1 files changed, 213 insertions, 60 deletions

diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index fcb5206a65b..d40d5f0b552 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -11,21 +11,34 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/init.h>
 #include <linux/list.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/prefetch.h>
+#include <linux/usb/usb_phy_generic.h>
 
 #include <asm/cacheflush.h>
 
 #include "musb_core.h"
+#include "musbhsdma.h"
 #include "blackfin.h"
 
+struct bfin_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct platform_device	*phy;
+};
+#define glue_to_musb(g)		platform_get_drvdata(g->musb)
+
 /*
  * Load an endpoint's FIFO
  */
 void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 {
+	struct musb *musb = hw_ep->musb;
 	void __iomem *fifo = hw_ep->fifo;
 	void __iomem *epio = hw_ep->regs;
 	u8 epnum = hw_ep->epnum;
@@ -34,7 +47,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 
 	musb_writew(epio, MUSB_TXCOUNT, len);
 
-	DBG(4, "TX ep%d fifo %p count %d buf %p, epio %p\n",
+	dev_dbg(musb->controller, "TX ep%d fifo %p count %d buf %p, epio %p\n",
 			hw_ep->epnum, fifo, len, src, epio);
 
 	dump_fifo_data(src, len);
@@ -64,7 +77,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
 		SSYNC();
 
-		/* Wait for compelete */
+		/* Wait for complete */
 		while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
 			cpu_relax();
 
@@ -89,6 +102,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
  */
 void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 {
+	struct musb *musb = hw_ep->musb;
 	void __iomem *fifo = hw_ep->fifo;
 	u8 epnum = hw_ep->epnum;
 
@@ -117,7 +131,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
 		SSYNC();
 
-		/* Wait for compelete */
+		/* Wait for complete */
 		while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
 			cpu_relax();
 
@@ -145,7 +159,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 				*(dst + len - 1) = (u8)inw((unsigned long)fifo + 4);
 		}
 	}
-	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+	dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
 			'R', hw_ep->epnum, fifo, len, dst);
 
 	dump_fifo_data(dst, len);
@@ -171,8 +185,8 @@ static irqreturn_t blackfin_interrupt(int irq, void *__hci)
 	}
 
 	/* Start sampling ID pin, when plug is removed from MUSB */
-	if ((is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE
-		|| musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) ||
+	if ((musb->xceiv->state == OTG_STATE_B_IDLE
+		|| musb->xceiv->state == OTG_STATE_A_WAIT_BCON) ||
 		(musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) {
 		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
 		musb->a_wait_bcon = TIMER_DELAY;
@@ -215,18 +229,13 @@ static void musb_conn_timer_handler(unsigned long _musb)
 
 			val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
 			musb_writeb(musb->mregs, MUSB_INTRUSB, val);
-			if (is_otg_enabled(musb))
-				musb->xceiv->state = OTG_STATE_B_IDLE;
-			else
-				musb_writeb(musb->mregs, MUSB_POWER, MUSB_POWER_HSENAB);
+			musb->xceiv->state = OTG_STATE_B_IDLE;
 		}
 		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
 		break;
 	case OTG_STATE_B_IDLE:
-
-		if (!is_peripheral_enabled(musb))
-			break;
-		/* Start a new session.  It seems that MUSB needs taking
+		/*
+		 * Start a new session.  It seems that MUSB needs taking
 		 * some time to recognize the type of the plug inserted?
 		 */
 		val = musb_readw(musb->mregs, MUSB_DEVCTL);
@@ -270,61 +279,75 @@ static void musb_conn_timer_handler(unsigned long _musb)
 		}
 		break;
 	default:
-		DBG(1, "%s state not handled\n", otg_state_string(musb));
+		dev_dbg(musb->controller, "%s state not handled\n",
+			usb_otg_state_string(musb->xceiv->state));
 		break;
 	}
 	spin_unlock_irqrestore(&musb->lock, flags);
 
-	DBG(4, "state is %s\n", otg_state_string(musb));
+	dev_dbg(musb->controller, "state is %s\n",
+		usb_otg_state_string(musb->xceiv->state));
 }
 
