aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/musb/musb_virthub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb/musb_virthub.c')
-rw-r--r--drivers/usb/musb/musb_virthub.c121
1 files changed, 73 insertions, 48 deletions
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index f70579154de..e2d2d8c9891 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -36,7 +36,6 @@
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/errno.h>
-#include <linux/init.h>
#include <linux/time.h>
#include <linux/timer.h>
@@ -44,8 +43,38 @@
#include "musb_core.h"
+void musb_host_finish_resume(struct work_struct *work)
+{
+ struct musb *musb;
+ unsigned long flags;
+ u8 power;
+
+ musb = container_of(work, struct musb, finish_resume_work.work);
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ power = musb_readb(musb->mregs, MUSB_POWER);
+ power &= ~MUSB_POWER_RESUME;
+ dev_dbg(musb->controller, "root port resume stopped, power %02x\n",
+ power);
+ musb_writeb(musb->mregs, MUSB_POWER, power);
+
+ /*
+ * ISSUE: DaVinci (RTL 1.300) disconnects after
+ * resume of high speed peripherals (but not full
+ * speed ones).
+ */
+ musb->is_active = 1;
+ musb->port1_status &= ~(USB_PORT_STAT_SUSPEND | MUSB_PORT_STAT_RESUME);
+ musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+ usb_hcd_poll_rh_status(musb->hcd);
+ /* NOTE: it might really be A_WAIT_BCON ... */
+ musb->xceiv->state = OTG_STATE_A_HOST;
-static void musb_port_suspend(struct musb *musb, bool do_suspend)
+ spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+void musb_port_suspend(struct musb *musb, bool do_suspend)
{
struct usb_otg *otg = musb->xceiv->otg;
u8 power;
@@ -95,7 +124,7 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
break;
default:
dev_dbg(musb->controller, "bogus rh suspend? %s\n",
- otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->state));
}
} else if (power & MUSB_POWER_SUSPENDM) {
power &= ~MUSB_POWER_SUSPENDM;
@@ -106,11 +135,12 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
/* later, GetPortStatus will stop RESUME signaling */
musb->port1_status |= MUSB_PORT_STAT_RESUME;
- musb->rh_timer = jiffies + msecs_to_jiffies(20);
+ schedule_delayed_work(&musb->finish_resume_work,
+ msecs_to_jiffies(20));
}
}
-static void musb_port_reset(struct musb *musb, bool do_reset)
+void musb_port_reset(struct musb *musb, bool do_reset)
{
u8 power;
void __iomem *mbase = musb->mregs;
@@ -129,7 +159,6 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
*/
power = musb_readb(mbase, MUSB_POWER);
if (do_reset) {
-
/*
* If RESUME is set, we must make sure it stays minimum 20 ms.
* Then we must clear RESUME and wait a bit to let musb start
@@ -138,28 +167,37 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
* detected".
