diff options
Diffstat (limited to 'drivers/usb/musb/musb_gadget.c')
| -rw-r--r-- | drivers/usb/musb/musb_gadget.c | 28 |
1 files changed, 23 insertions, 5 deletions
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 9a08679d204..d4aa779339f 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1121,7 +1121,7 @@ static int musb_gadget_enable(struct usb_ep *ep, case USB_ENDPOINT_XFER_BULK: s = "bulk"; break; case USB_ENDPOINT_XFER_INT: s = "int"; break; default: s = "iso"; break; - }; s; }), + } s; }), musb_ep->is_in ? "IN" : "OUT", musb_ep->dma ? "dma, " : "", musb_ep->packet_sz); @@ -1727,14 +1727,14 @@ init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in) ep->end_point.name = ep->name; INIT_LIST_HEAD(&ep->end_point.ep_list); if (!epnum) { - ep->end_point.maxpacket = 64; + usb_ep_set_maxpacket_limit(&ep->end_point, 64); ep->end_point.ops = &musb_g_ep0_ops; musb->g.ep0 = &ep->end_point; } else { if (is_in) - ep->end_point.maxpacket = hw_ep->max_packet_sz_tx; + usb_ep_set_maxpacket_limit(&ep->end_point, hw_ep->max_packet_sz_tx); else - ep->end_point.maxpacket = hw_ep->max_packet_sz_rx; + usb_ep_set_maxpacket_limit(&ep->end_point, hw_ep->max_packet_sz_rx); ep->end_point.ops = &musb_ep_ops; list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list); } @@ -1790,9 +1790,17 @@ int musb_gadget_setup(struct musb *musb) musb->g.max_speed = USB_SPEED_HIGH; musb->g.speed = USB_SPEED_UNKNOWN; + MUSB_DEV_MODE(musb); + musb->xceiv->otg->default_a = 0; + musb->xceiv->state = OTG_STATE_B_IDLE; + /* this "gadget" abstracts/virtualizes the controller */ musb->g.name = musb_driver_name; +#if IS_ENABLED(CONFIG_USB_MUSB_DUAL_ROLE) musb->g.is_otg = 1; +#elif IS_ENABLED(CONFIG_USB_MUSB_GADGET) + musb->g.is_otg = 0; +#endif musb_g_init_endpoints(musb); @@ -1855,6 +1863,8 @@ static int musb_gadget_start(struct usb_gadget *g, musb->xceiv->state = OTG_STATE_B_IDLE; spin_unlock_irqrestore(&musb->lock, flags); + musb_start(musb); + /* REVISIT: funcall to other code, which also * handles power budgeting ... this way also * ensures HdrcStart is indirectly called. @@ -2109,7 +2119,15 @@ __acquires(musb->lock) /* Normal reset, as B-Device; * or else after HNP, as A-Device */ - if (devctl & MUSB_DEVCTL_BDEVICE) { + if (!musb->g.is_otg) { + /* USB device controllers that are not OTG compatible + * may not have DEVCTL register in silicon. + * In that case, do not rely on devctl for setting + * peripheral mode. + */ + musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + musb->g.is_a_peripheral = 0; + } else if (devctl & MUSB_DEVCTL_BDEVICE) { musb->xceiv->state = OTG_STATE_B_PERIPHERAL; musb->g.is_a_peripheral = 0; } else { |