diff options
Diffstat (limited to 'drivers/usb/gadget/net2272.c')
| -rw-r--r-- | drivers/usb/gadget/net2272.c | 2710 |
1 files changed, 2710 insertions, 0 deletions
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c new file mode 100644 index 00000000000..ca15405583e --- /dev/null +++ b/drivers/usb/gadget/net2272.c @@ -0,0 +1,2710 @@ +/* + * Driver for PLX NET2272 USB device controller + * + * Copyright (C) 2005-2006 PLX Technology, Inc. + * Copyright (C) 2006-2011 Analog Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/prefetch.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <linux/usb.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include <asm/byteorder.h> +#include <asm/unaligned.h> + +#include "net2272.h" + +#define DRIVER_DESC "PLX NET2272 USB Peripheral Controller" + +static const char driver_name[] = "net2272"; +static const char driver_vers[] = "2006 October 17/mainline"; +static const char driver_desc[] = DRIVER_DESC; + +static const char ep0name[] = "ep0"; +static const char * const ep_name[] = { + ep0name, + "ep-a", "ep-b", "ep-c", +}; + +#ifdef CONFIG_USB_NET2272_DMA +/* + * use_dma: the NET2272 can use an external DMA controller. + * Note that since there is no generic DMA api, some functions, + * notably request_dma, start_dma, and cancel_dma will need to be + * modified for your platform's particular dma controller. + * + * If use_dma is disabled, pio will be used instead. + */ +static bool use_dma = 0; +module_param(use_dma, bool, 0644); + +/* + * dma_ep: selects the endpoint for use with dma (1=ep-a, 2=ep-b) + * The NET2272 can only use dma for a single endpoint at a time. + * At some point this could be modified to allow either endpoint + * to take control of dma as it becomes available. + * + * Note that DMA should not be used on OUT endpoints unless it can + * be guaranteed that no short packets will arrive on an IN endpoint + * while the DMA operation is pending. Otherwise the OUT DMA will + * terminate prematurely (See NET2272 Errata 630-0213-0101) + */ +static ushort dma_ep = 1; +module_param(dma_ep, ushort, 0644); + +/* + * dma_mode: net2272 dma mode setting (see LOCCTL1 definiton): + * mode 0 == Slow DREQ mode + * mode 1 == Fast DREQ mode + * mode 2 == Burst mode + */ +static ushort dma_mode = 2; +module_param(dma_mode, ushort, 0644); +#else +#define use_dma 0 +#define dma_ep 1 +#define dma_mode 2 +#endif + +/* + * fifo_mode: net2272 buffer configuration: + * mode 0 == ep-{a,b,c} 512db each + * mode 1 == ep-a 1k, ep-{b,c} 512db + * mode 2 == ep-a 1k, ep-b 1k, ep-c 512db + * mode 3 == ep-a 1k, ep-b disabled, ep-c 512db + */ +static ushort fifo_mode = 0; +module_param(fifo_mode, ushort, 0644); + +/* + * enable_suspend: When enabled, the driver will respond to + * USB suspend requests by powering down the NET2272. Otherwise, + * USB suspend requests will be ignored. This is acceptible for + * self-powered devices. For bus powered devices set this to 1. + */ +static ushort enable_suspend = 0; +module_param(enable_suspend, ushort, 0644); + +static void assert_out_naking(struct net2272_ep *ep, const char *where) +{ + u8 tmp; + +#ifndef DEBUG + return; +#endif + + tmp = net2272_ep_read(ep, EP_STAT0); + if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) { + dev_dbg(ep->dev->dev, "%s %s %02x !NAK\n", + ep->ep.name, where, tmp); + net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS); + } +} +#define ASSERT_OUT_NAKING(ep) assert_out_naking(ep, __func__) + +static void stop_out_naking(struct net2272_ep *ep) +{ + u8 tmp = net2272_ep_read(ep, EP_STAT0); + + if ((tmp & (1 << NAK_OUT_PACKETS)) != 0) + net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS); +} + +#define PIPEDIR(bAddress) (usb_pipein(bAddress) ? "in" : "out") + +static char *type_string(u8 bmAttributes) +{ + switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_BULK: return "bulk"; + case USB_ENDPOINT_XFER_ISOC: return "iso"; + case USB_ENDPOINT_XFER_INT: return "intr"; + default: return "control"; + } +} + +static char *buf_state_string(unsigned state) +{ + switch (state) { + case BUFF_FREE: return "free"; + case BUFF_VALID: return "valid"; + case BUFF_LCL: return "local"; + case BUFF_USB: return "usb"; + default: return "unknown"; + } +} + +static char *dma_mode_string(void) +{ + if (!use_dma) + return "PIO"; + switch (dma_mode) { + case 0: return "SLOW DREQ"; + case 1: return "FAST DREQ"; + case 2: return "BURST"; + default: return "invalid"; + } +} + +static void net2272_dequeue_all(struct net2272_ep *); +static int net2272_kick_dma(struct net2272_ep *, struct net2272_request *); +static int net2272_fifo_status(struct usb_ep *); + +static struct usb_ep_ops net2272_ep_ops; + +/*---------------------------------------------------------------------------*/ + +static int +net2272_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +{ + struct net2272 *dev; + struct net2272_ep *ep; + u32 max; + u8 tmp; + unsigned long flags; + + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || !desc || ep->desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + max = usb_endpoint_maxp(desc) & 0x1fff; + + spin_lock_irqsave(&dev->lock, flags); + _ep->maxpacket = max & 0x7fff; + ep->desc = desc; + + /* net2272_ep_reset() has already been called */ + ep->stopped = 0; + ep->wedged = 0; + + /* set speed-dependent max packet */ + net2272_ep_write(ep, EP_MAXPKT0, max & 0xff); + net2272_ep_write(ep, EP_MAXPKT1, (max & 0xff00) >> 8); + + /* set type, direction, address; reset fifo counters */ + net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH); + tmp = usb_endpoint_type(desc); + if (usb_endpoint_xfer_bulk(desc)) { + /* catch some particularly blatant driver bugs */ + if ((dev->gadget.speed == USB_SPEED_HIGH && max != 512) || + (dev->gadget.speed == USB_SPEED_FULL && max > 64)) { + spin_unlock_irqrestore(&dev->lock, flags); + return -ERANGE; + } + } + ep->is_iso = usb_endpoint_xfer_isoc(desc) ? 1 : 0; + tmp <<= ENDPOINT_TYPE; + tmp |= ((desc->bEndpointAddress & 0x0f) << ENDPOINT_NUMBER); + tmp |= usb_endpoint_dir_in(desc) << ENDPOINT_DIRECTION; + tmp |= (1 << ENDPOINT_ENABLE); + + /* for OUT transfers, block the rx fifo until a read is posted */ + ep->is_in = usb_endpoint_dir_in(desc); + if (!ep->is_in) + net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS); + + net2272_ep_write(ep, EP_CFG, tmp); + + /* enable irqs */ + tmp = (1 << ep->num) | net2272_read(dev, IRQENB0); + net2272_write(dev, IRQENB0, tmp); + + tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE) + | net2272_ep_read(ep, EP_IRQENB); + net2272_ep_write(ep, EP_IRQENB, tmp); + + tmp = desc->bEndpointAddress; + dev_dbg(dev->dev, "enabled %s (ep%d%s-%s) max %04x cfg %02x\n", + _ep->name, tmp & 0x0f, PIPEDIR(tmp), + type_string(desc->bmAttributes), max, + net2272_ep_read(ep, EP_CFG)); + + spin_unlock_irqrestore(&dev->lock, flags); + return 0; +} + +static void net2272_ep_reset(struct net2272_ep *ep) +{ + u8 tmp; + + ep->desc = NULL; + INIT_LIST_HEAD(&ep->queue); + + usb_ep_set_maxpacket_limit(&ep->ep, ~0); + ep->ep.ops = &net2272_ep_ops; + + /* disable irqs, endpoint */ + net2272_ep_write(ep, EP_IRQENB, 0); + + /* init to our chosen defaults, notably so that we NAK OUT + * packets until the driver queues a read. + */ + tmp = (1 << NAK_OUT_PACKETS_MODE) | (1 << ALT_NAK_OUT_PACKETS); + net2272_ep_write(ep, EP_RSPSET, tmp); + + tmp = (1 << INTERRUPT_MODE) | (1 << HIDE_STATUS_PHASE); + if (ep->num != 0) + tmp |= (1 << ENDPOINT_TOGGLE) | (1 << ENDPOINT_HALT); + + net2272_ep_write(ep, EP_RSPCLR, tmp); + + /* scrub most status bits, and flush any fifo state */ + net2272_ep_write(ep, EP_STAT0, + (1 << DATA_IN_TOKEN_INTERRUPT) + | (1 << DATA_OUT_TOKEN_INTERRUPT) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) + | (1 << DATA_PACKET_RECEIVED_INTERRUPT) + | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)); + + net2272_ep_write(ep, EP_STAT1, + (1 << TIMEOUT) + | (1 << USB_OUT_ACK_SENT) + | (1 << USB_OUT_NAK_SENT) + | (1 << USB_IN_ACK_RCVD) + | (1 << USB_IN_NAK_SENT) + | (1 << USB_STALL_SENT) + | (1 << LOCAL_OUT_ZLP) + | (1 << BUFFER_FLUSH)); + + /* fifo size is handled seperately */ +} + +static int net2272_disable(struct usb_ep *_ep) +{ + struct net2272_ep *ep; + unsigned long flags; + + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || !ep->desc || _ep->name == ep0name) + return -EINVAL; + + spin_lock_irqsave(&ep->dev->lock, flags); + net2272_dequeue_all(ep); + net2272_ep_reset(ep); + + dev_vdbg(ep->dev->dev, "disabled %s\n", _ep->name); + + spin_unlock_irqrestore(&ep->dev->lock, flags); + return 0; +} + +/*---------------------------------------------------------------------------*/ + +static struct usb_request * +net2272_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct net2272_ep *ep; + struct net2272_request *req; + + if (!