diff options
Diffstat (limited to 'drivers/usb/host/xhci-hub.c')
| -rw-r--r-- | drivers/usb/host/xhci-hub.c | 1158 |
1 files changed, 1051 insertions, 107 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index eac5b53aa9e..aa79e874904 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -20,59 +20,165 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#include <linux/slab.h> +#include <linux/device.h> #include <asm/unaligned.h> #include "xhci.h" +#include "xhci-trace.h" -static void xhci_hub_descriptor(struct xhci_hcd *xhci, - struct usb_hub_descriptor *desc) +#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E) +#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ + PORT_RC | PORT_PLC | PORT_PE) + +/* USB 3.0 BOS descriptor and a capability descriptor, combined */ +static u8 usb_bos_descriptor [] = { + USB_DT_BOS_SIZE, /* __u8 bLength, 5 bytes */ + USB_DT_BOS, /* __u8 bDescriptorType */ + 0x0F, 0x00, /* __le16 wTotalLength, 15 bytes */ + 0x1, /* __u8 bNumDeviceCaps */ + /* First device capability */ + USB_DT_USB_SS_CAP_SIZE, /* __u8 bLength, 10 bytes */ + USB_DT_DEVICE_CAPABILITY, /* Device Capability */ + USB_SS_CAP_TYPE, /* bDevCapabilityType, SUPERSPEED_USB */ + 0x00, /* bmAttributes, LTM off by default */ + USB_5GBPS_OPERATION, 0x00, /* wSpeedsSupported, 5Gbps only */ + 0x03, /* bFunctionalitySupport, + USB 3.0 speed only */ + 0x00, /* bU1DevExitLat, set later. */ + 0x00, 0x00 /* __le16 bU2DevExitLat, set later. */ +}; + + +static void xhci_common_hub_descriptor(struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc, int ports) { - int ports; u16 temp; - ports = HCS_MAX_PORTS(xhci->hcs_params1); - - /* USB 3.0 hubs have a different descriptor, but we fake this for now */ - desc->bDescriptorType = 0x29; desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.9 says 20ms max */ desc->bHubContrCurrent = 0; desc->bNbrPorts = ports; - temp = 1 + (ports / 8); - desc->bDescLength = 7 + 2 * temp; - - /* Why does core/hcd.h define bitmap? It's just confusing. */ - memset(&desc->DeviceRemovable[0], 0, temp); - memset(&desc->DeviceRemovable[temp], 0xff, temp); - - /* Ugh, these should be #defines, FIXME */ - /* Using table 11-13 in USB 2.0 spec. */ temp = 0; - /* Bits 1:0 - support port power switching, or power always on */ + /* Bits 1:0 - support per-port power switching, or power always on */ if (HCC_PPC(xhci->hcc_params)) - temp |= 0x0001; + temp |= HUB_CHAR_INDV_PORT_LPSM; else - temp |= 0x0002; + temp |= HUB_CHAR_NO_LPSM; /* Bit 2 - root hubs are not part of a compound device */ /* Bits 4:3 - individual port over current protection */ - temp |= 0x0008; + temp |= HUB_CHAR_INDV_PORT_OCPM; /* Bits 6:5 - no TTs in root ports */ /* Bit 7 - no port indicators */ - desc->wHubCharacteristics = (__force __u16) cpu_to_le16(temp); + desc->wHubCharacteristics = cpu_to_le16(temp); +} + +/* Fill in the USB 2.0 roothub descriptor */ +static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc) +{ + int ports; + u16 temp; + __u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8]; + u32 portsc; + unsigned int i; + + ports = xhci->num_usb2_ports; + + xhci_common_hub_descriptor(xhci, desc, ports); + desc->bDescriptorType = USB_DT_HUB; + temp = 1 + (ports / 8); + desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp; + + /* The Device Removable bits are reported on a byte granularity. + * If the port doesn't exist within that byte, the bit is set to 0. + */ + memset(port_removable, 0, sizeof(port_removable)); + for (i = 0; i < ports; i++) { + portsc = readl(xhci->usb2_ports[i]); + /* If a device is removable, PORTSC reports a 0, same as in the + * hub descriptor DeviceRemovable bits. + */ + if (portsc & PORT_DEV_REMOVE) + /* This math is hairy because bit 0 of DeviceRemovable + * is reserved, and bit 1 is for port 1, etc. + */ + port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8); + } + + /* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN + * ports on it. The USB 2.0 specification says that there are two + * variable length fields at the end of the hub descriptor: + * DeviceRemovable and PortPwrCtrlMask. But since we can have less than + * USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array + * to set PortPwrCtrlMask bits. PortPwrCtrlMask must always be set to + * 0xFF, so we initialize the both arrays (DeviceRemovable and + * PortPwrCtrlMask) to 0xFF. Then we set the DeviceRemovable for each + * set of ports that actually exist. + */ + memset(desc->u.hs.DeviceRemovable, 0xff, + sizeof(desc->u.hs.DeviceRemovable)); + memset(desc->u.hs.PortPwrCtrlMask, 0xff, + sizeof(desc->u.hs.PortPwrCtrlMask)); + + for (i = 0; i < (ports + 1 + 7) / 8; i++) + memset(&desc->u.hs.DeviceRemovable[i], port_removable[i], + sizeof(__u8)); +} + +/* Fill in the USB 3.0 roothub descriptor */ +static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc) +{ + int ports; + u16 port_removable; + u32 portsc; + unsigned int i; + + ports = xhci->num_usb3_ports; + xhci_common_hub_descriptor(xhci, desc, ports); + desc->bDescriptorType = USB_DT_SS_HUB; + desc->bDescLength = USB_DT_SS_HUB_SIZE; + + /* header decode latency should be zero for roothubs, + * see section 4.23.5.2. + */ + desc->u.ss.bHubHdrDecLat = 0; + desc->u.ss.wHubDelay = 0; + + port_removable = 0; + /* bit 0 is reserved, bit 1 is for port 1, etc. */ + for (i = 0; i < ports; i++) { + portsc = readl(xhci->usb3_ports[i]); + if (portsc & PORT_DEV_REMOVE) + port_removable |= 1 << (i + 1); + } + + desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable); +} + +static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc) +{ + + if (hcd->speed == HCD_USB3) + xhci_usb3_hub_descriptor(hcd, xhci, desc); + else + xhci_usb2_hub_descriptor(hcd, xhci, desc); + } static unsigned int xhci_port_speed(unsigned int port_status) { if (DEV_LOWSPEED(port_status)) - return 1 << USB_PORT_FEAT_LOWSPEED; + return USB_PORT_STAT_LOW_SPEED; if (DEV_HIGHSPEED(port_status)) - return 1 << USB_PORT_FEAT_HIGHSPEED; - if (DEV_SUPERSPEED(port_status)) - return 1 << USB_PORT_FEAT_SUPERSPEED; + return USB_PORT_STAT_HIGH_SPEED; /* * FIXME: Yes, we should check for full speed, but the core uses that as * a default in portspeed() in usb/core/hub.c (which is the only place - * USB_PORT_FEAT_*SPEED is used). + * USB_PORT_STAT_*_SPEED is used). */ return 0; } @@ -123,24 +229,475 @@ static unsigned int xhci_port_speed(unsigned int port_status) * writing a 0 clears the bit and writing a 1 sets the bit (RWS). * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect. */ -static u32 xhci_port_state_to_neutral(u32 state) +u32 xhci_port_state_to_neutral(u32 state) { /* Save read-only status and port state */ return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS); } +/* + * find slot id based on port number. + * @port: The one-based port number from one of the two split roothubs. + */ +int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, + u16 port) +{ + int slot_id; + int i; + enum usb_device_speed speed; + + slot_id = 0; + for (i = 0; i < MAX_HC_SLOTS; i++) { + if (!xhci->devs[i]) + continue; + speed = xhci->devs[i]->udev->speed; + if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3)) + && xhci->devs[i]->fake_port == port) { + slot_id = i; + break; + } + } + + return slot_id; +} + +/* + * Stop device + * It issues stop endpoint command for EP 0 to 30. And wait the last command + * to complete. + * suspend will set to 1, if suspend bit need to set in command. + */ +static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) +{ + struct xhci_virt_device *virt_dev; + struct xhci_command *cmd; + unsigned long flags; + int ret; + int i; + + ret = 0; + virt_dev = xhci->devs[slot_id]; + cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO); + if (!cmd) { + xhci_dbg(xhci, "Couldn't allocate command structure.\n"); + return -ENOMEM; + } + + spin_lock_irqsave(&xhci->lock, flags); + for (i = LAST_EP_INDEX; i > 0; i--) { + if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) { + struct xhci_command *command; + command = xhci_alloc_command(xhci, false, false, + GFP_NOWAIT); + if (!command) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_free_command(xhci, cmd); + return -ENOMEM; + + } + xhci_queue_stop_endpoint(xhci, command, slot_id, i, + suspend); + } + } + xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend); + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + + /* Wait for last stop endpoint command to finish */ + wait_for_completion(cmd->completion); + + if (cmd->status == COMP_CMD_ABORT || cmd->status == COMP_CMD_STOP) { + xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n"); + ret = -ETIME; + } + xhci_free_command(xhci, cmd); + return ret; +} + +/* + * Ring device, it rings the all doorbells unconditionally. + */ +void xhci_ring_device(struct xhci_hcd *xhci, int slot_id) +{ + int i; + + for (i = 0; i < LAST_EP_INDEX + 1; i++) + if (xhci->devs[slot_id]->eps[i].ring && + xhci->devs[slot_id]->eps[i].ring->dequeue) + xhci_ring_ep_doorbell(xhci, slot_id, i, 0); + + return; +} + +static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, + u16 wIndex, __le32 __iomem *addr, u32 port_status) +{ + /* Don't allow the USB core to disable SuperSpeed ports. */ + if (hcd->speed == HCD_USB3) { + xhci_dbg(xhci, "Ignoring request to disable " + "SuperSpeed port.