diff options
Diffstat (limited to 'drivers/usb/gadget/net2280.c')
| -rw-r--r-- | drivers/usb/gadget/net2280.c | 639 |
1 files changed, 285 insertions, 354 deletions
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index c32e1f7476d..300b3a71383 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -2,14 +2,14 @@ * Driver for the PLX NET2280 USB device controller. * Specs and errata are available from <http://www.plxtech.com>. * - * PLX Technology Inc. (formerly NetChip Technology) supported the + * PLX Technology Inc. (formerly NetChip Technology) supported the * development of this driver. * * * CODE STATUS HIGHLIGHTS * * This driver should work well with most "gadget" drivers, including - * the File Storage, Serial, and Ethernet/RNDIS gadget drivers + * the Mass Storage, Serial, and Ethernet/RNDIS gadget drivers * as well as Gadget Zero and Gadgetfs. * * DMA is enabled by default. Drivers using transfer queues might use @@ -26,33 +26,25 @@ * Copyright (C) 2003 David Brownell * Copyright (C) 2003-2005 PLX Technology, Inc. * + * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility + * with 2282 chip + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #undef DEBUG /* messages on error and most fault paths */ #undef VERBOSE /* extra debug messages (success too) */ -#include <linux/config.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/dma-mapping.h> #include <linux/kernel.h> #include <linux/delay.h> #include <linux/ioport.h> -#include <linux/sched.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> @@ -60,20 +52,19 @@ #include <linux/interrupt.h> #include <linux/moduleparam.h> #include <linux/device.h> -#include <linux/usb_ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/prefetch.h> #include <asm/byteorder.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/system.h> #include <asm/unaligned.h> -#define DRIVER_DESC "PLX NET2280 USB Peripheral Controller" -#define DRIVER_VERSION "2005 Feb 03" +#define DRIVER_DESC "PLX NET228x USB Peripheral Controller" +#define DRIVER_VERSION "2005 Sept 27" -#define DMA_ADDR_INVALID (~(dma_addr_t)0) #define EP_DONTUSE 13 /* nonzero */ #define USE_RDK_LEDS /* GPIO pins control three LEDs */ @@ -83,7 +74,7 @@ static const char driver_name [] = "net2280"; static const char driver_desc [] = DRIVER_DESC; static const char ep0name [] = "ep0"; -static const char *ep_name [] = { +static const char *const ep_name [] = { ep0name, "ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f", @@ -97,8 +88,8 @@ static const char *ep_name [] = { * Some gadget drivers work better with the dma support here than others. * These two parameters let you use PIO or more aggressive DMA. */ -static int use_dma = 1; -static int use_dma_chaining = 0; +static bool use_dma = 1; +static bool use_dma_chaining = 0; /* "modprobe net2280 use_dma=n" etc */ module_param (use_dma, bool, S_IRUGO); @@ -116,14 +107,18 @@ module_param (fifo_mode, ushort, 0644); /* enable_suspend -- When enabled, the driver will respond to * USB suspend requests by powering down the NET2280. Otherwise, - * USB suspend requests will be ignored. This is acceptible for - * self-powered devices, and helps avoid some quirks. + * USB suspend requests will be ignored. This is acceptable for + * self-powered devices */ -static int enable_suspend = 0; +static bool enable_suspend = 0; /* "modprobe net2280 enable_suspend=1" etc */ module_param (enable_suspend, bool, S_IRUGO); +/* force full-speed operation */ +static bool full_speed; +module_param(full_speed, bool, 0444); +MODULE_PARM_DESC(full_speed, "force full-speed mode -- for testing only!"); #define DIR_STRING(bAddress) (((bAddress) & USB_DIR_IN) ? "in" : "out") @@ -134,15 +129,15 @@ static char *type_string (u8 bmAttributes) case USB_ENDPOINT_XFER_BULK: return "bulk"; case USB_ENDPOINT_XFER_ISOC: return "iso"; case USB_ENDPOINT_XFER_INT: return "intr"; - }; + } return "control"; } #endif #include "net2280.h" -#define valid_bit __constant_cpu_to_le32 (1 << VALID_BIT) -#define dma_done_ie __constant_cpu_to_le32 (1 << DMA_DONE_INTERRUPT_ENABLE) +#define valid_bit cpu_to_le32 (1 << VALID_BIT) +#define dma_done_ie cpu_to_le32 (1 << DMA_DONE_INTERRUPT_ENABLE) /*-------------------------------------------------------------------------*/ @@ -167,7 +162,7 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) return -EDOM; /* sanity check ep-e/ep-f since their fifos are small */ - max = le16_to_cpu (desc->wMaxPacketSize) & 0x1fff; + max = usb_endpoint_maxp (desc) & 0x1fff; if (ep->num > 4 && max > 64) return -ERANGE; @@ -177,6 +172,7 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) /* ep_reset() has already been called */ ep->stopped = 0; + ep->wedged = 0; ep->out_overflow = 0; /* set speed-dependent max packet; may kick in high bandwidth */ @@ -222,6 +218,13 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) ep->is_in = (tmp & USB_DIR_IN) != 0; if (!ep->is_in) writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); + else