diff options
Diffstat (limited to 'drivers/usb/host/Kconfig')
| -rw-r--r-- | drivers/usb/host/Kconfig | 430 |
1 files changed, 265 insertions, 165 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 83e58df29fe..03314f861be 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -2,11 +2,9 @@ # USB Host Controller Drivers # comment "USB Host Controller Drivers" - depends on USB config USB_C67X00_HCD tristate "Cypress C67x00 HCD support" - depends on USB help The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role host/peripheral/OTG USB controllers. @@ -18,8 +16,7 @@ config USB_C67X00_HCD module will be called c67x00. config USB_XHCI_HCD - tristate "xHCI HCD (USB 3.0) support (EXPERIMENTAL)" - depends on USB && USB_ARCH_HAS_XHCI && EXPERIMENTAL + tristate "xHCI HCD (USB 3.0) support" ---help--- The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. @@ -27,23 +24,23 @@ config USB_XHCI_HCD To compile this driver as a module, choose M here: the module will be called xhci-hcd. +if USB_XHCI_HCD + config USB_XHCI_PLATFORM tristate - depends on USB_XHCI_HCD -config USB_XHCI_HCD_DEBUGGING - bool "Debugging for the xHCI host controller" - depends on USB_XHCI_HCD +config USB_XHCI_MVEBU + tristate "xHCI support for Marvell Armada 375/38x" + select USB_XHCI_PLATFORM + depends on ARCH_MVEBU || COMPILE_TEST ---help--- - Say 'Y' to turn on debugging for the xHCI host controller driver. - This will spew debugging output, even in interrupt context. - This should only be used for debugging xHCI driver bugs. + Say 'Y' to enable the support for the xHCI host controller + found in Marvell Armada 375/38x ARM SOCs. - If unsure, say N. +endif # USB_XHCI_HCD config USB_EHCI_HCD tristate "EHCI HCD (USB 2.0) support" - depends on USB && USB_ARCH_HAS_EHCI ---help--- The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. @@ -65,7 +62,7 @@ config USB_EHCI_HCD config USB_EHCI_ROOT_HUB_TT bool "Root Hub Transaction Translators" - depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST + depends on USB_EHCI_HCD ---help--- Some EHCI chips have vendor-specific extensions to integrate transaction translators, so that no OHCI or UHCI companion @@ -77,7 +74,7 @@ config USB_EHCI_ROOT_HUB_TT config USB_EHCI_TT_NEWSCHED bool "Improved Transaction Translator scheduling" - depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST + depends on USB_EHCI_HCD default y ---help--- This changes the periodic scheduling code to fill more of the low @@ -95,9 +92,19 @@ config USB_EHCI_TT_NEWSCHED If unsure, say Y. +config USB_FSL_MPH_DR_OF + tristate + +if USB_EHCI_HCD + +config USB_EHCI_PCI + tristate + depends on PCI + default y + config USB_EHCI_HCD_PMC_MSP tristate "EHCI support for on-chip PMC MSP71xx USB controller" - depends on USB_EHCI_HCD && MSP_HAS_USB + depends on MSP_HAS_USB default n select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO @@ -105,24 +112,9 @@ config USB_EHCI_HCD_PMC_MSP Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's. If unsure, say N. -config USB_EHCI_BIG_ENDIAN_MMIO - bool - depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \ - ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ - PPC_MPC512x || CPU_CAVIUM_OCTEON || \ - PMC_MSP || SPARC_LEON || MIPS_SEAD3) - default y - -config USB_EHCI_BIG_ENDIAN_DESC - bool - depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ - PPC_MPC512x || PMC_MSP || SPARC_LEON || \ - MIPS_SEAD3) - default y - config XPS_USB_HCD_XILINX bool "Use Xilinx usb host EHCI controller core" - depends on USB_EHCI_HCD && (PPC32 || MICROBLAZE) + depends on (PPC32 || MICROBLAZE) select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO ---help--- @@ -131,37 +123,61 @@ config XPS_USB_HCD_XILINX support both high speed and full speed devices, or high speed devices only. -config USB_FSL_MPH_DR_OF - tristate - config USB_EHCI_FSL bool "Support for Freescale PPC on-chip EHCI USB controller" - depends on USB_EHCI_HCD && FSL_SOC + depends on FSL_SOC select USB_EHCI_ROOT_HUB_TT