-void musb_platform_enable(struct musb *musb)
+static void bfin_musb_enable(struct musb *musb)
 {
-	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
-		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
-		musb->a_wait_bcon = TIMER_DELAY;
-	}
+	/* REVISIT is this really correct ? */
 }
 
-void musb_platform_disable(struct musb *musb)
+static void bfin_musb_disable(struct musb *musb)
 {
 }
 
-static void bfin_set_vbus(struct musb *musb, int is_on)
+static void bfin_musb_set_vbus(struct musb *musb, int is_on)
 {
 	int value = musb->config->gpio_vrsel_active;
 	if (!is_on)
 		value = !value;
 	gpio_set_value(musb->config->gpio_vrsel, value);
 
-	DBG(1, "VBUS %s, devctl %02x "
+	dev_dbg(musb->controller, "VBUS %s, devctl %02x "
 		/* otg %3x conf %08x prcm %08x */ "\n",
-		otg_state_string(musb),
+		usb_otg_state_string(musb->xceiv->state),
 		musb_readb(musb->mregs, MUSB_DEVCTL));
 }
 
-static int bfin_set_power(struct otg_transceiver *x, unsigned mA)
+static int bfin_musb_set_power(struct usb_phy *x, unsigned mA)
 {
 	return 0;
 }
 
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static int bfin_musb_vbus_status(struct musb *musb)
 {
-	if (!is_otg_enabled(musb) && is_host_enabled(musb))
-		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
+	return 0;
 }
 
-int musb_platform_get_vbus_status(struct musb *musb)
+static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
-	return 0;
+	return -EIO;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int bfin_musb_adjust_channel_params(struct dma_channel *channel,
+				u16 packet_sz, u8 *mode,
+				dma_addr_t *dma_addr, u32 *len)
 {
-	return -EIO;
+	struct musb_dma_channel *musb_channel = channel->private_data;
+
+	/*
+	 * Anomaly 05000450 might cause data corruption when using DMA
+	 * MODE 1 transmits with short packet.  So to work around this,
+	 * we truncate all MODE 1 transfers down to a multiple of the
+	 * max packet size, and then do the last short packet transfer
+	 * (if there is any) using MODE 0.
+	 */
+	if (ANOMALY_05000450) {
+		if (musb_channel->transmit && *mode == 1)
+			*len = *len - (*len % packet_sz);
+	}
+
+	return 0;
 }
 
-static void musb_platform_reg_init(struct musb *musb)
+static void bfin_musb_reg_init(struct musb *musb)
 {
 	if (ANOMALY_05000346) {
 		bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
@@ -362,7 +385,7 @@ static void musb_platform_reg_init(struct musb *musb)
 	SSYNC();
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int bfin_musb_init(struct musb *musb)
 {
 
 	/*
@@ -379,32 +402,149 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 	}
 	gpio_direction_output(musb->config->gpio_vrsel, 0);
 
-	usb_nop_xceiv_register();
-	musb->xceiv = otg_get_transceiver();
-	if (!musb->xceiv) {
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		gpio_free(musb->config->gpio_vrsel);
-		return -ENODEV;
+		return -EPROBE_DEFER;
 	}
 
-	musb_platform_reg_init(musb);
+	bfin_musb_reg_init(musb);
 
-	if (is_host_enabled(musb)) {
-		musb->board_set_vbus = bfin_set_vbus;
-		setup_timer(&musb_conn_timer,
-			musb_conn_timer_handler, (unsigned long) musb);
-	}
-	if (is_peripheral_enabled(musb))
-		musb->xceiv->set_power = bfin_set_power;
+	setup_timer(&musb_conn_timer, musb_conn_timer_handler,
+			(unsigned long) musb);
+
+	musb->xceiv->set_power = bfin_musb_set_power;
 