\n"); + return; + } + + /* Write 1 to disable the port */ + writel(port_status | PORT_PE, addr); + port_status = readl(addr); + xhci_dbg(xhci, "disable port, actual port %d status = 0x%x\n", + wIndex, port_status); +} + +static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue, + u16 wIndex, __le32 __iomem *addr, u32 port_status) +{ + char *port_change_bit; + u32 status; + + switch (wValue) { + case USB_PORT_FEAT_C_RESET: + status = PORT_RC; + port_change_bit = "reset"; + break; + case USB_PORT_FEAT_C_BH_PORT_RESET: + status = PORT_WRC; + port_change_bit = "warm(BH) reset"; + break; + case USB_PORT_FEAT_C_CONNECTION: + status = PORT_CSC; + port_change_bit = "connect"; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + status = PORT_OCC; + port_change_bit = "over-current"; + break; + case USB_PORT_FEAT_C_ENABLE: + status = PORT_PEC; + port_change_bit = "enable/disable"; + break; + case USB_PORT_FEAT_C_SUSPEND: + status = PORT_PLC; + port_change_bit = "suspend/resume"; + break; + case USB_PORT_FEAT_C_PORT_LINK_STATE: + status = PORT_PLC; + port_change_bit = "link state"; + break; + default: + /* Should never happen */ + return; + } + /* Change bits are all write 1 to clear */ + writel(port_status | status, addr); + port_status = readl(addr); + xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n", + port_change_bit, wIndex, port_status); +} + +static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array) +{ + int max_ports; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + if (hcd->speed == HCD_USB3) { + max_ports = xhci->num_usb3_ports; + *port_array = xhci->usb3_ports; + } else { + max_ports = xhci->num_usb2_ports; + *port_array = xhci->usb2_ports; + } + + return max_ports; +} + +void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, + int port_id, u32 link_state) +{ + u32 temp; + + temp = readl(port_array[port_id]); + temp = xhci_port_state_to_neutral(temp); + temp &= ~PORT_PLS_MASK; + temp |= PORT_LINK_STROBE | link_state; + writel(temp, port_array[port_id]); +} + +static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, + __le32 __iomem **port_array, int port_id, u16 wake_mask) +{ + u32 temp; + + temp = readl(port_array[port_id]); + temp = xhci_port_state_to_neutral(temp); + + if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT) + temp |= PORT_WKCONN_E; + else + temp &= ~PORT_WKCONN_E; + + if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT) + temp |= PORT_WKDISC_E; + else + temp &= ~PORT_WKDISC_E; + + if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT) + temp |= PORT_WKOC_E; + else + temp &= ~PORT_WKOC_E; + + writel(temp, port_array[port_id]); +} + +/* Test and clear port RWC bit */ +void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, + int port_id, u32 port_bit) +{ + u32 temp; + + temp = readl(port_array[port_id]); + if (temp & port_bit) { + temp = xhci_port_state_to_neutral(temp); + temp |= port_bit; + writel(temp, port_array[port_id]); + } +} + +/* Updates Link Status for USB 2.1 port */ +static void xhci_hub_report_usb2_link_state(u32 *status, u32 status_reg) +{ + if ((status_reg & PORT_PLS_MASK) == XDEV_U2) + *status |= USB_PORT_STAT_L1; +} + +/* Updates Link Status for super Speed port */ +static void xhci_hub_report_usb3_link_state(u32 *status, u32 status_reg) +{ + u32 pls = status_reg & PORT_PLS_MASK; + + /* resume state is a xHCI internal state. + * Do not report it to usb core. + */ + if (pls == XDEV_RESUME) + return; + + /* When the CAS bit is set then warm reset + * should be performed on port + */ + if (status_reg & PORT_CAS) { + /* The CAS bit can be set while the port is + * in any link state. + * Only roothubs have CAS bit, so we + * pretend to be in compliance mode + * unless we're already in compliance + * or the inactive state. + */ + if (pls != USB_SS_PORT_LS_COMP_MOD && + pls != USB_SS_PORT_LS_SS_INACTIVE) { + pls = USB_SS_PORT_LS_COMP_MOD; + } + /* Return also connection bit - + * hub state machine resets port + * when this bit is set. + */ + pls |= USB_PORT_STAT_CONNECTION; + } else { + /* + * If CAS bit isn't set but the Port is already at + * Compliance Mode, fake a connection so the USB core + * notices the Compliance state and resets the port. + * This resolves an issue generated by the SN65LVPE502CP + * in which sometimes the port enters compliance mode + * caused by a delay on the host-device negotiation. + */ + if (pls == USB_SS_PORT_LS_COMP_MOD) + pls |= USB_PORT_STAT_CONNECTION; + } + + /* update status field */ + *status |= pls; +} + +/* + * Function