diff options
Diffstat (limited to 'drivers/usb/misc/Kconfig')
| -rw-r--r-- | drivers/usb/misc/Kconfig | 172 |
1 files changed, 130 insertions, 42 deletions
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 6649531fa82..1bca274dc3b 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -2,11 +2,9 @@ # USB Miscellaneous driver configuration # comment "USB Miscellaneous drivers" - depends on USB config USB_EMI62 tristate "EMI 6|2m USB Audio interface support" - depends on USB ---help--- This driver loads firmware to Emagic EMI 6|2m low latency USB Audio and Midi interface. @@ -21,7 +19,6 @@ config USB_EMI62 config USB_EMI26 tristate "EMI 2|6 USB Audio interface support" - depends on USB ---help--- This driver loads firmware to Emagic EMI 2|6 low latency USB Audio interface. @@ -32,19 +29,25 @@ config USB_EMI26 To compile this driver as a module, choose M here: the module will be called emi26. -config USB_AUERSWALD - tristate "USB Auerswald ISDN support (EXPERIMENTAL)" - depends on USB && EXPERIMENTAL +config USB_ADUTUX + tristate "ADU devices from Ontrak Control Systems" help - Say Y here if you want to connect an Auerswald USB ISDN Device - to your computer's USB port. + Say Y if you want to use an ADU device from Ontrak Control + Systems. + + To compile this driver as a module, choose M here. The module + will be called adutux. + +config USB_SEVSEG + tristate "USB 7-Segment LED Display" + help + Say Y here if you have a USB 7-Segment Display by Delcom To compile this driver as a module, choose M here: the - module will be called auerswald. + module will be called usbsevseg. config USB_RIO500 - tristate "USB Diamond Rio500 support (EXPERIMENTAL)" - depends on USB && EXPERIMENTAL + tristate "USB Diamond Rio500 support" help Say Y here if you want to connect a USB Rio500 mp3 player to your computer's USB port. Please read <file:Documentation/usb/rio.txt> @@ -54,8 +57,7 @@ config USB_RIO500 module will be called rio500. config USB_LEGOTOWER - tristate "USB Lego Infrared Tower support (EXPERIMENTAL)" - depends on USB && EXPERIMENTAL + tristate "USB Lego Infrared Tower support" help Say Y here if you want to connect a USB Lego Infrared Tower to your computer's USB port. @@ -68,7 +70,6 @@ config USB_LEGOTOWER config USB_LCD tristate "USB LCD driver support" - depends on USB help Say Y here if you want to connect an USBLCD to your computer's USB port. The USBLCD is a small USB interface board for @@ -80,7 +81,6 @@ config USB_LCD config USB_LED tristate "USB LED driver support" - depends on USB help Say Y here if you want to connect an USBLED device to your computer's USB port. @@ -88,9 +88,21 @@ config USB_LED To compile this driver as a module, choose M here: the module will be called usbled. +config USB_CYPRESS_CY7C63 + tristate "Cypress CY7C63xxx USB driver support" + help + Say Y here if you want to connect a Cypress CY7C63xxx + micro controller to your computer's USB port. Currently this + driver supports the pre-programmed devices (incl. firmware) + by AK Modul-Bus Computer GmbH. + + Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html + + To compile this driver as a module, choose M here: the + module will be called cypress_cy7c63. + config USB_CYTHERM tristate "Cypress USB thermometer driver support" - depends on USB help Say Y here if you want to connect a Cypress USB thermometer device to your computer's USB port. This device is also known @@ -101,31 +113,8 @@ config USB_CYTHERM To compile this driver as a module, choose M here: the module will be called cytherm. -config USB_PHIDGETKIT - tristate "USB PhidgetKit support" - depends on USB - help - Say Y here if you want to connect a PhidgetKit USB device from - Phidgets Inc. - - To compile this driver as a module, choose M here: the - module will be called phidgetkit. - -config USB_PHIDGETSERVO - tristate "USB PhidgetServo support" - depends on USB - help - Say Y here if you want to connect an 1 or 4 Motor PhidgetServo - servo controller version 2.0 or 3.0. - - Phidgets Inc. has a web page at <http://www.phidgets.com/>. - - To compile this driver as a module, choose M here: the - module will be called phidgetservo. - config USB_IDMOUSE tristate "Siemens ID USB Mouse Fingerprint sensor support" - depends on USB help Say Y here if you want to use the fingerprint sensor on the Siemens ID Mouse. There is also a Siemens ID Mouse @@ -137,11 +126,40 @@ config