diff options
Diffstat (limited to 'drivers/usb/core/hcd.c')
| -rw-r--r-- | drivers/usb/core/hcd.c | 2836 |
1 files changed, 1909 insertions, 927 deletions
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 6c7ca5b08cd..bec31e2efb8 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -6,7 +6,7 @@ * (C) Copyright Deti Fliegl 1999 * (C) Copyright Randy Dunlap 2000 * (C) Copyright David Brownell 2000-2002 - * + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -22,12 +22,7 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/config.h> - -#ifdef CONFIG_USB_DEBUG -#define DEBUG -#endif - +#include <linux/bcd.h> #include <linux/module.h> #include <linux/version.h> #include <linux/kernel.h> @@ -36,21 +31,24 @@ #include <linux/utsname.h> #include <linux/mm.h> #include <asm/io.h> -#include <asm/scatterlist.h> #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/mutex.h> #include <asm/irq.h> #include <asm/byteorder.h> +#include <asm/unaligned.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/pm_runtime.h> +#include <linux/types.h> #include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/usb/phy.h> #include "usb.h" -#include "hcd.h" -#include "hub.h" -// #define USB_BANDWIDTH_MESSAGES - /*-------------------------------------------------------------------------*/ /* @@ -86,30 +84,39 @@ /*-------------------------------------------------------------------------*/ +/* Keep track of which host controller drivers are loaded */ +unsigned long usb_hcds_loaded; +EXPORT_SYMBOL_GPL(usb_hcds_loaded); + /* host controllers we manage */ LIST_HEAD (usb_bus_list); EXPORT_SYMBOL_GPL (usb_bus_list); /* used when allocating bus numbers */ #define USB_MAXBUS 64 -struct usb_busmap { - unsigned long busmap [USB_MAXBUS / (8*sizeof (unsigned long))]; -}; -static struct usb_busmap busmap; +static DECLARE_BITMAP(busmap, USB_MAXBUS); /* used when updating list of hcds */ -DECLARE_MUTEX (usb_bus_list_lock); /* exported only for usbfs */ +DEFINE_MUTEX(usb_bus_list_lock); /* exported only for usbfs */ EXPORT_SYMBOL_GPL (usb_bus_list_lock); /* used for controlling access to virtual root hubs */ static DEFINE_SPINLOCK(hcd_root_hub_lock); -/* used when updating hcd data */ -static DEFINE_SPINLOCK(hcd_data_lock); +/* used when updating an endpoint's URB list */ +static DEFINE_SPINLOCK(hcd_urb_list_lock); + +/* used to protect against unlinking URBs after the device is gone */ +static DEFINE_SPINLOCK(hcd_urb_unlink_lock); /* wait queue for synchronous unlinks */ DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue); +static inline int is_root_hub(struct usb_device *udev) +{ + return (udev->parent == NULL); +} + /*-------------------------------------------------------------------------*/ /* @@ -117,23 +124,64 @@ DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue); */ /*-------------------------------------------------------------------------*/ +#define KERNEL_REL bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff)) +#define KERNEL_VER bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff)) + +/* usb 3.0 root hub device descriptor */ +static const u8 usb3_rh_dev_descriptor[18] = { + 0x12, /* __u8 bLength; */ + 0x01, /* __u8 bDescriptorType; Device */ + 0x00, 0x03, /* __le16 bcdUSB; v3.0 */ + + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */ + 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */ + + 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ + 0x03, 0x00, /* __le16 idProduct; device 0x0003 */ + KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ + + 0x03, /* __u8 iManufacturer; */ + 0x02, /* __u8 iProduct; */ + 0x01, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; -#define KERNEL_REL ((LINUX_VERSION_CODE >> 16) & 0x0ff) -#define KERNEL_VER ((LINUX_VERSION_CODE >> 8) & 0x0ff) +/* usb 2.5 (wireless USB 1.0) root hub device descriptor */ +static const u8 usb25_rh_dev_descriptor[18] = { + 0x12, /* __u8 bLength; */ + 0x01, /* __u8 bDescriptorType; Device */ + 0x50, 0x02, /* __le16 bcdUSB; v2.5 */ + + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */ + 0xFF, /* __u8 bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */ + + 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ + 0x02, 0x00, /* __le16 idProduct; device 0x0002 */ + KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ + + 0x03, /* __u8 iManufacturer; */ + 0x02, /* __u8 iProduct; */ + 0x01, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; /* usb 2.0 root hub device descriptor */ -static const u8 usb2_rh_dev_descriptor [18] = { +static const u8 usb2_rh_dev_descriptor[18] = { 0x12, /* __u8 bLength; */ 0x01, /* __u8 bDescriptorType; Device */ 0x00, 0x02, /* __le16 bcdUSB; v2.0 */ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ 0x00, /* __u8 bDeviceSubClass; */ - 0x01, /* __u8 bDeviceProtocol; [ usb 2.0 single TT ]*/ + 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */ - 0x00, 0x00, /* __le16 idVendor; */ - 0x00, 0x00, /* __le16 idProduct; */ + 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ + 0x02, 0x00, /* __le16 idProduct; device 0x0002 */ KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ 0x03, /* __u8 iManufacturer; */ @@ -145,7 +193,7 @@ static const u8 usb2_rh_dev_descriptor [18] = { /* no usb 2.0 root hub "device qualifier" descriptor: one speed only */ /* usb 1.1 root hub device descriptor */ -static const u8 usb11_rh_dev_descriptor [18] = { +static const u8 usb11_rh_dev_descriptor[18] = { 0x12, /* __u8 bLength; */ 0x01, /* __u8 bDescriptorType; Device */ 0x10, 0x01, /* __le16 bcdUSB; v1.1 */ @@ -155,8 +203,8 @@ static const u8 usb11_rh_dev_descriptor [18] = { 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */ - 0x00, 0x00, /* __le16 idVendor; */ - 0x00, 0x00, /* __le16 idProduct; */ + 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ + 0x01, 0x00, /* __le16 idProduct; device 0x0001 */ KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ 0x03, /* __u8 iManufacturer; */ @@ -170,7 +218,7 @@ static const u8 usb11_rh_dev_descriptor [18] = { /* Configuration descriptors for our root hubs */ -static const u8 fs_rh_config_descriptor [] = { +static const u8 fs_rh_config_descriptor[] = { /* one configuration */ 0x09, /* __u8 bLength; */ @@ -179,13 +227,13 @@ static const u8 fs_rh_config_descriptor [] = { 0x01, /* __u8 bNumInterfaces; (1) */ 0x01, /* __u8 bConfigurationValue; */ 0x00, /* __u8 iConfiguration; */ - 0xc0, /* __u8 bmAttributes; + 0xc0, /* __u8 bmAttributes; Bit 7: must be set, 6: Self-powered, 5: Remote wakeup, 4..0: resvd */ 0x00, /* __u8 MaxPower; */ - + /* USB 1.1: * USB 2.0, single TT organization (mandatory): * one interface, protocol 0 @@ -207,17 +255,17 @@ static const u8 fs_rh_config_descriptor [] = { 0x00, /* __u8 if_bInterfaceSubClass; */ 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */ 0x00, /* __u8 if_iInterface; */ - + /* one endpoint (status change endpoint) */ 0x07, /* __u8 ep_bLength; */ 0x05, /* __u8 ep_bDescriptorType; Endpoint */ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */ 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */ }; -static const u8 hs_rh_config_descriptor [] = { +static const u8 hs_rh_config_descriptor[] = { /* one configuration */ 0x09, /* __u8 bLength; */ @@ -226,13 +274,13 @@ static const u8 hs_rh_config_descriptor [] = { 0x01, /* __u8 bNumInterfaces; (1) */ 0x01, /* __u8 bConfigurationValue; */ 0x00, /* __u8 iConfiguration; */ - 0xc0, /* __u8 bmAttributes; + 0xc0, /* __u8 bmAttributes; Bit 7: must be set, 6: Self-powered, 5: Remote wakeup, 4..0: resvd */ 0x00, /* __u8 MaxPower; */ - + /* USB 1.1: * USB 2.0, single TT organization (mandatory): * one interface, protocol 0 @@ -254,92 +302,160 @@ static const u8 hs_rh_config_descriptor [] = { 0x00, /* __u8 if_bInterfaceSubClass; */ 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */ 0x00, /* __u8 if_iInterface; */ - + /* one endpoint (status change endpoint) */ 0x07, /* __u8 ep_bLength; */ 0x05, /* __u8 ep_bDescriptorType; Endpoint */ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) + * see hub.c:hub_configure() for details. */ + (USB_MAXCHILDREN + 1 + 7) / 8, 0x00, 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */ }; +static const u8 ss_rh_config_descriptor[] = { + /* one configuration */ + 0x09, /* __u8 bLength; */ + 0x02, /* __u8 bDescriptorType; Configuration */ + 0x1f, 0x00, /* __le16 wTotalLength; */ + 0x01, /* __u8 bNumInterfaces; (1) */ + 0x01, /* __u8 bConfigurationValue; */ + 0x00, /* __u8 iConfiguration; */ + 0xc0, /* __u8 bmAttributes; + Bit 7: must be set, + 6: Self-powered, + 5: Remote wakeup, + 4..0: resvd */ + 0x00, /* __u8 MaxPower; */ + + /* one interface */ + 0x09, /* __u8 if_bLength; */ + 0x04, /* __u8 if_bDescriptorType; Interface */ + 0x00, /* __u8 if_bInterfaceNumber; */ + 0x00, /* __u8 if_bAlternateSetting; */ + 0x01, /* __u8 if_bNumEndpoints; */ + 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ + 0x00, /* __u8 if_bInterfaceSubClass; */ + 0x00, /* __u8 if_bInterfaceProtocol; */ + 0x00, /* __u8 if_iInterface; */ + + /* one endpoint (status change endpoint) */ + 0x07, /* __u8 ep_bLength; */ + 0x05, /* __u8 ep_bDescriptorType; Endpoint */ + 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) + * see hub.c:hub_configure() for details. */ + (USB_MAXCHILDREN + 1 + 7) / 8, 0x00, + 0x0c, /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */ + + /* one SuperSpeed endpoint companion descriptor */ + 0x06, /* __u8 ss_bLength */ + 0x30, /* __u8 ss_bDescriptorType; SuperSpeed EP Companion */ + 0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */ + 0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */ + 0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */ +}; + +/* authorized_default behaviour: + * -1 is authorized for all devices except wireless (old behaviour) + * 0 is unauthorized for all devices + * 1 is authorized for all devices + */ +static int authorized_default = -1; +module_param(authorized_default, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(authorized_default, + "Default USB device authorization: 0 is not authorized, 1 is " + "authorized, -1 is authorized except for wireless USB (default, " + "old behaviour"); /*-------------------------------------------------------------------------*/ -/* - * helper routine for returning string descriptors in UTF-16LE - * input can actually be ISO-8859-1; ASCII is its 7-bit subset +/** + * ascii2desc() - Helper routine for producing UTF-16LE string descriptors + * @s: Null-terminated ASCII (actually ISO-8859-1) string + * @buf: Buffer for USB string descriptor (header + UTF-16LE) + * @len: Length (in bytes; may be odd) of descriptor buffer. + * + * Return: The number of bytes filled in: 2 + 2*strlen(s) or @len, + * whichever is less. + * + * Note: + * USB String descriptors can contain at most 126 characters; input + * strings longer than that are truncated. */ -static int ascii2utf (char *s, u8 *utf, int utfmax) +static unsigned +ascii2desc(char const *s, u8 *buf, unsigned len) { - int retval; + unsigned n, t = 2 + 2*strlen(s); - for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) { - *utf++ = *s++; - *utf++ = 0; - } - if (utfmax > 0) { - *utf = *s; - ++retval; + if (t > 254) + t = 254; /* Longest possible UTF string descriptor */ + if (len > t) + len = t; + + t += USB_DT_STRING << 8; /* Now t is first 16 bits to store */ + + n = len; + while (n--) { + *buf++ = t; + if (!n--) + break; + *buf++ = t >> 8; + t = (unsigned char)*s++; } - return retval; + return len; } -/* - * rh_string - provides manufacturer, product and serial strings for root hub - * @id: the string ID number (1: serial number, 2: product, 3: vendor) +/** + * rh_string() - provides string descriptors for root hub + * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor) * @hcd: the host controller for this root hub - * @type: string describing our driver - * @data: return packet in UTF-16 LE - * @len: length of the return packet + * @data: buffer for output packet + * @len: length of the provided buffer * * Produces either a manufacturer, product or serial number string for the * virtual root hub device. + * + * Return: The number of bytes filled in: the length of the descriptor or + * of the provided buffer, whichever is less. */ -static int rh_string ( - int id, - struct usb_hcd *hcd, - u8 *data, - int len -) { - char buf [100]; - - // language ids - if (id == 0) { - buf[0] = 4; buf[1] = 3; /* 4 bytes string data */ - buf[2] = 0x09; buf[3] = 0x04; /* MSFT-speak for "en-us" */ - len = min (len, 4); - memcpy (data, buf, len); - return len; - - // serial number - } else if (id == 1) { - strlcpy (buf, hcd->self.bus_name, sizeof buf); - - // product description - } else if (id == 2) { - strlcpy (buf, hcd->product_desc, sizeof buf); - - // id 3 == vendor description - } else if (id == 3) { - snprintf (buf, sizeof buf, "%s %s %s", system_utsname.sysname, - system_utsname.release, hcd->driver->description); - - // unsupported IDs --> "protocol stall" - } else - return -EPIPE; +static unsigned +rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len) +{ + char buf[100]; + char const *s; + static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04}; - switch (len) { /* All cases fall through */ - default: - len = 2 + ascii2utf (buf, data + 2, len - 2); - case 2: - data [1] = 3; /* type == string */ - case 1: - data [0] = 2 * (strlen (buf) + 1); + /* language ids */ + switch (id) { case 0: - ; /* Compiler wants a statement here */ + /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */ + /* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */ + if (len > 4) + len = 4; + memcpy(data, langids, len); + return len; + case 1: + /* Serial number */ + s = hcd->self.bus_name; + break; + case 2: + /* Product name */ + s = hcd->product_desc; + break; + case 3: + /* Manufacturer */ + snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname, + init_utsname()->release, hcd->driver->description); + s = buf; + break; + default: + /* Can't happen; caller guarantees it */ + return 0; } - return len; + + return ascii2desc(s, data, len); } @@ -347,15 +463,24 @@ static int rh_string ( static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) { struct usb_ctrlrequest *cmd; - u16 typeReq, wValue, wIndex, wLength; + u16 typeReq, wValue, wIndex, wLength; u8 *ubuf = urb->transfer_buffer; - u8 tbuf [sizeof (struct usb_hub_descriptor)]; - const u8 *bufp = tbuf; - int len = 0; - int patch_wakeup = 0; - unsigned long flags; - int status = 0; - int n; + unsigned len = 0; + int status; + u8 patch_wakeup = 0; + u8 patch_protocol = 0; + u16 tbuf_size; + u8 *tbuf = NULL; + const u8 *bufp; + + might_sleep(); + + spin_lock_irq(&hcd_root_hub_lock); + status = usb_hcd_link_urb_to_ep(hcd, urb); + spin_unlock_irq(&hcd_root_hub_lock); + if (status) + return status; + urb->hcpriv = hcd; /* Indicate it's queued */ cmd = (struct usb_ctrlrequest *) urb->setup_packet; typeReq = (cmd->bRequestType << 8) | cmd->bRequest; @@ -366,31 +491,61 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) if (wLength > urb->transfer_buffer_length) goto error; + /* + * tbuf should be at least as big as the + * USB hub descriptor. + */ + tbuf_size = max_t(u16, sizeof(struct usb_hub_descriptor), wLength); + tbuf = kzalloc(tbuf_size, GFP_KERNEL); + if (!tbuf) + return -ENOMEM; + + bufp = tbuf; + + urb->actual_length = 0; switch (typeReq) { /* DEVICE REQUESTS */ + /* The root hub's remote wakeup enable bit is implemented using + * driver model wakeup flags. If this system supports wakeup + * through USB, userspace may change the default "allow wakeup" + * policy through sysfs or these calls. + * + * Most root hubs support wakeup from downstream devices, for + * runtime power management (disabling USB clocks and reducing + * VBUS power usage). However, not all of them do so; silicon, + * board, and BIOS bugs here are not uncommon, so these can't + * be treated quite like external hubs. + * + * Likewise, not all root hubs will pass wakeup events upstream, + * to wake up the whole system. So don't assume root hub and + * controller capabilities are identical. + */ + case DeviceRequest | USB_REQ_GET_STATUS: - tbuf [0] = (hcd->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP) + tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev) + << USB_DEVICE_REMOTE_WAKEUP) | (1 << USB_DEVICE_SELF_POWERED); - tbuf [1] = 0; + tbuf[1] = 0; len = 2; break; case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: if (wValue == USB_DEVICE_REMOTE_WAKEUP) - hcd->remote_wakeup = 0; + device_set_wakeup_enable(&hcd->self.root_hub->dev, 0); else goto error; break; case DeviceOutRequest | USB_REQ_SET_FEATURE: - if (hcd->can_wakeup && wValue == USB_DEVICE_REMOTE_WAKEUP) - hcd->remote_wakeup = 1; + if (device_can_wakeup(&hcd->self.root_hub->dev) + && wValue == USB_DEVICE_REMOTE_WAKEUP) + device_set_wakeup_enable(&hcd->self.root_hub->dev, 1); else goto error; break; case DeviceRequest | USB_REQ_GET_CONFIGURATION: - tbuf [0] = 1; + tbuf[0] = 1; len = 1; /* FALLTHROUGH */ case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: @@ -398,43 +553,68 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) case DeviceRequest | USB_REQ_GET_DESCRIPTOR: switch (wValue & 0xff00) { case USB_DT_DEVICE << 8: - if (hcd->driver->flags & HCD_USB2) + switch (hcd->speed) { + case HCD_USB3: + bufp = usb3_rh_dev_descriptor; + break; + case HCD_USB25: + bufp = usb25_rh_dev_descriptor; + break; + case HCD_USB2: bufp = usb2_rh_dev_descriptor; - else if (hcd->driver->flags & HCD_USB11) + break; + case HCD_USB11: bufp = usb11_rh_dev_descriptor; - else + break; + default: goto error; + } len = 18; + if (hcd->has_tt) + patch_protocol = 1; break; case USB_DT_CONFIG << 8: - if (hcd->driver->flags & HCD_USB2) { + switch (hcd->speed) { + case HCD_USB3: + bufp = ss_rh_config_descriptor; + len = sizeof ss_rh_config_descriptor; + break; + case HCD_USB25: + case HCD_USB2: bufp = hs_rh_config_descriptor; len = sizeof hs_rh_config_descriptor; - } else { + break; + case HCD_USB11: bufp = fs_rh_config_descriptor; len = sizeof fs_rh_config_descriptor; + break; + default: + goto error; } - if (hcd->can_wakeup) + if (device_can_wakeup(&hcd->self.root_hub->dev)) patch_wakeup = 1; break; case USB_DT_STRING << 8: - n = rh_string (wValue & 0xff, hcd, ubuf, wLength); - if (n < 0) + if ((wValue & 0xff) < 4) + urb->actual_length = rh_string(wValue & 0xff, + hcd, ubuf, wLength); + else /* unsupported IDs --> "protocol stall" */ goto error; - urb->actual_length = n; break; + case USB_DT_BOS << 8: + goto nongeneric; default: goto error; } break; case DeviceRequest | USB_REQ_GET_INTERFACE: - tbuf [0] = 0; + tbuf[0] = 0; len = 1; /* FALLTHROUGH */ case DeviceOutRequest | USB_REQ_SET_INTERFACE: break; case DeviceOutRequest | USB_REQ_SET_ADDRESS: - // wValue == urb->dev->devaddr + /* wValue == urb->dev->devaddr */ dev_dbg (hcd->self.controller, "root hub device address %d\n", wValue); break; @@ -444,9 +624,9 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) /* ENDPOINT REQUESTS */ case EndpointRequest | USB_REQ_GET_STATUS: - // ENDPOINT_HALT flag - tbuf [0] = 0; - tbuf [1] = 0; + /* ENDPOINT_HALT flag */ + tbuf[0] = 0; + tbuf[1] = 0; len = 2; /* FALLTHROUGH */ case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: @@ -457,6 +637,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) /* CLASS REQUESTS (and errors) */ default: +nongeneric: /* non-generic request */ switch (typeReq) { case GetHubStatus: @@ -466,17 +647,24 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) case GetHubDescriptor: len = sizeof (struct usb_hub_descriptor); break; + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + /* len is returned by hub_control */ + break; } status = hcd->driver->hub_control (hcd, typeReq, wValue, wIndex, tbuf, wLength); + + if (typeReq == GetHubDescriptor) + usb_hub_adjust_deviceremovable(hcd->self.root_hub, + (struct usb_hub_descriptor *)tbuf); break; error: /* "protocol stall" on error */ status = -EPIPE; } - if (status) { + if (status < 0) { len = 0; if (status != -EPIPE) { dev_dbg (hcd->self.controller, @@ -485,12 +673,16 @@ error: typeReq, wValue, wIndex, wLength, status); } + } else if (status > 0) { + /* hub_control may return the length of data copied. */ + len = status; + status = 0; } if (len) { if (urb->transfer_buffer_length < len) len = urb->transfer_buffer_length; urb->actual_length = len; - // always USB_DIR_IN, toward host + /* always USB_DIR_IN, toward host */ memcpy (ubuf, bufp, len); /* report whether RH hardware supports remote wakeup */ @@ -499,16 +691,22 @@ error: bmAttributes)) ((struct usb_config_descriptor *)ubuf)->bmAttributes |= USB_CONFIG_ATT_WAKEUP; + + /* report whether RH hardware has an integrated TT */ + if (patch_protocol && + len > offsetof(struct usb_device_descriptor, + bDeviceProtocol)) + ((struct usb_device_descriptor *) ubuf)-> + bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT; } + kfree(tbuf); + /* any errors get returned through the urb completion */ - local_irq_save (flags); - spin_lock (&urb->lock); - if (urb->status == -EINPROGRESS) - urb->status = status; - spin_unlock (&urb->lock); - usb_hcd_giveback_urb (hcd, urb, NULL); - local_irq_restore (flags); + spin_lock_irq(&hcd_root_hub_lock); + usb_hcd_unlink_urb_from_ep(hcd, urb); + usb_hcd_giveback_urb(hcd, urb, status); + spin_unlock_irq(&hcd_root_hub_lock); return 0; } @@ -527,8 +725,10 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) struct urb *urb; int length; unsigned long flags; - char buffer[4]; /* Any root hubs with > 31 ports? */ + char buffer[6]; /* Any root hubs with > 31 ports? */ + if (unlikely(!hcd->rh_pollable)) + return; if (!hcd->uses_new_polling && !hcd->status_urb) return; @@ -536,38 +736,30 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) if (length > 0) { /* try to complete the status urb */ - local_irq_save (flags); - spin_lock(&hcd_root_hub_lock); + spin_lock_irqsave(&hcd_root_hub_lock, flags); urb = hcd->status_urb; if (urb) { - spin_lock(&urb->lock); - if (urb->status == -EINPROGRESS) { - hcd->poll_pending = 0; - hcd->status_urb = NULL; - urb->status = 0; - urb->hcpriv = NULL; - urb->actual_length = length; - memcpy(urb->transfer_buffer, buffer, length); - } else /* urb has been unlinked */ - length = 0; - spin_unlock(&urb->lock); - } else - length = 0; - spin_unlock(&hcd_root_hub_lock); + clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags); + hcd->status_urb = NULL; + urb->actual_length = length; + memcpy(urb->transfer_buffer, buffer, length); - /* local irqs are always blocked in completions */ - if (length > 0) - usb_hcd_giveback_urb (hcd, urb, NULL); - else - hcd->poll_pending = 1; - local_irq_restore (flags); + usb_hcd_unlink_urb_from_ep(hcd, urb); + usb_hcd_giveback_urb(hcd, urb, 0); + } else { + length = 0; + set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags); + } + spin_unlock_irqrestore(&hcd_root_hub_lock, flags); } /* The USB 2.0 spec says 256 ms. This is close enough and won't - * exceed that limit if HZ is 100. */ - if (hcd->uses_new_polling ? hcd->poll_rh : + * exceed that limit if HZ is 100. The math is more clunky than + * maybe expected, this is to make sure that all timers for USB devices + * fire at the same time to give the CPU a break in between */ + if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) : (length == 0 && hcd->status_urb != NULL)) - mod_timer (&hcd->rh_timer, jiffies + msecs_to_jiffies(250)); + mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4)); } EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status); @@ -583,125 +775,130 @@ static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb) { int retval; unsigned long flags; - int len = 1 + (urb->dev->maxchild / 8); + unsigned len = 1 + (urb->dev->maxchild / 8); spin_lock_irqsave (&hcd_root_hub_lock, flags); - if (urb->status != -EINPROGRESS) /* already unlinked */ - retval = urb->status; - else if (hcd->status_urb || urb->transfer_buffer_length < len) { + if (hcd->status_urb || urb->transfer_buffer_length < len) { dev_dbg (hcd->self.controller, "not queuing rh status urb\n"); retval = -EINVAL; - } else { - hcd->status_urb = urb; - urb->hcpriv = hcd; /* indicate it's queued */ + goto done; + } - if (!hcd->uses_new_polling) - mod_timer (&hcd->rh_timer, jiffies + - msecs_to_jiffies(250)); + retval = usb_hcd_link_urb_to_ep(hcd, urb); + if (retval) + goto done; - /* If a status change has already occurred, report it ASAP */ - else if (hcd->poll_pending) - mod_timer (&hcd->rh_timer, jiffies); - retval = 0; - } + hcd->status_urb = urb; + urb->hcpriv = hcd; /* indicate it's queued */ + if (!hcd->uses_new_polling) + mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4)); + + /* If a status change has already occurred, report it ASAP */ + else if (HCD_POLL_PENDING(hcd)) + mod_timer(&hcd->rh_timer, jiffies); + retval = 0; + done: spin_unlock_irqrestore (&hcd_root_hub_lock, flags); return retval; } static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb) { - if (usb_pipeint (urb->pipe)) + if (usb_endpoint_xfer_int(&urb->ep->desc)) return rh_queue_status (hcd, urb); - if (usb_pipecontrol (urb->pipe)) + if (usb_endpoint_xfer_control(&urb->ep->desc)) return rh_call_control (hcd, urb); return -EINVAL; } /*-------------------------------------------------------------------------*/ -/* Asynchronous unlinks of root-hub control URBs are legal, but they - * don't do anything. Status URB unlinks must be made in process context - * with interrupts enabled. +/* Unlinks of root-hub control URBs are legal, but they don't do anything + * since these URBs always execute synchronously. */ -static int usb_rh_urb_dequeue (struct usb_hcd *hcd, struct urb *urb) +static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { - if (usb_pipeendpoint(urb->pipe) == 0) { /* Control URB */ - if (in_interrupt()) - return 0; /* nothing to do */ - - spin_lock_irq(&urb->lock); /* from usb_kill_urb */ - ++urb->reject; - spin_unlock_irq(&urb->lock); + unsigned long flags; + int rc; - wait_event(usb_kill_urb_queue, - atomic_read(&urb->use_count) == 0); + spin_lock_irqsave(&hcd_root_hub_lock, flags); + rc = usb_hcd_check_unlink_urb(hcd, urb, status); + if (rc) + goto done; - spin_lock_irq(&urb->lock); - --urb->reject; - spin_unlock_irq(&urb->lock); + if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */ + ; /* Do nothing */ } else { /* Status URB */ if (!hcd->uses_new_polling) - del_timer_sync (&hcd->rh_timer); - local_irq_disable (); - spin_lock (&hcd_root_hub_lock); + del_timer (&hcd->rh_timer); if (urb == hcd->status_urb) { hcd->status_urb = NULL; - urb->hcpriv = NULL; - } else - urb = NULL; /* wasn't fully queued */ - spin_unlock (&hcd_root_hub_lock); - if (urb) - usb_hcd_giveback_urb (hcd, urb, NULL); - local_irq_enable (); + usb_hcd_unlink_urb_from_ep(hcd, urb); + usb_hcd_giveback_urb(hcd, urb, status); + } } - - return 0; + done: + spin_unlock_irqrestore(&hcd_root_hub_lock, flags); + return rc; } -/*-------------------------------------------------------------------------*/ -/* exported only within usbcore */ -struct usb_bus *usb_bus_get(struct usb_bus *bus) -{ - if (bus) - kref_get(&bus->kref); - return bus; -} -static void usb_host_release(struct kref *kref) +/* + * Show & store the current value of authorized_default + */ +static ssize_t authorized_default_show(struct device *dev, + struct device_attribute *attr, char *buf) { - struct usb_bus *bus = container_of(kref, struct usb_bus, kref); + struct usb_device *rh_usb_dev = to_usb_device(dev); + struct usb_bus *usb_bus = rh_usb_dev->bus; + struct usb_hcd *usb_hcd; - if (bus->release) - bus->release(bus); + if (usb_bus == NULL) /* FIXME: not sure if this case is possible */ + return -ENODEV; + usb_hcd = bus_to_hcd(usb_bus); + return snprintf(buf, PAGE_SIZE, "%u\n", usb_hcd->authorized_default); } -/* exported only within usbcore */ -void usb_bus_put(struct usb_bus *bus) +static ssize_t authorized_default_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) { - if (bus) - kref_put(&bus->kref, usb_host_release); + ssize_t result; + unsigned val; + struct usb_device *rh_usb_dev = to_usb_device(dev); + struct usb_bus *usb_bus = rh_usb_dev->bus; + struct usb_hcd *usb_hcd; + + if (usb_bus == NULL) /* FIXME: not sure if this case is possible */ + return -ENODEV; + usb_hcd = bus_to_hcd(usb_bus); + result = sscanf(buf, "%u\n", &val); + if (result == 1) { + usb_hcd->authorized_default = val ? 1 : 0; + result = size; + } else { + result = -EINVAL; + } + return result; } +static DEVICE_ATTR_RW(authorized_default); -/*-------------------------------------------------------------------------*/ +/* Group all the USB bus attributes */ +static struct attribute *usb_bus_attrs[] = { + &dev_attr_authorized_default.attr, + NULL, +}; -static struct class *usb_host_class; +static struct attribute_group usb_bus_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = usb_bus_attrs, +}; -int usb_host_init(void) -{ - int retval = 0; - usb_host_class = class_create(THIS_MODULE, "usb_host"); - if (IS_ERR(usb_host_class)) - retval = PTR_ERR(usb_host_class); - return retval; -} -void usb_host_cleanup(void) -{ - class_destroy(usb_host_class); -} +/*-------------------------------------------------------------------------*/ /** * usb_bus_init - shared initialization code @@ -717,39 +914,13 @@ static void usb_bus_init (struct usb_bus *bus) bus->devnum_next = 1; bus->root_hub = NULL; - bus->hcpriv = NULL; bus->busnum = -1; bus->bandwidth_allocated = 0; bus->bandwidth_int_reqs = 0; bus->bandwidth_isoc_reqs = 0; + mutex_init(&bus->usb_address0_mutex); INIT_LIST_HEAD (&bus->bus_list); - - kref_init(&bus->kref); -} - -/** - * usb_alloc_bus - creates a new USB host controller structure - * @op: pointer to a struct usb_operations that this bus structure should use - * Context: !in_interrupt() - * - * Creates a USB host controller bus structure with the specified - * usb_operations and initializes all the necessary internal objects. - * - * If no memory is available, NULL is returned. - * - * The caller should call usb_put_bus() when it is finished with the structure. - */ -struct usb_bus *usb_alloc_bus (struct usb_operations *op) -{ - struct usb_bus *bus; - - bus = kzalloc (sizeof *bus, GFP_KERNEL); - if (!bus) - return NULL; - usb_bus_init (bus); - bus->op = op; - return bus; } /*-------------------------------------------------------------------------*/ @@ -761,40 +932,36 @@ struct usb_bus *usb_alloc_bus (struct usb_operations *op) * * Assigns a bus number, and links the controller into usbcore