for Compliance Mode Quirk. + * + * This Function verifies if all xhc USB3 ports have entered U0, if so, + * the compliance mode timer is deleted. A port won't enter + * compliance mode if it has previously entered U0. + */ +static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, + u16 wIndex) +{ + u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1); + bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0); + + if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK)) + return; + + if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) { + xhci->port_status_u0 |= 1 << wIndex; + if (xhci->port_status_u0 == all_ports_seen_u0) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, + "All USB3 ports have entered U0 already!"); + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, + "Compliance Mode Recovery Timer Deleted."); + } + } +} + +/* + * Converts a raw xHCI port status into the format that external USB 2.0 or USB + * 3.0 hubs use. + * + * Possible side effects: + * - Mark a port as being done with device resume, + * and ring the endpoint doorbells. + * - Stop the Synopsys redriver Compliance Mode polling. + * - Drop and reacquire the xHCI lock, in order to wait for port resume. + */ +static u32 xhci_get_port_status(struct usb_hcd *hcd, + struct xhci_bus_state *bus_state, + __le32 __iomem **port_array, + u16 wIndex, u32 raw_port_status, + unsigned long flags) + __releases(&xhci->lock) + __acquires(&xhci->lock) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + u32 status = 0; + int slot_id; + + /* wPortChange bits */ + if (raw_port_status & PORT_CSC) + status |= USB_PORT_STAT_C_CONNECTION << 16; + if (raw_port_status & PORT_PEC) + status |= USB_PORT_STAT_C_ENABLE << 16; + if ((raw_port_status & PORT_OCC)) + status |= USB_PORT_STAT_C_OVERCURRENT << 16; + if ((raw_port_status & PORT_RC)) + status |= USB_PORT_STAT_C_RESET << 16; + /* USB3.0 only */ + if (hcd->speed == HCD_USB3) { + if ((raw_port_status & PORT_PLC)) + status |= USB_PORT_STAT_C_LINK_STATE << 16; + if ((raw_port_status & PORT_WRC)) + status |= USB_PORT_STAT_C_BH_RESET << 16; + } + + if (hcd->speed != HCD_USB3) { + if ((raw_port_status & PORT_PLS_MASK) == XDEV_U3 + && (raw_port_status & PORT_POWER)) + status |= USB_PORT_STAT_SUSPEND; + } + if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME && + !DEV_SUPERSPEED(raw_port_status)) { + if ((raw_port_status & PORT_RESET) || + !(raw_port_status & PORT_PE)) + return 0xffffffff; + if (time_after_eq(jiffies, + bus_state->resume_done[wIndex])) { + int time_left; + + xhci_dbg(xhci, "Resume USB2 port %d\n", + wIndex + 1); + bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); + + set_bit(wIndex, &bus_state->rexit_ports); + xhci_set_link_state(xhci, port_array, wIndex, + XDEV_U0); + + spin_unlock_irqrestore(&xhci->lock, flags); + time_left = wait_for_completion_timeout( + &bus_state->rexit_done[wIndex], + msecs_to_jiffies( + XHCI_MAX_REXIT_TIMEOUT)); + spin_lock_irqsave(&xhci->lock, flags); + + if (time_left) { + slot_id = xhci_find_slot_id_by_port(hcd, + xhci, wIndex + 1); + if (!slot_id) { + xhci_dbg(xhci, "slot_id is zero\n"); + return 0xffffffff; + } + xhci_ring_device(xhci, slot_id); + } else { + int port_status = readl(port_array[wIndex]); + xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", + XHCI_MAX_REXIT_TIMEOUT, + port_status); + status |= USB_PORT_STAT_SUSPEND; + clear_bit(wIndex, &bus_state->rexit_ports); + } + + bus_state->port_c_suspend |= 1 << wIndex; + bus_state->suspended_ports &= ~(1 << wIndex); + } else { + /* + * The resume has been signaling for less than + * 20ms. Report the port status as SUSPEND, + * let the usbcore check port status again + * and clear resume signaling later. + */ + status |= USB_PORT_STAT_SUSPEND; + } + } + if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 + && (raw_port_status & PORT_POWER) + && (bus_state->suspended_ports & (1 << wIndex))) { + bus_state->suspended_ports &= ~(1 << wIndex); + if (hcd->speed != HCD_USB3) + bus_state->port_c_suspend |= 1 << wIndex; + } + if (raw_port_status & PORT_CONNECT) { + status |= USB_PORT_STAT_CONNECTION; + status |= xhci_port_speed(raw_port_status); + } + if (raw_port_status & PORT_PE) + status |= USB_PORT_STAT_ENABLE; + if (raw_port_status & PORT_OC) + status |= USB_PORT_STAT_OVERCURRENT; + if (raw_port_status & PORT_RESET) + status |= USB_PORT_STAT_RESET; + if (raw_port_status & PORT_POWER) { + if (hcd->speed == HCD_USB3) + status |= USB_SS_PORT_STAT_POWER; + else + status |= USB_PORT_STAT_POWER; + } + /* Update Port Link State */ + if (hcd->speed == HCD_USB3) { + xhci_hub_report_usb3_link_state(&status, raw_port_status); + /* + * Verify if all USB3 Ports Have entered U0 already. + * Delete Compliance Mode Timer if so. + */ + xhci_del_comp_mod_timer(xhci, raw_port_status, wIndex); + } else { + xhci_hub_report_usb2_link_state(&status, raw_port_status); + } + if (bus_state->port_c_suspend & (1 << wIndex)) + status |= 1 << USB_PORT_FEAT_C_SUSPEND; + + return status; +} + int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - int ports; + int max_ports; unsigned long flags; u32 temp, status; int retval = 0; - u32 __iomem *addr; - char *port_change_bit; + __le32 __iomem **port_array; + int slot_id; + struct xhci_bus_state *bus_state; + u16 link_state = 0; + u16 wake_mask = 0; + u16 timeout = 0; - ports = HCS_MAX_PORTS(xhci->hcs_params1); + max_ports = xhci_get_ports(hcd, &port_array); + bus_state = &xhci->bus_state[hcd_index(hcd)]; spin_lock_irqsave(&xhci->lock, flags); switch (typeReq) { @@ -149,52 +706,186 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, memset(buf, 0, 4); break; case GetHubDescriptor: - xhci_hub_descriptor(xhci, (struct usb_hub_descriptor *) buf); + /* Check to make sure userspace is asking for the USB 3.0 hub + * descriptor for the USB 3.0 roothub. If not, we stall the + * endpoint, like external hubs do. + */ + if (hcd->speed == HCD_USB3 && + (wLength < USB_DT_SS_HUB_SIZE || + wValue != (USB_DT_SS_HUB << 8))) { + xhci_dbg(xhci, "Wrong hub descriptor type for " + "USB 3.0 roothub.\n"); + goto error; + } + xhci_hub_descriptor(hcd, xhci, + (struct usb_hub_descriptor *) buf); break; + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + if ((wValue & 0xff00) != (USB_DT_BOS << 8)) + goto error; + + if (hcd->speed != HCD_USB3) + goto error; + + /* Set the U1 and U2 exit latencies. */ + memcpy(buf, &usb_bos_descriptor, + USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE); + if ((xhci->quirks & XHCI_LPM_SUPPORT)) { + temp = readl(&xhci->cap_regs->hcs_params3); + buf[12] = HCS_U1_LATENCY(temp); + put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]); + } + + /* Indicate whether the host has LTM support. */ + temp = readl(&xhci->cap_regs->hcc_params); + if (HCC_LTC(temp)) + buf[8] |= USB_LTM_SUPPORT; + + spin_unlock_irqrestore(&xhci->lock, flags); + return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE; case GetPortStatus: - if (!wIndex || wIndex > ports) + if (!wIndex || wIndex > max_ports) goto error; wIndex--; - status = 0; - addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff); - temp = xhci_readl(xhci, addr); - xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n", wIndex, temp); - - /* wPortChange bits */ - if (temp & PORT_CSC) - status |= 1 << USB_PORT_FEAT_C_CONNECTION; - if (temp & PORT_PEC) - status |= 1 << USB_PORT_FEAT_C_ENABLE; - if ((temp & PORT_OCC)) - status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT; - /* - * FIXME ignoring suspend, reset, and USB 2.1/3.0 specific - * changes - */ - if (temp & PORT_CONNECT) { - status |= 1 << USB_PORT_FEAT_CONNECTION; - status |= xhci_port_speed(temp); + temp = readl(port_array[wIndex]); + if (temp == 0xffffffff) { + retval = -ENODEV; + break; } - if (temp & PORT_PE) - status |= 1 << USB_PORT_FEAT_ENABLE; - if (temp & PORT_OC) - status |= 1 << USB_PORT_FEAT_OVER_CURRENT; - if (temp & PORT_RESET) - status |= 1 << USB_PORT_FEAT_RESET; - if (temp & PORT_POWER) - status |= 1 << USB_PORT_FEAT_POWER; + status = xhci_get_port_status(hcd, bus_state, port_array, + wIndex, temp, flags); + if (status == 0xffffffff) + goto error; + + xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n", + wIndex, temp); xhci_dbg(xhci, "Get port status returned 0x%x\n", status); + put_unaligned(cpu_to_le32(status), (__le32 *) buf); break; case SetPortFeature: + if (wValue == USB_PORT_FEAT_LINK_STATE) + link_state = (wIndex & 0xff00) >> 3; + if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK) + wake_mask = wIndex & 0xff00; + /* The MSB of wIndex is the U1/U2 timeout */ + timeout = (wIndex & 0xff00) >> 8; wIndex &= 0xff; - if (!wIndex || wIndex > ports) + if (!wIndex || wIndex > max_ports) goto error; wIndex--; - addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff); - temp = xhci_readl(xhci, addr); + temp = readl(port_array[wIndex]); + if (temp == 0xffffffff) { + retval = -ENODEV; + break; + } temp = xhci_port_state_to_neutral(temp); + /* FIXME: What new port features do we need to support? */ switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + temp = readl(port_array[wIndex]); + if ((temp & PORT_PLS_MASK) != XDEV_U0) { + /* Resume the port to U0 first */ + xhci_set_link_state(xhci, port_array, wIndex, + XDEV_U0); + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(10); + spin_lock_irqsave(&xhci->lock, flags); + } + /* In spec software should not attempt to suspend + * a port unless the port reports that it is in the + * enabled (PED = ‘1’,PLS < ‘3’) state. + */ + temp = readl(port_array[wIndex]); + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) + || (temp & PORT_PLS_MASK) >= XDEV_U3) { + xhci_warn(xhci, "USB core suspending device " + "not in U0/U1/U2.