select USB_FSL_MPH_DR_OF if OF ---help--- Variation of ARC USB block used in some Freescale chips. config USB_EHCI_MXC - bool "Support for Freescale i.MX on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_MXC + tristate "Support for Freescale i.MX on-chip EHCI USB controller" + depends on ARCH_MXC select USB_EHCI_ROOT_HUB_TT ---help--- Variation of ARC USB block used in some Freescale chips. config USB_EHCI_HCD_OMAP - bool "EHCI support for OMAP3 and later chips" - depends on USB_EHCI_HCD && ARCH_OMAP + tristate "EHCI support for OMAP3 and later chips" + depends on ARCH_OMAP + select NOP_USB_XCEIV default y ---help--- Enables support for the on-chip EHCI controller on OMAP3 and later chips. +config USB_EHCI_HCD_ORION + tristate "Support for Marvell EBU on-chip EHCI USB controller" + depends on USB_EHCI_HCD && PLAT_ORION + default y + ---help--- + Enables support for the on-chip EHCI controller on Marvell's + embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP, + Armada 370. This is different from the EHCI implementation + on Marvell's mobile PXA and MMP SoC, see "EHCI support for + Marvell PXA/MMP USB controller" for those. + +config USB_EHCI_HCD_SPEAR + tristate "Support for ST SPEAr on-chip EHCI USB controller" + depends on USB_EHCI_HCD && PLAT_SPEAR + default y + ---help--- + Enables support for the on-chip EHCI controller on + ST SPEAr chips. + +config USB_EHCI_HCD_AT91 + tristate "Support for Atmel on-chip EHCI USB controller" + depends on USB_EHCI_HCD && ARCH_AT91 + default y + ---help--- + Enables support for the on-chip EHCI controller on + Atmel chips. + config USB_EHCI_MSM - bool "Support for MSM on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_MSM + tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller" + depends on ARCH_MSM || ARCH_QCOM select USB_EHCI_ROOT_HUB_TT - select USB_MSM_OTG ---help--- Enables support for the USB Host controller present on the Qualcomm chipsets. Root Hub has inbuilt TT. @@ -171,16 +187,17 @@ config USB_EHCI_MSM has an external PHY. config USB_EHCI_TEGRA - boolean "NVIDIA Tegra HCD support" - depends on USB_EHCI_HCD && ARCH_TEGRA + tristate "NVIDIA Tegra HCD support" + depends on ARCH_TEGRA select USB_EHCI_ROOT_HUB_TT + select USB_PHY help This driver enables support for the internal USB Host Controllers found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" - depends on USB_EHCI_HCD && PPC_OF + depends on PPC_OF default y ---help--- Enables support for the USB controller present on the PowerPC @@ -188,43 +205,51 @@ config USB_EHCI_HCD_PPC_OF config USB_EHCI_SH bool "EHCI support for SuperH USB controller" - depends on USB_EHCI_HCD && SUPERH + depends on SUPERH ---help--- Enables support for the on-chip EHCI controller on the SuperH. If you use the PCI EHCI controller, this option is not necessary. -config USB_EHCI_S5P - boolean "S5P EHCI support" - depends on USB_EHCI_HCD && PLAT_S5P +config USB_EHCI_EXYNOS + tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" + depends on PLAT_S5P || ARCH_EXYNOS help - Enable support for the S5P SOC's on-chip EHCI controller. + Enable support for the Samsung Exynos SOC's on-chip EHCI controller. config USB_EHCI_MV - bool "EHCI support for Marvell on-chip controller" - depends on USB_EHCI_HCD && (ARCH_PXA || ARCH_MMP) + bool "EHCI support for Marvell PXA/MMP USB controller" + depends on (ARCH_PXA || ARCH_MMP) select USB_EHCI_ROOT_HUB_TT ---help--- Enables support for Marvell (including PXA and MMP series) on-chip USB SPH and OTG controller. SPH is a single port host, and it can only be EHCI host. OTG is controller that can switch to host mode. + Note that this driver will not work on Marvell's other EHCI + controller used by the EBU-type SoCs including Orion, Kirkwood, + Dova, Armada 370 and Armada XP. See "Support for Marvell EBU + on-chip EHCI USB controller" for those. config USB_W90X900_EHCI - bool "W90X900(W90P910) EHCI support" - depends on USB_EHCI_HCD && ARCH_W90X900 + tristate "W90X900(W90P910) EHCI support" + depends on ARCH_W90X900 ---help--- Enables support for the W90X900 USB controller config USB_CNS3XXX_EHCI - bool "Cavium CNS3XXX EHCI Module" - depends on USB_EHCI_HCD && ARCH_CNS3XXX + bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" + depends on ARCH_CNS3XXX + select USB_EHCI_HCD_PLATFORM ---help--- + This option is deprecated now and the driver was removed, use + USB_EHCI_HCD_PLATFORM instead. + Enable support for the CNS3XXX SOC's on-chip EHCI controller. It is needed for high-speed (480Mbit/sec) USB 2.0 device support. config USB_EHCI_ATH79 bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)" - depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) + depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) select USB_EHCI_ROOT_HUB_TT select USB_EHCI_HCD_PLATFORM default y @@ -235,9 +260,30 @@ config USB_EHCI_ATH79 Enables support for the built-in EHCI controller present on the Atheros AR7XXX/AR9XXX SoCs. +config USB_EHCI_HCD_PLATFORM + tristate "Generic EHCI driver for a platform device" + default n + ---help--- + Adds an EHCI host driver for a generic platform device, which + provides a memory space and an irq. + + If unsure, say N. + +config USB_OCTEON_EHCI + bool "Octeon on-chip EHCI support" + depends on CAVIUM_OCTEON_SOC + default n + select USB_EHCI_BIG_ENDIAN_MMIO + help + Enable support for the Octeon II SOC's on-chip EHCI + controller. It is needed for high-speed (480Mbit/sec) + USB 2.0 device support. All CN6XXX based chips with USB are + supported. + +endif # USB_EHCI_HCD + config USB_OXU210HP_HCD tristate "OXU210HP HCD support" - depends on USB ---help--- The OXU210HP is an USB host/OTG/device controller. Enable this option if your board has this chip. If unsure, say N. @@ -250,7 +296,6 @@ config USB_OXU210HP_HCD config USB_ISP116X_HCD tristate "ISP116X HCD support" - depends on USB ---help--- The ISP1160 and ISP1161 chips are USB host controllers. Enable this option if your board has this chip. If unsure, say N. @@ -262,7 +307,6 @@ config USB_ISP116X_HCD config USB_ISP1760_HCD tristate "ISP 1760 HCD support" - depends on USB && EXPERIMENTAL ---help--- The ISP1760 chip is a USB 2.0 host controller. @@ -277,8 +321,6 @@ config USB_ISP1760_HCD config USB_ISP1362_HCD tristate "ISP1362 HCD support" - depends on USB - default N ---help--- Supports the Philips ISP1362 chip as a host controller @@ -287,12 +329,40 @@ config USB_ISP1362_HCD To compile this driver as a module, choose M here: the module will be called isp1362-hcd. +config USB_FUSBH200_HCD + tristate "FUSBH200 HCD support" + depends on USB + ---help--- + Faraday FUSBH200 is designed to meet USB2.0 EHCI specification + with minor modification. + + To compile this driver as a module, choose M here: the + module will be called fusbh200-hcd. + +config USB_FOTG210_HCD + tristate "FOTG210 HCD support" + depends on USB + ---help--- + Faraday FOTG210 is an OTG controller which can be configured as + an USB2.0 host. It is designed to meet USB2.0 EHCI specification + with minor modification. + + To compile this driver as a module, choose M here: the + module will be called fotg210-hcd. + +config USB_MAX3421_HCD + tristate "MAX3421 HCD (USB-over-SPI) support" + depends on USB && SPI + ---help--- + The Maxim MAX3421E chip supports standard USB 2.0-compliant + full-speed devices either in host or peripheral mode. This + driver supports the host-mode of the MAX3421E only. + + To compile this driver as a module, choose M here: the module will + be called max3421-hcd. + config USB_OHCI_HCD - tristate "OHCI HCD support" - depends on USB && USB_ARCH_HAS_OHCI - select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 - select USB_OTG_UTILS if ARCH_OMAP - select USB_ISP1301 if ARCH_LPC32XX || ARCH_PNX4008 + tristate "OHCI HCD (USB 1.1) support" ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's @@ -306,24 +376,78 @@ config USB_OHCI_HCD To compile this driver as a module, choose M here: the module will