data * structures so that it can be seen by scanning the bus list. + * + * Return: 0 if successful. A negative error code otherwise. */ static int usb_register_bus(struct usb_bus *bus) { + int result = -E2BIG; int busnum; - down (&usb_bus_list_lock); - busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1); - if (busnum < USB_MAXBUS) { - set_bit (busnum, busmap.busmap); - bus->busnum = busnum; - } else { + mutex_lock(&usb_bus_list_lock); + busnum = find_next_zero_bit(busmap, USB_MAXBUS, 1); + if (busnum >= USB_MAXBUS) { printk (KERN_ERR "%s: too many buses\n", usbcore_name); - up(&usb_bus_list_lock); - return -E2BIG; - } - - bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0), - bus->controller, "usb_host%d", busnum); - if (IS_ERR(bus->class_dev)) { - clear_bit(busnum, busmap.busmap); - up(&usb_bus_list_lock); - return PTR_ERR(bus->class_dev); + goto error_find_busnum; } - - class_set_devdata(bus->class_dev, bus); + set_bit(busnum, busmap); + bus->busnum = busnum; /* Add it to the local list of buses */ list_add (&bus->bus_list, &usb_bus_list); - up (&usb_bus_list_lock); + mutex_unlock(&usb_bus_list_lock); usb_notify_add_bus(bus); - dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum); + dev_info (bus->controller, "new USB bus registered, assigned bus " + "number %d\n", bus->busnum); return 0; + +error_find_busnum: + mutex_unlock(&usb_bus_list_lock); + return result; } /** @@ -814,31 +981,30 @@ static void usb_deregister_bus (struct usb_bus *bus) * controller code, as well as having it call this when cleaning * itself up */ - down (&usb_bus_list_lock); + mutex_lock(&usb_bus_list_lock); list_del (&bus->bus_list); - up (&usb_bus_list_lock); + mutex_unlock(&usb_bus_list_lock); usb_notify_remove_bus(bus); - clear_bit (bus->busnum, busmap.busmap); - - class_device_unregister(bus->class_dev); + clear_bit(bus->busnum, busmap); } /** * register_root_hub - called by usb_add_hcd() to register a root hub - * @usb_dev: the usb root hub device to be registered. * @hcd: host controller for this root hub * * This function registers the root hub with the USB subsystem. It sets up - * the device properly in the device tree and stores the root_hub pointer - * in the bus structure, then calls usb_new_device() to register the usb - * device. It also assigns the root hub's USB address (always 1). + * the device properly in the device tree and then calls usb_new_device() + * to register the usb device. It also assigns the root hub's USB address + * (always 1). + * + * Return: 0 if successful. A negative error code otherwise. */ -static int register_root_hub (struct usb_device *usb_dev, - struct usb_hcd *hcd) +static int register_root_hub(struct usb_hcd *hcd) { struct device *parent_dev = hcd->self.controller; + struct usb_device *usb_dev = hcd->self.root_hub; const int devnum = 1; int retval; @@ -849,52 +1015,87 @@ static int register_root_hub (struct usb_device *usb_dev, set_bit (devnum, usb_dev->bus->devmap.devicemap); usb_set_device_state(usb_dev, USB_STATE_ADDRESS); - down (&usb_bus_list_lock); - usb_dev->bus->root_hub = usb_dev; + mutex_lock(&usb_bus_list_lock); - usb_dev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64); + usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64); retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE); if (retval != sizeof usb_dev->descriptor) { - usb_dev->bus->root_hub = NULL; - up (&usb_bus_list_lock); + mutex_unlock(&usb_bus_list_lock); dev_dbg (parent_dev, "can't read %s device descriptor %d\n", - usb_dev->dev.bus_id, retval); + dev_name(&usb_dev->dev), retval); return (retval < 0) ? retval : -EMSGSIZE; } + if (usb_dev->speed == USB_SPEED_SUPER) { + retval = usb_get_bos_descriptor(usb_dev); + if (retval < 0) { + mutex_unlock(&usb_bus_list_lock); + dev_dbg(parent_dev, "can't read %s bos descriptor %d\n", + dev_name(&usb_dev->dev), retval); + return retval; + } + } - usb_lock_device (usb_dev); retval = usb_new_device (usb_dev); - usb_unlock_device (usb_dev); if (retval) { - usb_dev->bus->root_hub = NULL; dev_err (parent_dev, "can't register root hub for %s, %d\n", - usb_dev->dev.bus_id, retval); - } - up (&usb_bus_list_lock); - - if (retval == 0) { + dev_name(&usb_dev->dev), retval); + } else { spin_lock_irq (&hcd_root_hub_lock); hcd->rh_registered = 1; spin_unlock_irq (&hcd_root_hub_lock); /* Did the HC die before the root hub was registered? */ - if (hcd->state == HC_STATE_HALT) + if (HCD_DEAD(hcd)) usb_hc_died (hcd); /* This time clean up */ } + mutex_unlock(&usb_bus_list_lock); return retval; } -void usb_enable_root_hub_irq (struct usb_bus *bus) +/* + * usb_hcd_start_port_resume - a root-hub port is sending a resume signal + * @bus: the bus which the root hub belongs to + * @portnum: the port which is being resumed + * + * HCDs should call this function when they know that a resume signal is + * being sent to a root-hub port. The root hub will be prevented from + * going into autosuspend until usb_hcd_end_port_resume() is called. + * + * The bus's private lock must be held by the caller. + */ +void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum) { - struct usb_hcd *hcd; + unsigned bit = 1 << portnum; - hcd = container_of (bus, struct usb_hcd, self); - if (hcd->driver->hub_irq_enable && !hcd->poll_rh && - hcd->state != HC_STATE_HALT) - hcd->driver->hub_irq_enable (hcd); + if (!(bus->resuming_ports & bit)) { + bus->resuming_ports |= bit; + pm_runtime_get_noresume(&bus->root_hub->dev); + } } +EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume); +/* + * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal + * @bus: the bus which the root hub belongs to + * @portnum: the port which is being resumed + * + * HCDs should call this function when they know that a resume signal has + * stopped being sent to a root-hub port. The root hub will be allowed to + * autosuspend again. + * + * The bus's private lock must be held by the caller. + */ +void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum) +{ + unsigned bit = 1 << portnum; + + if (bus->resuming_ports & bit) { + bus->resuming_ports &= ~bit; + pm_runtime_put_noidle(&bus->root_hub->dev); + } +} +EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume); /*-------------------------------------------------------------------------*/ @@ -905,7 +1106,9 @@ void usb_enable_root_hub_irq (struct usb_bus *bus) * @isoc: true for isochronous transactions, false for interrupt ones * @bytecount: how many bytes in the transaction. * - * Returns approximate bus time in nanoseconds for a periodic transaction. + * Return: Approximate bus time in nanoseconds for a periodic transaction. + * + * Note: * See USB 2.0 spec section 5.11.3; only periodic transfers need to be * scheduled in software, this function is only used for such scheduling. */ @@ -917,21 +1120,21 @@ long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount) case USB_SPEED_LOW: /* INTR only */ if (is_input) { tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L; - return (64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp); + return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp; } else { tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L; - return (64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp); + return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp; } case USB_SPEED_FULL: /* ISOC or INTR */ if (isoc) { tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L; - return (((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp); + return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp; } else { tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L; - return (9107L + BW_HOST_DELAY + tmp); + return 9107L + BW_HOST_DELAY + tmp; } case USB_SPEED_HIGH: /* ISOC or INTR */ - // FIXME adjust for input vs output + /* FIXME adjust for input vs output */ if (isoc) tmp = HS_NSECS_ISO (bytecount); else @@ -942,313 +1145,470 @@ long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount) return -1; } } -EXPORT_SYMBOL (usb_calc_bus_time); +EXPORT_SYMBOL_GPL(usb_calc_bus_time); + + +/*-------------------------------------------------------------------------*/ /* - * usb_check_bandwidth(): + * Generic HC operations. + */ + +/*-------------------------------------------------------------------------*/ + +/** + * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue + * @hcd: host controller to which @urb was submitted + * @urb: URB being submitted * - * old_alloc is from host_controller->bandwidth_allocated in microseconds; - * bustime is from calc_bus_time(), but converted to microseconds. + * Host controller drivers should call this routine in their enqueue() + * method. The HCD's private spinlock must be held and interrupts must + * be disabled. The actions carried out here are required for URB + * submission, as well as for endpoint shutdown and for usb_kill_urb. * - * returns <bustime in us> if successful, - * or -ENOSPC if bandwidth request fails. + * Return: 0 for no error, otherwise a negative error code (in which case + * the enqueue() method must fail). If no error occurs but enqueue() fails + * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing + * the private spinlock and returning. + */ +int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb) +{ + int rc = 0; + + spin_lock(&hcd_urb_list_lock); + + /* Check that the URB isn't being killed */ + if (unlikely(atomic_read(&urb->reject))) { + rc = -EPERM; + goto done; + } + + if (unlikely(!urb->ep->enabled)) { + rc = -ENOENT; + goto done; + } + + if (unlikely(!urb->dev->can_submit)) { + rc = -EHOSTUNREACH; + goto done; + } + + /* + * Check the host controller's state and add the URB to the + * endpoint's queue. + */ + if (HCD_RH_RUNNING(hcd)) { + urb->unlinked = 0; + list_add_tail(&urb->urb_list, &urb->ep->urb_list); + } else { + rc = -ESHUTDOWN; + goto done; + } + done: + spin_unlock(&hcd_urb_list_lock); + return rc; +} +EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep); + +/** + * usb_hcd_check_unlink_urb - check whether an URB may be unlinked + * @hcd: host controller to which @urb was submitted + * @urb: URB being checked for unlinkability + * @status: error code to store