1 files changed, 113 insertions, 81 deletions

diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index bf677acc83d..e2d2d8c9891 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -35,9 +35,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/errno.h>
-#include <linux/init.h>
 #include <linux/time.h>
 #include <linux/timer.h>
 
@@ -45,9 +43,40 @@
 
 #include "musb_core.h"
 
+void musb_host_finish_resume(struct work_struct *work)
+{
+	struct musb *musb;
+	unsigned long flags;
+	u8 power;
+
+	musb = container_of(work, struct musb, finish_resume_work.work);
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	power = musb_readb(musb->mregs, MUSB_POWER);
+	power &= ~MUSB_POWER_RESUME;
+	dev_dbg(musb->controller, "root port resume stopped, power %02x\n",
+		power);
+	musb_writeb(musb->mregs, MUSB_POWER, power);
+
+	/*
+	 * ISSUE:  DaVinci (RTL 1.300) disconnects after
+	 * resume of high speed peripherals (but not full
+	 * speed ones).
+	 */
+	musb->is_active = 1;
+	musb->port1_status &= ~(USB_PORT_STAT_SUSPEND | MUSB_PORT_STAT_RESUME);
+	musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+	usb_hcd_poll_rh_status(musb->hcd);
+	/* NOTE: it might really be A_WAIT_BCON ... */
+	musb->xceiv->state = OTG_STATE_A_HOST;
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
 
-static void musb_port_suspend(struct musb *musb, bool do_suspend)
+void musb_port_suspend(struct musb *musb, bool do_suspend)
 {
+	struct usb_otg	*otg = musb->xceiv->otg;
 	u8		power;
 	void __iomem	*mbase = musb->mregs;
 
@@ -75,53 +104,52 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
 				break;
 		}
 
-		DBG(3, "Root port suspended, power %02x\n", power);
+		dev_dbg(musb->controller, "Root port suspended, power %02x\n", power);
 
 		musb->port1_status |= USB_PORT_STAT_SUSPEND;
-		switch (musb->xceiv.state) {
+		switch (musb->xceiv->state) {
 		case OTG_STATE_A_HOST:
-			musb->xceiv.state = OTG_STATE_A_SUSPEND;
-			musb->is_active = is_otg_enabled(musb)
-					&& musb->xceiv.host->b_hnp_enable;
+			musb->xceiv->state = OTG_STATE_A_SUSPEND;
+			musb->is_active = otg->host->b_hnp_enable;
+			if (musb->is_active)
+				mod_timer(&musb->otg_timer, jiffies
+					+ msecs_to_jiffies(
+						OTG_TIME_A_AIDL_BDIS));
 			musb_platform_try_idle(musb, 0);
 			break;
-#ifdef	CONFIG_USB_MUSB_OTG
 		case OTG_STATE_B_HOST:
-			musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
-			musb->is_active = is_otg_enabled(musb)
-					&& musb->xceiv.host->b_hnp_enable;
+			musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
+			musb->is_active = otg->host->b_hnp_enable;
 			musb_platform_try_idle(musb, 0);
 			break;
-#endif
 		default:
-			DBG(1, "bogus rh suspend? %s\n",
-				otg_state_string(musb));
+			dev_dbg(musb->controller, "bogus rh suspend? %s\n",
+				usb_otg_state_string(musb->xceiv->state));
 		}
 	} else if (power & MUSB_POWER_SUSPENDM) {
 		power &= ~MUSB_POWER_SUSPENDM;
 		power |= MUSB_POWER_RESUME;
 		musb_writeb(mbase, MUSB_POWER, power);
 
-		DBG(3, "Root port resuming, power %02x\n", power);
+		dev_dbg(musb->controller, "Root port resuming, power %02x\n", power);
 
 		/* later, GetPortStatus will stop RESUME signaling */
 		musb->port1_status |= MUSB_PORT_STAT_RESUME;
-		musb->rh_timer = jiffies + msecs_to_jiffies(20);
+		schedule_delayed_work(&musb->finish_resume_work,
+				      msecs_to_jiffies(20));
 	}
 }
 
-static void musb_port_reset(struct musb *musb, bool do_reset)
+void musb_port_reset(struct musb *musb, bool do_reset)
 {
 	u8		power;
 	void __iomem	*mbase = musb->mregs;
 