be called ohci-hcd. +if USB_OHCI_HCD + config USB_OHCI_HCD_OMAP1 - bool "OHCI support for OMAP1/2 chips" - depends on USB_OHCI_HCD && (ARCH_OMAP1 || ARCH_OMAP2) + tristate "OHCI support for OMAP1/2 chips" + depends on ARCH_OMAP1 + depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) default y ---help--- Enables support for the OHCI controller on OMAP1/2 chips. +config USB_OHCI_HCD_SPEAR + tristate "Support for ST SPEAr on-chip OHCI USB controller" + depends on USB_OHCI_HCD && PLAT_SPEAR + default y + ---help--- + Enables support for the on-chip OHCI controller on + ST SPEAr chips. + +config USB_OHCI_HCD_S3C2410 + tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" + depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX) + default y + ---help--- + Enables support for the on-chip OHCI controller on + S3C24xx/S3C64xx chips. + +config USB_OHCI_HCD_LPC32XX + tristate "Support for LPC on-chip OHCI USB controller" + depends on USB_OHCI_HCD && ARCH_LPC32XX + depends on USB_ISP1301 + default y + ---help--- + Enables support for the on-chip OHCI controller on + NXP chips. + +config USB_OHCI_HCD_PXA27X + tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller" + depends on USB_OHCI_HCD && (PXA27x || PXA3xx) + default y + ---help--- + Enables support for the on-chip OHCI controller on + PXA27x/PXA3xx chips. + +config USB_OHCI_HCD_AT91 + tristate "Support for Atmel on-chip OHCI USB controller" + depends on USB_OHCI_HCD && ARCH_AT91 + default y + ---help--- + Enables support for the on-chip OHCI controller on + Atmel chips. + config USB_OHCI_HCD_OMAP3 - bool "OHCI support for OMAP3 and later chips" - depends on USB_OHCI_HCD && (ARCH_OMAP3 || ARCH_OMAP4) + tristate "OHCI support for OMAP3 and later chips" + depends on (ARCH_OMAP3 || ARCH_OMAP4) default y ---help--- Enables support for the on-chip OHCI controller on OMAP3 and later chips. +config USB_OHCI_HCD_DAVINCI + bool "OHCI support for TI DaVinci DA8xx" + depends on ARCH_DAVINCI_DA8XX + depends on USB_OHCI_HCD=y + default y + help + Enables support for the DaVinci DA8xx integrated OHCI + controller. This driver cannot currently be a loadable + module because it lacks a proper PHY abstraction. + config USB_OHCI_ATH79 bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)" - depends on USB_OHCI_HCD && (SOC_AR71XX || SOC_AR724X) + depends on (SOC_AR71XX || SOC_AR724X) select USB_OHCI_HCD_PLATFORM default y help @@ -333,19 +457,9 @@ config USB_OHCI_ATH79 Enables support for the built-in OHCI controller present on the Atheros AR71XX/AR7240 SoCs. -config USB_OHCI_HCD_PPC_SOC - bool "OHCI support for on-chip PPC USB controller" - depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) - default y - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO - ---help--- - Enables support for the USB controller on the MPC52xx or - STB03xxx processor chip. If unsure, say Y. - config USB_OHCI_HCD_PPC_OF_BE bool "OHCI support for OF platform bus (big endian)" - depends on USB_OHCI_HCD && PPC_OF + depends on PPC_OF select USB_OHCI_BIG_ENDIAN_DESC select USB_OHCI_BIG_ENDIAN_MMIO ---help--- @@ -354,7 +468,7 @@ config USB_OHCI_HCD_PPC_OF_BE config USB_OHCI_HCD_PPC_OF_LE bool "OHCI support for OF platform bus (little endian)" - depends on USB_OHCI_HCD && PPC_OF + depends on PPC_OF select USB_OHCI_LITTLE_ENDIAN ---help--- Enables support for little-endian USB controllers present on the @@ -362,12 +476,12 @@ config USB_OHCI_HCD_PPC_OF_LE config USB_OHCI_HCD_PPC_OF bool - depends on USB_OHCI_HCD && PPC_OF + depends on PPC_OF default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE config USB_OHCI_HCD_PCI - bool "OHCI support for PCI-bus USB controllers" - depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF) + tristate "OHCI support for PCI-bus USB controllers" + depends on PCI default y select USB_OHCI_LITTLE_ENDIAN ---help--- @@ -376,7 +490,7 @@ config USB_OHCI_HCD_PCI config USB_OHCI_HCD_SSB bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)" - depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL + depends on (SSB = y || SSB = USB_OHCI_HCD) select USB_HCD_SSB select USB_OHCI_HCD_PLATFORM default n @@ -393,64 +507,58 @@ config USB_OHCI_HCD_SSB If unsure, say N. config USB_OHCI_SH - bool "OHCI support for SuperH USB controller" - depends on USB_OHCI_HCD && SUPERH + bool "OHCI support for SuperH USB controller (DEPRECATED)" + depends on SUPERH + select USB_OHCI_HCD_PLATFORM ---help--- + This option is deprecated now and the driver was removed, use + USB_OHCI_HCD_PLATFORM instead. + Enables support for the on-chip OHCI controller on the SuperH. If you use the PCI OHCI controller, this option is not necessary. config USB_OHCI_EXYNOS - boolean "OHCI support for Samsung EXYNOS SoC Series" - depends on USB_OHCI_HCD && ARCH_EXYNOS + tristate "OHCI support for Samsung S5P/EXYNOS SoC Series" + depends on PLAT_S5P || ARCH_EXYNOS help Enable support for the Samsung Exynos SOC's on-chip OHCI controller. config USB_CNS3XXX_OHCI - bool "Cavium CNS3XXX OHCI Module" - depends on USB_OHCI_HCD && ARCH_CNS3XXX + bool "Cavium CNS3XXX OHCI Module (DEPRECATED)" + depends on ARCH_CNS3XXX + select USB_OHCI_HCD_PLATFORM ---help--- + This option is deprecated now and the driver was removed, use + USB_OHCI_HCD_PLATFORM instead. + Enable support for the CNS3XXX SOC's on-chip OHCI controller. It is needed for low-speed USB 1.0 device support. config USB_OHCI_HCD_PLATFORM - bool "Generic OHCI driver for a platform device" - depends on USB_OHCI_HCD && EXPERIMENTAL + tristate "Generic OHCI driver for a platform device" default n ---help--- Adds an OHCI host driver for a generic platform device, which - provieds a memory space and an irq. + provides a memory space and an irq. If unsure, say N. -config USB_EHCI_HCD_PLATFORM - bool "Generic EHCI driver for a platform device" - depends on USB_EHCI_HCD && EXPERIMENTAL - default n - ---help--- - Adds an EHCI host driver for a generic platform device, which - provieds a memory space and an irq. - - If unsure, say N. - -config USB_OHCI_BIG_ENDIAN_DESC - bool - depends on USB_OHCI_HCD - default n - -config USB_OHCI_BIG_ENDIAN_MMIO - bool - depends on USB_OHCI_HCD - default n +config USB_OCTEON_OHCI + bool "Octeon on-chip OHCI support" + depends on CAVIUM_OCTEON_SOC + default USB_OCTEON_EHCI + select USB_OHCI_BIG_ENDIAN_MMIO + select USB_OHCI_LITTLE_ENDIAN + help + Enable support for the Octeon II SOC's on-chip OHCI + controller. It is needed for low-speed USB 1.0 device + support. All CN6XXX based chips with USB are supported. -config USB_OHCI_LITTLE_ENDIAN - bool - depends on USB_OHCI_HCD - default n if STB03xxx || PPC_MPC52xx - default y +endif # USB_OHCI_HCD config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" - depends on USB && (PCI || SPARC_LEON) + depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC ---help--- The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB @@ -467,22 +575,23 @@ config USB_UHCI_HCD config USB_UHCI_SUPPORT_NON_PCI_HC bool - depends on USB_UHCI_HCD - default y if SPARC_LEON + default y if (SPARC_LEON || USB_UHCI_PLATFORM) + +config USB_UHCI_PLATFORM + bool + default y if ARCH_VT8500 config USB_UHCI_BIG_ENDIAN_MMIO bool - depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON - default y + default y if SPARC_LEON config USB_UHCI_BIG_ENDIAN_DESC bool - depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON - default y + default y if SPARC_LEON config USB_FHCI_HCD tristate "Freescale QE USB Host Controller support" - depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE + depends on OF_GPIO && QE_GPIO && QUICC_ENGINE select FSL_GTM select QE_USB help @@ -499,8 +608,7 @@ config FHCI_DEBUG config USB_U132_HCD tristate "Elan U132 Adapter Host Controller" - depends on USB && USB_FTDI_ELAN - default M + depends on USB_FTDI_ELAN help The U132 adapter is a USB to CardBus adapter specifically designed for PC cards that contain an OHCI host controller. Typical PC cards @@ -527,7 +635,6 @@ config USB_U132_HCD config USB_SL811_HCD tristate "SL811HS HCD support" - depends on USB help The SL811HS is a single-port USB controller that supports either host side or peripheral side roles. Enable this option if your @@ -559,7 +666,6 @@ config USB_SL811_CS config USB_R8A66597_HCD tristate "R8A66597 HCD support" - depends on USB help The R8A66597 is a USB 2.0 host and peripheral controller. @@ -571,7 +677,6 @@ config USB_R8A66597_HCD config USB_RENESAS_USBHS_HCD tristate "Renesas USBHS HCD support" - depends on USB depends on USB_RENESAS_USBHS help The Renesas USBHS is a USB 2.0 host and peripheral controller. @@ -583,8 +688,7 @@ config USB_RENESAS_USBHS_HCD module will be called renesas-usbhs. config USB_WHCI_HCD - tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Wireless USB Host Controller Interface (WHCI) driver" depends on PCI && USB && UWB select USB_WUSB select UWB_WHCI @@ -596,9 +700,8 @@ config USB_WHCI_HCD will be called "whci-hcd". config USB_HWA_HCD - tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)" - depends on EXPERIMENTAL - depends on USB && UWB + tristate "Host Wire Adapter (HWA) driver" + depends on UWB select USB_WUSB select UWB_HWA help @@ -612,7 +715,7 @@ config USB_HWA_HCD config USB_IMX21_HCD tristate "i.MX21 HCD support" - depends on USB && ARM && ARCH_MXC + depends on ARM && ARCH_MXC help This driver enables support for the on-chip USB host in the i.MX21 processor. @@ -620,27 +723,7 @@ config USB_IMX21_HCD To compile this driver as a module, choose M here: the module will be called "imx21-hcd". -config USB_OCTEON_EHCI - bool "Octeon on-chip EHCI support" - depends on USB && USB_EHCI_HCD && CPU_CAVIUM_OCTEON - default n - select USB_EHCI_BIG_ENDIAN_MMIO - help - Enable support for the Octeon II SOC's on-chip EHCI - controller. It is needed for high-speed (480Mbit/sec) - USB 2.0 device support. All CN6XXX based chips with USB are - supported. -config USB_OCTEON_OHCI - bool "Octeon on-chip OHCI support" - depends on USB && USB_OHCI_HCD && CPU_CAVIUM_OCTEON - default USB_OCTEON_EHCI - select USB_OHCI_BIG_ENDIAN_MMIO - select USB_OHCI_LITTLE_ENDIAN - help - Enable support for the Octeon II SOC's on-chip OHCI - controller. It is needed for low-speed USB 1.0 device - support. All CN6XXX based chips with USB are supported. config USB_OCTEON2_COMMON bool @@ -648,11 +731,11 @@ config USB_OCTEON2_COMMON config USB_HCD_BCMA tristate "BCMA usb host driver" - depends on BCMA && EXPERIMENTAL + depends on BCMA select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD help - Enbale support for the EHCI and OCHI host controller on an bcma bus. + Enable support for the EHCI and OCHI host controller on an bcma bus. It converts the bcma driver into two platform device drivers for ehci and ohci. @@ -660,12 +743,29 @@ config USB_HCD_BCMA config USB_HCD_SSB tristate "SSB usb host driver" - depends on SSB && EXPERIMENTAL + depends on SSB select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD help - Enbale support for the EHCI and OCHI host controller on an bcma bus. + Enable support for the EHCI and OCHI host controller on an bcma bus. It converts the bcma driver into two platform device drivers for ehci and ohci. If unsure, say N. + +config USB_HCD_TEST_MODE + bool "HCD test mode support" + ---help--- + Say 'Y' to enable additional software test modes that may be + supported by the host controller drivers. + + One such test mode is the Embedded High-speed Host Electrical Test + (EHSET) for EHCI host controller hardware, specifically the "Single + Step Set Feature" test. Typically this will be enabled for On-the-Go + or embedded hosts that need to undergo USB-IF compliance testing with + the aid of special testing hardware. In the future, this may expand + to include other tests that require support from a HCD driver. + + This option is of interest only to developers who need to validate + their USB hardware designs. It is not needed for normal use. If + unsure, say N. |