diff options
Diffstat (limited to 'drivers/usb/gadget/u_ether.h')
| -rw-r--r-- | drivers/usb/gadget/u_ether.h | 216 |
1 files changed, 182 insertions, 34 deletions
diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h index 3c8c0c9f9d7..0f0290acea7 100644 --- a/drivers/usb/gadget/u_ether.h +++ b/drivers/usb/gadget/u_ether.h @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __U_ETHER_H @@ -30,6 +21,27 @@ #include "gadget_chips.h" +#define QMULT_DEFAULT 5 + +/* + * dev_addr: initial value + * changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" + * host_addr: this address is invisible to ifconfig + */ +#define USB_ETHERNET_MODULE_PARAMETERS() \ + static unsigned qmult = QMULT_DEFAULT; \ + module_param(qmult, uint, S_IRUGO|S_IWUSR); \ + MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed");\ + \ + static char *dev_addr; \ + module_param(dev_addr, charp, S_IRUGO); \ + MODULE_PARM_DESC(dev_addr, "Device Ethernet Address"); \ + \ + static char *host_addr; \ + module_param(host_addr, charp, S_IRUGO); \ + MODULE_PARM_DESC(host_addr, "Host Ethernet Address") + +struct eth_dev; /* * This represents the USB side of an "ethernet" link, managed by a USB @@ -52,16 +64,16 @@ struct gether { struct usb_ep *in_ep; struct usb_ep *out_ep; - /* descriptors match device speed at gether_connect() time */ - struct usb_endpoint_descriptor *in; - struct usb_endpoint_descriptor *out; - bool is_zlp_ok; u16 cdc_filter; /* hooks for added framing, as needed for RNDIS and EEM. */ u32 header_len; + /* NCM requires fixed size bundles */ + bool is_fixed; + u32 fixed_out_len; + u32 fixed_in_len; struct sk_buff *(*wrap)(struct gether *port, struct sk_buff *skb); int (*unwrap)(struct gether *port, @@ -78,10 +90,165 @@ struct gether { |USB_CDC_PACKET_TYPE_PROMISCUOUS \ |USB_CDC_PACKET_TYPE_DIRECTED) +/* variant of gether_setup that allows customizing network device name */ +struct eth_dev *gether_setup_name(struct usb_gadget *g, + const char *dev_addr, const char *host_addr, + u8 ethaddr[ETH_ALEN], unsigned qmult, const char *netname); /* netdev setup/teardown as directed by the gadget driver */ -int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN]); -void gether_cleanup(void); +/* gether_setup - initialize one ethernet-over-usb link + * @g: gadget to associated with these links + * @ethaddr: NULL, or a buffer in which the ethernet address of the + * host side of the link is recorded + * Context: may sleep + * + * This sets up the single network link that may be exported by a + * gadget driver using this framework. The link layer addresses are + * set up using module parameters. + * + * Returns a eth_dev pointer on success, or an ERR_PTR on failure + */ +static inline struct eth_dev *gether_setup(struct usb_gadget *g, + const char *dev_addr, const char *host_addr, + u8 ethaddr[ETH_ALEN], unsigned qmult) +{ + return gether_setup_name(g, dev_addr, host_addr, ethaddr, qmult, "usb"); +} + +/* + * variant of gether_setup_default that allows customizing + * network device name + */ +struct net_device *gether_setup_name_default(const char *netname); + +/* + * gether_register_netdev - register the net device + * @net: net device to register + * + * Registers the net device associated with this ethernet-over-usb link + * + */ +int gether_register_netdev(struct net_device *net); + +/* gether_setup_default - initialize one ethernet-over-usb link + * Context: may sleep + * + * This sets up the single network link that may be exported by a + * gadget driver using this framework. The link layer addresses + * are set to random values. + * + * Returns negative errno, or zero on success + */ +static inline struct net_device *gether_setup_default(void) +{ + return gether_setup_name_default("usb"); +} + +/** + * gether_set_gadget - initialize one ethernet-over-usb link with a gadget + * @net: device representing this link + * @g: the gadget to initialize with + * + * This associates one ethernet-over-usb link with a gadget. + */ +void gether_set_gadget(struct net_device *net, struct usb_gadget *g); + +/** + * gether_set_dev_addr - initialize an