diff options
Diffstat (limited to 'drivers/usb/musb/Kconfig')
| -rw-r--r-- | drivers/usb/musb/Kconfig | 71 |
1 files changed, 57 insertions, 14 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index ef0c3f9f094..06cc5d6ea68 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -6,13 +6,7 @@ # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller config USB_MUSB_HDRC tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' - depends on USB && USB_GADGET - select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN) - select NOP_USB_XCEIV if (SOC_OMAPTI81XX || SOC_OMAPAM33XX) - select TWL4030_USB if MACH_OMAP_3430SDP - select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA - select USB_OTG_UTILS - select USB_GADGET_DUALSPEED + depends on (USB || USB_GADGET) help Say Y here if your system has a dual role high speed USB controller based on the Mentor Graphics silicon IP. Then @@ -20,7 +14,7 @@ config USB_MUSB_HDRC it's being used with, including the USB peripheral role, or the USB host role, or both. - Texas Instruments familiies using this IP include DaVinci + Texas Instruments families using this IP include DaVinci (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010. Analog Devices parts using this IP include Blackfin BF54x, @@ -34,22 +28,56 @@ config USB_MUSB_HDRC if USB_MUSB_HDRC choice + bool "MUSB Mode Selection" + default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET) + default USB_MUSB_HOST if (USB && !USB_GADGET) + default USB_MUSB_GADGET if (!USB && USB_GADGET) + +config USB_MUSB_HOST + bool "Host only mode" + depends on USB=y || USB=USB_MUSB_HDRC + help + Select this when you want to use MUSB in host mode only, + thereby the gadget feature will be regressed. + +config USB_MUSB_GADGET + bool "Gadget only mode" + depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC + depends on HAS_DMA + help + Select this when you want to use MUSB in gadget mode only, + thereby the host feature will be regressed. + +config USB_MUSB_DUAL_ROLE + bool "Dual Role mode" + depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC)) + depends on HAS_DMA + help + This is the default mode of working of MUSB controller where + both host and gadget features are enabled. + +endchoice + +choice prompt "Platform Glue Layer" config USB_MUSB_DAVINCI tristate "DaVinci" depends on ARCH_DAVINCI_DMx + depends on BROKEN config USB_MUSB_DA8XX tristate "DA8xx/OMAP-L1x" depends on ARCH_DAVINCI_DA8XX + depends on BROKEN config USB_MUSB_TUSB6010 tristate "TUSB6010" config USB_MUSB_OMAP2PLUS tristate "OMAP2430 and onwards" - depends on ARCH_OMAP2PLUS + depends on ARCH_OMAP2PLUS && USB + select GENERIC_PHY config USB_MUSB_AM35X tristate "AM35x" @@ -57,20 +85,30 @@ config USB_MUSB_AM35X config USB_MUSB_DSPS tristate "TI DSPS platforms" - depends on SOC_OMAPTI81XX || SOC_OMAPAM33XX + select USB_MUSB_AM335X_CHILD + depends on OF_IRQ config USB_MUSB_BLACKFIN tristate "Blackfin" depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523) config USB_MUSB_UX500 - tristate "U8500 and U5500" - depends on (ARCH_U8500 && AB8500_USB) + tristate "Ux500 platforms" + +config USB_MUSB_JZ4740 + tristate "JZ4740" + depends on MACH_JZ4740 || COMPILE_TEST + depends on USB_MUSB_GADGET + depends on USB_OTG_BLACKLIST_HUB endchoice +config USB_MUSB_AM335X_CHILD + tristate + choice prompt 'MUSB DMA mode' + default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM || USB_MUSB_JZ4740 default USB_UX500_DMA if USB_MUSB_UX500 default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI @@ -83,7 +121,7 @@ choice allow using DMA on multiplatform kernels. config USB_UX500_DMA - bool 'ST Ericsson U8500 and U5500' + bool 'ST Ericsson Ux500' depends on USB_MUSB_UX500 help Enable DMA transfers on UX500 platforms. @@ -100,9 +138,14 @@ config USB_TI_CPPI_DMA help Enable DMA transfers when TI CPPI DMA is available. +config USB_TI_CPPI41_DMA + bool 'TI CPPI 4.1 (AM335x)' + depends on ARCH_OMAP + select TI_CPPI41 + config USB_TUSB_OMAP_DMA bool 'TUSB 6010' - depends on USB_MUSB_TUSB6010 + depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules depends on ARCH_OMAP help Enable DMA transfers on TUSB 6010 when OMAP DMA is available. |