if (dev->pdev->device != 0x2280) { + /* Added for 2282, Don't use nak packets on an in endpoint, + * this was ignored on 2280 + */ + writel ((1 << CLEAR_NAK_OUT_PACKETS) + | (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp); + } writel (tmp, &ep->regs->ep_cfg); @@ -231,8 +234,9 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) writel (tmp, &dev->regs->pciirqenb0); tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) - | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE) - | readl (&ep->regs->ep_irqenb); + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE); + if (dev->pdev->device == 0x2280) + tmp |= readl (&ep->regs->ep_irqenb); writel (tmp, &ep->regs->ep_irqenb); } else { /* dma, per-request */ tmp = (1 << (8 + ep->num)); /* completion */ @@ -280,7 +284,7 @@ static int handshake (u32 __iomem *ptr, u32 mask, u32 done, int usec) return -ETIMEDOUT; } -static struct usb_ep_ops net2280_ep_ops; +static const struct usb_ep_ops net2280_ep_ops; static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep) { @@ -289,7 +293,7 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep) ep->desc = NULL; INIT_LIST_HEAD (&ep->queue); - ep->ep.maxpacket = ~0; + usb_ep_set_maxpacket_limit(&ep->ep, ~0); ep->ep.ops = &net2280_ep_ops; /* disable the dma, irqs, endpoint... */ @@ -313,10 +317,18 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep) /* init to our chosen defaults, notably so that we NAK OUT * packets until the driver queues a read (+note erratum 0112) */ - tmp = (1 << SET_NAK_OUT_PACKETS_MODE) + if (!ep->is_in || ep->dev->pdev->device == 0x2280) { + tmp = (1 << SET_NAK_OUT_PACKETS_MODE) | (1 << SET_NAK_OUT_PACKETS) | (1 << CLEAR_EP_HIDE_STATUS_PHASE) | (1 << CLEAR_INTERRUPT_MODE); + } else { + /* added for 2282 */ + tmp = (1 << CLEAR_NAK_OUT_PACKETS_MODE) + | (1 << CLEAR_NAK_OUT_PACKETS) + | (1 << CLEAR_EP_HIDE_STATUS_PHASE) + | (1 << CLEAR_INTERRUPT_MODE); + } if (ep->num != 0) { tmp |= (1 << CLEAR_ENDPOINT_TOGGLE) @@ -325,14 +337,18 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep) writel (tmp, &ep->regs->ep_rsp); /* scrub most status bits, and flush any fifo state */ - writel ( (1 << TIMEOUT) + if (ep->dev->pdev->device == 0x2280) + tmp = (1 << FIFO_OVERFLOW) + | (1 << FIFO_UNDERFLOW); + else + tmp = 0; + + writel (tmp | (1 << TIMEOUT) | (1 << USB_STALL_SENT) | (1 << USB_IN_NAK_SENT) | (1 << USB_IN_ACK_RCVD) | (1 << USB_OUT_PING_NAK_SENT) | (1 << USB_OUT_ACK_SENT) - | (1 << FIFO_OVERFLOW) - | (1 << FIFO_UNDERFLOW) | (1 << FIFO_FLUSH) | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT) | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) @@ -385,12 +401,10 @@ net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) return NULL; ep = container_of (_ep, struct net2280_ep, ep); - req = kmalloc (sizeof *req, gfp_flags); + req = kzalloc(sizeof(*req), gfp_flags); if (!req) return NULL; - memset (req, 0, sizeof *req); - req->req.dma = DMA_ADDR_INVALID; INIT_LIST_HEAD (&req->queue); /* this dma descriptor may be swapped with the previous dummy */ @@ -404,7 +418,6 @@ net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) return NULL; } td->dmacount = 0; /* not VALID */ - td->dmaaddr = __constant_cpu_to_le32 (DMA_ADDR_INVALID); td->dmadesc = td->dmaaddr; req->td = td; } @@ -430,91 +443,6 @@ net2280_free_request (struct usb_ep *_ep, struct usb_request *_req) /*-------------------------------------------------------------------------*/ -#undef USE_KMALLOC - -/* many common platforms have dma-coherent caches, which means that it's - * safe to use kmalloc() memory for all i/o buffers without using any - * cache flushing calls. (unless you're trying to share cache lines - * between dma and non-dma activities, which is a slow idea in any case.) - * - * other platforms need more care, with 2.5 having a moderately general - * solution (which falls down for allocations smaller than one page) - * that improves significantly on the 2.4 PCI allocators by removing - * the restriction that memory never be freed in_interrupt(). - */ -#if defined(CONFIG_X86) -#define USE_KMALLOC - -#elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE) -#define USE_KMALLOC - -#elif defined(CONFIG_MIPS) && !defined(CONFIG_DMA_NONCOHERENT) -#define USE_KMALLOC - -/* FIXME there are other cases, including an x86-64 one ... */ -#endif - -/* allocating buffers this way eliminates dma mapping overhead, which - * on some platforms will mean eliminating a per-io buffer copy. with - * some kinds of system caches, further tweaks may still be needed. - */ -static void * -net2280_alloc_buffer ( - struct usb_ep *_ep, - unsigned bytes, - dma_addr_t *dma, - gfp_t gfp_flags -) -{ - void *retval; - struct net2280_ep *ep; - - ep = container_of (_ep, struct net2280_ep, ep); - if (!