dev_dbg(lnw->dev, "User request: b_bus_req = 1\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req); - -static ssize_t -set_a_clr_err(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (!iotg->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '1') { - iotg->hsm.a_clr_err = 1; - dev_dbg(lnw->dev, "User request: a_clr_err = 1\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err); - -static struct attribute *inputs_attrs[] = { - &dev_attr_a_bus_req.attr, - &dev_attr_a_bus_drop.attr, - &dev_attr_b_bus_req.attr, - &dev_attr_a_clr_err.attr, - NULL, -}; - -static struct attribute_group debug_dev_attr_group = { - .name = "inputs", - .attrs = inputs_attrs, -}; - -static int langwell_otg_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - unsigned long resource, len; - void __iomem *base = NULL; - int retval; - u32 val32; - struct langwell_otg *lnw; - char qname[] = "langwell_otg_queue"; - - retval = 0; - dev_dbg(&pdev->dev, "\notg controller is detected.\n"); - if (pci_enable_device(pdev) < 0) { - retval = -ENODEV; - goto done; - } - - lnw = kzalloc(sizeof *lnw, GFP_KERNEL); - if (lnw == NULL) { - retval = -ENOMEM; - goto done; - } - the_transceiver = lnw; - - /* control register: BAR 0 */ - resource = pci_resource_start(pdev, 0); - len = pci_resource_len(pdev, 0); - if (!request_mem_region(resource, len, driver_name)) { - retval = -EBUSY; - goto err; - } - lnw->region = 1; - - base = ioremap_nocache(resource, len); - if (base == NULL) { - retval = -EFAULT; - goto err; - } - lnw->iotg.base = base; - - if (!request_mem_region(USBCFG_ADDR, USBCFG_LEN, driver_name)) { - retval = -EBUSY; - goto err; - } - lnw->cfg_region = 1; - - /* For the SCCB.USBCFG register */ - base = ioremap_nocache(USBCFG_ADDR, USBCFG_LEN); - if (base == NULL) { - retval = -EFAULT; - goto err; - } - lnw->usbcfg = base; - - if (!pdev->irq) { - dev_dbg(&pdev->dev, "No IRQ.\n"); - retval = -ENODEV; - goto err; - } - - lnw->qwork = create_singlethread_workqueue(qname); - if (!lnw->qwork) { - dev_dbg(&pdev->dev, "cannot create workqueue %s\n", qname); - retval = -ENOMEM; - goto err; - } - INIT_WORK(&lnw->work, langwell_otg_work); - - /* OTG common part */ - lnw->dev = &pdev->dev; - lnw->iotg.otg.dev = lnw->dev; - lnw->iotg.otg.label = driver_name; - lnw->iotg.otg.set_host = langwell_otg_set_host; - lnw->iotg.otg.set_peripheral = langwell_otg_set_peripheral; - lnw->iotg.otg.set_power = langwell_otg_set_power; - lnw->iotg.otg.set_vbus = langwell_otg_set_vbus; - lnw->iotg.otg.start_srp = langwell_otg_start_srp; - lnw->iotg.otg.state = OTG_STATE_UNDEFINED; - - if (otg_set_transceiver(&lnw->iotg.otg)) { - dev_dbg(lnw->dev, "can't set transceiver\n"); - retval = -EBUSY; - goto err; - } - - reset_otg(); - init_hsm(); - - spin_lock_init(&lnw->lock); - spin_lock_init(&lnw->wq_lock); - INIT_LIST_HEAD(&active_timers); - retval = langwell_otg_init_timers(&lnw->iotg.hsm); - if (retval) { - dev_dbg(&pdev->dev, "Failed to init timers\n"); - goto err; - } - - init_timer(&lnw->hsm_timer); - ATOMIC_INIT_NOTIFIER_HEAD(&lnw->iotg.iotg_notifier); - - lnw->iotg_notifier.notifier_call = langwell_otg_iotg_notify; - - retval = intel_mid_otg_register_notifier(&lnw->iotg, - &lnw->iotg_notifier); - if (retval) { - dev_dbg(lnw->dev, "Failed to register notifier\n"); - goto err; - } - - if (request_irq(pdev->irq, otg_irq, IRQF_SHARED, - driver_name, lnw) != 0) { - dev_dbg(lnw->dev, "request interrupt %d failed\n", pdev->irq); - retval = -EBUSY; - goto err; - } - - /* enable OTGSC int */ - val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE | - OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU; - writel(val32, lnw->iotg.base + CI_OTGSC); - - retval = device_create_file(&pdev->dev, &dev_attr_registers); - if (retval < 0) { - dev_dbg(lnw->dev, - "Can't register sysfs attribute: %d\n", retval); - goto err; - } - - retval = device_create_file(&pdev->dev, &dev_attr_hsm); - if (retval < 0) { - dev_dbg(lnw->dev, "Can't hsm sysfs attribute: %d\n", retval); - goto err; - } - - retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group); - if (retval < 0) { - dev_dbg(lnw->dev, - "Can't register sysfs attr group: %d\n", retval); - goto err; - } - - if (lnw->iotg.otg.state == OTG_STATE_A_IDLE) - langwell_update_transceiver(); - - return 0; - -err: - if (the_transceiver) - langwell_otg_remove(pdev); -done: - return retval; -} - -static void langwell_otg_remove(struct pci_dev *pdev) -{ - struct langwell_otg *lnw = the_transceiver; - - if (lnw->qwork) { - flush_workqueue(lnw->qwork); - destroy_workqueue(lnw->qwork); - } - intel_mid_otg_unregister_notifier(&lnw->iotg, &lnw->iotg_notifier); - langwell_otg_free_timers(); - - /* disable OTGSC interrupt as OTGSC doesn't change in reset */ - writel(0, lnw->iotg.base + CI_OTGSC); - - if (pdev->irq) - free_irq(pdev->irq, lnw); - if (lnw->usbcfg) - iounmap(lnw->usbcfg); - if (lnw->cfg_region) - release_mem_region(USBCFG_ADDR, USBCFG_LEN); - if (lnw->iotg.base) - iounmap(lnw->iotg.base); - if (lnw->region) - release_mem_region(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - - otg_set_transceiver(NULL); - pci_disable_device(pdev); - sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group); - device_remove_file(&pdev->dev, &dev_attr_hsm); - device_remove_file(&pdev->dev, &dev_attr_registers); - kfree(lnw); - lnw = NULL; -} - -static void transceiver_suspend(struct pci_dev *pdev) -{ - pci_save_state(pdev); - pci_set_power_state(pdev, PCI_D3hot); - langwell_otg_phy_low_power(1); -} - -static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - int ret = 0; - - /* Disbale OTG interrupts */ - langwell_otg_intr(0); - - if (pdev->irq) - free_irq(pdev->irq, lnw); - - /* Prevent more otg_work */ - flush_workqueue(lnw->qwork); - destroy_workqueue(lnw->qwork); - lnw->qwork = NULL; - - /* start actions */ - switch (iotg->otg.state) { - case OTG_STATE_A_WAIT_VFALL: - iotg->otg.state = OTG_STATE_A_IDLE; - case OTG_STATE_A_IDLE: - case OTG_STATE_B_IDLE: - case OTG_STATE_A_VBUS_ERR: - transceiver_suspend(pdev); - break; - case OTG_STATE_A_WAIT_VRISE: - langwell_otg_del_timer(a_wait_vrise_tmr); - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_WAIT_BCON: - del_timer_sync(&lnw->hsm_timer); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_HOST: - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_SUSPEND: - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, "host driver has been removed.\n"); - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_PERIPHERAL: - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(&pdev->dev, - "client driver has been removed.\n"); - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_B_HOST: - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - iotg->hsm.b_bus_req = 0; - iotg->otg.state = OTG_STATE_B_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_B_PERIPHERAL: - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(&pdev->dev, - "client driver has been removed.\n"); - iotg->otg.state = OTG_STATE_B_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_B_WAIT_ACON: - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - langwell_otg_HAAR(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - iotg->hsm.b_bus_req = 0; - iotg->otg.state = OTG_STATE_B_IDLE; - transceiver_suspend(pdev); - break; - default: - dev_dbg(lnw->dev, "error state before suspend\n"); - break; - } - - return ret; -} - -static void transceiver_resume(struct pci_dev *pdev) -{ - pci_restore_state(pdev); - pci_set_power_state(pdev, PCI_D0); -} - -static int langwell_otg_resume(struct pci_dev *pdev) -{ - struct langwell_otg *lnw = the_transceiver; - int ret = 0; - - transceiver_resume(pdev); - - lnw->qwork = create_singlethread_workqueue("langwell_otg_queue"); - if (!lnw->qwork) { - dev_dbg(&pdev->dev, "cannot create langwell otg workqueuen"); - ret = -ENOMEM; - goto error; - } - - if (request_irq(pdev->irq, otg_irq, IRQF_SHARED, - driver_name, lnw) != 0) { - dev_dbg(&pdev->dev, "request interrupt %d failed\n", pdev->irq); - ret = -EBUSY; - goto error; - } - - /* enable OTG interrupts */ - langwell_otg_intr(1); - - update_hsm(); - - langwell_update_transceiver(); - - return ret; -error: - langwell_otg_intr(0); - transceiver_suspend(pdev); - return ret; -} - -static int __init langwell_otg_init(void) -{ - return pci_register_driver(&otg_pci_driver); -} -module_init(langwell_otg_init); - -static void __exit langwell_otg_cleanup(void) -{ - pci_unregister_driver(&otg_pci_driver); -} -module_exit(langwell_otg_cleanup); diff --git a/drivers/usb/otg/msm_otg.c b/drivers/usb/otg/msm_otg.c deleted file mode 100644 index 296598628b8..00000000000 --- a/drivers/usb/otg/msm_otg.c +++ /dev/null @@ -1,1124 +0,0 @@ -/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - */ - -#include <linux/module.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/err.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/ioport.h> -#include <linux/uaccess.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/pm_runtime.h> - -#include <linux/usb.