aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/musb/musb_virthub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb/musb_virthub.c')
-rw-r--r--drivers/usb/musb/musb_virthub.c139
1 files changed, 61 insertions, 78 deletions
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index a523950c2b3..e2d2d8c9891 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -36,7 +36,6 @@
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/errno.h>
-#include <linux/init.h>
#include <linux/time.h>
#include <linux/timer.h>
@@ -44,53 +43,38 @@
#include "musb_core.h"
-/*
-* Program the HDRC to start (enable interrupts, dma, etc.).
-*/
-static void musb_start(struct musb *musb)
+void musb_host_finish_resume(struct work_struct *work)
{
- void __iomem *regs = musb->mregs;
- u8 devctl = musb_readb(regs, MUSB_DEVCTL);
-
- dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
-
- /* Set INT enable registers, enable interrupts */
- musb->intrtxe = musb->epmask;
- musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
- musb->intrrxe = musb->epmask & 0xfffe;
- musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
- musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+ struct musb *musb;
+ unsigned long flags;
+ u8 power;
- musb_writeb(regs, MUSB_TESTMODE, 0);
+ musb = container_of(work, struct musb, finish_resume_work.work);
- /* put into basic highspeed mode and start session */
- musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
- | MUSB_POWER_HSENAB
- /* ENSUSPEND wedges tusb */
- /* | MUSB_POWER_ENSUSPEND */
- );
+ spin_lock_irqsave(&musb->lock, flags);
- musb->is_active = 0;
- devctl = musb_readb(regs, MUSB_DEVCTL);
- devctl &= ~MUSB_DEVCTL_SESSION;
+ power = musb_readb(musb->mregs, MUSB_POWER);
+ power &= ~MUSB_POWER_RESUME;
+ dev_dbg(musb->controller, "root port resume stopped, power %02x\n",
+ power);
+ musb_writeb(musb->mregs, MUSB_POWER, power);
- /* session started after:
- * (a) ID-grounded irq, host mode;
- * (b) vbus present/connect IRQ, peripheral mode;
- * (c) peripheral initiates, using SRP
+ /*
+ * ISSUE: DaVinci (RTL 1.300) disconnects after
+ * resume of high speed peripherals (but not full
+ * speed ones).
*/
- if (musb->port_mode != MUSB_PORT_MODE_HOST &&
- (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
- musb->is_active = 1;
- } else {
- devctl |= MUSB_DEVCTL_SESSION;
- }
+ musb->is_active = 1;
+ musb->port1_status &= ~(USB_PORT_STAT_SUSPEND | MUSB_PORT_STAT_RESUME);
+ musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+ usb_hcd_poll_rh_status(musb->hcd);
+ /* NOTE: it might really be A_WAIT_BCON ... */
+ musb->xceiv->state = OTG_STATE_A_HOST;
- musb_platform_enable(musb);
- musb_writeb(regs, MUSB_DEVCTL, devctl);
+ spin_unlock_irqrestore(&musb->lock, flags);
}
-static void musb_port_suspend(struct musb *musb, bool do_suspend)
+void musb_port_suspend(struct musb *musb, bool do_suspend)
{
struct usb_otg *otg = musb->xceiv->otg;
u8 power;
@@ -151,11 +135,12 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
/* later, GetPortStatus will stop RESUME signaling */
musb->port1_status |= MUSB_PORT_STAT_RESUME;
- musb->rh_timer = jiffies + msecs_to_jiffies(20);
+ schedule_delayed_work(&musb->finish_resume_work,
+ msecs_to_jiffies(20));
}
}
-static void musb_port_reset(struct musb *musb, bool do_reset)
+void musb_port_reset(struct musb *musb, bool do_reset)
{
u8 power;
void __iomem *mbase = musb->mregs;
@@ -174,7 +159,6 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
*/
power = musb_readb(mbase, MUSB_POWER);
if (do_reset) {
-
/*
* If RESUME is set, we must make sure it stays minimum 20 ms.