_ep) + return NULL; + ep = container_of(_ep, struct net2272_ep, ep); + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void +net2272_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct net2272_ep *ep; + struct net2272_request *req; + + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || !_req) + return; + + req = container_of(_req, struct net2272_request, req); + WARN_ON(!list_empty(&req->queue)); + kfree(req); +} + +static void +net2272_done(struct net2272_ep *ep, struct net2272_request *req, int status) +{ + struct net2272 *dev; + unsigned stopped = ep->stopped; + + if (ep->num == 0) { + if (ep->dev->protocol_stall) { + ep->stopped = 1; + set_halt(ep); + } + allow_status(ep); + } + + list_del_init(&req->queue); + + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + dev = ep->dev; + if (use_dma && ep->dma) + usb_gadget_unmap_request(&dev->gadget, &req->req, + ep->is_in); + + if (status && status != -ESHUTDOWN) + dev_vdbg(dev->dev, "complete %s req %p stat %d len %u/%u buf %p\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length, req->req.buf); + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + spin_unlock(&dev->lock); + req->req.complete(&ep->ep, &req->req); + spin_lock(&dev->lock); + ep->stopped = stopped; +} + +static int +net2272_write_packet(struct net2272_ep *ep, u8 *buf, + struct net2272_request *req, unsigned max) +{ + u16 __iomem *ep_data = net2272_reg_addr(ep->dev, EP_DATA); + u16 *bufp; + unsigned length, count; + u8 tmp; + + length = min(req->req.length - req->req.actual, max); + req->req.actual += length; + + dev_vdbg(ep->dev->dev, "write packet %s req %p max %u len %u avail %u\n", + ep->ep.name, req, max, length, + (net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0)); + + count = length; + bufp = (u16 *)buf; + + while (likely(count >= 2)) { + /* no byte-swap required; chip endian set during init */ + writew(*bufp++, ep_data); + count -= 2; + } + buf = (u8 *)bufp; + + /* write final byte by placing the NET2272 into 8-bit mode */ + if (unlikely(count)) { + tmp = net2272_read(ep->dev, LOCCTL); + net2272_write(ep->dev, LOCCTL, tmp & ~(1 << DATA_WIDTH)); + writeb(*buf, ep_data); + net2272_write(ep->dev, LOCCTL, tmp); + } + return length; +} + +/* returns: 0: still running, 1: completed, negative: errno */ +static int +net2272_write_fifo(struct net2272_ep *ep, struct net2272_request *req) +{ + u8 *buf; + unsigned count, max; + int status; + + dev_vdbg(ep->dev->dev, "write_fifo %s actual %d len %d\n", + ep->ep.name, req->req.actual, req->req.length); + + /* + * Keep loading the endpoint until the final packet is loaded, + * or the endpoint buffer is full. + */ + top: + /* + * Clear interrupt status + * - Packet Transmitted interrupt will become set again when the + * host successfully takes another packet + */ + net2272_ep_write(ep, EP_STAT0, (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)); + while (!(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_FULL))) { + buf = req->req.buf + req->req.actual; + prefetch(buf); + + /* force pagesel */ + net2272_ep_read(ep, EP_STAT0); + + max = (net2272_ep_read(ep, EP_AVAIL1) << 8) | + (net2272_ep_read(ep, EP_AVAIL0)); + + if (max < ep->ep.maxpacket) + max = (net2272_ep_read(ep, EP_AVAIL1) << 8) + | (net2272_ep_read(ep, EP_AVAIL0)); + + count = net2272_write_packet(ep, buf, req, max); + /* see if we are done */ + if (req->req.length == req->req.actual) { + /* validate short or zlp packet */ + if (count < ep->ep.maxpacket) + set_fifo_bytecount(ep, 0); + net2272_done(ep, req, 0); + + if (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct net2272_request, + queue); + status = net2272_kick_dma(ep, req); + + if (status < 0) + if ((net2272_ep_read(ep, EP_STAT0) + & (1 << BUFFER_EMPTY))) + goto top; + } + return 1; + } + net2272_ep_write(ep, EP_STAT0, (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)); + } + return 0; +} + +static void +net2272_out_flush(struct net2272_ep *ep) +{ + ASSERT_OUT_NAKING(ep); + + net2272_ep_write(ep, EP_STAT0, (1 << DATA_OUT_TOKEN_INTERRUPT) + | (1 << DATA_PACKET_RECEIVED_INTERRUPT)); + net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH); +} + +static int +net2272_read_packet(struct net2272_ep *ep, u8 *buf, + struct net2272_request *req, unsigned avail) +{ + u16 __iomem *ep_data = net2272_reg_addr(ep->dev, EP_DATA); + unsigned is_short; + u16 *bufp; + + req->req.actual += avail; + + dev_vdbg(ep->dev->dev, "read packet %s req %p len %u avail %u\n", + ep->ep.name, req, avail, + (net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0)); + + is_short = (avail < ep->ep.maxpacket); + + if (unlikely(avail == 0)) { + /* remove any zlp from the buffer */ + (void)readw(ep_data); + return is_short; + } + + /* Ensure we get the final byte */ + if (unlikely(avail % 2)) + avail++; + bufp = (u16 *)buf; + + do { + *bufp++ = readw(ep_data); + avail -= 2; + } while (avail); + + /* + * To avoid false endpoint available race condition must read + * ep stat0 twice in the case of a short transfer + */ + if (net2272_ep_read(ep, EP_STAT0) & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) + net2272_ep_read(ep, EP_STAT0); + + return is_short; +} + +static int +net2272_read_fifo(struct net2272_ep *ep, struct net2272_request *req) +{ + u8 *buf; + unsigned is_short; + int count; + int tmp; + int cleanup = 0; + int status = -1; + + dev_vdbg(ep->dev->dev, "read_fifo %s actual %d len %d\n", + ep->ep.name, req->req.actual, req->req.length); + + top: + do { + buf = req->req.buf + req->req.actual; + prefetchw(buf); + + count = (net2272_ep_read(ep, EP_AVAIL1) << 8) + | net2272_ep_read(ep, EP_AVAIL0); + + net2272_ep_write(ep, EP_STAT0, + (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) | + (1 << DATA_PACKET_RECEIVED_INTERRUPT)); + + tmp = req->req.length - req->req.actual; + + if (count > tmp) { + if ((tmp % ep->ep.maxpacket) != 0) { + dev_err(ep->dev->dev, + "%s out fifo %d bytes, expected %d\n", + ep->ep.name, count, tmp); + cleanup = 1; + } + count = (tmp > 0) ? tmp : 0; + } + + is_short = net2272_read_packet(ep, buf, req, count); + + /* completion */ + if (unlikely(cleanup || is_short || + ((req->req.actual == req->req.length) + && !req->req.zero))) { + + if (cleanup) { + net2272_out_flush(ep); + net2272_done(ep, req, -EOVERFLOW); + } else + net2272_done(ep, req, 0); + + /* re-initialize endpoint transfer registers + * otherwise they may result in erroneous pre-validation + * for subsequent control reads + */ + if (unlikely(ep->num == 0)) { + net2272_ep_write(ep, EP_TRANSFER2, 0); + net2272_ep_write(ep, EP_TRANSFER1, 0); + net2272_ep_write(ep, EP_TRANSFER0, 0); + } + + if (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct net2272_request, queue); + status = net2272_kick_dma(ep, req); + if ((status < 0) && + !(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_EMPTY))) + goto top; + } + return 1; + } + } while (!(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_EMPTY))); + + return 0; +} + +static void +net2272_pio_advance(struct net2272_ep *ep) +{ + struct net2272_request *req; + + if (unlikely(list_empty(&ep->queue))) + return; + + req = list_entry(ep->queue.next, struct net2272_request, queue); + (ep->is_in ? net2272_write_fifo : net2272_read_fifo)(ep, req); +} + +/* returns 0 on success, else negative errno */ +static int +net2272_request_dma(struct net2272 *dev, unsigned ep, u32 buf, + unsigned len, unsigned dir) +{ + dev_vdbg(dev->dev, "request_dma ep %d buf %08x len %d dir %d\n", + ep, buf, len, dir); + + /* The NET2272 only supports a single dma channel */ + if (dev->dma_busy) + return -EBUSY; + /* + * EP_TRANSFER (used to determine the number of bytes received + * in an OUT transfer) is 24 bits wide; don't ask for more than that. + */ + if ((dir == 1) && (len > 0x1000000)) + return -EINVAL; + + dev->dma_busy = 1; + + /* initialize platform's dma */ +#ifdef CONFIG_PCI + /* NET2272 addr, buffer addr, length, etc. */ + switch (dev->dev_id) { + case PCI_DEVICE_ID_RDK1: + /* Setup PLX 9054 DMA mode */ + writel((1 << LOCAL_BUS_WIDTH) | + (1 << TA_READY_INPUT_ENABLE) | + (0 << LOCAL_BURST_ENABLE) | + (1 << DONE_INTERRUPT_ENABLE) | + (1 << LOCAL_ADDRESSING_MODE) | + (1 << DEMAND_MODE) | + (1 << DMA_EOT_ENABLE) | + (1 << FAST_SLOW_TERMINATE_MODE_SELECT) | + (1 << DMA_CHANNEL_INTERRUPT_SELECT), + dev->rdk1.plx9054_base_addr + DMAMODE0); + + writel(0x100000, dev->rdk1.plx9054_base_addr + DMALADR0); + writel(buf, dev->rdk1.plx9054_base_addr + DMAPADR0); + writel(len, dev->rdk1.plx9054_base_addr + DMASIZ0); + writel((dir << DIRECTION_OF_TRANSFER) | + (1 << INTERRUPT_AFTER_TERMINAL_COUNT), + dev->rdk1.plx9054_base_addr + DMADPR0); + writel((1 << LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE) | + readl(dev->rdk1.plx9054_base_addr + INTCSR), + dev->rdk1.plx9054_base_addr + INTCSR); + + break; + } +#endif + + net2272_write(dev, DMAREQ, + (0 << DMA_BUFFER_VALID) | + (1 << DMA_REQUEST_ENABLE) | + (1 << DMA_CONTROL_DACK) | + (dev->dma_eot_polarity << EOT_POLARITY) | + (dev->dma_dack_polarity << DACK_POLARITY) | + (dev->dma_dreq_polarity << DREQ_POLARITY) | + ((ep >> 1) << DMA_ENDPOINT_SELECT)); + + (void) net2272_read(dev, SCRATCH); + + return 0; +} + +static void +net2272_start_dma(struct net2272 *dev) +{ + /* start platform's dma controller */ +#ifdef CONFIG_PCI + switch (dev->dev_id) { + case PCI_DEVICE_ID_RDK1: + writeb((1 << CHANNEL_ENABLE) | (1 << CHANNEL_START), + dev->rdk1.plx9054_base_addr + DMACSR0); + break; + } +#endif +} + +/* returns 0 on success, else negative errno */ +static int +net2272_kick_dma(struct net2272_ep *ep, struct net2272_request *req) +{ + unsigned size; + u8 tmp; + + if (!use_dma || (ep->num < 1) || (ep->num > 2) || !ep->dma) + return -EINVAL; + + /* don't use dma for odd-length transfers + * otherwise, we'd need to deal with the last byte with pio + */ + if (req->req.length & 1) + return -EINVAL; + + dev_vdbg(ep->dev->dev, "kick_dma %s req %p dma %08llx\n", + ep->ep.name, req, (unsigned long long) req->req.dma); + + net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS); + + /* The NET2272 can only use DMA on one endpoint at a time */ + if (ep->dev->dma_busy) + return -EBUSY; + + /* Make sure we only DMA an even number of bytes (we'll use + * pio to complete the transfer) + */ + size = req->req.length; + size &= ~1; + + /* device-to-host transfer */ + if (ep->is_in) { + /* initialize platform's dma controller */ + if (net2272_request_dma(ep->dev, ep->num, req->req.dma, size, 0)) + /* unable to obtain DMA channel; return error and use pio mode */ + return -EBUSY; + req->req.actual += size; + + /* host-to-device transfer */ + } else { + tmp = net2272_ep_read(ep, EP_STAT0); + + /* initialize platform's dma controller */ + if (net2272_request_dma(ep->dev, ep->num, req->req.dma, size, 1)) + /* unable to obtain DMA channel; return error and use pio mode */ + return -EBUSY; + + if (!(tmp & (1 << BUFFER_EMPTY))) + ep->not_empty = 1; + else + ep->not_empty = 0; + + + /* allow the endpoint's buffer to fill */ + net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS); + + /* this transfer completed and data's already in the fifo + * return error so pio gets used. + */ + if (tmp & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) { + + /* deassert dreq */ + net2272_write(ep->dev, DMAREQ, + (0 << DMA_BUFFER_VALID) | + (0 << DMA_REQUEST_ENABLE) | + (1 << DMA_CONTROL_DACK) | + (ep->dev->dma_eot_polarity << EOT_POLARITY) | + (ep->dev->dma_dack_polarity << DACK_POLARITY) | + (ep->dev->dma_dreq_polarity << DREQ_POLARITY) | + ((ep->num >> 1) << DMA_ENDPOINT_SELECT)); + + return -EBUSY; + } + } + + /* Don't use per-packet interrupts: use dma interrupts only */ + net2272_ep_write(ep, EP_IRQENB, 0); + + net2272_start_dma(ep->dev); + + return 0; +} + +static void net2272_cancel_dma(struct net2272 *dev) +{ +#ifdef CONFIG_PCI + switch (dev->dev_id) { + case PCI_DEVICE_ID_RDK1: + writeb(0, dev->rdk1.plx9054_base_addr + DMACSR0); + writeb(1 << CHANNEL_ABORT, dev->rdk1.plx9054_base_addr + DMACSR0); + while (!(readb(dev->rdk1.plx9054_base_addr + DMACSR0) & + (1 << CHANNEL_DONE))) + continue; /* wait for dma to stabalize */ + + /* dma abort generates an interrupt */ + writeb(1 << CHANNEL_CLEAR_INTERRUPT, + dev->rdk1.plx9054_base_addr + DMACSR0); + break; + } +#endif + + dev->dma_busy = 0; +} + +/*---------------------------------------------------------------------------*/ + +static int +net2272_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct net2272_request *req; + struct net2272_ep *ep; + struct net2272 *dev; + unsigned long flags; + int status = -1; + u8 s; + + req = container_of(_req, struct net2272_request, req); + if (!_req || !_req->complete || !_req->buf + || !list_empty(&req->queue)) + return -EINVAL; + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return -EINVAL; + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + /* set up dma mapping in case the caller didn't */ + if (use_dma && ep->dma) { + status = usb_gadget_map_request(&dev->gadget, _req, + ep->is_in); + if (status) + return status; + } + + dev_vdbg(dev->dev, "%s queue req %p, len %d buf %p dma %08llx %s\n", + _ep->name, _req, _req->length, _req->buf, + (unsigned long long) _req->dma, _req->zero ? "zero" : "!zero"); + + spin_lock_irqsave(&dev->lock, flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* kickstart this i/o queue? */ + if (list_empty(&ep->queue) && !ep->stopped) { + /* maybe there's no control data, just status ack */ + if (ep->num == 0 && _req->length == 0) { + net2272_done(ep, req, 0); + dev_vdbg(dev->dev, "%s status ack\n", ep->ep.name); + goto done; + } + + /* Return zlp, don't let it block subsequent packets */ + s = net2272_ep_read(ep, EP_STAT0); + if (s & (1 << BUFFER_EMPTY)) { + /* Buffer is empty check for a blocking zlp, handle it */ + if ((s & (1 << NAK_OUT_PACKETS)) && + net2272_ep_read(ep, EP_STAT1) & (1 << LOCAL_OUT_ZLP)) { + dev_dbg(dev->dev, "WARNING: returning ZLP short packet termination!\n"); + /* + * Request is going to terminate with a short packet ... + * hope the client is ready for it! + */ + status = net2272_read_fifo(ep, req); + /* clear short packet naking */ + net2272_ep_write(ep, EP_STAT0, (1 << NAK_OUT_PACKETS)); + goto done; + } + } + + /* try dma first */ + status = net2272_kick_dma(ep, req); + + if (status < 0) { + /* dma failed (most likely in use by another endpoint) + * fallback to pio + */ + status = 0; + + if (ep->is_in) + status = net2272_write_fifo(ep, req); + else { + s = net2272_ep_read(ep, EP_STAT0); + if ((s & (1 << BUFFER_EMPTY)) == 0) + status = net2272_read_fifo(ep, req); + } + + if (unlikely(status != 0)) { + if (status > 0) + status = 0; + req = NULL; + } + } + } + if (likely(req)) + list_add_tail(&req->queue, &ep->queue); + + if (likely(!list_empty(&ep->queue))) + net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS); + done: + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +/* dequeue ALL requests */ +static void +net2272_dequeue_all(struct net2272_ep *ep) +{ + struct net2272_request *req; + + /* called with spinlock held */ + ep->stopped = 1; + + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct net2272_request, + queue); + net2272_done(ep, req, -ESHUTDOWN); + } +} + +/* dequeue JUST ONE request */ +static int +net2272_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct net2272_ep *ep; + struct net2272_request *req; + unsigned long flags; + int stopped; + + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0) || !_req) + return -EINVAL; + + spin_lock_irqsave(&ep->dev->lock, flags); + stopped = ep->stopped; + ep->stopped = 1; + + /* make sure it's still queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + spin_unlock_irqrestore(&ep->dev->lock, flags); + return -EINVAL; + } + + /* queue head may be partially complete */ + if (ep->queue.next == &req->queue) { + dev_dbg(ep->dev->dev, "unlink (%s) pio\n", _ep->name); + net2272_done(ep, req, -ECONNRESET); + } + req = NULL; + ep->stopped = stopped; + + spin_unlock_irqrestore(&ep->dev->lock, flags); + return 0; +} + +/*---------------------------------------------------------------------------*/ + +static int +net2272_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged) +{ + struct net2272_ep *ep; + unsigned long flags; + int ret = 0; + + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return -EINVAL; + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + if (ep->desc /* not ep0 */ && usb_endpoint_xfer_isoc(ep->desc)) + return -EINVAL; + + spin_lock_irqsave(&ep->dev->lock, flags); + if (!list_empty(&ep->queue)) + ret = -EAGAIN; + else if (ep->is_in && value && net2272_fifo_status(_ep) != 0) + ret = -EAGAIN; + else { + dev_vdbg(ep->dev->dev, "%s %s %s\n", _ep->name, + value ? "set" : "clear", + wedged ? "wedge" : "halt"); + /* set/clear */ + if (value) { + if (ep->num == 0) + ep->dev->protocol_stall = 1; + else + set_halt(ep); + if (wedged) + ep->wedged = 1; + } else { + clear_halt(ep); + ep->wedged = 0; + } + } + spin_unlock_irqrestore(&ep->dev->lock, flags); + + return ret; +} + +static int +net2272_set_halt(struct usb_ep *_ep, int value) +{ + return net2272_set_halt_and_wedge(_ep, value, 0); +} + +static int +net2272_set_wedge(struct usb_ep *_ep) +{ + if (!