-#ifdef CONFIG_USB_MUSB_OTG
-	if (musb->xceiv.state == OTG_STATE_B_IDLE) {
-		DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n");
+	if (musb->xceiv->state == OTG_STATE_B_IDLE) {
+		dev_dbg(musb->controller, "HNP: Returning from HNP; no hub reset from b_idle\n");
 		musb->port1_status &= ~USB_PORT_STAT_RESET;
 		return;
 	}
-#endif
 
 	if (!is_host_active(musb))
 		return;
@@ -131,7 +159,6 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
 	 */
 	power = musb_readb(mbase, MUSB_POWER);
 	if (do_reset) {
-
 		/*
 		 * If RESUME is set, we must make sure it stays minimum 20 ms.
 		 * Then we must clear RESUME and wait a bit to let musb start
@@ -140,31 +167,40 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
 		 * detected".
 		 */
 		if (power &  MUSB_POWER_RESUME) {
-			while (time_before(jiffies, musb->rh_timer))
-				msleep(1);
+			long remain = (unsigned long) musb->rh_timer - jiffies;
+
+			if (musb->rh_timer > 0 && remain > 0) {
+				/* take into account the minimum delay after resume */
+				schedule_delayed_work(
+					&musb->deassert_reset_work, remain);
+				return;
+			}
+
 			musb_writeb(mbase, MUSB_POWER,
-				power & ~MUSB_POWER_RESUME);
-			msleep(1);
+				    power & ~MUSB_POWER_RESUME);
+
+			/* Give the core 1 ms to clear MUSB_POWER_RESUME */
+			schedule_delayed_work(&musb->deassert_reset_work,
+					      msecs_to_jiffies(1));
+			return;
 		}
 
-		musb->ignore_disconnect = true;
 		power &= 0xf0;
 		musb_writeb(mbase, MUSB_POWER,
 				power | MUSB_POWER_RESET);
 
 		musb->port1_status |= USB_PORT_STAT_RESET;
 		musb->port1_status &= ~USB_PORT_STAT_ENABLE;
-		musb->rh_timer = jiffies + msecs_to_jiffies(50);
+		schedule_delayed_work(&musb->deassert_reset_work,
+				      msecs_to_jiffies(50));
 	} else {
-		DBG(4, "root port reset stopped\n");
+		dev_dbg(musb->controller, "root port reset stopped\n");
 		musb_writeb(mbase, MUSB_POWER,
 				power & ~MUSB_POWER_RESET);
 
-		musb->ignore_disconnect = false;
-
 		power = musb_readb(mbase, MUSB_POWER);
 		if (power & MUSB_POWER_HSMODE) {
-			DBG(4, "high-speed device connected\n");
+			dev_dbg(musb->controller, "high-speed device connected\n");
 			musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
 		}
 
@@ -172,7 +208,7 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
 		musb->port1_status |= USB_PORT_STAT_ENABLE
 					| (USB_PORT_STAT_C_RESET << 16)
 					| (USB_PORT_STAT_C_ENABLE << 16);
-		usb_hcd_poll_rh_status(musb_to_hcd(musb));
+		usb_hcd_poll_rh_status(musb->hcd);
 
 		musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
 	}
@@ -180,23 +216,32 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
 
 void musb_root_disconnect(struct musb *musb)
 {
-	musb->port1_status = (1 << USB_PORT_FEAT_POWER)
-			| (1 << USB_PORT_FEAT_C_CONNECTION);
+	struct usb_otg	*otg = musb->xceiv->otg;
 
-	usb_hcd_poll_rh_status(musb_to_hcd(musb));
+	musb->port1_status = USB_PORT_STAT_POWER
+			| (USB_PORT_STAT_C_CONNECTION << 16);
+
+	usb_hcd_poll_rh_status(musb->hcd);
 	musb->is_active = 0;
 
-	switch (musb->xceiv.state) {
-	case OTG_STATE_A_HOST:
+	switch (musb->xceiv->state) {
 	case OTG_STATE_A_SUSPEND:
-		musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+		if (otg->host->b_hnp_enable) {
+			musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
+			musb->g.is_a_peripheral = 1;
+			break;
+		}
+		/* FALLTHROUGH */
+	case OTG_STATE_A_HOST:
+		musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
 		musb->is_active = 0;
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
-		musb->xceiv.state = OTG_STATE_B_IDLE;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
 		break;
 	default:
-		DBG(1, "host disconnect (%s)\n", otg_state_string(musb));
+		dev_dbg(musb->controller, "host disconnect (%s)\n",
+			usb_otg_state_string(musb->xceiv->state));
 	}
 }
 
@@ -217,6 +262,23 @@ int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
 	return retval;
 }
 