USB_IDMOUSE See also <http://www.fs.tum.de/~echtler/idmouse/>. +config USB_FTDI_ELAN + tristate "Elan PCMCIA CardBus Adapter USB Client" + help + ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. + Currently only the U132 adapter is available. + + The U132 is specifically designed for CardBus PC cards that contain + an OHCI host controller. Typical PC cards are the Orange Mobile 3G + Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work + with PC cards that do not contain an OHCI controller. To use a U132 + adapter you will need this "ftdi-elan" module as well as the "u132-hcd" + module which is a USB host controller driver that talks to the OHCI + controller within CardBus card that are inserted in the U132 adapter. + + This driver has been tested with a CardBus OHCI USB adapter, and + worked with a USB PEN Drive inserted into the first USB port of + the PCCARD. A rather pointless thing to do, but useful for testing. + + See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller" + + It is safe to say M here. + +config USB_APPLEDISPLAY + tristate "Apple Cinema Display support" + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to control the backlight of Apple Cinema + Displays over USB. This driver provides a sysfs interface. + source "drivers/usb/misc/sisusbvga/Kconfig" config USB_LD tristate "USB LD driver" - depends on USB && EXPERIMENTAL help This driver is for generic USB devices that use interrupt transfers, like LD Didactic's USB devices. @@ -149,9 +167,30 @@ config USB_LD To compile this driver as a module, choose M here: the module will be called ldusb. +config USB_TRANCEVIBRATOR + tristate "PlayStation 2 Trance Vibrator driver support" + help + Say Y here if you want to connect a PlayStation 2 Trance Vibrator + device to your computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called trancevibrator. + +config USB_IOWARRIOR + tristate "IO Warrior driver support" + help + Say Y here if you want to support the IO Warrior devices from Code + Mercenaries. This includes support for the following devices: + IO Warrior 40 + IO Warrior 24 + IO Warrior 56 + IO Warrior 24 Power Vampire + + To compile this driver as a module, choose M here: the + module will be called iowarrior. + config USB_TEST - tristate "USB testing driver (DEVELOPMENT)" - depends on USB && USB_DEVICEFS && EXPERIMENTAL + tristate "USB testing driver" help This driver is for testing host controller software. It is used with specialized device firmware for regression and stress testing, @@ -160,3 +199,52 @@ config USB_TEST See <http://www.linux-usb.org/usbtest/> for more information, including sample test device firmware and "how to use it". +config USB_EHSET_TEST_FIXTURE + tristate "USB EHSET Test Fixture driver" + help + Say Y here if you want to support the special test fixture device + used for the USB-IF Embedded Host High-Speed Electrical Test procedure. + + When the test fixture is connected, it can enumerate as one of several + VID/PID pairs. This driver then initiates a corresponding test mode on + the downstream port to which the test fixture is attached. + + See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more + information. + +config USB_ISIGHTFW + tristate "iSight firmware loading support" + select FW_LOADER + help + This driver loads firmware for USB Apple iSight cameras, allowing + them to be driven by the USB video class driver available at + http://linux-uvc.berlios.de + + The firmware for this driver must be extracted from the MacOS + driver beforehand. Tools for doing so are available at + http://bersace03.free.fr + +config USB_YUREX + tristate "USB YUREX driver support" + help + Say Y here if you want to connect a YUREX to your computer's + USB port. The YUREX is a leg-shakes sensor. See + <http://bbu.kayac.com/en/> for further information. + This driver supports read/write of leg-shakes counter and + fasync for the counter update via a device file /dev/yurex*. + + To compile this driver as a module, choose M here: the + module will be called yurex. + +config USB_EZUSB_FX2 + tristate "Functions for loading firmware on EZUSB chips" + help + Say Y here if you need EZUSB device support. + (Cypress FX/FX2/FX2LP microcontrollers) + +config USB_HSIC_USB3503 + tristate "USB3503 HSIC to USB20 Driver" + depends on I2C + select REGMAP_I2C + help + This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. |