diff options
Diffstat (limited to 'drivers/usb/host')
43 files changed, 3921 insertions, 1123 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a9707da7da0..03314f861be 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -29,6 +29,14 @@ if USB_XHCI_HCD config USB_XHCI_PLATFORM tristate +config USB_XHCI_MVEBU + tristate "xHCI support for Marvell Armada 375/38x" + select USB_XHCI_PLATFORM + depends on ARCH_MVEBU || COMPILE_TEST + ---help--- + Say 'Y' to enable the support for the xHCI host controller + found in Marvell Armada 375/38x ARM SOCs. + endif # USB_XHCI_HCD config USB_EHCI_HCD @@ -168,9 +176,8 @@ config USB_EHCI_HCD_AT91 config USB_EHCI_MSM tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller" - depends on ARCH_MSM + depends on ARCH_MSM || ARCH_QCOM select USB_EHCI_ROOT_HUB_TT - select USB_MSM_OTG ---help--- Enables support for the USB Host controller present on the Qualcomm chipsets. Root Hub has inbuilt TT. @@ -314,7 +321,6 @@ config USB_ISP1760_HCD config USB_ISP1362_HCD tristate "ISP1362 HCD support" - default N ---help--- Supports the Philips ISP1362 chip as a host controller @@ -326,7 +332,6 @@ config USB_ISP1362_HCD config USB_FUSBH200_HCD tristate "FUSBH200 HCD support" depends on USB - default N ---help--- Faraday FUSBH200 is designed to meet USB2.0 EHCI specification with minor modification. @@ -337,7 +342,6 @@ config USB_FUSBH200_HCD config USB_FOTG210_HCD tristate "FOTG210 HCD support" depends on USB - default N ---help--- Faraday FOTG210 is an OTG controller which can be configured as an USB2.0 host. It is designed to meet USB2.0 EHCI specification @@ -346,10 +350,19 @@ config USB_FOTG210_HCD To compile this driver as a module, choose M here: the module will be called fotg210-hcd. +config USB_MAX3421_HCD + tristate "MAX3421 HCD (USB-over-SPI) support" + depends on USB && SPI + ---help--- + The Maxim MAX3421E chip supports standard USB 2.0-compliant + full-speed devices either in host or peripheral mode. This + driver supports the host-mode of the MAX3421E only. + + To compile this driver as a module, choose M here: the module will + be called max3421-hcd. + config USB_OHCI_HCD tristate "OHCI HCD (USB 1.1) support" - select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 - depends on USB_ISP1301 || !ARCH_LPC32XX ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's @@ -368,6 +381,7 @@ if USB_OHCI_HCD config USB_OHCI_HCD_OMAP1 tristate "OHCI support for OMAP1/2 chips" depends on ARCH_OMAP1 + depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) default y ---help--- Enables support for the OHCI controller on OMAP1/2 chips. @@ -391,6 +405,7 @@ config USB_OHCI_HCD_S3C2410 config USB_OHCI_HCD_LPC32XX tristate "Support for LPC on-chip OHCI USB controller" depends on USB_OHCI_HCD && ARCH_LPC32XX + depends on USB_ISP1301 default y ---help--- Enables support for the on-chip OHCI controller on @@ -420,6 +435,16 @@ config USB_OHCI_HCD_OMAP3 Enables support for the on-chip OHCI controller on OMAP3 and later chips. +config USB_OHCI_HCD_DAVINCI + bool "OHCI support for TI DaVinci DA8xx" + depends on ARCH_DAVINCI_DA8XX + depends on USB_OHCI_HCD=y + default y + help + Enables support for the DaVinci DA8xx integrated OHCI + controller. This driver cannot currently be a loadable + module because it lacks a proper PHY abstraction. + config USB_OHCI_ATH79 bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)" depends on (SOC_AR71XX || SOC_AR724X) @@ -584,7 +609,6 @@ config FHCI_DEBUG config USB_U132_HCD tristate "Elan U132 Adapter Host Controller" depends on USB_FTDI_ELAN - default M help The U132 adapter is a USB to CardBus adapter specifically designed for PC cards that contain an OHCI host controller. Typical PC cards diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 7530468c9a4..af89a903d97 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -19,6 +19,9 @@ xhci-hcd-$(CONFIG_PCI) += xhci-pci.o ifneq ($(CONFIG_USB_XHCI_PLATFORM), ) xhci-hcd-y += xhci-plat.o +ifneq ($(CONFIG_USB_XHCI_MVEBU), ) + xhci-hcd-y += xhci-mvebu.o +endif endif obj-$(CONFIG_USB_WHCI_HCD) += whci/ @@ -70,3 +73,4 @@ obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o obj-$(CONFIG_USB_FUSBH200_HCD) += fusbh200-hcd.o obj-$(CONFIG_USB_FOTG210_HCD) += fotg210-hcd.o +obj-$(CONFIG_USB_MAX3421_HCD) += max3421-hcd.o diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index d1d8c47777c..d1c76216350 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_gpio.h> +#include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/usb/phy.h> #include <linux/usb/samsung_usb_phy.h> @@ -42,17 +43,106 @@ static const char hcd_name[] = "ehci-exynos"; static struct hc_driver __read_mostly exynos_ehci_hc_driver; +#define PHY_NUMBER 3 + struct exynos_ehci_hcd { struct clk *clk; struct usb_phy *phy; struct usb_otg *otg; + struct phy *phy_g[PHY_NUMBER]; }; #define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv) -static void exynos_setup_vbus_gpio(struct platform_device *pdev) +static int exynos_ehci_get_phy(struct device *dev, + struct exynos_ehci_hcd *exynos_ehci) +{ + struct device_node *child; + struct phy *phy; + int phy_number; + int ret = 0; + + exynos_ehci->phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (IS_ERR(exynos_ehci->phy)) { + ret = PTR_ERR(exynos_ehci->phy); + if (ret != -ENXIO && ret != -ENODEV) { + dev_err(dev, "no usb2 phy configured\n"); + return ret; + } + dev_dbg(dev, "Failed to get usb2 phy\n"); + } else { + exynos_ehci->otg = exynos_ehci->phy->otg; + } + + for_each_available_child_of_node(dev->of_node, child) { + ret = of_property_read_u32(child, "reg", &phy_number); + if (ret) { + dev_err(dev, "Failed to parse device tree\n"); + of_node_put(child); + return ret; + } + + if (phy_number >= PHY_NUMBER) { + dev_err(dev, "Invalid number of PHYs\n"); + of_node_put(child); + return -EINVAL; + } + + phy = devm_of_phy_get(dev, child, 0); + of_node_put(child); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + if (ret != -ENOSYS && ret != -ENODEV) { + dev_err(dev, "no usb2 phy configured\n"); + return ret; + } + dev_dbg(dev, "Failed to get usb2 phy\n"); + } + exynos_ehci->phy_g[phy_number] = phy; + } + + return ret; +} + +static int exynos_ehci_phy_enable(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); + int i; + int ret = 0; + + if (!IS_ERR(exynos_ehci->phy)) + return usb_phy_init(exynos_ehci->phy); + + for (i = 0; ret == 0 && i < PHY_NUMBER; i++) + if (!IS_ERR(exynos_ehci->phy_g[i])) + ret = phy_power_on(exynos_ehci->phy_g[i]); + if (ret) + for (i--; i >= 0; i--) + if (!IS_ERR(exynos_ehci->phy_g[i])) + phy_power_off(exynos_ehci->phy_g[i]); + + return ret; +} + +static void exynos_ehci_phy_disable(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); + int i; + + if (!IS_ERR(exynos_ehci->phy)) { + usb_phy_shutdown(exynos_ehci->phy); + return; + } + + for (i = 0; i < PHY_NUMBER; i++) + if (!IS_ERR(exynos_ehci->phy_g[i])) + phy_power_off(exynos_ehci->phy_g[i]); +} + +static void exynos_setup_vbus_gpio(struct device *dev) { - struct device *dev = &pdev->dev; int err; int gpio; @@ -75,7 +165,6 @@ static int exynos_ehci_probe(struct platform_device *pdev) struct usb_hcd *hcd; struct ehci_hcd *ehci; struct resource *res; - struct usb_phy *phy; int irq; int err; @@ -88,7 +177,7 @@ static int exynos_ehci_probe(struct platform_device *pdev) if (err) return err; - exynos_setup_vbus_gpio(pdev); + exynos_setup_vbus_gpio(&pdev->dev); hcd = usb_create_hcd(&exynos_ehci_hc_driver, &pdev->dev, dev_name(&pdev->dev)); @@ -102,15 +191,9 @@ static int exynos_ehci_probe(struct platform_device *pdev) "samsung,exynos5440-ehci")) goto skip_phy; - phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (IS_ERR(phy)) { - usb_put_hcd(hcd); - dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); - return -EPROBE_DEFER; - } else { - exynos_ehci->phy = phy; - exynos_ehci->otg = phy->otg; - } + err = exynos_ehci_get_phy(&pdev->dev, exynos_ehci); + if (err) + goto fail_clk; skip_phy: @@ -135,10 +218,9 @@ skip_phy: hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&pdev->dev, "Failed to remap I/O memory\n"); - err = -ENOMEM; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + err = PTR_ERR(hcd->regs); goto fail_io; } @@ -152,8 +234,11 @@ skip_phy: if (exynos_ehci->otg) exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self); - if (exynos_ehci->phy) - usb_phy_init(exynos_ehci->phy); + err = exynos_ehci_phy_enable(&pdev->dev); + if (err) { + dev_err(&pdev->dev, "Failed to enable USB phy\n"); + goto fail_io; + } ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs; @@ -173,8 +258,7 @@ skip_phy: return 0; fail_add_hcd: - if (exynos_ehci->phy) - usb_phy_shutdown(exynos_ehci->phy); + exynos_ehci_phy_disable(&pdev->dev); fail_io: clk_disable_unprepare(exynos_ehci->clk); fail_clk: @@ -192,8 +276,7 @@ static int exynos_ehci_remove(struct platform_device *pdev) if (exynos_ehci->otg) exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self); - if (exynos_ehci->phy) - usb_phy_shutdown(exynos_ehci->phy); + exynos_ehci_phy_disable(&pdev->dev); clk_disable_unprepare(exynos_ehci->clk); @@ -212,12 +295,13 @@ static int exynos_ehci_suspend(struct device *dev) int rc; rc = ehci_suspend(hcd, do_wakeup); + if (rc) + return rc; if (exynos_ehci->otg) exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self); - if (exynos_ehci->phy) - usb_phy_shutdown(exynos_ehci->phy); + exynos_ehci_phy_disable(dev); clk_disable_unprepare(exynos_ehci->clk); @@ -228,14 +312,19 @@ static int exynos_ehci_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); + int ret; clk_prepare_enable(exynos_ehci->clk); if (exynos_ehci->otg) exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self); - if (exynos_ehci->phy) - usb_phy_init(exynos_ehci->phy); + ret = exynos_ehci_phy_enable(dev); + if (ret) { + dev_err(dev, "Failed to enable USB phy\n"); + clk_disable_unprepare(exynos_ehci->clk); + return ret; + } /* DMA burst Enable */ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 6f2c8d3899d..cf2734b532a 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -248,7 +248,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, break; } - if (pdata->have_sysif_regs && pdata->controller_ver && + if (pdata->have_sysif_regs && + pdata->controller_ver > FSL_USB_VER_1_6 && (phy_mode == FSL_USB2_PHY_ULPI)) { /* check PHY_CLK_VALID to get phy clk valid */ if (!(spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 471142725ff..81cda09b47e 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -685,8 +685,15 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 status, masked_status, pcd_status = 0, cmd; int bh; + unsigned long flags; - spin_lock (&ehci->lock); + /* + * For threadirqs option we use spin_lock_irqsave() variant to prevent + * deadlock with ehci hrtimer callback, because hrtimer callbacks run + * in interrupt context even when threadirqs is specified. We can go + * back to spin_lock() variant when hrtimer callbacks become threaded. + */ + spin_lock_irqsave(&ehci->lock, flags); status = ehci_readl(ehci, &ehci->regs->status); @@ -704,7 +711,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* Shared IRQ? */ if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { - spin_unlock(&ehci->lock); + spin_unlock_irqrestore(&ehci->lock, flags); return IRQ_NONE; } @@ -815,7 +822,7 @@ dead: if (bh) ehci_work (ehci); - spin_unlock (&ehci->lock); + spin_unlock_irqrestore(&ehci->lock, flags); if (pcd_status) usb_hcd_poll_rh_status(hcd); return IRQ_HANDLED; diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 47b858fc50b..cc305c71ac3 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -33,15 +33,6 @@ #ifdef CONFIG_PM -static int ehci_hub_control( - struct usb_hcd *hcd, - u16 typeReq, - u16 wValue, - u16 wIndex, - char *buf, - u16 wLength -); - static int persist_enabled_on_companion(struct usb_device *udev, void *unused) { return !udev->maxchild && udev->persist_enabled && @@ -238,6 +229,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) int port; int mask; int changed; + bool fs_idle_delay; ehci_dbg(ehci, "suspend root hub\n"); @@ -272,6 +264,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) ehci->bus_suspended = 0; ehci->owned_ports = 0; changed = 0; + fs_idle_delay = false; port = HCS_N_PORTS(ehci->hcs_params); while (port--) { u32 __iomem *reg = &ehci->regs->port_status [port]; @@ -300,16 +293,32 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) } if (t1 != t2) { + /* + * On some controllers, Wake-On-Disconnect will + * generate false wakeup signals until the bus + * switches over to full-speed idle. For their + * sake, add a delay if we need one. + */ + if ((t2 & PORT_WKDISC_E) && + ehci_port_speed(ehci, t2) == + USB_PORT_STAT_HIGH_SPEED) + fs_idle_delay = true; ehci_writel(ehci, t2, reg); changed = 1; } } + spin_unlock_irq(&ehci->lock); + + if ((changed && ehci->has_tdi_phy_lpm) || fs_idle_delay) { + /* + * Wait for HCD to enter low-power mode or for the bus + * to switch to full-speed idle. + */ + usleep_range(5000, 5500); + } if (changed && ehci->has_tdi_phy_lpm) { - spin_unlock_irq(&ehci->lock); - msleep(5); /* 5 ms for HCD to enter low-power mode */ spin_lock_irq(&ehci->lock); - port = HCS_N_PORTS(ehci->hcs_params); while (port--) { u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port]; @@ -322,8 +331,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) port, (t3 & HOSTPC_PHCD) ? "succeeded" : "failed"); } + spin_unlock_irq(&ehci->lock); } - spin_unlock_irq(&ehci->lock); /* Apparently some devices need a >= 1-uframe delay here */ if (ehci->bus_suspended) @@ -847,7 +856,7 @@ cleanup: #endif /* CONFIG_USB_HCD_TEST_MODE */ /*-------------------------------------------------------------------------*/ -static int ehci_hub_control ( +int ehci_hub_control( struct usb_hcd *hcd, u16 typeReq, u16 wValue, @@ -1267,6 +1276,7 @@ error_exit: spin_unlock_irqrestore (&ehci->lock, flags); return retval; } +EXPORT_SYMBOL_GPL(ehci_hub_control); static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum) { diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index f341651d6f6..982c09bebe0 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -96,10 +96,9 @@ static int ehci_msm_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&pdev->dev, "ioremap failed\n"); - ret = -ENOMEM; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + ret = PTR_ERR(hcd->regs); goto put_hcd; } diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index bd61612a725..08147c35f83 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -176,11 +176,9 @@ static int mv_ehci_probe(struct platform_device *pdev) goto err_put_hcd; } - ehci_mv->phy_regs = devm_ioremap(&pdev->dev, r->start, - resource_size(r)); - if (!ehci_mv->phy_regs) { - dev_err(&pdev->dev, "failed to map phy I/O memory\n"); - retval = -EFAULT; + ehci_mv->phy_regs = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(ehci_mv->phy_regs)) { + retval = PTR_ERR(ehci_mv->phy_regs); goto err_put_hcd; } @@ -191,11 +189,9 @@ static int mv_ehci_probe(struct platform_device *pdev) goto err_put_hcd; } - ehci_mv->cap_regs = devm_ioremap(&pdev->dev, r->start, - resource_size(r)); - if (ehci_mv->cap_regs == NULL) { - dev_err(&pdev->dev, "failed to map I/O memory\n"); - retval = -EFAULT; + ehci_mv->cap_regs = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(ehci_mv->cap_regs)) { + retval = PTR_ERR(ehci_mv->cap_regs); goto err_put_hcd; } diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 30d35e5e503..22e15cab8ea 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -15,6 +15,7 @@ #include <linux/clk.h> #include <linux/platform_data/usb-ehci-orion.h> #include <linux/of.h> +#include <linux/phy/phy.h> #include <linux/of_device.h> #include <linux/of_irq.h> #include <linux/usb.h> @@ -42,6 +43,13 @@ #define DRIVER_DESC "EHCI orion driver" +#define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv) + +struct orion_ehci_hcd { + struct clk *clk; + struct phy *phy; +}; + static const char hcd_name[] = "ehci-orion"; static struct hc_driver __read_mostly ehci_orion_hc_driver; @@ -137,6 +145,10 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, } } +static const struct ehci_driver_overrides orion_overrides __initconst = { + .extra_priv_size = sizeof(struct orion_ehci_hcd), +}; + static int ehci_orion_drv_probe(struct platform_device *pdev) { struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev); @@ -144,26 +156,23 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) struct resource *res; struct usb_hcd *hcd; struct ehci_hcd *ehci; - struct clk *clk; void __iomem *regs; int irq, err; enum orion_ehci_phy_ver phy_version; + struct orion_ehci_hcd *priv; if (usb_disabled()) return -ENODEV; pr_debug("Initializing Orion-SoC USB Host Controller\n"); - if (pdev->dev.of_node) - irq = irq_of_parse_and_map(pdev->dev.of_node, 0); - else - irq = platform_get_irq(pdev, 0); + irq = platform_get_irq(pdev, 0); if (irq <= 0) { dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n", dev_name(&pdev->dev)); err = -ENODEV; - goto err1; + goto err; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -172,7 +181,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) "Found HC with no register addr. Check %s setup!\n", dev_name(&pdev->dev)); err = -ENODEV; - goto err1; + goto err; } /* @@ -182,25 +191,19 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) */ err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); if (err) - goto err1; + goto err; regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(regs)) { err = PTR_ERR(regs); - goto err1; + goto err; } - /* Not all platforms can gate the clock, so it is not - an error if the clock does not exists. */ - clk = devm_clk_get(&pdev->dev, NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); - hcd = usb_create_hcd(&ehci_orion_hc_driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { err = -ENOMEM; - goto err2; + goto err; } hcd->rsrc_start = res->start; @@ -211,6 +214,29 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) ehci->caps = hcd->regs + 0x100; hcd->has_tt = 1; + priv = hcd_to_orion_priv(hcd); + /* + * Not all platforms can gate the clock, so it is not an error if + * the clock does not exists. + */ + priv->clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(priv->clk)) + clk_prepare_enable(priv->clk); + + priv->phy = devm_phy_optional_get(&pdev->dev, "usb"); + if (IS_ERR(priv->phy)) { + err = PTR_ERR(priv->phy); + goto err_phy_get; + } else { + err = phy_init(priv->phy); + if (err) + goto err_phy_init; + + err = phy_power_on(priv->phy); + if (err) + goto err_phy_power_on; + } + /* * (Re-)program MBUS remapping windows if we are asked to. */ @@ -240,17 +266,23 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) - goto err3; + goto err_add_hcd; device_wakeup_enable(hcd->self.controller); return 0; -err3: +err_add_hcd: + if (!IS_ERR(priv->phy)) + phy_power_off(priv->phy); +err_phy_power_on: + if (!IS_ERR(priv->phy)) + phy_exit(priv->phy); +err_phy_init: +err_phy_get: + if (!IS_ERR(priv->clk)) + clk_disable_unprepare(priv->clk); usb_put_hcd(hcd); -err2: - if (!IS_ERR(clk)) - clk_disable_unprepare(clk); -err1: +err: dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), err); @@ -260,14 +292,20 @@ err1: static int ehci_orion_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct clk *clk; + struct orion_ehci_hcd *priv = hcd_to_orion_priv(hcd); usb_remove_hcd(hcd); + + if (!IS_ERR(priv->phy)) { + phy_power_off(priv->phy); + phy_exit(priv->phy); + } + + if (!IS_ERR(priv->clk)) + clk_disable_unprepare(priv->clk); + usb_put_hcd(hcd); - clk = devm_clk_get(&pdev->dev, NULL); - if (!IS_ERR(clk)) - clk_disable_unprepare(clk); return 0; } @@ -295,7 +333,7 @@ static int __init ehci_orion_init(void) pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_orion_hc_driver, NULL); + ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides); return platform_driver_register(&ehci_orion_driver); } module_init(ehci_orion_init); diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 01536cfd361..2f5b9ce3e04 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -3,6 +3,7 @@ * * Copyright 2007 Steven Brown <sbrown@cortland.com> * Copyright 2010-2012 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> * * Derived from the ohci-ssb driver * Copyright 2007 Michael Buesch <m@bues.ch> @@ -18,6 +19,7 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +#include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/kernel.h> @@ -25,7 +27,9 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/reset.h> #include <linux/usb.h> #include <linux/usb/hcd.h> #include <linux/usb/ehci_pdriver.h> @@ -33,6 +37,14 @@ #include "ehci.h" #define DRIVER_DESC "EHCI generic platform driver" +#define EHCI_MAX_CLKS 3 +#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv) + +struct ehci_platform_priv { + struct clk *clks[EHCI_MAX_CLKS]; + struct reset_control *rst; + struct phy *phy; +}; static const char hcd_name[] = "ehci-platform"; @@ -45,8 +57,6 @@ static int ehci_platform_reset(struct usb_hcd *hcd) hcd->has_tt = pdata->has_tt; ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug; - ehci->big_endian_desc = pdata->big_endian_desc; - ehci->big_endian_mmio = pdata->big_endian_mmio; if (pdata->pre_setup) { retval = pdata->pre_setup(hcd); @@ -64,38 +74,91 @@ static int ehci_platform_reset(struct usb_hcd *hcd) return 0; } +static int ehci_platform_power_on(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); + int clk, ret; + + for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) { + ret = clk_prepare_enable(priv->clks[clk]); + if (ret) + goto err_disable_clks; + } + + if (priv->phy) { + ret = phy_init(priv->phy); + if (ret) + goto err_disable_clks; + + ret = phy_power_on(priv->phy); + if (ret) + goto err_exit_phy; + } + + return 0; + +err_exit_phy: + phy_exit(priv->phy); +err_disable_clks: + while (--clk >= 0) + clk_disable_unprepare(priv->clks[clk]); + + return ret; +} + +static void ehci_platform_power_off(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); + int clk; + + if (priv->phy) { + phy_power_off(priv->phy); + phy_exit(priv->phy); + } + + for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--) + if (priv->clks[clk]) + clk_disable_unprepare(priv->clks[clk]); +} + static struct hc_driver __read_mostly ehci_platform_hc_driver; static const struct ehci_driver_overrides platform_overrides __initconst = { - .reset = ehci_platform_reset, + .reset = ehci_platform_reset, + .extra_priv_size = sizeof(struct ehci_platform_priv), }; -static struct usb_ehci_pdata ehci_platform_defaults; +static struct usb_ehci_pdata ehci_platform_defaults = { + .power_on = ehci_platform_power_on, + .power_suspend = ehci_platform_power_off, + .power_off = ehci_platform_power_off, +}; static int ehci_platform_probe(struct platform_device *dev) { struct usb_hcd *hcd; struct resource *res_mem; - struct usb_ehci_pdata *pdata; - int irq; - int err; + struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); + struct ehci_platform_priv *priv; + struct ehci_hcd *ehci; + int err, irq, clk = 0; if (usb_disabled()) return -ENODEV; /* - * use reasonable defaults so platforms don't have to provide these. - * with DT probing on ARM, none of these are set. + * Use reasonable defaults so platforms don't have to provide these + * with DT probing on ARM. */ - if (!dev_get_platdata(&dev->dev)) - dev->dev.platform_data = &ehci_platform_defaults; + if (!pdata) + pdata = &ehci_platform_defaults; err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); if (err) return err; - pdata = dev_get_platdata(&dev->dev); - irq = platform_get_irq(dev, 0); if (irq < 0) { dev_err(&dev->dev, "no irq provided"); @@ -107,17 +170,84 @@ static int ehci_platform_probe(struct platform_device *dev) return -ENXIO; } + hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, + dev_name(&dev->dev)); + if (!hcd) + return -ENOMEM; + + platform_set_drvdata(dev, hcd); + dev->dev.platform_data = pdata; + priv = hcd_to_ehci_priv(hcd); + ehci = hcd_to_ehci(hcd); + + if (pdata == &ehci_platform_defaults && dev->dev.of_node) { + if (of_property_read_bool(dev->dev.of_node, "big-endian-regs")) + ehci->big_endian_mmio = 1; + + if (of_property_read_bool(dev->dev.of_node, "big-endian-desc")) + ehci->big_endian_desc = 1; + + if (of_property_read_bool(dev->dev.of_node, "big-endian")) + ehci->big_endian_mmio = ehci->big_endian_desc = 1; + + priv->phy = devm_phy_get(&dev->dev, "usb"); + if (IS_ERR(priv->phy)) { + err = PTR_ERR(priv->phy); + if (err == -EPROBE_DEFER) + goto err_put_hcd; + priv->phy = NULL; + } + + for (clk = 0; clk < EHCI_MAX_CLKS; clk++) { + priv->clks[clk] = of_clk_get(dev->dev.of_node, clk); + if (IS_ERR(priv->clks[clk])) { + err = PTR_ERR(priv->clks[clk]); + if (err == -EPROBE_DEFER) + goto err_put_clks; + priv->clks[clk] = NULL; + break; + } + } + } + + priv->rst = devm_reset_control_get_optional(&dev->dev, NULL); + if (IS_ERR(priv->rst)) { + err = PTR_ERR(priv->rst); + if (err == -EPROBE_DEFER) + goto err_put_clks; + priv->rst = NULL; + } else { + err = reset_control_deassert(priv->rst); + if (err) + goto err_put_clks; + } + + if (pdata->big_endian_desc) + ehci->big_endian_desc = 1; + if (pdata->big_endian_mmio) + ehci->big_endian_mmio = 1; + +#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO + if (ehci->big_endian_mmio) { + dev_err(&dev->dev, + "Error: CONFIG_USB_EHCI_BIG_ENDIAN_MMIO not set\n"); + err = -EINVAL; + goto err_reset; + } +#endif +#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC + if (ehci->big_endian_desc) { + dev_err(&dev->dev, + "Error: CONFIG_USB_EHCI_BIG_ENDIAN_DESC not set\n"); + err = -EINVAL; + goto err_reset; + } +#endif + if (pdata->power_on) { err = pdata->power_on(dev); if (err < 0) - return err; - } - - hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, - dev_name(&dev->dev)); - if (!hcd) { - err = -ENOMEM; - goto err_power; + goto err_reset; } hcd->rsrc_start = res_mem->start; @@ -126,22 +256,31 @@ static int ehci_platform_probe(struct platform_device *dev) hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); if (IS_ERR(hcd->regs)) { err = PTR_ERR(hcd->regs); - goto err_put_hcd; + goto err_power; } err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) - goto err_put_hcd; + goto err_power; device_wakeup_enable(hcd->self.controller); platform_set_drvdata(dev, hcd); return err; -err_put_hcd: - usb_put_hcd(hcd); err_power: if (pdata->power_off) pdata->power_off(dev); +err_reset: + if (priv->rst) + reset_control_assert(priv->rst); +err_put_clks: + while (--clk >= 0) + clk_put(priv->clks[clk]); +err_put_hcd: + if (pdata == &ehci_platform_defaults) + dev->dev.platform_data = NULL; + + usb_put_hcd(hcd); return err; } @@ -150,13 +289,22 @@ static int ehci_platform_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); + int clk; usb_remove_hcd(hcd); - usb_put_hcd(hcd); if (pdata->power_off) pdata->power_off(dev); + if (priv->rst) + reset_control_assert(priv->rst); + + for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) + clk_put(priv->clks[clk]); + + usb_put_hcd(hcd); + if (pdata == &ehci_platform_defaults) dev->dev.platform_data = NULL; @@ -175,6 +323,8 @@ static int ehci_platform_suspend(struct device *dev) int ret; ret = ehci_suspend(hcd, do_wakeup); + if (ret) + return ret; if (pdata->power_suspend) pdata->power_suspend(pdev); @@ -207,8 +357,10 @@ static int ehci_platform_resume(struct device *dev) static const struct of_device_id vt8500_ehci_ids[] = { { .compatible = "via,vt8500-ehci", }, { .compatible = "wm,prizm-ehci", }, + { .compatible = "generic-ehci", }, {} }; +MODULE_DEVICE_TABLE(of, vt8500_ehci_ids); static const struct platform_device_id ehci_platform_table[] = { { "ehci-platform", 0 }, diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c index af3974a5e7c..7d75465d97c 100644 --- a/drivers/usb/host/ehci-pmcmsp.c +++ b/drivers/usb/host/ehci-pmcmsp.c @@ -68,9 +68,6 @@ static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci) /* set TWI GPIO USB_HOST_DEV pin high */ gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1); -#ifdef CONFIG_MSP_HAS_DUAL_USB - gpio_direction_output(MSP_PIN_USB1_HOST_DEV, 1); -#endif } /* called during probe() after chip reset completes */ @@ -248,33 +245,6 @@ void usb_hcd_msp_remove(struct usb_hcd *hcd, struct platform_device *dev) usb_put_hcd(hcd); } -#ifdef CONFIG_MSP_HAS_DUAL_USB -/* - * Wrapper around the main ehci_irq. Since both USB host controllers are - * sharing the same IRQ, need to first determine whether we're the intended - * recipient of this interrupt. - */ -static irqreturn_t ehci_msp_irq(struct usb_hcd *hcd) -{ - u32 int_src; - struct device *dev = hcd->self.controller; - struct platform_device *pdev; - struct mspusb_device *mdev; - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - /* need to reverse-map a couple of containers to get our device */ - pdev = to_platform_device(dev); - mdev = to_mspusb_device(pdev); - - /* Check to see if this interrupt is for this host controller */ - int_src = ehci_readl(ehci, &mdev->mab_regs->int_stat); - if (int_src & (1 << pdev->id)) - return ehci_irq(hcd); - - /* Not for this device */ - return IRQ_NONE; -} -#endif /* DUAL_USB */ - static const struct hc_driver ehci_msp_hc_driver = { .description = hcd_name, .product_desc = "PMC MSP EHCI", @@ -283,11 +253,7 @@ static const struct hc_driver ehci_msp_hc_driver = { /* * generic hardware linkage */ -#ifdef CONFIG_MSP_HAS_DUAL_USB - .irq = ehci_msp_irq, -#else .irq = ehci_irq, -#endif .