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/usb/gadget.h> -#include <linux/usb/hcd.h> -#include <linux/usb/msm_hsusb.h> -#include <linux/usb/msm_hsusb_hw.h> - -#include <mach/clk.h> - -#define MSM_USB_BASE (motg->regs) -#define DRIVER_NAME "msm_otg" - -#define ULPI_IO_TIMEOUT_USEC (10 * 1000) -static int ulpi_read(struct otg_transceiver *otg, u32 reg) -{ - struct msm_otg *motg = container_of(otg, struct msm_otg, otg); - int cnt = 0; - - /* initiate read operation */ - writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg), - USB_ULPI_VIEWPORT); - - /* wait for completion */ - while (cnt < ULPI_IO_TIMEOUT_USEC) { - if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN)) - break; - udelay(1); - cnt++; - } - - if (cnt >= ULPI_IO_TIMEOUT_USEC) { - dev_err(otg->dev, "ulpi_read: timeout %08x\n", - readl(USB_ULPI_VIEWPORT)); - return -ETIMEDOUT; - } - return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT)); -} - -static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg) -{ - struct msm_otg *motg = container_of(otg, struct msm_otg, otg); - int cnt = 0; - - /* initiate write operation */ - writel(ULPI_RUN | ULPI_WRITE | - ULPI_ADDR(reg) | ULPI_DATA(val), - USB_ULPI_VIEWPORT); - - /* wait for completion */ - while (cnt < ULPI_IO_TIMEOUT_USEC) { - if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN)) - break; - udelay(1); - cnt++; - } - - if (cnt >= ULPI_IO_TIMEOUT_USEC) { - dev_err(otg->dev, "ulpi_write: timeout\n"); - return -ETIMEDOUT; - } - return 0; -} - -static struct otg_io_access_ops msm_otg_io_ops = { - .read = ulpi_read, - .write = ulpi_write, -}; - -static void ulpi_init(struct msm_otg *motg) -{ - struct msm_otg_platform_data *pdata = motg->pdata; - int *seq = pdata->phy_init_seq; - - if (!seq) - return; - - while (seq[0] >= 0) { - dev_vdbg(motg->otg.dev, "ulpi: write 0x%02x to 0x%02x\n", - seq[0], seq[1]); - ulpi_write(&motg->otg, seq[0], seq[1]); - seq += 2; - } -} - -static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert) -{ - int ret; - - if (assert) { - ret = clk_reset(motg->clk, CLK_RESET_ASSERT); - if (ret) - dev_err(motg->otg.dev, "usb hs_clk assert failed\n"); - } else { - ret = clk_reset(motg->clk, CLK_RESET_DEASSERT); - if (ret) - dev_err(motg->otg.dev, "usb hs_clk deassert failed\n"); - } - return ret; -} - -static int msm_otg_phy_clk_reset(struct msm_otg *motg) -{ - int ret; - - ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT); - if (ret) { - dev_err(motg->otg.dev, "usb phy clk assert failed\n"); - return ret; - } - usleep_range(10000, 12000); - ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT); - if (ret) - dev_err(motg->otg.dev, "usb phy clk deassert failed\n"); - return ret; -} - -static int msm_otg_phy_reset(struct msm_otg *motg) -{ - u32 val; - int ret; - int retries; - - ret = msm_otg_link_clk_reset(motg, 1); - if (ret) - return ret; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - ret = msm_otg_link_clk_reset(motg, 0); - if (ret) - return ret; - - val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK; - writel(val | PORTSC_PTS_ULPI, USB_PORTSC); - - for (retries = 3; retries > 0; retries--) { - ret = ulpi_write(&motg->otg, ULPI_FUNC_CTRL_SUSPENDM, - ULPI_CLR(ULPI_FUNC_CTRL)); - if (!ret) - break; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - } - if (!retries) - return -ETIMEDOUT; - - /* This reset calibrates the phy, if the above write succeeded */ - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - - for (retries = 3; retries > 0; retries--) { - ret = ulpi_read(&motg->otg, ULPI_DEBUG); - if (ret != -ETIMEDOUT) - break; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - } - if (!retries) - return -ETIMEDOUT; - - dev_info(motg->otg.dev, "phy_reset: success\n"); - return 0; -} - -#define LINK_RESET_TIMEOUT_USEC (250 * 1000) -static int msm_otg_reset(struct otg_transceiver *otg) -{ - struct msm_otg *motg = container_of(otg, struct msm_otg, otg); - struct msm_otg_platform_data *pdata = motg->pdata; - int cnt = 0; - int ret; - u32 val = 0; - u32 ulpi_val = 0; - - ret = msm_otg_phy_reset(motg); - if (ret) { - dev_err(otg->dev, "phy_reset failed\n"); - return ret; - } - - ulpi_init(motg); - - writel(USBCMD_RESET, USB_USBCMD); - while (cnt < LINK_RESET_TIMEOUT_USEC) { - if (!(readl(USB_USBCMD) & USBCMD_RESET)) - break; - udelay(1); - cnt++; - } - if (cnt >= LINK_RESET_TIMEOUT_USEC) - return -ETIMEDOUT; - - /* select ULPI phy */ - writel(0x80000000, USB_PORTSC); - - msleep(100); - - writel(0x0, USB_AHBBURST); - writel(0x00, USB_AHBMODE); - - if (pdata->otg_control == OTG_PHY_CONTROL) { - val = readl(USB_OTGSC); - if (pdata->mode == USB_OTG) { - ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID; - val |= OTGSC_IDIE | OTGSC_BSVIE; - } else if (pdata->mode == USB_PERIPHERAL) { - ulpi_val = ULPI_INT_SESS_VALID; - val |= OTGSC_BSVIE; - } - writel(val, USB_OTGSC); - ulpi_write(otg, ulpi_val, ULPI_USB_INT_EN_RISE); - ulpi_write(otg, ulpi_val, ULPI_USB_INT_EN_FALL); - } - - return 0; -} - -#define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) -#define PHY_RESUME_TIMEOUT_USEC (100 * 1000) - -#ifdef CONFIG_PM_SLEEP -static int msm_otg_suspend(struct msm_otg *motg) -{ - struct otg_transceiver *otg = &motg->otg; - struct usb_bus *bus = otg->host; - struct msm_otg_platform_data *pdata = motg->pdata; - int cnt = 0; - - if (atomic_read(&motg->in_lpm)) - return 0; - - disable_irq(motg->irq); - /* - * Interrupt Latch Register auto-clear feature is not present - * in all PHY versions. Latch register is clear on read type. - * Clear latch register to avoid spurious wakeup from - * low power mode (LPM). - */ - ulpi_read(otg, 0x14); - - /* - * PHY comparators are disabled when PHY enters into low power - * mode (LPM). Keep PHY comparators ON in LPM only when we expect - * VBUS/Id notifications from USB PHY. Otherwise turn off USB - * PHY comparators. This save significant amount of power. - */ - if (pdata->otg_control == OTG_PHY_CONTROL) - ulpi_write(otg, 0x01, 0x30); - - /* - * PLL is not turned off when PHY enters into low power mode (LPM). - * Disable PLL for maximum power savings. - */ - ulpi_write(otg, 0x08, 0x09); - - /* - * PHY may take some time or even fail to enter into low power - * mode (LPM). Hence poll for 500 msec and reset the PHY and link - * in failure case. - */ - writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC); - while (cnt < PHY_SUSPEND_TIMEOUT_USEC) { - if (readl(USB_PORTSC) & PORTSC_PHCD) - break; - udelay(1); - cnt++; - } - - if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) { - dev_err(otg->dev, "Unable to suspend PHY\n"); - msm_otg_reset(otg); - enable_irq(motg->irq); - return -ETIMEDOUT; - } - - /* - * PHY has capability to generate interrupt asynchronously in low - * power mode (LPM). This interrupt is level triggered. So USB IRQ - * line must be disabled till async interrupt enable bit is cleared - * in USBCMD register. Assert STP (ULPI interface STOP signal) to - * block data communication from PHY. - */ - writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD); - - clk_disable(motg->pclk); - clk_disable(motg->clk); - if (motg->core_clk) - clk_disable(motg->core_clk); - - if (device_may_wakeup(otg->dev)) - enable_irq_wake(motg->irq); - if (bus) - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags); - - atomic_set(&motg->in_lpm, 1); - enable_irq(motg->irq); - - dev_info(otg->dev, "USB in low power mode\n"); - - return 0; -} - -static int msm_otg_resume(struct msm_otg *motg) -{ - struct otg_transceiver *otg = &motg->otg; - struct usb_bus *bus = otg->host; - int cnt = 0; - unsigned temp; - - if (!atomic_read(&motg->in_lpm)) - return 0; - - clk_enable(motg->pclk); - clk_enable(motg->clk); - if (motg->core_clk) - clk_enable(motg->core_clk); - - temp = readl(USB_USBCMD); - temp &= ~ASYNC_INTR_CTRL; - temp &= ~ULPI_STP_CTRL; - writel(temp, USB_USBCMD); - - /* - * PHY comes out of low power mode (LPM) in case of wakeup - * from asynchronous interrupt. - */ - if (!(readl(USB_PORTSC) & PORTSC_PHCD)) - goto skip_phy_resume; - - writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC); - while (cnt < PHY_RESUME_TIMEOUT_USEC) { - if (!(readl(USB_PORTSC) & PORTSC_PHCD)) - break; - udelay(1); - cnt++; - } - - if (cnt >= PHY_RESUME_TIMEOUT_USEC) { - /* - * This is a fatal error. Reset the link and - * PHY. USB state can not be restored. Re-insertion - * of USB cable is the only way to get USB working. - */ - dev_err(otg->dev, "Unable to resume USB." - "Re-plugin the cable\n"); - msm_otg_reset(otg); - } - -skip_phy_resume: - if (device_may_wakeup(otg->dev)) - disable_irq_wake(motg->irq); - if (bus) - set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags); - - if (motg->async_int) { - motg->async_int = 0; - pm_runtime_put(otg->dev); - enable_irq(motg->irq); - } - - atomic_set(&motg->in_lpm, 0); - - dev_info(otg->dev, "USB exited from low power mode\n"); - - return 0; -} -#endif - -static void msm_otg_start_host(struct otg_transceiver *otg, int on) -{ - struct msm_otg *motg = container_of(otg, struct msm_otg, otg); - struct msm_otg_platform_data *pdata = motg->pdata; - struct usb_hcd *hcd; - - if (!otg->host) - return; - - hcd = bus_to_hcd(otg->host); - - if (on) { - dev_dbg(otg->dev, "host on\n"); - - if (pdata->vbus_power) - pdata->vbus_power(1); - /* - * Some boards have a switch cotrolled by gpio - * to enable/disable internal HUB. Enable internal - * HUB before kicking the host. - */ - if (pdata->setup_gpio) - pdata->setup_gpio(OTG_STATE_A_HOST); -#ifdef CONFIG_USB - usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); -#endif - } else { - dev_dbg(otg->dev, "host off\n"); - -#ifdef CONFIG_USB - usb_remove_hcd(hcd); -#endif - if (pdata->setup_gpio) - pdata->setup_gpio(OTG_STATE_UNDEFINED); - if (pdata->vbus_power) - pdata->vbus_power(0); - } -} - -static int msm_otg_set_host(struct otg_transceiver *otg, struct usb_bus *host) -{ - struct msm_otg *motg = container_of(otg, struct msm_otg, otg); - struct usb_hcd *hcd; - - /* - * Fail host registration if this board can support - * only peripheral configuration. - */ - if (motg->pdata->mode == USB_PERIPHERAL) { - dev_info(otg->dev, "Host mode is not supported\n"); - return -ENODEV; - } - - if (!host) { - if (otg->state == OTG_STATE_A_HOST) { - pm_runtime_get_sync(otg->dev); - msm_otg_start_host(otg, 0); - otg->host = NULL; - otg->state = OTG_STATE_UNDEFINED; - schedule_work(&motg->sm_work); - } else { - otg->host = NULL; - } - - return 0; - } - - hcd = bus_to_hcd(host); - hcd->power_budget = motg->pdata->power_budget; - - otg->host = host; - dev_dbg(otg->dev, "host driver registered w/ tranceiver\n"); - - /* - * Kick the state machine work, if peripheral is not supported - * or peripheral is already registered with us. - */ - if (motg->pdata->mode == USB_HOST || otg->gadget) { - pm_runtime_get_sync(otg->dev); - schedule_work(&motg->sm_work); - } - - return 0; -} - -static void msm_otg_start_peripheral(struct otg_transceiver *otg, int on) -{ - struct msm_otg *motg = container_of(otg, struct msm_otg, otg); - struct msm_otg_platform_data *pdata = motg->pdata; - - if (!otg->gadget) - return; - - if (on) { - dev_dbg(otg->dev, "gadget on\n"); - /* - * Some boards have a switch cotrolled by gpio - * to enable/disable internal HUB. Disable internal - * HUB before kicking the gadget. - */ - if (pdata->setup_gpio) - pdata->setup_gpio(OTG_STATE_B_PERIPHERAL); - usb_gadget_vbus_connect(otg->gadget); - } else { - dev_dbg(otg->dev, "gadget off\n"); - usb_gadget_vbus_disconnect(otg->gadget); - if (pdata->setup_gpio) - pdata->setup_gpio(OTG_STATE_UNDEFINED); - } - -} - -static int msm_otg_set_peripheral(struct otg_transceiver *otg, - struct usb_gadget *gadget) -{ - struct msm_otg *motg = container_of(otg, struct msm_otg, otg); - - /* - * Fail peripheral registration if this board can support - * only host configuration. - */ - if (motg->pdata->mode == USB_HOST) { - dev_info(otg->dev, "Peripheral mode is not supported\n"); - return -ENODEV; - } - - if (!gadget) { - if (otg->state == OTG_STATE_B_PERIPHERAL) { - pm_runtime_get_sync(otg->dev); - msm_otg_start_peripheral(otg, 0); - otg->gadget = NULL; - otg->state = OTG_STATE_UNDEFINED; - schedule_work(&motg->sm_work); - } else { - otg->gadget = NULL; - } - - return 0; - } - otg->gadget = gadget; - dev_dbg(otg->dev, "peripheral driver registered w/ tranceiver\n"); - - /* - * Kick the state machine work, if host is not supported - * or host is already registered with us. - */ - if (motg->pdata->mode == USB_PERIPHERAL || otg->host) { - pm_runtime_get_sync(otg->dev); - schedule_work(&motg->sm_work); - } - - return 0; -} - -/* - * We support OTG, Peripheral only and Host only configurations. In case - * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen - * via Id pin status or user request (debugfs). Id/BSV interrupts are not - * enabled when switch is controlled by user and default mode is supplied - * by board file, which can be changed by userspace later. - */ -static void msm_otg_init_sm(struct msm_otg *motg) -{ - struct msm_otg_platform_data *pdata = motg->pdata; - u32 otgsc = readl(USB_OTGSC); - - switch (pdata->mode) { - case USB_OTG: - if (pdata->otg_control == OTG_PHY_CONTROL) { - if (otgsc & OTGSC_ID) - set_bit(ID, &motg->inputs); - else - clear_bit(ID, &motg->inputs); - - if (otgsc & OTGSC_BSV) - set_bit(B_SESS_VLD, &motg->inputs); - else - clear_bit(B_SESS_VLD, &motg->inputs); - } else if (pdata->otg_control == OTG_USER_CONTROL) { - if (pdata->default_mode == USB_HOST) { - clear_bit(ID, &motg->inputs); - } else if (pdata->default_mode == USB_PERIPHERAL) { - set_bit(ID, &motg->inputs); - set_bit(B_SESS_VLD, &motg->inputs); - } else { - set_bit(ID, &motg->inputs); - clear_bit(B_SESS_VLD, &motg->inputs); - } - } - break; - case USB_HOST: - clear_bit(ID, &motg->inputs); - break; - case USB_PERIPHERAL: - set_bit(ID, &motg->inputs); - if (otgsc & OTGSC_BSV) - set_bit(B_SESS_VLD, &motg->inputs); - else - clear_bit(B_SESS_VLD, &motg->inputs); - break; - default: - break; - } -} - -static void msm_otg_sm_work(struct work_struct *w) -{ - struct msm_otg *motg = container_of(w, struct msm_otg, sm_work); - struct otg_transceiver *otg = &motg->otg; - - switch (otg->state) { - case OTG_STATE_UNDEFINED: - dev_dbg(otg->dev, "OTG_STATE_UNDEFINED state\n"); - msm_otg_reset(otg); - msm_otg_init_sm(motg); - otg->state = OTG_STATE_B_IDLE; - /* FALL THROUGH */ - case OTG_STATE_B_IDLE: - dev_dbg(otg->dev, "OTG_STATE_B_IDLE state\n"); - if (!test_bit(ID, &motg->inputs) && otg->host) { - /* disable BSV bit */ - writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC); - msm_otg_start_host(otg, 1); - otg->state = OTG_STATE_A_HOST; - } else if (test_bit(B_SESS_VLD, &motg->inputs) && otg->gadget) { - msm_otg_start_peripheral(otg, 1); - otg->state = OTG_STATE_B_PERIPHERAL; - } - pm_runtime_put_sync(otg->dev); - break; - case OTG_STATE_B_PERIPHERAL: - dev_dbg(otg->dev, "OTG_STATE_B_PERIPHERAL state\n"); - if (!test_bit(B_SESS_VLD, &motg->inputs) || - !test_bit(ID, &motg->inputs)) { - msm_otg_start_peripheral(otg, 0); - otg->state = OTG_STATE_B_IDLE; - msm_otg_reset(otg); - schedule_work(w); - } - break; - case OTG_STATE_A_HOST: - dev_dbg(otg->dev, "OTG_STATE_A_HOST state\n"); - if (test_bit(ID, &motg->inputs)) { - msm_otg_start_host(otg, 0); - otg->state = OTG_STATE_B_IDLE; - msm_otg_reset(otg); - schedule_work(w); - } - break; - default: - break; - } -} - -static irqreturn_t msm_otg_irq(int irq, void *data) -{ - struct msm_otg *motg = data; - struct otg_transceiver *otg = &motg->otg; - u32 otgsc = 0; - - if (atomic_read(&motg->in_lpm)) { - disable_irq_nosync(irq); - motg->async_int = 1; - pm_runtime_get(otg->dev); - return IRQ_HANDLED; - } - - otgsc = readl(USB_OTGSC); - if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS))) - return IRQ_NONE; - - if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) { - if (otgsc & OTGSC_ID) - set_bit(ID, &motg->inputs); - else - clear_bit(ID, &motg->inputs); - dev_dbg(otg->dev, "ID set/clear\n"); - pm_runtime_get_noresume(otg->dev); - } else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) { - if (otgsc & OTGSC_BSV) - set_bit(B_SESS_VLD, &motg->inputs); - else - clear_bit(B_SESS_VLD, &motg->inputs); - dev_dbg(otg->dev, "BSV set/clear\n"); - pm_runtime_get_noresume(otg->dev); - } - - writel(otgsc, USB_OTGSC); - schedule_work(&motg->sm_work); - return IRQ_HANDLED; -} - -static int msm_otg_mode_show(struct seq_file *s, void *unused) -{ - struct msm_otg *motg = s->private; - struct otg_transceiver *otg = &motg->otg; - - switch (otg->state) { - case OTG_STATE_A_HOST: - seq_printf(s, "host\n"); - break; - case OTG_STATE_B_PERIPHERAL: - seq_printf(s, "peripheral\n"); - break; - default: - seq_printf(s, "none\n"); - break; - } - - return 0; -} - -static int msm_otg_mode_open(struct inode *inode, struct file *file) -{ - return single_open(file, msm_otg_mode_show, inode->i_private); -} - -static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, - size_t count, loff_t *ppos) -{ - struct seq_file *s = file->private_data; - struct msm_otg *motg = s->private; - char buf[16]; - struct otg_transceiver *otg = &motg->otg; - int status = count; - enum usb_mode_type req_mode; - - memset(buf, 0x00, sizeof(buf)); - - if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) { - status = -EFAULT; - goto out; - } - - if (!strncmp(buf, "host", 4)) { - req_mode = USB_HOST; - } else if (!strncmp(buf, "peripheral", 10)) { - req_mode = USB_PERIPHERAL; - } else if (!strncmp(buf, "none", 4)) { - req_mode = USB_NONE; - } else { - status = -EINVAL; - goto out; - } - - switch (req_mode) { - case USB_NONE: - switch (otg->state) { - case OTG_STATE_A_HOST: - case OTG_STATE_B_PERIPHERAL: - set_bit(ID, &motg->inputs); - clear_bit(B_SESS_VLD, &motg->inputs); - break; - default: - goto out; - } - break; - case USB_PERIPHERAL: - switch (otg->state) { - case OTG_STATE_B_IDLE: - case OTG_STATE_A_HOST: - set_bit(ID, &motg->inputs); - set_bit(B_SESS_VLD, &motg->inputs); - break; - default: - goto out; - } - break; - case USB_HOST: - switch (otg->state) { - case OTG_STATE_B_IDLE: - case OTG_STATE_B_PERIPHERAL: - clear_bit(ID, &motg->inputs); - break; - default: - goto out; - } - break; - default: - goto out; - } - - pm_runtime_get_sync(otg->dev); - schedule_work(&motg->sm_work); -out: - return status; -} - -const struct file_operations msm_otg_mode_fops = { - .open = msm_otg_mode_open, - .read = seq_read, - .write = msm_otg_mode_write, - .llseek = seq_lseek, - .release = single_release, -}; - -static struct dentry *msm_otg_dbg_root; -static struct dentry *msm_otg_dbg_mode; - -static int msm_otg_debugfs_init(struct msm_otg *motg) -{ - msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL); - - if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root)) - return -ENODEV; - - msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR, - msm_otg_dbg_root, motg, &msm_otg_mode_fops); - if (!msm_otg_dbg_mode) { - debugfs_remove(msm_otg_dbg_root); - msm_otg_dbg_root = NULL; - return -ENODEV; - } - - return 0; -} - -static void msm_otg_debugfs_cleanup(void) -{ - debugfs_remove(msm_otg_dbg_mode); - debugfs_remove(msm_otg_dbg_root); -} - -static int __init msm_otg_probe(struct platform_device *pdev) -{ - int ret = 0; - struct resource *res; - struct msm_otg *motg; - struct otg_transceiver *otg; - - dev_info(&pdev->dev, "msm_otg probe\n"); - if (!pdev->dev.platform_data) { - dev_err(&pdev->dev, "No platform data given. Bailing out\n"); - return -ENODEV; - } - - motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL); - if (!motg) { - dev_err(&pdev->dev, "unable to allocate msm_otg\n"); - return -ENOMEM; - } - - motg->pdata = pdev->dev.platform_data; - otg = &motg->otg; - otg->dev = &pdev->dev; - - motg->phy_reset_clk = clk_get(&pdev->dev, "usb_phy_clk"); - if (IS_ERR(motg->phy_reset_clk)) { - dev_err(&pdev->dev, "failed to get usb_phy_clk\n"); - ret = PTR_ERR(motg->phy_reset_clk); - goto free_motg; - } - - motg->clk = clk_get(&pdev->dev, "usb_hs_clk"); - if (IS_ERR(motg->clk)) { - dev_err(&pdev->dev, "failed to get usb_hs_clk\n"); - ret = PTR_ERR(motg->clk); - goto put_phy_reset_clk; - } - - motg->pclk = clk_get(&pdev->dev, "usb_hs_pclk"); - if (IS_ERR(motg->pclk)) { - dev_err(&pdev->dev, "failed to get usb_hs_pclk\n"); - ret = PTR_ERR(motg->pclk); - goto put_clk; - } - - /* - * USB core clock is not present on all MSM chips. This - * clock is introduced to remove the dependency on AXI - * bus frequency. - */ - motg->core_clk = clk_get(&pdev->dev, "usb_hs_core_clk"); - if (IS_ERR(motg->core_clk)) - motg->core_clk = NULL; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get platform resource mem\n"); - ret = -ENODEV; - goto put_core_clk; - } - - motg->regs = ioremap(res->start, resource_size(res)); - if (!motg->regs) { - dev_err(&pdev->dev, "ioremap failed\n"); - ret = -ENOMEM; - goto put_core_clk; - } - dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs); - - motg->irq = platform_get_irq(pdev, 0); - if (!motg->irq) { - dev_err(&pdev->dev, "platform_get_irq failed\n"); - ret = -ENODEV; - goto free_regs; - } - - clk_enable(motg->clk); - clk_enable(motg->pclk); - if (motg->core_clk) - clk_enable(motg->core_clk); - - writel(0, USB_USBINTR); - writel(0, USB_OTGSC); - - INIT_WORK(&motg->sm_work, msm_otg_sm_work); - ret = request_irq(motg->irq, msm_otg_irq, IRQF_SHARED, - "msm_otg", motg); - if (ret) { - dev_err(&pdev->dev, "request irq failed\n"); - goto disable_clks; - } - - otg->init = msm_otg_reset; - otg->set_host = msm_otg_set_host; - otg->set_peripheral = msm_otg_set_peripheral; - - otg->io_ops = &msm_otg_io_ops; - - ret = otg_set_transceiver(&motg->otg); - if (ret) { - dev_err(&pdev->dev, "otg_set_transceiver failed\n"); - goto free_irq; - } - - platform_set_drvdata(pdev, motg); - device_init_wakeup(&pdev->dev, 1); - - if (motg->pdata->mode == USB_OTG && - motg->pdata->otg_control == OTG_USER_CONTROL) { - ret = msm_otg_debugfs_init(motg); - if (ret) - dev_dbg(&pdev->dev, "mode debugfs file is" - "not available\n"); - } - - pm_runtime_set_active(&pdev->dev); - pm_runtime_enable(&pdev->dev); - - return 0; -free_irq: - free_irq(motg->irq, motg); -disable_clks: - clk_disable(motg->pclk); - clk_disable(motg->clk); -free_regs: - iounmap(motg->regs); -put_core_clk: - if (motg->core_clk) - clk_put(motg->core_clk); - clk_put(motg->pclk); -put_clk: - clk_put(motg->clk); -put_phy_reset_clk: - clk_put(motg->phy_reset_clk); -free_motg: - kfree(motg); - return ret; -} - -static int __devexit msm_otg_remove(struct platform_device *pdev) -{ - struct msm_otg *motg = platform_get_drvdata(pdev); - struct otg_transceiver *otg = &motg->otg; - int cnt = 0; - - if (otg->host || otg->gadget) - return -EBUSY; - - msm_otg_debugfs_cleanup(); - cancel_work_sync(&motg->sm_work); - - pm_runtime_resume(&pdev->dev); - - device_init_wakeup(&pdev->dev, 0); - pm_runtime_disable(&pdev->dev); - - otg_set_transceiver(NULL); - free_irq(motg->irq, motg); - - /* - * Put PHY in low power mode. - */ - ulpi_read(otg, 0x14); - ulpi_write(otg, 0x08, 0x09); - - writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC); - while (cnt < PHY_SUSPEND_TIMEOUT_USEC) { - if (readl(USB_PORTSC) & PORTSC_PHCD) - break; - udelay(1); - cnt++; - } - if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) - dev_err(otg->dev, "Unable to suspend PHY\n"); - - clk_disable(motg->pclk); - clk_disable(motg->clk); - if (motg->core_clk) - clk_disable(motg->core_clk); - - iounmap(motg->regs); - pm_runtime_set_suspended(&pdev->dev); - - clk_put(motg->phy_reset_clk); - clk_put(motg->pclk); - clk_put(motg->clk); - if (motg->core_clk) - clk_put(motg->core_clk); - - kfree(motg); - - return 0; -} - -#ifdef CONFIG_PM_RUNTIME -static int msm_otg_runtime_idle(struct device *dev) -{ - struct msm_otg *motg = dev_get_drvdata(dev); - struct otg_transceiver *otg = &motg->otg; - - dev_dbg(dev, "OTG runtime idle\n"); - - /* - * It is observed some times that a spurious interrupt - * comes when PHY is put into LPM immediately after PHY reset. - * This 1 sec delay also prevents entering into LPM immediately - * after asynchronous interrupt. - */ - if (otg->state != OTG_STATE_UNDEFINED) - pm_schedule_suspend(dev, 1000); - - return -EAGAIN; -} - -static int msm_otg_runtime_suspend(struct device *dev) -{ - struct msm_otg *motg = dev_get_drvdata(dev); - - dev_dbg(dev, "OTG runtime suspend\n"); - return msm_otg_suspend(motg); -} - -static int msm_otg_runtime_resume(struct device *dev) -{ - struct msm_otg *motg = dev_get_drvdata(dev); - - dev_dbg(dev, "OTG runtime resume\n"); - return msm_otg_resume(motg); -} -#endif - -#ifdef CONFIG_PM_SLEEP -static int msm_otg_pm_suspend(struct device *dev) -{ - struct msm_otg *motg = dev_get_drvdata(dev); - - dev_dbg(dev, "OTG PM suspend\n"); - return msm_otg_suspend(motg); -} - -static int msm_otg_pm_resume(struct device *dev) -{ - struct msm_otg *motg = dev_get_drvdata(dev); - int ret; - - dev_dbg(dev, "OTG PM resume\n"); - - ret = msm_otg_resume(motg); - if (ret) - return ret; - - /* - * Runtime PM Documentation recommends bringing the - * device to full powered state upon resume. - */ - pm_runtime_disable(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - - return 0; -} -#endif - -#ifdef CONFIG_PM -static const struct dev_pm_ops msm_otg_dev_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume) - SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume, - msm_otg_runtime_idle) -}; -#endif - -static struct platform_driver msm_otg_driver = { - .remove = __devexit_p(msm_otg_remove), - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, -#ifdef CONFIG_PM - .pm = &msm_otg_dev_pm_ops, -#endif - }, -}; - -static int __init msm_otg_init(void) -{ - return platform_driver_probe(&msm_otg_driver, msm_otg_probe); -} - -static void __exit msm_otg_exit(void) -{ - platform_driver_unregister(&msm_otg_driver); -} - -module_init(msm_otg_init); -module_exit(msm_otg_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("MSM USB transceiver driver"); diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c deleted file mode 100644 index c1e36004643..00000000000 --- a/drivers/usb/otg/nop-usb-xceiv.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * drivers/usb/otg/nop-usb-xceiv.c - * - * NOP USB transceiver for all USB transceiver which are either built-in - * into USB IP or which are mostly autonomous. - * - * Copyright (C) 2009 Texas Instruments Inc - * Author: Ajay Kumar Gupta <ajay.gupta@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Current status: - * This provides a "nop" transceiver for PHYs which are - * autonomous such as isp1504, isp1707, etc. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/usb/otg.h> -#include <linux/slab.h> - -struct nop_usb_xceiv { - struct otg_transceiver otg; - struct device *dev; -}; - -static struct platform_device *pd; - -void usb_nop_xceiv_register(void) -{ - if (pd) - return; - pd = platform_device_register_simple("nop_usb_xceiv", -1, NULL, 0); - if (!pd) { - printk(KERN_ERR "Unable to register usb nop transceiver\n"); - return; - } -} -EXPORT_SYMBOL(usb_nop_xceiv_register); - -void usb_nop_xceiv_unregister(void) -{ - platform_device_unregister(pd); - pd = NULL; -} -EXPORT_SYMBOL(usb_nop_xceiv_unregister); - -static inline struct nop_usb_xceiv *xceiv_to_nop(struct otg_transceiver *x) -{ - return container_of(x, struct nop_usb_xceiv, otg); -} - -static int nop_set_suspend(struct otg_transceiver *x, int suspend) -{ - return 0; -} - -static int nop_set_peripheral(struct otg_transceiver *x, - struct usb_gadget *gadget) -{ - struct nop_usb_xceiv *nop; - - if (!x) - return -ENODEV; - - nop = xceiv_to_nop(x); - - if (!gadget) { - nop->otg.gadget = NULL; - return -ENODEV; - } - - nop->otg.gadget = gadget; - nop->otg.state = OTG_STATE_B_IDLE; - return 0; -} - -static int nop_set_host(struct otg_transceiver *x, struct usb_bus *host) -{ - struct nop_usb_xceiv *nop; - - if (!x) - return -ENODEV; - - nop = xceiv_to_nop(x); - - if (!host) { - nop->otg.host = NULL; - return -ENODEV; - } - - nop->otg.host = host; - return 0; -} - -static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) -{ - struct nop_usb_xceiv *nop; - int err; - - nop = kzalloc(sizeof *nop, GFP_KERNEL); - if (!nop) - return -ENOMEM; - - nop->dev = &pdev->dev; - nop->otg.dev = nop->dev; - nop->otg.label = "nop-xceiv"; - nop->otg.state = OTG_STATE_UNDEFINED; - nop->otg.set_host = nop_set_host; - nop->otg.set_peripheral = nop_set_peripheral; - nop->otg.set_suspend = nop_set_suspend; - - err = otg_set_transceiver(&nop->otg); - if (err) { - dev_err(&pdev->dev, "can't register transceiver, err: %d\n", - err); - goto exit; - } - - platform_set_drvdata(pdev, nop); - - ATOMIC_INIT_NOTIFIER_HEAD(&nop->otg.notifier); - - return 0; -exit: - kfree(nop); - return err; -} - -static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev) -{ - struct nop_usb_xceiv *nop = platform_get_drvdata(pdev); - - otg_set_transceiver(NULL); - - platform_set_drvdata(pdev, NULL); - kfree(nop); - - return 0; -} - -static struct platform_driver nop_usb_xceiv_driver = { - .probe = nop_usb_xceiv_probe, - .remove = __devexit_p(nop_usb_xceiv_remove), - .driver = { - .name = "nop_usb_xceiv", - .owner = THIS_MODULE, - }, -}; - -static int __init nop_usb_xceiv_init(void) -{ - return platform_driver_register(&nop_usb_xceiv_driver); -} -subsys_initcall(nop_usb_xceiv_init); - -static void __exit nop_usb_xceiv_exit(void) -{ - platform_driver_unregister(&nop_usb_xceiv_driver); -} -module_exit(nop_usb_xceiv_exit); - -MODULE_ALIAS("platform:nop_usb_xceiv"); -MODULE_AUTHOR("Texas Instruments Inc"); -MODULE_DESCRIPTION("NOP USB Transceiver driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c deleted file mode 100644 index 0a43a7db750..00000000000 --- a/drivers/usb/otg/otg.