in @urb if the unlink succeeds * - * FIXME: - * This initial implementation does not use Endpoint.bInterval - * in managing bandwidth allocation. - * It probably needs to be expanded to use Endpoint.bInterval. - * This can be done as a later enhancement (correction). + * Host controller drivers should call this routine in their dequeue() + * method. The HCD's private spinlock must be held and interrupts must + * be disabled. The actions carried out here are required for making + * sure than an unlink is valid. * - * This will also probably require some kind of - * frame allocation tracking...meaning, for example, - * that if multiple drivers request interrupts every 10 USB frames, - * they don't all have to be allocated at - * frame numbers N, N+10, N+20, etc. Some of them could be at - * N+11, N+21, N+31, etc., and others at - * N+12, N+22, N+32, etc. + * Return: 0 for no error, otherwise a negative error code (in which case + * the dequeue() method must fail). The possible error codes are: * - * Similarly for isochronous transfers... + * -EIDRM: @urb was not submitted or has already completed. + * The completion function may not have been called yet. * - * Individual HCDs can schedule more directly ... this logic - * is not correct for high speed transfers. + * -EBUSY: @urb has already been unlinked. */ -int usb_check_bandwidth (struct usb_device *dev, struct urb *urb) -{ - unsigned int pipe = urb->pipe; - long bustime; - int is_in = usb_pipein (pipe); - int is_iso = usb_pipeisoc (pipe); - int old_alloc = dev->bus->bandwidth_allocated; - int new_alloc; - - - bustime = NS_TO_US (usb_calc_bus_time (dev->speed, is_in, is_iso, - usb_maxpacket (dev, pipe, !is_in))); - if (is_iso) - bustime /= urb->number_of_packets; - - new_alloc = old_alloc + (int) bustime; - if (new_alloc > FRAME_TIME_MAX_USECS_ALLOC) { -#ifdef DEBUG - char *mode = -#ifdef CONFIG_USB_BANDWIDTH - ""; -#else - "would have "; -#endif - dev_dbg (&dev->dev, "usb_check_bandwidth %sFAILED: %d + %ld = %d usec\n", - mode, old_alloc, bustime, new_alloc); -#endif -#ifdef CONFIG_USB_BANDWIDTH - bustime = -ENOSPC; /* report error */ -#endif +int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, + int status) +{ + struct list_head *tmp; + + /* insist the urb is still queued */ + list_for_each(tmp, &urb->ep->urb_list) { + if (tmp == &urb->urb_list) + break; } + if (tmp != &urb->urb_list) + return -EIDRM; - return bustime; + /* Any status except -EINPROGRESS means something already started to + * unlink this URB from the hardware. So there's no more work to do. + */ + if (urb->unlinked) + return -EBUSY; + urb->unlinked = status; + return 0; } -EXPORT_SYMBOL (usb_check_bandwidth); - +EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb); /** - * usb_claim_bandwidth - records bandwidth for a periodic transfer - * @dev: source/target of request - * @urb: request (urb->dev == dev) - * @bustime: bandwidth consumed, in (average) microseconds per frame - * @isoc: true iff the request is isochronous - * - * Bus bandwidth reservations are recorded purely for diagnostic purposes. - * HCDs are expected not to overcommit periodic bandwidth, and to record such - * reservations whenever endpoints are added to the periodic schedule. - * - * FIXME averaging per-frame is suboptimal. Better to sum over the HCD's - * entire periodic schedule ... 32 frames for OHCI, 1024 for UHCI, settable - * for EHCI (256/512/1024 frames, default 1024) and have the bus expose how - * large its periodic schedule is. + * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue + * @hcd: host controller to which @urb was submitted + * @urb: URB being unlinked + * + * Host controller drivers should call this routine before calling + * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and + * interrupts must be disabled. The actions carried out here are required + * for URB completion. */ -void usb_claim_bandwidth (struct usb_device *dev, struct urb *urb, int bustime, int isoc) +void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb) { - dev->bus->bandwidth_allocated += bustime; - if (isoc) - dev->bus->bandwidth_isoc_reqs++; - else - dev->bus->bandwidth_int_reqs++; - urb->bandwidth = bustime; - -#ifdef USB_BANDWIDTH_MESSAGES - dev_dbg (&dev->dev, "bandwidth alloc increased by %d (%s) to %d for %d requesters\n", - bustime, - isoc ? "ISOC" : "INTR", - dev->bus->bandwidth_allocated, - dev->bus->bandwidth_int_reqs + dev->bus->bandwidth_isoc_reqs); -#endif + /* clear all state linking urb to this dev (and hcd) */ + spin_lock(&hcd_urb_list_lock); + list_del_init(&urb->urb_list); + spin_unlock(&hcd_urb_list_lock); } -EXPORT_SYMBOL (usb_claim_bandwidth); - +EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep); -/** - * usb_release_bandwidth - reverses effect of usb_claim_bandwidth() - * @dev: source/target of request - * @urb: request (urb->dev == dev) - * @isoc: true iff the request is isochronous - * - * This records that previously allocated bandwidth has been released. - * Bandwidth is released when endpoints are removed from the host controller's - * periodic schedule. +/* + * Some usb host controllers can only perform dma using a small SRAM area. + * The usb core itself is however optimized for host controllers that can dma + * using regular system memory - like pci devices doing bus mastering. + * + * To support host controllers with limited dma capabilites we provide dma + * bounce buffers. This feature can be enabled using the HCD_LOCAL_MEM flag. + * For this to work properly the host controller code must first use the + * function dma_declare_coherent_memory() to point out which memory area + * that should be used for dma allocations. + * + * The HCD_LOCAL_MEM flag then tells the usb code to allocate all data for + * dma using dma_alloc_coherent() which in turn allocates from the memory + * area pointed out with dma_declare_coherent_memory(). + * + * So, to summarize... + * + * - We need "local" memory, canonical example being + * a small SRAM on a discrete controller being the + * only memory that the controller can read ... + * (a) "normal" kernel memory is no good, and + * (b) there's not enough to share + * + * - The only *portable* hook for such stuff in the + * DMA framework is dma_declare_coherent_memory() + * + * - So we use that, even though the primary requirement + * is that the memory be "local" (hence addressable + * by that device), not "coherent". + * */ -void usb_release_bandwidth (struct usb_device *dev, struct urb *urb, int isoc) + +static int hcd_alloc_coherent(struct usb_bus *bus, + gfp_t mem_flags, dma_addr_t *dma_handle, + void **vaddr_handle, size_t size, + enum dma_data_direction dir) { - dev->bus->bandwidth_allocated -= urb->bandwidth; - if (isoc) - dev->bus->bandwidth_isoc_reqs--; - else - dev->bus->bandwidth_int_reqs--; - -#ifdef USB_BANDWIDTH_MESSAGES - dev_dbg (&dev->dev, "bandwidth alloc reduced by %d (%s) to %d for %d requesters\n", - urb->bandwidth, - isoc ? "ISOC" : "INTR", - dev->bus->bandwidth_allocated, - dev->bus->bandwidth_int_reqs + dev->bus->bandwidth_isoc_reqs); -#endif - urb->bandwidth = 0; -} -EXPORT_SYMBOL (usb_release_bandwidth); + unsigned char *vaddr; + if (*vaddr_handle == NULL) { + WARN_ON_ONCE(1); + return -EFAULT; + } -/*-------------------------------------------------------------------------*/ + vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr), + mem_flags, dma_handle); + if (!vaddr) + return -ENOMEM; -/* - * Generic HC operations. - */ + /* + * Store the virtual address of the buffer at the end + * of the allocated dma buffer. The size of the buffer + * may be uneven so use unaligned functions instead + * of just rounding up. It makes sense to optimize for + * memory footprint over access speed since the amount + * of memory available for dma may be limited. + */ + put_unaligned((unsigned long)*vaddr_handle, + (unsigned long *)(vaddr + size)); -/*-------------------------------------------------------------------------*/ + if (dir == DMA_TO_DEVICE) + memcpy(vaddr, *vaddr_handle, size); + + *vaddr_handle = vaddr; + return 0; +} -static void urb_unlink (struct urb *urb) +static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle, + void **vaddr_handle, size_t size, + enum dma_data_direction dir) { - unsigned long flags; + unsigned char *vaddr = *vaddr_handle; - /* Release any periodic transfer bandwidth */ - if (urb->bandwidth) - usb_release_bandwidth (urb->dev, urb, - usb_pipeisoc (urb->pipe)); + vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size)); - /* clear all state linking urb to this dev (and hcd) */ + if (dir == DMA_FROM_DEVICE) + memcpy(vaddr, *vaddr_handle, size); + + hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle); - spin_lock_irqsave (&hcd_data_lock, flags); - list_del_init (&urb->urb_list); - spin_unlock_irqrestore (&hcd_data_lock, flags); - usb_put_dev (urb->dev); + *vaddr_handle = vaddr; + *dma_handle = 0; } +void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + if (urb->transfer_flags & URB_SETUP_MAP_SINGLE) + dma_unmap_single(hcd->self.controller, + urb->setup_dma, + sizeof(struct usb_ctrlrequest), + DMA_TO_DEVICE); + else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL) + hcd_free_coherent(urb->dev->bus, + &urb->setup_dma, + (void **) &urb->setup_packet, + sizeof(struct usb_ctrlrequest), + DMA_TO_DEVICE); + + /* Make it safe to call this routine more than once */ + urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL); +} +EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma); -/* may be called in any context with a valid urb->dev usecount - * caller surrenders "ownership" of urb - * expects usb_submit_urb() to have sanity checked and conditioned all - * inputs in the urb - */ -static int hcd_submit_urb (struct urb *urb, gfp_t mem_flags) +static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) { - int status; - struct usb_hcd *hcd = urb->dev->bus->hcpriv; - struct usb_host_endpoint *ep; - unsigned long flags; + if (hcd->driver->unmap_urb_for_dma) + hcd->driver->unmap_urb_for_dma(hcd, urb); + else + usb_hcd_unmap_urb_for_dma(hcd, urb); +} - if (!hcd) - return -ENODEV; +void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + enum dma_data_direction dir; + + usb_hcd_unmap_urb_setup_for_dma(hcd, urb); + + dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + if (urb->transfer_flags & URB_DMA_MAP_SG) + dma_unmap_sg(hcd->self.controller, + urb->sg, + urb->num_sgs, + dir); + else if (urb->transfer_flags & URB_DMA_MAP_PAGE) + dma_unmap_page(hcd->self.controller, + urb->transfer_dma, + urb->transfer_buffer_length, + dir); + else if (urb->transfer_flags & URB_DMA_MAP_SINGLE) + dma_unmap_single(hcd->self.controller, + urb->transfer_dma, + urb->transfer_buffer_length, + dir); + else if (urb->transfer_flags & URB_MAP_LOCAL) + hcd_free_coherent(urb->dev->bus, + &urb->transfer_dma, + &urb->transfer_buffer, + urb->transfer_buffer_length, + dir); + + /* Make it safe to call this routine more than once */ + urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE | + URB_DMA_MAP_SINGLE | URB_MAP_LOCAL); +} +EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma); - usbmon_urb_submit(&hcd->self, urb); +static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + if (hcd->driver->map_urb_for_dma) + return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags); + else + return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); +} - /* - * Atomically queue the urb, first to our records, then to the HCD. - * Access to urb->status is controlled by urb->lock ... changes on - * i/o completion (normal or fault) or unlinking. - */ +int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + enum dma_data_direction dir; + int ret = 0; - // FIXME: verify that quiescing hc works right (RH cleans up) + /* Map the URB's buffers for DMA access. + * Lower level HCD code should use *_dma exclusively, + * unless it uses pio or talks to another transport, + * or uses the provided scatter gather list for bulk. + */ - spin_lock_irqsave (&hcd_data_lock, flags); - ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out) - [usb_pipeendpoint(urb->pipe)]; - if (unlikely (!ep)) - status = -ENOENT; - else if (unlikely (urb->reject)) - status = -EPERM; - else switch (hcd->state) { - case HC_STATE_RUNNING: - case HC_STATE_RESUMING: -doit: - usb_get_dev (urb->dev); - list_add_tail (&urb->urb_list, &ep->urb_list); - status = 0; - break; - case HC_STATE_SUSPENDED: - /* HC upstream links (register access, wakeup signaling) can work - * even when the downstream links (and DMA etc) are quiesced; let - * usbcore talk to the root hub. - */ - if (hcd->self.controller->power.power_state.event == PM_EVENT_ON - && urb->dev->parent == NULL) - goto doit; - /* FALL THROUGH */ - default: - status = -ESHUTDOWN; - break; + if (usb_endpoint_xfer_control(&urb->ep->desc)) { + if (hcd->self.uses_pio_for_control) + return ret; + if (hcd->self.uses_dma) { + urb->setup_dma = dma_map_single( + hcd->self.controller, + urb->setup_packet, + sizeof(struct usb_ctrlrequest), + DMA_TO_DEVICE); + if (dma_mapping_error(hcd->self.controller, + urb->setup_dma)) + return -EAGAIN; + urb->transfer_flags |= URB_SETUP_MAP_SINGLE; + } else if (hcd->driver->flags & HCD_LOCAL_MEM) { + ret = hcd_alloc_coherent( + urb->dev->bus, mem_flags, + &urb->setup_dma, + (void **)&urb->setup_packet, + sizeof(struct usb_ctrlrequest), + DMA_TO_DEVICE); + if (ret) + return ret; + urb->transfer_flags |= URB_SETUP_MAP_LOCAL; + } } - spin_unlock_irqrestore (&hcd_data_lock, flags); - if (status) { - INIT_LIST_HEAD (&urb->urb_list); - usbmon_urb_submit_error(&hcd->self, urb, status); - return status; + + dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + if (urb->transfer_buffer_length != 0 + && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) { + if (hcd->self.uses_dma) { + if (urb->num_sgs) { + int n; + + /* We don't support sg for isoc transfers ! */ + if (usb_endpoint_xfer_isoc(&urb->ep->desc)) { + WARN_ON(1); + return -EINVAL; + } + + n = dma_map_sg( + hcd->self.controller, + urb->sg, + urb->num_sgs, + dir); + if (n <= 0) + ret = -EAGAIN; + else + urb->transfer_flags |= URB_DMA_MAP_SG; + urb->num_mapped_sgs = n; + if (n != urb->num_sgs) + urb->transfer_flags |= + URB_DMA_SG_COMBINED; + } else if (urb->sg) { + struct scatterlist *sg = urb->sg; + urb->transfer_dma = dma_map_page( + hcd->self.controller, + sg_page(sg), + sg->offset, + urb->transfer_buffer_length, + dir); + if (dma_mapping_error(hcd->self.controller, + urb->transfer_dma)) + ret = -EAGAIN; + else + urb->transfer_flags |= URB_DMA_MAP_PAGE; + } else if (is_vmalloc_addr(urb->transfer_buffer)) { + WARN_ONCE(1, "transfer buffer not dma capable\n"); + ret = -EAGAIN; + } else { + urb->transfer_dma = dma_map_single( + hcd->self.controller, + urb->transfer_buffer, + urb->transfer_buffer_length, + dir); + if (dma_mapping_error(hcd->self.controller, + urb->transfer_dma)) + ret = -EAGAIN; + else + urb->transfer_flags |= URB_DMA_MAP_SINGLE; + } + } else if (hcd->driver->flags & HCD_LOCAL_MEM) { + ret = hcd_alloc_coherent( + urb->dev->bus, mem_flags, + &urb->transfer_dma, + &urb->transfer_buffer, + urb->transfer_buffer_length, + dir); + if (ret == 0) + urb->transfer_flags |= URB_MAP_LOCAL; + } + if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE | + URB_SETUP_MAP_LOCAL))) + usb_hcd_unmap_urb_for_dma(hcd, urb); } + return ret; +} +EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma); + +/*-------------------------------------------------------------------------*/ + +/* may be called in any context with a valid urb->dev usecount + * caller surrenders "ownership" of urb + * expects usb_submit_urb() to have sanity checked and conditioned all + * inputs in the urb + */ +int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags) +{ + int status; + struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus); /* increment urb's reference count as part of giving it to the HCD - * (which now controls it). HCD guarantees that it either returns + * (which will control it). HCD guarantees that it either returns * an error or calls giveback(), but not both. */ - urb = usb_get_urb (urb); - atomic_inc (&urb->use_count); - - if (urb->dev == hcd->self.root_hub) { - /* NOTE: requirement on hub callers (usbfs and the hub - * driver, for now) that URBs' urb->transfer_buffer be - * valid and usb_buffer_{sync,unmap}() not be needed, since - * they could clobber root hub response data. - */ - status = rh_urb_enqueue (hcd, urb); - goto done; - } + usb_get_urb(urb); + atomic_inc(&urb->use_count); + atomic_inc(&urb->dev->urbnum); + usbmon_urb_submit(&hcd->self, urb); - /* lower level hcd code should use *_dma exclusively, - * unless it uses pio or talks to another transport. + /* NOTE requirements on root-hub callers (usbfs and the hub + * driver, for now): URBs' urb->transfer_buffer must be + * valid and usb_buffer_{sync,unmap}() not be needed, since + * they could clobber root hub response data. Also, control + * URBs must be submitted in process context with interrupts + * enabled. */ - if (hcd->self.controller->dma_mask) { - if (usb_pipecontrol (urb->pipe) - && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) - urb->setup_dma = dma_map_single ( - hcd->self.controller, - urb->setup_packet, - sizeof (struct usb_ctrlrequest), - DMA_TO_DEVICE); - if (urb->transfer_buffer_length != 0 - && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) - urb->transfer_dma = dma_map_single ( - hcd->self.controller, - urb->transfer_buffer, - urb->transfer_buffer_length, - usb_pipein (urb->pipe) - ? DMA_FROM_DEVICE - : DMA_TO_DEVICE); + + if (is_root_hub(urb->dev)) { + status = rh_urb_enqueue(hcd, urb); + } else { + status = map_urb_for_dma(hcd, urb, mem_flags); + if (likely(status == 0)) { + status = hcd->driver->urb_enqueue(hcd, urb, mem_flags); + if (unlikely(status)) + unmap_urb_for_dma(hcd, urb); + } } - status = hcd->driver->urb_enqueue (hcd, ep, urb, mem_flags); -done: - if (unlikely (status)) { - urb_unlink (urb); - atomic_dec (&urb->use_count); - if (urb->reject) - wake_up (&usb_kill_urb_queue); - usb_put_urb (urb); + if (unlikely(status)) { usbmon_urb_submit_error(&hcd->self, urb, status); + urb->hcpriv = NULL; + INIT_LIST_HEAD(&urb->urb_list); + atomic_dec(&urb->use_count); + atomic_dec(&urb->dev->urbnum); + if (atomic_read(&urb->reject)) + wake_up(&usb_kill_urb_queue); + usb_put_urb(urb); } return status; } /*-------------------------------------------------------------------------*/ -/* called in any context */ -static int hcd_get_frame_number (struct usb_device *udev) -{ - struct usb_hcd *hcd = (struct usb_hcd *)udev->bus->hcpriv; - if (!HC_IS_RUNNING (hcd->state)) - return -ESHUTDOWN; - return hcd->driver->get_frame_number (hcd); -} - -/*-------------------------------------------------------------------------*/ - /* this makes the hcd giveback() the urb more quickly, by kicking it * off hardware queues (which may take a while) and returning it as * soon as practical. we've already set up the urb's return status, * but we can't know if the callback completed already. */ -static int -unlink1 (struct usb_hcd *hcd, struct urb *urb) +static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status) { int value; - if (urb->dev == hcd->self.root_hub) - value = usb_rh_urb_dequeue (hcd, urb); + if (is_root_hub(urb->dev)) + value = usb_rh_urb_dequeue(hcd, urb, status); else { /* The only reason an HCD might fail this call is if * it has not yet fully queued the urb to begin with. * Such failures should be harmless. */ - value = hcd->driver->urb_dequeue (hcd, urb); + value = hcd->driver->urb_dequeue(hcd, urb, status); } - - if (value != 0) - dev_dbg (hcd->self.controller, "dequeue %p --> %d\n", - urb, value); return value; } @@ -1258,283 +1618,681 @@ unlink1 (struct usb_hcd *hcd, struct urb *urb) * caller guarantees urb won't be recycled till both unlink() * and the urb's completion function return */ -static int hcd_unlink_urb (struct urb *urb, int status) +int usb_hcd_unlink_urb (struct urb *urb, int status) { - struct usb_host_endpoint *ep; - struct usb_hcd *hcd = NULL; - struct device *sys = NULL; - unsigned long flags; - struct list_head *tmp; - int retval; + struct usb_hcd *hcd; + int retval = -EIDRM; + unsigned long flags; - if (!urb) - return -EINVAL; - if (!urb->dev || !urb->dev->bus) - return -ENODEV; - ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out) - [usb_pipeendpoint(urb->pipe)]; - if (!ep) - return -ENODEV; + /* Prevent the device and bus from going away while + * the unlink is carried out. If they are already gone + * then urb->use_count must be 0, since disconnected + * devices can't have any active URBs. + */ + spin_lock_irqsave(&hcd_urb_unlink_lock, flags); + if (atomic_read(&urb->use_count) > 0) { + retval = 0; + usb_get_dev(urb->dev); + } + spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags); + if (retval == 0) { + hcd = bus_to_hcd(urb->dev->bus); + retval = unlink1(hcd, urb, status); + usb_put_dev(urb->dev); + } + + if (retval == 0) + retval = -EINPROGRESS; + else if (retval != -EIDRM && retval != -EBUSY) + dev_dbg(&urb->dev->dev, "hcd_unlink_urb %p fail %d\n", + urb, retval); + return retval; +} + +/*-------------------------------------------------------------------------*/ + +static void __usb_hcd_giveback_urb(struct urb *urb) +{ + struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus); + struct usb_anchor *anchor = urb->anchor; + int status = urb->unlinked; + unsigned long flags; + + urb->hcpriv = NULL; + if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) && + urb->actual_length < urb->transfer_buffer_length && + !status)) + status = -EREMOTEIO; + + unmap_urb_for_dma(hcd, urb); + usbmon_urb_complete(&hcd->self, urb, status); + usb_anchor_suspend_wakeups(anchor); + usb_unanchor_urb(urb); + + /* pass ownership to the completion handler */ + urb->status = status; /* - * we contend for urb->status with the hcd core, - * which changes it while returning the urb. + * We disable local IRQs here avoid possible deadlock because + * drivers may call spin_lock() to hold lock which might be + * acquired in one hard interrupt handler. * - * Caller guaranteed that the urb pointer hasn't been freed, and - * that it was submitted. But as a rule it can't know whether or - * not it's already been unlinked ... so we respect the reversed - * lock sequence needed for the usb_hcd_giveback_urb() code paths - * (urb lock, then hcd_data_lock) in case some other CPU is now - * unlinking it. + * The local_irq_save()/local_irq_restore() around complete() + * will be removed if current USB drivers have been cleaned up + * and no one may trigger the above deadlock situation when + * running complete() in tasklet. */ - spin_lock_irqsave (&urb->lock, flags); - spin_lock (&hcd_data_lock); + local_irq_save(flags); + urb->complete(urb); + local_irq_restore(flags); + + usb_anchor_resume_wakeups(anchor); + atomic_dec(&urb->use_count); + if (unlikely(atomic_read(&urb->reject))) + wake_up(&usb_kill_urb_queue); + usb_put_urb(urb); +} - sys = &urb->dev->dev; - hcd = urb->dev->bus->hcpriv; - if (hcd == NULL) { - retval = -ENODEV; - goto done; +static void usb_giveback_urb_bh(unsigned long param) +{ + struct giveback_urb_bh *bh = (struct giveback_urb_bh *)param; + struct list_head local_list; + + spin_lock_irq(&bh->lock); + bh->running = true; + restart: + list_replace_init(&bh->head, &local_list); + spin_unlock_irq(&bh->lock); + + while (!list_empty(&local_list)) { + struct urb *urb; + + urb = list_entry(local_list.next, struct urb, urb_list); + list_del_init(&urb->urb_list); + bh->completing_ep = urb->ep; + __usb_hcd_giveback_urb(urb); + bh->completing_ep = NULL; } - /* insist the urb is still queued */ - list_for_each(tmp, &ep->urb_list) { - if (tmp == &urb->urb_list) - break; - } - if (tmp != &urb->urb_list) { - retval = -EIDRM; - goto done; - } + /* check if there are new URBs to giveback */ + spin_lock_irq(&bh->lock); + if (!list_empty(&bh->head)) + goto restart; + bh->running = false; + spin_unlock_irq(&bh->lock); +} - /* Any status except -EINPROGRESS means something already started to - * unlink this URB from the hardware. So there's no more work to do. - */ - if (urb->status != -EINPROGRESS) { - retval = -EBUSY; - goto done; - } +/** + * usb_hcd_giveback_urb - return URB from HCD to device driver + * @hcd: host controller returning the URB + * @urb: urb being returned to the USB device driver. + * @status: completion status code for the URB. + * Context: in_interrupt() + * + * This hands the URB from HCD to its USB device driver, using its + * completion function. The HCD has freed all per-urb resources + * (and is done using urb->hcpriv). It also released all HCD locks; + * the device driver won't cause problems if it frees, modifies, + * or resubmits this URB. + * + * If @urb was unlinked, the value of @status will be overridden by + * @urb->unlinked. Erroneous short transfers are detected in case + * the HCD hasn't checked for them. + */ +void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct giveback_urb_bh *bh; + bool running, high_prio_bh; - /* IRQ setup can easily be broken so that USB controllers - * never get completion IRQs ... maybe even the ones we need to - * finish unlinking the initial failed usb_set_address() - * or device descriptor fetch. - */ - if (!hcd->saw_irq && hcd->self.root_hub != urb->dev) { - dev_warn (hcd->self.controller, "Unlink after no-IRQ? " - "Controller is probably using the wrong IRQ." - "\n"); - hcd->saw_irq = 1; - } + /* pass status to tasklet via unlinked */ + if (likely(!urb->unlinked)) + urb->unlinked = status; - urb->status = status; + if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) { + __usb_hcd_giveback_urb(urb); + return; + } - spin_unlock (&hcd_data_lock); - spin_unlock_irqrestore (&urb->lock, flags); + if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) { + bh = &hcd->high_prio_bh; + high_prio_bh = true; + } else { + bh = &hcd->low_prio_bh; + high_prio_bh = false; + } - retval = unlink1 (hcd, urb); - if (retval == 0) - retval = -EINPROGRESS; - return retval; + spin_lock(&bh->lock); + list_add_tail(&urb->urb_list, &bh->head); + running = bh->running; + spin_unlock(&bh->lock); -done: - spin_unlock (&hcd_data_lock); - spin_unlock_irqrestore (&urb->lock, flags); - if (retval != -EIDRM && sys && sys->driver) - dev_dbg (sys, "hcd_unlink_urb %p fail %d\n", urb, retval); - return retval; + if (running) + ; + else if (high_prio_bh) + tasklet_hi_schedule(&bh->bh); + else + tasklet_schedule(&bh->bh); } +EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb); /*-------------------------------------------------------------------------*/ -/* disables the endpoint: cancels any pending urbs, then synchronizes with - * the hcd to make sure all endpoint state is gone from hardware. use for - * set_configuration, set_interface, driver removal, physical disconnect. - * - * example: a qh stored in ep->hcpriv, holding state related to endpoint - * type, maxpacket size, toggle, halt status, and scheduling. +/* Cancel all URBs pending on this endpoint and wait for the endpoint's + * queue to drain completely. The caller must first insure that no more + * URBs can be submitted for this endpoint. */ -static void -hcd_endpoint_disable (struct usb_device *udev, struct usb_host_endpoint *ep) +void usb_hcd_flush_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep) { struct usb_hcd *hcd; struct urb *urb; - hcd = udev->bus->hcpriv; - - WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT && - udev->state != USB_STATE_NOTATTACHED); - - local_irq_disable (); - - /* FIXME move most of this into message.c as part of its - * endpoint disable logic - */ + if (!ep) + return; + might_sleep(); + hcd = bus_to_hcd(udev->bus); - /* ep is already gone from udev->ep_{in,out}[]; no more submits */ + /* No more submits can occur */ + spin_lock_irq(&hcd_urb_list_lock); rescan: - spin_lock (&hcd_data_lock); list_for_each_entry (urb, &ep->urb_list, urb_list) { - int tmp; + int is_in; - /* another cpu may be in hcd, spinning on hcd_data_lock - * to giveback() this urb. the races here should be - * small, but a full fix needs a new "can't submit" - * urb state. - * FIXME urb->reject should allow that... - */ - if (urb->status != -EINPROGRESS) + if (urb->unlinked) continue; usb_get_urb (urb); - spin_unlock (&hcd_data_lock); - - spin_lock (&urb->lock); - tmp = urb->status; - if (tmp == -EINPROGRESS) - urb->status = -ESHUTDOWN; - spin_unlock (&urb->lock); - - /* kick hcd unless it's already returning this */ - if (tmp == -EINPROGRESS) { - tmp = urb->pipe; - unlink1 (hcd, urb); - dev_dbg (hcd->self.controller, - "shutdown urb %p pipe %08x ep%d%s%s\n", - urb, tmp, usb_pipeendpoint (tmp), - (tmp & USB_DIR_IN) ? "in" : "out", - ({ char *s; \ - switch (usb_pipetype (tmp)) { \ - case PIPE_CONTROL: s = ""; break; \ - case PIPE_BULK: s = "-bulk"; break; \ - case PIPE_INTERRUPT: s = "-intr"; break; \ - default: s = "-iso"; break; \ - }; s;})); - } + is_in = usb_urb_dir_in(urb); + spin_unlock(&hcd_urb_list_lock); + + /* kick hcd */ + unlink1(hcd, urb, -ESHUTDOWN); + dev_dbg (hcd->self.controller, + "shutdown urb %p ep%d%s%s\n", + urb, usb_endpoint_num(&ep->desc), + is_in ? "in" : "out", + ({ char *s; + + switch (usb_endpoint_type(&ep->desc)) { + case USB_ENDPOINT_XFER_CONTROL: + s = ""; break; + case USB_ENDPOINT_XFER_BULK: + s = "-bulk"; break; + case USB_ENDPOINT_XFER_INT: + s = "-intr"; break; + default: + s = "-iso"; break; + }; + s; + })); usb_put_urb (urb); /* list contents may have changed */ + spin_lock(&hcd_urb_list_lock); goto rescan; } - spin_unlock (&hcd_data_lock); - local_irq_enable (); + spin_unlock_irq(&hcd_urb_list_lock); + + /* Wait until the endpoint queue is completely empty */ + while (!list_empty (&ep->urb_list)) { + spin_lock_irq(&hcd_urb_list_lock); + + /* The list may have changed while we acquired the spinlock */ + urb = NULL; + if (!list_empty (&ep->urb_list)) { + urb = list_entry (ep->urb_list.prev, struct urb, + urb_list); + usb_get_urb (urb); + } + spin_unlock_irq(&hcd_urb_list_lock); + + if (urb) { + usb_kill_urb (urb); + usb_put_urb (urb); + } + } +} - /* synchronize with the hardware, so old configuration state - * clears out immediately (and will be freed). +/** + * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds + * the bus bandwidth + * @udev: target &usb_device + * @new_config: new configuration to install + * @cur_alt: the current alternate interface