_ep) - return NULL; - *dma = DMA_ADDR_INVALID; - -#if defined(USE_KMALLOC) - retval = kmalloc(bytes, gfp_flags); - if (retval) - *dma = virt_to_phys(retval); -#else - if (ep->dma) { - /* the main problem with this call is that it wastes memory - * on typical 1/N page allocations: it allocates 1-N pages. - */ -#warning Using dma_alloc_coherent even with buffers smaller than a page. - retval = dma_alloc_coherent(&ep->dev->pdev->dev, - bytes, dma, gfp_flags); - } else - retval = kmalloc(bytes, gfp_flags); -#endif - return retval; -} - -static void -net2280_free_buffer ( - struct usb_ep *_ep, - void *buf, - dma_addr_t dma, - unsigned bytes -) { - /* free memory into the right allocator */ -#ifndef USE_KMALLOC - if (dma != DMA_ADDR_INVALID) { - struct net2280_ep *ep; - - ep = container_of(_ep, struct net2280_ep, ep); - if (!_ep) - return; - dma_free_coherent(&ep->dev->pdev->dev, bytes, buf, dma); - } else -#endif - kfree (buf); -} - -/*-------------------------------------------------------------------------*/ - /* load a packet into the fifo we use for usb IN transfers. * works for all endpoints. * @@ -718,7 +646,8 @@ fill_dma_desc (struct net2280_ep *ep, struct net2280_request *req, int valid) */ if (ep->is_in) dmacount |= (1 << DMA_DIRECTION); - else if ((dmacount % ep->ep.maxpacket) != 0) + if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) + || ep->dev->pdev->device != 0x2280) dmacount |= (1 << END_OF_CHAIN); req->valid = valid; @@ -732,7 +661,7 @@ fill_dma_desc (struct net2280_ep *ep, struct net2280_request *req, int valid) /* 2280 may be polling VALID_BIT through ep->dma->dmadesc */ wmb (); - td->dmacount = cpu_to_le32p (&dmacount); + td->dmacount = cpu_to_le32(dmacount); } static const u32 dmactl_default = @@ -760,9 +689,12 @@ static inline void stop_dma (struct net2280_dma_regs __iomem *dma) static void start_queue (struct net2280_ep *ep, u32 dmactl, u32 td_dma) { struct net2280_dma_regs __iomem *dma = ep->dma; + unsigned int tmp = (1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION); - writel ((1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION), - &dma->dmacount); + if (ep->dev->pdev->device != 0x2280) + tmp |= (1 << END_OF_CHAIN); + + writel (tmp, &dma->dmacount); writel (readl (&dma->dmastat), &dma->dmastat); writel (td_dma, &dma->dmadesc); @@ -790,7 +722,7 @@ static void start_dma (struct net2280_ep *ep, struct net2280_request *req) /* previous OUT packet might have been short */ if (!ep->is_in && ((tmp = readl (&ep->regs->ep_stat)) - & (1 << NAK_OUT_PACKETS)) != 0) { + & (1 << NAK_OUT_PACKETS)) != 0) { writel ((1 << SHORT_PACKET_TRANSFERRED_INTERRUPT), &ep->regs->ep_stat); @@ -835,7 +767,7 @@ static void start_dma (struct net2280_ep *ep, struct net2280_request *req) fill_dma_desc (ep, req, 1); if (!use_dma_chaining) - req->td->dmacount |= __constant_cpu_to_le32 (1 << END_OF_CHAIN); + req->td->dmacount |= cpu_to_le32 (1 << END_OF_CHAIN); start_queue (ep, tmp, req->td_dma); } @@ -874,12 +806,8 @@ done (struct net2280_ep *ep, struct net2280_request *req, int status) status = req->req.status; dev = ep->dev; - if (req->mapped) { - pci_unmap_single (dev->pdev, req->req.dma, req->req.length, - ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); - req->req.dma = DMA_ADDR_INVALID; - req->mapped = 0; - } + if (ep->dma) + usb_gadget_unmap_request(&dev->gadget, &req->req, ep->is_in); if (status && status != -ESHUTDOWN) VDEBUG (dev, "complete %s req %p stat %d len %u/%u\n", @@ -925,10 +853,13 @@ net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) return -EOPNOTSUPP; /* set up dma mapping in case the caller didn't */ - if (ep->dma && _req->dma == DMA_ADDR_INVALID) { - _req->dma = pci_map_single (dev->pdev, _req->buf, _req->length, - ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); - req->mapped = 1; + if (ep->dma) { + int ret; + + ret = usb_gadget_map_request(&dev->gadget, _req, + ep->is_in); + if (ret) + return ret; } #if 0 @@ -1005,6 +936,7 @@ net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) } /* else the irq handler advances the queue. */ + ep->responded = 1; if (req) list_add_tail (&req->queue, &ep->queue); done: @@ -1067,7 +999,7 @@ static void scan_dma_completions (struct net2280_ep *ep) * 0122, and 0124; not all cases trigger the warning. */ if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) { - WARN (ep->dev, "%s lost packet sync!\n", + WARNING (ep->dev, "%s lost packet sync!\n", ep->ep.name); req->req.status = -EOVERFLOW; } else if ((tmp = readl (&ep->regs->ep_avail)) != 0) { @@ -1278,7 +1210,7 @@ static int net2280_dequeue (struct usb_ep *_ep, struct usb_request *_req) static int net2280_fifo_status (struct usb_ep *_ep); static int -net2280_set_halt (struct usb_ep *_ep, int value) +net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) { struct net2280_ep *ep; unsigned long flags; @@ -1299,16 +1231,21 @@ net2280_set_halt (struct usb_ep *_ep, int value) else if (ep->is_in && value && net2280_fifo_status (_ep) != 0) retval = -EAGAIN; else { - VDEBUG (ep->dev, "%s %s halt\n", _ep->name, - value ? "set" : "clear"); + VDEBUG (ep->dev, "%s %s %s\n", _ep->name, + value ? "set" : "clear", + wedged ? "wedge" : "halt"); /* set/clear, then synch memory views with the device */ if (value) { if (ep->num == 0) ep->dev->protocol_stall = 1; else set_halt (ep); - } else + if (wedged) + ep->wedged = 1; + } else { clear_halt (ep); + ep->wedged = 0; + } (void) readl (&ep->regs->ep_rsp); } spin_unlock_irqrestore (&ep->dev->lock, flags); @@ -1317,6 +1254,20 @@ net2280_set_halt (struct usb_ep *_ep, int value) } static int +net2280_set_halt(struct usb_ep *_ep, int value) +{ + return net2280_set_halt_and_wedge(_ep, value, 0); +} + +static int +net2280_set_wedge(struct usb_ep *_ep) +{ + if (!