diff options
Diffstat (limited to 'drivers/usb/musb/musb_core.h')
| -rw-r--r-- | drivers/usb/musb/musb_core.h | 356 |
1 files changed, 195 insertions, 161 deletions
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index efb39b5e55b..d155a156f24 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -38,20 +38,30 @@ #include <linux/slab.h> #include <linux/list.h> #include <linux/interrupt.h> -#include <linux/smp_lock.h> #include <linux/errno.h> -#include <linux/clk.h> +#include <linux/timer.h> #include <linux/device.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/usb.h> #include <linux/usb/otg.h> #include <linux/usb/musb.h> +#include <linux/phy/phy.h> +#include <linux/workqueue.h> struct musb; struct musb_hw_ep; struct musb_ep; +/* Helper defines for struct musb->hwvers */ +#define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f) +#define MUSB_HWVERS_MINOR(x) (x & 0x3ff) +#define MUSB_HWVERS_RC 0x8000 +#define MUSB_HWVERS_1300 0x52C +#define MUSB_HWVERS_1400 0x590 +#define MUSB_HWVERS_1800 0x720 +#define MUSB_HWVERS_1900 0x784 +#define MUSB_HWVERS_2000 0x800 #include "musb_debug.h" #include "musb_dma.h" @@ -60,95 +70,20 @@ struct musb_ep; #include "musb_regs.h" #include "musb_gadget.h" -#include "../core/hcd.h" +#include <linux/usb/hcd.h> #include "musb_host.h" - - -#ifdef CONFIG_USB_MUSB_OTG - -#define is_peripheral_enabled(musb) ((musb)->board_mode != MUSB_HOST) -#define is_host_enabled(musb) ((musb)->board_mode != MUSB_PERIPHERAL) -#define is_otg_enabled(musb) ((musb)->board_mode == MUSB_OTG) - /* NOTE: otg and peripheral-only state machines start at B_IDLE. * OTG or host-only go to A_IDLE when ID is sensed. */ #define is_peripheral_active(m) (!(m)->is_host) #define is_host_active(m) ((m)->is_host) -#else -#define is_peripheral_enabled(musb) is_peripheral_capable() -#define is_host_enabled(musb) is_host_capable() -#define is_otg_enabled(musb) 0 - -#define is_peripheral_active(musb) is_peripheral_capable() -#define is_host_active(musb) is_host_capable() -#endif - -#if defined(CONFIG_USB_MUSB_OTG) || defined(CONFIG_USB_MUSB_PERIPHERAL) -/* for some reason, the "select USB_GADGET_MUSB_HDRC" doesn't always - * override that choice selection (often USB_GADGET_DUMMY_HCD). - */ -#ifndef CONFIG_USB_GADGET_MUSB_HDRC -#error bogus Kconfig output ... select CONFIG_USB_GADGET_MUSB_HDRC -#endif -#endif /* need MUSB gadget selection */ - - -#ifdef CONFIG_PROC_FS -#include <linux/fs.h> -#define MUSB_CONFIG_PROC_FS -#endif - -/****************************** PERIPHERAL ROLE *****************************/ - -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - -#define is_peripheral_capable() (1) - -extern irqreturn_t musb_g_ep0_irq(struct musb *); -extern void musb_g_tx(struct musb *, u8); -extern void musb_g_rx(struct musb *, u8); -extern void musb_g_reset(struct musb *); -extern void musb_g_suspend(struct musb *); -extern void musb_g_resume(struct musb *); -extern void musb_g_wakeup(struct musb *); -extern void musb_g_disconnect(struct musb *); - -#else - -#define is_peripheral_capable() (0) - -static inline irqreturn_t musb_g_ep0_irq(struct musb *m) { return IRQ_NONE; } -static inline void musb_g_reset(struct musb *m) {} -static inline void musb_g_suspend(struct musb *m) {} -static inline void musb_g_resume(struct musb *m) {} -static inline void musb_g_wakeup(struct musb *m) {} -static inline void musb_g_disconnect(struct musb *m) {} - -#endif - -/****************************** HOST ROLE ***********************************/ - -#ifdef CONFIG_USB_MUSB_HDRC_HCD - -#define is_host_capable() (1) - -extern irqreturn_t musb_h_ep0_irq(struct musb *); -extern void musb_host_tx(struct musb *, u8); -extern void musb_host_rx(struct musb *, u8); - -#else - -#define is_host_capable() (0) - -static inline irqreturn_t musb_h_ep0_irq(struct musb *m) { return IRQ_NONE; } -static inline void musb_host_tx(struct musb *m, u8 e) {} -static inline void