1 files changed, 92 insertions, 181 deletions

diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index d0360f65ebd..bb150967572 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -14,9 +14,20 @@
  * This file is licenced under the GPL.
  */
 
-#ifndef CONFIG_PCI
-#error "This file is PCI bus glue.  CONFIG_PCI must be defined."
-#endif
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+#include "pci-quirks.h"
+
+#define DRIVER_DESC "OHCI PCI platform driver"
+
+static const char hcd_name[] = "ohci-pci";
+
 
 /*-------------------------------------------------------------------------*/
 
@@ -119,13 +130,6 @@ static void ohci_quirk_nec_worker(struct work_struct *work)
 	struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
 	int status;
 
-	status = ohci_init(ohci);
-	if (status != 0) {
-		ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
-			 "ohci_init", status);
-		return;
-	}
-
 	status = ohci_restart(ohci);
 	if (status != 0)
 		ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
@@ -143,6 +147,23 @@ static int ohci_quirk_nec(struct usb_hcd *hcd)
 	return 0;
 }
 
+static int ohci_quirk_amd700(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	if (usb_amd_find_chipset_info())
+		ohci->flags |= OHCI_QUIRK_AMD_PLL;
+
+	/* SB800 needs pre-fetch fix */
+	if (usb_amd_prefetch_quirk()) {
+		ohci->flags |= OHCI_QUIRK_AMD_PREFETCH;
+		ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
+	}
+
+	ohci->flags |= OHCI_QUIRK_GLOBAL_SUSPEND;
+	return 0;
+}
+
 /* List of quirks for OHCI */
 static const struct pci_device_id ohci_pci_quirks[] = {
 	{
@@ -181,6 +202,19 @@ static const struct pci_device_id ohci_pci_quirks[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
 		.driver_data = (unsigned long) broken_suspend,
 	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+
 	/* FIXME for some of the early AMD 760 southbridges, OHCI
 	 * won't work at all.  blacklist them.
 	 */
@@ -191,10 +225,10 @@ static const struct pci_device_id ohci_pci_quirks[] = {
 static int ohci_pci_reset (struct usb_hcd *hcd)
 {
 	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
 	int ret = 0;
 
 	if (hcd->self.controller) {
-		struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
 		const struct pci_device_id *quirk_id;
 
 		quirk_id = pci_match_id(ohci_pci_quirks, pdev);
@@ -204,184 +238,33 @@ static int ohci_pci_reset (struct usb_hcd *hcd)
 			ret = quirk(hcd);
 		}
 	}
-	if (ret == 0) {
-		ohci_hcd_init (ohci);
-		return ohci_init (ohci);
-	}
-	return ret;
-}
 
-
-static int __devinit ohci_pci_start (struct usb_hcd *hcd)
-{
-	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-	int		ret;
-
-#ifdef CONFIG_PM /* avoid warnings about unused pdev */
-	if (hcd->self.controller) {
-		struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
-
-		/* RWC may not be set for add-in PCI cards, since boot
-		 * firmware probably ignored them.  This transfers PCI
-		 * PM wakeup capabilities (once the PCI layer is fixed).
-		 */
-		if (device_may_wakeup(&pdev->dev))
-			ohci->hc_control |= OHCI_CTRL_RWC;
-	}
-#endif /* CONFIG_PM */
-
-	ret = ohci_run (ohci);
-	if (ret < 0) {
-		ohci_err (ohci, "can't start\n");
-		ohci_stop (hcd);
-	}
+	if (ret == 0)
+		ret = ohci_setup(hcd);
+	/*
+	* After ohci setup RWC may not be set for add-in PCI cards.
+	* This transfers PCI PM wakeup capabilities.
+	*/
+	if (device_can_wakeup(&pdev->dev))
+		ohci->hc_control |= OHCI_CTRL_RWC;
 	return ret;
 }
 