_ep || _ep->name == ep0name) + return -EINVAL; + return net2280_set_halt_and_wedge(_ep, 1, 1); +} + +static int net2280_fifo_status (struct usb_ep *_ep) { struct net2280_ep *ep; @@ -1351,20 +1302,18 @@ net2280_fifo_flush (struct usb_ep *_ep) (void) readl (&ep->regs->ep_rsp); } -static struct usb_ep_ops net2280_ep_ops = { +static const struct usb_ep_ops net2280_ep_ops = { .enable = net2280_enable, .disable = net2280_disable, .alloc_request = net2280_alloc_request, .free_request = net2280_free_request, - .alloc_buffer = net2280_alloc_buffer, - .free_buffer = net2280_free_buffer, - .queue = net2280_queue, .dequeue = net2280_dequeue, .set_halt = net2280_set_halt, + .set_wedge = net2280_set_wedge, .fifo_status = net2280_fifo_status, .fifo_flush = net2280_fifo_flush, }; @@ -1451,11 +1400,18 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on) return 0; } +static int net2280_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver); +static int net2280_stop(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver); + static const struct usb_gadget_ops net2280_ops = { .get_frame = net2280_get_frame, .wakeup = net2280_wakeup, .set_selfpowered = net2280_set_selfpowered, .pullup = net2280_pullup, + .udc_start = net2280_start, + .udc_stop = net2280_stop, }; /*-------------------------------------------------------------------------*/ @@ -1468,8 +1424,8 @@ static const struct usb_gadget_ops net2280_ops = { */ /* "function" sysfs attribute */ -static ssize_t -show_function (struct device *_dev, struct device_attribute *attr, char *buf) +static ssize_t function_show(struct device *_dev, struct device_attribute *attr, + char *buf) { struct net2280 *dev = dev_get_drvdata (_dev); @@ -1479,10 +1435,10 @@ show_function (struct device *_dev, struct device_attribute *attr, char *buf) return 0; return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function); } -static DEVICE_ATTR (function, S_IRUGO, show_function, NULL); +static DEVICE_ATTR_RO(function); -static ssize_t -show_registers (struct device *_dev, struct device_attribute *attr, char *buf) +static ssize_t registers_show(struct device *_dev, + struct device_attribute *attr, char *buf) { struct net2280 *dev; char *next; @@ -1609,7 +1565,7 @@ show_registers (struct device *_dev, struct device_attribute *attr, char *buf) } /* Indexed Registers */ - // none yet + // none yet /* Statistics */ t = scnprintf (next, size, "\nirqs: "); @@ -1634,10 +1590,10 @@ show_registers (struct device *_dev, struct device_attribute *attr, char *buf) return PAGE_SIZE - size; } -static DEVICE_ATTR (registers, S_IRUGO, show_registers, NULL); +static DEVICE_ATTR_RO(registers); -static ssize_t -show_queues (struct device *_dev, struct device_attribute *attr, char *buf) +static ssize_t queues_show(struct device *_dev, struct device_attribute *attr, + char *buf) { struct net2280 *dev; char *next; @@ -1669,13 +1625,13 @@ show_queues (struct device *_dev, struct device_attribute *attr, char *buf) ({ char *val; switch (d->bmAttributes & 0x03) { case USB_ENDPOINT_XFER_BULK: - val = "bulk"; break; + val = "bulk"; break; case USB_ENDPOINT_XFER_INT: - val = "intr"; break; + val = "intr"; break; default: - val = "iso"; break; - }; val; }), - le16_to_cpu (d->wMaxPacketSize) & 0x1fff, + val = "iso"; break; + } val; }), + usb_endpoint_maxp (d) & 0x1fff, ep->dma ? "dma" : "pio", ep->fifo_size ); } else /* ep0 should only have one transfer queued */ @@ -1734,13 +1690,13 @@ done: spin_unlock_irqrestore (&dev->lock, flags); return PAGE_SIZE - size; } -static DEVICE_ATTR (queues, S_IRUGO, show_queues, NULL); +static DEVICE_ATTR_RO(queues); #else -#define device_create_file(a,b) do {} while (0) -#define device_remove_file device_create_file +#define device_create_file(a,b) (0) +#define device_remove_file(a,b) do { } while (0) #endif @@ -1779,62 +1735,6 @@ static void set_fifo_mode (struct net2280 *dev, int mode) list_add_tail (&dev->ep [6].ep.ep_list, &dev->gadget.ep_list); } -/* just declare this in any driver that really need it */ -extern int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode); - -/** - * net2280_set_fifo_mode - change allocation of fifo buffers - * @gadget: access to the net2280 device that will be updated - * @mode: 0 for default, four 1kB buffers (ep-a through ep-d); - * 1 for two 2kB buffers (ep-a