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * otg.c -- USB OTG utility code - * - * Copyright (C) 2004 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/device.h> - -#include <linux/usb/otg.h> - -static struct otg_transceiver *xceiv; - -/** - * otg_get_transceiver - find the (single) OTG transceiver - * - * Returns the transceiver driver, after getting a refcount to it; or - * null if there is no such transceiver. The caller is responsible for - * calling otg_put_transceiver() to release that count. - * - * For use by USB host and peripheral drivers. - */ -struct otg_transceiver *otg_get_transceiver(void) -{ - if (xceiv) - get_device(xceiv->dev); - return xceiv; -} -EXPORT_SYMBOL(otg_get_transceiver); - -/** - * otg_put_transceiver - release the (single) OTG transceiver - * @x: the transceiver returned by otg_get_transceiver() - * - * Releases a refcount the caller received from otg_get_transceiver(). - * - * For use by USB host and peripheral drivers. - */ -void otg_put_transceiver(struct otg_transceiver *x) -{ - if (x) - put_device(x->dev); -} -EXPORT_SYMBOL(otg_put_transceiver); - -/** - * otg_set_transceiver - declare the (single) OTG transceiver - * @x: the USB OTG transceiver to be used; or NULL - * - * This call is exclusively for use by transceiver drivers, which - * coordinate the activities of drivers for host and peripheral - * controllers, and in some cases for VBUS current regulation. - */ -int otg_set_transceiver(struct otg_transceiver *x) -{ - if (xceiv && x) - return -EBUSY; - xceiv = x; - return 0; -} -EXPORT_SYMBOL(otg_set_transceiver); diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c deleted file mode 100644 index e01b073cc48..00000000000 --- a/drivers/usb/otg/twl4030-usb.c +++ /dev/null @@ -1,718 +0,0 @@ -/* - * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller - * - * Copyright (C) 2004-2007 Texas Instruments - * Copyright (C) 2008 Nokia Corporation - * Contact: Felipe Balbi <felipe.balbi@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Current status: - * - HS USB ULPI mode works. - * - 3-pin mode support may be added in future. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/spinlock.h> -#include <linux/workqueue.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/i2c/twl.h> -#include <linux/regulator/consumer.h> -#include <linux/err.h> -#include <linux/notifier.h> -#include <linux/slab.h> - -/* Register defines */ - -#define MCPC_CTRL 0x30 -#define MCPC_CTRL_RTSOL (1 << 7) -#define MCPC_CTRL_EXTSWR (1 << 6) -#define MCPC_CTRL_EXTSWC (1 << 5) -#define MCPC_CTRL_VOICESW (1 << 4) -#define MCPC_CTRL_OUT64K (1 << 3) -#define MCPC_CTRL_RTSCTSSW (1 << 2) -#define MCPC_CTRL_HS_UART (1 << 0) - -#define MCPC_IO_CTRL 0x33 -#define MCPC_IO_CTRL_MICBIASEN (1 << 5) -#define MCPC_IO_CTRL_CTS_NPU (1 << 4) -#define MCPC_IO_CTRL_RXD_PU (1 << 3) -#define MCPC_IO_CTRL_TXDTYP (1 << 2) -#define MCPC_IO_CTRL_CTSTYP (1 << 1) -#define MCPC_IO_CTRL_RTSTYP (1 << 0) - -#define MCPC_CTRL2 0x36 -#define MCPC_CTRL2_MCPC_CK_EN (1 << 0) - -#define OTHER_FUNC_CTRL 0x80 -#define OTHER_FUNC_CTRL_BDIS_ACON_EN (1 << 4) -#define OTHER_FUNC_CTRL_FIVEWIRE_MODE (1 << 2) - -#define OTHER_IFC_CTRL 0x83 -#define OTHER_IFC_CTRL_OE_INT_EN (1 << 6) -#define OTHER_IFC_CTRL_CEA2011_MODE (1 << 5) -#define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN (1 << 4) -#define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT (1 << 3) -#define OTHER_IFC_CTRL_HIZ_ULPI (1 << 2) -#define OTHER_IFC_CTRL_ALT_INT_REROUTE (1 << 0) - -#define OTHER_INT_EN_RISE 0x86 -#define OTHER_INT_EN_FALL 0x89 -#define OTHER_INT_STS 0x8C -#define OTHER_INT_LATCH 0x8D -#define OTHER_INT_VB_SESS_VLD (1 << 7) -#define OTHER_INT_DM_HI (1 << 6) /* not valid for "latch" reg */ -#define OTHER_INT_DP_HI (1 << 5) /* not valid for "latch" reg */ -#define OTHER_INT_BDIS_ACON (1 << 3) /* not valid for "fall" regs */ -#define OTHER_INT_MANU (1 << 1) -#define OTHER_INT_ABNORMAL_STRESS (1 << 0) - -#define ID_STATUS 0x96 -#define ID_RES_FLOAT (1 << 4) -#define ID_RES_440K (1 << 3) -#define ID_RES_200K (1 << 2) -#define ID_RES_102K (1 << 1) -#define ID_RES_GND (1 << 0) - -#define POWER_CTRL 0xAC -#define POWER_CTRL_OTG_ENAB (1 << 5) - -#define OTHER_IFC_CTRL2 0xAF -#define OTHER_IFC_CTRL2_ULPI_STP_LOW (1 << 4) -#define OTHER_IFC_CTRL2_ULPI_TXEN_POL (1 << 3) -#define OTHER_IFC_CTRL2_ULPI_4PIN_2430 (1 << 2) -#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK (3 << 0) /* bits 0 and 1 */ -#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N (0 << 0) -#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N (1 << 0) - -#define REG_CTRL_EN 0xB2 -#define REG_CTRL_ERROR 0xB5 -#define ULPI_I2C_CONFLICT_INTEN (1 << 0) - -#define OTHER_FUNC_CTRL2 0xB8 -#define OTHER_FUNC_CTRL2_VBAT_TIMER_EN (1 << 0) - -/* following registers do not have separate _clr and _set registers */ -#define VBUS_DEBOUNCE 0xC0 -#define ID_DEBOUNCE 0xC1 -#define VBAT_TIMER 0xD3 -#define PHY_PWR_CTRL 0xFD -#define PHY_PWR_PHYPWD (1 << 0) -#define PHY_CLK_CTRL 0xFE -#define PHY_CLK_CTRL_CLOCKGATING_EN (1 << 2) -#define PHY_CLK_CTRL_CLK32K_EN (1 << 1) -#define REQ_PHY_DPLL_CLK (1 << 0) -#define PHY_CLK_CTRL_STS 0xFF -#define PHY_DPLL_CLK (1 << 0) - -/* In module TWL4030_MODULE_PM_MASTER */ -#define STS_HW_CONDITIONS 0x0F - -/* In module TWL4030_MODULE_PM_RECEIVER */ -#define VUSB_DEDICATED1 0x7D -#define VUSB_DEDICATED2 0x7E -#define VUSB1V5_DEV_GRP 0x71 -#define VUSB1V5_TYPE 0x72 -#define VUSB1V5_REMAP 0x73 -#define VUSB1V8_DEV_GRP 0x74 -#define VUSB1V8_TYPE 0x75 -#define VUSB1V8_REMAP 0x76 -#define VUSB3V1_DEV_GRP 0x77 -#define VUSB3V1_TYPE 0x78 -#define VUSB3V1_REMAP 0x79 - -/* In module TWL4030_MODULE_INTBR */ -#define PMBR1 0x0D -#define GPIO_USB_4PIN_ULPI_2430C (3 << 0) - -struct twl4030_usb { - struct otg_transceiver otg; - struct device *dev; - - /* TWL4030 internal USB regulator supplies */ - struct regulator *usb1v5; - struct regulator *usb1v8; - struct regulator *usb3v1; - - /* for vbus reporting with irqs disabled */ - spinlock_t lock; - - /* pin configuration */ - enum twl4030_usb_mode usb_mode; - - int irq; - u8 linkstat; - u8 asleep; - bool irq_enabled; -}; - -/* internal define on top of container_of */ -#define xceiv_to_twl(x) container_of((x), struct twl4030_usb, otg); - -/*-------------------------------------------------------------------------*/ - -static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl, - u8 module, u8 data, u8 address) -{ - u8 check; - - if ((twl_i2c_write_u8(module, data, address) >= 0) && - (twl_i2c_read_u8(module, &check, address) >= 0) && - (check == data)) - return 0; - dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", - 1, module, address, check, data); - - /* Failed once: Try again */ - if ((twl_i2c_write_u8(module, data, address) >= 0) && - (twl_i2c_read_u8(module, &check, address) >= 0) && - (check == data)) - return 0; - dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", - 2, module, address, check, data); - - /* Failed again: Return error */ - return -EBUSY; -} - -#define twl4030_usb_write_verify(twl, address, data) \ - twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_USB, (data), (address)) - -static inline int twl4030_usb_write(struct twl4030_usb *twl, - u8 address, u8 data) -{ - int ret = 0; - - ret = twl_i2c_write_u8(TWL4030_MODULE_USB, data, address); - if (ret < 0) - dev_dbg(twl->dev, - "TWL4030:USB:Write[0x%x] Error %d\n", address, ret); - return ret; -} - -static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address) -{ - u8 data; - int ret = 0; - - ret = twl_i2c_read_u8(module, &data, address); - if (ret >= 0) - ret = data; - else - dev_dbg(twl->dev, - "TWL4030:readb[0x%x,0x%x] Error %d\n", - module, address, ret); - - return ret; -} - -static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address) -{ - return twl4030_readb(twl, TWL4030_MODULE_USB, address); -} - -/*-------------------------------------------------------------------------*/ - -static inline int -twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits) -{ - return twl4030_usb_write(twl, ULPI_SET(reg), bits); -} - -static inline int -twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits) -{ - return twl4030_usb_write(twl, ULPI_CLR(reg), bits); -} - -/*-------------------------------------------------------------------------*/ - -static enum usb_xceiv_events twl4030_usb_linkstat(struct twl4030_usb *twl) -{ - int status; - int linkstat = USB_EVENT_NONE; - - /* - * For ID/VBUS sensing, see manual section 15.4.8 ... - * except when using only battery backup power, two - * comparators produce VBUS_PRES and ID_PRES signals, - * which don't match docs elsewhere. But ... BIT(7) - * and BIT(2) of STS_HW_CONDITIONS, respectively, do - * seem to match up. If either is true the USB_PRES - * signal is active, the OTG module is activated, and - * its interrupt may be raised (may wake the system). - */ - status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER, - STS_HW_CONDITIONS); - if (status < 0) - dev_err(twl->dev, "USB link status err %d\n", status); - else if (status & (BIT(7) | BIT(2))) { - if (status & BIT(2)) - linkstat = USB_EVENT_ID; - else - linkstat = USB_EVENT_VBUS; - } else - linkstat = USB_EVENT_NONE; - - dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n", - status, status, linkstat); - - twl->otg.last_event = linkstat; - - /* REVISIT this assumes host and peripheral controllers - * are registered, and that both are active... - */ - - spin_lock_irq(&twl->lock); - twl->linkstat = linkstat; - if (linkstat == USB_EVENT_ID) { - twl->otg.default_a = true; - twl->otg.state = OTG_STATE_A_IDLE; - } else { - twl->otg.default_a = false; - twl->otg.state = OTG_STATE_B_IDLE; - } - spin_unlock_irq(&twl->lock); - - return linkstat; -} - -static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode) -{ - twl->usb_mode = mode; - - switch (mode) { - case T2_USB_MODE_ULPI: - twl4030_usb_clear_bits(twl, ULPI_IFC_CTRL, - ULPI_IFC_CTRL_CARKITMODE); - twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); - twl4030_usb_clear_bits(twl, ULPI_FUNC_CTRL, - ULPI_FUNC_CTRL_XCVRSEL_MASK | - ULPI_FUNC_CTRL_OPMODE_MASK); - break; - case -1: - /* FIXME: power on defaults */ - break; - default: - dev_err(twl->dev, "unsupported T2 transceiver mode %d\n", - mode); - break; - }; -} - -static void twl4030_i2c_access(struct twl4030_usb *twl, int on) -{ - unsigned long timeout; - int val = twl4030_usb_read(twl, PHY_CLK_CTRL); - - if (val >= 0) { - if (on) { - /* enable DPLL to access PHY registers over I2C */ - val |= REQ_PHY_DPLL_CLK; - WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, - (u8)val) < 0); - - timeout = jiffies + HZ; - while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & - PHY_DPLL_CLK) - && time_before(jiffies, timeout)) - udelay(10); - if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & - PHY_DPLL_CLK)) - dev_err(twl->dev, "Timeout