\n"); + goto error; + } + + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); + if (!slot_id) { + xhci_warn(xhci, "slot_id is zero\n"); + goto error; + } + /* unlock to execute stop endpoint commands */ + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_stop_device(xhci, slot_id, 1); + spin_lock_irqsave(&xhci->lock, flags); + + xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3); + + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(10); /* wait device to enter */ + spin_lock_irqsave(&xhci->lock, flags); + + temp = readl(port_array[wIndex]); + bus_state->suspended_ports |= 1 << wIndex; + break; + case USB_PORT_FEAT_LINK_STATE: + temp = readl(port_array[wIndex]); + + /* Disable port */ + if (link_state == USB_SS_PORT_LS_SS_DISABLED) { + xhci_dbg(xhci, "Disable port %d\n", wIndex); + temp = xhci_port_state_to_neutral(temp); + /* + * Clear all change bits, so that we get a new + * connection event. + */ + temp |= PORT_CSC | PORT_PEC | PORT_WRC | + PORT_OCC | PORT_RC | PORT_PLC | + PORT_CEC; + writel(temp | PORT_PE, port_array[wIndex]); + temp = readl(port_array[wIndex]); + break; + } + + /* Put link in RxDetect (enable port) */ + if (link_state == USB_SS_PORT_LS_RX_DETECT) { + xhci_dbg(xhci, "Enable port %d\n", wIndex); + xhci_set_link_state(xhci, port_array, wIndex, + link_state); + temp = readl(port_array[wIndex]); + break; + } + + /* Software should not attempt to set + * port link state above '3' (U3) and the port + * must be enabled. + */ + if ((temp & PORT_PE) == 0 || + (link_state > USB_SS_PORT_LS_U3)) { + xhci_warn(xhci, "Cannot set link state.\n"); + goto error; + } + + if (link_state == USB_SS_PORT_LS_U3) { + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); + if (slot_id) { + /* unlock to execute stop endpoint + * commands */ + spin_unlock_irqrestore(&xhci->lock, + flags); + xhci_stop_device(xhci, slot_id, 1); + spin_lock_irqsave(&xhci->lock, flags); + } + } + + xhci_set_link_state(xhci, port_array, wIndex, + link_state); + + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(20); /* wait device to enter */ + spin_lock_irqsave(&xhci->lock, flags); + + temp = readl(port_array[wIndex]); + if (link_state == USB_SS_PORT_LS_U3) + bus_state->suspended_ports |= 1 << wIndex; + break; case USB_PORT_FEAT_POWER: /* * Turn on ports, even if there isn't per-port switching. @@ -202,53 +893,131 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, * However, khubd will ignore the roothub events until * the roothub is registered. */ - xhci_writel(xhci, temp | PORT_POWER, addr); + writel(temp | PORT_POWER, port_array[wIndex]); - temp = xhci_readl(xhci, addr); + temp = readl(port_array[wIndex]); xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp); + + spin_unlock_irqrestore(&xhci->lock, flags); + temp = usb_acpi_power_manageable(hcd->self.root_hub, + wIndex); + if (temp) + usb_acpi_set_power_state(hcd->self.root_hub, + wIndex, true); + spin_lock_irqsave(&xhci->lock, flags); break; case USB_PORT_FEAT_RESET: temp = (temp | PORT_RESET); - xhci_writel(xhci, temp, addr); + writel(temp, port_array[wIndex]); - temp = xhci_readl(xhci, addr); + temp = readl(port_array[wIndex]); xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp); break; + case USB_PORT_FEAT_REMOTE_WAKE_MASK: + xhci_set_remote_wake_mask(xhci, port_array, + wIndex, wake_mask); + temp = readl(port_array[wIndex]); + xhci_dbg(xhci, "set port remote wake mask, " + "actual port %d status = 0x%x\n", + wIndex, temp); + break; + case USB_PORT_FEAT_BH_PORT_RESET: + temp |= PORT_WR; + writel(temp, port_array[wIndex]); + + temp = readl(port_array[wIndex]); + break; + case USB_PORT_FEAT_U1_TIMEOUT: + if (hcd->speed != HCD_USB3) + goto error; + temp = readl(port_array[wIndex] + PORTPMSC); + temp &= ~PORT_U1_TIMEOUT_MASK; + temp |= PORT_U1_TIMEOUT(timeout); + writel(temp, port_array[wIndex] + PORTPMSC); + break; + case USB_PORT_FEAT_U2_TIMEOUT: + if (hcd->speed != HCD_USB3) + goto error; + temp = readl(port_array[wIndex] + PORTPMSC); + temp &= ~PORT_U2_TIMEOUT_MASK; + temp |= PORT_U2_TIMEOUT(timeout); + writel(temp, port_array[wIndex] + PORTPMSC); + break; default: goto error; } - temp = xhci_readl(xhci, addr); /* unblock any posted writes */ + /* unblock any posted writes */ + temp = readl(port_array[wIndex]); break; case ClearPortFeature: - if (!wIndex || wIndex > ports) + if (!wIndex || wIndex > max_ports) goto error; wIndex--; - addr = &xhci->op_regs->port_status_base + - NUM_PORT_REGS*(wIndex & 0xff); - temp = xhci_readl(xhci, addr); + temp = readl(port_array[wIndex]); + if (temp == 0xffffffff) { + retval = -ENODEV; + break; + } + /* FIXME: What new port features do we need to support? */ temp = xhci_port_state_to_neutral(temp); switch (wValue) { - case USB_PORT_FEAT_C_RESET: - status = PORT_RC; - port_change_bit = "reset"; + case USB_PORT_FEAT_SUSPEND: + temp = readl(port_array[wIndex]); + xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n"); + xhci_dbg(xhci, "PORTSC %04x\n", temp); + if (temp & PORT_RESET) + goto error; + if ((temp & PORT_PLS_MASK) == XDEV_U3) { + if ((temp & PORT_PE) == 0) + goto error; + + xhci_set_link_state(xhci, port_array, wIndex, + XDEV_RESUME); + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(20); + spin_lock_irqsave(&xhci->lock, flags); + xhci_set_link_state(xhci, port_array, wIndex, + XDEV_U0); + } + bus_state->port_c_suspend |= 1 << wIndex; + + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); + if (!slot_id) { + xhci_dbg(xhci, "slot_id is zero\n"); + goto error; + } + xhci_ring_device(xhci, slot_id); break; + case USB_PORT_FEAT_C_SUSPEND: + bus_state->port_c_suspend &= ~(1 << wIndex); + case USB_PORT_FEAT_C_RESET: + case USB_PORT_FEAT_C_BH_PORT_RESET: case USB_PORT_FEAT_C_CONNECTION: - status = PORT_CSC; - port_change_bit = "connect"; - break; case USB_PORT_FEAT_C_OVER_CURRENT: - status = PORT_OCC; - port_change_bit = "over-current"; + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_PORT_LINK_STATE: + xhci_clear_port_change_bit(xhci, wValue, wIndex, + port_array[wIndex], temp); + break; + case USB_PORT_FEAT_ENABLE: + xhci_disable_port(hcd, xhci, wIndex, + port_array[wIndex], temp); + break; + case USB_PORT_FEAT_POWER: + writel(temp & ~PORT_POWER, port_array[wIndex]); + + spin_unlock_irqrestore(&xhci->lock, flags); + temp = usb_acpi_power_manageable(hcd->self.root_hub, + wIndex); + if (temp) + usb_acpi_set_power_state(hcd->self.root_hub, + wIndex, false); + spin_lock_irqsave(&xhci->lock, flags); break; default: goto error; } - /* Change bits are all write 1 to clear */ - xhci_writel(xhci, temp | status, addr); - temp = xhci_readl(xhci, addr); - xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n", - port_change_bit, wIndex, temp); - temp = xhci_readl(xhci, addr); /* unblock any posted writes */ break; default: error: @@ -263,7 +1032,6 @@ error: * Returns 0 if the status hasn't changed, or the number of bytes in buf. * Ports are 0-indexed from the HCD point of view, * and 1-indexed from the USB core pointer of view. - * xHCI instances can have up to 127 ports, so FIXME if you see more than 15. * * Note that the status change bits will be cleared as soon as a port status * change event is generated, so we use the saved status from that event. @@ -272,37 +1040,213 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) { unsigned long flags; u32 temp, status; + u32 mask; int i, retval; struct xhci_hcd *xhci = hcd_to_xhci(hcd); - int ports; - u32 __iomem *addr; + int max_ports; + __le32 __iomem **port_array; + struct xhci_bus_state *bus_state; + bool reset_change = false; - ports = HCS_MAX_PORTS(xhci->hcs_params1); + max_ports = xhci_get_ports(hcd, &port_array); + bus_state = &xhci->bus_state[hcd_index(hcd)]; /* Initial status is no changes */ - buf[0] = 0; - status = 0; - if (ports > 7) { - buf[1] = 0; - retval = 2; - } else { - retval = 1; - } + retval = (max_ports + 8) / 8; + memset(buf, 0, retval); + + /* + * Inform the usbcore about resume-in-progress by returning + * a non-zero value even if there are no status changes. + */ + status = bus_state->resuming_ports; + + mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC; spin_lock_irqsave(&xhci->lock, flags); /* For each port, did anything change? If so, set that bit in buf. */ - for (i = 0; i < ports; i++) { - addr = &xhci->op_regs->port_status_base + - NUM_PORT_REGS*i; - temp = xhci_readl(xhci, addr); - if (temp & (PORT_CSC | PORT_PEC | PORT_OCC)) { - if (i < 7) - buf[0] |= 1 << (i + 1); - else - buf[1] |= 1 << (i - 7); + for (i = 0; i < max_ports; i++) { + temp = readl(port_array[i]); + if (temp == 0xffffffff) { + retval = -ENODEV; + break; + } + if ((temp & mask) != 0 || + (bus_state->port_c_suspend & 1 << i) || + (bus_state->resume_done[i] && time_after_eq( + jiffies, bus_state->resume_done[i]))) { + buf[(i + 1) / 8] |= 1 << (i + 1) % 8; status = 1; } + if ((temp & PORT_RC)) + reset_change = true; + } + if (!status && !reset_change) { + xhci_dbg(xhci, "%s: stopping port polling.