and ep-b only); - * 2 for one 2kB buffer (ep-a) and two 1kB ones (ep-b, ep-c). - * - * returns zero on success, else negative errno. when this succeeds, - * the contents of gadget->ep_list may have changed. - * - * you may only call this function when endpoints a-d are all disabled. - * use it whenever extra hardware buffering can help performance, such - * as before enabling "high bandwidth" interrupt endpoints that use - * maxpacket bigger than 512 (when double buffering would otherwise - * be unavailable). - */ -int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode) -{ - int i; - struct net2280 *dev; - int status = 0; - unsigned long flags; - - if (!gadget) - return -ENODEV; - dev = container_of (gadget, struct net2280, gadget); - - spin_lock_irqsave (&dev->lock, flags); - - for (i = 1; i <= 4; i++) - if (dev->ep [i].desc) { - status = -EINVAL; - break; - } - if (mode < 0 || mode > 2) - status = -EINVAL; - if (status == 0) - set_fifo_mode (dev, mode); - spin_unlock_irqrestore (&dev->lock, flags); - - if (status == 0) { - if (mode == 1) - DEBUG (dev, "fifo: ep-a 2K, ep-b 2K\n"); - else if (mode == 2) - DEBUG (dev, "fifo: ep-a 2K, ep-b 1K, ep-c 1K\n"); - /* else all are 1K */ - } - return status; -} -EXPORT_SYMBOL (net2280_set_fifo_mode); - -/*-------------------------------------------------------------------------*/ - /* keeping it simple: * - one bus driver, initted first; * - one function driver, initted second @@ -1844,8 +1744,6 @@ EXPORT_SYMBOL (net2280_set_fifo_mode); * perhaps to bind specific drivers to specific devices. */ -static struct net2280 *the_controller; - static void usb_reset (struct net2280 *dev) { u32 tmp; @@ -1907,9 +1805,9 @@ static void usb_reinit (struct net2280 *dev) ep->regs = &dev->epregs [tmp]; ep_reset (dev->regs, ep); } - dev->ep [0].ep.maxpacket = 64; - dev->ep [5].ep.maxpacket = 64; - dev->ep [6].ep.maxpacket = 64; + usb_ep_set_maxpacket_limit(&dev->ep [0].ep, 64); + usb_ep_set_maxpacket_limit(&dev->ep [5].ep, 64); + usb_ep_set_maxpacket_limit(&dev->ep [6].ep, 64); dev->gadget.ep0 = &dev->ep [0].ep; dev->ep [0].stopped = 0; @@ -1971,9 +1869,10 @@ static void ep0_start (struct net2280 *dev) * disconnect is reported. then a host may connect again, or * the driver might get unbound. */ -int usb_gadget_register_driver (struct usb_gadget_driver *driver) +static int net2280_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver) { - struct net2280 *dev = the_controller; + struct net2280 *dev; int retval; unsigned i; @@ -1981,16 +1880,11 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver) * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE) * "must not be used in normal operation" */ - if (!driver - || driver->speed != USB_SPEED_HIGH - || !driver->bind - || !driver->unbind + if (!driver || driver->max_speed < USB_SPEED_HIGH || !driver->setup) return -EINVAL; - if (!dev) - return -ENODEV; - if (dev->driver) - return -EBUSY; + + dev = container_of (_gadget, struct net2280, gadget); for (i = 0; i < 7; i++) dev->ep [i].irqs = 0; @@ -1999,18 +1893,15 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver) dev->softconnect = 1; driver->driver.bus = NULL; dev->driver = driver; - dev->gadget.dev.driver = &driver->driver; - retval = driver->bind (&dev->gadget); - if (retval) { - DEBUG (dev, "bind to driver %s --> %d\n", - driver->driver.name, retval); - dev->driver = NULL; - dev->gadget.dev.driver = NULL; - return retval; - } - device_create_file (&dev->pdev->dev, &dev_attr_function); - device_create_file (&dev->pdev->dev, &dev_attr_queues); + retval = device_create_file (&dev->pdev->dev, &dev_attr_function); + if (retval) goto err_unbind; + retval = device_create_file (&dev->pdev->dev, &dev_attr_queues); + if (retval) goto err_func; + + /* Enable force-full-speed testing mode, if desired */ + if (full_speed) + writel(1 << FORCE_FULL_SPEED_MODE, &dev->usb->xcvrdiag); /* ... then enable host detection and ep0; and we're ready * for set_configuration as well as eventual disconnect. @@ -2025,8 +1916,13 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver) /* pci writes may still be posted */ return 0; + +err_func: + device_remove_file (&dev->pdev->dev, &dev_attr_function); +err_unbind: + dev->driver = NULL; + return retval; } -EXPORT_SYMBOL (usb_gadget_register_driver); static void stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver) @@ -2046,43 +1942,41 @@ stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver) /* report disconnect; the driver is already quiesced */ if (driver) { - spin_unlock (&dev->lock); - driver->disconnect (&dev->gadget); - spin_lock (&dev->lock); + spin_unlock(&dev->lock); + driver->disconnect(&dev->gadget); + spin_lock(&dev->lock); } usb_reinit (dev); } -int usb_gadget_unregister_driver (struct usb_gadget_driver *driver) +static int net2280_stop(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver) { - struct net2280 *dev = the_controller; + struct net2280 *dev; unsigned