*/
if (power & MUSB_POWER_RESUME) {
- while (time_before(jiffies, musb->rh_timer))
- msleep(1);
+ long remain = (unsigned long) musb->rh_timer - jiffies;
+
+ if (musb->rh_timer > 0 && remain > 0) {
+ /* take into account the minimum delay after resume */
+ schedule_delayed_work(
+ &musb->deassert_reset_work, remain);
+ return;
+ }
+
musb_writeb(mbase, MUSB_POWER,
- power & ~MUSB_POWER_RESUME);
- msleep(1);
+ power & ~MUSB_POWER_RESUME);
+
+ /* Give the core 1 ms to clear MUSB_POWER_RESUME */
+ schedule_delayed_work(&musb->deassert_reset_work,
+ msecs_to_jiffies(1));
+ return;
}
- musb->ignore_disconnect = true;
power &= 0xf0;
musb_writeb(mbase, MUSB_POWER,
power | MUSB_POWER_RESET);
musb->port1_status |= USB_PORT_STAT_RESET;
musb->port1_status &= ~USB_PORT_STAT_ENABLE;
- musb->rh_timer = jiffies + msecs_to_jiffies(50);
+ schedule_delayed_work(&musb->deassert_reset_work,
+ msecs_to_jiffies(50));
} else {
dev_dbg(musb->controller, "root port reset stopped\n");
musb_writeb(mbase, MUSB_POWER,
power & ~MUSB_POWER_RESET);
- musb->ignore_disconnect = false;
-
power = musb_readb(mbase, MUSB_POWER);
if (power & MUSB_POWER_HSMODE) {
dev_dbg(musb->controller, "high-speed device connected\n");
@@ -170,7 +208,7 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
musb->port1_status |= USB_PORT_STAT_ENABLE
| (USB_PORT_STAT_C_RESET << 16)
| (USB_PORT_STAT_C_ENABLE << 16);
- usb_hcd_poll_rh_status(musb_to_hcd(musb));
+ usb_hcd_poll_rh_status(musb->hcd);
musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
}
@@ -183,7 +221,7 @@ void musb_root_disconnect(struct musb *musb)
musb->port1_status = USB_PORT_STAT_POWER
| (USB_PORT_STAT_C_CONNECTION << 16);
- usb_hcd_poll_rh_status(musb_to_hcd(musb));
+ usb_hcd_poll_rh_status(musb->hcd);
musb->is_active = 0;
switch (musb->xceiv->state) {
@@ -203,7 +241,7 @@ void musb_root_disconnect(struct musb *musb)
break;
default:
dev_dbg(musb->controller, "host disconnect (%s)\n",
- otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->state));
}
}
@@ -224,6 +262,23 @@ int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
return retval;
}
+static int musb_has_gadget(struct musb *musb)
+{
+ /*
+ * In host-only mode we start a connection right away. In OTG mode
+ * we have to wait until we loaded a gadget. We don't really need a
+ * gadget if we operate as a host but we should not start a session
+ * as a device without a gadget or else we explode.
+ */
+#ifdef CONFIG_USB_MUSB_HOST
+ return 1;
+#else
+ if (musb->port_mode == MUSB_PORT_MODE_HOST)
+ return 1;
+ return musb->g.dev.driver != NULL;
+#endif
+}
+
int musb_hub_control(
struct usb_hcd *hcd,
u16 typeReq,
@@ -312,36 +367,6 @@ int musb_hub_control(
if (wIndex != 1)
goto error;
- /* finish RESET signaling? */
- if ((musb->port1_status & USB_PORT_STAT_RESET)
- && time_after_eq(jiffies, musb->rh_timer))
- musb_port_reset(musb, false);
-
- /* finish RESUME signaling? */
- if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
- && time_after_eq(jiffies, musb->rh_timer)) {
- u8 power;
-
- power = musb_readb(musb->mregs, MUSB_POWER);
- power &= ~MUSB_POWER_RESUME;
- dev_dbg(musb->controller, "root port resume stopped, power %02x\n",
- power);
- musb_writeb(musb->mregs, MUSB_POWER, power);
-
- /* ISSUE: DaVinci (RTL 1.300) disconnects after
- * resume of high speed peripherals (but not full
- * speed ones).
- */
-
- musb->is_active = 1;
- musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
- | MUSB_PORT_STAT_RESUME);
- musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
- usb_hcd_poll_rh_status(musb_to_hcd(musb));
- /* NOTE: it might really be A_WAIT_BCON ... */
- musb->xceiv->state = OTG_STATE_A_HOST;
- }
-
put_unaligned(cpu_to_le32(musb->port1_status
& ~MUSB_PORT_STAT_RESUME),
(__le32 *) buf);
@@ -366,7 +391,7 @@ int musb_hub_control(
* initialization logic, e.g. for OTG, or change any
* logic relating to VBUS power-up.
*/
- if (!hcd->self.is_b_host)
+ if (!hcd->self.is_b_host && musb_has_gadget(musb))
musb_start(musb);
break;
case USB_PORT_FEAT_RESET:
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 14:28:16 +0000