\n", __func__); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); } spin_unlock_irqrestore(&xhci->lock, flags); return status ? retval : 0; } + +#ifdef CONFIG_PM + +int xhci_bus_suspend(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int max_ports, port_index; + __le32 __iomem **port_array; + struct xhci_bus_state *bus_state; + unsigned long flags; + + max_ports = xhci_get_ports(hcd, &port_array); + bus_state = &xhci->bus_state[hcd_index(hcd)]; + + spin_lock_irqsave(&xhci->lock, flags); + + if (hcd->self.root_hub->do_remote_wakeup) { + if (bus_state->resuming_ports) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "suspend failed because " + "a port is resuming\n"); + return -EBUSY; + } + } + + port_index = max_ports; + bus_state->bus_suspended = 0; + while (port_index--) { + /* suspend the port if the port is not suspended */ + u32 t1, t2; + int slot_id; + + t1 = readl(port_array[port_index]); + t2 = xhci_port_state_to_neutral(t1); + + if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) { + xhci_dbg(xhci, "port %d not suspended\n", port_index); + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + port_index + 1); + if (slot_id) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_stop_device(xhci, slot_id, 1); + spin_lock_irqsave(&xhci->lock, flags); + } + t2 &= ~PORT_PLS_MASK; + t2 |= PORT_LINK_STROBE | XDEV_U3; + set_bit(port_index, &bus_state->bus_suspended); + } + /* USB core sets remote wake mask for USB 3.0 hubs, + * including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME + * is enabled, so also enable remote wake here. + */ + if (hcd->self.root_hub->do_remote_wakeup + && device_may_wakeup(hcd->self.controller)) { + + if (t1 & PORT_CONNECT) { + t2 |= PORT_WKOC_E | PORT_WKDISC_E; + t2 &= ~PORT_WKCONN_E; + } else { + t2 |= PORT_WKOC_E | PORT_WKCONN_E; + t2 &= ~PORT_WKDISC_E; + } + } else + t2 &= ~PORT_WAKE_BITS; + + t1 = xhci_port_state_to_neutral(t1); + if (t1 != t2) + writel(t2, port_array[port_index]); + } + hcd->state = HC_STATE_SUSPENDED; + bus_state->next_statechange = jiffies + msecs_to_jiffies(10); + spin_unlock_irqrestore(&xhci->lock, flags); + return 0; +} + +int xhci_bus_resume(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int max_ports, port_index; + __le32 __iomem **port_array; + struct xhci_bus_state *bus_state; + u32 temp; + unsigned long flags; + + max_ports = xhci_get_ports(hcd, &port_array); + bus_state = &xhci->bus_state[hcd_index(hcd)]; + + if (time_before(jiffies, bus_state->next_statechange)) + msleep(5); + + spin_lock_irqsave(&xhci->lock, flags); + if (!HCD_HW_ACCESSIBLE(hcd)) { + spin_unlock_irqrestore(&xhci->lock, flags); + return -ESHUTDOWN; + } + + /* delay the irqs */ + temp = readl(&xhci->op_regs->command); + temp &= ~CMD_EIE; + writel(temp, &xhci->op_regs->command); + + port_index = max_ports; + while (port_index--) { + /* Check whether need resume ports. If needed + resume port and disable remote wakeup */ + u32 temp; + int slot_id; + + temp = readl(port_array[port_index]); + if (DEV_SUPERSPEED(temp)) + temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); + else + temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); + if (test_bit(port_index, &bus_state->bus_suspended) && + (temp & PORT_PLS_MASK)) { + if (DEV_SUPERSPEED(temp)) { + xhci_set_link_state(xhci, port_array, + port_index, XDEV_U0); + } else { + xhci_set_link_state(xhci, port_array, + port_index, XDEV_RESUME); + + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(20); + spin_lock_irqsave(&xhci->lock, flags); + + xhci_set_link_state(xhci, port_array, + port_index, XDEV_U0); + } + /* wait for the port to enter U0 and report port link + * state change. + */ + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(20); + spin_lock_irqsave(&xhci->lock, flags); + + /* Clear PLC */ + xhci_test_and_clear_bit(xhci, port_array, port_index, + PORT_PLC); + + slot_id = xhci_find_slot_id_by_port(hcd, + xhci, port_index + 1); + if (slot_id) + xhci_ring_device(xhci, slot_id); + } else + writel(temp, port_array[port_index]); + } + + (void) readl(&xhci->op_regs->command); + + bus_state->next_statechange = jiffies + msecs_to_jiffies(5); + /* re-enable irqs */ + temp = readl(&xhci->op_regs->command); + temp |= CMD_EIE; + writel(temp, &xhci->op_regs->command); + temp = readl(&xhci->op_regs->command); + + spin_unlock_irqrestore(&xhci->lock, flags); + return 0; +} + +#endif /* CONFIG_PM */ |