_ep || _ep->name == ep0name) + return -EINVAL; + return net2272_set_halt_and_wedge(_ep, 1, 1); +} + +static int +net2272_fifo_status(struct usb_ep *_ep) +{ + struct net2272_ep *ep; + u16 avail; + + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return -ENODEV; + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + avail = net2272_ep_read(ep, EP_AVAIL1) << 8; + avail |= net2272_ep_read(ep, EP_AVAIL0); + if (avail > ep->fifo_size) + return -EOVERFLOW; + if (ep->is_in) + avail = ep->fifo_size - avail; + return avail; +} + +static void +net2272_fifo_flush(struct usb_ep *_ep) +{ + struct net2272_ep *ep; + + ep = container_of(_ep, struct net2272_ep, ep); + if (!_ep || (!ep->desc && ep->num != 0)) + return; + if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) + return; + + net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH); +} + +static struct usb_ep_ops net2272_ep_ops = { + .enable = net2272_enable, + .disable = net2272_disable, + + .alloc_request = net2272_alloc_request, + .free_request = net2272_free_request, + + .queue = net2272_queue, + .dequeue = net2272_dequeue, + + .set_halt = net2272_set_halt, + .set_wedge = net2272_set_wedge, + .fifo_status = net2272_fifo_status, + .fifo_flush = net2272_fifo_flush, +}; + +/*---------------------------------------------------------------------------*/ + +static int +net2272_get_frame(struct usb_gadget *_gadget) +{ + struct net2272 *dev; + unsigned long flags; + u16 ret; + + if (!_gadget) + return -ENODEV; + dev = container_of(_gadget, struct net2272, gadget); + spin_lock_irqsave(&dev->lock, flags); + + ret = net2272_read(dev, FRAME1) << 8; + ret |= net2272_read(dev, FRAME0); + + spin_unlock_irqrestore(&dev->lock, flags); + return ret; +} + +static int +net2272_wakeup(struct usb_gadget *_gadget) +{ + struct net2272 *dev; + u8 tmp; + unsigned long flags; + + if (!_gadget) + return 0; + dev = container_of(_gadget, struct net2272, gadget); + + spin_lock_irqsave(&dev->lock, flags); + tmp = net2272_read(dev, USBCTL0); + if (tmp & (1 << IO_WAKEUP_ENABLE)) + net2272_write(dev, USBCTL1, (1 << GENERATE_RESUME)); + + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +static int +net2272_set_selfpowered(struct usb_gadget *_gadget, int value) +{ + struct net2272 *dev; + + if (!_gadget) + return -ENODEV; + dev = container_of(_gadget, struct net2272, gadget); + + dev->is_selfpowered = value; + + return 0; +} + +static int +net2272_pullup(struct usb_gadget *_gadget, int is_on) +{ + struct net2272 *dev; + u8 tmp; + unsigned long flags; + + if (!_gadget) + return -ENODEV; + dev = container_of(_gadget, struct net2272, gadget); + + spin_lock_irqsave(&dev->lock, flags); + tmp = net2272_read(dev, USBCTL0); + dev->softconnect = (is_on != 0); + if (is_on) + tmp |= (1 << USB_DETECT_ENABLE); + else + tmp &= ~(1 << USB_DETECT_ENABLE); + net2272_write(dev, USBCTL0, tmp); + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +static int net2272_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver); +static int net2272_stop(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver); + +static const struct usb_gadget_ops net2272_ops = { + .get_frame = net2272_get_frame, + .wakeup = net2272_wakeup, + .set_selfpowered = net2272_set_selfpowered, + .pullup = net2272_pullup, + .udc_start = net2272_start, + .udc_stop = net2272_stop, +}; + +/*---------------------------------------------------------------------------*/ + +static ssize_t +registers_show(struct device *_dev, struct device_attribute *attr, char *buf) +{ + struct net2272 *dev; + char *next; + unsigned size, t; + unsigned long flags; + u8 t1, t2; + int i; + const char *s; + + dev = dev_get_drvdata(_dev); + next = buf; + size = PAGE_SIZE; + spin_lock_irqsave(&dev->lock, flags); + + if (dev->driver) + s = dev->driver->driver.name; + else + s = "(none)"; + + /* Main Control Registers */ + t = scnprintf(next, size, "%s version %s," + "chiprev %02x, locctl %02x\n" + "irqenb0 %02x irqenb1 %02x " + "irqstat0 %02x irqstat1 %02x\n", + driver_name, driver_vers, dev->chiprev, + net2272_read(dev, LOCCTL), + net2272_read(dev, IRQENB0), + net2272_read(dev, IRQENB1), + net2272_read(dev, IRQSTAT0), + net2272_read(dev, IRQSTAT1)); + size -= t; + next += t; + + /* DMA */ + t1 = net2272_read(dev, DMAREQ); + t = scnprintf(next, size, "\ndmareq %02x: %s %s%s%s%s\n", + t1, ep_name[(t1 & 0x01) + 1], + t1 & (1 << DMA_CONTROL_DACK) ? "dack " : "", + t1 & (1 << DMA_REQUEST_ENABLE) ? "reqenb " : "", + t1 & (1 << DMA_REQUEST) ? "req " : "", + t1 & (1 << DMA_BUFFER_VALID) ? "valid " : ""); + size -= t; + next += t; + + /* USB Control Registers */ + t1 = net2272_read(dev, USBCTL1); + if (t1 & (1 << VBUS_PIN)) { + if (t1 & (1 << USB_HIGH_SPEED)) + s = "high speed"; + else if (dev->gadget.speed == USB_SPEED_UNKNOWN) + s = "powered"; + else + s = "full speed"; + } else + s = "not attached"; + t = scnprintf(next, size, + "usbctl0 %02x usbctl1 %02x addr 0x%02x (%s)\n", + net2272_read(dev, USBCTL0), t1, + net2272_read(dev, OURADDR), s); + size -= t; + next += t; + + /* Endpoint Registers */ + for (i = 0; i < 4; ++i) { + struct net2272_ep *ep; + + ep = &dev->ep[i]; + if (i && !ep->desc) + continue; + + t1 = net2272_ep_read(ep, EP_CFG); + t2 = net2272_ep_read(ep, EP_RSPSET); + t = scnprintf(next, size, + "\n%s\tcfg %02x rsp (%02x) %s%s%s%s%s%s%s%s" + "irqenb %02x\n", + ep->ep.name, t1, t2, + (t2 & (1 << ALT_NAK_OUT_PACKETS)) ? "NAK " : "", + (t2 & (1 << HIDE_STATUS_PHASE)) ? "hide " : "", + (t2 & (1 << AUTOVALIDATE)) ? "auto " : "", + (t2 & (1 << INTERRUPT_MODE)) ? "interrupt " : "", + (t2 & (1 << CONTROL_STATUS_PHASE_HANDSHAKE)) ? "status " : "", + (t2 & (1 << NAK_OUT_PACKETS_MODE)) ? "NAKmode " : "", + (t2 & (1 << ENDPOINT_TOGGLE)) ? "DATA1 " : "DATA0 ", + (t2 & (1 << ENDPOINT_HALT)) ? "HALT " : "", + net2272_ep_read(ep, EP_IRQENB)); + size -= t; + next += t; + + t = scnprintf(next, size, + "\tstat0 %02x stat1 %02x avail %04x " + "(ep%d%s-%s)%s\n", + net2272_ep_read(ep, EP_STAT0), + net2272_ep_read(ep, EP_STAT1), + (net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0), + t1 & 0x0f, + ep->is_in ? "in" : "out", + type_string(t1 >> 5), + ep->stopped ? "*" : ""); + size -= t; + next += t; + + t = scnprintf(next, size, + "\tep_transfer %06x\n", + ((net2272_ep_read(ep, EP_TRANSFER2) & 0xff) << 16) | + ((net2272_ep_read(ep, EP_TRANSFER1) & 0xff) << 8) | + ((net2272_ep_read(ep, EP_TRANSFER0) & 0xff))); + size -= t; + next += t; + + t1 = net2272_ep_read(ep, EP_BUFF_STATES) & 0x03; + t2 = (net2272_ep_read(ep, EP_BUFF_STATES) >> 2) & 0x03; + t = scnprintf(next, size, + "\tbuf-a %s buf-b %s\n", + buf_state_string(t1), + buf_state_string(t2)); + size -= t; + next += t; + } + + spin_unlock_irqrestore(&dev->lock, flags); + + return PAGE_SIZE - size; +} +static DEVICE_ATTR_RO(registers); + +/*---------------------------------------------------------------------------*/ + +static void +net2272_set_fifo_mode(struct net2272 *dev, int mode) +{ + u8 tmp; + + tmp = net2272_read(dev, LOCCTL) & 0x3f; + tmp |= (mode << 6); + net2272_write(dev, LOCCTL, tmp); + + INIT_LIST_HEAD(&dev->gadget.ep_list); + + /* always ep-a, ep-c ... maybe not ep-b */ + list_add_tail(&dev->ep[1].ep.ep_list, &dev->gadget.ep_list); + + switch (mode) { + case 0: + list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list); + dev->ep[1].fifo_size = dev->ep[2].fifo_size = 512; + break; + case 1: + list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list); + dev->ep[1].fifo_size = 1024; + dev->ep[2].fifo_size = 512; + break; + case 2: + list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list); + dev->ep[1].fifo_size = dev->ep[2].fifo_size = 1024; + break; + case 3: + dev->ep[1].fifo_size = 1024; + break; + } + + /* ep-c is always 2 512 byte buffers */ + list_add_tail(&dev->ep[3].ep.ep_list, &dev->gadget.ep_list); + dev->ep[3].fifo_size = 512; +} + +/*---------------------------------------------------------------------------*/ + +static void +net2272_usb_reset(struct net2272 *dev) +{ + dev->gadget.speed = USB_SPEED_UNKNOWN; + + net2272_cancel_dma(dev); + + net2272_write(dev, IRQENB0, 0); + net2272_write(dev, IRQENB1, 0); + + /* clear irq state */ + net2272_write(dev, IRQSTAT0, 0xff); + net2272_write(dev, IRQSTAT1, ~(1 << SUSPEND_REQUEST_INTERRUPT)); + + net2272_write(dev, DMAREQ, + (0 << DMA_BUFFER_VALID) | + (0 << DMA_REQUEST_ENABLE) | + (1 << DMA_CONTROL_DACK) | + (dev->dma_eot_polarity << EOT_POLARITY) | + (dev->dma_dack_polarity << DACK_POLARITY) | + (dev->dma_dreq_polarity << DREQ_POLARITY) | + ((dma_ep >> 1) << DMA_ENDPOINT_SELECT)); + + net2272_cancel_dma(dev); + net2272_set_fifo_mode(dev, (fifo_mode <= 3) ? fifo_mode : 0); + + /* Set the NET2272 ep fifo data width to 16-bit