long flags; - if (!dev) - return -ENODEV; - if (!driver || driver != dev->driver) - return -EINVAL; + dev = container_of (_gadget, struct net2280, gadget); spin_lock_irqsave (&dev->lock, flags); stop_activity (dev, driver); spin_unlock_irqrestore (&dev->lock, flags); - net2280_pullup (&dev->gadget, 0); - - driver->unbind (&dev->gadget); - dev->gadget.dev.driver = NULL; dev->driver = NULL; net2280_led_active (dev, 0); + + /* Disable full-speed test mode */ + writel(0, &dev->usb->xcvrdiag); + device_remove_file (&dev->pdev->dev, &dev_attr_function); device_remove_file (&dev->pdev->dev, &dev_attr_queues); - DEBUG (dev, "unregistered driver '%s'\n", driver->driver.name); + DEBUG(dev, "unregistered driver '%s'\n", + driver ? driver->driver.name : ""); + return 0; } -EXPORT_SYMBOL (usb_gadget_unregister_driver); - /*-------------------------------------------------------------------------*/ @@ -2110,7 +2004,11 @@ static void handle_ep_small (struct net2280_ep *ep) VDEBUG (ep->dev, "%s ack ep_stat %08x, req %p\n", ep->ep.name, t, req ? &req->req : 0); #endif - writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat); + if (!ep->is_in || ep->dev->pdev->device == 0x2280) + writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat); + else + /* Added for 2282 */ + writel (t, &ep->regs->ep_stat); /* for ep0, monitor token irqs to catch data stage length errors * and to synchronize on status. @@ -2139,7 +2037,8 @@ static void handle_ep_small (struct net2280_ep *ep) ep->stopped = 1; set_halt (ep); mode = 2; - } else if (!req && ep->stopped) + } else if (ep->responded && + !req && !ep->stopped) write_fifo (ep, NULL); } } else { @@ -2154,7 +2053,7 @@ static void handle_ep_small (struct net2280_ep *ep) } else if (((t & (1 << DATA_OUT_PING_TOKEN_INTERRUPT)) && req && req->req.actual == req->req.length) - || !req) { + || (ep->responded && !req)) { ep->dev->protocol_stall = 1; set_halt (ep); ep->stopped = 1; @@ -2169,7 +2068,7 @@ static void handle_ep_small (struct net2280_ep *ep) return; /* manual DMA queue advance after short OUT */ - if (likely (ep->dma != 0)) { + if (likely (ep->dma)) { if (t & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) { u32 count; int stopped = ep->stopped; @@ -2214,7 +2113,9 @@ static void handle_ep_small (struct net2280_ep *ep) if (likely (req)) { req->td->dmacount = 0; t = readl (&ep->regs->ep_avail); - dma_done (ep, req, count, t); + dma_done (ep, req, count, + (ep->out_overflow || t) + ? -EOVERFLOW : 0); } /* also flush to prevent erratum 0106 trouble */ @@ -2252,9 +2153,7 @@ static void handle_ep_small (struct net2280_ep *ep) /* if we wrote it all, we're usually done */ if (req->req.actual == req->req.length) { if (ep->num == 0) { - /* wait for control status */ - if (mode != 2) - req = NULL; + /* send zlps until the status stage */ } else if (!req->req.zero || len != ep->ep.maxpacket) mode = 2; } @@ -2337,7 +2236,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) u32 raw [2]; struct usb_ctrlrequest r; } u; - int tmp = 0; + int tmp; struct net2280_request *req; if (dev->gadget.speed == USB_SPEED_UNKNOWN) { @@ -2346,9 +2245,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) else dev->gadget.speed = USB_SPEED_FULL; net2280_led_speed (dev, dev->gadget.speed); - DEBUG (dev, "%s speed\n", - (dev->gadget.speed == USB_SPEED_HIGH) - ? "high" : "full"); + DEBUG(dev, "%s\n", usb_speed_string(dev->gadget.speed)); } ep = &dev->ep [0]; @@ -2364,14 +2261,19 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) } ep->stopped = 0; dev->protocol_stall = 0; - writel ( (1 << TIMEOUT) + + if (ep->dev->pdev->device == 0x2280) + tmp = (1 << FIFO_OVERFLOW) + | (1 << FIFO_UNDERFLOW); + else + tmp = 0; + + writel (tmp | (1 << TIMEOUT) | (1 << USB_STALL_SENT) | (1 << USB_IN_NAK_SENT) | (1 << USB_IN_ACK_RCVD) | (1 << USB_OUT_PING_NAK_SENT) | (1 << USB_OUT_ACK_SENT) - | (1 << FIFO_OVERFLOW) - | (1 << FIFO_UNDERFLOW) | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT) | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) | (1 << DATA_PACKET_RECEIVED_INTERRUPT) @@ -2381,13 +2283,15 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) , &ep->regs->ep_stat); u.raw [0] = readl (&dev->usb->setup0123); u.raw [1] = readl (&dev->usb->setup4567); - + cpu_to_le32s (&u.raw [0]); cpu_to_le32s (&u.raw [1]); -#define w_value le16_to_cpup (&u.r.wValue) -#define w_index le16_to_cpup (&u.r.wIndex) -#define w_length le16_to_cpup (&u.r.wLength) + tmp = 0; + +#define w_value le16_to_cpu(u.r.wValue) +#define w_index le16_to_cpu(u.r.wIndex) +#define w_length le16_to_cpu(u.r.wLength) /* ack the irq */ writel (1 << SETUP_PACKET_INTERRUPT, &dev->regs->irqstat0); @@ -2413,6 +2317,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) /* we made the hardware handle most lowlevel requests; * everything else goes uplevel to the gadget code. */ + ep->responded = 1; switch (u.r.bRequest) { case USB_REQ_GET_STATUS: { struct net2280_ep *e; @@ -2421,15 +2326,15 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) /* hw handles device and interface status */ if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT)) goto delegate; - if ((e = get_ep_by_addr (dev, w_index)) == 0 + if ((e = get_ep_by_addr (dev, w_index)) == NULL || w_length > 2) goto do_stall; if (readl (&e->regs->ep_rsp) & (1 << SET_ENDPOINT_HALT)) - status = __constant_cpu_to_le32 (1); + status = cpu_to_le32 (1); else - status = __constant_cpu_to_le32 (0); + status = cpu_to_le32 (0); /* don't bother with a request object! */ writel (0, &dev->epregs [0].ep_irqenb); @@ -2449,11 +2354,16 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) if (w_value != USB_ENDPOINT_HALT || w_length != 0) goto do_stall; - if ((e = get_ep_by_addr (dev, w_index)) == 0) + if ((e = get_ep_by_addr (dev, w_index)) == NULL) goto do_stall; - clear_halt (e); + if (e->wedged) { + VDEBUG(dev, "%s wedged, halt not cleared\n", + ep->ep.name); + } else { + VDEBUG(dev, "%s clear halt\n", ep->ep.name); + clear_halt(e); + } allow_status (ep); - VDEBUG (dev, "%s clear halt\n", ep->ep.name); goto next_endpoints; } break; @@ -2466,7 +2376,9 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) if (w_value != USB_ENDPOINT_HALT || w_length != 0) goto do_stall; - if ((e = get_ep_by_addr (dev, w_index)) == 0) + if ((e = get_ep_by_addr (dev, w_index)) == NULL) + goto do_stall; + if (e->ep.name == ep0name) goto do_stall; set_halt (e); allow_status (ep); @@ -2476,11 +2388,12 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) break; default: delegate: - VDEBUG (dev, "setup %02x.%02x v%04x i%04x l%04x" + VDEBUG (dev, "setup %02x.%02x v%04x i%04x l%04x " "ep_cfg %08x\n", u.r.bRequestType, u.r.bRequest, w_value, w_index, w_length, readl (&ep->regs->ep_cfg)); + ep->responded = 0; spin_unlock (&dev->lock); tmp = dev->driver->setup (&dev->gadget, &u.r); spin_lock (&dev->lock); @@ -2545,15 +2458,17 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat) mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED); /* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set. - * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and - * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT + * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and + * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT * only indicates a change in the reset state). */ if (stat & tmp) { writel (tmp, &dev->regs->irqstat1); - if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) && - ((readl (&dev->usb->usbstat) & mask) == 0)) - || ((readl (&dev->usb->usbctl) & (1 << VBUS_PIN)) == 0) + if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) + && ((readl (&dev->usb->usbstat) & mask) + == 0)) + || ((readl (&dev->usb->usbctl) + & (1 << VBUS_PIN)) == 0) ) && ( dev->gadget.speed != USB_SPEED_UNKNOWN)) { DEBUG (dev, "disconnect %s\n", dev->driver->driver.name); @@ -2594,10 +2509,17 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat) writel (stat, &dev->regs->irqstat1); /* some status we can just ignore */ - stat &= ~((1 << CONTROL_STATUS_INTERRUPT) - | (1 << SUSPEND_REQUEST_INTERRUPT) - | (1 << RESUME_INTERRUPT) - | (1 << SOF_INTERRUPT)); + if (dev->pdev->device == 0x2280) + stat &= ~((1 << CONTROL_STATUS_INTERRUPT) + | (1 << SUSPEND_REQUEST_INTERRUPT) + | (1 << RESUME_INTERRUPT) + | (1 << SOF_INTERRUPT)); + else + stat &= ~((1 << CONTROL_STATUS_INTERRUPT) + | (1 << RESUME_INTERRUPT) + | (1 << SOF_DOWN_INTERRUPT) + | (1 << SOF_INTERRUPT)); + if (!stat) return; // DEBUG (dev, "irqstat1 %08x\n", stat); @@ -2670,7 +2592,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat) req = list_entry (ep->queue.next, struct net2280_request, queue); dmacount = req->td->dmacount; - dmacount &= __constant_cpu_to_le32 ( + dmacount &= cpu_to_le32 ( (1 << VALID_BIT) | DMA_BYTE_COUNT_MASK); if (dmacount && (dmacount & valid_bit) == 0) @@ -2698,10 +2620,14 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat) DEBUG (dev, "unhandled irqstat1 %08x\n", stat); } -static irqreturn_t net2280_irq (int irq, void *_dev, struct pt_regs * r) +static irqreturn_t net2280_irq (int irq, void *_dev) { struct net2280 *dev = _dev; + /* shared interrupt, not ours */ + if (!(readl(&dev->regs->irqstat0) & (1 << INTA_ASSERTED))) + return IRQ_NONE; + spin_lock (&dev->lock); /* handle disconnect, dma, and more */ @@ -2730,13 +2656,9 @@ static void net2280_remove (struct pci_dev *pdev) { struct net2280 *dev = pci_get_drvdata (pdev); - /* start with the driver above us */ - if (dev->driver) { - /* should have been done already by driver model core */ - WARN (dev, "pci remove, driver '%s' is still registered\n", - dev->driver->driver.name); - usb_gadget_unregister_driver (dev->driver); - } + usb_del_gadget_udc(&dev->gadget); + + BUG_ON(dev->driver); /* then clean up the resources we allocated during probe() */ net2280_led_shutdown (dev); @@ -2759,13 +2681,9 @@ static void net2280_remove (struct pci_dev *pdev) pci_resource_len (pdev, 