musb_host_rx(struct musb *m, u8 e) {} - -#endif - +enum { + MUSB_PORT_MODE_HOST = 1, + MUSB_PORT_MODE_GADGET, + MUSB_PORT_MODE_DUAL_ROLE, +}; /****************************** CONSTANTS ********************************/ @@ -171,7 +106,8 @@ enum musb_h_ep0_state { /* peripheral side ep0 states */ enum musb_g_ep0_state { - MUSB_EP0_STAGE_SETUP, /* idle, waiting for setup */ + MUSB_EP0_STAGE_IDLE, /* idle, waiting for SETUP */ + MUSB_EP0_STAGE_SETUP, /* received SETUP */ MUSB_EP0_STAGE_TX, /* IN data */ MUSB_EP0_STAGE_RX, /* OUT data */ MUSB_EP0_STAGE_STATUSIN, /* (after OUT data) */ @@ -179,10 +115,15 @@ enum musb_g_ep0_state { MUSB_EP0_STAGE_ACKWAIT, /* after zlp, before statusin */ } __attribute__ ((packed)); -/* OTG protocol constants */ +/* + * OTG protocol constants. See USB OTG 1.3 spec, + * sections 5.5 "Device Timings" and 6.6.5 "Timers". + */ #define OTG_TIME_A_WAIT_VRISE 100 /* msec (max) */ -#define OTG_TIME_A_WAIT_BCON 0 /* 0=infinite; min 1000 msec */ -#define OTG_TIME_A_IDLE_BDIS 200 /* msec (min) */ +#define OTG_TIME_A_WAIT_BCON 1100 /* min 1 second */ +#define OTG_TIME_A_AIDL_BDIS 200 /* min 200 msec */ +#define OTG_TIME_B_ASE0_BRST 100 /* min 3.125 ms */ + /*************************** REGISTER ACCESS ********************************/ @@ -190,8 +131,9 @@ enum musb_g_ep0_state { * directly with the "flat" model, or after setting up an index register. */ -#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \ - || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_BLACKFIN) +#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_SOC_OMAP2430) \ + || defined(CONFIG_SOC_OMAP3430) || defined(CONFIG_BLACKFIN) \ + || defined(CONFIG_ARCH_OMAP4) /* REVISIT indexed access seemed to * misbehave (on DaVinci) for at least peripheral IN ... */ @@ -199,7 +141,8 @@ enum musb_g_ep0_state { #endif /* TUSB mapping: "flat" plus ep0 special cases */ -#if defined(CONFIG_USB_TUSB6010) +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) #define musb_ep_select(_mbase, _epnum) \ musb_writeb((_mbase), MUSB_INDEX, (_epnum)) #define MUSB_EP_OFFSET MUSB_TUSB_OFFSET @@ -230,6 +173,35 @@ enum musb_g_ep0_state { /******************************** TYPES *************************************/ +/** + * struct musb_platform_ops - Operations passed to musb_core by HW glue layer + * @init: turns on clocks, sets up platform-specific registers, etc + * @exit: undoes @init + * @set_mode: forcefully changes operating mode + * @try_ilde: tries to idle the IP + * @vbus_status: returns vbus status if possible + * @set_vbus: forces vbus status + * @adjust_channel_params: pre check for standard dma channel_program func + */ +struct musb_platform_ops { + int (*init)(struct musb *musb); + int (*exit)(struct musb *musb); + + void (*enable)(struct musb *musb); + void (*disable)(struct musb *musb); + + int (*set_mode)(struct musb *musb, u8 mode); + void (*try_idle)(struct musb *musb, unsigned long timeout); + void (*reset)(struct musb *musb); + + int (*vbus_status)(struct musb *musb); + void (*set_vbus)(struct musb *musb, int on); + + int (*adjust_channel_params)(struct dma_channel *channel, + u16 packet_sz, u8 *mode, + dma_addr_t *dma_addr, u32 *len); +}; + /* * struct musb_hw_ep - endpoint hardware (bidirectional) * @@ -240,7 +212,8 @@ struct musb_hw_ep { void __iomem *fifo; void __iomem *regs; -#ifdef CONFIG_USB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) void __iomem *conf; #endif @@ -257,14 +230,14 @@ struct musb_hw_ep { struct dma_channel *tx_channel; struct dma_channel *rx_channel; -#ifdef CONFIG_USB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) /* TUSB has "asynchronous" and "synchronous" dma modes */ dma_addr_t fifo_async; dma_addr_t fifo_sync; void __iomem *fifo_sync_va; #endif -#ifdef CONFIG_USB_MUSB_HDRC_HCD void __iomem *target_regs; /* currently scheduled peripheral endpoint */ @@ -273,49 +246,69 @@ struct musb_hw_ep { u8 rx_reinit; u8 tx_reinit; -#endif -#ifdef CONFIG_USB_GADGET_MUSB_HDRC /* peripheral side */ struct musb_ep ep_in; /* TX */ struct musb_ep ep_out; /* RX */ -#endif }; -static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep) +static inline struct musb_request *next_in_request(struct musb_hw_ep *hw_ep) { -#ifdef CONFIG_USB_GADGET_MUSB_HDRC return next_request(&hw_ep->ep_in); -#else - return NULL; -#endif } -static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep) +static inline struct musb_request *next_out_request(struct musb_hw_ep *hw_ep) { -#ifdef CONFIG_USB_GADGET_MUSB_HDRC return next_request(&hw_ep->ep_out); -#else - return NULL; -#endif } +struct musb_csr_regs { + /* FIFO registers */ + u16 txmaxp, txcsr, rxmaxp, rxcsr; + u16 rxfifoadd, txfifoadd; + u8 txtype, txinterval, rxtype, rxinterval; + u8 rxfifosz, txfifosz; + u8 txfunaddr, txhubaddr, txhubport; + u8 rxfunaddr, rxhubaddr, rxhubport; +}; + +struct musb_context_registers { + + u8 power; + u8 intrusbe; + u16 frame; + u8 index, testmode; + + u8 devctl, busctl, misc; + u32 otg_interfsel; + + struct musb_csr_regs index_regs[MUSB_C_NUM_EPS]; +}; + /* * struct musb - Driver instance data. */ struct musb { /* device lock */ spinlock_t lock; - struct clk *clock; + + const struct musb_platform_ops *ops; + struct musb_context_registers context; + irqreturn_t (*isr)(int, void *); struct work_struct irq_work; + struct work_struct recover_work; + struct delayed_work deassert_reset_work; + struct delayed_work finish_resume_work; + u16 hwvers; + u16 intrrxe; + u16 intrtxe; /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */ #define MUSB_PORT_STAT_RESUME (1 << 31) u32 port1_status; -#ifdef CONFIG_USB_MUSB_HDRC_HCD unsigned long rh_timer; enum musb_h_ep0_state ep0_stage; @@ -331,12 +324,9 @@ struct musb { struct list_head control; /* of musb_qh */ struct list_head in_bulk; /* of musb_qh */ struct list_head out_bulk; /* of musb_qh */ -#endif - /* called with IRQs blocked; ON/nonzero implies starting a session, - * and waiting at least a_wait_vrise_tmout. - */ - void (*board_set_vbus)(struct musb *, int is_on); + struct timer_list otg_timer; + struct notifier_block nb; struct dma_controller *dma_controller; @@ -344,10 +334,12 @@ struct musb { void __iomem *ctrl_base; void __iomem *mregs; -#ifdef CONFIG_USB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) dma_addr_t async; dma_addr_t sync; void __iomem *sync_va; + u8 tusb_revision; #endif /* passed down from chip/board specific irq handlers */ @@ -355,7 +347,8 @@ struct musb { u16 int_rx; u16 int_tx; - struct otg_transceiver xceiv; + struct usb_phy *xceiv; + struct phy *phy; int nIrq; unsigned irq_wake:1; @@ -368,13 +361,11 @@ struct musb { u16 epmask; u8 nr_endpoints; - u8 board_mode; /* enum musb_mode */ int (*board_set_power)(int state); - int (*set_clock)(struct clk *clk, int is_active); - u8 min_power; /* vbus for periph, in mA/2 */ + int port_mode; /* MUSB_PORT_MODE_* */ bool is_host; int a_wait_bcon; /* VBUS timeout in msecs */ @@ -384,25 +375,19 @@ struct musb { unsigned is_active:1; unsigned is_multipoint:1; - unsigned ignore_disconnect:1; /* during bus resets */ -#ifdef C_MP_TX - unsigned bulk_split:1; + unsigned hb_iso_rx:1; /* high bandwidth iso rx? */ + unsigned hb_iso_tx:1; /* high bandwidth iso tx? */ + unsigned dyn_fifo:1; /* dynamic FIFO supported? */ + + unsigned bulk_split:1; #define can_bulk_split(musb,type) \ - (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split) -#else -#define can_bulk_split(musb, type) 0 -#endif + (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split) -#ifdef C_MP_RX - unsigned bulk_combine:1; + unsigned bulk_combine:1; #define can_bulk_combine(musb,type) \ - (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine) -#else -#define can_bulk_combine(musb, type) 0 -#endif + (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine) -#ifdef CONFIG_USB_GADGET_MUSB_HDRC /* is_suspended means USB