ethernet-over-usb link with eth address + * @net: device representing this link + * @dev_addr: eth address of this device + * + * This sets the device-side Ethernet address of this ethernet-over-usb link + * if dev_addr is correct. + * Returns negative errno if the new address is incorrect. + */ +int gether_set_dev_addr(struct net_device *net, const char *dev_addr); + +/** + * gether_get_dev_addr - get an ethernet-over-usb link eth address + * @net: device representing this link + * @dev_addr: place to store device's eth address + * @len: length of the @dev_addr buffer + * + * This gets the device-side Ethernet address of this ethernet-over-usb link. + * Returns zero on success, else negative errno. + */ +int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len); + +/** + * gether_set_host_addr - initialize an ethernet-over-usb link with host address + * @net: device representing this link + * @host_addr: eth address of the host + * + * This sets the host-side Ethernet address of this ethernet-over-usb link + * if host_addr is correct. + * Returns negative errno if the new address is incorrect. + */ +int gether_set_host_addr(struct net_device *net, const char *host_addr); + +/** + * gether_get_host_addr - get an ethernet-over-usb link host address + * @net: device representing this link + * @host_addr: place to store eth address of the host + * @len: length of the @host_addr buffer + * + * This gets the host-side Ethernet address of this ethernet-over-usb link. + * Returns zero on success, else negative errno. + */ +int gether_get_host_addr(struct net_device *net, char *host_addr, int len); + +/** + * gether_get_host_addr_cdc - get an ethernet-over-usb link host address + * @net: device representing this link + * @host_addr: place to store eth address of the host + * @len: length of the @host_addr buffer + * + * This gets the CDC formatted host-side Ethernet address of this + * ethernet-over-usb link. + * Returns zero on success, else negative errno. + */ +int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len); + +/** + * gether_get_host_addr_u8 - get an ethernet-over-usb link host address + * @net: device representing this link + * @host_mac: place to store the eth address of the host + * + * This gets the binary formatted host-side Ethernet address of this + * ethernet-over-usb link. + */ +void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN]); + +/** + * gether_set_qmult - initialize an ethernet-over-usb link with a multiplier + * @net: device representing this link + * @qmult: queue multiplier + * + * This sets the queue length multiplier of this ethernet-over-usb link. + * For higher speeds use longer queues. + */ +void gether_set_qmult(struct net_device *net, unsigned qmult); + +/** + * gether_get_qmult - get an ethernet-over-usb link multiplier + * @net: device representing this link + * + * This gets the queue length multiplier of this ethernet-over-usb link. + */ +unsigned gether_get_qmult(struct net_device *net); + +/** + * gether_get_ifname - get an ethernet-over-usb link interface name + * @net: device representing this link + * @name: place to store the interface name + * @len: length of the @name buffer + * + * This gets the interface name of this ethernet-over-usb link. + * Returns zero on success, else negative errno. + */ +int gether_get_ifname(struct net_device *net, char *name, int len); + +void gether_cleanup(struct eth_dev *dev); /* connect/disconnect is handled by individual functions */ struct net_device *gether_connect(struct gether *); @@ -100,23 +267,4 @@ static inline bool can_support_ecm(struct usb_gadget *gadget) return true; } -/* each configuration may bind one instance of an ethernet link */ -int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); -int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); -int eem_bind_config(struct usb_configuration *c); - -#ifdef USB_ETH_RNDIS - -int rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); - -#else - -static inline int -rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) -{ - return 0; -} - -#endif - #endif /* __U_ETHER_H */ |