diff options
Diffstat (limited to 'drivers/usb/host/Kconfig')
| -rw-r--r-- | drivers/usb/host/Kconfig | 40 |
1 files changed, 32 insertions, 8 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a9707da7da0..03314f861be 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -29,6 +29,14 @@ if USB_XHCI_HCD config USB_XHCI_PLATFORM tristate +config USB_XHCI_MVEBU + tristate "xHCI support for Marvell Armada 375/38x" + select USB_XHCI_PLATFORM + depends on ARCH_MVEBU || COMPILE_TEST + ---help--- + Say 'Y' to enable the support for the xHCI host controller + found in Marvell Armada 375/38x ARM SOCs. + endif # USB_XHCI_HCD config USB_EHCI_HCD @@ -168,9 +176,8 @@ config USB_EHCI_HCD_AT91 config USB_EHCI_MSM tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller" - depends on ARCH_MSM + depends on ARCH_MSM || ARCH_QCOM select USB_EHCI_ROOT_HUB_TT - select USB_MSM_OTG ---help--- Enables support for the USB Host controller present on the Qualcomm chipsets. Root Hub has inbuilt TT. @@ -314,7 +321,6 @@ config USB_ISP1760_HCD config USB_ISP1362_HCD tristate "ISP1362 HCD support" - default N ---help--- Supports the Philips ISP1362 chip as a host controller @@ -326,7 +332,6 @@ config USB_ISP1362_HCD config USB_FUSBH200_HCD tristate "FUSBH200 HCD support" depends on USB - default N ---help--- Faraday FUSBH200 is designed to meet USB2.0 EHCI specification with minor modification. @@ -337,7 +342,6 @@ config USB_FUSBH200_HCD config USB_FOTG210_HCD tristate "FOTG210 HCD support" depends on USB - default N ---help--- Faraday FOTG210 is an OTG controller which can be configured as an USB2.0 host. It is designed to meet USB2.0 EHCI specification @@ -346,10 +350,19 @@ config USB_FOTG210_HCD To compile this driver as a module, choose M here: the module will be called fotg210-hcd. +config USB_MAX3421_HCD + tristate "MAX3421 HCD (USB-over-SPI) support" + depends on USB && SPI + ---help--- + The Maxim MAX3421E chip supports standard USB 2.0-compliant + full-speed devices either in host or peripheral mode. This + driver supports the host-mode of the MAX3421E only. + + To compile this driver as a module, choose M here: the module will + be called max3421-hcd. + config USB_OHCI_HCD tristate "OHCI HCD (USB 1.1) support" - select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 - depends on USB_ISP1301 || !ARCH_LPC32XX ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's @@ -368,6 +381,7 @@ if USB_OHCI_HCD config USB_OHCI_HCD_OMAP1 tristate "OHCI support for OMAP1/2 chips" depends on ARCH_OMAP1 + depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) default y ---help--- Enables support for the OHCI controller on OMAP1/2 chips. @@ -391,6 +405,7 @@ config USB_OHCI_HCD_S3C2410 config USB_OHCI_HCD_LPC32XX tristate "Support for LPC on-chip OHCI USB controller" depends on USB_OHCI_HCD && ARCH_LPC32XX + depends on USB_ISP1301 default y ---help--- Enables support for the on-chip OHCI controller on @@ -420,6 +435,16 @@ config USB_OHCI_HCD_OMAP3 Enables support for the on-chip OHCI controller on OMAP3 and later chips. +config USB_OHCI_HCD_DAVINCI + bool "OHCI support for TI DaVinci DA8xx" + depends on ARCH_DAVINCI_DA8XX + depends on USB_OHCI_HCD=y + default y + help + Enables support for the DaVinci DA8xx integrated OHCI + controller. This driver cannot currently be a loadable + module because it lacks a proper PHY abstraction. + config USB_OHCI_ATH79 bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)" depends on (SOC_AR71XX || SOC_AR724X) @@ -584,7 +609,6 @@ config FHCI_DEBUG config USB_U132_HCD tristate "Elan U132 Adapter Host Controller" depends on USB_FTDI_ELAN - default M help The U132 adapter is a USB to CardBus adapter specifically designed for PC cards that contain an OHCI host controller. Typical PC cards |