setting T2 HSUSB " - "PHY DPLL clock\n"); - } else { - /* let ULPI control the DPLL clock */ - val &= ~REQ_PHY_DPLL_CLK; - WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, - (u8)val) < 0); - } - } -} - -static void __twl4030_phy_power(struct twl4030_usb *twl, int on) -{ - u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); - - if (on) - pwr &= ~PHY_PWR_PHYPWD; - else - pwr |= PHY_PWR_PHYPWD; - - WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); -} - -static void twl4030_phy_power(struct twl4030_usb *twl, int on) -{ - if (on) { - regulator_enable(twl->usb3v1); - regulator_enable(twl->usb1v8); - /* - * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP - * in twl4030) resets the VUSB_DEDICATED2 register. This reset - * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to - * SLEEP. We work around this by clearing the bit after usv3v1 - * is re-activated. This ensures that VUSB3V1 is really active. - */ - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, - VUSB_DEDICATED2); - regulator_enable(twl->usb1v5); - __twl4030_phy_power(twl, 1); - twl4030_usb_write(twl, PHY_CLK_CTRL, - twl4030_usb_read(twl, PHY_CLK_CTRL) | - (PHY_CLK_CTRL_CLOCKGATING_EN | - PHY_CLK_CTRL_CLK32K_EN)); - } else { - __twl4030_phy_power(twl, 0); - regulator_disable(twl->usb1v5); - regulator_disable(twl->usb1v8); - regulator_disable(twl->usb3v1); - } -} - -static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off) -{ - if (twl->asleep) - return; - - twl4030_phy_power(twl, 0); - twl->asleep = 1; - dev_dbg(twl->dev, "%s\n", __func__); -} - -static void __twl4030_phy_resume(struct twl4030_usb *twl) -{ - twl4030_phy_power(twl, 1); - twl4030_i2c_access(twl, 1); - twl4030_usb_set_mode(twl, twl->usb_mode); - if (twl->usb_mode == T2_USB_MODE_ULPI) - twl4030_i2c_access(twl, 0); -} - -static void twl4030_phy_resume(struct twl4030_usb *twl) -{ - if (!twl->asleep) - return; - __twl4030_phy_resume(twl); - twl->asleep = 0; - dev_dbg(twl->dev, "%s\n", __func__); -} - -static int twl4030_usb_ldo_init(struct twl4030_usb *twl) -{ - /* Enable writing to power configuration registers */ - twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, - TWL4030_PM_MASTER_KEY_CFG1, - TWL4030_PM_MASTER_PROTECT_KEY); - - twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, - TWL4030_PM_MASTER_KEY_CFG2, - TWL4030_PM_MASTER_PROTECT_KEY); - - /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/ - /*twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/ - - /* input to VUSB3V1 LDO is from VBAT, not VBUS */ - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); - - /* Initialize 3.1V regulator */ - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); - - twl->usb3v1 = regulator_get(twl->dev, "usb3v1"); - if (IS_ERR(twl->usb3v1)) - return -ENODEV; - - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); - - /* Initialize 1.5V regulator */ - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); - - twl->usb1v5 = regulator_get(twl->dev, "usb1v5"); - if (IS_ERR(twl->usb1v5)) - goto fail1; - - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); - - /* Initialize 1.8V regulator */ - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); - - twl->usb1v8 = regulator_get(twl->dev, "usb1v8"); - if (IS_ERR(twl->usb1v8)) - goto fail2; - - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); - - /* disable access to power configuration registers */ - twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, - TWL4030_PM_MASTER_PROTECT_KEY); - - return 0; - -fail2: - regulator_put(twl->usb1v5); - twl->usb1v5 = NULL; -fail1: - regulator_put(twl->usb3v1); - twl->usb3v1 = NULL; - return -ENODEV; -} - -static ssize_t twl4030_usb_vbus_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct twl4030_usb *twl = dev_get_drvdata(dev); - unsigned long flags; - int ret = -EINVAL; - - spin_lock_irqsave(&twl->lock, flags); - ret = sprintf(buf, "%s\n", - (twl->linkstat == USB_EVENT_VBUS) ? "on" : "off"); - spin_unlock_irqrestore(&twl->lock, flags); - - return ret; -} -static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL); - -static irqreturn_t twl4030_usb_irq(int irq, void *_twl) -{ - struct twl4030_usb *twl = _twl; - int status; - - status = twl4030_usb_linkstat(twl); - if (status >= 0) { - /* FIXME add a set_power() method so that B-devices can - * configure the charger appropriately. It's not always - * correct to consume VBUS power, and how much current to - * consume is a function of the USB configuration chosen - * by the host. - * - * REVISIT usb_gadget_vbus_connect(...) as needed, ditto - * its disconnect() sibling, when changing to/from the - * USB_LINK_VBUS state. musb_hdrc won't care until it - * starts to handle softconnect right. - */ - if (status == USB_EVENT_NONE) - twl4030_phy_suspend(twl, 0); - else - twl4030_phy_resume(twl); - - atomic_notifier_call_chain(&twl->otg.notifier, status, - twl->otg.gadget); - } - sysfs_notify(&twl->dev->kobj, NULL, "vbus"); - - return IRQ_HANDLED; -} - -static void twl4030_usb_phy_init(struct twl4030_usb *twl) -{ - int status; - - status = twl4030_usb_linkstat(twl); - if (status >= 0) { - if (status == USB_EVENT_NONE) { - __twl4030_phy_power(twl, 0); - twl->asleep = 1; - } else { - __twl4030_phy_resume(twl); - twl->asleep = 0; - } - - atomic_notifier_call_chain(&twl->otg.notifier, status, - twl->otg.gadget); - } - sysfs_notify(&twl->dev->kobj, NULL, "vbus"); -} - -static int twl4030_set_suspend(struct otg_transceiver *x, int suspend) -{ - struct twl4030_usb *twl = xceiv_to_twl(x); - - if (suspend) - twl4030_phy_suspend(twl, 1); - else - twl4030_phy_resume(twl); - - return 0; -} - -static int twl4030_set_peripheral(struct otg_transceiver *x, - struct usb_gadget *gadget) -{ - struct twl4030_usb *twl; - - if (!x) - return -ENODEV; - - twl = xceiv_to_twl(x); - twl->otg.gadget = gadget; - if (!gadget) - twl->otg.state = OTG_STATE_UNDEFINED; - - return 0; -} - -static int twl4030_set_host(struct otg_transceiver *x, struct usb_bus *host) -{ - struct twl4030_usb *twl; - - if (!x) - return -ENODEV; - - twl = xceiv_to_twl(x); - twl->otg.host = host; - if (!host) - twl->otg.state = OTG_STATE_UNDEFINED; - - return 0; -} - -static int __devinit twl4030_usb_probe(struct platform_device *pdev) -{ - struct twl4030_usb_data *pdata = pdev->dev.platform_data; - struct twl4030_usb *twl; - int status, err; - - if (!pdata) { - dev_dbg(&pdev->dev, "platform_data not available\n"); - return -EINVAL; - } - - twl = kzalloc(sizeof *twl, GFP_KERNEL); - if (!twl) - return -ENOMEM; - - twl->dev = &pdev->dev; - twl->irq = platform_get_irq(pdev, 0); - twl->otg.dev = twl->dev; - twl->otg.label = "twl4030"; - twl->otg.set_host = twl4030_set_host; - twl->otg.set_peripheral = twl4030_set_peripheral; - twl->otg.set_suspend = twl4030_set_suspend; - twl->usb_mode = pdata->usb_mode; - twl->asleep = 1; - - /* init spinlock for workqueue */ - spin_lock_init(&twl->lock); - - err = twl4030_usb_ldo_init(twl); - if (err) { - dev_err(&pdev->dev, "ldo init failed\n"); - kfree(twl); - return err; - } - otg_set_transceiver(&twl->otg); - - platform_set_drvdata(pdev, twl); - if (device_create_file(&pdev->dev, &dev_attr_vbus)) - dev_warn(&pdev->dev, "could not create sysfs file\n"); - - ATOMIC_INIT_NOTIFIER_HEAD(&twl->otg.notifier); - - /* Our job is to use irqs and status from the power module - * to keep the transceiver disabled when nothing's connected. - * - * FIXME we actually shouldn't start enabling it until the - * USB controller drivers have said they're ready, by calling - * set_host() and/or set_peripheral() ... OTG_capable boards - * need both handles, otherwise just one suffices. - */ - twl->irq_enabled = true; - status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "twl4030_usb", twl); - if (status < 0) { - dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n", - twl->irq, status); - kfree(twl); - return status; - } - - /* Power down phy or make it work according to - * current link state. - */ - twl4030_usb_phy_init(twl); - - dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); - return 0; -} - -static int __exit twl4030_usb_remove(struct platform_device *pdev) -{ - struct twl4030_usb *twl = platform_get_drvdata(pdev); - int val; - - free_irq(twl->irq, twl); - device_remove_file(twl->dev, &dev_attr_vbus); - - /* set transceiver mode to power on defaults */ - twl4030_usb_set_mode(twl, -1); - - /* autogate 60MHz ULPI clock, - * clear dpll clock request for i2c access, - * disable 32KHz - */ - val = twl4030_usb_read(twl, PHY_CLK_CTRL); - if (val >= 0) { - val |= PHY_CLK_CTRL_CLOCKGATING_EN; - val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK); - twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val); - } - - /* disable complete OTG block */ - twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); - - if (!twl->asleep) - twl4030_phy_power(twl, 0); - regulator_put(twl->usb1v5); - regulator_put(twl->usb1v8); - regulator_put(twl->usb3v1); - - kfree(twl); - - return 0; -} - -static struct platform_driver twl4030_usb_driver = { - .probe = twl4030_usb_probe, - .remove = __exit_p(twl4030_usb_remove), - .driver = { - .name = "twl4030_usb", - .owner = THIS_MODULE, - }, -}; - -static int __init twl4030_usb_init(void) -{ - return platform_driver_register(&twl4030_usb_driver); -} -subsys_initcall(twl4030_usb_init); - -static void __exit twl4030_usb_exit(void) -{ - platform_driver_unregister(&twl4030_usb_driver); -} -module_exit(twl4030_usb_exit); - -MODULE_ALIAS("platform:twl4030_usb"); -MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation"); -MODULE_DESCRIPTION("TWL4030 USB transceiver driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c deleted file mode 100644 index 8a91b4b832a..00000000000 --- a/drivers/usb/otg/twl6030-usb.c +++ /dev/null @@ -1,503 +0,0 @@ -/* - * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver. - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Author: Hema HK <hemahk@ti.