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, /* @@ -334,9 +300,6 @@ static int ehci_hcd_msp_drv_probe(struct platform_device *pdev) return -ENODEV; gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO"); -#ifdef CONFIG_MSP_HAS_DUAL_USB - gpio_request(MSP_PIN_USB1_HOST_DEV, "USB1_HOST_DEV_GPIO"); -#endif ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev); @@ -351,9 +314,6 @@ static int ehci_hcd_msp_drv_remove(struct platform_device *pdev) /* free TWI GPIO USB_HOST_DEV pin */ gpio_free(MSP_PIN_USB0_HOST_DEV); -#ifdef CONFIG_MSP_HAS_DUAL_USB - gpio_free(MSP_PIN_USB1_HOST_DEV); -#endif return 0; } diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 8bd915b2ae8..1d59958ad0c 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -106,16 +106,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - if (!devm_request_mem_region(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { - retval = -EBUSY; - goto err_put_hcd; - } - - hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len); - if (hcd->regs == NULL) { - dev_dbg(&pdev->dev, "error mapping memory\n"); - retval = -ENOMEM; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + retval = PTR_ERR(hcd->regs); goto err_put_hcd; } diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index a8f4471dae7..6fdcb8ad229 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -17,7 +17,6 @@ */ #include <linux/clk.h> -#include <linux/clk/tegra.h> #include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/gpio.h> @@ -29,6 +28,7 @@ #include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/reset.h> #include <linux/slab.h> #include <linux/usb/ehci_def.h> #include <linux/usb/tegra_usb_phy.h> @@ -38,10 +38,6 @@ #include "ehci.h" -#define TEGRA_USB_BASE 0xC5000000 -#define TEGRA_USB2_BASE 0xC5004000 -#define TEGRA_USB3_BASE 0xC5008000 - #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) #define TEGRA_USB_DMA_ALIGN 32 @@ -55,13 +51,10 @@ struct tegra_ehci_soc_config { bool has_hostpc; }; -static int (*orig_hub_control)(struct usb_hcd *hcd, - u16 typeReq, u16 wValue, u16 wIndex, - char *buf, u16 wLength); - struct tegra_ehci_hcd { struct tegra_usb_phy *phy; struct clk *clk; + struct reset_control *rst; int port_resuming; bool needs_double_reset; enum tegra_usb_phy_port_speed port_speed; @@ -239,7 +232,7 @@ static int tegra_ehci_hub_control( spin_unlock_irqrestore(&ehci->lock, flags); /* Handle the hub control events here */ - return orig_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); + return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); done: spin_unlock_irqrestore(&ehci->lock, flags); @@ -385,13 +378,20 @@ static int tegra_ehci_probe(struct platform_device *pdev) goto cleanup_hcd_create; } + tegra->rst = devm_reset_control_get(&pdev->dev, "usb"); + if (IS_ERR(tegra->rst)) { + dev_err(&pdev->dev, "Can't get ehci reset\n"); + err = PTR_ERR(tegra->rst); + goto cleanup_hcd_create; + } + err = clk_prepare_enable(tegra->clk); if (err) goto cleanup_hcd_create; - tegra_periph_reset_assert(tegra->clk); + reset_control_assert(tegra->rst); udelay(1); - tegra_periph_reset_deassert(tegra->clk); + reset_control_deassert(tegra->rst); u_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0); if (IS_ERR(u_phy)) { @@ -411,10 +411,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); - if (!hcd->regs) { - dev_err(&pdev->dev, "Failed to remap I/O memory\n"); - err = -ENOMEM; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + err = PTR_ERR(hcd->regs); goto cleanup_clk_en; } ehci->caps = hcd->regs + 0x100; @@ -505,8 +504,31 @@ static struct platform_driver tegra_ehci_driver = { } }; +static int tegra_ehci_reset(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + int txfifothresh; + + retval = ehci_setup(hcd); + if (retval) + return retval; + + /* + * We should really pull this value out of tegra_ehci_soc_config, but + * to avoid needing access to it, make use of the fact that Tegra20 is + * the only one so far that needs a value of 10, and Tegra20 is the + * only one which doesn't set has_hostpc. + */ + txfifothresh = ehci->has_hostpc ? 0x10 : 10; + ehci_writel(ehci, txfifothresh << 16, &ehci->regs->txfill_tuning); + + return 0; +} + static const struct ehci_driver_overrides tegra_overrides __initconst = { .extra_priv_size = sizeof(struct tegra_ehci_hcd), + .reset = tegra_ehci_reset, }; static int __init ehci_tegra_init(void) @@ -527,8 +549,6 @@ static int __init ehci_tegra_init(void) * too easy. */ - orig_hub_control = tegra_ehci_hc_driver.hub_control; - tegra_ehci_hc_driver.map_urb_for_dma = tegra_ehci_map_urb_for_dma; tegra_ehci_hc_driver.unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma; tegra_ehci_hc_driver.hub_control = tegra_ehci_hub_control; diff --git a/drivers/usb/host/ehci-tilegx.c b/drivers/usb/host/ehci-tilegx.c index f3713d32c9a..0d247673c3c 100644 --- a/drivers/usb/host/ehci-tilegx.c +++ b/drivers/usb/host/ehci-tilegx.c @@ -142,8 +142,8 @@ static int ehci_hcd_tilegx_drv_probe(struct platform_device *pdev) ehci->hcs_params = readl(&ehci->caps->hcs_params); /* Create our IRQs and register them. */ - pdata->irq = create_irq(); - if (pdata->irq < 0) { + pdata->irq = irq_alloc_hwirq(-1); + if (!pdata->irq) { ret = -ENXIO; goto err_no_irq; } @@ -175,7 +175,7 @@ static int ehci_hcd_tilegx_drv_probe(struct platform_device *pdev) } err_have_irq: - destroy_irq(pdata->irq); + irq_free_hwirq(pdata->irq); err_no_irq: tilegx_stop_ehc(); usb_put_hcd(hcd); @@ -193,7 +193,7 @@ static int ehci_hcd_tilegx_drv_remove(struct platform_device *pdev) usb_put_hcd(hcd); tilegx_stop_ehc(); gxio_usb_host_destroy(&pdata->usb_ctx); - destroy_irq(pdata->irq); + irq_free_hwirq(pdata->irq); return 0; } diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 9dfc6c1394d..eee228a26a0 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -872,4 +872,7 @@ extern int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup); extern int ehci_resume(struct usb_hcd *hcd, bool hibernated); #endif /* CONFIG_PM */ +extern int ehci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength); + #endif /* __LINUX_EHCI_HCD_H */ diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index abd5050a489..9162d1b6c0a 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -261,19 +261,8 @@ int fsl_usb2_mpc5121_init(struct platform_device *pdev) struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); struct clk *clk; int err; - char clk_name[10]; - int base, clk_num; - - base = pdev->resource->start & 0xf000; - if (base == 0x3000) - clk_num = 1; - else if (base == 0x4000) - clk_num = 2; - else - return -ENODEV; - snprintf(clk_name, sizeof(clk_name), "usb%d_clk", clk_num); - clk = devm_clk_get(pdev->dev.parent, clk_name); + clk = devm_clk_get(pdev->dev.parent, "ipg"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "failed to get clk\n"); return PTR_ERR(clk); diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c index e07669993f5..d0d8fadf706 100644 --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -261,8 +261,44 @@ static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc) dev_err(dev, "cannot listen to notifications: %d\n", result); goto error_stop; } + /* + * If WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS is set, + * disable transfer notifications. + */ + if (hwahc->wa.quirks & + WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS) { + struct usb_host_interface *cur_altsetting = + hwahc->wa.usb_iface->cur_altsetting; + + result = usb_control_msg(hwahc->wa.usb_dev, + usb_sndctrlpipe(hwahc->wa.usb_dev, 0), + WA_REQ_ALEREON_DISABLE_XFER_NOTIFICATIONS, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_INTERFACE, + WA_REQ_ALEREON_FEATURE_SET, + cur_altsetting->desc.bInterfaceNumber, + NULL, 0, + USB_CTRL_SET_TIMEOUT); + /* + * If we successfully sent the control message, start DTI here + * because no transfer notifications will be received which is + * where DTI is normally started. + */ + if (result == 0) + result = wa_dti_start(&hwahc->wa); + else + result = 0; /* OK. Continue normally. */ + + if (result < 0) { + dev_err(dev, "cannot start DTI: %d\n", result); + goto error_dti_start; + } + } + return result; +error_dti_start: + wa_nep_disarm(&hwahc->wa); error_stop: __wa_clear_feature(&hwahc->wa, WA_ENABLE); return result; @@ -827,10 +863,12 @@ static void hwahc_disconnect(struct usb_interface *usb_iface) static struct usb_device_id hwahc_id_table[] = { /* Alereon 5310 */ { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x02, 0x01), - .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC }, + .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC | + WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS }, /* Alereon 5611 */ { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x02, 0x01), - .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC }, + .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC | + WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS }, /* FIXME: use class labels for this */ { USB_INTERFACE_INFO(0xe0, 0x02, 0x01), }, {}, diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c new file mode 100644 index 00000000000..858efcfda50 --- /dev/null +++ b/drivers/usb/host/max3421-hcd.c @@ -0,0 +1,1957 @@ +/* + * MAX3421 Host Controller driver for USB. + * + * Author: David Mosberger-Tang <davidm@egauge.net> + * + * (C) Copyright 2014 David Mosberger-Tang <davidm@egauge.net> + * + * MAX3421 is a chip implementing a USB 2.0 Full-/Low-Speed host + * controller on a SPI bus. + * + * Based on: + * o MAX3421E datasheet + * http://datasheets.maximintegrated.com/en/ds/MAX3421E.pdf + * o MAX3421E Programming Guide + * http://www.hdl.co.jp/ftpdata/utl-001/AN3785.pdf + * o gadget/dummy_hcd.c + * For USB HCD implementation. + * o Arduino MAX3421 driver + * https://github.com/felis/USB_Host_Shield_2.0/blob/master/Usb.cpp + * + * This file is licenced under the GPL v2. + * + * Important note on worst-case (full-speed) packet size constraints + * (See USB 2.0 Section 5.6.3 and following): + * + * - control: 64 bytes + * - isochronous: 1023 bytes + * - interrupt: 64 bytes + * - bulk: 64 bytes + * + * Since the MAX3421 FIFO size is 64 bytes, we do not have to work about + * multi-FIFO writes/reads for a single USB packet *except* for isochronous + * transfers. We don't support isochronous transfers at this time, so we + * just assume that a USB packet always fits into a single FIFO buffer. + * + * NOTE: The June 2006 version of "MAX3421E Programming Guide" + * (AN3785) has conflicting info for the RCVDAVIRQ bit: + * + * The description of RCVDAVIRQ says "The CPU *must* clear + * this IRQ bit (by writing a 1 to it) before reading the + * RCVFIFO data. + * + * However, the earlier section on "Programming BULK-IN + * Transfers" says * that: + * + * After the CPU retrieves the data, it clears the + * RCVDAVIRQ bit. + * + * The December 2006 version has been corrected and it consistently + * states the second behavior is the correct one. + * + * Synchronous SPI transactions sleep so we can't perform any such + * transactions while holding a spin-lock (and/or while interrupts are + * masked). To achieve this, all SPI transactions are issued from a + * single thread (max3421_spi_thread). + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include <linux/platform_data/max3421-hcd.h> + +#define DRIVER_DESC "MAX3421 USB Host-Controller Driver" +#define DRIVER_VERSION "1.0" + +/* 11-bit counter that wraps around (USB 2.0 Section 8.3.3): */ +#define USB_MAX_FRAME_NUMBER 0x7ff +#define USB_MAX_RETRIES 3 /* # of retries before error is reported */ + +/* + * Max. # of times we're willing to retransmit a request immediately in + * resposne to a NAK. Afterwards, we fall back on trying once a frame. + */ +#define NAK_MAX_FAST_RETRANSMITS 2 + +#define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */ + +/* Port-change mask: */ +#define PORT_C_MASK ((USB_PORT_STAT_C_CONNECTION | \ + USB_PORT_STAT_C_ENABLE | \ + USB_PORT_STAT_C_SUSPEND | \ + USB_PORT_STAT_C_OVERCURRENT | \ + USB_PORT_STAT_C_RESET) << 16) + +enum max3421_rh_state { + MAX3421_RH_RESET, + MAX3421_RH_SUSPENDED, + MAX3421_RH_RUNNING +}; + +enum pkt_state { + PKT_STATE_SETUP, /* waiting to send setup packet to ctrl pipe */ + PKT_STATE_TRANSFER, /* waiting to xfer transfer_buffer */ + PKT_STATE_TERMINATE /* waiting to terminate control transfer */ +}; + +enum scheduling_pass { + SCHED_PASS_PERIODIC, + SCHED_PASS_NON_PERIODIC, + SCHED_PASS_DONE +}; + +struct max3421_dma_buf { + u8 data[2]; +}; + +struct max3421_hcd { + spinlock_t lock; + + struct task_struct *spi_thread; + + struct max3421_hcd *next; + + enum max3421_rh_state rh_state; + /* lower 16 bits contain port status, upper 16 bits the change mask: */ + u32 port_status; + + unsigned active:1; + + struct list_head ep_list; /* list of EP's with work */ + + /* + * The following are owned by spi_thread (may be accessed by + * SPI-thread without acquiring the HCD lock: + */ + u8 rev; /* chip revision */ + u16 frame_number; + /* + * kmalloc'd buffers guaranteed to be in separate (DMA) + * cache-lines: + */ + struct max3421_dma_buf *tx; + struct max3421_dma_buf *rx; + /* + * URB we're currently processing. Must not be reset to NULL + * unless MAX3421E chip is idle: + */ + struct urb *curr_urb; + enum scheduling_pass sched_pass; + struct usb_device *loaded_dev; /* dev that's loaded into the chip */ + int loaded_epnum; /* epnum whose toggles are loaded */ + int urb_done; /* > 0 -> no errors, < 0: errno */ + size_t curr_len; + u8 hien; + u8 mode; + u8 iopins[2]; + unsigned int do_enable_irq:1; + unsigned int do_reset_hcd:1; + unsigned int do_reset_port:1; + unsigned int do_check_unlink:1; + unsigned int do_iopin_update:1; +#ifdef DEBUG + unsigned long err_stat[16]; +#endif +}; + +struct max3421_ep { + struct usb_host_endpoint *ep; + struct list_head ep_list; + u32 naks; + u16 last_active; /* frame # this ep was last active */ + enum pkt_state pkt_state; + u8 retries; + u8 retransmit; /* packet needs retransmission */ +}; + +static struct max3421_hcd *max3421_hcd_list; + +#define MAX3421_FIFO_SIZE 64 + +#define MAX3421_SPI_DIR_RD 0 /* read register from MAX3421 */ +#define MAX3421_SPI_DIR_WR 1 /* write register to MAX3421 */ + +/* SPI commands: */ +#define MAX3421_SPI_DIR_SHIFT 1 +#define MAX3421_SPI_REG_SHIFT 3 + +#define MAX3421_REG_RCVFIFO 1 +#define MAX3421_REG_SNDFIFO 2 +#define MAX3421_REG_SUDFIFO 4 +#define MAX3421_REG_RCVBC 6 +#define MAX3421_REG_SNDBC 7 +#define MAX3421_REG_USBIRQ 13 +#define MAX3421_REG_USBIEN 14 +#define MAX3421_REG_USBCTL 15 +#define MAX3421_REG_CPUCTL 16 +#define MAX3421_REG_PINCTL 17 +#define MAX3421_REG_REVISION 18 +#define MAX3421_REG_IOPINS1 20 +#define MAX3421_REG_IOPINS2 21 +#define MAX3421_REG_GPINIRQ 22 +#define MAX3421_REG_GPINIEN 23 +#define MAX3421_REG_GPINPOL 24 +#define MAX3421_REG_HIRQ 25 +#define MAX3421_REG_HIEN 26 +#define MAX3421_REG_MODE 27 +#define MAX3421_REG_PERADDR 28 +#define MAX3421_REG_HCTL 29 +#define MAX3421_REG_HXFR 30 +#define MAX3421_REG_HRSL 31 + +enum { + MAX3421_USBIRQ_OSCOKIRQ_BIT = 0, + MAX3421_USBIRQ_NOVBUSIRQ_BIT = 5, + MAX3421_USBIRQ_VBUSIRQ_BIT +}; + +enum { + MAX3421_CPUCTL_IE_BIT = 0, + MAX3421_CPUCTL_PULSEWID0_BIT = 6, + MAX3421_CPUCTL_PULSEWID1_BIT +}; + +enum { + MAX3421_USBCTL_PWRDOWN_BIT = 4, + MAX3421_USBCTL_CHIPRES_BIT +}; + +enum { + MAX3421_PINCTL_GPXA_BIT = 0, + MAX3421_PINCTL_GPXB_BIT, + MAX3421_PINCTL_POSINT_BIT, + MAX3421_PINCTL_INTLEVEL_BIT, + MAX3421_PINCTL_FDUPSPI_BIT, + MAX3421_PINCTL_EP0INAK_BIT, + MAX3421_PINCTL_EP2INAK_BIT, + MAX3421_PINCTL_EP3INAK_BIT, +}; + +enum { + MAX3421_HI_BUSEVENT_BIT = 0, /* bus-reset/-resume */ + MAX3421_HI_RWU_BIT, /* remote wakeup */ + MAX3421_HI_RCVDAV_BIT, /* receive FIFO data available */ + MAX3421_HI_SNDBAV_BIT, /* send buffer available */ + MAX3421_HI_SUSDN_BIT, /* suspend operation done */ + MAX3421_HI_CONDET_BIT, /* peripheral connect/disconnect */ + MAX3421_HI_FRAME_BIT, /* frame generator */ + MAX3421_HI_HXFRDN_BIT, /* host transfer done */ +}; + +enum { + MAX3421_HCTL_BUSRST_BIT = 0, + MAX3421_HCTL_FRMRST_BIT, + MAX3421_HCTL_SAMPLEBUS_BIT, + MAX3421_HCTL_SIGRSM_BIT, + MAX3421_HCTL_RCVTOG0_BIT, + MAX3421_HCTL_RCVTOG1_BIT, + MAX3421_HCTL_SNDTOG0_BIT, + MAX3421_HCTL_SNDTOG1_BIT +}; + +enum { + MAX3421_MODE_HOST_BIT = 0, + MAX3421_MODE_LOWSPEED_BIT, + MAX3421_MODE_HUBPRE_BIT, + MAX3421_MODE_SOFKAENAB_BIT, + MAX3421_MODE_SEPIRQ_BIT, + MAX3421_MODE_DELAYISO_BIT, + MAX3421_MODE_DMPULLDN_BIT, + MAX3421_MODE_DPPULLDN_BIT +}; + +enum { + MAX3421_HRSL_OK = 0, + MAX3421_HRSL_BUSY, + MAX3421_HRSL_BADREQ, + MAX3421_HRSL_UNDEF, + MAX3421_HRSL_NAK, + MAX3421_HRSL_STALL, + MAX3421_HRSL_TOGERR, + MAX3421_HRSL_WRONGPID, + MAX3421_HRSL_BADBC, + MAX3421_HRSL_PIDERR, + MAX3421_HRSL_PKTERR, + MAX3421_HRSL_CRCERR, + MAX3421_HRSL_KERR, + MAX3421_HRSL_JERR, + MAX3421_HRSL_TIMEOUT, + MAX3421_HRSL_BABBLE, + MAX3421_HRSL_RESULT_MASK = 0xf, + MAX3421_HRSL_RCVTOGRD_BIT = 4, + MAX3421_HRSL_SNDTOGRD_BIT, + MAX3421_HRSL_KSTATUS_BIT, + MAX3421_HRSL_JSTATUS_BIT +}; + +/* Return same error-codes as ohci.h:cc_to_error: */ +static const int hrsl_to_error[] = { + [MAX3421_HRSL_OK] = 0, + [MAX3421_HRSL_BUSY] = -EINVAL, + [MAX3421_HRSL_BADREQ] = -EINVAL, + [MAX3421_HRSL_UNDEF] = -EINVAL, + [MAX3421_HRSL_NAK] = -EAGAIN, + [MAX3421_HRSL_STALL] = -EPIPE, + [MAX3421_HRSL_TOGERR] = -EILSEQ, + [MAX3421_HRSL_WRONGPID] = -EPROTO, + [MAX3421_HRSL_BADBC] = -EREMOTEIO, + [MAX3421_HRSL_PIDERR] = -EPROTO, + [MAX3421_HRSL_PKTERR] = -EPROTO, + [MAX3421_HRSL_CRCERR] = -EILSEQ, + [MAX3421_HRSL_KERR] = -EIO, + [MAX3421_HRSL_JERR] = -EIO, + [MAX3421_HRSL_TIMEOUT] = -ETIME, + [MAX3421_HRSL_BABBLE] = -EOVERFLOW +}; + +/* + * See http://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a + * reasonable overview of how control transfers use the the IN/OUT + * tokens. + */ +#define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */ +#define MAX3421_HXFR_SETUP 0x10 +#define MAX3421_HXFR_BULK_OUT(ep) (0x20 | (ep)) /* bulk or interrupt */ +#define MAX3421_HXFR_ISO_IN(ep) (0x40 | (ep)) +#define MAX3421_HXFR_ISO_OUT(ep) (0x60 | (ep)) +#define MAX3421_HXFR_HS_IN 0x80 /* handshake in */ +#define MAX3421_HXFR_HS_OUT 0xa0 /* handshake out */ + +#define field(val, bit) ((val) << (bit)) + +static inline s16 +frame_diff(u16 left, u16 right) +{ + return ((unsigned) (left - right)) % (USB_MAX_FRAME_NUMBER + 1); +} + +static inline struct max3421_hcd * +hcd_to_max3421(struct usb_hcd *hcd) +{ + return (struct max3421_hcd *) hcd->hcd_priv; +} + +static inline struct usb_hcd * +max3421_to_hcd(struct max3421_hcd *max3421_hcd) +{ + return container_of((void *) max3421_hcd, struct usb_hcd, hcd_priv); +} + +static u8 +spi_rd8(struct usb_hcd *hcd, unsigned int reg) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct spi_transfer transfer; + struct spi_message msg; + + memset(&transfer, 0, sizeof(transfer)); + + spi_message_init(&msg); + + max3421_hcd->tx->data[0] = + (field(reg, MAX3421_SPI_REG_SHIFT) | + field(MAX3421_SPI_DIR_RD, MAX3421_SPI_DIR_SHIFT)); + + transfer.tx_buf = max3421_hcd->tx->data; + transfer.rx_buf = max3421_hcd->rx->data; + transfer.len = 2; + + spi_message_add_tail(&transfer, &msg); + spi_sync(spi, &msg); + + return max3421_hcd->rx->data[1]; +} + +static void +spi_wr8(struct usb_hcd *hcd, unsigned int reg, u8 val) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct spi_transfer transfer; + struct spi_message msg; + + memset(&transfer, 0, sizeof(transfer)); + + spi_message_init(&msg); + + max3421_hcd->tx->data[0] = + (field(reg, MAX3421_SPI_REG_SHIFT) | + field(MAX3421_SPI_DIR_WR, MAX3421_SPI_DIR_SHIFT)); + max3421_hcd->tx->data[1] = val; + + transfer.tx_buf = max3421_hcd->tx->data; + transfer.len = 2; + + spi_message_add_tail(&transfer, &msg); + spi_sync(spi, &msg); +} + +static void +spi_rd_buf(struct usb_hcd *hcd, unsigned int reg, void *buf, size_t len) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct spi_transfer transfer[2]; + struct spi_message msg; + + memset(transfer, 0, sizeof(transfer)); + + spi_message_init(&msg); + + max3421_hcd->tx->data[0] = + (field(reg, MAX3421_SPI_REG_SHIFT) | + field(MAX3421_SPI_DIR_RD, MAX3421_SPI_DIR_SHIFT)); + transfer[0].tx_buf = max3421_hcd->tx->data; + transfer[0].len = 1; + + transfer[1].rx_buf = buf; + transfer[1].len = len; + + spi_message_add_tail(&transfer[0], &msg); + spi_message_add_tail(&transfer[1], &msg); + spi_sync(spi, &msg); +} + +static void +spi_wr_buf(struct usb_hcd *hcd, unsigned int reg, void *buf, size_t len) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct spi_transfer transfer[2]; + struct spi_message msg; + + memset(transfer, 0, sizeof(transfer)); + + spi_message_init(&msg); + + max3421_hcd->tx->data[0] = + (field(reg, MAX3421_SPI_REG_SHIFT) | + field(MAX3421_SPI_DIR_WR, MAX3421_SPI_DIR_SHIFT)); + + transfer[0].tx_buf = max3421_hcd->tx->data; + transfer[0].len = 1; + + transfer[1].tx_buf = buf; + transfer[1].len = len; + + spi_message_add_tail(&transfer[0], &msg); + spi_message_add_tail(&transfer[1], &msg); + spi_sync(spi, &msg); +} + +/* + * Figure out the correct setting for the LOWSPEED and HUBPRE mode + * bits. The HUBPRE bit needs to be set when MAX3421E operates at + * full speed, but it's talking to a low-speed device (i.e., through a + * hub). Setting that bit ensures that every low-speed packet is + * preceded by a full-speed PRE PID. Possible configurations: + * + * Hub speed: Device speed: => LOWSPEED bit: HUBPRE bit: + * FULL FULL => 0 0 + * FULL LOW => 1 1 + * LOW LOW => 1 0 + * LOW FULL => 1 0 + */ +static void +max3421_set_speed(struct usb_hcd *hcd, struct usb_device *dev) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + u8 mode_lowspeed, mode_hubpre, mode = max3421_hcd->mode; + + mode_lowspeed = BIT(MAX3421_MODE_LOWSPEED_BIT); + mode_hubpre = BIT(MAX3421_MODE_HUBPRE_BIT); + if (max3421_hcd->port_status & USB_PORT_STAT_LOW_SPEED) { + mode |= mode_lowspeed; + mode &= ~mode_hubpre; + } else if (dev->speed == USB_SPEED_LOW) { + mode |= mode_lowspeed | mode_hubpre; + } else { + mode &= ~(mode_lowspeed | mode_hubpre); + } + if (mode != max3421_hcd->mode) { + max3421_hcd->mode = mode; + spi_wr8(hcd, MAX3421_REG_MODE, max3421_hcd->mode); + } + +} + +/* + * Caller must NOT hold HCD spinlock. + */ +static void +max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum, + int force_toggles) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + int old_epnum, same_ep, rcvtog, sndtog; + struct usb_device *old_dev; + u8 hctl; + + old_dev = max3421_hcd->loaded_dev; + old_epnum = max3421_hcd->loaded_epnum; + + same_ep = (dev == old_dev && epnum == old_epnum); + if (same_ep && !force_toggles) + return; + + if (old_dev && !same_ep) { + /* save the old end-points toggles: */ + u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL); + + rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1; + sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1; + + /* no locking: HCD (i.e., we) own toggles, don't we? */ + usb_settoggle(old_dev, old_epnum, 0, rcvtog); + usb_settoggle(old_dev, old_epnum, 1, sndtog); + } + /* setup new endpoint's toggle bits: */ + rcvtog = usb_gettoggle(dev, epnum, 0); + sndtog = usb_gettoggle(dev, epnum, 1); + hctl = (BIT(rcvtog + MAX3421_HCTL_RCVTOG0_BIT) | + BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT)); + + max3421_hcd->loaded_epnum = epnum; + spi_wr8(hcd, MAX3421_REG_HCTL, hctl); + + /* + * Note: devnum for one and the same device can change during + * address-assignment so it's best to just always load the + * address whenever the end-point changed/was forced. + */ + max3421_hcd->loaded_dev = dev; + spi_wr8(hcd, MAX3421_REG_PERADDR, dev->devnum); +} + +static int +max3421_ctrl_setup(struct usb_hcd *hcd, struct urb *urb) +{ + spi_wr_buf(hcd, MAX3421_REG_SUDFIFO, urb->setup_packet, 8); + return MAX3421_HXFR_SETUP; +} + +static int +max3421_transfer_in(struct usb_hcd *hcd, struct urb *urb) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + int epnum = usb_pipeendpoint(urb->pipe); + + max3421_hcd->curr_len = 0; + max3421_hcd->hien |= BIT(MAX3421_HI_RCVDAV_BIT); + return MAX3421_HXFR_BULK_IN(epnum); +} + +static int +max3421_transfer_out(struct usb_hcd *hcd, struct urb *urb, int fast_retransmit) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + int epnum = usb_pipeendpoint(urb->pipe); + u32 max_packet; + void *src; + + src = urb->transfer_buffer + urb->actual_length; + + if (fast_retransmit) { + if (max3421_hcd->rev == 0x12) { + /* work around rev 0x12 bug: */ + spi_wr8(hcd, MAX3421_REG_SNDBC, 0); + spi_wr8(hcd, MAX3421_REG_SNDFIFO, ((u8 *) src)[0]); + spi_wr8(hcd, MAX3421_REG_SNDBC, max3421_hcd->curr_len); + } + return MAX3421_HXFR_BULK_OUT(epnum); + } + + max_packet = usb_maxpacket(urb->dev, urb->pipe, 1); + + if (max_packet > MAX3421_FIFO_SIZE) { + /* + * We do not support isochronous transfers at this + * time. + */ + dev_err(&spi->dev, + "%s: packet-size of %u too big (limit is %u bytes)", + __func__, max_packet, MAX3421_FIFO_SIZE); + max3421_hcd->urb_done = -EMSGSIZE; + return -EMSGSIZE; + } + max3421_hcd->curr_len = min((urb->transfer_buffer_length - + urb->actual_length), max_packet); + + spi_wr_buf(hcd, MAX3421_REG_SNDFIFO, src, max3421_hcd->curr_len); + spi_wr8(hcd, MAX3421_REG_SNDBC, max3421_hcd->curr_len); + return MAX3421_HXFR_BULK_OUT(epnum); +} + +/* + * Issue the next host-transfer command. + * Caller must NOT hold HCD spinlock. + */ +static void +max3421_next_transfer(struct usb_hcd *hcd, int fast_retransmit) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct urb *urb = max3421_hcd->curr_urb; + struct max3421_ep *max3421_ep; + int cmd = -EINVAL; + + if (!urb) + return; /* nothing to do */ + + max3421_ep = urb->ep->hcpriv; + + switch (max3421_ep->pkt_state) { + case PKT_STATE_SETUP: + cmd = max3421_ctrl_setup(hcd, urb); + break; + + case PKT_STATE_TRANSFER: + if (usb_urb_dir_in(urb)) + cmd = max3421_transfer_in(hcd, urb); + else + cmd = max3421_transfer_out(hcd, urb, fast_retransmit); + break; + + case PKT_STATE_TERMINATE: + /* + * IN transfers are terminated with HS_OUT token, + * OUT transfers with HS_IN: + */ + if (usb_urb_dir_in(urb)) + cmd = MAX3421_HXFR_HS_OUT; + else + cmd = MAX3421_HXFR_HS_IN; + break; + } + + if (cmd < 0) + return; + + /* issue the command and wait for host-xfer-done interrupt: */ + + spi_wr8(hcd, MAX3421_REG_HXFR, cmd); + max3421_hcd->hien |= BIT(MAX3421_HI_HXFRDN_BIT); +} + +/* + * Find the next URB to process and start its execution. + * + * At this time, we do not anticipate ever connecting a USB hub to the + * MAX3421 chip, so at most USB device can be connected and we can use + * a simplistic scheduler: at the start of a frame, schedule all + * periodic transfers. Once that is done, use the remainder of the + * frame to process non-periodic (bulk & control) transfers. + * + * Preconditions: + * o Caller must NOT hold HCD spinlock. + * o max3421_hcd->curr_urb MUST BE NULL. + * o MAX3421E chip must be idle. + */ +static int +max3421_select_and_start_urb(struct usb_hcd *hcd) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct urb *urb, *curr_urb = NULL; + struct max3421_ep *max3421_ep; + int epnum, force_toggles = 0; + struct usb_host_endpoint *ep; + struct list_head *pos; + unsigned long flags; + + spin_lock_irqsave(&max3421_hcd->lock, flags); + + for (; + max3421_hcd->sched_pass < SCHED_PASS_DONE; + ++max3421_hcd->sched_pass) + list_for_each(pos, &max3421_hcd->ep_list) { + urb = NULL; + max3421_ep = container_of(pos, struct max3421_ep, + ep_list); + ep = max3421_ep->ep; + + switch (usb_endpoint_type(&ep->desc)) { + case USB_ENDPOINT_XFER_ISOC: + case USB_ENDPOINT_XFER_INT: + if (max3421_hcd->sched_pass != + SCHED_PASS_PERIODIC) + continue; + break; + + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + if (max3421_hcd->sched_pass != + SCHED_PASS_NON_PERIODIC) + continue; + break; + } + + if (list_empty(&ep->urb_list)) + continue; /* nothing to do */ + urb = list_first_entry(&ep->urb_list, struct urb, + urb_list); + if (urb->unlinked) { + dev_dbg(&spi->dev, "%s: URB %p unlinked=%d", + __func__, urb, urb->unlinked); + max3421_hcd->curr_urb = urb; + max3421_hcd->urb_done = 1; + spin_unlock_irqrestore(&max3421_hcd->lock, + flags); + return 1; + } + + switch (usb_endpoint_type(&ep->desc)) { + case USB_ENDPOINT_XFER_CONTROL: + /* + * Allow one control transaction per + * frame per endpoint: + */ + if (frame_diff(max3421_ep->last_active, + max3421_hcd->frame_number) == 0) + continue; + break; + + case USB_ENDPOINT_XFER_BULK: + if (max3421_ep->retransmit + && (frame_diff(max3421_ep->last_active, + max3421_hcd->frame_number) + == 0)) + /* + * We already tried this EP + * during this frame and got a + * NAK or error; wait for next frame + */ + continue; + break; + + case USB_ENDPOINT_XFER_ISOC: + case USB_ENDPOINT_XFER_INT: + if (frame_diff(max3421_hcd->frame_number, + max3421_ep->last_active) + < urb->interval) + /* + * We already processed this + * end-point in the current + * frame + */ + continue; + break; + } + + /* move current ep to tail: */ + list_move_tail(pos, &max3421_hcd->ep_list); + curr_urb = urb; + goto done; + } +done: + if (!curr_urb) { + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + return 0; + } + + urb = max3421_hcd->curr_urb = curr_urb; + epnum = usb_endpoint_num(&urb->ep->desc); + if (max3421_ep->retransmit) + /* restart (part of) a USB transaction: */ + max3421_ep->retransmit = 0; + else { + /* start USB transaction: */ + if (usb_endpoint_xfer_control(&ep->desc)) { + /* + * See USB 2.0 spec section 8.6.1 + * Initialization via SETUP Token: + */ + usb_settoggle(urb->dev, epnum, 0, 1); + usb_settoggle(urb->dev, epnum, 1, 1); + max3421_ep->pkt_state = PKT_STATE_SETUP; + force_toggles = 1; + } else + max3421_ep->pkt_state = PKT_STATE_TRANSFER; + } + + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + + max3421_ep->last_active = max3421_hcd->frame_number; + max3421_set_address(hcd, urb->dev, epnum, force_toggles); + max3421_set_speed(hcd, urb->dev); + max3421_next_transfer(hcd, 0); + return 1; +} + +/* + * Check all endpoints for URBs that got unlinked. + * + * Caller must NOT hold HCD spinlock. + */ +static int +max3421_check_unlink(struct usb_hcd *hcd) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct list_head *pos, *upos, *next_upos; + struct max3421_ep *max3421_ep; + struct usb_host_endpoint *ep; + struct urb *urb; + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&max3421_hcd->lock, flags); + list_for_each(pos, &max3421_hcd->ep_list) { + max3421_ep = container_of(pos, struct max3421_ep, ep_list); + ep = max3421_ep->ep; + list_for_each_safe(upos, next_upos, &ep->urb_list) { + urb = container_of(upos, struct urb, urb_list); + if (urb->unlinked) { + retval = 1; + dev_dbg(&spi->dev, "%s: URB %p unlinked=%d", + __func__, urb, urb->unlinked); + usb_hcd_unlink_urb_from_ep(hcd, urb); + spin_unlock_irqrestore(&max3421_hcd->lock, + flags); + usb_hcd_giveback_urb(hcd, urb, 0); + spin_lock_irqsave(&max3421_hcd->lock, flags); + } + } + } + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + return retval; +} + +/* + * Caller must NOT hold HCD spinlock. + */ +static void +max3421_slow_retransmit(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct urb *urb = max3421_hcd->curr_urb; + struct max3421_ep *max3421_ep; + + max3421_ep = urb->ep->hcpriv; + max3421_ep->retransmit = 1; + max3421_hcd->curr_urb = NULL; +} + +/* + * Caller must NOT hold HCD spinlock. + */ +static void +max3421_recv_data_available(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct urb *urb = max3421_hcd->curr_urb; + size_t remaining, transfer_size; + u8 rcvbc; + + rcvbc = spi_rd8(hcd, MAX3421_REG_RCVBC); + + if (rcvbc > MAX3421_FIFO_SIZE) + rcvbc = MAX3421_FIFO_SIZE; + if (urb->actual_length >= urb->transfer_buffer_length) + remaining = 0; + else + remaining = urb->transfer_buffer_length - urb->actual_length; + transfer_size = rcvbc; + if (transfer_size > remaining) + transfer_size = remaining; + if (transfer_size > 0) { + void *dst = urb->transfer_buffer + urb->actual_length; + + spi_rd_buf(hcd, MAX3421_REG_RCVFIFO, dst, transfer_size); + urb->actual_length += transfer_size; + max3421_hcd->curr_len = transfer_size; + } + + /* ack the RCVDAV irq now that the FIFO has been read: */ + spi_wr8(hcd, MAX3421_REG_HIRQ, BIT(MAX3421_HI_RCVDAV_BIT)); +} + +static void +max3421_handle_error(struct usb_hcd *hcd, u8 hrsl) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + u8 result_code = hrsl & MAX3421_HRSL_RESULT_MASK; + struct urb *urb = max3421_hcd->curr_urb; + struct max3421_ep *max3421_ep = urb->ep->hcpriv; + int switch_sndfifo; + + /* + * If an OUT command results in any response other than OK + * (i.e., error or NAK), we have to perform a dummy-write to + * SNDBC so the FIFO gets switched back to us. Otherwise, we + * get out of sync with the SNDFIFO double buffer. + */ + switch_sndfifo = (max3421_ep->pkt_state == PKT_STATE_TRANSFER && + usb_urb_dir_out(urb)); + + switch (result_code) { + case MAX3421_HRSL_OK: + return; /* this shouldn't happen */ + + case MAX3421_HRSL_WRONGPID: /* received wrong PID */ + case MAX3421_HRSL_BUSY: /* SIE busy */ + case MAX3421_HRSL_BADREQ: /* bad val in HXFR */ + case MAX3421_HRSL_UNDEF: /* reserved */ + case MAX3421_HRSL_KERR: /* K-state instead of response */ + case MAX3421_HRSL_JERR: /* J-state instead of response */ + /* + * packet experienced an error that we cannot recover + * from; report error + */ + max3421_hcd->urb_done = hrsl_to_error[result_code]; + dev_dbg(&spi->dev, "%s: unexpected error HRSL=0x%02x", + __func__, hrsl); + break; + + case MAX3421_HRSL_TOGERR: + if (usb_urb_dir_in(urb)) + ; /* don't do anything (device will switch toggle) */ + else { + /* flip the send toggle bit: */ + int sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1; + + sndtog ^= 1; + spi_wr8(hcd, MAX3421_REG_HCTL, + BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT)); + } + /* FALL THROUGH */ + case MAX3421_HRSL_BADBC: /* bad byte count */ + case MAX3421_HRSL_PIDERR: /* received PID is corrupted */ + case MAX3421_HRSL_PKTERR: /* packet error (stuff, EOP) */ + case MAX3421_HRSL_CRCERR: /* CRC error */ + case MAX3421_HRSL_BABBLE: /* device talked too long */ + case MAX3421_HRSL_TIMEOUT: + if (max3421_ep->retries++ < USB_MAX_RETRIES) + /* retry the packet again in the next frame */ + max3421_slow_retransmit(hcd); + else { + /* Based on ohci.h cc_to_err[]: */ + max3421_hcd->urb_done = hrsl_to_error[result_code]; + dev_dbg(&spi->dev, "%s: unexpected error HRSL=0x%02x", + __func__, hrsl); + } + break; + + case MAX3421_HRSL_STALL: + dev_dbg(&spi->dev, "%s: unexpected error HRSL=0x%02x", + __func__, hrsl); + max3421_hcd->urb_done = hrsl_to_error[result_code]; + break; + + case MAX3421_HRSL_NAK: + /* + * Device wasn't ready for data or has no data + * available: retry the packet again. + */ + if (max3421_ep->naks++ < NAK_MAX_FAST_RETRANSMITS) { + max3421_next_transfer(hcd, 1); + switch_sndfifo = 0; + } else + max3421_slow_retransmit(hcd); + break; + } + if (switch_sndfifo) + spi_wr8(hcd, MAX3421_REG_SNDBC, 0); +} + +/* + * Caller must NOT hold HCD spinlock. + */ +static int +max3421_transfer_in_done(struct usb_hcd *hcd, struct urb *urb) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + u32 max_packet; + + if (urb->actual_length >= urb->transfer_buffer_length) + return 1; /* read is complete, so we're done */ + + /* + * USB 2.0 Section 5.3.2 Pipes: packets must be full size + * except for last one. + */ + max_packet = usb_maxpacket(urb->dev, urb->pipe, 0); + if (max_packet > MAX3421_FIFO_SIZE) { + /* + * We do not support isochronous transfers at this + * time... + */ + dev_err(&spi->dev, + "%s: packet-size of %u too big (limit is %u bytes)", + __func__, max_packet, MAX3421_FIFO_SIZE); + return -EINVAL; + } + + if (max3421_hcd->curr_len < max_packet) { + if (urb->transfer_flags & URB_SHORT_NOT_OK) { + /* + * remaining > 0 and received an + * unexpected partial packet -> + * error + */ + return -EREMOTEIO; + } else + /* short read, but it's OK */ + return 1; + } + return 0; /* not done */ +} + +/* + * Caller must NOT hold HCD spinlock. + */ +static int +max3421_transfer_out_done(struct usb_hcd *hcd, struct urb *urb) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + + urb->actual_length += max3421_hcd->curr_len; + if (urb->actual_length < urb->transfer_buffer_length) + return 0; + if (urb->transfer_flags & URB_ZERO_PACKET) { + /* + * Some hardware needs a zero-size packet at the end + * of a bulk-out transfer if the last transfer was a + * full-sized packet (i.e., such hardware use < + * max_packet as an indicator that the end of the + * packet has been reached). + */ + u32 max_packet = usb_maxpacket(urb->dev, urb->pipe, 1); + + if (max3421_hcd->curr_len == max_packet) + return 0; + } + return 1; +} + +/* + * Caller must NOT hold HCD spinlock. + */ +static void +max3421_host_transfer_done(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct urb *urb = max3421_hcd->curr_urb; + struct max3421_ep *max3421_ep; + u8 result_code, hrsl; + int urb_done = 0; + + max3421_hcd->hien &= ~(BIT(MAX3421_HI_HXFRDN_BIT) | + BIT(MAX3421_HI_RCVDAV_BIT)); + + hrsl = spi_rd8(hcd, MAX3421_REG_HRSL); + result_code = hrsl & MAX3421_HRSL_RESULT_MASK; + +#ifdef DEBUG + ++max3421_hcd->err_stat[result_code]; +#endif + + max3421_ep = urb->ep->hcpriv; + + if (unlikely(result_code != MAX3421_HRSL_OK)) { + max3421_handle_error(hcd, hrsl); + return; + } + + max3421_ep->naks = 0; + max3421_ep->retries = 0; + switch (max3421_ep->pkt_state) { + + case PKT_STATE_SETUP: + if (urb->transfer_buffer_length > 0) + max3421_ep->pkt_state = PKT_STATE_TRANSFER; + else + max3421_ep->pkt_state = PKT_STATE_TERMINATE; + break; + + case PKT_STATE_TRANSFER: + if (usb_urb_dir_in(urb)) + urb_done = max3421_transfer_in_done(hcd, urb); + else + urb_done = max3421_transfer_out_done(hcd, urb); + if (urb_done > 0 && usb_pipetype(urb->pipe) == PIPE_CONTROL) { + /* + * We aren't really done - we still need to + * terminate the control transfer: + */ + max3421_hcd->urb_done = urb_done = 0; + max3421_ep->pkt_state = PKT_STATE_TERMINATE; + } + break; + + case PKT_STATE_TERMINATE: + urb_done = 1; + break; + } + + if (urb_done) + max3421_hcd->urb_done = urb_done; + else + max3421_next_transfer(hcd, 0); +} + +/* + * Caller must NOT hold HCD spinlock. + */ +static void +max3421_detect_conn(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + unsigned int jk, have_conn = 0; + u32 old_port_status, chg; + unsigned long flags; + u8 hrsl, mode; + + hrsl = spi_rd8(hcd, MAX3421_REG_HRSL); + + jk = ((((hrsl >> MAX3421_HRSL_JSTATUS_BIT) & 1) << 0) | + (((hrsl >> MAX3421_HRSL_KSTATUS_BIT) & 1) << 1)); + + mode = max3421_hcd->mode; + + switch (jk) { + case 0x0: /* SE0: disconnect */ + /* + * Turn off SOFKAENAB bit to avoid getting interrupt + * every milli-second: + */ + mode &= ~BIT(MAX3421_MODE_SOFKAENAB_BIT); + break; + + case 0x1: /* J=0,K=1: low-speed (in full-speed or vice versa) */ + case 0x2: /* J=1,K=0: full-speed (in full-speed or vice versa) */ + if (jk == 0x2) + /* need to switch to the other speed: */ + mode ^= BIT(MAX3421_MODE_LOWSPEED_BIT); + /* turn on SOFKAENAB bit: */ + mode |= BIT(MAX3421_MODE_SOFKAENAB_BIT); + have_conn = 1; + break; + + case 0x3: /* illegal */ + break; + } + + max3421_hcd->mode = mode; + spi_wr8(hcd, MAX3421_REG_MODE, max3421_hcd->mode); + + spin_lock_irqsave(&max3421_hcd->lock, flags); + old_port_status = max3421_hcd->port_status; + if (have_conn) + max3421_hcd->port_status |= USB_PORT_STAT_CONNECTION; + else + max3421_hcd->port_status &= ~USB_PORT_STAT_CONNECTION; + if (mode & BIT(MAX3421_MODE_LOWSPEED_BIT)) + max3421_hcd->port_status |= USB_PORT_STAT_LOW_SPEED; + else + max3421_hcd->port_status &= ~USB_PORT_STAT_LOW_SPEED; + chg = (old_port_status ^ max3421_hcd->port_status); + max3421_hcd->port_status |= chg << 16; + spin_unlock_irqrestore(&max3421_hcd->lock, flags); +} + +static irqreturn_t +max3421_irq_handler(int irq, void *dev_id) +{ + struct usb_hcd *hcd = dev_id; + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + + if (max3421_hcd->spi_thread && + max3421_hcd->spi_thread->state != TASK_RUNNING) + wake_up_process(max3421_hcd->spi_thread); + if (!max3421_hcd->do_enable_irq) { + max3421_hcd->do_enable_irq = 1; + disable_irq_nosync(spi->irq); + } + return IRQ_HANDLED; +} + +#ifdef DEBUG + +static void +dump_eps(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct max3421_ep *max3421_ep; + struct usb_host_endpoint *ep; + struct list_head *pos, *upos; + char ubuf[512], *dp, *end; + unsigned long flags; + struct urb *urb; + int epnum, ret; + + spin_lock_irqsave(&max3421_hcd->lock, flags); + list_for_each(pos, &max3421_hcd->ep_list) { + max3421_ep = container_of(pos, struct max3421_ep, ep_list); + ep = max3421_ep->ep; + + dp = ubuf; + end = dp + sizeof(ubuf); + *dp = '\0'; + list_for_each(upos, &ep->urb_list) { + urb = container_of(upos, struct urb, urb_list); + ret = snprintf(dp, end - dp, " %p(%d.%s %d/%d)", urb, + usb_pipetype(urb->pipe), + usb_urb_dir_in(urb) ? "IN" : "OUT", + urb->actual_length, + urb->transfer_buffer_length); + if (ret < 0 || ret >= end - dp) + break; /* error or buffer full */ + dp += ret; + } + + epnum = usb_endpoint_num(&ep->desc); + pr_info("EP%0u %u lst %04u rtr %u nak %6u rxmt %u: %s\n", + epnum, max3421_ep->pkt_state, max3421_ep->last_active, + max3421_ep->retries, max3421_ep->naks, + max3421_ep->retransmit, ubuf); + } + spin_unlock_irqrestore(&max3421_hcd->lock, flags); +} + +#endif /* DEBUG */ + +/* Return zero if no work was performed, 1 otherwise. */ +static int +max3421_handle_irqs(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + u32 chg, old_port_status; + unsigned long flags; + u8 hirq; + + /* + * Read and ack pending interrupts (CPU must never + * clear SNDBAV directly and RCVDAV must be cleared by + * max3421_recv_data_available()!): + */ + hirq = spi_rd8(hcd, MAX3421_REG_HIRQ); + hirq &= max3421_hcd->hien; + if (!hirq) + return 0; + + spi_wr8(hcd, MAX3421_REG_HIRQ, + hirq & ~(BIT(MAX3421_HI_SNDBAV_BIT) | + BIT(MAX3421_HI_RCVDAV_BIT))); + + if (hirq & BIT(MAX3421_HI_FRAME_BIT)) { + max3421_hcd->frame_number = ((max3421_hcd->frame_number + 1) + & USB_MAX_FRAME_NUMBER); + max3421_hcd->sched_pass = SCHED_PASS_PERIODIC; + } + + if (hirq & BIT(MAX3421_HI_RCVDAV_BIT)) + max3421_recv_data_available(hcd); + + if (hirq & BIT(MAX3421_HI_HXFRDN_BIT)) + max3421_host_transfer_done(hcd); + + if (hirq & BIT(MAX3421_HI_CONDET_BIT)) + max3421_detect_conn(hcd); + + /* + * Now process interrupts that may affect HCD state + * other than the end-points: + */ + spin_lock_irqsave(&max3421_hcd->lock, flags); + + old_port_status = max3421_hcd->port_status; + if (hirq & BIT(MAX3421_HI_BUSEVENT_BIT)) { + if (max3421_hcd->port_status & USB_PORT_STAT_RESET) { + /* BUSEVENT due to completion of Bus Reset */ + max3421_hcd->port_status &= ~USB_PORT_STAT_RESET; + max3421_hcd->port_status |= USB_PORT_STAT_ENABLE; + } else { + /* BUSEVENT due to completion of Bus Resume */ + pr_info("%s: BUSEVENT Bus Resume Done\n", __func__); + } + } + if (hirq & BIT(MAX3421_HI_RWU_BIT)) + pr_info("%s: RWU\n", __func__); + if (hirq & BIT(MAX3421_HI_SUSDN_BIT)) + pr_info("%s: SUSDN\n", __func__); + + chg = (old_port_status ^ max3421_hcd->port_status); + max3421_hcd->port_status |= chg << 16; + + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + +#ifdef DEBUG + { + static unsigned long last_time; + char sbuf[16 * 16], *dp, *end; + int i; + + if (jiffies - last_time > 5*HZ) { + dp = sbuf; + end = sbuf + sizeof(sbuf); + *dp = '\0'; + for (i = 0; i < 16; ++i) { + int ret = snprintf(dp, end - dp, " %lu", + max3421_hcd->err_stat[i]); + if (ret < 0 || ret >= end - dp) + break; /* error or buffer full */ + dp += ret; + } + pr_info("%s: hrsl_stats %s\n", __func__, sbuf); + memset(max3421_hcd->err_stat, 0, + sizeof(max3421_hcd->err_stat)); + last_time = jiffies; + + dump_eps(hcd); + } + } +#endif + return 1; +} + +static int +max3421_reset_hcd(struct usb_hcd *hcd) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + int timeout; + + /* perform a chip reset and wait for OSCIRQ signal to appear: */ + spi_wr8(hcd, MAX3421_REG_USBCTL, BIT(MAX3421_USBCTL_CHIPRES_BIT)); + /* clear reset: */ + spi_wr8(hcd, MAX3421_REG_USBCTL, 0); + timeout = 1000; + while (1) { + if (spi_rd8(hcd, MAX3421_REG_USBIRQ) + & BIT(MAX3421_USBIRQ_OSCOKIRQ_BIT)) + break; + if (--timeout < 0) { + dev_err(&spi->dev, + "timed out waiting for oscillator OK signal"); + return 1; + } + cond_resched(); + } + + /* + * Turn on host mode, automatic generation of SOF packets, and + * enable pull-down registers on DM/DP: + */ + max3421_hcd->mode = (BIT(MAX3421_MODE_HOST_BIT) | + BIT(MAX3421_MODE_SOFKAENAB_BIT) | + BIT(MAX3421_MODE_DMPULLDN_BIT) | + BIT(MAX3421_MODE_DPPULLDN_BIT)); + spi_wr8(hcd, MAX3421_REG_MODE, max3421_hcd->mode); + + /* reset frame-number: */ + max3421_hcd->frame_number = USB_MAX_FRAME_NUMBER; + spi_wr8(hcd, MAX3421_REG_HCTL, BIT(MAX3421_HCTL_FRMRST_BIT)); + + /* sample the state of the D+ and D- lines */ + spi_wr8(hcd, MAX3421_REG_HCTL, BIT(MAX3421_HCTL_SAMPLEBUS_BIT)); + max3421_detect_conn(hcd); + + /* enable frame, connection-detected, and bus-event interrupts: */ + max3421_hcd->hien = (BIT(MAX3421_HI_FRAME_BIT) | + BIT(MAX3421_HI_CONDET_BIT) | + BIT(MAX3421_HI_BUSEVENT_BIT)); + spi_wr8(hcd, MAX3421_REG_HIEN, max3421_hcd->hien); + + /* enable interrupts: */ + spi_wr8(hcd, MAX3421_REG_CPUCTL, BIT(MAX3421_CPUCTL_IE_BIT)); + return 1; +} + +static int +max3421_urb_done(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + unsigned long flags; + struct urb *urb; + int status; + + status = max3421_hcd->urb_done; + max3421_hcd->urb_done = 0; + if (status > 0) + status = 0; + urb = max3421_hcd->curr_urb; + if (urb) { + max3421_hcd->curr_urb = NULL; + spin_lock_irqsave(&max3421_hcd->lock, flags); + usb_hcd_unlink_urb_from_ep(hcd, urb); + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + + /* must be called without the HCD spinlock: */ + usb_hcd_giveback_urb(hcd, urb, status); + } + return 1; +} + +static int +max3421_spi_thread(void *dev_id) +{ + struct usb_hcd *hcd = dev_id; + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + int i, i_worked = 1; + + /* set full-duplex SPI mode, low-active interrupt pin: */ + spi_wr8(hcd, MAX3421_REG_PINCTL, + (BIT(MAX3421_PINCTL_FDUPSPI_BIT) | /* full-duplex */ + BIT(MAX3421_PINCTL_INTLEVEL_BIT))); /* low-active irq */ + + while (!kthread_should_stop()) { + max3421_hcd->rev = spi_rd8(hcd, MAX3421_REG_REVISION); + if (max3421_hcd->rev == 0x12 || max3421_hcd->rev == 0x13) + break; + dev_err(&spi->dev, "bad rev 0x%02x", max3421_hcd->rev); + msleep(10000); + } + dev_info(&spi->dev, "rev 0x%x, SPI clk %dHz, bpw %u, irq %d\n", + max3421_hcd->rev, spi->max_speed_hz, spi->bits_per_word, + spi->irq); + + while (!kthread_should_stop()) { + if (!i_worked) { + /* + * We'll be waiting for wakeups from the hard + * interrupt handler, so now is a good time to + * sync our hien with the chip: + */ + spi_wr8(hcd, MAX3421_REG_HIEN, max3421_hcd->hien); + + set_current_state(TASK_INTERRUPTIBLE); + if (max3421_hcd->do_enable_irq) { + max3421_hcd->do_enable_irq = 0; + enable_irq(spi->irq); + } + schedule(); + __set_current_state(TASK_RUNNING); + } + + i_worked = 0; + + if (max3421_hcd->urb_done) + i_worked |= max3421_urb_done(hcd); + else if (max3421_handle_irqs(hcd)) + i_worked = 1; + else if (!max3421_hcd->curr_urb) + i_worked |= max3421_select_and_start_urb(hcd); + + if (max3421_hcd->do_reset_hcd) { + /* reset the HCD: */ + max3421_hcd->do_reset_hcd = 0; + i_worked |= max3421_reset_hcd(hcd); + } + if (max3421_hcd->do_reset_port) { + /* perform a USB bus reset: */ + max3421_hcd->do_reset_port = 0; + spi_wr8(hcd, MAX3421_REG_HCTL, + BIT(MAX3421_HCTL_BUSRST_BIT)); + i_worked = 1; + } + if (max3421_hcd->do_check_unlink) { + max3421_hcd->do_check_unlink = 0; + i_worked |= max3421_check_unlink(hcd); + } + if (max3421_hcd->do_iopin_update) { + /* + * IOPINS1/IOPINS2 do not auto-increment, so we can't + * use spi_wr_buf(). + */ + for (i = 0; i < ARRAY_SIZE(max3421_hcd->iopins); ++i) { + u8 val = spi_rd8(hcd, MAX3421_REG_IOPINS1); + + val = ((val & 0xf0) | + (max3421_hcd->iopins[i] & 0x0f)); + spi_wr8(hcd, MAX3421_REG_IOPINS1 + i, val); + max3421_hcd->iopins[i] = val; + } + max3421_hcd->do_iopin_update = 0; + i_worked = 1; + } + } + set_current_state(TASK_RUNNING); + dev_info(&spi->dev, "SPI thread exiting"); + return 0; +} + +static int +max3421_reset_port(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + + max3421_hcd->port_status &= ~(USB_PORT_STAT_ENABLE | + USB_PORT_STAT_LOW_SPEED); + max3421_hcd->do_reset_port = 1; + wake_up_process(max3421_hcd->spi_thread); + return 0; +} + +static int +max3421_reset(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + + hcd->self.sg_tablesize = 0; + hcd->speed = HCD_USB2; + hcd->self.root_hub->speed = USB_SPEED_FULL; + max3421_hcd->do_reset_hcd = 1; + wake_up_process(max3421_hcd->spi_thread); + return 0; +} + +static int +max3421_start(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + + spin_lock_init(&max3421_hcd->lock); + max3421_hcd->rh_state = MAX3421_RH_RUNNING; + + INIT_LIST_HEAD(&max3421_hcd->ep_list); + + hcd->power_budget = POWER_BUDGET; + hcd->state = HC_STATE_RUNNING; + hcd->uses_new_polling = 1; + return 0; +} + +static void +max3421_stop(struct usb_hcd *hcd) +{ +} + +static int +max3421_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct max3421_ep *max3421_ep; + unsigned long flags; + int retval; + + switch (usb_pipetype(urb->pipe)) { + case PIPE_INTERRUPT: + case PIPE_ISOCHRONOUS: + if (urb->interval < 0) { + dev_err(&spi->dev, + "%s: interval=%d for intr-/iso-pipe; expected > 0\n", + __func__, urb->interval); + return -EINVAL; + } + default: + break; + } + + spin_lock_irqsave(&max3421_hcd->lock, flags); + + max3421_ep = urb->ep->hcpriv; + if (!max3421_ep) { + /* gets freed in max3421_endpoint_disable: */ + max3421_ep = kzalloc(sizeof(struct max3421_ep), mem_flags); + if (!max3421_ep) { + retval = -ENOMEM; + goto out; + } + max3421_ep->ep = urb->ep; + max3421_ep->last_active = max3421_hcd->frame_number; + urb->ep->hcpriv = max3421_ep; + + list_add_tail(&max3421_ep->ep_list, &max3421_hcd->ep_list); + } + + retval = usb_hcd_link_urb_to_ep(hcd, urb); + if (retval == 0) { + /* Since we added to the queue, restart scheduling: */ + max3421_hcd->sched_pass = SCHED_PASS_PERIODIC; + wake_up_process(max3421_hcd->spi_thread); + } + +out: + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + return retval; +} + +static int +max3421_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + unsigned long flags; + int retval; + + spin_lock_irqsave(&max3421_hcd->lock, flags); + + /* + * This will set urb->unlinked which in turn causes the entry + * to be dropped at the next opportunity. + */ + retval = usb_hcd_check_unlink_urb(hcd, urb, status); + if (retval == 0) { + max3421_hcd->do_check_unlink = 1; + wake_up_process(max3421_hcd->spi_thread); + } + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + return retval; +} + +static void +max3421_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + unsigned long flags; + + spin_lock_irqsave(&max3421_hcd->lock, flags); + + if (ep->hcpriv) { + struct max3421_ep *max3421_ep = ep->hcpriv; + + /* remove myself from the ep_list: */ + if (!list_empty(&max3421_ep->ep_list)) + list_del(&max3421_ep->ep_list); + kfree(max3421_ep); + ep->hcpriv = NULL; + } + + spin_unlock_irqrestore(&max3421_hcd->lock, flags); +} + +static int +max3421_get_frame_number(struct usb_hcd *hcd) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + return max3421_hcd->frame_number; +} + +/* + * Should return a non-zero value when any port is undergoing a resume + * transition while the root hub is suspended. + */ +static int +max3421_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&max3421_hcd->lock, flags); + if (!HCD_HW_ACCESSIBLE(hcd)) + goto done; + + *buf = 0; + if ((max3421_hcd->port_status & PORT_C_MASK) != 0) { + *buf = (1 << 1); /* a hub over-current condition exists */ + dev_dbg(hcd->self.controller, + "port status 0x%08x has changes\n", + max3421_hcd->port_status); + retval = 1; + if (max3421_hcd->rh_state == MAX3421_RH_SUSPENDED) + usb_hcd_resume_root_hub(hcd); + } +done: + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + return retval; +} + +static inline void +hub_descriptor(struct usb_hub_descriptor *desc) +{ + memset(desc, 0, sizeof(*desc)); + /* + * See Table 11-13: Hub Descriptor in USB 2.0 spec. + */ + desc->bDescriptorType = 0x29; /* hub descriptor */ + desc->bDescLength = 9; + desc->wHubCharacteristics = cpu_to_le16(0x0001); + desc->bNbrPorts = 1; +} + +/* + * Set the MAX3421E general-purpose output with number PIN_NUMBER to + * VALUE (0 or 1). PIN_NUMBER may be in the range from 1-8. For + * any other value, this function acts as a no-op. + */ +static void +max3421_gpout_set_value(struct usb_hcd *hcd, u8 pin_number, u8 value) +{ + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + u8 mask, idx; + + --pin_number; + if (pin_number > 7) + return; + + mask = 1u << pin_number; + idx = pin_number / 4; + + if (value) + max3421_hcd->iopins[idx] |= mask; + else + max3421_hcd->iopins[idx] &= ~mask; + max3421_hcd->do_iopin_update = 1; + wake_up_process(max3421_hcd->spi_thread); +} + +static int +max3421_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value, u16 index, + char *buf, u16 length) +{ + struct spi_device *spi = to_spi_device(hcd->self.controller); + struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); + struct max3421_hcd_platform_data *pdata; + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&max3421_hcd->lock, flags); + + pdata = spi->dev.platform_data; + + switch (type_req) { + case ClearHubFeature: + break; + case ClearPortFeature: + switch (value) { + case USB_PORT_FEAT_SUSPEND: + break; + case USB_PORT_FEAT_POWER: + dev_dbg(hcd->self.controller, "power-off\n"); + max3421_gpout_set_value(hcd, pdata->vbus_gpout, + !pdata->vbus_active_level); + /* FALLS THROUGH */ + default: + max3421_hcd->port_status &= ~(1 << value); + } + break; + case GetHubDescriptor: + hub_descriptor((struct usb_hub_descriptor *) buf); + break; + + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + case GetPortErrorCount: + case SetHubDepth: + /* USB3 only */ + goto error; + + case GetHubStatus: + *(__le32 *) buf = cpu_to_le32(0); + break; + + case GetPortStatus: + if (index != 1) { + retval = -EPIPE; + goto error; + } + ((__le16 *) buf)[0] = cpu_to_le16(max3421_hcd->port_status); + ((__le16 *) buf)[1] = + cpu_to_le16(max3421_hcd->port_status >> 16); + break; + + case SetHubFeature: + retval = -EPIPE; + break; + + case SetPortFeature: + switch (value) { + case USB_PORT_FEAT_LINK_STATE: + case USB_PORT_FEAT_U1_TIMEOUT: + case USB_PORT_FEAT_U2_TIMEOUT: + case USB_PORT_FEAT_BH_PORT_RESET: + goto error; + case USB_PORT_FEAT_SUSPEND: + if (max3421_hcd->active) + max3421_hcd->port_status |= + USB_PORT_STAT_SUSPEND; + break; + case USB_PORT_FEAT_POWER: + dev_dbg(hcd->self.controller, "power-on\n"); + max3421_hcd->port_status |= USB_PORT_STAT_POWER; + max3421_gpout_set_value(hcd, pdata->vbus_gpout, + pdata->vbus_active_level); + break; + case USB_PORT_FEAT_RESET: + max3421_reset_port(hcd); + /* FALLS THROUGH */ + default: + if ((max3421_hcd->port_status & USB_PORT_STAT_POWER) + != 0) + max3421_hcd->port_status |= (1 << value); + } + break; + + default: + dev_dbg(hcd->self.controller, + "hub control req%04x v%04x i%04x l%d\n", + type_req, value, index, length); +error: /* "protocol stall" on error */ + retval = -EPIPE; + } + + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + return retval; +} + +static int +max3421_bus_suspend(struct usb_hcd *hcd) +{ + return -1; +} + +static int +max3421_bus_resume(struct usb_hcd *hcd) +{ + return -1; +} + +/* + * The SPI driver already takes care of DMA-mapping/unmapping, so no + * reason to do it twice. + */ +static int +max3421_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) +{ + return 0; +} + +static void +max3421_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ +} + +static struct hc_driver max3421_hcd_desc = { + .description = "max3421", + .product_desc = DRIVER_DESC, + .hcd_priv_size = sizeof(struct max3421_hcd), + .flags = HCD_USB11, + .reset = max3421_reset, + .start = max3421_start, + .stop = max3421_stop, + .get_frame_number = max3421_get_frame_number, + .urb_enqueue = max3421_urb_enqueue, + .urb_dequeue = max3421_urb_dequeue, + .map_urb_for_dma = max3421_map_urb_for_dma, + .unmap_urb_for_dma = max3421_unmap_urb_for_dma, + .endpoint_disable = max3421_endpoint_disable, + .hub_status_data = max3421_hub_status_data, + .hub_control = max3421_hub_control, + .bus_suspend = max3421_bus_suspend, + .bus_resume = max3421_bus_resume, +}; + +static int +max3421_probe(struct spi_device *spi) +{ + struct max3421_hcd *max3421_hcd; + struct usb_hcd *hcd = NULL; + int retval = -ENOMEM; + + if (spi_setup(spi) < 0) { + dev_err(&spi->dev, "Unable to setup SPI bus"); + return -EFAULT; + } + + hcd = usb_create_hcd(&max3421_hcd_desc, &spi->dev, + dev_name(&spi->dev)); + if (!hcd) { + dev_err(&spi->dev, "failed to create HCD structure\n"); + goto error; + } + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + max3421_hcd = hcd_to_max3421(hcd); + max3421_hcd->next = max3421_hcd_list; + max3421_hcd_list = max3421_hcd; + INIT_LIST_HEAD(&max3421_hcd->ep_list); + + max3421_hcd->tx = kmalloc(sizeof(*max3421_hcd->tx), GFP_KERNEL); + if (!max3421_hcd->tx) { + dev_err(&spi->dev, "failed to kmalloc tx buffer\n"); + goto error; + } + max3421_hcd->rx = kmalloc(sizeof(*max3421_hcd->rx), GFP_KERNEL); + if (!max3421_hcd->rx) { + dev_err(&spi->dev, "failed to kmalloc rx buffer\n"); + goto error; + } + + max3421_hcd->spi_thread = kthread_run(max3421_spi_thread, hcd, + "max3421_spi_thread"); + if (max3421_hcd->spi_thread == ERR_PTR(-ENOMEM)) { + dev_err(&spi->dev, + "failed to create SPI thread (out of memory)\n"); + goto error; + } + + retval = usb_add_hcd(hcd, 0, 0); + if (retval) { + dev_err(&spi->dev, "failed to add HCD\n"); + goto error; + } + + retval = request_irq(spi->irq, max3421_irq_handler, + IRQF_TRIGGER_LOW, "max3421", hcd); + if (retval < 0) { + dev_err(&spi->dev, "failed to request irq %d\n", spi->irq); + goto error; + } + return 0; + +error: + if (hcd) { + kfree(max3421_hcd->tx); + kfree(max3421_hcd->rx); + if (max3421_hcd->spi_thread) + kthread_stop(max3421_hcd->spi_thread); + usb_put_hcd(hcd); + } + return retval; +} + +static int +max3421_remove(struct spi_device *spi) +{ + struct max3421_hcd *max3421_hcd = NULL, **prev; + struct usb_hcd *hcd = NULL; + unsigned long flags; + + for (prev = &max3421_hcd_list; *prev; prev = &(*prev)->next) { + max3421_hcd = *prev; + hcd = max3421_to_hcd(max3421_hcd); + if (hcd->self.controller == &spi->dev) + break; + } + if (!max3421_hcd) { + dev_err(&spi->dev, "no MAX3421 HCD found for SPI device %p\n", + spi); + return -ENODEV; + } + + usb_remove_hcd(hcd); + + spin_lock_irqsave(&max3421_hcd->lock, flags); + + kthread_stop(max3421_hcd->spi_thread); + *prev = max3421_hcd->next; + + spin_unlock_irqrestore(&max3421_hcd->lock, flags); + + free_irq(spi->irq, hcd); + + usb_put_hcd(hcd); + return 0; +} + +static struct spi_driver max3421_driver = { + .probe = max3421_probe, + .remove = max3421_remove, + .driver = { + .name = "max3421-hcd", + .owner = THIS_MODULE, + }, +}; + +module_spi_driver(max3421_driver); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("David Mosberger <davidm@egauge.net>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 091ae4905cf..e49eb4f90f5 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -46,9 +46,6 @@ static const char hcd_name[] = "ohci-atmel"; static struct hc_driver __read_mostly ohci_at91_hc_driver; static int clocked; -static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, - u16 wValue, u16 wIndex, char *buf, u16 wLength); -static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); extern int usb_disabled(void); @@ -262,7 +259,7 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf) { struct at91_usbh_data *pdata = hcd->self.controller->platform_data; - int length = orig_ohci_hub_status_data(hcd, buf); + int length = ohci_hub_status_data(hcd, buf); int port; at91_for_each_port(port) { @@ -340,8 +337,7 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; } - ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, - buf, wLength); + ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength); if (ret) goto out; @@ -690,9 +686,6 @@ static int __init ohci_at91_init(void) * too easy. */ - orig_ohci_hub_control = ohci_at91_hc_driver.hub_control; - orig_ohci_hub_status_data = ohci_at91_hc_driver.hub_status_data; - ohci_at91_hc_driver.hub_status_data = ohci_at91_hub_status_data; ohci_at91_hc_driver.hub_control = ohci_at91_hub_control; diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 68588d8a09b..060a6a41475 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/phy/phy.h> #include <linux/usb/phy.h> #include <linux/usb/samsung_usb_phy.h> #include <linux/usb.h> @@ -33,28 +34,110 @@ static struct hc_driver __read_mostly exynos_ohci_hc_driver; #define to_exynos_ohci(hcd) (struct exynos_ohci_hcd *)(hcd_to_ohci(hcd)->priv) +#define PHY_NUMBER 3 + struct exynos_ohci_hcd { struct clk *clk; struct usb_phy *phy; struct usb_otg *otg; + struct phy *phy_g[PHY_NUMBER]; }; -static void exynos_ohci_phy_enable(struct platform_device *pdev) +static int exynos_ohci_get_phy(struct device *dev, + struct exynos_ohci_hcd *exynos_ohci) { - struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct device_node *child; + struct phy *phy; + int phy_number; + int ret = 0; + + exynos_ohci->phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (IS_ERR(exynos_ohci->phy)) { + ret = PTR_ERR(exynos_ohci->phy); + if (ret != -ENXIO && ret != -ENODEV) { + dev_err(dev, "no usb2 phy configured\n"); + return ret; + } + dev_dbg(dev, "Failed to get usb2 phy\n"); + } else { + exynos_ohci->otg = exynos_ohci->phy->otg; + } + + /* + * Getting generic phy: + * We are keeping both types of phys as a part of transiting OHCI + * to generic phy framework, so as to maintain backward compatibilty + * with old DTB. + * If there are existing devices using DTB files built from them, + * to remove the support for old bindings in this driver, + * we need to make sure that such devices have their DTBs + * updated to ones built from new DTS. + */ + for_each_available_child_of_node(dev->of_node, child) { + ret = of_property_read_u32(child, "reg", &phy_number); + if (ret) { + dev_err(dev, "Failed to parse device tree\n"); + of_node_put(child); + return ret; + } + + if (phy_number >= PHY_NUMBER) { + dev_err(dev, "Invalid number of PHYs\n"); + of_node_put(child); + return -EINVAL; + } + + phy = devm_of_phy_get(dev, child, 0); + of_node_put(child); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + if (ret != -ENOSYS && ret != -ENODEV) { + dev_err(dev, "no usb2 phy configured\n"); + return ret; + } + dev_dbg(dev, "Failed to get usb2 phy\n"); + } + exynos_ohci->phy_g[phy_number] = phy; + } + + return ret; +} + +static int exynos_ohci_phy_enable(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); + int i; + int ret = 0; + + if (!IS_ERR(exynos_ohci->phy)) + return usb_phy_init(exynos_ohci->phy); + + for (i = 0; ret == 0 && i < PHY_NUMBER; i++) + if (!IS_ERR(exynos_ohci->phy_g[i])) + ret = phy_power_on(exynos_ohci->phy_g[i]); + if (ret) + for (i--; i >= 0; i--) + if (!IS_ERR(exynos_ohci->phy_g[i])) + phy_power_off(exynos_ohci->phy_g[i]); - if (exynos_ohci->phy) - usb_phy_init(exynos_ohci->phy); + return ret; } -static void exynos_ohci_phy_disable(struct platform_device *pdev) +static void exynos_ohci_phy_disable(struct device *dev) { - struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); + int i; - if (exynos_ohci->phy) + if (!IS_ERR(exynos_ohci->phy)) { usb_phy_shutdown(exynos_ohci->phy); + return; + } + + for (i = 0; i < PHY_NUMBER; i++) + if (!IS_ERR(exynos_ohci->phy_g[i])) + phy_power_off(exynos_ohci->phy_g[i]); } static int exynos_ohci_probe(struct platform_device *pdev) @@ -62,7 +145,6 @@ static int exynos_ohci_probe(struct platform_device *pdev) struct exynos_ohci_hcd *exynos_ohci; struct usb_hcd *hcd; struct resource *res; - struct usb_phy *phy; int irq; int err; @@ -88,15 +170,9 @@ static int exynos_ohci_probe(struct platform_device *pdev) "samsung,exynos5440-ohci")) goto skip_phy; - phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (IS_ERR(phy)) { - usb_put_hcd(hcd); - dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); - return -EPROBE_DEFER; - } else { - exynos_ohci->phy = phy; - exynos_ohci->otg = phy->otg; - } + err = exynos_ohci_get_phy(&pdev->dev, exynos_ohci); + if (err) + goto fail_clk; skip_phy: exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost"); @@ -120,10 +196,9 @@ skip_phy: hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&pdev->dev, "Failed to remap I/O memory\n"); - err = -ENOMEM; + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + err = PTR_ERR(hcd->regs); goto fail_io; } @@ -139,7 +214,11 @@ skip_phy: platform_set_drvdata(pdev, hcd); - exynos_ohci_phy_enable(pdev); + err = exynos_ohci_phy_enable(&pdev->dev); + if (err) { + dev_err(&pdev->dev, "Failed to enable USB phy\n"); + goto fail_io; + } err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { @@ -150,7 +229,7 @@ skip_phy: return 0; fail_add_hcd: - exynos_ohci_phy_disable(pdev); + exynos_ohci_phy_disable(&pdev->dev); fail_io: clk_disable_unprepare(exynos_ohci->clk); fail_clk: @@ -168,7 +247,7 @@ static int exynos_ohci_remove(struct platform_device *pdev) if (exynos_ohci->otg) exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); - exynos_ohci_phy_disable(pdev); + exynos_ohci_phy_disable(&pdev->dev); clk_disable_unprepare(exynos_ohci->clk); @@ -190,26 +269,19 @@ static int exynos_ohci_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - struct platform_device *pdev = to_platform_device(dev); bool do_wakeup = device_may_wakeup(dev); - unsigned long flags; int rc = ohci_suspend(hcd, do_wakeup); if (rc) return rc; - spin_lock_irqsave(&ohci->lock, flags); - if (exynos_ohci->otg) exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); - exynos_ohci_phy_disable(pdev); + exynos_ohci_phy_disable(dev); clk_disable_unprepare(exynos_ohci->clk); - spin_unlock_irqrestore(&ohci->lock, flags); - return 0; } @@ -217,14 +289,19 @@ static int exynos_ohci_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); - struct platform_device *pdev = to_platform_device(dev); + int ret; clk_prepare_enable(exynos_ohci->clk); if (exynos_ohci->otg) exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); - exynos_ohci_phy_enable(pdev); + ret = exynos_ohci_phy_enable(dev); + if (ret) { + dev_err(dev, "Failed to enable USB phy\n"); + clk_disable_unprepare(exynos_ohci->clk); + return ret; + } ohci_resume(hcd, false); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 3586460fb2a..f98d03f3144 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1178,7 +1178,7 @@ MODULE_LICENSE ("GPL"); #define SA1111_DRIVER ohci_hcd_sa1111_driver #endif -#ifdef CONFIG_ARCH_DAVINCI_DA8XX +#ifdef CONFIG_USB_OHCI_HCD_DAVINCI #include "ohci-da8xx.c" #define DAVINCI_PLATFORM_DRIVER ohci_hcd_da8xx_driver #endif diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index c81c8721cc5..b4940de1eba 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -90,6 +90,24 @@ __acquires(ohci->lock) dl_done_list (ohci); finish_unlinks (ohci, ohci_frame_no(ohci)); + /* + * Some controllers don't handle "global" suspend properly if + * there are unsuspended ports. For these controllers, put all + * the enabled ports into suspend before suspending the root hub. + */ + if (ohci->flags & OHCI_QUIRK_GLOBAL_SUSPEND) { + __hc32 __iomem *portstat = ohci->regs->roothub.portstatus; + int i; + unsigned temp; + + for (i = 0; i < ohci->num_ports; (++i, ++portstat)) { + temp = ohci_readl(ohci, portstat); + if ((temp & (RH_PS_PES | RH_PS_PSS)) == + RH_PS_PES) + ohci_writel(ohci, RH_PS_PSS, portstat); + } + } + /* maybe resume can wake root hub */ if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) { ohci->hc_control |= OHCI_CTRL_RWE; @@ -438,8 +456,7 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, /* build "status change" packet (one or two bytes) from HC registers */ -static int -ohci_hub_status_data (struct usb_hcd *hcd, char *buf) +int ohci_hub_status_data(struct usb_hcd *hcd, char *buf) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); int i, changed = 0, length = 1; @@ -504,6 +521,7 @@ done: return changed ? length : 0; } +EXPORT_SYMBOL_GPL(ohci_hub_status_data); /*-------------------------------------------------------------------------*/ @@ -646,7 +664,7 @@ static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port) return 0; } -static int ohci_hub_control ( +int ohci_hub_control( struct usb_hcd *hcd, u16 typeReq, u16 wValue, @@ -772,4 +790,4 @@ error: } return retval; } - +EXPORT_SYMBOL_GPL(ohci_hub_control); diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c index af8dc1b92d7..c2c221a332e 100644 --- a/drivers/usb/host/ohci-jz4740.c +++ b/drivers/usb/host/ohci-jz4740.c @@ -82,14 +82,14 @@ static int ohci_jz4740_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { struct jz4740_ohci_hcd *jz4740_ohci = hcd_to_jz4740_hcd(hcd); - int ret; + int ret = 0; switch (typeReq) { - case SetHubFeature: + case SetPortFeature: if (wValue == USB_PORT_FEAT_POWER) ret = ohci_jz4740_set_vbus_power(jz4740_ohci, true); break; - case ClearHubFeature: + case ClearPortFeature: if (wValue == USB_PORT_FEAT_POWER) ret = ohci_jz4740_set_vbus_power(jz4740_ohci, false); break; diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 90879e9ccbe..bb150967572 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -160,6 +160,7 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) ohci_dbg(ohci, "enabled AMD prefetch quirk\n"); } + ohci->flags |= OHCI_QUIRK_GLOBAL_SUSPEND; return 0; } diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index 68f674cd095..4369299064c 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -3,6 +3,7 @@ * * Copyright 2007 Michael Buesch <m@bues.ch> * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> * * Derived from the OCHI-SSB driver * Derived from the OHCI-PCI driver @@ -14,12 +15,16 @@ * Licensed under the GNU/GPL. See COPYING for details. */ +#include <linux/clk.h> +#include <linux/dma-mapping.h> #include <linux/hrtimer.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/err.h> +#include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/reset.h> #include <linux/usb/ohci_pdriver.h> #include <linux/usb.h> #include <linux/usb/hcd.h> @@ -27,6 +32,14 @@ #include "ohci.h" #define DRIVER_DESC "OHCI generic platform driver" +#define OHCI_MAX_CLKS 3 +#define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv) + +struct ohci_platform_priv { + struct clk *clks[OHCI_MAX_CLKS]; + struct reset_control *rst; + struct phy *phy; +}; static const char hcd_name[] = "ohci-platform"; @@ -36,10 +49,6 @@ static int ohci_platform_reset(struct usb_hcd *hcd) struct usb_ohci_pdata *pdata = dev_get_platdata(&pdev->dev); struct ohci_hcd *ohci = hcd_to_ohci(hcd); - if (pdata->big_endian_desc) - ohci->flags |= OHCI_QUIRK_BE_DESC; - if (pdata->big_endian_mmio) - ohci->flags |= OHCI_QUIRK_BE_MMIO; if (pdata->no_big_frame_no) ohci->flags |= OHCI_QUIRK_FRAME_NO; if (pdata->num_ports) @@ -48,11 +57,67 @@ static int ohci_platform_reset(struct usb_hcd *hcd) return ohci_setup(hcd); } +static int ohci_platform_power_on(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); + int clk, ret; + + for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) { + ret = clk_prepare_enable(priv->clks[clk]); + if (ret) + goto err_disable_clks; + } + + if (priv->phy) { + ret = phy_init(priv->phy); + if (ret) + goto err_disable_clks; + + ret = phy_power_on(priv->phy); + if (ret) + goto err_exit_phy; + } + + return 0; + +err_exit_phy: + phy_exit(priv->phy); +err_disable_clks: + while (--clk >= 0) + clk_disable_unprepare(priv->clks[clk]); + + return ret; +} + +static void ohci_platform_power_off(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); + int clk; + + if (priv->phy) { + phy_power_off(priv->phy); + phy_exit(priv->phy); + } + + for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--) + if (priv->clks[clk]) + clk_disable_unprepare(priv->clks[clk]); +} + static struct hc_driver __read_mostly ohci_platform_hc_driver; static const struct ohci_driver_overrides platform_overrides __initconst = { - .product_desc = "Generic Platform OHCI controller", - .reset = ohci_platform_reset, + .product_desc = "Generic Platform OHCI controller", + .reset = ohci_platform_reset, + .extra_priv_size = sizeof(struct ohci_platform_priv), +}; + +static struct usb_ohci_pdata ohci_platform_defaults = { + .power_on = ohci_platform_power_on, + .power_suspend = ohci_platform_power_off, + .power_off = ohci_platform_power_off, }; static int ohci_platform_probe(struct platform_device *dev) @@ -60,17 +125,24 @@ static int ohci_platform_probe(struct platform_device *dev) struct usb_hcd *hcd; struct resource *res_mem; struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev); - int irq; - int err = -ENOMEM; - - if (!pdata) { - WARN_ON(1); - return -ENODEV; - } + struct ohci_platform_priv *priv; + struct ohci_hcd *ohci; + int err, irq, clk = 0; if (usb_disabled()) return -ENODEV; + /* + * Use reasonable defaults so platforms don't have to provide these + * with DT probing on ARM. + */ + if (!pdata) + pdata = &ohci_platform_defaults; + + err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); + if (err) + return err; + irq = platform_get_irq(dev, 0); if (irq < 0) { dev_err(&dev->dev, "no irq provided"); @@ -83,17 +155,85 @@ static int ohci_platform_probe(struct platform_device *dev) return -ENXIO; } + hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, + dev_name(&dev->dev)); + if (!hcd) + return -ENOMEM; + + platform_set_drvdata(dev, hcd); + dev->dev.platform_data = pdata; + priv = hcd_to_ohci_priv(hcd); + ohci = hcd_to_ohci(hcd); + + if (pdata == &ohci_platform_defaults && dev->dev.of_node) { + if (of_property_read_bool(dev->dev.of_node, "big-endian-regs")) + ohci->flags |= OHCI_QUIRK_BE_MMIO; + + if (of_property_read_bool(dev->dev.of_node, "big-endian-desc")) + ohci->flags |= OHCI_QUIRK_BE_DESC; + + if (of_property_read_bool(dev->dev.of_node, "big-endian")) + ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC; + + priv->phy = devm_phy_get(&dev->dev, "usb"); + if (IS_ERR(priv->phy)) { + err = PTR_ERR(priv->phy); + if (err == -EPROBE_DEFER) + goto err_put_hcd; + priv->phy = NULL; + } + + for (clk = 0; clk < OHCI_MAX_CLKS; clk++) { + priv->clks[clk] = of_clk_get(dev->dev.of_node, clk); + if (IS_ERR(priv->clks[clk])) { + err = PTR_ERR(priv->clks[clk]); + if (err == -EPROBE_DEFER) + goto err_put_clks; + priv->clks[clk] = NULL; + break; + } + } + + } + + priv->rst = devm_reset_control_get_optional(&dev->dev, NULL); + if (IS_ERR(priv->rst)) { + err = PTR_ERR(priv->rst); + if (err == -EPROBE_DEFER) + goto err_put_clks; + priv->rst = NULL; + } else { + err = reset_control_deassert(priv->rst); + if (err) + goto err_put_clks; + } + + if (pdata->big_endian_desc) + ohci->flags |= OHCI_QUIRK_BE_DESC; + if (pdata->big_endian_mmio) + ohci->flags |= OHCI_QUIRK_BE_MMIO; + +#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO + if (ohci->flags & OHCI_QUIRK_BE_MMIO) { + dev_err(&dev->dev, + "Error: CONFIG_USB_OHCI_BIG_ENDIAN_MMIO not set\n"); + err = -EINVAL; + goto err_reset; + } +#endif +#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_DESC + if (ohci->flags & OHCI_QUIRK_BE_DESC) { + dev_err(&dev->dev, + "Error: CONFIG_USB_OHCI_BIG_ENDIAN_DESC not set\n"); + err = -EINVAL; + goto err_reset; + } +#endif + if (pdata->power_on) { err = pdata->power_on(dev); if (err < 0) - return err; - } - - hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, - dev_name(&dev->dev)); - if (!hcd) { - err = -ENOMEM; - goto err_power; + goto err_reset; } hcd->rsrc_start = res_mem->start; @@ -102,11 +242,11 @@ static int ohci_platform_probe(struct platform_device *dev) hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); if (IS_ERR(hcd->regs)) { err = PTR_ERR(hcd->regs); - goto err_put_hcd; + goto err_power; } err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) - goto err_put_hcd; + goto err_power; device_wakeup_enable(hcd->self.controller); @@ -114,11 +254,20 @@ static int ohci_platform_probe(struct platform_device *dev) return err; -err_put_hcd: - usb_put_hcd(hcd); err_power: if (pdata->power_off) pdata->power_off(dev); +err_reset: + if (priv->rst) + reset_control_assert(priv->rst); +err_put_clks: + while (--clk >= 0) + clk_put(priv->clks[clk]); +err_put_hcd: + if (pdata == &ohci_platform_defaults) + dev->dev.platform_data = NULL; + + usb_put_hcd(hcd); return err; } @@ -127,13 +276,25 @@ static int ohci_platform_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev); + struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); + int clk; usb_remove_hcd(hcd); - usb_put_hcd(hcd); if (pdata->power_off) pdata->power_off(dev); + if (priv->rst) + reset_control_assert(priv->rst); + + for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) + clk_put(priv->clks[clk]); + + usb_put_hcd(hcd); + + if (pdata == &ohci_platform_defaults) + dev->dev.platform_data = NULL; + return 0; } @@ -180,6 +341,12 @@ static int ohci_platform_resume(struct device *dev) #define ohci_platform_resume NULL #endif /* CONFIG_PM */ +static const struct of_device_id ohci_platform_ids[] = { + { .compatible = "generic-ohci", }, + { } +}; +MODULE_DEVICE_TABLE(of, ohci_platform_ids); + static const struct platform_device_id ohci_platform_table[] = { { "ohci-platform", 0 }, { } @@ -200,6 +367,7 @@ static struct platform_driver ohci_platform_driver = { .owner = THIS_MODULE, .name = "ohci-platform", .pm = &ohci_platform_pm_ops, + .of_match_table = ohci_platform_ids, } }; diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index d21d5fefa76..e68f3d02cd1 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -30,6 +30,7 @@ #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/usb-pxa3xx-ulpi.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include <linux/signal.h> #include <linux/usb.h> #include <linux/usb/hcd.h> @@ -120,6 +121,8 @@ static struct hc_driver __read_mostly ohci_pxa27x_hc_driver; struct pxa27x_ohci { struct clk *clk; void __iomem *mmio_base; + struct regulator *vbus[3]; + bool vbus_enabled[3]; }; #define to_pxa27x_ohci(hcd) (struct pxa27x_ohci *)(hcd_to_ohci(hcd)->priv) @@ -166,6 +169,52 @@ static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *pxa_ohci, int mode) return 0; } +static int pxa27x_ohci_set_vbus_power(struct pxa27x_ohci *pxa_ohci, + unsigned int port, bool enable) +{ + struct regulator *vbus = pxa_ohci->vbus[port]; + int ret = 0; + + if (IS_ERR_OR_NULL(vbus)) + return 0; + + if (enable && !pxa_ohci->vbus_enabled[port]) + ret = regulator_enable(vbus); + else if (!enable && pxa_ohci->vbus_enabled[port]) + ret = regulator_disable(vbus); + + if (ret < 0) + return ret; + + pxa_ohci->vbus_enabled[port] = enable; + + return 0; +} + +static int pxa27x_ohci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd); + int ret; + + switch (typeReq) { + case SetPortFeature: + case ClearPortFeature: + if (!wIndex || wIndex > 3) + return -EPIPE; + + if (wValue != USB_PORT_FEAT_POWER) + break; + + ret = pxa27x_ohci_set_vbus_power(pxa_ohci, wIndex - 1, + typeReq == SetPortFeature); + if (ret) + return ret; + break; + } + + return ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +} /*-------------------------------------------------------------------------*/ static inline void pxa27x_setup_hc(struct pxa27x_ohci *pxa_ohci, @@ -372,6 +421,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device struct ohci_hcd *ohci; struct resource *r; struct clk *usb_clk; + unsigned int i; retval = ohci_pxa_of_init(pdev); if (retval) @@ -417,6 +467,16 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device pxa_ohci->clk = usb_clk; pxa_ohci->mmio_base = (void __iomem *)hcd->regs; + for (i = 0; i < 3; ++i) { + char name[6]; + + if (!