mode and for correct byte swapping + * note that the higher level gadget drivers are expected to convert data to little endian. + * Enable byte swap for your local bus/cpu if needed by setting BYTE_SWAP in LOCCTL here + */ + net2272_write(dev, LOCCTL, net2272_read(dev, LOCCTL) | (1 << DATA_WIDTH)); + net2272_write(dev, LOCCTL1, (dma_mode << DMA_MODE)); +} + +static void +net2272_usb_reinit(struct net2272 *dev) +{ + int i; + + /* basic endpoint init */ + for (i = 0; i < 4; ++i) { + struct net2272_ep *ep = &dev->ep[i]; + + ep->ep.name = ep_name[i]; + ep->dev = dev; + ep->num = i; + ep->not_empty = 0; + + if (use_dma && ep->num == dma_ep) + ep->dma = 1; + + if (i > 0 && i <= 3) + ep->fifo_size = 512; + else + ep->fifo_size = 64; + net2272_ep_reset(ep); + } + usb_ep_set_maxpacket_limit(&dev->ep[0].ep, 64); + + dev->gadget.ep0 = &dev->ep[0].ep; + dev->ep[0].stopped = 0; + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); +} + +static void +net2272_ep0_start(struct net2272 *dev) +{ + struct net2272_ep *ep0 = &dev->ep[0]; + + net2272_ep_write(ep0, EP_RSPSET, + (1 << NAK_OUT_PACKETS_MODE) | + (1 << ALT_NAK_OUT_PACKETS)); + net2272_ep_write(ep0, EP_RSPCLR, + (1 << HIDE_STATUS_PHASE) | + (1 << CONTROL_STATUS_PHASE_HANDSHAKE)); + net2272_write(dev, USBCTL0, + (dev->softconnect << USB_DETECT_ENABLE) | + (1 << USB_ROOT_PORT_WAKEUP_ENABLE) | + (1 << IO_WAKEUP_ENABLE)); + net2272_write(dev, IRQENB0, + (1 << SETUP_PACKET_INTERRUPT_ENABLE) | + (1 << ENDPOINT_0_INTERRUPT_ENABLE) | + (1 << DMA_DONE_INTERRUPT_ENABLE)); + net2272_write(dev, IRQENB1, + (1 << VBUS_INTERRUPT_ENABLE) | + (1 << ROOT_PORT_RESET_INTERRUPT_ENABLE) | + (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE)); +} + +/* when a driver is successfully registered, it will receive + * control requests including set_configuration(), which enables + * non-control requests. then usb traffic follows until a + * disconnect is reported. then a host may connect again, or + * the driver might get unbound. + */ +static int net2272_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver) +{ + struct net2272 *dev; + unsigned i; + + if (!driver || !driver->unbind || !driver->setup || + driver->max_speed != USB_SPEED_HIGH) + return -EINVAL; + + dev = container_of(_gadget, struct net2272, gadget); + + for (i = 0; i < 4; ++i) + dev->ep[i].irqs = 0; + /* hook up the driver ... */ + dev->softconnect = 1; + driver->driver.bus = NULL; + dev->driver = driver; + + /* ... then enable host detection and ep0; and we're ready + * for set_configuration as well as eventual disconnect. + */ + net2272_ep0_start(dev); + + dev_dbg(dev->dev, "%s ready\n", driver->driver.name); + + return 0; +} + +static void +stop_activity(struct net2272 *dev, struct usb_gadget_driver *driver) +{ + int i; + + /* don't disconnect if it's not connected */ + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = NULL; + + /* stop hardware; prevent new request submissions; + * and kill any outstanding requests. + */ + net2272_usb_reset(dev); + for (i = 0; i < 4; ++i) + net2272_dequeue_all(&dev->ep[i]); + + /* report disconnect; the driver is already quiesced */ + if (driver) { + spin_unlock(&dev->lock); + driver->disconnect(&dev->gadget); + spin_lock(&dev->lock); + } + + net2272_usb_reinit(dev); +} + +static int net2272_stop(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver) +{ + struct net2272 *dev; + unsigned long flags; + + dev = container_of(_gadget, struct net2272, gadget); + + spin_lock_irqsave(&dev->lock, flags); + stop_activity(dev, driver); + spin_unlock_irqrestore(&dev->lock, flags); + + dev->driver = NULL; + + dev_dbg(dev->dev, "unregistered driver '%s'\n", driver->driver.name); + return 0; +} + +/*---------------------------------------------------------------------------*/ +/* handle ep-a/ep-b dma completions */ +static void +net2272_handle_dma(struct net2272_ep *ep) +{ + struct net2272_request *req; + unsigned len; + int status; + + if (!list_empty(&ep->queue)) + req = list_entry(ep->queue.next, + struct net2272_request, queue); + else + req = NULL; + + dev_vdbg(ep->dev->dev, "handle_dma %s req %p\n", ep->ep.name, req); + + /* Ensure DREQ is de-asserted */ + net2272_write(ep->dev, DMAREQ, + (0 << DMA_BUFFER_VALID) + | (0 << DMA_REQUEST_ENABLE) + | (1 << DMA_CONTROL_DACK) + | (ep->dev->dma_eot_polarity << EOT_POLARITY) + | (ep->dev->dma_dack_polarity << DACK_POLARITY) + | (ep->dev->dma_dreq_polarity << DREQ_POLARITY) + | (ep->dma << DMA_ENDPOINT_SELECT)); + + ep->dev->dma_busy = 0; + + net2272_ep_write(ep, EP_IRQENB, + (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE) + | net2272_ep_read(ep, EP_IRQENB)); + + /* device-to-host transfer completed */ + if (ep->is_in) { + /* validate a short packet or zlp if necessary */ + if ((req->req.length % ep->ep.maxpacket != 0) || + req->req.zero) + set_fifo_bytecount(ep, 0); + + net2272_done(ep, req, 0); + if (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct net2272_request, queue); + status = net2272_kick_dma(ep, req); + if (status < 0) + net2272_pio_advance(ep); + } + + /* host-to-device transfer completed */ + } else { + /* terminated with a short packet? */ + if (net2272_read(ep->dev, IRQSTAT0) & + (1 << DMA_DONE_INTERRUPT)) { + /* abort system dma */ + net2272_cancel_dma(ep->dev); + } + + /* EP_TRANSFER will contain the number of bytes + * actually received. + * NOTE: There is no overflow detection on EP_TRANSFER: + * We can't deal with transfers larger than 2^24 bytes! + */ + len = (net2272_ep_read(ep, EP_TRANSFER2) << 16) + | (net2272_ep_read(ep, EP_TRANSFER1) << 8) + | (net2272_ep_read(ep, EP_TRANSFER0)); + + if (ep->not_empty) + len += 4; + + req->req.actual += len; + + /* get any remaining data */ + net2272_pio_advance(ep); + } +} + +/*---------------------------------------------------------------------------*/ + +static void +net2272_handle_ep(struct net2272_ep *ep) +{ + struct net2272_request *req; + u8 stat0, stat1; + + if (!list_empty(&ep->queue)) + req = list_entry(ep->queue.next, + struct net2272_request, queue); + else + req = NULL; + + /* ack all, and handle what we care about */ + stat0 = net2272_ep_read(ep, EP_STAT0); + stat1 = net2272_ep_read(ep, EP_STAT1); + ep->irqs++; + + dev_vdbg(ep->dev->dev, "%s ack ep_stat0 %02x, ep_stat1 %02x, req %p\n", + ep->ep.name, stat0, stat1, req ? &req->req : NULL); + + net2272_ep_write(ep, EP_STAT0, stat0 & + ~((1 << NAK_OUT_PACKETS) + | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT))); + net2272_ep_write(ep, EP_STAT1, stat1); + + /* data packet(s) received (in the fifo, OUT) + * direction must be validated, otherwise control read status phase + * could be interpreted as a valid packet + */ + if (!ep->is_in && (stat0 & (1 << DATA_PACKET_RECEIVED_INTERRUPT))) + net2272_pio_advance(ep); + /* data packet(s) transmitted (IN) */ + else if (stat0 & (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)) + net2272_pio_advance(ep); +} + +static struct net2272_ep * +net2272_get_ep_by_addr(struct net2272 *dev, u16 wIndex) +{ + struct net2272_ep *ep; + + if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0) + return &dev->ep[0]; + + list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) { + u8 bEndpointAddress; + + if (!ep->desc) + continue; + bEndpointAddress = ep->desc->bEndpointAddress; + if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) + continue; + if ((wIndex & 0x0f) == (bEndpointAddress & 0x0f)) + return ep; + } + return NULL; +} + +/* + * USB Test Packet: + * JKJKJKJK * 9 + * JJKKJJKK * 8 + * JJJJKKKK * 8 + * JJJJJJJKKKKKKK * 8 + * JJJJJJJK * 8 + * {JKKKKKKK * 10}, JK + */ +static const u8 net2272_test_packet[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, + 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, + 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, + 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFD, 0x7E +}; + +static void +net2272_set_test_mode(struct net2272 *dev, int mode) +{ + int i; + + /* Disable all net2272 interrupts: + * Nothing but a power cycle should stop the test. + */ + net2272_write(dev, IRQENB0, 0x00); + net2272_write(dev, IRQENB1, 0x00); + + /* Force tranceiver to high-speed */ + net2272_write(dev, XCVRDIAG, 1 << FORCE_HIGH_SPEED); + + net2272_write(dev, PAGESEL, 0); + net2272_write(dev, EP_STAT0, 1 << DATA_PACKET_TRANSMITTED_INTERRUPT); + net2272_write(dev, EP_RSPCLR, + (1 << CONTROL_STATUS_PHASE_HANDSHAKE) + | (1 << HIDE_STATUS_PHASE)); + net2272_write(dev, EP_CFG, 1 << ENDPOINT_DIRECTION); + net2272_write(dev, EP_STAT1, 1 << BUFFER_FLUSH); + + /* wait for status phase to complete */ + while (!