diff options
Diffstat (limited to 'drivers/usb/host/ohci-hub.c')
| -rw-r--r-- | drivers/usb/host/ohci-hub.c | 90 |
1 files changed, 29 insertions, 61 deletions
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 2f3619eefef..b4940de1eba 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -90,6 +90,24 @@ __acquires(ohci->lock) dl_done_list (ohci); finish_unlinks (ohci, ohci_frame_no(ohci)); + /* + * Some controllers don't handle "global" suspend properly if + * there are unsuspended ports. For these controllers, put all + * the enabled ports into suspend before suspending the root hub. + */ + if (ohci->flags & OHCI_QUIRK_GLOBAL_SUSPEND) { + __hc32 __iomem *portstat = ohci->regs->roothub.portstatus; + int i; + unsigned temp; + + for (i = 0; i < ohci->num_ports; (++i, ++portstat)) { + temp = ohci_readl(ohci, portstat); + if ((temp & (RH_PS_PES | RH_PS_PSS)) == + RH_PS_PES) + ohci_writel(ohci, RH_PS_PSS, portstat); + } + } + /* maybe resume can wake root hub */ if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) { ohci->hc_control |= OHCI_CTRL_RWE; @@ -176,7 +194,6 @@ __acquires(ohci->lock) if (status == -EBUSY) { if (!autostopped) { spin_unlock_irq (&ohci->lock); - (void) ohci_init (ohci); status = ohci_restart (ohci); usb_root_hub_lost_power(hcd->self.root_hub); @@ -213,10 +230,11 @@ __acquires(ohci->lock) /* Sometimes PCI D3 suspend trashes frame timings ... */ periodic_reinit (ohci); - /* the following code is executed with ohci->lock held and - * irqs disabled if and only if autostopped is true + /* + * The following code is executed with ohci->lock held and + * irqs disabled if and only if autostopped is true. This + * will cause sparse to warn about a "context imbalance". */ - skip_resume: /* interrupts might have been disabled */ ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable); @@ -316,48 +334,6 @@ static int ohci_bus_resume (struct usb_hcd *hcd) return rc; } -/* Carry out the final steps of resuming the controller device */ -static void __maybe_unused ohci_finish_controller_resume(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int port; - bool need_reinit = false; - - /* See if the controller is already running or has been reset */ - ohci->hc_control = ohci_readl(ohci, &ohci->regs->control); - if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) { - need_reinit = true; - } else { - switch (ohci->hc_control & OHCI_CTRL_HCFS) { - case OHCI_USB_OPER: - case OHCI_USB_RESET: - need_reinit = true; - } - } - - /* If needed, reinitialize and suspend the root hub */ - if (need_reinit) { - spin_lock_irq(&ohci->lock); - ohci_rh_resume(ohci); - ohci_rh_suspend(ohci, 0); - spin_unlock_irq(&ohci->lock); - } - - /* Normally just turn on port power and enable interrupts */ - else { - ohci_dbg(ohci, "powerup ports\n"); - for (port = 0; port < ohci->num_ports; port++) - ohci_writel(ohci, RH_PS_PPS, - &ohci->regs->roothub.portstatus[port]); - - ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable); - ohci_readl(ohci, &ohci->regs->intrenable); - msleep(20); - } - - usb_hcd_resume_root_hub(hcd); -} - /* Carry out polling-, autostop-, and autoresume-related state changes */ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, int any_connected, int rhsc_status) @@ -480,8 +456,7 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, /* build "status change" packet (one or two bytes) from HC registers */ -static int -ohci_hub_status_data (struct usb_hcd *hcd, char *buf) +int ohci_hub_status_data(struct usb_hcd *hcd, char *buf) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); int i, changed = 0, length = 1; @@ -546,6 +521,7 @@ done: return changed ? length : 0; } +EXPORT_SYMBOL_GPL(ohci_hub_status_data); /*-------------------------------------------------------------------------*/ @@ -574,7 +550,7 @@ ohci_hub_descriptor ( temp |= 0x0010; else if (rh & RH_A_OCPM) /* per-port overcurrent reporting? */ temp |= 0x0008; - desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ohci, temp); + desc->wHubCharacteristics = cpu_to_le16(temp); /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ rh = roothub_b (ohci); @@ -622,14 +598,8 @@ static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port) /* See usb 7.1.7.5: root hubs must issue at least 50 msec reset signaling, * not necessarily continuous ... to guard against resume signaling. - * The short timeout is safe for non-root hubs, and is backward-compatible - * with earlier Linux hosts. */ -#ifdef CONFIG_USB_SUSPEND #define PORT_RESET_MSEC 50 -#else -#define PORT_RESET_MSEC 10 -#endif /* this timer value might be vendor-specific ... */ #define PORT_RESET_HW_MSEC 10 @@ -694,7 +664,7 @@ static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port) return 0; } -static int ohci_hub_control ( +int ohci_hub_control( struct usb_hcd *hcd, u16 typeReq, u16 wValue, @@ -773,10 +743,8 @@ static int ohci_hub_control ( temp = roothub_portstatus (ohci, wIndex); put_unaligned_le32(temp, buf); -#ifndef OHCI_VERBOSE_DEBUG - if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ -#endif - dbg_port (ohci, "GetStatus", wIndex, temp); + if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ + dbg_port(ohci, "GetStatus", wIndex, temp); break; case SetHubFeature: switch (wValue) { @@ -822,4 +790,4 @@ error: } return retval; } - +EXPORT_SYMBOL_GPL(ohci_hub_control); |