(inf->flags & (ENABLE_PORT1 << i))) + continue; + + sprintf(name, "vbus%u", i + 1); + pxa_ohci->vbus[i] = devm_regulator_get(&pdev->dev, name); + } + retval = pxa27x_start_hc(pxa_ohci, &pdev->dev); if (retval < 0) { pr_debug("pxa27x_start_hc failed"); @@ -462,9 +522,14 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev) { struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd); + unsigned int i; usb_remove_hcd(hcd); pxa27x_stop_hc(pxa_ohci, &pdev->dev); + + for (i = 0; i < 3; ++i) + pxa27x_ohci_set_vbus_power(pxa_ohci, i, false); + usb_put_hcd(hcd); } @@ -563,7 +628,10 @@ static int __init ohci_pxa27x_init(void) return -ENODEV; pr_info("%s: " DRIVER_DESC "\n", hcd_name); + ohci_init_driver(&ohci_pxa27x_hc_driver, &pxa27x_overrides); + ohci_pxa27x_hc_driver.hub_control = pxa27x_ohci_hub_control; + return platform_driver_register(&ohci_hcd_pxa27x_driver); } module_init(ohci_pxa27x_init); diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index ff7c8f1c48f..3d753a9d314 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -45,10 +45,6 @@ static struct clk *usb_clk; /* forward definitions */ -static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, - u16 wValue, u16 wIndex, char *buf, u16 wLength); -static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); - static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc); /* conversion functions */ @@ -110,7 +106,7 @@ ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, char *buf) int orig; int portno; - orig = orig_ohci_hub_status_data(hcd, buf); + orig = ohci_hub_status_data(hcd, buf); if (info == NULL) return orig; @@ -181,7 +177,7 @@ static int ohci_s3c2410_hub_control( * process the request straight away and exit */ if (info == NULL) { - ret = orig_ohci_hub_control(hcd, typeReq, wValue, + ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); goto out; } @@ -231,7 +227,7 @@ static int ohci_s3c2410_hub_control( break; } - ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); + ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); if (ret) goto out; @@ -489,9 +485,6 @@ static int __init ohci_s3c2410_init(void) * override these functions by making it too easy. */ - orig_ohci_hub_control = ohci_s3c2410_hc_driver.hub_control; - orig_ohci_hub_status_data = ohci_s3c2410_hc_driver.hub_status_data; - ohci_s3c2410_hc_driver.hub_status_data = ohci_s3c2410_hub_status_data; ohci_s3c2410_hc_driver.hub_control = ohci_s3c2410_hub_control; diff --git a/drivers/usb/host/ohci-tilegx.c b/drivers/usb/host/ohci-tilegx.c index 0b183e0b0a8..bef6dfb0405 100644 --- a/drivers/usb/host/ohci-tilegx.c +++ b/drivers/usb/host/ohci-tilegx.c @@ -129,8 +129,8 @@ static int ohci_hcd_tilegx_drv_probe(struct platform_device *pdev) tilegx_start_ohc(); /* Create our IRQs and register them. */ - pdata->irq = create_irq(); - if (pdata->irq < 0) { + pdata->irq = irq_alloc_hwirq(-1); + if (!pdata->irq) { ret = -ENXIO; goto err_no_irq; } @@ -164,7 +164,7 @@ static int ohci_hcd_tilegx_drv_probe(struct platform_device *pdev) } err_have_irq: - destroy_irq(pdata->irq); + irq_free_hwirq(pdata->irq); err_no_irq: tilegx_stop_ohc(); usb_put_hcd(hcd); @@ -182,7 +182,7 @@ static int ohci_hcd_tilegx_drv_remove(struct platform_device *pdev) usb_put_hcd(hcd); tilegx_stop_ohc(); gxio_usb_host_destroy(&pdata->usb_ctx); - destroy_irq(pdata->irq); + irq_free_hwirq(pdata->irq); return 0; } diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 9250cada13f..05e02a709d4 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -405,6 +405,8 @@ struct ohci_hcd { #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ #define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/ #define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ +#define OHCI_QUIRK_GLOBAL_SUSPEND 0x800 /* must suspend ports */ + // there are also chip quirks/bugs in init logic struct work_struct nec_work; /* Worker for NEC quirk */ @@ -727,3 +729,6 @@ extern int ohci_setup(struct usb_hcd *hcd); extern int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup); extern int ohci_resume(struct usb_hcd *hcd, bool hibernated); #endif +extern int ohci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength); +extern int ohci_hub_status_data(struct usb_hcd *hcd, char *buf); diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 00661d30514..2f3acebb577 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -656,6 +656,14 @@ static const struct dmi_system_id ehci_dmi_nohandoff_table[] = { DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"), }, }, + { + /* HASEE E200 */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "HASEE"), + DMI_MATCH(DMI_BOARD_NAME, "E210"), + DMI_MATCH(DMI_BIOS_VERSION, "6.00"), + }, + }, { } }; @@ -665,9 +673,14 @@ static void ehci_bios_handoff(struct pci_dev *pdev, { int try_handoff = 1, tried_handoff = 0; - /* The Pegatron Lucid tablet sporadically waits for 98 seconds trying - * the handoff on its unused controller. Skip it. */ - if (pdev->vendor == 0x8086 && pdev->device == 0x283a) { + /* + * The Pegatron Lucid tablet sporadically waits for 98 seconds trying + * the handoff on its unused controller. Skip it. + * + * The HASEE E200 hangs when the semaphore is set (bugzilla #77021). + */ + if (pdev->vendor == 0x8086 && (pdev->device == 0x283a || + pdev->device == 0x27cc)) { if (dmi_check_system(ehci_dmi_nohandoff_table)) try_handoff = 0; } @@ -847,6 +860,13 @@ void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) bool ehci_found = false; struct pci_dev *companion = NULL; + /* Sony VAIO t-series with subsystem device ID 90a8 is not capable of + * switching ports from EHCI to xHCI + */ + if (xhci_pdev->subsystem_vendor == PCI_VENDOR_ID_SONY && + xhci_pdev->subsystem_device == 0x90a8) + return; + /* make sure an intel EHCI controller exists */ for_each_pci_dev(companion) { if (companion->class == PCI_CLASS_SERIAL_USB_EHCI && diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index 638e88f7a28..c622ddf21c9 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -5,6 +5,7 @@ void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); int usb_amd_find_chipset_info(void); +int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev); bool usb_amd_hang_symptom_quirk(void); bool usb_amd_prefetch_quirk(void); void usb_amd_dev_put(void); diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index c6c325e4d80..110b4b9ebea 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -94,7 +94,7 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597) int i = 0; if (r8a66597->pdata->on_chip) { - clk_enable(r8a66597->clk); + clk_prepare_enable(r8a66597->clk); do { r8a66597_write(r8a66597, SCKE, SYSCFG0); tmp = r8a66597_read(r8a66597, SYSCFG0); @@ -138,7 +138,7 @@ static void r8a66597_clock_disable(struct r8a66597 *r8a66597) udelay(1); if (r8a66597->pdata->on_chip) { - clk_disable(r8a66597->clk); + clk_disable_unprepare(r8a66597->clk); } else { r8a66597_bclr(r8a66597, PLLC, SYSCFG0); r8a66597_bclr(r8a66597, XCKE, SYSCFG0); diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index 44e6c9da889..01833ab2b5c 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -148,6 +148,7 @@ static void uhci_hcd_platform_shutdown(struct platform_device *op) } static const struct of_device_id platform_uhci_ids[] = { + { .compatible = "generic-uhci", }, { .compatible = "platform-uhci", }, {} }; diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index b016d38199f..eb009a457fb 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -203,12 +203,12 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num) addr, (unsigned int)temp); addr = &ir_set->erst_base; - temp_64 = readq(addr); + temp_64 = xhci_read_64(xhci, addr); xhci_dbg(xhci, " %p: ir_set.erst_base = @%08llx\n", addr, temp_64); addr = &ir_set->erst_dequeue; - temp_64 = readq(addr); + temp_64 = xhci_read_64(xhci, addr); xhci_dbg(xhci, " %p: ir_set.erst_dequeue = @%08llx\n", addr, temp_64); } @@ -412,7 +412,7 @@ void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci) { u64 val; - val = readq(&xhci->op_regs->cmd_ring); + val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = @%08x\n", lower_32_bits(val)); xhci_dbg(xhci, "// xHC command ring deq ptr high bits = @%08x\n", diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 9992fbfec85..aa79e874904 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -20,7 +20,9 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/gfp.h> + +#include <linux/slab.h> +#include <linux/device.h> #include <asm/unaligned.h> #include "xhci.h" @@ -270,7 +272,6 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) struct xhci_virt_device *virt_dev; struct xhci_command *cmd; unsigned long flags; - int timeleft; int ret; int i; @@ -284,34 +285,31 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) spin_lock_irqsave(&xhci->lock, flags); for (i = LAST_EP_INDEX; i > 0; i--) { - if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) - xhci_queue_stop_endpoint(xhci, slot_id, i, suspend); + if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) { + struct xhci_command *command; + command = xhci_alloc_command(xhci, false, false, + GFP_NOWAIT); + if (!command) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_free_command(xhci, cmd); + return -ENOMEM; + + } + xhci_queue_stop_endpoint(xhci, command, slot_id, i, + suspend); + } } - cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring); - list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list); - xhci_queue_stop_endpoint(xhci, slot_id, 0, suspend); + xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend); xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); /* Wait for last stop endpoint command to finish */ - timeleft = wait_for_completion_interruptible_timeout( - cmd->completion, - XHCI_CMD_DEFAULT_TIMEOUT); - if (timeleft <= 0) { - xhci_warn(xhci, "%s while waiting for stop endpoint command\n", - timeleft == 0 ? "Timeout" : "Signal"); - spin_lock_irqsave(&xhci->lock, flags); - /* The timeout might have raced with the event ring handler, so - * only delete from the list if the item isn't poisoned. - */ - if (cmd->cmd_list.next != LIST_POISON1) - list_del(&cmd->cmd_list); - spin_unlock_irqrestore(&xhci->lock, flags); + wait_for_completion(cmd->completion); + + if (cmd->status == COMP_CMD_ABORT || cmd->status == COMP_CMD_STOP) { + xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n"); ret = -ETIME; - goto command_cleanup; } - -command_cleanup: xhci_free_command(xhci, cmd); return ret; } @@ -732,9 +730,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* Set the U1 and U2 exit latencies. */ memcpy(buf, &usb_bos_descriptor, USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE); - temp = readl(&xhci->cap_regs->hcs_params3); - buf[12] = HCS_U1_LATENCY(temp); - put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]); + if ((xhci->quirks & XHCI_LPM_SUPPORT)) { + temp = readl(&xhci->cap_regs->hcs_params3); + buf[12] = HCS_U1_LATENCY(temp); + put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]); + } /* Indicate whether the host has LTM support. */ temp = readl(&xhci->cap_regs->hcc_params); @@ -1140,7 +1140,9 @@ int xhci_bus_suspend(struct usb_hcd *hcd) * including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME * is enabled, so also enable remote wake here. */ - if (hcd->self.root_hub->do_remote_wakeup) { + if (hcd->self.root_hub->do_remote_wakeup + && device_may_wakeup(hcd->self.controller)) { + if (t1 & PORT_CONNECT) { t2 |= PORT_WKOC_E | PORT_WKDISC_E; t2 &= ~PORT_WKCONN_E; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 873c272b3ef..8056d90690e 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -149,14 +149,140 @@ static void xhci_link_rings(struct xhci_hcd *xhci, struct xhci_ring *ring, } } +/* + * We need a radix tree for mapping physical addresses of TRBs to which stream + * ID they belong to. We need to do this because the host controller won't tell + * us which stream ring the TRB came from. We could store the stream ID in an + * event data TRB, but that doesn't help us for the cancellation case, since the + * endpoint may stop before it reaches that event data TRB. + * + * The radix tree maps the upper portion of the TRB DMA address to a ring + * segment that has the same upper portion of DMA addresses. For example, say I + * have segments of size 1KB, that are always 1KB aligned. A segment may + * start at 0x10c91000 and end at 0x10c913f0. If I use the upper 10 bits, the + * key to the stream ID is 0x43244. I can use the DMA address of the TRB to + * pass the radix tree a key to get the right stream ID: + * + * 0x10c90fff >> 10 = 0x43243 + * 0x10c912c0 >> 10 = 0x43244 + * 0x10c91400 >> 10 = 0x43245 + * + * Obviously, only those TRBs with DMA addresses that are within the segment + * will make the radix tree return the stream ID for that ring. + * + * Caveats for the radix tree: + * + * The radix tree uses an unsigned long as a key pair. On 32-bit systems, an + * unsigned long will be 32-bits; on a 64-bit system an unsigned long will be + * 64-bits. Since we only request 32-bit DMA addresses, we can use that as the + * key on 32-bit or 64-bit systems (it would also be fine if we asked for 64-bit + * PCI DMA addresses on a 64-bit system). There might be a problem on 32-bit + * extended systems (where the DMA address can be bigger than 32-bits), + * if we allow the PCI dma mask to be bigger than 32-bits. So don't do that. + */ +static int xhci_insert_segment_mapping(struct radix_tree_root *trb_address_map, + struct xhci_ring *ring, + struct xhci_segment *seg, + gfp_t mem_flags) +{ + unsigned long key; + int ret; + + key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT); + /* Skip any segments that were already added. */ + if (radix_tree_lookup(trb_address_map, key)) + return 0; + + ret = radix_tree_maybe_preload(mem_flags); + if (ret) + return ret; + ret = radix_tree_insert(trb_address_map, + key, ring); + radix_tree_preload_end(); + return ret; +} + +static void xhci_remove_segment_mapping(struct radix_tree_root *trb_address_map, + struct xhci_segment *seg) +{ + unsigned long key; + + key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT); + if (radix_tree_lookup(trb_address_map, key)) + radix_tree_delete(trb_address_map, key); +} + +static int xhci_update_stream_segment_mapping( + struct radix_tree_root *trb_address_map, + struct xhci_ring *ring, + struct xhci_segment *first_seg, + struct xhci_segment *last_seg, + gfp_t mem_flags) +{ + struct xhci_segment *seg; + struct xhci_segment *failed_seg; + int ret; + + if (WARN_ON_ONCE(trb_address_map == NULL)) + return 0; + + seg = first_seg; + do { + ret = xhci_insert_segment_mapping(trb_address_map, + ring, seg, mem_flags); + if (ret) + goto remove_streams; + if (seg == last_seg) + return 0; + seg = seg->next; + } while (seg != first_seg); + + return 0; + +remove_streams: + failed_seg = seg; + seg = first_seg; + do { + xhci_remove_segment_mapping(trb_address_map, seg); + if (seg == failed_seg) + return ret; + seg = seg->next; + } while (seg != first_seg); + + return ret; +} + +static void xhci_remove_stream_mapping(struct xhci_ring *ring) +{ + struct xhci_segment *seg; + + if (WARN_ON_ONCE(ring->trb_address_map == NULL)) + return; + + seg = ring->first_seg; + do { + xhci_remove_segment_mapping(ring->trb_address_map, seg); + seg = seg->next; + } while (seg != ring->first_seg); +} + +static int xhci_update_stream_mapping(struct xhci_ring *ring, gfp_t mem_flags) +{ + return xhci_update_stream_segment_mapping(ring->trb_address_map, ring, + ring->first_seg, ring->last_seg, mem_flags); +} + /* XXX: Do we need the hcd structure in all these functions? */ void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring) { if (!ring) return; - if (ring->first_seg) + if (ring->first_seg) { + if (ring->type == TYPE_STREAM) + xhci_remove_stream_mapping(ring); xhci_free_segments_for_ring(xhci, ring->first_seg); + } kfree(ring); } @@ -349,6 +475,21 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring, if (ret) return -ENOMEM; + if (ring->type == TYPE_STREAM) + ret = xhci_update_stream_segment_mapping(ring->trb_address_map, + ring, first, last, flags); + if (ret) { + struct xhci_segment *next; + do { + next = first->next; + xhci_segment_free(xhci, first); + if (first == last) + break; + first = next; + } while (true); + return ret; + } + xhci_link_rings(xhci, ring, first, last, num_segs); xhci_dbg_trace(xhci, trace_xhci_dbg_ring_expansion, "ring expansion succeed, now has %d segments", @@ -434,12 +575,12 @@ static void xhci_free_stream_ctx(struct xhci_hcd *xhci, struct xhci_stream_ctx *stream_ctx, dma_addr_t dma) { struct device *dev = xhci_to_hcd(xhci)->self.controller; + size_t size = sizeof(struct xhci_stream_ctx) * num_stream_ctxs; - if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE) - dma_free_coherent(dev, - sizeof(struct xhci_stream_ctx)*num_stream_ctxs, + if (size > MEDIUM_STREAM_ARRAY_SIZE) + dma_free_coherent(dev, size, stream_ctx, dma); - else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE) + else if (size <= SMALL_STREAM_ARRAY_SIZE) return dma_pool_free(xhci->small_streams_pool, stream_ctx, dma); else @@ -462,12 +603,12 @@ static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, gfp_t mem_flags) { struct device *dev = xhci_to_hcd(xhci)->self.controller; + size_t size = sizeof(struct xhci_stream_ctx) * num_stream_ctxs; - if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE) - return dma_alloc_coherent(dev, - sizeof(struct xhci_stream_ctx)*num_stream_ctxs, + if (size > MEDIUM_STREAM_ARRAY_SIZE) + return dma_alloc_coherent(dev, size, dma, mem_flags); - else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE) + else if (size <= SMALL_STREAM_ARRAY_SIZE) return dma_pool_alloc(xhci->small_streams_pool, mem_flags, dma); else @@ -510,36 +651,6 @@ struct xhci_ring *xhci_stream_id_to_ring( * The number of stream contexts in the stream context array may be bigger than * the number of streams the driver wants to use. This is because the number of * stream context array entries must be a power of two. - * - * We need a radix tree for mapping physical addresses of TRBs to which stream - * ID they belong to. We need to do this because the host controller won't tell - * us which stream ring the TRB came from. We could store the stream ID in an - * event data TRB, but that doesn't help us for the cancellation case, since the - * endpoint may stop before it reaches that event data TRB. - * - * The radix tree maps the upper portion of the TRB DMA address to a ring - * segment that has the same upper portion of DMA addresses. For example, say I - * have segments of size 1KB, that are always 64-byte aligned. A segment may - * start at 0x10c91000 and end at 0x10c913f0. If I use the upper 10 bits, the - * key to the stream ID is 0x43244. I can use the DMA address of the TRB to - * pass the radix tree a key to get the right stream ID: - * - * 0x10c90fff >> 10 = 0x43243 - * 0x10c912c0 >> 10 = 0x43244 - * 0x10c91400 >> 10 = 0x43245 - * - * Obviously, only those TRBs with DMA addresses that are within the segment - * will make the radix tree return the stream ID for that ring. - * - * Caveats for the radix tree: - * - * The radix tree uses an unsigned long as a key pair. On 32-bit systems, an - * unsigned long will be 32-bits; on a 64-bit system an unsigned long will be - * 64-bits. Since we only request 32-bit DMA addresses, we can use that as the - * key on 32-bit or 64-bit systems (it would also be fine if we asked for 64-bit - * PCI DMA addresses on a 64-bit system). There might be a problem on 32-bit - * extended systems (where the DMA address can be bigger than 32-bits), - * if we allow the PCI dma mask to be bigger than 32-bits. So don't do that. */ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, unsigned int num_stream_ctxs, @@ -548,7 +659,6 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, struct xhci_stream_info *stream_info; u32 cur_stream; struct xhci_ring *cur_ring; - unsigned long key; u64 addr; int ret; @@ -603,6 +713,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, if (!cur_ring) goto cleanup_rings; cur_ring->stream_id = cur_stream; + cur_ring->trb_address_map = &stream_info->trb_address_map; /* Set deq ptr, cycle bit, and stream context type */ addr = cur_ring->first_seg->dma | SCT_FOR_CTX(SCT_PRI_TR) | @@ -612,10 +723,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n", cur_stream, (unsigned long long) addr); - key = (unsigned long) - (cur_ring->first_seg->dma >> TRB_SEGMENT_SHIFT); - ret = radix_tree_insert(&stream_info->trb_address_map, - key, cur_ring); + ret = xhci_update_stream_mapping(cur_ring, mem_flags); if (ret) { xhci_ring_free(xhci, cur_ring); stream_info->stream_rings[cur_stream] = NULL; @@ -635,9 +743,6 @@ cleanup_rings: for (cur_stream = 1; cur_stream < num_streams; cur_stream++) { cur_ring = stream_info->stream_rings[cur_stream]; if (cur_ring) { - addr = cur_ring->first_seg->dma; - radix_tree_delete(&stream_info->trb_address_map, - addr >> TRB_SEGMENT_SHIFT); xhci_ring_free(xhci, cur_ring); stream_info->stream_rings[cur_stream] = NULL; } @@ -698,7 +803,6 @@ void xhci_free_stream_info(struct xhci_hcd *xhci, { int cur_stream; struct xhci_ring *cur_ring; - dma_addr_t addr; if (!stream_info) return; @@ -707,9 +811,6 @@ void xhci_free_stream_info(struct xhci_hcd *xhci, cur_stream++) { cur_ring = stream_info->stream_rings[cur_stream]; if (cur_ring) { - addr = cur_ring->first_seg->dma; - radix_tree_delete(&stream_info->trb_address_map, - addr >> TRB_SEGMENT_SHIFT); xhci_ring_free(xhci, cur_ring); stream_info->stream_rings[cur_stream] = NULL; } @@ -919,7 +1020,6 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, dev->num_rings_cached = 0; init_completion(&dev->cmd_completion); - INIT_LIST_HEAD(&dev->cmd_list); dev->udev = udev; /* Point to output device context in dcbaa. */ @@ -1693,10 +1793,11 @@ void xhci_free_command(struct xhci_hcd *xhci, void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct device *dev = xhci_to_hcd(xhci)->self.controller; - struct xhci_cd *cur_cd, *next_cd; int size; int i, j, num_ports; + del_timer_sync(&xhci->cmd_timer); + /* Free the Event Ring Segment Table and the actual Event Ring */ size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); if (xhci->erst.entries) @@ -1711,15 +1812,20 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) if (xhci->lpm_command) xhci_free_command(xhci, xhci->lpm_command); - xhci->cmd_ring_reserved_trbs = 0; if (xhci->cmd_ring) xhci_ring_free(xhci, xhci->cmd_ring); xhci->cmd_ring = NULL; xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed command ring"); - list_for_each_entry_safe(cur_cd, next_cd, - &xhci->cancel_cmd_list, cancel_cmd_list) { - list_del(&cur_cd->cancel_cmd_list); - kfree(cur_cd); + xhci_cleanup_command_queue(xhci); + + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); + for (i = 0; i < num_ports; i++) { + struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table; + for (j = 0; j < XHCI_MAX_INTERVAL; j++) { + struct list_head *ep = &bwt->interval_bw[j].endpoints; + while (!list_empty(ep)) + list_del_init(ep->next); + } } for (i = 1; i < MAX_HC_SLOTS; ++i) @@ -1757,16 +1863,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) if (!xhci->rh_bw) goto no_bw; - num_ports = HCS_MAX_PORTS(xhci->hcs_params1); - for (i = 0; i < num_ports; i++) { - struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table; - for (j = 0; j < XHCI_MAX_INTERVAL; j++) { - struct list_head *ep = &bwt->interval_bw[j].endpoints; - while (!list_empty(ep)) - list_del_init(ep->next); - } - } - for (i = 0; i < num_ports; i++) { struct xhci_tt_bw_info *tt, *n; list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) { @@ -1776,6 +1872,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } no_bw: + xhci->cmd_ring_reserved_trbs = 0; xhci->num_usb2_ports = 0; xhci->num_usb3_ports = 0; xhci->num_active_eps = 0; @@ -1958,7 +2055,7 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci) xhci_warn(xhci, "WARN something wrong with SW event ring " "dequeue ptr.\n"); /* Update HC event ring dequeue pointer */ - temp = readq(&xhci->ir_set->erst_dequeue); + temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); temp &= ERST_PTR_MASK; /* Don't clear the EHB bit (which is RW1C) because * there might be more events to service. @@ -1967,7 +2064,7 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Write event ring dequeue pointer, " "preserving EHB bit"); - writeq(((u64) deq & (u64) ~ERST_PTR_MASK) | temp, + xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp, &xhci->ir_set->erst_dequeue); } @@ -2222,7 +2319,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) u32 page_size, temp; int i; - INIT_LIST_HEAD(&xhci->cancel_cmd_list); + INIT_LIST_HEAD(&xhci->cmd_list); page_size = readl(&xhci->op_regs->page_size); xhci_dbg_trace(xhci, trace_xhci_dbg_init, @@ -2269,16 +2366,17 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Device context base array address = 0x%llx (DMA), %p (virt)", (unsigned long long)xhci->dcbaa->dma, xhci->dcbaa); - writeq(dma, &xhci->op_regs->dcbaa_ptr); + xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr); /* * Initialize the ring segment pool. The ring must be a contiguous * structure comprised of TRBs. The TRBs must be 16 byte aligned, - * however, the command ring segment needs 64-byte aligned segments, - * so we pick the greater alignment need. + * however, the command ring segment needs 64-byte aligned segments + * and our use of dma addresses in the trb_address_map radix tree needs + * TRB_SEGMENT_SIZE alignment, so we pick the greater alignment need. */ xhci->segment_pool = dma_pool_create("xHCI ring segments", dev, - TRB_SEGMENT_SIZE, 64, xhci->page_size); + TRB_SEGMENT_SIZE, TRB_SEGMENT_SIZE, xhci->page_size); /* See Table 46 and Note on Figure 55 */ xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev, @@ -2312,13 +2410,13 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) (unsigned long long)xhci->cmd_ring->first_seg->dma); /* Set the address in the Command Ring Control register */ - val_64 = readq(&xhci->op_regs->cmd_ring); + val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | (xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) | xhci->cmd_ring->cycle_state; xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Setting command ring address to 0x%x", val); - writeq(val_64, &xhci->op_regs->cmd_ring); + xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); xhci_dbg_cmd_ptrs(xhci); xhci->lpm_command = xhci_alloc_command(xhci, true, true, flags); @@ -2396,10 +2494,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Set ERST base address for ir_set 0 = 0x%llx", (unsigned long long)xhci->erst.erst_dma_addr); - val_64 = readq(&xhci->ir_set->erst_base); + val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base); val_64 &= ERST_PTR_MASK; val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK); - writeq(val_64, &xhci->ir_set->erst_base); + xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base); /* Set the event ring dequeue address */ xhci_set_hc_event_deq(xhci); @@ -2407,6 +2505,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) "Wrote ERST address to ir_set 0."); xhci_print_ir_set(xhci, 0); + /* init command timeout timer */ + init_timer(&xhci->cmd_timer); + xhci->cmd_timer.data = (unsigned long) xhci; + xhci->cmd_timer.function = xhci_handle_command_timeout; + /* * XXX: Might need to set the Interrupter Moderation Register to * something other than the default (~1ms minimum between interrupts). diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c new file mode 100644 index 00000000000..1eefc988192 --- /dev/null +++ b/drivers/usb/host/xhci-mvebu.c @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2014 Marvell + * Author: Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/mbus.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#include "xhci-mvebu.h" + +#define USB3_MAX_WINDOWS 4 +#define USB3_WIN_CTRL(w) (0x0 + ((w) * 8)) +#define USB3_WIN_BASE(w) (0x4 + ((w) * 8)) + +static void xhci_mvebu_mbus_config(void __iomem *base, + const struct mbus_dram_target_info *dram) +{ + int win; + + /* Clear all existing windows */ + for (win = 0; win < USB3_MAX_WINDOWS; win++) { + writel(0, base + USB3_WIN_CTRL(win)); + writel(0, base + USB3_WIN_BASE(win)); + } + + /* Program each DRAM CS in a seperate window */ + for (win = 0; win < dram->num_cs; win++) { + const struct mbus_dram_window *cs = dram->cs + win; + + writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + base + USB3_WIN_CTRL(win)); + + writel((cs->base & 0xffff0000), base + USB3_WIN_BASE(win)); + } +} + +int xhci_mvebu_mbus_init_quirk(struct platform_device *pdev) +{ + struct resource *res; + void __iomem *base; + const struct mbus_dram_target_info *dram; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) + return -ENODEV; + + /* + * We don't use devm_ioremap() because this mapping should + * only exists for the duration of this probe function. + */ + base = ioremap(res->start, resource_size(res)); + if (!base) + return -ENODEV; + + dram = mv_mbus_dram_info(); + xhci_mvebu_mbus_config(base, dram); + + /* + * This memory area was only needed to configure the MBus + * windows, and is therefore no longer useful. + */ + iounmap(base); + + return 0; +} diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h new file mode 100644 index 00000000000..7ede92aa41f --- /dev/null +++ b/drivers/usb/host/xhci-mvebu.