-#if	defined(CONFIG_USB_PERSIST) && (defined(CONFIG_USB_EHCI_HCD) || \
-		defined(CONFIG_USB_EHCI_HCD_MODULE))
-
-/* Following a power loss, we must prepare to regain control of the ports
- * we used to own.  This means turning on the port power before ehci-hcd
- * tries to switch ownership.
- *
- * This isn't a 100% perfect solution.  On most systems the OHCI controllers
- * lie at lower PCI addresses than the EHCI controller, so they will be
- * discovered (and hence resumed) first.  But there is no guarantee things
- * will always work this way.  If the EHCI controller is resumed first and
- * the OHCI ports are unpowered, then the handover will fail.
- */
-static void prepare_for_handover(struct usb_hcd *hcd)
-{
-	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
-	int		port;
-
-	/* Here we "know" root ports should always stay powered */
-	ohci_dbg(ohci, "powerup ports\n");
-	for (port = 0; port < ohci->num_ports; port++)
-		ohci_writel(ohci, RH_PS_PPS,
-				&ohci->regs->roothub.portstatus[port]);
-
-	/* Flush those writes */
-	ohci_readl(ohci, &ohci->regs->control);
-	msleep(20);
-}
-
-#else
-
-static inline void prepare_for_handover(struct usb_hcd *hcd)
-{ }
-
-#endif	/* CONFIG_USB_PERSIST etc. */
-
-#ifdef	CONFIG_PM
-
-static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
-{
-	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-	unsigned long	flags;
-	int		rc = 0;
-
-	/* Root hub was already suspended. Disable irq emission and
-	 * mark HW unaccessible, bail out if RH has been resumed. Use
-	 * the spinlock to properly synchronize with possible pending
-	 * RH suspend or resume activity.
-	 *
-	 * This is still racy as hcd->state is manipulated outside of
-	 * any locks =P But that will be a different fix.
-	 */
-	spin_lock_irqsave (&ohci->lock, flags);
-	if (hcd->state != HC_STATE_SUSPENDED) {
-		rc = -EINVAL;
-		goto bail;
-	}
-	ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
-	(void)ohci_readl(ohci, &ohci->regs->intrdisable);
-
-	/* make sure snapshot being resumed re-enumerates everything */
-	if (message.event == PM_EVENT_PRETHAW)
-		ohci_usb_reset(ohci);
-
-	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- bail:
-	spin_unlock_irqrestore (&ohci->lock, flags);
-
-	return rc;
-}
-
-
-static int ohci_pci_resume (struct usb_hcd *hcd)
-{
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-	/* FIXME: we should try to detect loss of VBUS power here */
-	prepare_for_handover(hcd);
-
-	return 0;
-}
-
-#endif	/* CONFIG_PM */
-
-
-/*-------------------------------------------------------------------------*/
+static struct hc_driver __read_mostly ohci_pci_hc_driver;
 
-static const struct hc_driver ohci_pci_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"OHCI Host Controller",
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ohci_irq,
-	.flags =		HCD_MEMORY | HCD_USB11,
-
-	/*
-	 * basic lifecycle operations
-	 */
+static const struct ohci_driver_overrides pci_overrides __initconst = {
+	.product_desc =		"OHCI PCI host controller",
 	.reset =		ohci_pci_reset,
-	.start =		ohci_pci_start,
-	.stop =			ohci_stop,
-	.shutdown =		ohci_shutdown,
-
-#ifdef	CONFIG_PM
-	/* these suspend/resume entries are for upstream PCI glue ONLY */
-	.suspend =		ohci_pci_suspend,
-	.resume =		ohci_pci_resume,
-#endif
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ohci_urb_enqueue,
-	.urb_dequeue =		ohci_urb_dequeue,
-	.endpoint_disable =	ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
-#ifdef	CONFIG_PM
-	.bus_suspend =		ohci_bus_suspend,
-	.bus_resume =		ohci_bus_resume,
-#endif
-	.start_port_reset =	ohci_start_port_reset,
 };
 
-/*-------------------------------------------------------------------------*/
-
-
 static const struct pci_device_id pci_ids [] = { {
 	/* handle any USB OHCI controller */
 	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
 	.driver_data =	(unsigned long) &ohci_pci_hc_driver,
+	}, {
+	/* The device in the ConneXT I/O hub has no class reg */
+	PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI),
+	.driver_data =	(unsigned long) &ohci_pci_hc_driver,
 	}, { /* end: all zeroes */ }
 };
 MODULE_DEVICE_TABLE (pci, pci_ids);
@@ -393,12 +276,40 @@ static struct pci_driver ohci_pci_driver = {
 
 	.probe =	usb_hcd_pci_probe,
 	.remove =	usb_hcd_pci_remove,
+	.shutdown =	usb_hcd_pci_shutdown,
+
+#ifdef CONFIG_PM
+	.driver =	{
+		.pm =	&usb_hcd_pci_pm_ops
+	},
+#endif
+};
+
+static int __init ohci_pci_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+	ohci_init_driver(&ohci_pci_hc_driver, &pci_overrides);
 
 #ifdef	CONFIG_PM
-	.suspend =	usb_hcd_pci_suspend,
-	.resume =	usb_hcd_pci_resume,
+	/* Entries for the PCI suspend/resume callbacks are special */
+	ohci_pci_hc_driver.pci_suspend = ohci_suspend;
+	ohci_pci_hc_driver.pci_resume = ohci_resume;
 #endif
 
-	.shutdown =	usb_hcd_pci_shutdown,
-};
+	return pci_register_driver(&ohci_pci_driver);
+}
+module_init(ohci_pci_init);
+
+static void __exit ohci_pci_cleanup(void)
+{
+	pci_unregister_driver(&ohci_pci_driver);
+}
+module_exit(ohci_pci_cleanup);
 
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_SOFTDEP("pre: ehci_pci");