(net2272_read(dev, EP_STAT0) & + (1 << DATA_PACKET_TRANSMITTED_INTERRUPT))) + ; + + /* Enable test mode */ + net2272_write(dev, USBTEST, mode); + + /* load test packet */ + if (mode == TEST_PACKET) { + /* switch to 8 bit mode */ + net2272_write(dev, LOCCTL, net2272_read(dev, LOCCTL) & + ~(1 << DATA_WIDTH)); + + for (i = 0; i < sizeof(net2272_test_packet); ++i) + net2272_write(dev, EP_DATA, net2272_test_packet[i]); + + /* Validate test packet */ + net2272_write(dev, EP_TRANSFER0, 0); + } +} + +static void +net2272_handle_stat0_irqs(struct net2272 *dev, u8 stat) +{ + struct net2272_ep *ep; + u8 num, scratch; + + /* starting a control request? */ + if (unlikely(stat & (1 << SETUP_PACKET_INTERRUPT))) { + union { + u8 raw[8]; + struct usb_ctrlrequest r; + } u; + int tmp = 0; + struct net2272_request *req; + + if (dev->gadget.speed == USB_SPEED_UNKNOWN) { + if (net2272_read(dev, USBCTL1) & (1 << USB_HIGH_SPEED)) + dev->gadget.speed = USB_SPEED_HIGH; + else + dev->gadget.speed = USB_SPEED_FULL; + dev_dbg(dev->dev, "%s\n", + usb_speed_string(dev->gadget.speed)); + } + + ep = &dev->ep[0]; + ep->irqs++; + + /* make sure any leftover interrupt state is cleared */ + stat &= ~(1 << ENDPOINT_0_INTERRUPT); + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct net2272_request, queue); + net2272_done(ep, req, + (req->req.actual == req->req.length) ? 0 : -EPROTO); + } + ep->stopped = 0; + dev->protocol_stall = 0; + net2272_ep_write(ep, EP_STAT0, + (1 << DATA_IN_TOKEN_INTERRUPT) + | (1 << DATA_OUT_TOKEN_INTERRUPT) + | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT) + | (1 << DATA_PACKET_RECEIVED_INTERRUPT) + | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)); + net2272_ep_write(ep, EP_STAT1, + (1 << TIMEOUT) + | (1 << USB_OUT_ACK_SENT) + | (1 << USB_OUT_NAK_SENT) + | (1 << USB_IN_ACK_RCVD) + | (1 << USB_IN_NAK_SENT) + | (1 << USB_STALL_SENT) + | (1 << LOCAL_OUT_ZLP)); + + /* + * Ensure Control Read pre-validation setting is beyond maximum size + * - Control Writes can leave non-zero values in EP_TRANSFER. If + * an EP0 transfer following the Control Write is a Control Read, + * the NET2272 sees the non-zero EP_TRANSFER as an unexpected + * pre-validation count. + * - Setting EP_TRANSFER beyond the maximum EP0 transfer size ensures + * the pre-validation count cannot cause an unexpected validatation + */ + net2272_write(dev, PAGESEL, 0); + net2272_write(dev, EP_TRANSFER2, 0xff); + net2272_write(dev, EP_TRANSFER1, 0xff); + net2272_write(dev, EP_TRANSFER0, 0xff); + + u.raw[0] = net2272_read(dev, SETUP0); + u.raw[1] = net2272_read(dev, SETUP1); + u.raw[2] = net2272_read(dev, SETUP2); + u.raw[3] = net2272_read(dev, SETUP3); + u.raw[4] = net2272_read(dev, SETUP4); + u.raw[5] = net2272_read(dev, SETUP5); + u.raw[6] = net2272_read(dev, SETUP6); + u.raw[7] = net2272_read(dev, SETUP7); + /* + * If you have a big endian cpu make sure le16_to_cpus + * performs the proper byte swapping here... + */ + le16_to_cpus(&u.r.wValue); + le16_to_cpus(&u.r.wIndex); + le16_to_cpus(&u.r.wLength); + + /* ack the irq */ + net2272_write(dev, IRQSTAT0, 1 << SETUP_PACKET_INTERRUPT); + stat ^= (1 << SETUP_PACKET_INTERRUPT); + + /* watch control traffic at the token level, and force + * synchronization before letting the status phase happen. + */ + ep->is_in = (u.r.bRequestType & USB_DIR_IN) != 0; + if (ep->is_in) { + scratch = (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE) + | (1 << DATA_OUT_TOKEN_INTERRUPT_ENABLE) + | (1 << DATA_IN_TOKEN_INTERRUPT_ENABLE); + stop_out_naking(ep); + } else + scratch = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE) + | (1 << DATA_OUT_TOKEN_INTERRUPT_ENABLE) + | (1 << DATA_IN_TOKEN_INTERRUPT_ENABLE); + net2272_ep_write(ep, EP_IRQENB, scratch); + + if ((u.r.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) + goto delegate; + switch (u.r.bRequest) { + case USB_REQ_GET_STATUS: { + struct net2272_ep *e; + u16 status = 0; + + switch (u.r.bRequestType & USB_RECIP_MASK) { + case USB_RECIP_ENDPOINT: + e = net2272_get_ep_by_addr(dev, u.r.wIndex); + if (!e || u.r.wLength > 2) + goto do_stall; + if (net2272_ep_read(e, EP_RSPSET) & (1 << ENDPOINT_HALT)) + status = __constant_cpu_to_le16(1); + else + status = __constant_cpu_to_le16(0); + + /* don't bother with a request object! */ + net2272_ep_write(&dev->ep[0], EP_IRQENB, 0); + writew(status, net2272_reg_addr(dev, EP_DATA)); + set_fifo_bytecount(&dev->ep[0], 0); + allow_status(ep); + dev_vdbg(dev->dev, "%s stat %02x\n", + ep->ep.name, status); + goto next_endpoints; + case USB_RECIP_DEVICE: + if (u.r.wLength > 2) + goto do_stall; + if (dev->is_selfpowered) + status = (1 << USB_DEVICE_SELF_POWERED); + + /* don't bother with a request object! */ + net2272_ep_write(&dev->ep[0], EP_IRQENB, 0); + writew(status, net2272_reg_addr(dev, EP_DATA)); + set_fifo_bytecount(&dev->ep[0], 0); + allow_status(ep); + dev_vdbg(dev->dev, "device stat %02x\n", status); + goto next_endpoints; + case USB_RECIP_INTERFACE: + if (u.r.wLength > 2) + goto do_stall; + + /* don't bother with a request object! */ + net2272_ep_write(&dev->ep[0], EP_IRQENB, 0); + writew(status, net2272_reg_addr(dev, EP_DATA)); + set_fifo_bytecount(&dev->ep[0], 0); + allow_status(ep); + dev_vdbg(dev->dev, "interface status %02x\n", status); + goto next_endpoints; + } + + break; + } + case USB_REQ_CLEAR_FEATURE: { + struct net2272_ep *e; + + if (u.r.bRequestType != USB_RECIP_ENDPOINT) + goto delegate; + if (u.r.wValue != USB_ENDPOINT_HALT || + u.r.wLength != 0) + goto do_stall; + e = net2272_get_ep_by_addr(dev, u.r.wIndex); + if (!e) + goto do_stall; + if (e->wedged) { + dev_vdbg(dev->dev, "%s wedged, halt not cleared\n", + ep->ep.name); + } else { + dev_vdbg(dev->dev, "%s clear halt\n", ep->ep.name); + clear_halt(e); + } + allow_status(ep); + goto next_endpoints; + } + case USB_REQ_SET_FEATURE: { + struct net2272_ep *e; + + if (u.r.bRequestType == USB_RECIP_DEVICE) { + if (u.r.wIndex != NORMAL_OPERATION) + net2272_set_test_mode(dev, (u.r.wIndex >> 8)); + allow_status(ep); + dev_vdbg(dev->dev, "test mode: %d\n", u.r.wIndex); + goto next_endpoints; + } else if (u.r.bRequestType != USB_RECIP_ENDPOINT) + goto delegate; + if (u.r.wValue != USB_ENDPOINT_HALT || + u.r.wLength != 0) + goto do_stall; + e = net2272_get_ep_by_addr(dev, u.r.wIndex); + if (!e) + goto do_stall; + set_halt(e); + allow_status(ep); + dev_vdbg(dev->dev, "%s set halt\n", ep->ep.name); + goto next_endpoints; + } + case USB_REQ_SET_ADDRESS: { + net2272_write(dev, OURADDR, u.r.wValue & 0xff); + allow_status(ep); + break; + } + default: + delegate: + dev_vdbg(dev->dev, "setup %02x.%02x v%04x i%04x " + "ep_cfg %08x\n", + u.r.bRequestType, u.r.bRequest, + u.r.wValue, u.r.wIndex, + net2272_ep_read(ep, EP_CFG)); + spin_unlock(&dev->lock); + tmp = dev->driver->setup(&dev->gadget, &u.r); + spin_lock(&dev->lock); + } + + /* stall ep0 on error */ + if (tmp < 0) { + do_stall: + dev_vdbg(dev->dev, "req %02x.%02x protocol STALL; stat %d\n", + u.r.bRequestType, u.r.bRequest, tmp); + dev->protocol_stall = 1; + } + /* endpoint dma irq? */ + } else if (stat & (1 << DMA_DONE_INTERRUPT)) { + net2272_cancel_dma(dev); + net2272_write(dev, IRQSTAT0, 1 << DMA_DONE_INTERRUPT); + stat &= ~(1 << DMA_DONE_INTERRUPT); + num = (net2272_read(dev, DMAREQ) & (1 << DMA_ENDPOINT_SELECT)) + ? 2 : 1; + + ep = &dev->ep[num]; + net2272_handle_dma(ep); + } + + next_endpoints: + /* endpoint data irq? */ + scratch = stat & 0x0f; + stat &= ~0x0f; + for (num = 0; scratch; num++) { + u8 t; + + /* does this endpoint's FIFO and queue need tending? */ + t = 1 << num; + if ((scratch & t) == 0) + continue; + scratch ^= t; + + ep = &dev->ep[num]; + net2272_handle_ep(ep); + } + + /* some interrupts we can just ignore */ + stat &= ~(1 << SOF_INTERRUPT); + + if (stat) + dev_dbg(dev->dev, "unhandled irqstat0 %02x\n", stat); +} + +static void +net2272_handle_stat1_irqs(struct net2272 *dev, u8 stat) +{ + u8 tmp, mask; + + /* after disconnect there's nothing else to do! */ + tmp = (1 << VBUS_INTERRUPT) | (1 << ROOT_PORT_RESET_INTERRUPT); + mask = (1 << USB_HIGH_SPEED) | (1 << USB_FULL_SPEED); + + if (stat & tmp) { + net2272_write(dev, IRQSTAT1, tmp); + if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) && + ((net2272_read(dev, USBCTL1) & mask) == 0)) + || ((net2272_read(dev, USBCTL1) & (1 << VBUS_PIN)) + == 0)) + && (dev->gadget.speed != USB_SPEED_UNKNOWN)) { + dev_dbg(dev->dev, "disconnect %s\n", + dev->driver->driver.name); + stop_activity(dev, dev->driver); + net2272_ep0_start(dev); + return; + } + stat &= ~tmp; + + if (!stat) + return; + } + + tmp = (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT); + if (stat & tmp) { + net2272_write(dev, IRQSTAT1, tmp); + if (stat & (1 << SUSPEND_REQUEST_INTERRUPT)) { + if (dev->driver->suspend) + dev->driver->suspend(&dev->gadget); + if (!enable_suspend) { + stat &= ~(1 << SUSPEND_REQUEST_INTERRUPT); + dev_dbg(dev->dev, "Suspend disabled, ignoring\n"); + } + } else { + if (dev->driver->resume) + dev->driver->resume(&dev->gadget); + } + stat &= ~tmp; + } + + /* clear any other status/irqs */ + if (stat) + net2272_write(dev, IRQSTAT1, stat); + + /* some status we can just ignore */ + stat &= ~((1 << CONTROL_STATUS_INTERRUPT) + | (1 << SUSPEND_REQUEST_INTERRUPT) + | (1 << RESUME_INTERRUPT)); + if (!stat) + return; + else + dev_dbg(dev->dev, "unhandled irqstat1 %02x\n", stat); +} + +static irqreturn_t net2272_irq(int irq, void *_dev) +{ + struct net2272 *dev = _dev; +#if defined(PLX_PCI_RDK) || defined(PLX_PCI_RDK2) + u32 intcsr; +#endif +#if defined(PLX_PCI_RDK) + u8 dmareq; +#endif + spin_lock(&dev->lock); +#if defined(PLX_PCI_RDK) + intcsr = readl(dev->rdk1.plx9054_base_addr + INTCSR); + + if ((intcsr & LOCAL_INTERRUPT_TEST) == LOCAL_INTERRUPT_TEST) { + writel(intcsr & ~(1 << PCI_INTERRUPT_ENABLE), + dev->rdk1.plx9054_base_addr + INTCSR); + net2272_handle_stat1_irqs(dev, net2272_read(dev, IRQSTAT1)); + net2272_handle_stat0_irqs(dev, net2272_read(dev, IRQSTAT0)); + intcsr = readl(dev->rdk1.plx9054_base_addr + INTCSR); + writel(intcsr | (1 << PCI_INTERRUPT_ENABLE), + dev->rdk1.plx9054_base_addr + INTCSR); + } + if ((intcsr & DMA_CHANNEL_0_TEST) == DMA_CHANNEL_0_TEST) { + writeb((1 << CHANNEL_CLEAR_INTERRUPT | (0 << CHANNEL_ENABLE)), + dev->rdk1.plx9054_base_addr + DMACSR0); + + dmareq = net2272_read(dev, DMAREQ); + if (dmareq & 0x01) + net2272_handle_dma(&dev->ep[2]); + else + net2272_handle_dma(&dev->ep[1]); + } +#endif +#if defined(PLX_PCI_RDK2) + /* see if PCI int for us by checking irqstat */ + intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT); + if (!intcsr & (1 << NET2272_PCI_IRQ)) { + spin_unlock(&dev->lock); + return IRQ_NONE; + } + /* check dma interrupts */ +#endif + /* Platform/devcice interrupt handler */ +#if !defined(PLX_PCI_RDK) + net2272_handle_stat1_irqs(dev, net2272_read(dev, IRQSTAT1)); + net2272_handle_stat0_irqs(dev, net2272_read(dev, IRQSTAT0)); +#endif + spin_unlock(&dev->lock); + + return IRQ_HANDLED; +} + +static int net2272_present(struct net2272 *dev) +{ + /* + * Quick test to see if CPU can communicate properly with the NET2272. + * Verifies connection using writes and reads to write/read and + * read-only registers. + * + * This routine is strongly recommended especially during early bring-up + * of new hardware, however for designs that do not apply Power On System + * Tests (POST) it may discarded (or perhaps minimized). + */ + unsigned int ii; + u8 val, refval; + + /* Verify NET2272 write/read SCRATCH register can write and read */ + refval = net2272_read(dev, SCRATCH); + for (ii = 0; ii < 0x100; ii += 7) { + net2272_write(dev, SCRATCH, ii); + val = net2272_read(dev, SCRATCH); + if (val != ii) { + dev_dbg(dev->dev, + "%s: write/read SCRATCH register test failed: " + "wrote:0x%2.2x, read:0x%2.2x\n", + __func__, ii, val); + return -EINVAL; + } + } + /* To be nice, we write the original SCRATCH value back: */ + net2272_write(dev, SCRATCH, refval); + + /* Verify NET2272 CHIPREV register is read-only: */ + refval = net2272_read(dev, CHIPREV_2272); + for (ii = 0; ii < 0x100; ii += 7) { + net2272_write(dev, CHIPREV_2272, ii); + val = net2272_read(dev, CHIPREV_2272); + if (val != refval) { + dev_dbg(dev->dev, + "%s: write/read CHIPREV register test failed: " + "wrote 0x%2.2x, read:0x%2.2x expected:0x%2.2x\n", + __func__, ii, val, refval); + return -EINVAL; + } + } + + /* + * Verify NET2272's "NET2270 legacy revision" register + * - NET2272 has two revision registers. The NET2270 legacy revision + * register should read the same value, regardless of the NET2272 + * silicon revision. The legacy register applies to NET2270 + * firmware being applied to the NET2272. + */ + val = net2272_read(dev, CHIPREV_LEGACY); + if (val != NET2270_LEGACY_REV) { + /* + * Unexpected legacy revision value + * - Perhaps the chip is a NET2270? + */ + dev_dbg(dev->dev, + "%s: WARNING: UNEXPECTED NET2272 LEGACY REGISTER VALUE:\n" + " - CHIPREV_LEGACY: expected 0x%2.2x, got:0x%2.2x. (Not NET2272?)\n", + __func__, NET2270_LEGACY_REV, val); + return -EINVAL; + } + + /* + * Verify NET2272 silicon revision + * - This revision register is appropriate for the silicon version + * of the NET2272 + */ + val = net2272_read(dev, CHIPREV_2272); + switch (val) { + case CHIPREV_NET2272_R1: + /* + * NET2272 Rev 1 has DMA related errata: + * - Newer silicon (Rev 1A or better) required + */ + dev_dbg(dev->dev, + "%s: Rev 1 detected: newer silicon recommended for DMA support\n", + __func__); + break; + case CHIPREV_NET2272_R1A: + break; + default: + /* NET2272 silicon version *may* not work with this firmware */ + dev_dbg(dev->dev, + "%s: unexpected silicon revision register value: " + " CHIPREV_2272: 0x%2.2x\n", + __func__, val); + /* + * Return Success, even though the chip rev is not an expected value + * - Older, pre-built firmware can attempt to operate on newer silicon + * - Often, new silicon is perfectly compatible + */ + } + + /* Success: NET2272 checks out OK */ + return 0; +} + +static void +net2272_gadget_release(struct device *_dev) +{ + struct net2272 *dev = dev_get_drvdata(_dev); + kfree(dev); +} + +/*---------------------------------------------------------------------------*/ + +static void +net2272_remove(struct net2272 *dev) +{ + usb_del_gadget_udc(&dev->gadget); + + /* start with the driver above us */ + if (dev->driver) { + /* should have been done already by driver model core */ + dev_warn(dev->dev, "pci remove, driver '%s' is still registered\n", + dev->driver->driver.name); + usb_gadget_unregister_driver(dev->driver); + } + + free_irq(dev->irq, dev); + iounmap(dev->base_addr); + + device_remove_file(dev->dev, &dev_attr_registers); + + dev_info(dev->dev, "unbind\n"); +} + +static struct net2272 *net2272_probe_init(struct device *dev, unsigned int irq) +{ + struct net2272 *ret; + + if (!irq) { + dev_dbg(dev, "No IRQ!\n"); + return ERR_PTR(-ENODEV); + } + + /* alloc, and start init */ + ret = kzalloc(sizeof(*ret), GFP_KERNEL); + if (!ret) + return ERR_PTR(-ENOMEM); + + spin_lock_init(&ret->lock); + ret->irq = irq; + ret->dev = dev; + ret->gadget.ops = &net2272_ops; + ret->gadget.max_speed = USB_SPEED_HIGH; + + /* the "gadget" abstracts/virtualizes the controller */ + ret->gadget.name = driver_name; + + return ret; +} + +static int +net2272_probe_fin(struct net2272 *dev, unsigned int irqflags) +{ + int ret; + + /* See if there... */ + if (net2272_present(dev)) { + dev_warn(dev->dev, "2272 not found!\n"); + ret = -ENODEV; + goto err; + } + + net2272_usb_reset(dev); + net2272_usb_reinit(dev); + + ret = request_irq(dev->irq, net2272_irq, irqflags, driver_name, dev); + if (ret) { + dev_err(dev->dev, "request interrupt %i failed\n", dev->irq); + goto err; + } + + dev->chiprev = net2272_read(dev, CHIPREV_2272); + + /* done */ + dev_info(dev->dev, "%s\n", driver_desc); + dev_info(dev->dev, "irq %i, mem %p, chip rev %04x, dma %s\n", + dev->irq, dev->base_addr, dev->chiprev, + dma_mode_string()); + dev_info(dev->dev, "version: %s\n", driver_vers); + + ret = device_create_file(dev->dev, &dev_attr_registers); + if (ret) + goto err_irq; + + ret = usb_add_gadget_udc_release(dev->dev, &dev->gadget, + net2272_gadget_release); + if (ret) + goto err_add_udc; + + return 0; + +err_add_udc: + device_remove_file(dev->dev, &dev_attr_registers); + err_irq: + free_irq(dev->irq, dev); + err: + return ret; +} + +#ifdef CONFIG_PCI + +/* + * wrap this driver around the specified device, but + * don't respond over USB until a gadget driver binds to us + */ + +static int +net2272_rdk1_probe(struct pci_dev *pdev, struct net2272 *dev) +{ + unsigned long resource, len, tmp; + void __iomem *mem_mapped_addr[4]; + int ret, i; + + /* + * BAR 0 holds PLX 9054 config registers + * BAR 1 is i/o memory; unused here + * BAR 2 holds EPLD config registers + * BAR 3 holds NET2272 registers + */ + + /* Find and map all address spaces */ + for (i = 0; i < 4; ++i) { + if (i == 1) + continue; /* BAR1 unused */ + + resource = pci_resource_start(pdev, i); + len = pci_resource_len(pdev, i); + + if (!request_mem_region(resource, len, driver_name)) { + dev_dbg(dev->dev, "controller already in use\n"); + ret = -EBUSY; + goto err; + } + + mem_mapped_addr[i] = ioremap_nocache(resource, len); + if (mem_mapped_addr[i] == NULL) { + release_mem_region(resource, len); + dev_dbg(dev->dev, "can't map memory\n"); + ret = -EFAULT; + goto err; + } + } + + dev->rdk1.plx9054_base_addr = mem_mapped_addr[0]; + dev->rdk1.epld_base_addr = mem_mapped_addr[2]; + dev->base_addr = mem_mapped_addr[3]; + + /* Set PLX 9054 bus width (16 bits) */ + tmp = readl(dev->rdk1.plx9054_base_addr + LBRD1); + writel((tmp & ~(3 << MEMORY_SPACE_LOCAL_BUS_WIDTH)) | W16_BIT, + dev->rdk1.plx9054_base_addr + LBRD1); + + /* Enable PLX 9054 Interrupts */ + writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) | + (1 << PCI_INTERRUPT_ENABLE) | + (1 << LOCAL_INTERRUPT_INPUT_ENABLE), + dev->rdk1.plx9054_base_addr + INTCSR); + + writeb((1 << CHANNEL_CLEAR_INTERRUPT | (0 << CHANNEL_ENABLE)), + dev->rdk1.plx9054_base_addr + DMACSR0); + + /* reset */ + writeb((1 << EPLD_DMA_ENABLE) | + (1 << DMA_CTL_DACK) | + (1 << DMA_TIMEOUT_ENABLE) | + (1 << USER) | + (0 << MPX_MODE) | + (1 << BUSWIDTH) | + (1 << NET2272_RESET), + dev->base_addr + EPLD_IO_CONTROL_REGISTER); + + mb(); + writeb(readb(dev->base_addr + EPLD_IO_CONTROL_REGISTER) & + ~(1 << NET2272_RESET), + dev->base_addr + EPLD_IO_CONTROL_REGISTER); + udelay(200); + + return 0; + + err: + while (--i >= 0) { + iounmap(mem_mapped_addr[i]); + release_mem_region(pci_resource_start(pdev, i), + pci_resource_len(pdev, i)); + } + + return ret; +} + +static int +net2272_rdk2_probe(struct pci_dev *pdev, struct net2272 *dev) +{ + unsigned long resource, len; + void __iomem *mem_mapped_addr[2]; + int ret, i; + + /* + * BAR 0 holds FGPA config registers + * BAR 1 holds NET2272 registers + */ + + /* Find and map all address spaces, bar2-3 unused in rdk 2 */ + for (i = 0; i < 2; ++i) { + resource = pci_resource_start(pdev, i); + len = pci_resource_len(pdev, i); + + if (!request_mem_region(resource, len, driver_name)) { + dev_dbg(dev->dev, "controller already in use\n"); + ret = -EBUSY; + goto err; + } + + mem_mapped_addr[i] = ioremap_nocache(resource, len); + if (mem_mapped_addr[i] == NULL) { + release_mem_region(resource, len); + dev_dbg(dev->dev, "can't map memory\n"); + ret = -EFAULT; + goto err; + } + } + + dev->rdk2.fpga_base_addr = mem_mapped_addr[0]; + dev->base_addr = mem_mapped_addr[1]; + + mb(); + /* Set 2272 bus width (16 bits) and reset */ + writel((1 << CHIP_RESET), dev->rdk2.fpga_base_addr + RDK2_LOCCTLRDK); + udelay(200); + writel((1 << BUS_WIDTH), dev->rdk2.fpga_base_addr + RDK2_LOCCTLRDK); + /* Print fpga version number */ + dev_info(dev->dev, "RDK2 FPGA version %08x\n", + readl(dev->rdk2.fpga_base_addr + RDK2_FPGAREV)); + /* Enable FPGA Interrupts */ + writel((1 << NET2272_PCI_IRQ), dev->rdk2.fpga_base_addr + RDK2_IRQENB); + + return 0; + + err: + while (--i >= 0) { + iounmap(mem_mapped_addr[i]); + release_mem_region(pci_resource_start(pdev, i), + pci_resource_len(pdev, i)); + } + + return ret; +} + +static int +net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct net2272 *dev; + int ret; + + dev = net2272_probe_init(&pdev->dev, pdev->irq); + if (IS_ERR(dev)) + return PTR_ERR(dev); + dev->dev_id = pdev->device; + + if (pci_enable_device(pdev) < 0) { + ret = -ENODEV; + goto err_free; + } + + pci_set_master(pdev); + + switch (pdev->device) { + case PCI_DEVICE_ID_RDK1: ret = net2272_rdk1_probe(pdev, dev); break; + case PCI_DEVICE_ID_RDK2: ret = net2272_rdk2_probe(pdev, dev); break; + default: BUG(); + } + if (ret) + goto err_pci; + + ret = net2272_probe_fin(dev, 0); + if (ret) + goto err_pci; + + pci_set_drvdata(pdev, dev); + + return 0; + + err_pci: + pci_disable_device(pdev); + err_free: + kfree(dev); + + return ret; +} + +static void +net2272_rdk1_remove(struct pci_dev *pdev, struct net2272 *dev) +{ + int i; + + /* disable PLX 9054 interrupts */ + writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) & + ~(1 << PCI_INTERRUPT_ENABLE), + dev->rdk1.plx9054_base_addr + INTCSR); + + /* clean up resources allocated during probe() */ + iounmap(dev->rdk1.plx9054_base_addr); + iounmap(dev->rdk1.epld_base_addr); + + for (i = 0; i < 4; ++i) { + if (i == 1) + continue; /* BAR1 unused */ + release_mem_region(pci_resource_start(pdev, i), + pci_resource_len(pdev, i)); + } +} + +static void +net2272_rdk2_remove(struct pci_dev *pdev, struct net2272 *dev) +{ + int i; + + /* disable fpga interrupts + writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) & + ~(1 << PCI_INTERRUPT_ENABLE), + dev->rdk1.plx9054_base_addr + INTCSR); + */ + + /* clean up resources allocated during probe() */ + iounmap(dev->rdk2.fpga_base_addr); + + for (i = 0; i < 2; ++i) + release_mem_region(pci_resource_start(pdev, i), + pci_resource_len(pdev, i)); +} + +static void +net2272_pci_remove(struct pci_dev *pdev) +{ + struct net2272 *dev = pci_get_drvdata(pdev); + + net2272_remove(dev); + + switch (pdev->device) { + case PCI_DEVICE_ID_RDK1: net2272_rdk1_remove(pdev, dev); break; + case PCI_DEVICE_ID_RDK2: net2272_rdk2_remove(pdev, dev); break; + default: BUG(); + } + + pci_disable_device(pdev); + + kfree(dev); +} + +/* Table of matching PCI IDs */ +static struct pci_device_id pci_ids[] = { + { /* RDK 1 card */ + .class = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe), + .class_mask = 0, + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_RDK1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, + { /* RDK 2 card */ + .class = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe), + .class_mask = 0, + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_RDK2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, + { } +}; +MODULE_DEVICE_TABLE(pci, pci_ids); + +static struct pci_driver net2272_pci_driver = { + .name = driver_name, + .id_table = pci_ids, + + .probe = net2272_pci_probe, + .remove = net2272_pci_remove, +}; + +static int net2272_pci_register(void) +{ + return pci_register_driver(&net2272_pci_driver); +} + +static void net2272_pci_unregister(void) +{ + pci_unregister_driver(&net2272_pci_driver); +} + +#else +static inline int net2272_pci_register(void) { return 0; } +static inline void net2272_pci_unregister(void) { } +#endif + +/*---------------------------------------------------------------------------*/ + +static int +net2272_plat_probe(struct platform_device *pdev) +{ + struct net2272 *dev; + int ret; + unsigned int irqflags; + resource_size_t base, len; + struct resource *iomem, *iomem_bus, *irq_res; + + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iomem_bus = platform_get_resource(pdev, IORESOURCE_BUS, 0); + if (!irq_res || !iomem) { + dev_err(&pdev->dev, "must provide irq/base addr"); + return -EINVAL; + } + + dev = net2272_probe_init(&pdev->dev, irq_res->start); + if (IS_ERR(dev)) + return PTR_ERR(dev); + + irqflags = 0; + if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE) + irqflags |= IRQF_TRIGGER_RISING; + if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE) + irqflags |= IRQF_TRIGGER_FALLING; + if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL) + irqflags |= IRQF_TRIGGER_HIGH; + if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL) + irqflags |= IRQF_TRIGGER_LOW; + + base = iomem->start; + len = resource_size(iomem); + if (iomem_bus) + dev->base_shift = iomem_bus->start; + + if (!request_mem_region(base, len, driver_name)) { + dev_dbg(dev->dev, "get request memory region!\n"); + ret = -EBUSY; + goto err; + } + dev->base_addr = ioremap_nocache(base, len); + if (!dev->base_addr) { + dev_dbg(dev->dev, "can't map memory\n"); + ret = -EFAULT; + goto err_req; + } + + ret = net2272_probe_fin(dev, IRQF_TRIGGER_LOW); + if (ret) + goto err_io; + + platform_set_drvdata(pdev, dev); + dev_info(&pdev->dev, "running in 16-bit, %sbyte swap local bus mode\n", + (net2272_read(dev, LOCCTL) & (1 << BYTE_SWAP)) ? "" : "no "); + + return 0; + + err_io: + iounmap(dev->base_addr); + err_req: + release_mem_region(base, len); + err: + return ret; +} + +static int +net2272_plat_remove(struct platform_device *pdev) +{ + struct net2272 *dev = platform_get_drvdata(pdev); + + net2272_remove(dev); + + release_mem_region(pdev->resource[0].start, + resource_size(&pdev->resource[0])); + + kfree(dev); + + return 0; +} + +static struct platform_driver net2272_plat_driver = { + .probe = net2272_plat_probe, + .remove = net2272_plat_remove, + .driver = { + .name = driver_name, + .owner = THIS_MODULE, + }, + /* FIXME .suspend, .resume */ +}; +MODULE_ALIAS("platform:net2272"); + +static int __init net2272_init(void) +{ + int ret; + + ret = net2272_pci_register(); + if (ret) + return ret; + ret = platform_driver_register(&net2272_plat_driver); + if (ret) + goto err_pci; + return ret; + +err_pci: + net2272_pci_unregister(); + return ret; +} +module_init(net2272_init); + +static void __exit net2272_cleanup(void) +{ + net2272_pci_unregister(); + platform_driver_unregister(&net2272_plat_driver); +} +module_exit(net2272_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("PLX Technology, Inc."); +MODULE_LICENSE("GPL"); |