 	musb->isr = blackfin_interrupt;
+	musb->double_buffer_not_ok = true;
+
+	return 0;
+}
+
+static int bfin_musb_exit(struct musb *musb)
+{
+	gpio_free(musb->config->gpio_vrsel);
+	usb_put_phy(musb->xceiv);
+
+	return 0;
+}
+
+static const struct musb_platform_ops bfin_ops = {
+	.init		= bfin_musb_init,
+	.exit		= bfin_musb_exit,
+
+	.enable		= bfin_musb_enable,
+	.disable	= bfin_musb_disable,
+
+	.set_mode	= bfin_musb_set_mode,
+
+	.vbus_status	= bfin_musb_vbus_status,
+	.set_vbus	= bfin_musb_set_vbus,
+
+	.adjust_channel_params = bfin_musb_adjust_channel_params,
+};
+
+static u64 bfin_dmamask = DMA_BIT_MASK(32);
+
+static int bfin_probe(struct platform_device *pdev)
+{
+	struct resource musb_resources[2];
+	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
+	struct platform_device		*musb;
+	struct bfin_glue		*glue;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &bfin_dmamask;
+	musb->dev.coherent_dma_mask	= bfin_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+
+	pdata->platform_ops		= &bfin_ops;
+
+	glue->phy = usb_phy_generic_register();
+	if (IS_ERR(glue->phy))
+		goto err2;
+	platform_set_drvdata(pdev, glue);
+
+	memset(musb_resources, 0x00, sizeof(*musb_resources) *
+			ARRAY_SIZE(musb_resources));
+
+	musb_resources[0].name = pdev->resource[0].name;
+	musb_resources[0].start = pdev->resource[0].start;
+	musb_resources[0].end = pdev->resource[0].end;
+	musb_resources[0].flags = pdev->resource[0].flags;
+
+	musb_resources[1].name = pdev->resource[1].name;
+	musb_resources[1].start = pdev->resource[1].start;
+	musb_resources[1].end = pdev->resource[1].end;
+	musb_resources[1].flags = pdev->resource[1].flags;
+
+	ret = platform_device_add_resources(musb, musb_resources,
+			ARRAY_SIZE(musb_resources));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err3;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err3;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err3;
+	}
+
+	return 0;
+
+err3:
+	usb_phy_generic_unregister(glue->phy);
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int bfin_remove(struct platform_device *pdev)
+{
+	struct bfin_glue		*glue = platform_get_drvdata(pdev);
+
+	platform_device_unregister(glue->musb);
+	usb_phy_generic_unregister(glue->phy);
+	kfree(glue);
 
 	return 0;
 }
 
 #ifdef CONFIG_PM
-void musb_platform_save_context(struct musb *musb,
-			struct musb_context_registers *musb_context)
+static int bfin_suspend(struct device *dev)
 {
+	struct bfin_glue	*glue = dev_get_drvdata(dev);
+	struct musb		*musb = glue_to_musb(glue);
+
 	if (is_host_active(musb))
 		/*
 		 * During hibernate gpio_vrsel will change from high to low
@@ -413,20 +553,33 @@ void musb_platform_save_context(struct musb *musb,
 		 * wakeup event.
 		 */
 		gpio_set_value(musb->config->gpio_vrsel, 0);
-}
 
-void musb_platform_restore_context(struct musb *musb,
-			struct musb_context_registers *musb_context)
-{
-	musb_platform_reg_init(musb);
+	return 0;
 }
-#endif
 
-int musb_platform_exit(struct musb *musb)
+static int bfin_resume(struct device *dev)
 {
-	gpio_free(musb->config->gpio_vrsel);
+	struct bfin_glue	*glue = dev_get_drvdata(dev);
+	struct musb		*musb = glue_to_musb(glue);
+
+	bfin_musb_reg_init(musb);
 
-	otg_put_transceiver(musb->xceiv);
-	usb_nop_xceiv_unregister();
 	return 0;
 }
+#endif
+
+static SIMPLE_DEV_PM_OPS(bfin_pm_ops, bfin_suspend, bfin_resume);
+
+static struct platform_driver bfin_driver = {
+	.probe		= bfin_probe,
+	.remove		= __exit_p(bfin_remove),
+	.driver		= {
+		.name	= "musb-blackfin",
+		.pm	= &bfin_pm_ops,
+	},
+};
+
+MODULE_DESCRIPTION("Blackfin MUSB Glue Layer");
+MODULE_AUTHOR("Bryan Wy <cooloney@kernel.org>");
+MODULE_LICENSE("GPL v2");
+module_platform_driver(bfin_driver);