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/usb/otg.h> -#include <linux/i2c/twl.h> -#include <linux/regulator/consumer.h> -#include <linux/err.h> -#include <linux/notifier.h> -#include <linux/slab.h> - -/* usb register definitions */ -#define USB_VENDOR_ID_LSB 0x00 -#define USB_VENDOR_ID_MSB 0x01 -#define USB_PRODUCT_ID_LSB 0x02 -#define USB_PRODUCT_ID_MSB 0x03 -#define USB_VBUS_CTRL_SET 0x04 -#define USB_VBUS_CTRL_CLR 0x05 -#define USB_ID_CTRL_SET 0x06 -#define USB_ID_CTRL_CLR 0x07 -#define USB_VBUS_INT_SRC 0x08 -#define USB_VBUS_INT_LATCH_SET 0x09 -#define USB_VBUS_INT_LATCH_CLR 0x0A -#define USB_VBUS_INT_EN_LO_SET 0x0B -#define USB_VBUS_INT_EN_LO_CLR 0x0C -#define USB_VBUS_INT_EN_HI_SET 0x0D -#define USB_VBUS_INT_EN_HI_CLR 0x0E -#define USB_ID_INT_SRC 0x0F -#define USB_ID_INT_LATCH_SET 0x10 -#define USB_ID_INT_LATCH_CLR 0x11 - -#define USB_ID_INT_EN_LO_SET 0x12 -#define USB_ID_INT_EN_LO_CLR 0x13 -#define USB_ID_INT_EN_HI_SET 0x14 -#define USB_ID_INT_EN_HI_CLR 0x15 -#define USB_OTG_ADP_CTRL 0x16 -#define USB_OTG_ADP_HIGH 0x17 -#define USB_OTG_ADP_LOW 0x18 -#define USB_OTG_ADP_RISE 0x19 -#define USB_OTG_REVISION 0x1A - -/* to be moved to LDO */ -#define TWL6030_MISC2 0xE5 -#define TWL6030_CFG_LDO_PD2 0xF5 -#define TWL6030_BACKUP_REG 0xFA - -#define STS_HW_CONDITIONS 0x21 - -/* In module TWL6030_MODULE_PM_MASTER */ -#define STS_HW_CONDITIONS 0x21 -#define STS_USB_ID BIT(2) - -/* In module TWL6030_MODULE_PM_RECEIVER */ -#define VUSB_CFG_TRANS 0x71 -#define VUSB_CFG_STATE 0x72 -#define VUSB_CFG_VOLTAGE 0x73 - -/* in module TWL6030_MODULE_MAIN_CHARGE */ - -#define CHARGERUSB_CTRL1 0x8 - -#define CONTROLLER_STAT1 0x03 -#define VBUS_DET BIT(2) - -struct twl6030_usb { - struct otg_transceiver otg; - struct device *dev; - - /* for vbus reporting with irqs disabled */ - spinlock_t lock; - - struct regulator *usb3v3; - - int irq1; - int irq2; - u8 linkstat; - u8 asleep; - bool irq_enabled; -}; - -#define xceiv_to_twl(x) container_of((x), struct twl6030_usb, otg); - -/*-------------------------------------------------------------------------*/ - -static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module, - u8 data, u8 address) -{ - int ret = 0; - - ret = twl_i2c_write_u8(module, data, address); - if (ret < 0) - dev_err(twl->dev, - "Write[0x%x] Error %d\n", address, ret); - return ret; -} - -static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address) -{ - u8 data, ret = 0; - - ret = twl_i2c_read_u8(module, &data, address); - if (ret >= 0) - ret = data; - else - dev_err(twl->dev, - "readb[0x%x,0x%x] Error %d\n", - module, address, ret); - return ret; -} - -/*-------------------------------------------------------------------------*/ -static int twl6030_set_phy_clk(struct otg_transceiver *x, int on) -{ - struct twl6030_usb *twl; - struct device *dev; - struct twl4030_usb_data *pdata; - - twl = xceiv_to_twl(x); - dev = twl->dev; - pdata = dev->platform_data; - - pdata->phy_set_clock(twl->dev, on); - - return 0; -} - -static int twl6030_phy_init(struct otg_transceiver *x) -{ - struct twl6030_usb *twl; - struct device *dev; - struct twl4030_usb_data *pdata; - - twl = xceiv_to_twl(x); - dev = twl->dev; - pdata = dev->platform_data; - - if (twl->linkstat == USB_EVENT_ID) - pdata->phy_power(twl->dev, 1, 1); - else - pdata->phy_power(twl->dev, 0, 1); - - return 0; -} - -static void twl6030_phy_shutdown(struct otg_transceiver *x) -{ - struct twl6030_usb *twl; - struct device *dev; - struct twl4030_usb_data *pdata; - - twl = xceiv_to_twl(x); - dev = twl->dev; - pdata = dev->platform_data; - pdata->phy_power(twl->dev, 0, 0); -} - -static int twl6030_phy_suspend(struct otg_transceiver *x, int suspend) -{ - struct twl6030_usb *twl = xceiv_to_twl(x); - struct device *dev = twl->dev; - struct twl4030_usb_data *pdata = dev->platform_data; - - pdata->phy_suspend(dev, suspend); - - return 0; -} - -static int twl6030_usb_ldo_init(struct twl6030_usb *twl) -{ - - /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */ - twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG); - - /* Program CFG_LDO_PD2 register and set VUSB bit */ - twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2); - - /* Program MISC2 register and set bit VUSB_IN_VBAT */ - twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2); - - twl->usb3v3 = regulator_get(twl->dev, "vusb"); - if (IS_ERR(twl->usb3v3)) - return -ENODEV; - - /* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */ - twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET); - - /* - * Program the USB_ID_CTRL_SET register to enable GND drive - * and the ID comparators - */ - twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET); - - return 0; -} - -static ssize_t twl6030_usb_vbus_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct twl6030_usb *twl = dev_get_drvdata(dev); - unsigned long flags; - int ret = -EINVAL; - - spin_lock_irqsave(&twl->lock, flags); - - switch (twl->linkstat) { - case USB_EVENT_VBUS: - ret = snprintf(buf, PAGE_SIZE, "vbus\n"); - break; - case USB_EVENT_ID: - ret = snprintf(buf, PAGE_SIZE, "id\n"); - break; - case USB_EVENT_NONE: - ret = snprintf(buf, PAGE_SIZE, "none\n"); - break; - default: - ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n"); - } - spin_unlock_irqrestore(&twl->lock, flags); - - return ret; -} -static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL); - -static irqreturn_t twl6030_usb_irq(int irq, void *_twl) -{ - struct twl6030_usb *twl = _twl; - int status; - u8 vbus_state, hw_state; - - hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); - - vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE, - CONTROLLER_STAT1); - if (!(hw_state & STS_USB_ID)) { - if (vbus_state & VBUS_DET) { - regulator_enable(twl->usb3v3); - twl->asleep = 1; - status = USB_EVENT_VBUS; - twl->otg.default_a = false; - twl->otg.state = OTG_STATE_B_IDLE; - twl->linkstat = status; - twl->otg.last_event = status; - atomic_notifier_call_chain(&twl->otg.notifier, - status, twl->otg.gadget); - } else { - status = USB_EVENT_NONE; - twl->linkstat = status; - twl->otg.last_event = status; - atomic_notifier_call_chain(&twl->otg.notifier, - status, twl->otg.gadget); - if (twl->asleep) { - regulator_disable(twl->usb3v3); - twl->asleep = 0; - } - } - } - sysfs_notify(&twl->dev->kobj, NULL, "vbus"); - - return IRQ_HANDLED; -} - -static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) -{ - struct twl6030_usb *twl = _twl; - int status = USB_EVENT_NONE; - u8 hw_state; - - hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); - - if (hw_state & STS_USB_ID) { - - regulator_enable(twl->usb3v3); - twl->asleep = 1; - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1); - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, - 0x10); - status = USB_EVENT_ID; - twl->otg.default_a = true; - twl->otg.state = OTG_STATE_A_IDLE; - twl->linkstat = status; - twl->otg.last_event = status; - atomic_notifier_call_chain(&twl->otg.notifier, status, - twl->otg.gadget); - } else { - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, - 0x10); - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, - 0x1); - } - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status); - - return IRQ_HANDLED; -} - -static int twl6030_set_peripheral(struct otg_transceiver *x, - struct usb_gadget *gadget) -{ - struct twl6030_usb *twl; - - if (!x) - return -ENODEV; - - twl = xceiv_to_twl(x); - twl->otg.gadget = gadget; - if (!gadget) - twl->otg.state = OTG_STATE_UNDEFINED; - - return 0; -} - -static int twl6030_enable_irq(struct otg_transceiver *x) -{ - struct twl6030_usb *twl = xceiv_to_twl(x); - - twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1); - twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C); - twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C); - - twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, - REG_INT_MSK_LINE_C); - twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, - REG_INT_MSK_STS_C); - twl6030_usb_irq(twl->irq2, twl); - twl6030_usbotg_irq(twl->irq1, twl); - - return 0; -} - -static int twl6030_set_vbus(struct otg_transceiver *x, bool enabled) -{ - struct twl6030_usb *twl = xceiv_to_twl(x); - - /* - * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1 - * register. This enables boost mode. - */ - if (enabled) - twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40, - CHARGERUSB_CTRL1); - else - twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00, - CHARGERUSB_CTRL1); - return 0; -} - -static int twl6030_set_host(struct otg_transceiver *x, struct usb_bus *host) -{ - struct twl6030_usb *twl; - - if (!x) - return -ENODEV; - - twl = xceiv_to_twl(x); - twl->otg.host = host; - if (!host) - twl->otg.state = OTG_STATE_UNDEFINED; - return 0; -} - -static int __devinit twl6030_usb_probe(struct platform_device *pdev) -{ - struct twl6030_usb *twl; - int status, err; - struct twl4030_usb_data *pdata; - struct device *dev = &pdev->dev; - pdata = dev->platform_data; - - twl = kzalloc(sizeof *twl, GFP_KERNEL); - if (!twl) - return -ENOMEM; - - twl->dev = &pdev->dev; - twl->irq1 = platform_get_irq(pdev, 0); - twl->irq2 = platform_get_irq(pdev, 1); - twl->otg.dev = twl->dev; - twl->otg.label = "twl6030"; - twl->otg.set_host = twl6030_set_host; - twl->otg.set_peripheral = twl6030_set_peripheral; - twl->otg.set_vbus = twl6030_set_vbus; - twl->otg.init = twl6030_phy_init; - twl->otg.shutdown = twl6030_phy_shutdown; - twl->otg.set_suspend = twl6030_phy_suspend; - - /* init spinlock for workqueue */ - spin_lock_init(&twl->lock); - - err = twl6030_usb_ldo_init(twl); - if (err) { - dev_err(&pdev->dev, "ldo init failed\n"); - kfree(twl); - return err; - } - otg_set_transceiver(&twl->otg); - - platform_set_drvdata(pdev, twl); - if (device_create_file(&pdev->dev, &dev_attr_vbus)) - dev_warn(&pdev->dev, "could