diff options
Diffstat (limited to 'drivers/usb/early')
| -rw-r--r-- | drivers/usb/early/ehci-dbgp.c | 39 |
1 files changed, 25 insertions, 14 deletions
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index 94ecdbc758c..8cfc3191be5 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -20,6 +20,7 @@ #include <linux/usb/ehci_def.h> #include <linux/delay.h> #include <linux/serial_core.h> +#include <linux/kconfig.h> #include <linux/kgdb.h> #include <linux/kthread.h> #include <asm/io.h> @@ -102,6 +103,9 @@ static struct kgdb_io kgdbdbgp_io_ops; #define dbgp_kgdb_mode (0) #endif +/* Local version of HC_LENGTH macro as ehci struct is not available here */ +#define EARLY_HC_LENGTH(p) (0x00ff & (p)) /* bits 7 : 0 */ + /* * USB Packet IDs (PIDs) */ @@ -331,7 +335,7 @@ static int dbgp_control_msg(unsigned devnum, int requesttype, int ret; read = (requesttype & USB_DIR_IN) != 0; - if (size > (read ? DBGP_MAX_PACKET:0)) + if (size > (read ? DBGP_MAX_PACKET : 0)) return -1; /* Compute the control message */ @@ -447,7 +451,7 @@ static int dbgp_ehci_startup(void) writel(FLAG_CF, &ehci_regs->configured_flag); /* Wait until the controller is no longer halted */ - loop = 10; + loop = 1000; do { status = readl(&ehci_regs->status); if (!(status & STS_HALT)) @@ -488,7 +492,7 @@ static int ehci_wait_for_port(int port); * Return -ENODEV for any general failure * Return -EIO if wait for port fails */ -int dbgp_external_startup(void) +static int _dbgp_external_startup(void) { int devnum; struct usb_debug_descriptor dbgp_desc; @@ -564,10 +568,6 @@ try_again: dbgp_printk("Could not find attached debug device\n"); goto err; } - if (ret < 0) { - dbgp_printk("Attached device is not a debug device\n"); - goto err; - } dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint; dbgp_endpoint_in = dbgp_desc.bDebugInEndpoint; @@ -601,7 +601,7 @@ try_again: dbgp_printk("dbgp_bulk_write failed: %d\n", ret); goto err; } - dbgp_printk("small write doned\n"); + dbgp_printk("small write done\n"); dbgp_not_safe = 0; return 0; @@ -610,7 +610,6 @@ err: goto try_again; return -ENODEV; } -EXPORT_SYMBOL_GPL(dbgp_external_startup); static int ehci_reset_port(int port) { @@ -648,7 +647,7 @@ static int ehci_reset_port(int port) if (!(portsc & PORT_CONNECT)) return -ENOTCONN; - /* bomb out completely if something weird happend */ + /* bomb out completely if something weird happened */ if ((portsc & PORT_CSC)) return -EINVAL; @@ -801,7 +800,7 @@ try_next_port: dbgp_ehci_status("ehci skip - already configured"); } - ret = dbgp_external_startup(); + ret = _dbgp_external_startup(); if (ret == -EIO) goto next_debug_port; @@ -892,7 +891,7 @@ int __init early_dbgp_init(char *s) dbgp_printk("ehci_bar: %p\n", ehci_bar); ehci_caps = ehci_bar; - ehci_regs = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase)); + ehci_regs = ehci_bar + EARLY_HC_LENGTH(readl(&ehci_caps->hc_capbase)); ehci_debug = ehci_bar + offset; ehci_dev.bus = bus; ehci_dev.slot = slot; @@ -931,7 +930,7 @@ static void early_dbgp_write(struct console *con, const char *str, u32 n) ctrl = readl(&ehci_debug->control); if (!(ctrl & DBGP_ENABLED)) { dbgp_not_safe = 1; - dbgp_external_startup(); + _dbgp_external_startup(); } else { cmd |= CMD_RUN; writel(cmd, &ehci_regs->command); @@ -971,10 +970,15 @@ struct console early_dbgp_console = { .index = -1, }; -int dbgp_reset_prep(void) +#if IS_ENABLED(CONFIG_USB) +int dbgp_reset_prep(struct usb_hcd *hcd) { + int ret = xen_dbgp_reset_prep(hcd); u32 ctrl; + if (ret) + return ret; + dbgp_not_safe = 1; if (!ehci_debug) return 0; @@ -995,6 +999,13 @@ int dbgp_reset_prep(void) } EXPORT_SYMBOL_GPL(dbgp_reset_prep); +int dbgp_external_startup(struct usb_hcd *hcd) +{ + return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup(); +} +EXPORT_SYMBOL_GPL(dbgp_external_startup); +#endif /* USB */ + #ifdef CONFIG_KGDB static char kgdbdbgp_buf[DBGP_MAX_PACKET]; |