B_PERIPHERAL suspend */ unsigned is_suspended:1; @@ -426,26 +411,33 @@ struct musb { enum musb_g_ep0_state ep0_state; struct usb_gadget g; /* the gadget */ struct usb_gadget_driver *gadget_driver; /* its driver */ -#endif + struct usb_hcd *hcd; /* the usb hcd */ + + /* + * FIXME: Remove this flag. + * + * This is only added to allow Blackfin to work + * with current driver. For some unknown reason + * Blackfin doesn't work with double buffering + * and that's enabled by default. + * + * We added this flag to forcefully disable double + * buffering until we get it working. + */ + unsigned double_buffer_not_ok:1; struct musb_hdrc_config *config; -#ifdef MUSB_CONFIG_PROC_FS - struct proc_dir_entry *proc_entry; + int xceiv_old_state; +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs_root; #endif }; -static inline void musb_set_vbus(struct musb *musb, int is_on) -{ - musb->board_set_vbus(musb, is_on); -} - -#ifdef CONFIG_USB_GADGET_MUSB_HDRC static inline struct musb *gadget_to_musb(struct usb_gadget *g) { return container_of(g, struct musb, g); } -#endif #ifdef CONFIG_BLACKFIN static inline int musb_read_fifosize(struct musb *musb, @@ -478,7 +470,7 @@ static inline void musb_configure_ep0(struct musb *musb) static inline int musb_read_fifosize(struct musb *musb, struct musb_hw_ep *hw_ep, u8 epnum) { - void *mbase = musb->mregs; + void __iomem *mbase = musb->mregs; u8 reg = 0; /* read from core using indexed model */ @@ -518,8 +510,8 @@ static inline void musb_configure_ep0(struct musb *musb) extern const char musb_driver_name[]; -extern void musb_start(struct musb *musb); extern void musb_stop(struct musb *musb); +extern void musb_start(struct musb *musb); extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst); @@ -528,27 +520,69 @@ extern void musb_load_testpacket(struct musb *); extern irqreturn_t musb_interrupt(struct musb *); -extern void musb_platform_enable(struct musb *musb); -extern void musb_platform_disable(struct musb *musb); - extern void musb_hnp_stop(struct musb *musb); -extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode); +static inline void musb_platform_set_vbus(struct musb *musb, int is_on) +{ + if (musb->ops->set_vbus) + musb->ops->set_vbus(musb, is_on); +} -#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \ - defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) -extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout); -#else -#define musb_platform_try_idle(x, y) do {} while (0) -#endif +static inline void musb_platform_enable(struct musb *musb) +{ + if (musb->ops->enable) + musb->ops->enable(musb); +} -#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) -extern int musb_platform_get_vbus_status(struct musb *musb); -#else -#define musb_platform_get_vbus_status(x) 0 -#endif +static inline void musb_platform_disable(struct musb *musb) +{ + if (musb->ops->disable) + musb->ops->disable(musb); +} + +static inline int musb_platform_set_mode(struct musb *musb, u8 mode) +{ + if (!musb->ops->set_mode) + return 0; -extern int __init musb_platform_init(struct musb *musb); -extern int musb_platform_exit(struct musb *musb); + return musb->ops->set_mode(musb, mode); +} + +static inline void musb_platform_try_idle(struct musb *musb, + unsigned long timeout) +{ + if (musb->ops->try_idle) + musb->ops->try_idle(musb, timeout); +} + +static inline void musb_platform_reset(struct musb *musb) +{ + if (musb->ops->reset) + musb->ops->reset(musb); +} + +static inline int musb_platform_get_vbus_status(struct musb *musb) +{ + if (!musb->ops->vbus_status) + return 0; + + return musb->ops->vbus_status(musb); +} + +static inline int musb_platform_init(struct musb *musb) +{ + if (!musb->ops->init) + return -EINVAL; + + return musb->ops->init(musb); +} + +static inline int musb_platform_exit(struct musb *musb) +{ + if (!musb->ops->exit) + return -EINVAL; + + return musb->ops->exit(musb); +} #endif /* __MUSB_CORE_H__ */ |