aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/misc/emi26.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/misc/emi26.c')
-rw-r--r--drivers/usb/misc/emi26.c78
1 files changed, 20 insertions, 58 deletions
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 879a980ca8c..8950fa5e973 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -13,7 +13,6 @@
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/usb.h>
#include <linux/delay.h>
#include <linux/firmware.h>
@@ -37,9 +36,6 @@ static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit);
static int emi26_load_firmware (struct usb_device *dev);
static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id);
static void emi26_disconnect(struct usb_interface *intf);
-static int __init emi26_init (void);
-static void __exit emi26_exit (void);
-
/* thanks to drivers/usb/serial/keyspan_pda.c code */
static int emi26_writememory (struct usb_device *dev, int address,
@@ -81,18 +77,14 @@ static int emi26_load_firmware (struct usb_device *dev)
const struct firmware *bitstream_fw = NULL;
const struct firmware *firmware_fw = NULL;
const struct ihex_binrec *rec;
- int err;
+ int err = -ENOMEM;
int i;
__u32 addr; /* Address to write */
__u8 *buf;
buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL);
- if (!buf) {
- dev_err(&dev->dev, "%s - error loading firmware: error = %d\n",
- __func__, -ENOMEM);
- err = -ENOMEM;
+ if (!buf)
goto wraperr;
- }
err = request_ihex_firmware(&loader_fw, "emi26/loader.fw", &dev->dev);
if (err)
@@ -114,11 +106,8 @@ static int emi26_load_firmware (struct usb_device *dev)
/* Assert reset (stop the CPU in the EMI) */
err = emi26_set_reset(dev,1);
- if (err < 0) {
- dev_err(&dev->dev,"%s - error loading firmware: error = %d\n",
- __func__, err);
+ if (err < 0)
goto wraperr;
- }
rec = (const struct ihex_binrec *)loader_fw->data;
/* 1. We need to put the loader for the FPGA into the EZ-USB */
@@ -126,19 +115,15 @@ static int emi26_load_firmware (struct usb_device *dev)
err = emi26_writememory(dev, be32_to_cpu(rec->addr),
rec->data, be16_to_cpu(rec->len),
ANCHOR_LOAD_INTERNAL);
- if (err < 0) {
- err("%s - error loading firmware: error = %d", __func__, err);
+ if (err < 0)
goto wraperr;
- }
rec = ihex_next_binrec(rec);
}
/* De-assert reset (let the CPU run) */
err = emi26_set_reset(dev,0);
- if (err < 0) {
- err("%s - error loading firmware: error = %d", __func__, err);
+ if (err < 0)
goto wraperr;
- }
msleep(250); /* let device settle */
/* 2. We upload the FPGA firmware into the EMI
@@ -156,18 +141,14 @@ static int emi26_load_firmware (struct usb_device *dev)
rec = ihex_next_binrec(rec);
}
err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
- if (err < 0) {
- err("%s - error loading firmware: error = %d", __func__, err);
+ if (err < 0)
goto wraperr;
- }
} while (rec);
/* Assert reset (stop the CPU in the EMI) */
err = emi26_set_reset(dev,1);
- if (err < 0) {
- err("%s - error loading firmware: error = %d", __func__, err);
+ if (err < 0)
goto wraperr;
- }
/* 3. We need to put the loader for the firmware into the EZ-USB (again...) */
for (rec = (const struct ihex_binrec *)loader_fw->data;
@@ -175,19 +156,15 @@ static int emi26_load_firmware (struct usb_device *dev)
err = emi26_writememory(dev, be32_to_cpu(rec->addr),
rec->data, be16_to_cpu(rec->len),
ANCHOR_LOAD_INTERNAL);
- if (err < 0) {
- err("%s - error loading firmware: error = %d", __func__, err);
+ if (err < 0)
goto wraperr;
- }
}
msleep(250); /* let device settle */
/* De-assert reset (let the CPU run) */
err = emi26_set_reset(dev,0);
- if (err < 0) {
- err("%s - error loading firmware: error = %d", __func__, err);
+ if (err < 0)
goto wraperr;
- }
/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
@@ -197,19 +174,15 @@ static int emi26_load_firmware (struct usb_device *dev)
err = emi26_writememory(dev, be32_to_cpu(rec->addr),
rec->data, be16_to_cpu(rec->len),
ANCHOR_LOAD_EXTERNAL);
- if (err < 0) {
- err("%s - error loading firmware: error = %d", __func__, err);
+ if (err < 0)
goto wraperr;
- }
}
}
-
+
/* Assert reset (stop the CPU in the EMI) */
err = emi26_set_reset(dev,1);
- if (err < 0) {
- err("%s - error loading firmware: error = %d", __func__, err);
+ if (err < 0)
goto wraperr;
- }
for (rec = (const struct ihex_binrec *)firmware_fw->data;
rec; rec = ihex_next_binrec(rec)) {
@@ -217,19 +190,15 @@ static int emi26_load_firmware (struct usb_device *dev)
err = emi26_writememory(dev, be32_to_cpu(rec->addr),
rec->data, be16_to_cpu(rec->len),
ANCHOR_LOAD_INTERNAL);
- if (err < 0) {
- err("%s - error loading firmware: error = %d", __func__, err);
+ if (err < 0)
goto wraperr;
- }
}
}
/* De-assert reset (let the CPU run) */
err = emi26_set_reset(dev,0);
- if (err < 0) {
- err("%s - error loading firmware: error = %d", __func__, err);
+ if (err < 0)
goto wraperr;
- }
msleep(250); /* let device settle */
/* return 1 to fail the driver inialization
@@ -237,6 +206,10 @@ static int emi26_load_firmware (struct usb_device *dev)
err = 1;
wraperr:
+ if (err < 0)
+ dev_err(&dev->dev,"%s - error loading firmware: error = %d\n",
+ __func__, err);
+
release_firmware(loader_fw);
release_firmware(bitstream_fw);
release_firmware(firmware_fw);
@@ -245,7 +218,7 @@ wraperr:
return err;
}
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
{ USB_DEVICE(EMI26_VENDOR_ID, EMI26_PRODUCT_ID) },
{ USB_DEVICE(EMI26_VENDOR_ID, EMI26B_PRODUCT_ID) },
{ } /* Terminating entry */
@@ -276,18 +249,7 @@ static struct usb_driver emi26_driver = {
.id_table = id_table,
};
-static int __init emi26_init (void)
-{
- return usb_register(&emi26_driver);
-}
-
-static void __exit emi26_exit (void)
-{
- usb_deregister (&emi26_driver);
-}
-
-module_init(emi26_init);
-module_exit(emi26_exit);
+module_usb_driver(emi26_driver);
MODULE_AUTHOR("Tapio Laxström");
MODULE_DESCRIPTION("Emagic EMI 2|6 firmware loader.");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 11:48:08 +0000