+static int musb_has_gadget(struct musb *musb)
+{
+	/*
+	 * In host-only mode we start a connection right away. In OTG mode
+	 * we have to wait until we loaded a gadget. We don't really need a
+	 * gadget if we operate as a host but we should not start a session
+	 * as a device without a gadget or else we explode.
+	 */
+#ifdef CONFIG_USB_MUSB_HOST
+	return 1;
+#else
+	if (musb->port_mode == MUSB_PORT_MODE_HOST)
+		return 1;
+	return musb->g.dev.driver != NULL;
+#endif
+}
+
 int musb_hub_control(
 	struct usb_hcd	*hcd,
 	u16		typeReq,
@@ -232,7 +294,7 @@ int musb_hub_control(
 
 	spin_lock_irqsave(&musb->lock, flags);
 
-	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+	if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) {
 		spin_unlock_irqrestore(&musb->lock, flags);
 		return -ESHUTDOWN;
 	}
@@ -263,8 +325,8 @@ int musb_hub_control(
 			musb_port_suspend(musb, false);
 			break;
 		case USB_PORT_FEAT_POWER:
-			if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
-				musb_set_vbus(musb, 0);
+			if (!hcd->self.is_b_host)
+				musb_platform_set_vbus(musb, 0);
 			break;
 		case USB_PORT_FEAT_C_CONNECTION:
 		case USB_PORT_FEAT_C_ENABLE:
@@ -275,7 +337,7 @@ int musb_hub_control(
 		default:
 			goto error;
 		}
-		DBG(5, "clear feature %d\n", wValue);
+		dev_dbg(musb->controller, "clear feature %d\n", wValue);
 		musb->port1_status &= ~(1 << wValue);
 		break;
 	case GetHubDescriptor:
@@ -293,8 +355,8 @@ int musb_hub_control(
 		desc->bHubContrCurrent = 0;
 
 		/* workaround bogus struct definition */
-		desc->DeviceRemovable[0] = 0x02;	/* port 1 */
-		desc->DeviceRemovable[1] = 0xff;
+		desc->u.hs.DeviceRemovable[0] = 0x02;	/* port 1 */
+		desc->u.hs.DeviceRemovable[1] = 0xff;
 		}
 		break;
 	case GetHubStatus:
@@ -305,42 +367,12 @@ int musb_hub_control(
 		if (wIndex != 1)
 			goto error;
 
-		/* finish RESET signaling? */
-		if ((musb->port1_status & USB_PORT_STAT_RESET)
-				&& time_after_eq(jiffies, musb->rh_timer))
-			musb_port_reset(musb, false);
-
-		/* finish RESUME signaling? */
-		if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
-				&& time_after_eq(jiffies, musb->rh_timer)) {
-			u8		power;
-
-			power = musb_readb(musb->mregs, MUSB_POWER);
-			power &= ~MUSB_POWER_RESUME;
-			DBG(4, "root port resume stopped, power %02x\n",
-					power);
-			musb_writeb(musb->mregs, MUSB_POWER, power);
-
-			/* ISSUE:  DaVinci (RTL 1.300) disconnects after
-			 * resume of high speed peripherals (but not full
-			 * speed ones).
-			 */
-
-			musb->is_active = 1;
-			musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
-					| MUSB_PORT_STAT_RESUME);
-			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
-			usb_hcd_poll_rh_status(musb_to_hcd(musb));
-			/* NOTE: it might really be A_WAIT_BCON ... */
-			musb->xceiv.state = OTG_STATE_A_HOST;
-		}
-
 		put_unaligned(cpu_to_le32(musb->port1_status
 					& ~MUSB_PORT_STAT_RESUME),
 				(__le32 *) buf);
 
 		/* port change status is more interesting */
-		DBG(get_unaligned((u16 *)(buf+2)) ? 2 : 5, "port status %08x\n",
+		dev_dbg(musb->controller, "port status %08x\n",
 				musb->port1_status);
 		break;
 	case SetPortFeature:
@@ -359,7 +391,7 @@ int musb_hub_control(
 			 * initialization logic, e.g. for OTG, or change any
 			 * logic relating to VBUS power-up.
 			 */
-			if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
+			if (!hcd->self.is_b_host && musb_has_gadget(musb))
 				musb_start(musb);
 			break;
 		case USB_PORT_FEAT_RESET:
@@ -411,7 +443,7 @@ int musb_hub_control(
 		default:
 			goto error;
 		}
-		DBG(5, "set feature %d\n", wValue);
+		dev_dbg(musb->controller, "set feature %d\n", wValue);
 		musb->port1_status |= 1 << wValue;
 		break;