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2014 Marvell + * + * Gregory Clement <gregory.clement@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __LINUX_XHCI_MVEBU_H +#define __LINUX_XHCI_MVEBU_H +#if IS_ENABLED(CONFIG_USB_XHCI_MVEBU) +int xhci_mvebu_mbus_init_quirk(struct platform_device *pdev); +#else +static inline int xhci_mvebu_mbus_init_quirk(struct platform_device *pdev) +{ + return 0; +} +#endif +#endif /* __LINUX_XHCI_MVEBU_H */ diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 3c898c12a06..e20520f4275 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -135,15 +135,24 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP) xhci->quirks |= XHCI_SPURIOUS_WAKEUP; } + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) { + xhci->quirks |= XHCI_SPURIOUS_REBOOT; + } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_ASROCK_P67) { xhci->quirks |= XHCI_RESET_ON_RESUME; - xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, - "QUIRK: Resetting on resume"); xhci->quirks |= XHCI_TRUST_TX_LENGTH; } + if (pdev->vendor == PCI_VENDOR_ID_RENESAS && + pdev->device == 0x0015) + xhci->quirks |= XHCI_RESET_ON_RESUME; if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; + + if (xhci->quirks & XHCI_RESET_ON_RESUME) + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, + "QUIRK: Resetting on resume"); } /* called during probe() after chip reset completes */ @@ -185,6 +194,10 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) struct usb_hcd *hcd; driver = (struct hc_driver *)id->driver_data; + + /* Prevent runtime suspending between USB-2 and USB-3 initialization */ + pm_runtime_get_noresume(&dev->dev); + /* Register the USB 2.0 roothub. * FIXME: USB core must know to register the USB 2.0 roothub first. * This is sort of silly, because we could just set the HCD driver flags @@ -194,7 +207,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) retval = usb_hcd_pci_probe(dev, id); if (retval) - return retval; + goto put_runtime_pm; /* USB 2.0 roothub is stored in the PCI device now. */ hcd = dev_get_drvdata(&dev->dev); @@ -217,11 +230,11 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) goto put_usb3_hcd; /* Roothub already marked as USB 3.0 speed */ - /* We know the LPM timeout algorithms for this host, let the USB core - * enable and disable LPM for devices under the USB 3.0 roothub. - */ - if (xhci->quirks & XHCI_LPM_SUPPORT) - hcd_to_bus(xhci->shared_hcd)->root_hub->lpm_capable = 1; + if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + xhci->shared_hcd->can_do_streams = 1; + + /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */ + pm_runtime_put_noidle(&dev->dev); return 0; @@ -229,6 +242,8 @@ put_usb3_hcd: usb_put_hcd(xhci->shared_hcd); dealloc_usb2_hcd: usb_hcd_pci_remove(dev); +put_runtime_pm: + pm_runtime_put_noidle(&dev->dev); return retval; } diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 8abda5c73ca..29d8adb5c8d 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -11,13 +11,15 @@ * version 2 as published by the Free Software Foundation. */ -#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/dma-mapping.h> #include <linux/module.h> -#include <linux/slab.h> #include <linux/of.h> -#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/slab.h> #include "xhci.h" +#include "xhci-mvebu.h" static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) { @@ -35,6 +37,11 @@ static int xhci_plat_setup(struct usb_hcd *hcd) return xhci_gen_setup(hcd, xhci_plat_quirks); } +static int xhci_plat_start(struct usb_hcd *hcd) +{ + return xhci_run(hcd); +} + static const struct hc_driver xhci_plat_xhci_driver = { .description = "xhci-hcd", .product_desc = "xHCI Host Controller", @@ -50,7 +57,7 @@ static const struct hc_driver xhci_plat_xhci_driver = { * basic lifecycle operations */ .reset = xhci_plat_setup, - .start = xhci_run, + .start = xhci_plat_start, .stop = xhci_stop, .shutdown = xhci_shutdown, @@ -91,6 +98,7 @@ static int xhci_plat_probe(struct platform_device *pdev) struct xhci_hcd *xhci; struct resource *res; struct usb_hcd *hcd; + struct clk *clk; int ret; int irq; @@ -107,6 +115,15 @@ static int xhci_plat_probe(struct platform_device *pdev) if (!res) return -ENODEV; + if (of_device_is_compatible(pdev->dev.of_node, + "marvell,armada-375-xhci") || + of_device_is_compatible(pdev->dev.of_node, + "marvell,armada-380-xhci")) { + ret = xhci_mvebu_mbus_init_quirk(pdev); + if (ret) + return ret; + } + /* Initialize dma_mask and coherent_dma_mask to 32-bits */ ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (ret) @@ -137,14 +154,27 @@ static int xhci_plat_probe(struct platform_device *pdev) goto release_mem_region; } + /* + * Not all platforms have a clk so it is not an error if the + * clock does not exists. + */ + clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(clk)) { + ret = clk_prepare_enable(clk); + if (ret) + goto unmap_registers; + } + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) - goto unmap_registers; + goto disable_clk; + device_wakeup_enable(hcd->self.controller); /* USB 2.0 roothub is stored in the platform_device now. */ hcd = platform_get_drvdata(pdev); xhci = hcd_to_xhci(hcd); + xhci->clk = clk; xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev, dev_name(&pdev->dev), hcd); if (!xhci->shared_hcd) { @@ -158,6 +188,9 @@ static int xhci_plat_probe(struct platform_device *pdev) */ *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci; + if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + xhci->shared_hcd->can_do_streams = 1; + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); if (ret) goto put_usb3_hcd; @@ -170,6 +203,10 @@ put_usb3_hcd: dealloc_usb2_hcd: usb_remove_hcd(hcd); +disable_clk: + if (!IS_ERR(clk)) + clk_disable_unprepare(clk); + unmap_registers: iounmap(hcd->regs); @@ -186,11 +223,14 @@ static int xhci_plat_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct clk *clk = xhci->clk; usb_remove_hcd(xhci->shared_hcd); usb_put_hcd(xhci->shared_hcd); usb_remove_hcd(hcd); + if (!IS_ERR(clk)) + clk_disable_unprepare(clk); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); @@ -199,7 +239,7 @@ static int xhci_plat_remove(struct platform_device *dev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int xhci_plat_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -226,7 +266,10 @@ static const struct dev_pm_ops xhci_plat_pm_ops = { #ifdef CONFIG_OF static const struct of_device_id usb_xhci_of_match[] = { + { .compatible = "generic-xhci" }, { .compatible = "xhci-platform" }, + { .compatible = "marvell,armada-375-xhci"}, + { .compatible = "marvell,armada-380-xhci"}, { }, }; MODULE_DEVICE_TABLE(of, usb_xhci_of_match); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index a0b248c3452..749fc68eb5c 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -69,10 +69,6 @@ #include "xhci.h" #include "xhci-trace.h" -static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, - struct xhci_virt_device *virt_dev, - struct xhci_event_cmd *event); - /* * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA * address of the TRB. @@ -123,16 +119,6 @@ static int enqueue_is_link_trb(struct xhci_ring *ring) return TRB_TYPE_LINK_LE32(link->control); } -union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring) -{ - /* Enqueue pointer can be left pointing to the link TRB, - * we must handle that - */ - if (TRB_TYPE_LINK_LE32(ring->enqueue->link.control)) - return ring->enq_seg->next->trbs; - return ring->enqueue; -} - /* Updates trb to point to the next TRB in the ring, and updates seg if the next * TRB is in a new segment. This does not skip over link TRBs, and it does not * effect the ring dequeue or enqueue pointers. @@ -301,19 +287,10 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) xhci_dbg(xhci, "Abort command ring\n"); - if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING)) { - xhci_dbg(xhci, "The command ring isn't running, " - "Have the command ring been stopped?\n"); - return 0; - } - - temp_64 = readq(&xhci->op_regs->cmd_ring); - if (!(temp_64 & CMD_RING_RUNNING)) { - xhci_dbg(xhci, "Command ring had been stopped\n"); - return 0; - } + temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; - writeq(temp_64 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring); + xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, + &xhci->op_regs->cmd_ring); /* Section 4.6.1.2 of xHCI 1.0 spec says software should * time the completion od all xHCI commands, including @@ -336,71 +313,6 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) return 0; } -static int xhci_queue_cd(struct xhci_hcd *xhci, - struct xhci_command *command, - union xhci_trb *cmd_trb) -{ - struct xhci_cd *cd; - cd = kzalloc(sizeof(struct xhci_cd), GFP_ATOMIC); - if (!cd) - return -ENOMEM; - INIT_LIST_HEAD(&cd->cancel_cmd_list); - - cd->command = command; - cd->cmd_trb = cmd_trb; - list_add_tail(&cd->cancel_cmd_list, &xhci->cancel_cmd_list); - - return 0; -} - -/* - * Cancel the command which has issue. - * - * Some commands may hang due to waiting for acknowledgement from - * usb device. It is outside of the xHC's ability to control and - * will cause the command ring is blocked. When it occurs software - * should intervene to recover the command ring. - * See Section 4.6.1.1 and 4.6.1.2 - */ -int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command, - union xhci_trb *cmd_trb) -{ - int retval = 0; - unsigned long flags; - - spin_lock_irqsave(&xhci->lock, flags); - - if (xhci->xhc_state & XHCI_STATE_DYING) { - xhci_warn(xhci, "Abort the command ring," - " but the xHCI is dead.\n"); - retval = -ESHUTDOWN; - goto fail; - } - - /* queue the cmd desriptor to cancel_cmd_list */ - retval = xhci_queue_cd(xhci, command, cmd_trb); - if (retval) { - xhci_warn(xhci, "Queuing command descriptor failed.\n"); - goto fail; - } - - /* abort command ring */ - retval = xhci_abort_cmd_ring(xhci); - if (retval) { - xhci_err(xhci, "Abort command ring failed\n"); - if (unlikely(retval == -ESHUTDOWN)) { - spin_unlock_irqrestore(&xhci->lock, flags); - usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); - xhci_dbg(xhci, "xHCI host controller is dead.\n"); - return retval; - } - } - -fail: - spin_unlock_irqrestore(&xhci->lock, flags); - return retval; -} - void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, @@ -545,10 +457,11 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, struct xhci_dequeue_state *state) { struct xhci_virt_device *dev = xhci->devs[slot_id]; + struct xhci_virt_ep *ep = &dev->eps[ep_index]; struct xhci_ring *ep_ring; struct xhci_generic_trb *trb; - struct xhci_ep_ctx *ep_ctx; dma_addr_t addr; + u64 hw_dequeue; ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id, ep_index, stream_id); @@ -558,56 +471,65 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, stream_id); return; } - state->new_cycle_state = 0; - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Finding segment containing stopped TRB."); - state->new_deq_seg = find_trb_seg(cur_td->start_seg, - dev->eps[ep_index].stopped_trb, - &state->new_cycle_state); - if (!state->new_deq_seg) { - WARN_ON(1); - return; - } /* Dig out the cycle state saved by the xHC during the stop ep cmd */ xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Finding endpoint context"); - ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); - state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq); + /* 4.6.9 the css flag is written to the stream context for streams */ + if (ep->ep_state & EP_HAS_STREAMS) { + struct xhci_stream_ctx *ctx = + &ep->stream_info->stream_ctx_array[stream_id]; + hw_dequeue = le64_to_cpu(ctx->stream_ring); + } else { + struct xhci_ep_ctx *ep_ctx + = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); + hw_dequeue = le64_to_cpu(ep_ctx->deq); + } + + /* Find virtual address and segment of hardware dequeue pointer */ + state->new_deq_seg = ep_ring->deq_seg; + state->new_deq_ptr = ep_ring->dequeue; + while (xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr) + != (dma_addr_t)(hw_dequeue & ~0xf)) { + next_trb(xhci, ep_ring, &state->new_deq_seg, + &state->new_deq_ptr); + if (state->new_deq_ptr == ep_ring->dequeue) { + WARN_ON(1); + return; + } + } + /* + * Find cycle state for last_trb, starting at old cycle state of + * hw_dequeue. If there is only one segment ring, find_trb_seg() will + * return immediately and cannot toggle the cycle state if this search + * wraps around, so add one more toggle manually in that case. + */ + state->new_cycle_state = hw_dequeue & 0x1; + if (ep_ring->first_seg == ep_ring->first_seg->next && + cur_td->last_trb < state->new_deq_ptr) + state->new_cycle_state ^= 0x1; state->new_deq_ptr = cur_td->last_trb; xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Finding segment containing last TRB in TD."); state->new_deq_seg = find_trb_seg(state->new_deq_seg, - state->new_deq_ptr, - &state->new_cycle_state); + state->new_deq_ptr, &state->new_cycle_state); if (!state->new_deq_seg) { WARN_ON(1); return; } + /* Increment to find next TRB after last_trb. Cycle if appropriate. */ trb = &state->new_deq_ptr->generic; if (TRB_TYPE_LINK_LE32(trb->field[3]) && (trb->field[3] & cpu_to_le32(LINK_TOGGLE))) state->new_cycle_state ^= 0x1; next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr); - /* - * If there is only one segment in a ring, find_trb_seg()'s while loop - * will not run, and it will return before it has a chance to see if it - * needs to toggle the cycle bit. It can't tell if the stalled transfer - * ended just before the link TRB on a one-segment ring, or if the TD - * wrapped around the top of the ring, because it doesn't have the TD in - * question. Look for the one-segment case where stalled TRB's address - * is greater than the new dequeue pointer address. - */ - if (ep_ring->first_seg == ep_ring->first_seg->next && - state->new_deq_ptr < dev->eps[ep_index].stopped_trb) - state->new_cycle_state ^= 0x1; + /* Don't update the ring cycle state for the producer (us). */ xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Cycle state = 0x%x", state->new_cycle_state); - /* Don't update the ring cycle state for the producer (us). */ xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "New dequeue segment = %p (virtual)", state->new_deq_seg); @@ -673,12 +595,14 @@ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, } } -static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, +static int queue_set_tr_deq(struct xhci_hcd *xhci, + struct xhci_command *cmd, int slot_id, unsigned int ep_index, unsigned int stream_id, struct xhci_segment *deq_seg, union xhci_trb *deq_ptr, u32 cycle_state); void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, + struct xhci_command *cmd, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id, struct xhci_dequeue_state *deq_state) @@ -693,7 +617,7 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, deq_state->new_deq_ptr, (unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr), deq_state->new_cycle_state); - queue_set_tr_deq(xhci, slot_id, ep_index, stream_id, + queue_set_tr_deq(xhci, cmd, slot_id, ep_index, stream_id, deq_state->new_deq_seg, deq_state->new_deq_ptr, (u32) deq_state->new_cycle_state); @@ -762,7 +686,6 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id, union xhci_trb *trb, struct xhci_event_cmd *event) { unsigned int ep_index; - struct xhci_virt_device *virt_dev; struct xhci_ring *ep_ring; struct xhci_virt_ep *ep; struct list_head *entry; @@ -772,11 +695,7 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id, struct xhci_dequeue_state deq_state; if (unlikely(TRB_TO_SUSPEND_PORT(le32_to_cpu(trb->generic.field[3])))) { - virt_dev = xhci->devs[slot_id]; - if (virt_dev) - handle_cmd_in_cmd_wait_list(xhci, virt_dev, - event); - else + if (!xhci->devs[slot_id]) xhci_warn(xhci, "Stop endpoint command " "completion for disabled slot %u\n", slot_id); @@ -790,7 +709,6 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id, if (list_empty(&ep->cancelled_td_list)) { xhci_stop_watchdog_timer_in_irq(xhci, ep); ep->stopped_td = NULL; - ep->stopped_trb = NULL; ring_doorbell_for_active_rings(xhci, slot_id, ep_index); return; } @@ -848,7 +766,9 @@ remove_finished_td: /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */ if (deq_state.new_deq_ptr && deq_state.new_deq_seg) { - xhci_queue_new_dequeue_state(xhci, + struct xhci_command *command; + command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); + xhci_queue_new_dequeue_state(xhci, command, slot_id, ep_index, ep->stopped_td->urb->stream_id, &deq_state); @@ -858,11 +778,9 @@ remove_finished_td: ring_doorbell_for_active_rings(xhci, slot_id, ep_index); } - /* Clear stopped_td and stopped_trb if endpoint is not halted */ - if (!(ep->ep_state & EP_HALTED)) { + /* Clear stopped_td if endpoint is not halted */ + if (!(ep->ep_state & EP_HALTED)) ep->stopped_td = NULL; - ep->stopped_trb = NULL; - } /* * Drop the lock and complete the URBs in the cancelled TD list. @@ -891,6 +809,57 @@ remove_finished_td: /* Return to the event handler with xhci->lock re-acquired */ } +static void xhci_kill_ring_urbs(struct xhci_hcd *xhci, struct xhci_ring *ring) +{ + struct xhci_td *cur_td; + + while (!list_empty(&ring->td_list)) { + cur_td = list_first_entry(&ring->td_list, + struct xhci_td, td_list); + list_del_init(&cur_td->td_list); + if (!list_empty(&cur_td->cancelled_td_list)) + list_del_init(&cur_td->cancelled_td_list); + xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN); + } +} + +static void xhci_kill_endpoint_urbs(struct xhci_hcd *xhci, + int slot_id, int ep_index) +{ + struct xhci_td *cur_td; + struct xhci_virt_ep *ep; + struct xhci_ring *ring; + + ep = &xhci->devs[slot_id]->eps[ep_index]; + if ((ep->ep_state & EP_HAS_STREAMS) || + (ep->ep_state & EP_GETTING_NO_STREAMS)) { + int stream_id; + + for (stream_id = 0; stream_id < ep->stream_info->num_streams; + stream_id++) { + xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, + "Killing URBs for slot ID %u, ep index %u, stream %u", + slot_id, ep_index, stream_id + 1); + xhci_kill_ring_urbs(xhci, + ep->stream_info->stream_rings[stream_id]); + } + } else { + ring = ep->ring; + if (!ring) + return; + xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, + "Killing URBs for slot ID %u, ep index %u", + slot_id, ep_index); + xhci_kill_ring_urbs(xhci, ring); + } + while (!list_empty(&ep->cancelled_td_list)) { + cur_td = list_first_entry(&ep->cancelled_td_list, + struct xhci_td, cancelled_td_list); + list_del_init(&cur_td->cancelled_td_list); + xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN); + } +} + /* Watchdog timer function for when a stop endpoint command fails to complete. * In this case, we assume the host controller is broken or dying or dead. The * host may still be completing some other events, so we have to be careful to @@ -914,9 +883,6 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) { struct xhci_hcd *xhci; struct xhci_virt_ep *ep; - struct xhci_virt_ep *temp_ep; - struct xhci_ring *ring; - struct xhci_td *cur_td; int ret, i, j; unsigned long flags; @@ -973,34 +939,8 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) for (i = 0; i < MAX_HC_SLOTS; i++) { if (!xhci->devs[i]) continue; - for (j = 0; j < 31; j++) { - temp_ep = &xhci->devs[i]->eps[j]; - ring = temp_ep->ring; - if (!ring) - continue; - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Killing URBs for slot ID %u, " - "ep index %u", i, j); - while (!list_empty(&ring->td_list)) { - cur_td = list_first_entry(&ring->td_list, - struct xhci_td, - td_list); - list_del_init(&cur_td->td_list); - if (!list_empty(&cur_td->cancelled_td_list)) - list_del_init(&cur_td->cancelled_td_list); - xhci_giveback_urb_in_irq(xhci, cur_td, - -ESHUTDOWN); - } - while (!list_empty(&temp_ep->cancelled_td_list)) { - cur_td = list_first_entry( - &temp_ep->cancelled_td_list, - struct xhci_td, - cancelled_td_list); - list_del_init(&cur_td->cancelled_td_list); - xhci_giveback_urb_in_irq(xhci, cur_td, - -ESHUTDOWN); - } - } + for (j = 0; j < 31; j++) + xhci_kill_endpoint_urbs(xhci, i, j); } spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, @@ -1072,17 +1012,18 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id, unsigned int stream_id; struct xhci_ring *ep_ring; struct xhci_virt_device *dev; + struct xhci_virt_ep *ep; struct xhci_ep_ctx *ep_ctx; struct xhci_slot_ctx *slot_ctx; ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3])); stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2])); dev = xhci->devs[slot_id]; + ep = &dev->eps[ep_index]; ep_ring = xhci_stream_id_to_ring(dev, ep_index, stream_id); if (!ep_ring) { - xhci_warn(xhci, "WARN Set TR deq ptr command for " - "freed stream ID %u\n", + xhci_warn(xhci, "WARN Set TR deq ptr command for freed stream ID %u\n", stream_id); /* XXX: Harmless??? */ dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING; @@ -1098,12 +1039,10 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id, switch (cmd_comp_code) { case COMP_TRB_ERR: - xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because " - "of stream ID configuration\n"); + xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because of stream ID configuration\n"); break; case COMP_CTX_STATE: - xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due " - "to incorrect slot or ep state.\n"); + xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.\n"); ep_state = le32_to_cpu(ep_ctx->ep_info); ep_state &= EP_STATE_MASK; slot_state = le32_to_cpu(slot_ctx->dev_state); @@ -1113,13 +1052,12 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id, slot_state, ep_state); break; case COMP_EBADSLT: - xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because " - "slot %u was not enabled.\n", slot_id); + xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because slot %u was not enabled.\n", + slot_id); break; default: - xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown " - "completion code of %u.\n", - cmd_comp_code); + xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown completion code of %u.\n", + cmd_comp_code); break; } /* OK what do we do now? The endpoint state is hosed, and we @@ -1129,23 +1067,28 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id, * cancelling URBs, which might not be an error... */ } else { + u64 deq; + /* 4.6.10 deq ptr is written to the stream ctx for streams */ + if (ep->ep_state & EP_HAS_STREAMS) { + struct xhci_stream_ctx *ctx = + &ep->stream_info->stream_ctx_array[stream_id]; + deq = le64_to_cpu(ctx->stream_ring) & SCTX_DEQ_MASK; + } else { + deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK; + } xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Successful Set TR Deq Ptr cmd, deq = @%08llx", - le64_to_cpu(ep_ctx->deq)); - if (xhci_trb_virt_to_dma(dev->eps[ep_index].queued_deq_seg, - dev->eps[ep_index].queued_deq_ptr) == - (le64_to_cpu(ep_ctx->deq) & ~(EP_CTX_CYCLE_MASK))) { + "Successful Set TR Deq Ptr cmd, deq = @%08llx", deq); + if (xhci_trb_virt_to_dma(ep->queued_deq_seg, + ep->queued_deq_ptr) == deq) { /* Update the ring's dequeue segment and dequeue pointer * to reflect the new position. */ update_ring_for_set_deq_completion(xhci, dev, ep_ring, ep_index); } else { - xhci_warn(xhci, "Mismatch between completed Set TR Deq " - "Ptr command & xHCI internal state.\n"); + xhci_warn(xhci, "Mismatch between completed Set TR Deq Ptr command & xHCI internal state.\n"); xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n", - dev->eps[ep_index].queued_deq_seg, - dev->eps[ep_index].queued_deq_ptr); + ep->queued_deq_seg, ep->queued_deq_ptr); } } @@ -1173,9 +1116,11 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id, * because the HW can't handle two commands being queued in a row. */ if (xhci->quirks & XHCI_RESET_EP_QUIRK) { + struct xhci_command *command; + command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "Queueing configure endpoint command"); - xhci_queue_configure_endpoint(xhci, + xhci_queue_configure_endpoint(xhci, command, xhci->devs[slot_id]->in_ctx->dma, slot_id, false); xhci_ring_cmd_db(xhci); @@ -1186,187 +1131,6 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id, } } -/* Complete the command and detele it from the devcie's command queue. - */ -static void xhci_complete_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, - struct xhci_command *command, u32 status) -{ - command->status = status; - list_del(&command->cmd_list); - if (command->completion) - complete(command->completion); - else - xhci_free_command(xhci, command); -} - - -/* Check to see if a command in the device's command queue matches this one. - * Signal the completion or free the command, and return 1. Return 0 if the - * completed command isn't at the head of the command list. - */ -static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci, - struct xhci_virt_device *virt_dev, - struct xhci_event_cmd *event) -{ - struct xhci_command *command; - - if (list_empty(&virt_dev->cmd_list)) - return 0; - - command = list_entry(virt_dev->cmd_list.next, - struct xhci_command, cmd_list); - if (xhci->cmd_ring->dequeue != command->command_trb) - return 0; - - xhci_complete_cmd_in_cmd_wait_list(xhci, command, - GET_COMP_CODE(le32_to_cpu(event->status))); - return 1; -} - -/* - * Finding the command trb need to be cancelled and modifying it to - * NO OP command. And if the command is in device's command wait - * list, finishing and freeing it. - * - * If we can't find the command trb, we think it had already been - * executed. - */ -static void xhci_cmd_to_noop(struct xhci_hcd *xhci, struct xhci_cd *cur_cd) -{ - struct xhci_segment *cur_seg; - union xhci_trb *cmd_trb; - u32 cycle_state; - - if (xhci->cmd_ring->dequeue == xhci->cmd_ring->enqueue) - return; - - /* find the current segment of command ring */ - cur_seg = find_trb_seg(xhci->cmd_ring->first_seg, - xhci->cmd_ring->dequeue, &cycle_state); - - if (!cur_seg) { - xhci_warn(xhci, "Command ring mismatch, dequeue = %p %llx (dma)\n", - xhci->cmd_ring->dequeue, - (unsigned long long) - xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, - xhci->cmd_ring->dequeue)); - xhci_debug_ring(xhci, xhci->cmd_ring); - xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); - return; - } - - /* find the command trb matched by cd from command ring */ - for (cmd_trb = xhci->cmd_ring->dequeue; - cmd_trb != xhci->cmd_ring->enqueue; - next_trb(xhci, xhci->cmd_ring, &cur_seg, &cmd_trb)) { - /* If the trb is link trb, continue */ - if (TRB_TYPE_LINK_LE32(cmd_trb->generic.field[3])) - continue; - - if (cur_cd->cmd_trb == cmd_trb) { - - /* If the command in device's command list, we should - * finish it and free the command structure. - */ - if (cur_cd->command) - xhci_complete_cmd_in_cmd_wait_list(xhci, - cur_cd->command, COMP_CMD_STOP); - - /* get cycle state from the origin command trb */ - cycle_state = le32_to_cpu(cmd_trb->generic.field[3]) - & TRB_CYCLE; - - /* modify the command trb to NO OP command */ - cmd_trb->generic.field[0] = 0; - cmd_trb->generic.field[1] = 0; - cmd_trb->generic.field[2] = 0; - cmd_trb->generic.field[3] = cpu_to_le32( - TRB_TYPE(TRB_CMD_NOOP) | cycle_state); - break; - } - } -} - -static void xhci_cancel_cmd_in_cd_list(struct xhci_hcd *xhci) -{ - struct xhci_cd *cur_cd, *next_cd; - - if (list_empty(&xhci->cancel_cmd_list)) - return; - - list_for_each_entry_safe(cur_cd, next_cd, - &xhci->cancel_cmd_list, cancel_cmd_list) { - xhci_cmd_to_noop(xhci, cur_cd); - list_del(&cur_cd->cancel_cmd_list); - kfree(cur_cd); - } -} - -/* - * traversing the cancel_cmd_list. If the command descriptor according - * to cmd_trb is found, the function free it and return 1, otherwise - * return 0. - */ -static int xhci_search_cmd_trb_in_cd_list(struct xhci_hcd *xhci, - union xhci_trb *cmd_trb) -{ - struct xhci_cd *cur_cd, *next_cd; - - if (list_empty(&xhci->cancel_cmd_list)) - return 0; - - list_for_each_entry_safe(cur_cd, next_cd, - &xhci->cancel_cmd_list, cancel_cmd_list) { - if (cur_cd->cmd_trb == cmd_trb) { - if (cur_cd->command) - xhci_complete_cmd_in_cmd_wait_list(xhci, - cur_cd->command, COMP_CMD_STOP); - list_del(&cur_cd->cancel_cmd_list); - kfree(cur_cd); - return 1; - } - } - - return 0; -} - -/* - * If the cmd_trb_comp_code is COMP_CMD_ABORT, we just check whether the - * trb pointed by the command ring dequeue pointer is the trb we want to - * cancel or not. And if the cmd_trb_comp_code is COMP_CMD_STOP, we will - * traverse the cancel_cmd_list to trun the all of the commands according - * to command descriptor to NO-OP trb. - */ -static int handle_stopped_cmd_ring(struct xhci_hcd *xhci, - int cmd_trb_comp_code) -{ - int cur_trb_is_good = 0; - - /* Searching the cmd trb pointed by the command ring dequeue - * pointer in command descriptor list. If it is found, free it. - */ - cur_trb_is_good = xhci_search_cmd_trb_in_cd_list(xhci, - xhci->cmd_ring->dequeue); - - if (cmd_trb_comp_code == COMP_CMD_ABORT) - xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; - else if (cmd_trb_comp_code == COMP_CMD_STOP) { - /* traversing the cancel_cmd_list and canceling - * the command according to command descriptor - */ - xhci_cancel_cmd_in_cd_list(xhci); - - xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; - /* - * ring command ring doorbell again to restart the - * command ring - */ - if (xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) - xhci_ring_cmd_db(xhci); - } - return cur_trb_is_good; -} - static void xhci_handle_cmd_enable_slot(struct xhci_hcd *xhci, int slot_id, u32 cmd_comp_code) { @@ -1374,7 +1138,6 @@ static void xhci_handle_cmd_enable_slot(struct xhci_hcd *xhci, int slot_id, xhci->slot_id = slot_id; else xhci->slot_id = 0; - complete(&xhci->addr_dev); } static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id) @@ -1399,9 +1162,6 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id, unsigned int ep_state; u32 add_flags, drop_flags; - virt_dev = xhci->devs[slot_id]; - if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event)) - return; /* * Configure endpoint commands can come from the USB core * configuration or alt setting changes, or because the HW @@ -1410,6 +1170,7 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id, * If the command was for a halted endpoint, the xHCI driver * is not waiting on the configure endpoint command. */ + virt_dev = xhci->devs[slot_id]; ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "Could not get input context, bad type.