* Then we must clear RESUME and wait a bit to let musb start
@@ -183,11 +167,22 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
* detected".
*/
if (power & MUSB_POWER_RESUME) {
- while (time_before(jiffies, musb->rh_timer))
- msleep(1);
+ long remain = (unsigned long) musb->rh_timer - jiffies;
+
+ if (musb->rh_timer > 0 && remain > 0) {
+ /* take into account the minimum delay after resume */
+ schedule_delayed_work(
+ &musb->deassert_reset_work, remain);
+ return;
+ }
+
musb_writeb(mbase, MUSB_POWER,
- power & ~MUSB_POWER_RESUME);
- msleep(1);
+ power & ~MUSB_POWER_RESUME);
+
+ /* Give the core 1 ms to clear MUSB_POWER_RESUME */
+ schedule_delayed_work(&musb->deassert_reset_work,
+ msecs_to_jiffies(1));
+ return;
}
power &= 0xf0;
@@ -196,7 +191,8 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
musb->port1_status |= USB_PORT_STAT_RESET;
musb->port1_status &= ~USB_PORT_STAT_ENABLE;
- musb->rh_timer = jiffies + msecs_to_jiffies(50);
+ schedule_delayed_work(&musb->deassert_reset_work,
+ msecs_to_jiffies(50));
} else {
dev_dbg(musb->controller, "root port reset stopped\n");
musb_writeb(mbase, MUSB_POWER,
@@ -266,6 +262,23 @@ int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
return retval;
}
+static int musb_has_gadget(struct musb *musb)
+{
+ /*
+ * In host-only mode we start a connection right away. In OTG mode
+ * we have to wait until we loaded a gadget. We don't really need a
+ * gadget if we operate as a host but we should not start a session
+ * as a device without a gadget or else we explode.
+ */
+#ifdef CONFIG_USB_MUSB_HOST
+ return 1;
+#else
+ if (musb->port_mode == MUSB_PORT_MODE_HOST)
+ return 1;
+ return musb->g.dev.driver != NULL;
+#endif
+}
+
int musb_hub_control(
struct usb_hcd *hcd,
u16 typeReq,
@@ -354,36 +367,6 @@ int musb_hub_control(
if (wIndex != 1)
goto error;
- /* finish RESET signaling? */
- if ((musb->port1_status & USB_PORT_STAT_RESET)
- && time_after_eq(jiffies, musb->rh_timer))
- musb_port_reset(musb, false);
-
- /* finish RESUME signaling? */
- if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
- && time_after_eq(jiffies, musb->rh_timer)) {
- u8 power;
-
- power = musb_readb(musb->mregs, MUSB_POWER);
- power &= ~MUSB_POWER_RESUME;
- dev_dbg(musb->controller, "root port resume stopped, power %02x\n",
- power);
- musb_writeb(musb->mregs, MUSB_POWER, power);
-
- /* ISSUE: DaVinci (RTL 1.300) disconnects after
- * resume of high speed peripherals (but not full
- * speed ones).
- */
-
- musb->is_active = 1;
- musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
- | MUSB_PORT_STAT_RESUME);
- musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
- usb_hcd_poll_rh_status(musb->hcd);
- /* NOTE: it might really be A_WAIT_BCON ... */
- musb->xceiv->state = OTG_STATE_A_HOST;
- }
-
put_unaligned(cpu_to_le32(musb->port1_status
& ~MUSB_PORT_STAT_RESUME),
(__le32 *) buf);
@@ -408,7 +391,7 @@ int musb_hub_control(
* initialization logic, e.g. for OTG, or change any
* logic relating to VBUS power-up.
*/
- if (!hcd->self.is_b_host)
+ if (!hcd->self.is_b_host && musb_has_gadget(musb))
musb_start(musb);
break;
case USB_PORT_FEAT_RESET:
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-05 08:51:12 +0000