diff options
Diffstat (limited to 'drivers/usb/gadget/fsl_mxc_udc.c')
| -rw-r--r-- | drivers/usb/gadget/fsl_mxc_udc.c | 118 |
1 files changed, 59 insertions, 59 deletions
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index dcbc0a2e48d..9b140fc4d3b 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -18,13 +18,13 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <mach/hardware.h> - static struct clk *mxc_ahb_clk; -static struct clk *mxc_usb_clk; +static struct clk *mxc_per_clk; +static struct clk *mxc_ipg_clk; /* workaround ENGcm09152 for i.MX35 */ -#define USBPHYCTRL_OTGBASE_OFFSET 0x608 +#define MX35_USBPHYCTRL_OFFSET 0x600 +#define USBPHYCTRL_OTGBASE_OFFSET 0x8 #define USBPHYCTRL_EVDO (1 << 23) int fsl_udc_clk_init(struct platform_device *pdev) @@ -33,30 +33,33 @@ int fsl_udc_clk_init(struct platform_device *pdev) unsigned long freq; int ret; - pdata = pdev->dev.platform_data; + pdata = dev_get_platdata(&pdev->dev); - if (!cpu_is_mx35() && !cpu_is_mx25()) { - mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb"); - if (IS_ERR(mxc_ahb_clk)) - return PTR_ERR(mxc_ahb_clk); + mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(mxc_ipg_clk)) { + dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n"); + return PTR_ERR(mxc_ipg_clk); + } - ret = clk_enable(mxc_ahb_clk); - if (ret < 0) { - dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n"); - goto eenahb; - } + mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(mxc_ahb_clk)) { + dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n"); + return PTR_ERR(mxc_ahb_clk); } - /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ - mxc_usb_clk = clk_get(&pdev->dev, "usb"); - if (IS_ERR(mxc_usb_clk)) { - dev_err(&pdev->dev, "clk_get(\"usb\") failed\n"); - ret = PTR_ERR(mxc_usb_clk); - goto egusb; + mxc_per_clk = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(mxc_per_clk)) { + dev_err(&pdev->dev, "clk_get(\"per\") failed\n"); + return PTR_ERR(mxc_per_clk); } - if (!cpu_is_mx51()) { - freq = clk_get_rate(mxc_usb_clk); + clk_prepare_enable(mxc_ipg_clk); + clk_prepare_enable(mxc_ahb_clk); + clk_prepare_enable(mxc_per_clk); + + /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ + if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) { + freq = clk_get_rate(mxc_per_clk); if (pdata->phy_mode != FSL_USB2_PHY_ULPI && (freq < 59999000 || freq > 60001000)) { dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq); @@ -65,59 +68,56 @@ int fsl_udc_clk_init(struct platform_device *pdev) } } - ret = clk_enable(mxc_usb_clk); - if (ret < 0) { - dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n"); - goto eenusb; - } - return 0; -eenusb: eclkrate: - clk_put(mxc_usb_clk); - mxc_usb_clk = NULL; -egusb: - if (!cpu_is_mx35()) - clk_disable(mxc_ahb_clk); -eenahb: - if (!cpu_is_mx35()) - clk_put(mxc_ahb_clk); + clk_disable_unprepare(mxc_ipg_clk); + clk_disable_unprepare(mxc_ahb_clk); + clk_disable_unprepare(mxc_per_clk); + mxc_per_clk = NULL; return ret; } -void fsl_udc_clk_finalize(struct platform_device *pdev) +int fsl_udc_clk_finalize(struct platform_device *pdev) { - struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - if (cpu_is_mx35()) { - unsigned int v; + struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); + int ret = 0; - /* workaround ENGcm09152 for i.MX35 */ - if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); - writel(v | USBPHYCTRL_EVDO, - MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); + /* workaround ENGcm09152 for i.MX35 */ + if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { + unsigned int v; + struct resource *res = platform_get_resource + (pdev, IORESOURCE_MEM, 0); + void __iomem *phy_regs = ioremap(res->start + + MX35_USBPHYCTRL_OFFSET, 512); + if (!phy_regs) { + dev_err(&pdev->dev, "ioremap for phy address fails\n"); + ret = -EINVAL; + goto ioremap_err; } + + v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET); + writel(v | USBPHYCTRL_EVDO, + phy_regs + USBPHYCTRL_OTGBASE_OFFSET); + + iounmap(phy_regs); } + +ioremap_err: /* ULPI transceivers don't need usbpll */ if (pdata->phy_mode == FSL_USB2_PHY_ULPI) { - clk_disable(mxc_usb_clk); - clk_put(mxc_usb_clk); - mxc_usb_clk = NULL; + clk_disable_unprepare(mxc_per_clk); + mxc_per_clk = NULL; } + + return ret; } void fsl_udc_clk_release(void) { - if (mxc_usb_clk) { - clk_disable(mxc_usb_clk); - clk_put(mxc_usb_clk); - } - if (!cpu_is_mx35()) { - clk_disable(mxc_ahb_clk); - clk_put(mxc_ahb_clk); - } + if (mxc_per_clk) + clk_disable_unprepare(mxc_per_clk); + clk_disable_unprepare(mxc_ahb_clk); + clk_disable_unprepare(mxc_ipg_clk); } |