\n"); @@ -1432,7 +1193,7 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id, add_flags - SLOT_FLAG == drop_flags) { ep_state = virt_dev->eps[ep_index].ep_state; if (!(ep_state & EP_HALTED)) - goto bandwidth_change; + return; xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "Completed config ep cmd - " "last ep index = %d, state = %d", @@ -1442,43 +1203,14 @@ static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id, ring_doorbell_for_active_rings(xhci, slot_id, ep_index); return; } -bandwidth_change: - xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, - "Completed config ep cmd"); - virt_dev->cmd_status = cmd_comp_code; - complete(&virt_dev->cmd_completion); return; } -static void xhci_handle_cmd_eval_ctx(struct xhci_hcd *xhci, int slot_id, - struct xhci_event_cmd *event, u32 cmd_comp_code) -{ - struct xhci_virt_device *virt_dev; - - virt_dev = xhci->devs[slot_id]; - if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event)) - return; - virt_dev->cmd_status = cmd_comp_code; - complete(&virt_dev->cmd_completion); -} - -static void xhci_handle_cmd_addr_dev(struct xhci_hcd *xhci, int slot_id, - u32 cmd_comp_code) -{ - xhci->devs[slot_id]->cmd_status = cmd_comp_code; - complete(&xhci->addr_dev); -} - static void xhci_handle_cmd_reset_dev(struct xhci_hcd *xhci, int slot_id, struct xhci_event_cmd *event) { - struct xhci_virt_device *virt_dev; - xhci_dbg(xhci, "Completed reset device command.\n"); - virt_dev = xhci->devs[slot_id]; - if (virt_dev) - handle_cmd_in_cmd_wait_list(xhci, virt_dev, event); - else + if (!xhci->devs[slot_id]) xhci_warn(xhci, "Reset device command completion " "for disabled slot %u\n", slot_id); } @@ -1496,6 +1228,116 @@ static void xhci_handle_cmd_nec_get_fw(struct xhci_hcd *xhci, NEC_FW_MINOR(le32_to_cpu(event->status))); } +static void xhci_complete_del_and_free_cmd(struct xhci_command *cmd, u32 status) +{ + list_del(&cmd->cmd_list); + + if (cmd->completion) { + cmd->status = status; + complete(cmd->completion); + } else { + kfree(cmd); + } +} + +void xhci_cleanup_command_queue(struct xhci_hcd *xhci) +{ + struct xhci_command *cur_cmd, *tmp_cmd; + list_for_each_entry_safe(cur_cmd, tmp_cmd, &xhci->cmd_list, cmd_list) + xhci_complete_del_and_free_cmd(cur_cmd, COMP_CMD_ABORT); +} + +/* + * Turn all commands on command ring with status set to "aborted" to no-op trbs. + * If there are other commands waiting then restart the ring and kick the timer. + * This must be called with command ring stopped and xhci->lock held. + */ +static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci, + struct xhci_command *cur_cmd) +{ + struct xhci_command *i_cmd, *tmp_cmd; + u32 cycle_state; + + /* Turn all aborted commands in list to no-ops, then restart */ + list_for_each_entry_safe(i_cmd, tmp_cmd, &xhci->cmd_list, + cmd_list) { + + if (i_cmd->status != COMP_CMD_ABORT) + continue; + + i_cmd->status = COMP_CMD_STOP; + + xhci_dbg(xhci, "Turn aborted command %p to no-op\n", + i_cmd->command_trb); + /* get cycle state from the original cmd trb */ + cycle_state = le32_to_cpu( + i_cmd->command_trb->generic.field[3]) & TRB_CYCLE; + /* modify the command trb to no-op command */ + i_cmd->command_trb->generic.field[0] = 0; + i_cmd->command_trb->generic.field[1] = 0; + i_cmd->command_trb->generic.field[2] = 0; + i_cmd->command_trb->generic.field[3] = cpu_to_le32( + TRB_TYPE(TRB_CMD_NOOP) | cycle_state); + + /* + * caller waiting for completion is called when command + * completion event is received for these no-op commands + */ + } + + xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; + + /* ring command ring doorbell to restart the command ring */ + if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) && + !(xhci->xhc_state & XHCI_STATE_DYING)) { + xhci->current_cmd = cur_cmd; + mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); + xhci_ring_cmd_db(xhci); + } + return; +} + + +void xhci_handle_command_timeout(unsigned long data) +{ + struct xhci_hcd *xhci; + int ret; + unsigned long flags; + u64 hw_ring_state; + struct xhci_command *cur_cmd = NULL; + xhci = (struct xhci_hcd *) data; + + /* mark this command to be cancelled */ + spin_lock_irqsave(&xhci->lock, flags); + if (xhci->current_cmd) { + cur_cmd = xhci->current_cmd; + cur_cmd->status = COMP_CMD_ABORT; + } + + + /* Make sure command ring is running before aborting it */ + hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) && + (hw_ring_state & CMD_RING_RUNNING)) { + + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "Command timeout\n"); + ret = xhci_abort_cmd_ring(xhci); + if (unlikely(ret == -ESHUTDOWN)) { + xhci_err(xhci, "Abort command ring failed\n"); + xhci_cleanup_command_queue(xhci); + usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); + xhci_dbg(xhci, "xHCI host controller is dead.\n"); + } + return; + } + /* command timeout on stopped ring, ring can't be aborted */ + xhci_dbg(xhci, "Command timeout on stopped ring\n"); + xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd); + spin_unlock_irqrestore(&xhci->lock, flags); + return; +} + static void handle_cmd_completion(struct xhci_hcd *xhci, struct xhci_event_cmd *event) { @@ -1504,6 +1346,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, dma_addr_t cmd_dequeue_dma; u32 cmd_comp_code; union xhci_trb *cmd_trb; + struct xhci_command *cmd; u32 cmd_type; cmd_dma = le64_to_cpu(event->cmd_trb); @@ -1521,26 +1364,35 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, return; } + cmd = list_entry(xhci->cmd_list.next, struct xhci_command, cmd_list); + + if (cmd->command_trb != xhci->cmd_ring->dequeue) { + xhci_err(xhci, + "Command completion event does not match command\n"); + return; + } + + del_timer(&xhci->cmd_timer); + trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event); cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status)); - if (cmd_comp_code == COMP_CMD_ABORT || cmd_comp_code == COMP_CMD_STOP) { - /* If the return value is 0, we think the trb pointed by - * command ring dequeue pointer is a good trb. The good - * trb means we don't want to cancel the trb, but it have - * been stopped by host. So we should handle it normally. - * Otherwise, driver should invoke inc_deq() and return. - */ - if (handle_stopped_cmd_ring(xhci, cmd_comp_code)) { - inc_deq(xhci, xhci->cmd_ring); - return; - } - /* There is no command to handle if we get a stop event when the - * command ring is empty, event->cmd_trb points to the next - * unset command - */ - if (xhci->cmd_ring->dequeue == xhci->cmd_ring->enqueue) - return; + + /* If CMD ring stopped we own the trbs between enqueue and dequeue */ + if (cmd_comp_code == COMP_CMD_STOP) { + xhci_handle_stopped_cmd_ring(xhci, cmd); + return; + } + /* + * Host aborted the command ring, check if the current command was + * supposed to be aborted, otherwise continue normally. + * The command ring is stopped now, but the xHC will issue a Command + * Ring Stopped event which will cause us to restart it. + */ + if (cmd_comp_code == COMP_CMD_ABORT) { + xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; + if (cmd->status == COMP_CMD_ABORT) + goto event_handled; } cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3])); @@ -1552,13 +1404,13 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci_handle_cmd_disable_slot(xhci, slot_id); break; case TRB_CONFIG_EP: - xhci_handle_cmd_config_ep(xhci, slot_id, event, cmd_comp_code); + if (!cmd->completion) + xhci_handle_cmd_config_ep(xhci, slot_id, event, + cmd_comp_code); break; case TRB_EVAL_CONTEXT: - xhci_handle_cmd_eval_ctx(xhci, slot_id, event, cmd_comp_code); break; case TRB_ADDR_DEV: - xhci_handle_cmd_addr_dev(xhci, slot_id, cmd_comp_code); break; case TRB_STOP_RING: WARN_ON(slot_id != TRB_TO_SLOT_ID( @@ -1571,6 +1423,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci_handle_cmd_set_deq(xhci, slot_id, cmd_trb, cmd_comp_code); break; case TRB_CMD_NOOP: + /* Is this an aborted command turned to NO-OP? */ + if (cmd->status == COMP_CMD_STOP) + cmd_comp_code = COMP_CMD_STOP; break; case TRB_RESET_EP: WARN_ON(slot_id != TRB_TO_SLOT_ID( @@ -1578,8 +1433,11 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci_handle_cmd_reset_ep(xhci, slot_id, cmd_trb, cmd_comp_code); break; case TRB_RESET_DEV: - WARN_ON(slot_id != TRB_TO_SLOT_ID( - le32_to_cpu(cmd_trb->generic.field[3]))); + /* SLOT_ID field in reset device cmd completion event TRB is 0. + * Use the SLOT_ID from the command TRB instead (xhci 4.6.11) + */ + slot_id = TRB_TO_SLOT_ID( + le32_to_cpu(cmd_trb->generic.field[3])); xhci_handle_cmd_reset_dev(xhci, slot_id, event); break; case TRB_NEC_GET_FW: @@ -1590,6 +1448,17 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci->error_bitmask |= 1 << 6; break; } + + /* restart timer if this wasn't the last command */ + if (cmd->cmd_list.next != &xhci->cmd_list) { + xhci->current_cmd = list_entry(cmd->cmd_list.next, + struct xhci_command, cmd_list); + mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); + } + +event_handled: + xhci_complete_del_and_free_cmd(cmd, cmd_comp_code); + inc_deq(xhci, xhci->cmd_ring); } @@ -1905,16 +1774,19 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci, struct xhci_td *td, union xhci_trb *event_trb) { struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index]; + struct xhci_command *command; + command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); + if (!command) + return; + ep->ep_state |= EP_HALTED; ep->stopped_td = td; - ep->stopped_trb = event_trb; ep->stopped_stream = stream_id; - xhci_queue_reset_ep(xhci, slot_id, ep_index); + xhci_queue_reset_ep(xhci, command, slot_id, ep_index); xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index); ep->stopped_td = NULL; - ep->stopped_trb = NULL; ep->stopped_stream = 0; xhci_ring_cmd_db(xhci); @@ -1996,7 +1868,6 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, * the ring dequeue pointer or take this TD off any lists yet. */ ep->stopped_td = td; - ep->stopped_trb = event_trb; return 0; } else { if (trb_comp_code == COMP_STALL) { @@ -2008,7 +1879,6 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, * USB class driver clear the stall later. */ ep->stopped_td = td; - ep->stopped_trb = event_trb; ep->stopped_stream = ep_ring->stream_id; } else if (xhci_requires_manual_halt_cleanup(xhci, ep_ctx, trb_comp_code)) { @@ -2625,7 +2495,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, * successful event after a short transfer. * Ignore it. */ - if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) && + if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) && ep_ring->last_td_was_short) { ep_ring->last_td_was_short = false; ret = 0; @@ -2864,8 +2734,9 @@ hw_died: /* Clear the event handler busy flag (RW1C); * the event ring should be empty. */ - temp_64 = readq(&xhci->ir_set->erst_dequeue); - writeq(temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue); + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + xhci_write_64(xhci, temp_64 | ERST_EHB, + &xhci->ir_set->erst_dequeue); spin_unlock(&xhci->lock); return IRQ_HANDLED; @@ -2877,7 +2748,7 @@ hw_died: */ while (xhci_handle_event(xhci) > 0) {} - temp_64 = readq(&xhci->ir_set->erst_dequeue); + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); /* If necessary, update the HW's version of the event ring deq ptr. */ if (event_ring_deq != xhci->event_ring->dequeue) { deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, @@ -2892,7 +2763,7 @@ hw_died: /* Clear the event handler busy flag (RW1C); event ring is empty. */ temp_64 |= ERST_EHB; - writeq(temp_64, &xhci->ir_set->erst_dequeue); + xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue); spin_unlock(&xhci->lock); @@ -2965,58 +2836,8 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, } while (1) { - if (room_on_ring(xhci, ep_ring, num_trbs)) { - union xhci_trb *trb = ep_ring->enqueue; - unsigned int usable = ep_ring->enq_seg->trbs + - TRBS_PER_SEGMENT - 1 - trb; - u32 nop_cmd; - - /* - * Section 4.11.7.1 TD Fragments states that a link - * TRB must only occur at the boundary between - * data bursts (eg 512 bytes for 480M). - * While it is possible to split a large fragment - * we don't know the size yet. - * Simplest solution is to fill the trb before the - * LINK with nop commands. - */ - if (num_trbs == 1 || num_trbs <= usable || usable == 0) - break; - - if (ep_ring->type != TYPE_BULK) - /* - * While isoc transfers might have a buffer that - * crosses a 64k boundary it is unlikely. - * Since we can't add NOPs without generating - * gaps in the traffic just hope it never - * happens at the end of the ring. - * This could be fixed by writing a LINK TRB - * instead of the first NOP - however the - * TRB_TYPE_LINK_LE32() calls would all need - * changing to check the ring length. - */ - break; - - if (num_trbs >= TRBS_PER_SEGMENT) { - xhci_err(xhci, "Too many fragments %d, max %d\n", - num_trbs, TRBS_PER_SEGMENT - 1); - return -EINVAL; - } - - nop_cmd = cpu_to_le32(TRB_TYPE(TRB_TR_NOOP) | - ep_ring->cycle_state); - ep_ring->num_trbs_free -= usable; - do { - trb->generic.field[0] = 0; - trb->generic.field[1] = 0; - trb->generic.field[2] = 0; - trb->generic.field[3] = nop_cmd; - trb++; - } while (--usable); - ep_ring->enqueue = trb; - if (room_on_ring(xhci, ep_ring, num_trbs)) - break; - } + if (room_on_ring(xhci, ep_ring, num_trbs)) + break; if (ep_ring == xhci->cmd_ring) { xhci_err(xhci, "Do not support expand command ring\n"); @@ -3716,7 +3537,7 @@ static unsigned int xhci_get_burst_count(struct xhci_hcd *xhci, return 0; max_burst = urb->ep->ss_ep_comp.bMaxBurst; - return roundup(total_packet_count, max_burst + 1) - 1; + return DIV_ROUND_UP(total_packet_count, max_burst + 1) - 1; } /* @@ -4016,11 +3837,14 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB * because the command event handler may want to resubmit a failed command. */ -static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, - u32 field3, u32 field4, bool command_must_succeed) +static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd, + u32 field1, u32 field2, + u32 field3, u32 field4, bool command_must_succeed) { int reserved_trbs = xhci->cmd_ring_reserved_trbs; int ret; + if (xhci->xhc_state & XHCI_STATE_DYING) + return -ESHUTDOWN; if (!command_must_succeed) reserved_trbs++; @@ -4034,57 +3858,71 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, "unfailable commands failed.\n"); return ret; } + + cmd->command_trb = xhci->cmd_ring->enqueue; + list_add_tail(&cmd->cmd_list, &xhci->cmd_list); + + /* if there are no other commands queued we start the timeout timer */ + if (xhci->cmd_list.next == &cmd->cmd_list && + !timer_pending(&xhci->cmd_timer)) { + xhci->current_cmd = cmd; + mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); + } + queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, field4 | xhci->cmd_ring->cycle_state); return 0; } /* Queue a slot enable or disable request on the command ring */ -int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id) +int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd, + u32 trb_type, u32 slot_id) { - return queue_command(xhci, 0, 0, 0, + return queue_command(xhci, cmd, 0, 0, 0, TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false); } /* Queue an address device command TRB */ -int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - u32 slot_id, enum xhci_setup_dev setup) +int xhci_queue_address_device(struct xhci_hcd *xhci, struct xhci_command *cmd, + dma_addr_t in_ctx_ptr, u32 slot_id, enum xhci_setup_dev setup) { - return queue_command(xhci, lower_32_bits(in_ctx_ptr), + return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr), upper_32_bits(in_ctx_ptr), 0, TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id) | (setup == SETUP_CONTEXT_ONLY ? TRB_BSR : 0), false); } -int xhci_queue_vendor_command(struct xhci_hcd *xhci, +int xhci_queue_vendor_command(struct xhci_hcd *xhci, struct xhci_command *cmd, u32 field1, u32 field2, u32 field3, u32 field4) { - return queue_command(xhci, field1, field2, field3, field4, false); + return queue_command(xhci, cmd, field1, field2, field3, field4, false); } /* Queue a reset device command TRB */ -int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id) +int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd, + u32 slot_id) { - return queue_command(xhci, 0, 0, 0, + return queue_command(xhci, cmd, 0, 0, 0, TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id), false); } /* Queue a configure endpoint command TRB */ -int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, +int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, + struct xhci_command *cmd, dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed) { - return queue_command(xhci, lower_32_bits(in_ctx_ptr), + return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr), upper_32_bits(in_ctx_ptr), 0, TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id), command_must_succeed); } /* Queue an evaluate context command TRB */ -int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - u32 slot_id, bool command_must_succeed) +int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd, + dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed) { - return queue_command(xhci, lower_32_bits(in_ctx_ptr), + return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr), upper_32_bits(in_ctx_ptr), 0, TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id), command_must_succeed); @@ -4094,30 +3932,32 @@ int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop * activity on an endpoint that is about to be suspended. */ -int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id, - unsigned int ep_index, int suspend) +int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd, + int slot_id, unsigned int ep_index, int suspend) { u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id); u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); u32 type = TRB_TYPE(TRB_STOP_RING); u32 trb_suspend = SUSPEND_PORT_FOR_TRB(suspend); - return queue_command(xhci, 0, 0, 0, + return queue_command(xhci, cmd, 0, 0, 0, trb_slot_id | trb_ep_index | type | trb_suspend, false); } /* Set Transfer Ring Dequeue Pointer command. * This should not be used for endpoints that have streams enabled. */ -static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, - unsigned int ep_index, unsigned int stream_id, - struct xhci_segment *deq_seg, - union xhci_trb *deq_ptr, u32 cycle_state) +static int queue_set_tr_deq(struct xhci_hcd *xhci, struct xhci_command *cmd, + int slot_id, + unsigned int ep_index, unsigned int stream_id, + struct xhci_segment *deq_seg, + union xhci_trb *deq_ptr, u32 cycle_state) { dma_addr_t addr; u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id); u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id); + u32 trb_sct = 0; u32 type = TRB_TYPE(TRB_SET_DEQ); struct xhci_virt_ep *ep; @@ -4136,18 +3976,21 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, } ep->queued_deq_seg = deq_seg; ep->queued_deq_ptr = deq_ptr; - return queue_command(xhci, lower_32_bits(addr) | cycle_state, + if (stream_id) + trb_sct = SCT_FOR_TRB(SCT_PRI_TR); + return queue_command(xhci, cmd, + lower_32_bits(addr) | trb_sct | cycle_state, upper_32_bits(addr), trb_stream_id, trb_slot_id | trb_ep_index | type, false); } -int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, - unsigned int ep_index) +int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd, + int slot_id, unsigned int ep_index) { u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id); u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); u32 type = TRB_TYPE(TRB_RESET_EP); - return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type, - false); + return queue_command(xhci, cmd, 0, 0, 0, + trb_slot_id | trb_ep_index | type, false); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index ad364394885..7436d5f5e67 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -291,7 +291,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci) xhci->msix_entries[i].vector = 0; } - ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count); + ret = pci_enable_msix_exact(pdev, xhci->msix_entries, xhci->msix_count); if (ret) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Failed to enable MSI-X"); @@ -390,6 +390,10 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) } legacy_irq: + if (!strlen(hcd->irq_descr)) + snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", + hcd->driver->description, hcd->self.busnum); + /* fall back to legacy interrupt*/ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, hcd->irq_descr, hcd); @@ -404,16 +408,16 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) #else -static int xhci_try_enable_msi(struct usb_hcd *hcd) +static inline int xhci_try_enable_msi(struct usb_hcd *hcd) { return 0; } -static void xhci_cleanup_msix(struct xhci_hcd *xhci) +static inline void xhci_cleanup_msix(struct xhci_hcd *xhci) { } -static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) +static inline void xhci_msix_sync_irqs(struct xhci_hcd *xhci) { } @@ -611,7 +615,7 @@ int xhci_run(struct usb_hcd *hcd) xhci_dbg(xhci, "Event ring:\n"); xhci_debug_ring(xhci, xhci->event_ring); xhci_dbg_ring_ptrs(xhci, xhci->event_ring); - temp_64 = readq(&xhci->ir_set->erst_dequeue); + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); temp_64 &= ~ERST_PTR_MASK; xhci_dbg_trace(xhci, trace_xhci_dbg_init, "ERST deq = 64'h%0lx", (long unsigned int) temp_64); @@ -637,10 +641,14 @@ int xhci_run(struct usb_hcd *hcd) writel(ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending); xhci_print_ir_set(xhci, 0); - if (xhci->quirks & XHCI_NEC_HOST) - xhci_queue_vendor_command(xhci, 0, 0, 0, + if (xhci->quirks & XHCI_NEC_HOST) { + struct xhci_command *command; + command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); + if (!command) + return -ENOMEM; + xhci_queue_vendor_command(xhci, command, 0, 0, 0, TRB_TYPE(TRB_NEC_GET_FW)); - + } xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_run for USB2 roothub"); return 0; @@ -756,11 +764,11 @@ static void xhci_save_registers(struct xhci_hcd *xhci) { xhci->s3.command = readl(&xhci->op_regs->command); xhci->s3.dev_nt = readl(&xhci->op_regs->dev_notification); - xhci->s3.dcbaa_ptr = readq(&xhci->op_regs->dcbaa_ptr); + xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); xhci->s3.config_reg = readl(&xhci->op_regs->config_reg); xhci->s3.erst_size = readl(&xhci->ir_set->erst_size); - xhci->s3.erst_base = readq(&xhci->ir_set->erst_base); - xhci->s3.erst_dequeue = readq(&xhci->ir_set->erst_dequeue); + xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base); + xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); xhci->s3.irq_pending = readl(&xhci->ir_set->irq_pending); xhci->s3.irq_control = readl(&xhci->ir_set->irq_control); } @@ -769,11 +777,11 @@ static void xhci_restore_registers(struct xhci_hcd *xhci) { writel(xhci->s3.command, &xhci->op_regs->command); writel(xhci->s3.dev_nt, &xhci->op_regs->dev_notification); - writeq(xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr); + xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr); writel(xhci->s3.config_reg, &xhci->op_regs->config_reg); writel(xhci->s3.erst_size, &xhci->ir_set->erst_size); - writeq(xhci->s3.erst_base, &xhci->ir_set->erst_base); - writeq(xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue); + xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base); + xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue); writel(xhci->s3.irq_pending, &xhci->ir_set->irq_pending); writel(xhci->s3.irq_control, &xhci->ir_set->irq_control); } @@ -783,7 +791,7 @@ static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) u64 val_64; /* step 2: initialize command ring buffer */ - val_64 = readq(&xhci->op_regs->cmd_ring); + val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, xhci->cmd_ring->dequeue) & @@ -792,7 +800,7 @@ static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Setting command ring address to 0x%llx", (long unsigned long) val_64); - writeq(val_64, &xhci->op_regs->cmd_ring); + xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); } /* @@ -928,7 +936,7 @@ int xhci_suspend(struct xhci_hcd *xhci) */ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) { - u32 command, temp = 0; + u32 command, temp = 0, status; struct usb_hcd *hcd = xhci_to_hcd(xhci); struct usb_hcd *secondary_hcd; int retval = 0; @@ -1046,8 +1054,12 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) done: if (retval == 0) { - usb_hcd_resume_root_hub(hcd); - usb_hcd_resume_root_hub(xhci->shared_hcd); + /* Resume root hubs only when have pending events. */ + status = readl(&xhci->op_regs->status); + if (status & STS_EINT) { + usb_hcd_resume_root_hub(hcd); + usb_hcd_resume_root_hub(xhci->shared_hcd); + } } /* @@ -1183,10 +1195,10 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct urb *urb) { - struct xhci_container_ctx *in_ctx; struct xhci_container_ctx *out_ctx; struct xhci_input_control_ctx *ctrl_ctx; struct xhci_ep_ctx *ep_ctx; + struct xhci_command *command; int max_packet_size; int hw_max_packet_size; int ret = 0; @@ -1211,18 +1223,24 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, /* FIXME: This won't work if a non-default control endpoint * changes max packet sizes. */ - in_ctx = xhci->devs[slot_id]->in_ctx; - ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + + command = xhci_alloc_command(xhci, false, true, GFP_KERNEL); + if (!command) + return -ENOMEM; + + command->in_ctx = xhci->devs[slot_id]->in_ctx; + ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); - return -ENOMEM; + ret = -ENOMEM; + goto command_cleanup; } /* Set up the modified control endpoint 0 */ xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx, xhci->devs[slot_id]->out_ctx, ep_index); - ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); + ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index); ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK); ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size)); @@ -1230,17 +1248,20 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, ctrl_ctx->drop_flags = 0; xhci_dbg(xhci, "Slot %d input context\n", slot_id); - xhci_dbg_ctx(xhci, in_ctx, ep_index); + xhci_dbg_ctx(xhci, command->in_ctx, ep_index); xhci_dbg(xhci, "Slot %d output context\n", slot_id); xhci_dbg_ctx(xhci, out_ctx, ep_index); - ret = xhci_configure_endpoint(xhci, urb->dev, NULL, + ret = xhci_configure_endpoint(xhci, urb->dev, command, true, false); /* Clean up the input context for later use by bandwidth * functions. */ ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG); +command_cleanup: + kfree(command->completion); + kfree(command); } return ret; } @@ -1461,6 +1482,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) unsigned int ep_index; struct xhci_ring *ep_ring; struct xhci_virt_ep *ep; + struct xhci_command *command; xhci = hcd_to_xhci(hcd); spin_lock_irqsave(&xhci->lock, flags); @@ -1530,12 +1552,14 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) * the first cancellation to be handled. */ if (!