0)); if (dev->enabled) pci_disable_device (pdev); - device_unregister (&dev->gadget.dev); device_remove_file (&pdev->dev, &dev_attr_registers); - pci_set_drvdata (pdev, NULL); INFO (dev, "unbind\n"); - - the_controller = NULL; } /* wrap this driver around the specified device, but @@ -2778,39 +2696,26 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) unsigned long resource, len; void __iomem *base = NULL; int retval, i; - char buf [8], *bufp; - - /* if you want to support more than one controller in a system, - * usb_gadget_driver_{register,unregister}() must change. - */ - if (the_controller) { - dev_warn (&pdev->dev, "ignoring\n"); - return -EBUSY; - } /* alloc, and start init */ - dev = kmalloc (sizeof *dev, SLAB_KERNEL); + dev = kzalloc (sizeof *dev, GFP_KERNEL); if (dev == NULL){ retval = -ENOMEM; goto done; } - memset (dev, 0, sizeof *dev); + pci_set_drvdata (pdev, dev); spin_lock_init (&dev->lock); dev->pdev = pdev; dev->gadget.ops = &net2280_ops; - dev->gadget.is_dualspeed = 1; + dev->gadget.max_speed = USB_SPEED_HIGH; /* the "gadget" abstracts/virtualizes the controller */ - strcpy (dev->gadget.dev.bus_id, "gadget"); - dev->gadget.dev.parent = &pdev->dev; - dev->gadget.dev.dma_mask = pdev->dev.dma_mask; - dev->gadget.dev.release = gadget_release; dev->gadget.name = driver_name; /* now all the pci goodies ... */ if (pci_enable_device (pdev) < 0) { - retval = -ENODEV; + retval = -ENODEV; goto done; } dev->enabled = 1; @@ -2828,6 +2733,10 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) } dev->region = 1; + /* FIXME provide firmware download interface to put + * 8051 code into the chip, e.g. to turn on PCI PM. + */ + base = ioremap_nocache (resource, len); if (base == NULL) { DEBUG (dev, "can't map memory\n"); @@ -2852,15 +2761,10 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) retval = -ENODEV; goto done; } -#ifndef __sparc__ - scnprintf (buf, sizeof buf, "%d", pdev->irq); - bufp = buf; -#else - bufp = __irq_itoa(pdev->irq); -#endif - if (request_irq (pdev->irq, net2280_irq, SA_SHIRQ, driver_name, dev) + + if (request_irq (pdev->irq, net2280_irq, IRQF_SHARED, driver_name, dev) != 0) { - ERROR (dev, "request interrupt %s failed\n", bufp); + ERROR (dev, "request interrupt %d failed\n", pdev->irq); retval = -EBUSY; goto done; } @@ -2888,7 +2792,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) goto done; } td->dmacount = 0; /* not VALID */ - td->dmaaddr = __constant_cpu_to_le32 (DMA_ADDR_INVALID); td->dmadesc = td->dmaaddr; dev->ep [i].dummy = td; } @@ -2902,25 +2805,26 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) , &dev->pci->pcimstctl); /* erratum 0115 shouldn't appear: Linux inits PCI_LATENCY_TIMER */ pci_set_master (pdev); - pci_set_mwi (pdev); + pci_try_set_mwi (pdev); /* ... also flushes any posted pci writes */ dev->chiprev = get_idx_reg (dev->regs, REG_CHIPREV) & 0xffff; /* done */ - pci_set_drvdata (pdev, dev); INFO (dev, "%s\n", driver_desc); - INFO (dev, "irq %s, pci mem %p, chip rev %04x\n", - bufp, base, dev->chiprev); + INFO (dev, "irq %d, pci mem %p, chip rev %04x\n", + pdev->irq, base, dev->chiprev); INFO (dev, "version: " DRIVER_VERSION "; dma %s\n", use_dma ? (use_dma_chaining ? "chaining" : "enabled") : "disabled"); - the_controller = dev; - - device_register (&dev->gadget.dev); - device_create_file (&pdev->dev, &dev_attr_registers); + retval = device_create_file (&pdev->dev, &dev_attr_registers); + if (retval) goto done; + retval = usb_add_gadget_udc_release(&pdev->dev, &dev->gadget, + gadget_release); + if (retval) + goto done; return 0; done: @@ -2929,16 +2833,42 @@ done: return retval; } +/* make sure the board is quiescent; otherwise it will continue + * generating IRQs across the upcoming reboot. + */ + +static void net2280_shutdown (struct pci_dev *pdev) +{ + struct net2280 *dev = pci_get_drvdata (pdev); + + /* disable IRQs */ + writel (0, &dev->regs->pciirqenb0); + writel (0, &dev->regs->pciirqenb1); + + /* disable the pullup so the host will think we're gone */ + writel (0, &dev->usb->usbctl); + + /* Disable full-speed test mode */ + writel(0, &dev->usb->xcvrdiag); +} + /*-------------------------------------------------------------------------*/ -static struct pci_device_id pci_ids [] = { { - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), - .class_mask = ~0, +static const struct pci_device_id pci_ids [] = { { + .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), + .class_mask = ~0, .vendor = 0x17cc, .device = 0x2280, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, +}, { + .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), + .class_mask = ~0, + .vendor = 0x17cc, + .device = 0x2282, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, }, { /* end: all zeroes */ } }; @@ -2951,6 +2881,7 @@ static struct pci_driver net2280_pci_driver = { .probe = net2280_probe, .remove = net2280_remove, + .shutdown = net2280_shutdown, /* FIXME add power management support */ }; |