not create sysfs file\n"); - - ATOMIC_INIT_NOTIFIER_HEAD(&twl->otg.notifier); - - twl->irq_enabled = true; - status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "twl6030_usb", twl); - if (status < 0) { - dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", - twl->irq1, status); - device_remove_file(twl->dev, &dev_attr_vbus); - kfree(twl); - return status; - } - - status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "twl6030_usb", twl); - if (status < 0) { - dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", - twl->irq2, status); - free_irq(twl->irq1, twl); - device_remove_file(twl->dev, &dev_attr_vbus); - kfree(twl); - return status; - } - - twl->asleep = 0; - pdata->phy_init(dev); - twl6030_phy_suspend(&twl->otg, 0); - twl6030_enable_irq(&twl->otg); - dev_info(&pdev->dev, "Initialized TWL6030 USB module\n"); - - return 0; -} - -static int __exit twl6030_usb_remove(struct platform_device *pdev) -{ - struct twl6030_usb *twl = platform_get_drvdata(pdev); - - struct twl4030_usb_data *pdata; - struct device *dev = &pdev->dev; - pdata = dev->platform_data; - - twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, - REG_INT_MSK_LINE_C); - twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, - REG_INT_MSK_STS_C); - free_irq(twl->irq1, twl); - free_irq(twl->irq2, twl); - regulator_put(twl->usb3v3); - pdata->phy_exit(twl->dev); - device_remove_file(twl->dev, &dev_attr_vbus); - kfree(twl); - - return 0; -} - -static struct platform_driver twl6030_usb_driver = { - .probe = twl6030_usb_probe, - .remove = __exit_p(twl6030_usb_remove), - .driver = { - .name = "twl6030_usb", - .owner = THIS_MODULE, - }, -}; - -static int __init twl6030_usb_init(void) -{ - return platform_driver_register(&twl6030_usb_driver); -} -subsys_initcall(twl6030_usb_init); - -static void __exit twl6030_usb_exit(void) -{ - platform_driver_unregister(&twl6030_usb_driver); -} -module_exit(twl6030_usb_exit); - -MODULE_ALIAS("platform:twl6030_usb"); -MODULE_AUTHOR("Hema HK <hemahk@ti.com>"); -MODULE_DESCRIPTION("TWL6030 USB transceiver driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c deleted file mode 100644 index 770d799d5af..00000000000 --- a/drivers/usb/otg/ulpi.c +++ /dev/null @@ -1,270 +0,0 @@ -/* - * Generic ULPI USB transceiver support - * - * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> - * - * Based on sources from - * - * Sascha Hauer <s.hauer@pengutronix.de> - * Freescale Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/usb.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - - -struct ulpi_info { - unsigned int id; - char *name; -}; - -#define ULPI_ID(vendor, product) (((vendor) << 16) | (product)) -#define ULPI_INFO(_id, _name) \ - { \ - .id = (_id), \ - .name = (_name), \ - } - -/* ULPI hardcoded IDs, used for probing */ -static struct ulpi_info ulpi_ids[] = { - ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"), - ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"), -}; - -static int ulpi_set_otg_flags(struct otg_transceiver *otg) -{ - unsigned int flags = ULPI_OTG_CTRL_DP_PULLDOWN | - ULPI_OTG_CTRL_DM_PULLDOWN; - - if (otg->flags & ULPI_OTG_ID_PULLUP) - flags |= ULPI_OTG_CTRL_ID_PULLUP; - - /* - * ULPI Specification rev.1.1 default - * for Dp/DmPulldown is enabled. - */ - if (otg->flags & ULPI_OTG_DP_PULLDOWN_DIS) - flags &= ~ULPI_OTG_CTRL_DP_PULLDOWN; - - if (otg->flags & ULPI_OTG_DM_PULLDOWN_DIS) - flags &= ~ULPI_OTG_CTRL_DM_PULLDOWN; - - if (otg->flags & ULPI_OTG_EXTVBUSIND) - flags |= ULPI_OTG_CTRL_EXTVBUSIND; - - return otg_io_write(otg, flags, ULPI_OTG_CTRL); -} - -static int ulpi_set_fc_flags(struct otg_transceiver *otg) -{ - unsigned int flags = 0; - - /* - * ULPI Specification rev.1.1 default - * for XcvrSelect is Full Speed. - */ - if (otg->flags & ULPI_FC_HS) - flags |= ULPI_FUNC_CTRL_HIGH_SPEED; - else if (otg->flags & ULPI_FC_LS) - flags |= ULPI_FUNC_CTRL_LOW_SPEED; - else if (otg->flags & ULPI_FC_FS4LS) - flags |= ULPI_FUNC_CTRL_FS4LS; - else - flags |= ULPI_FUNC_CTRL_FULL_SPEED; - - if (otg->flags & ULPI_FC_TERMSEL) - flags |= ULPI_FUNC_CTRL_TERMSELECT; - - /* - * ULPI Specification rev.1.1 default - * for OpMode is Normal Operation. - */ - if (otg->flags & ULPI_FC_OP_NODRV) - flags |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; - else if (otg->flags & ULPI_FC_OP_DIS_NRZI) - flags |= ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI; - else if (otg->flags & ULPI_FC_OP_NSYNC_NEOP) - flags |= ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP; - else - flags |= ULPI_FUNC_CTRL_OPMODE_NORMAL; - - /* - * ULPI Specification rev.1.1 default - * for SuspendM is Powered. - */ - flags |= ULPI_FUNC_CTRL_SUSPENDM; - - return otg_io_write(otg, flags, ULPI_FUNC_CTRL); -} - -static int ulpi_set_ic_flags(struct otg_transceiver *otg) -{ - unsigned int flags = 0; - - if (otg->flags & ULPI_IC_AUTORESUME) - flags |= ULPI_IFC_CTRL_AUTORESUME; - - if (otg->flags & ULPI_IC_EXTVBUS_INDINV) - flags |= ULPI_IFC_CTRL_EXTERNAL_VBUS; - - if (otg->flags & ULPI_IC_IND_PASSTHRU) - flags |= ULPI_IFC_CTRL_PASSTHRU; - - if (otg->flags & ULPI_IC_PROTECT_DIS) - flags |= ULPI_IFC_CTRL_PROTECT_IFC_DISABLE; - - return otg_io_write(otg, flags, ULPI_IFC_CTRL); -} - -static int ulpi_set_flags(struct otg_transceiver *otg) -{ - int ret; - - ret = ulpi_set_otg_flags(otg); - if (ret) - return ret; - - ret = ulpi_set_ic_flags(otg); - if (ret) - return ret; - - return ulpi_set_fc_flags(otg); -} - -static int ulpi_check_integrity(struct otg_transceiver *otg) -{ - int ret, i; - unsigned int val = 0x55; - - for (i = 0; i < 2; i++) { - ret = otg_io_write(otg, val, ULPI_SCRATCH); - if (ret < 0) - return ret; - - ret = otg_io_read(otg, ULPI_SCRATCH); - if (ret < 0) - return ret; - - if (ret != val) { - pr_err("ULPI integrity check: failed!"); - return -ENODEV; - } - val = val << 1; - } - - pr_info("ULPI integrity check: passed.\n"); - - return 0; -} - -static int ulpi_init(struct otg_transceiver *otg) -{ - int i, vid, pid, ret; - u32 ulpi_id = 0; - - for (i = 0; i < 4; i++) { - ret = otg_io_read(otg, ULPI_PRODUCT_ID_HIGH - i); - if (ret < 0) - return ret; - ulpi_id = (ulpi_id << 8) | ret; - } - vid = ulpi_id & 0xffff; - pid = ulpi_id >> 16; - - pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid); - - for (i = 0; i < ARRAY_SIZE(ulpi_ids); i++) { - if (ulpi_ids[i].id == ULPI_ID(vid, pid)) { - pr_info("Found %s ULPI transceiver.\n", - ulpi_ids[i].name); - break; - } - } - - ret = ulpi_check_integrity(otg); - if (ret) - return ret; - - return ulpi_set_flags(otg); -} - -static int ulpi_set_host(struct otg_transceiver *otg, struct usb_bus *host) -{ - unsigned int flags = otg_io_read(otg, ULPI_IFC_CTRL); - - if (!host) { - otg->host = NULL; - return 0; - } - - otg->host = host; - - flags &= ~(ULPI_IFC_CTRL_6_PIN_SERIAL_MODE | - ULPI_IFC_CTRL_3_PIN_SERIAL_MODE | - ULPI_IFC_CTRL_CARKITMODE); - - if (otg->flags & ULPI_IC_6PIN_SERIAL) - flags |= ULPI_IFC_CTRL_6_PIN_SERIAL_MODE; - else if (otg->flags & ULPI_IC_3PIN_SERIAL) - flags |= ULPI_IFC_CTRL_3_PIN_SERIAL_MODE; - else if (otg->flags & ULPI_IC_CARKIT) - flags |= ULPI_IFC_CTRL_CARKITMODE; - - return otg_io_write(otg, flags, ULPI_IFC_CTRL); -} - -static int ulpi_set_vbus(struct otg_transceiver *otg, bool on) -{ - unsigned int flags = otg_io_read(otg, ULPI_OTG_CTRL); - - flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT); - - if (on) { - if (otg->flags & ULPI_OTG_DRVVBUS) - flags |= ULPI_OTG_CTRL_DRVVBUS; - - if (otg->flags & ULPI_OTG_DRVVBUS_EXT) - flags |= ULPI_OTG_CTRL_DRVVBUS_EXT; - } - - return otg_io_write(otg, flags, ULPI_OTG_CTRL); -} - -struct otg_transceiver * -otg_ulpi_create(struct otg_io_access_ops *ops, - unsigned int flags) -{ - struct otg_transceiver *otg; - - otg = kzalloc(sizeof(*otg), GFP_KERNEL); - if (!otg) - return NULL; - - otg->label = "ULPI"; - otg->flags = flags; - otg->io_ops = ops; - otg->init = ulpi_init; - otg->set_host = ulpi_set_host; - otg->set_vbus = ulpi_set_vbus; - - return otg; -} -EXPORT_SYMBOL_GPL(otg_ulpi_create); - diff --git a/drivers/usb/otg/ulpi_viewport.c b/drivers/usb/otg/ulpi_viewport.c deleted file mode 100644 index e9a37f90994..00000000000 --- a/drivers/usb/otg/ulpi_viewport.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Copyright (C) 2011 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/usb.h> -#include <linux/io.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#define ULPI_VIEW_WAKEUP (1 << 31) -#define ULPI_VIEW_RUN (1 << 30) -#define ULPI_VIEW_WRITE (1 << 29) -#define ULPI_VIEW_READ (0 << 29) -#define ULPI_VIEW_ADDR(x) (((x) & 0xff) << 16) -#define ULPI_VIEW_DATA_READ(x) (((x) >> 8) & 0xff) -#define ULPI_VIEW_DATA_WRITE(x) ((x) & 0xff) - -static int ulpi_viewport_wait(void __iomem *view, u32 mask) -{ - unsigned long usec = 2000; - - while (usec--) { - if (!(readl(view) & mask)) - return 0; - - udelay(1); - }; - - return -ETIMEDOUT; -} - -static int ulpi_viewport_read(struct otg_transceiver *otg, u32 reg) -{ - int ret; - void __iomem *view = otg->io_priv; - - writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view); - ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP); - if (ret) - return ret; - - writel(ULPI_VIEW_RUN | ULPI_VIEW_READ | ULPI_VIEW_ADDR(reg), view); - ret = ulpi_viewport_wait(view, ULPI_VIEW_RUN); - if (ret) - return ret; - - return ULPI_VIEW_DATA_READ(readl(view)); -} - -static int ulpi_viewport_write(struct otg_transceiver *otg, u32 val, u32 reg) -{ - int ret; - void __iomem *view = otg->io_priv; - - writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view); - ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP); - if (ret) - return ret; - - writel(ULPI_VIEW_RUN | ULPI_VIEW_WRITE | ULPI_VIEW_DATA_WRITE(val) | - ULPI_VIEW_ADDR(reg), view); - - return ulpi_viewport_wait(view, ULPI_VIEW_RUN); -} - -struct otg_io_access_ops ulpi_viewport_access_ops = { - .read = ulpi_viewport_read, - .write = ulpi_viewport_write, -}; |