(ep->ep_state & EP_HALT_PENDING)) { + command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); ep->ep_state |= EP_HALT_PENDING; ep->stop_cmds_pending++; ep->stop_cmd_timer.expires = jiffies + XHCI_STOP_EP_CMD_TIMEOUT * HZ; add_timer(&ep->stop_cmd_timer); - xhci_queue_stop_endpoint(xhci, urb->dev->slot_id, ep_index, 0); + xhci_queue_stop_endpoint(xhci, command, urb->dev->slot_id, + ep_index, 0); xhci_ring_cmd_db(xhci); } done: @@ -1800,6 +1824,11 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci, int ret; switch (*cmd_status) { + case COMP_CMD_ABORT: + case COMP_CMD_STOP: + xhci_warn(xhci, "Timeout while waiting for configure endpoint command\n"); + ret = -ETIME; + break; case COMP_ENOMEM: dev_warn(&udev->dev, "Not enough host controller resources " "for new device state.\n"); @@ -1846,6 +1875,11 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id]; switch (*cmd_status) { + case COMP_CMD_ABORT: + case COMP_CMD_STOP: + xhci_warn(xhci, "Timeout while waiting for evaluate context command\n"); + ret = -ETIME; + break; case COMP_EINVAL: dev_warn(&udev->dev, "WARN: xHCI driver setup invalid evaluate " "context command.\n"); @@ -2570,23 +2604,17 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, bool ctx_change, bool must_succeed) { int ret; - int timeleft; unsigned long flags; - struct xhci_container_ctx *in_ctx; struct xhci_input_control_ctx *ctrl_ctx; - struct completion *cmd_completion; - u32 *cmd_status; struct xhci_virt_device *virt_dev; - union xhci_trb *cmd_trb; + + if (!command) + return -EINVAL; spin_lock_irqsave(&xhci->lock, flags); virt_dev = xhci->devs[udev->slot_id]; - if (command) - in_ctx = command->in_ctx; - else - in_ctx = virt_dev->in_ctx; - ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); if (!ctrl_ctx) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_warn(xhci, "%s: Could not get input context, bad type.\n", @@ -2603,7 +2631,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, return -ENOMEM; } if ((xhci->quirks & XHCI_SW_BW_CHECKING) && - xhci_reserve_bandwidth(xhci, virt_dev, in_ctx)) { + xhci_reserve_bandwidth(xhci, virt_dev, command->in_ctx)) { if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) xhci_free_host_resources(xhci, ctrl_ctx); spin_unlock_irqrestore(&xhci->lock, flags); @@ -2611,27 +2639,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, return -ENOMEM; } - if (command) { - cmd_completion = command->completion; - cmd_status = &command->status; - command->command_trb = xhci_find_next_enqueue(xhci->cmd_ring); - list_add_tail(&command->cmd_list, &virt_dev->cmd_list); - } else { - cmd_completion = &virt_dev->cmd_completion; - cmd_status = &virt_dev->cmd_status; - } - init_completion(cmd_completion); - - cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring); if (!ctx_change) - ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma, + ret = xhci_queue_configure_endpoint(xhci, command, + command->in_ctx->dma, udev->slot_id, must_succeed); else - ret = xhci_queue_evaluate_context(xhci, in_ctx->dma, + ret = xhci_queue_evaluate_context(xhci, command, + command->in_ctx->dma, udev->slot_id, must_succeed); if (ret < 0) { - if (command) - list_del(&command->cmd_list); if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) xhci_free_host_resources(xhci, ctrl_ctx); spin_unlock_irqrestore(&xhci->lock, flags); @@ -2643,26 +2659,14 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, spin_unlock_irqrestore(&xhci->lock, flags); /* Wait for the configure endpoint command to complete */ - timeleft = wait_for_completion_interruptible_timeout( - cmd_completion, - XHCI_CMD_DEFAULT_TIMEOUT); - if (timeleft <= 0) { - xhci_warn(xhci, "%s while waiting for %s command\n", - timeleft == 0 ? "Timeout" : "Signal", - ctx_change == 0 ? - "configure endpoint" : - "evaluate context"); - /* cancel the configure endpoint command */ - ret = xhci_cancel_cmd(xhci, command, cmd_trb); - if (ret < 0) - return ret; - return -ETIME; - } + wait_for_completion(command->completion); if (!ctx_change) - ret = xhci_configure_endpoint_result(xhci, udev, cmd_status); + ret = xhci_configure_endpoint_result(xhci, udev, + &command->status); else - ret = xhci_evaluate_context_result(xhci, udev, cmd_status); + ret = xhci_evaluate_context_result(xhci, udev, + &command->status); if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) { spin_lock_irqsave(&xhci->lock, flags); @@ -2678,6 +2682,20 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, return ret; } +static void xhci_check_bw_drop_ep_streams(struct xhci_hcd *xhci, + struct xhci_virt_device *vdev, int i) +{ + struct xhci_virt_ep *ep = &vdev->eps[i]; + + if (ep->ep_state & EP_HAS_STREAMS) { + xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on set_interface, freeing streams.\n", + xhci_get_endpoint_address(i)); + xhci_free_stream_info(xhci, ep->stream_info); + ep->stream_info = NULL; + ep->ep_state &= ~EP_HAS_STREAMS; + } +} + /* Called after one or more calls to xhci_add_endpoint() or * xhci_drop_endpoint(). If this call fails, the USB core is expected * to call xhci_reset_bandwidth(). @@ -2696,6 +2714,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_virt_device *virt_dev; struct xhci_input_control_ctx *ctrl_ctx; struct xhci_slot_ctx *slot_ctx; + struct xhci_command *command; ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__); if (ret <= 0) @@ -2707,12 +2726,19 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); virt_dev = xhci->devs[udev->slot_id]; + command = xhci_alloc_command(xhci, false, true, GFP_KERNEL); + if (!command) + return -ENOMEM; + + command->in_ctx = virt_dev->in_ctx; + /* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */ - ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); - return -ENOMEM; + ret = -ENOMEM; + goto command_cleanup; } ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG); @@ -2720,20 +2746,20 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) /* Don't issue the command if there's no endpoints to update. */ if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) && - ctrl_ctx->drop_flags == 0) - return 0; - + ctrl_ctx->drop_flags == 0) { + ret = 0; + goto command_cleanup; + } xhci_dbg(xhci, "New Input Control Context:\n"); slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); xhci_dbg_ctx(xhci, virt_dev->in_ctx, LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info))); - ret = xhci_configure_endpoint(xhci, udev, NULL, + ret = xhci_configure_endpoint(xhci, udev, command, false, false); - if (ret) { + if (ret) /* Callee should call reset_bandwidth() */ - return ret; - } + goto command_cleanup; xhci_dbg(xhci, "Output context after successful config ep cmd:\n"); xhci_dbg_ctx(xhci, virt_dev->out_ctx, @@ -2742,8 +2768,10 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) /* Free any rings that were dropped, but not changed. */ for (i = 1; i < 31; ++i) { if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) && - !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))) + !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))) { xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); + xhci_check_bw_drop_ep_streams(xhci, virt_dev, i); + } } xhci_zero_in_ctx(xhci, virt_dev); /* @@ -2759,9 +2787,13 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) if (virt_dev->eps[i].ring) { xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); } + xhci_check_bw_drop_ep_streams(xhci, virt_dev, i); virt_dev->eps[i].ring = virt_dev->eps[i].new_ring; virt_dev->eps[i].new_ring = NULL; } +command_cleanup: + kfree(command->completion); + kfree(command); return ret; } @@ -2863,9 +2895,14 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, * issue a configure endpoint command later. */ if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) { + struct xhci_command *command; + /* Can't sleep if we're called from cleanup_halted_endpoint() */ + command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); + if (!command) + return; xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, "Queueing new dequeue state"); - xhci_queue_new_dequeue_state(xhci, udev->slot_id, + xhci_queue_new_dequeue_state(xhci, command, udev->slot_id, ep_index, ep->stopped_stream, &deq_state); } else { /* Better hope no one uses the input context between now and the @@ -2896,6 +2933,7 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, unsigned long flags; int ret; struct xhci_virt_ep *virt_ep; + struct xhci_command *command; xhci = hcd_to_xhci(hcd); udev = (struct usb_device *) ep->hcpriv; @@ -2918,10 +2956,14 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, return; } + command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); + if (!command) + return; + xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, "Queueing reset endpoint command"); spin_lock_irqsave(&xhci->lock, flags); - ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index); + ret = xhci_queue_reset_ep(xhci, command, udev->slot_id, ep_index); /* * Can't change the ring dequeue pointer until it's transitioned to the * stopped state, which is only upon a successful reset endpoint @@ -2933,7 +2975,6 @@ void xhci_endpoint_reset(struct usb_hcd *hcd, xhci_ring_cmd_db(xhci); } virt_ep->stopped_td = NULL; - virt_ep->stopped_trb = NULL; virt_ep->stopped_stream = 0; spin_unlock_irqrestore(&xhci->lock, flags); @@ -2954,7 +2995,7 @@ static int xhci_check_streams_endpoint(struct xhci_hcd *xhci, ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, true, __func__); if (ret <= 0) return -EINVAL; - if (ep->ss_ep_comp.bmAttributes == 0) { + if (usb_ss_max_streams(&ep->ss_ep_comp) == 0) { xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion" " descriptor for ep 0x%x does not support streams\n", ep->desc.bEndpointAddress); @@ -3121,6 +3162,12 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n", num_streams); + /* MaxPSASize value 0 (2 streams) means streams are not supported */ + if (HCC_MAX_PSA(xhci->hcc_params) < 4) { + xhci_dbg(xhci, "xHCI controller does not support streams.\n"); + return -ENOSYS; + } + config_cmd = xhci_alloc_command(xhci, true, true, mem_flags); if (!config_cmd) { xhci_dbg(xhci, "Could not allocate xHCI command structure.\n"); @@ -3390,7 +3437,6 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) unsigned int slot_id; struct xhci_virt_device *virt_dev; struct xhci_command *reset_device_cmd; - int timeleft; int last_freed_endpoint; struct xhci_slot_ctx *slot_ctx; int old_active_eps = 0; @@ -3447,13 +3493,10 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) /* Attempt to submit the Reset Device command to the command ring */ spin_lock_irqsave(&xhci->lock, flags); - reset_device_cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring); - list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list); - ret = xhci_queue_reset_device(xhci, slot_id); + ret = xhci_queue_reset_device(xhci, reset_device_cmd, slot_id); if (ret) { xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); - list_del(&reset_device_cmd->cmd_list); spin_unlock_irqrestore(&xhci->lock, flags); goto command_cleanup; } @@ -3461,22 +3504,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) spin_unlock_irqrestore(&xhci->lock, flags); /* Wait for the Reset Device command to finish */ - timeleft = wait_for_completion_interruptible_timeout( - reset_device_cmd->completion, - XHCI_CMD_DEFAULT_TIMEOUT); - if (timeleft <= 0) { - xhci_warn(xhci, "%s while waiting for reset device command\n", - timeleft == 0 ? "Timeout" : "Signal"); - spin_lock_irqsave(&xhci->lock, flags); - /* The timeout might have raced with the event ring handler, so - * only delete from the list if the item isn't poisoned. - */ - if (reset_device_cmd->cmd_list.next != LIST_POISON1) - list_del(&reset_device_cmd->cmd_list); - spin_unlock_irqrestore(&xhci->lock, flags); - ret = -ETIME; - goto command_cleanup; - } + wait_for_completion(reset_device_cmd->completion); /* The Reset Device command can't fail, according to the 0.95/0.96 spec, * unless we tried to reset a slot ID that wasn't enabled, @@ -3484,6 +3512,11 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) */ ret = reset_device_cmd->status; switch (ret) { + case COMP_CMD_ABORT: + case COMP_CMD_STOP: + xhci_warn(xhci, "Timeout waiting for reset device command\n"); + ret = -ETIME; + goto command_cleanup; case COMP_EBADSLT: /* 0.95 completion code for bad slot ID */ case COMP_CTX_STATE: /* 0.96 completion code for same thing */ xhci_dbg(xhci, "Can't reset device (slot ID %u) in %s state\n", @@ -3519,6 +3552,8 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_virt_ep *ep = &virt_dev->eps[i]; if (ep->ep_state & EP_HAS_STREAMS) { + xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on device reset, freeing streams.\n", + xhci_get_endpoint_address(i)); xhci_free_stream_info(xhci, ep->stream_info); ep->stream_info = NULL; ep->ep_state &= ~EP_HAS_STREAMS; @@ -3561,6 +3596,11 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) unsigned long flags; u32 state; int i, ret; + struct xhci_command *command; + + command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); + if (!command) + return; #ifndef CONFIG_USB_DEFAULT_PERSIST /* @@ -3576,8 +3616,10 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) /* If the host is halted due to driver unload, we still need to free the * device. */ - if (ret <= 0 && ret != -ENODEV) + if (ret <= 0 && ret != -ENODEV) { + kfree(command); return; + } virt_dev = xhci->devs[udev->slot_id]; @@ -3594,16 +3636,19 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) (xhci->xhc_state & XHCI_STATE_HALTED)) { xhci_free_virt_device(xhci, udev->slot_id); spin_unlock_irqrestore(&xhci->lock, flags); + kfree(command); return; } - if (xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) { + if (xhci_queue_slot_control(xhci, command, TRB_DISABLE_SLOT, + udev->slot_id)) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); return; } xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); + /* * Event command completion handler will free any data structures * associated with the slot. XXX Can free sleep? @@ -3641,33 +3686,33 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); unsigned long flags; - int timeleft; int ret; - union xhci_trb *cmd_trb; + struct xhci_command *command; + + command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); + if (!command) + return 0; spin_lock_irqsave(&xhci->lock, flags); - cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring); - ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0); + command->completion = &xhci->addr_dev; + ret = xhci_queue_slot_control(xhci, command, TRB_ENABLE_SLOT, 0); if (ret) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); + kfree(command); return 0; } xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); - /* XXX: how much time for xHC slot assignment? */ - timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev, - XHCI_CMD_DEFAULT_TIMEOUT); - if (timeleft <= 0) { - xhci_warn(xhci, "%s while waiting for a slot\n", - timeleft == 0 ? "Timeout" : "Signal"); - /* cancel the enable slot request */ - return xhci_cancel_cmd(xhci, NULL, cmd_trb); - } + wait_for_completion(command->completion); - if (!xhci->slot_id) { + if (!xhci->slot_id || command->status != COMP_SUCCESS) { xhci_err(xhci, "Error while assigning device slot ID\n"); + xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n", + HCS_MAX_SLOTS( + readl(&xhci->cap_regs->hcs_params1))); + kfree(command); return 0; } @@ -3702,6 +3747,8 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) pm_runtime_get_noresume(hcd->self.controller); #endif + + kfree(command); /* Is this a LS or FS device under a HS hub? */ /* Hub or peripherial? */ return 1; @@ -3709,7 +3756,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) disable_slot: /* Disable slot, if we can do it without mem alloc */ spin_lock_irqsave(&xhci->lock, flags); - if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) + command->completion = NULL; + command->status = 0; + if (!xhci_queue_slot_control(xhci, command, TRB_DISABLE_SLOT, + udev->slot_id)) xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); return 0; @@ -3726,14 +3776,13 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, { const char *act = setup == SETUP_CONTEXT_ONLY ? "context" : "address"; unsigned long flags; - int timeleft; struct xhci_virt_device *virt_dev; int ret = 0; struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct xhci_slot_ctx *slot_ctx; struct xhci_input_control_ctx *ctrl_ctx; u64 temp_64; - union xhci_trb *cmd_trb; + struct xhci_command *command; if (!udev->slot_id) { xhci_dbg_trace(xhci, trace_xhci_dbg_address, @@ -3754,11 +3803,19 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, return -EINVAL; } + command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); + if (!command) + return -ENOMEM; + + command->in_ctx = virt_dev->in_ctx; + command->completion = &xhci->addr_dev; + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); if (!ctrl_ctx) { xhci_warn(xhci, "%s: Could not get input context, bad type.\n", __func__); + kfree(command); return -EINVAL; } /* @@ -3780,36 +3837,31 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, le32_to_cpu(slot_ctx->dev_info) >> 27); spin_lock_irqsave(&xhci->lock, flags); - cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring); - ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma, + ret = xhci_queue_address_device(xhci, command, virt_dev->in_ctx->dma, udev->slot_id, setup); if (ret) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg_trace(xhci, trace_xhci_dbg_address, "FIXME: allocate a command ring segment"); + kfree(command); return ret; } xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); /* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */ - timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev, - XHCI_CMD_DEFAULT_TIMEOUT); + wait_for_completion(command->completion); + /* FIXME: From section 4.3.4: "Software shall be responsible for timing * the SetAddress() "recovery interval" required by USB and aborting the * command on a timeout. */ - if (timeleft <= 0) { - xhci_warn(xhci, "%s while waiting for setup %s command\n", - timeleft == 0 ? "Timeout" : "Signal", act); - /* cancel the address device command */ - ret = xhci_cancel_cmd(xhci, NULL, cmd_trb); - if (ret < 0) - return ret; - return -ETIME; - } - - switch (virt_dev->cmd_status) { + switch (command->status) { + case COMP_CMD_ABORT: + case COMP_CMD_STOP: + xhci_warn(xhci, "Timeout while waiting for setup device command\n"); + ret = -ETIME; + break; case COMP_CTX_STATE: case COMP_EBADSLT: xhci_err(xhci, "Setup ERROR: setup %s command for slot %d.\n", @@ -3832,7 +3884,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, default: xhci_err(xhci, "ERROR: unexpected setup %s command completion code 0x%x.\n", - act, virt_dev->cmd_status); + act, command->status); xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id); xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2); trace_xhci_address_ctx(xhci, virt_dev->out_ctx, 1); @@ -3840,9 +3892,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, break; } if (ret) { + kfree(command); return ret; } - temp_64 = readq(&xhci->op_regs->dcbaa_ptr); + temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); xhci_dbg_trace(xhci, trace_xhci_dbg_address, "Op regs DCBAA ptr = %#016llx", temp_64); xhci_dbg_trace(xhci, trace_xhci_dbg_address, @@ -3874,7 +3927,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, xhci_dbg_trace(xhci, trace_xhci_dbg_address, "Internal device address = %d", le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK); - + kfree(command); return 0; } @@ -4064,7 +4117,7 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", - enable ? "enable" : "disable", port_num); + enable ? "enable" : "disable", port_num + 1); if (enable) { /* Host supports BESL timeout instead of HIRD */ @@ -4730,8 +4783,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) struct device *dev = hcd->self.controller; int retval; - /* Limit the block layer scatter-gather lists to half a segment. */ - hcd->self.sg_tablesize = TRBS_PER_SEGMENT / 2; + /* Accept arbitrarily long scatter-gather lists */ + hcd->self.sg_tablesize = ~0; /* support to build packet from discontinuous buffers */ hcd->self.no_sg_constraint = 1; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index f8416639bf3..9ffecd56600 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -28,17 +28,6 @@ #include <linux/kernel.h> #include <linux/usb/hcd.h> -/* - * Registers should always be accessed with double word or quad word accesses. - * - * Some xHCI implementations may support 64-bit address pointers. Registers - * with 64-bit address pointers should be written to with dword accesses by - * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second. - * xHCI implementations that do not support 64-bit address pointers will ignore - * the high dword, and write order is irrelevant. - */ -#include <asm-generic/io-64-nonatomic-lo-hi.h> - /* Code sharing between pci-quirks and xhci hcd */ #include "xhci-ext-caps.h" #include "pci-quirks.h" @@ -714,6 +703,7 @@ struct xhci_ep_ctx { /* deq bitmasks */ #define EP_CTX_CYCLE_MASK (1 << 0) +#define SCTX_DEQ_MASK (~0xfL) /** @@ -875,8 +865,6 @@ struct xhci_virt_ep { #define EP_GETTING_NO_STREAMS (1 << 5) /* ---- Related to URB cancellation ---- */ struct list_head cancelled_td_list; - /* The TRB that was last reported in a stopped endpoint ring */ - union xhci_trb *stopped_trb; struct xhci_td *stopped_td; unsigned int stopped_stream; /* Watchdog timer for stop endpoint command to cancel URBs */ @@ -949,9 +937,6 @@ struct xhci_virt_device { #define XHCI_MAX_RINGS_CACHED 31 struct xhci_virt_ep eps[31]; struct completion cmd_completion; - /* Status of the last command issued for this device */ - u32 cmd_status; - struct list_head cmd_list; u8 fake_port; u8 real_port; struct xhci_interval_bw_table *bw_table; @@ -1129,9 +1114,10 @@ enum xhci_setup_dev { #define TRB_TO_SUSPEND_PORT(p) (((p) & (1 << 23)) >> 23) #define LAST_EP_INDEX 30 -/* Set TR Dequeue Pointer command TRB fields */ +/* Set TR Dequeue Pointer command TRB fields, 6.4.3.9 */ #define TRB_TO_STREAM_ID(p) ((((p) & (0xffff << 16)) >> 16)) #define STREAM_ID_FOR_TRB(p) ((((p)) & 0xffff) << 16) +#define SCT_FOR_TRB(p) (((p) << 1) & 0x7) /* Port Status Change Event TRB fields */ @@ -1279,7 +1265,7 @@ union xhci_trb { * since the command ring is 64-byte aligned. * It must also be greater than 16. */ -#define TRBS_PER_SEGMENT 256 +#define TRBS_PER_SEGMENT 64 /* Allow two commands + a link TRB, along with any reserved command TRBs */ #define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3) #define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16) @@ -1309,7 +1295,6 @@ struct xhci_td { /* command descriptor */ struct xhci_cd { - struct list_head cancel_cmd_list; struct xhci_command *command; union xhci_trb *cmd_trb; }; @@ -1352,6 +1337,7 @@ struct xhci_ring { unsigned int num_trbs_free_temp; enum xhci_ring_type type; bool last_td_was_short; + struct radix_tree_root *trb_address_map; }; struct xhci_erst_entry { @@ -1486,6 +1472,8 @@ struct xhci_hcd { /* msi-x vectors */ int msix_count; struct msix_entry *msix_entries; + /* optional clock */ + struct clk *clk; /* data structures */ struct xhci_device_context_array *dcbaa; struct xhci_ring *cmd_ring; @@ -1493,8 +1481,10 @@ struct xhci_hcd { #define CMD_RING_STATE_RUNNING (1 << 0) #define CMD_RING_STATE_ABORTED (1 << 1) #define CMD_RING_STATE_STOPPED (1 << 2) - struct list_head cancel_cmd_list; + struct list_head cmd_list; unsigned int cmd_ring_reserved_trbs; + struct timer_list cmd_timer; + struct xhci_command *current_cmd; struct xhci_ring *event_ring; struct xhci_erst erst; /* Scratchpad */ @@ -1614,6 +1604,34 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci) #define xhci_warn_ratelimited(xhci, fmt, args...) \ dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args) +/* + * Registers should always be accessed with double word or quad word accesses. + * + * Some xHCI implementations may support 64-bit address pointers. Registers + * with 64-bit address pointers should be written to with dword accesses by + * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second. + * xHCI implementations that do not support 64-bit address pointers will ignore + * the high dword, and write order is irrelevant. + */ +static inline u64 xhci_read_64(const struct xhci_hcd *xhci, + __le64 __iomem *regs) +{ + __u32 __iomem *ptr = (__u32 __iomem *) regs; + u64 val_lo = readl(ptr); + u64 val_hi = readl(ptr + 1); + return val_lo + (val_hi << 32); +} +static inline void xhci_write_64(struct xhci_hcd *xhci, + const u64 val, __le64 __iomem *regs) +{ + __u32 __iomem *ptr = (__u32 __iomem *) regs; + u32 val_lo = lower_32_bits(val); + u32 val_hi = upper_32_bits(val); + + writel(val_lo, ptr); + writel(val_hi, ptr + 1); +} + static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci) { return xhci->quirks & XHCI_LINK_TRB_QUIRK; @@ -1720,8 +1738,7 @@ static inline int xhci_register_pci(void) { return 0; } static inline void xhci_unregister_pci(void) {} #endif -#if defined(CONFIG_USB_XHCI_PLATFORM) \ - || defined(CONFIG_USB_XHCI_PLATFORM_MODULE) +#if IS_ENABLED(CONFIG_USB_XHCI_PLATFORM) int xhci_register_plat(void); void xhci_unregister_plat(void); #else @@ -1790,13 +1807,14 @@ struct xhci_segment *trb_in_td(struct xhci_segment *start_seg, dma_addr_t suspect_dma); int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code); void xhci_ring_cmd_db(struct xhci_hcd *xhci); -int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id); -int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - u32 slot_id, enum xhci_setup_dev); -int xhci_queue_vendor_command(struct xhci_hcd *xhci, +int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd, + u32 trb_type, u32 slot_id); +int xhci_queue_address_device(struct xhci_hcd *xhci, struct xhci_command *cmd, + dma_addr_t in_ctx_ptr, u32 slot_id, enum xhci_setup_dev); +int xhci_queue_vendor_command(struct xhci_hcd *xhci, struct xhci_command *cmd, u32 field1, u32 field2, u32 field3, u32 field4); -int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id, - unsigned int ep_index, int suspend); +int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd, + int slot_id, unsigned int ep_index, int suspend); int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index); int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, @@ -1805,18 +1823,21 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index); int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index); -int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - u32 slot_id, bool command_must_succeed); -int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - u32 slot_id, bool command_must_succeed); -int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, - unsigned int ep_index); -int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id); +int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, + struct xhci_command *cmd, dma_addr_t in_ctx_ptr, u32 slot_id, + bool command_must_succeed); +int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd, + dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed); +int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd, + int slot_id, unsigned int ep_index); +int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd, + u32 slot_id); void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id, struct xhci_td *cur_td, struct xhci_dequeue_state *state); void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, + struct xhci_command *cmd, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id, struct xhci_dequeue_state *deq_state); @@ -1826,11 +1847,11 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_dequeue_state *deq_state); void xhci_stop_endpoint_command_watchdog(unsigned long arg); -int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command, - union xhci_trb *cmd_trb); +void xhci_handle_command_timeout(unsigned long data); + void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id); -union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring); +void xhci_cleanup_command_queue(struct xhci_hcd *xhci); /* xHCI roothub code */ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, |