setting + * @new_alt: alternate interface setting that is being installed + * + * To change configurations, pass in the new configuration in new_config, + * and pass NULL for cur_alt and new_alt. + * + * To reset a device's configuration (put the device in the ADDRESSED state), + * pass in NULL for new_config, cur_alt, and new_alt. + * + * To change alternate interface settings, pass in NULL for new_config, + * pass in the current alternate interface setting in cur_alt, + * and pass in the new alternate interface setting in new_alt. + * + * Return: An error if the requested bandwidth change exceeds the + * bus bandwidth or host controller internal resources. + */ +int usb_hcd_alloc_bandwidth(struct usb_device *udev, + struct usb_host_config *new_config, + struct usb_host_interface *cur_alt, + struct usb_host_interface *new_alt) +{ + int num_intfs, i, j; + struct usb_host_interface *alt = NULL; + int ret = 0; + struct usb_hcd *hcd; + struct usb_host_endpoint *ep; + + hcd = bus_to_hcd(udev->bus); + if (!hcd->driver->check_bandwidth) + return 0; + + /* Configuration is being removed - set configuration 0 */ + if (!new_config && !cur_alt) { + for (i = 1; i < 16; ++i) { + ep = udev->ep_out[i]; + if (ep) + hcd->driver->drop_endpoint(hcd, udev, ep); + ep = udev->ep_in[i]; + if (ep) + hcd->driver->drop_endpoint(hcd, udev, ep); + } + hcd->driver->check_bandwidth(hcd, udev); + return 0; + } + /* Check if the HCD says there's enough bandwidth. Enable all endpoints + * each interface's alt setting 0 and ask the HCD to check the bandwidth + * of the bus. There will always be bandwidth for endpoint 0, so it's + * ok to exclude it. */ - might_sleep (); + if (new_config) { + num_intfs = new_config->desc.bNumInterfaces; + /* Remove endpoints (except endpoint 0, which is always on the + * schedule) from the old config from the schedule + */ + for (i = 1; i < 16; ++i) { + ep = udev->ep_out[i]; + if (ep) { + ret = hcd->driver->drop_endpoint(hcd, udev, ep); + if (ret < 0) + goto reset; + } + ep = udev->ep_in[i]; + if (ep) { + ret = hcd->driver->drop_endpoint(hcd, udev, ep); + if (ret < 0) + goto reset; + } + } + for (i = 0; i < num_intfs; ++i) { + struct usb_host_interface *first_alt; + int iface_num; + + first_alt = &new_config->intf_cache[i]->altsetting[0]; + iface_num = first_alt->desc.bInterfaceNumber; + /* Set up endpoints for alternate interface setting 0 */ + alt = usb_find_alt_setting(new_config, iface_num, 0); + if (!alt) + /* No alt setting 0? Pick the first setting. */ + alt = first_alt; + + for (j = 0; j < alt->desc.bNumEndpoints; j++) { + ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]); + if (ret < 0) + goto reset; + } + } + } + if (cur_alt && new_alt) { + struct usb_interface *iface = usb_ifnum_to_if(udev, + cur_alt->desc.bInterfaceNumber); + + if (!iface) + return -EINVAL; + if (iface->resetting_device) { + /* + * The USB core just reset the device, so the xHCI host + * and the device will think alt setting 0 is installed. + * However, the USB core will pass in the alternate + * setting installed before the reset as cur_alt. Dig + * out the alternate setting 0 structure, or the first + * alternate setting if a broken device doesn't have alt + * setting 0. + */ + cur_alt = usb_altnum_to_altsetting(iface, 0); + if (!cur_alt) + cur_alt = &iface->altsetting[0]; + } + + /* Drop all the endpoints in the current alt setting */ + for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) { + ret = hcd->driver->drop_endpoint(hcd, udev, + &cur_alt->endpoint[i]); + if (ret < 0) + goto reset; + } + /* Add all the endpoints in the new alt setting */ + for (i = 0; i < new_alt->desc.bNumEndpoints; i++) { + ret = hcd->driver->add_endpoint(hcd, udev, + &new_alt->endpoint[i]); + if (ret < 0) + goto reset; + } + } + ret = hcd->driver->check_bandwidth(hcd, udev); +reset: + if (ret < 0) + hcd->driver->reset_bandwidth(hcd, udev); + return ret; +} + +/* Disables the endpoint: synchronizes with the hcd to make sure all + * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must + * have been called previously. Use for set_configuration, set_interface, + * driver removal, physical disconnect. + * + * example: a qh stored in ep->hcpriv, holding state related to endpoint + * type, maxpacket size, toggle, halt status, and scheduling. + */ +void usb_hcd_disable_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct usb_hcd *hcd; + + might_sleep(); + hcd = bus_to_hcd(udev->bus); if (hcd->driver->endpoint_disable) - hcd->driver->endpoint_disable (hcd, ep); + hcd->driver->endpoint_disable(hcd, ep); +} + +/** + * usb_hcd_reset_endpoint - reset host endpoint state + * @udev: USB device. + * @ep: the endpoint to reset. + * + * Resets any host endpoint state such as the toggle bit, sequence + * number and current window. + */ +void usb_hcd_reset_endpoint(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + if (hcd->driver->endpoint_reset) + hcd->driver->endpoint_reset(hcd, ep); + else { + int epnum = usb_endpoint_num(&ep->desc); + int is_out = usb_endpoint_dir_out(&ep->desc); + int is_control = usb_endpoint_xfer_control(&ep->desc); + + usb_settoggle(udev, epnum, is_out, 0); + if (is_control) + usb_settoggle(udev, epnum, !is_out, 0); + } +} + +/** + * usb_alloc_streams - allocate bulk endpoint stream IDs. + * @interface: alternate setting that includes all endpoints. + * @eps: array of endpoints that need streams. + * @num_eps: number of endpoints in the array. + * @num_streams: number of streams to allocate. + * @mem_flags: flags hcd should use to allocate memory. + * + * Sets up a group of bulk endpoints to have @num_streams stream IDs available. + * Drivers may queue multiple transfers to different stream IDs, which may + * complete in a different order than they were queued. + * + * Return: On success, the number of allocated streams. On failure, a negative + * error code. + */ +int usb_alloc_streams(struct usb_interface *interface, + struct usb_host_endpoint **eps, unsigned int num_eps, + unsigned int num_streams, gfp_t mem_flags) +{ + struct usb_hcd *hcd; + struct usb_device *dev; + int i, ret; + + dev = interface_to_usbdev(interface); + hcd = bus_to_hcd(dev->bus); + if (!hcd->driver->alloc_streams || !hcd->driver->free_streams) + return -EINVAL; + if (dev->speed != USB_SPEED_SUPER) + return -EINVAL; + + for (i = 0; i < num_eps; i++) { + /* Streams only apply to bulk endpoints. */ + if (!usb_endpoint_xfer_bulk(&eps[i]->desc)) + return -EINVAL; + /* Re-alloc is not allowed */ + if (eps[i]->streams) + return -EINVAL; + } + + ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps, + num_streams, mem_flags); + if (ret < 0) + return ret; + + for (i = 0; i < num_eps; i++) + eps[i]->streams = ret; + + return ret; +} +EXPORT_SYMBOL_GPL(usb_alloc_streams); + +/** + * usb_free_streams - free bulk endpoint stream IDs. + * @interface: alternate setting that includes all endpoints. + * @eps: array of endpoints to remove streams from. + * @num_eps: number of endpoints in the array. + * @mem_flags: flags hcd should use to allocate memory. + * + * Reverts a group of bulk endpoints back to not using stream IDs. + * Can fail if we are given bad arguments, or HCD is broken. + * + * Return: 0 on success. On failure, a negative error code. + */ +int usb_free_streams(struct usb_interface *interface, + struct usb_host_endpoint **eps, unsigned int num_eps, + gfp_t mem_flags) +{ + struct usb_hcd *hcd; + struct usb_device *dev; + int i, ret; + + dev = interface_to_usbdev(interface); + hcd = bus_to_hcd(dev->bus); + if (dev->speed != USB_SPEED_SUPER) + return -EINVAL; + + /* Double-free is not allowed */ + for (i = 0; i < num_eps; i++) + if (!eps[i] || !eps[i]->streams) + return -EINVAL; + + ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags); + if (ret < 0) + return ret; + + for (i = 0; i < num_eps; i++) + eps[i]->streams = 0; + + return ret; +} +EXPORT_SYMBOL_GPL(usb_free_streams); + +/* Protect against drivers that try to unlink URBs after the device + * is gone, by waiting until all unlinks for @udev are finished. + * Since we don't currently track URBs by device, simply wait until + * nothing is running in the locked region of usb_hcd_unlink_urb(). + */ +void usb_hcd_synchronize_unlinks(struct usb_device *udev) +{ + spin_lock_irq(&hcd_urb_unlink_lock); + spin_unlock_irq(&hcd_urb_unlink_lock); +} + +/*-------------------------------------------------------------------------*/ + +/* called in any context */ +int usb_hcd_get_frame_number (struct usb_device *udev) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + if (!HCD_RH_RUNNING(hcd)) + return -ESHUTDOWN; + return hcd->driver->get_frame_number (hcd); } /*-------------------------------------------------------------------------*/ #ifdef CONFIG_PM -int hcd_bus_suspend (struct usb_bus *bus) +int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg) { - struct usb_hcd *hcd; - int status; + struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self); + int status; + int old_state = hcd->state; + + dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n", + (PMSG_IS_AUTO(msg) ? "auto-" : ""), + rhdev->do_remote_wakeup); + if (HCD_DEAD(hcd)) { + dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend"); + return 0; + } - hcd = container_of (bus, struct usb_hcd, self); - if (!hcd->driver->bus_suspend) - return -ENOENT; - hcd->state = HC_STATE_QUIESCING; - status = hcd->driver->bus_suspend (hcd); - if (status == 0) + if (!hcd->driver->bus_suspend) { + status = -ENOENT; + } else { + clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + hcd->state = HC_STATE_QUIESCING; + status = hcd->driver->bus_suspend(hcd); + } + if (status == 0) { + usb_set_device_state(rhdev, USB_STATE_SUSPENDED); hcd->state = HC_STATE_SUSPENDED; - else - dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n", + + /* Did we race with a root-hub wakeup event? */ + if (rhdev->do_remote_wakeup) { + char buffer[6]; + + status = hcd->driver->hub_status_data(hcd, buffer); + if (status != 0) { + dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n"); + hcd_bus_resume(rhdev, PMSG_AUTO_RESUME); + status = -EBUSY; + } + } + } else { + spin_lock_irq(&hcd_root_hub_lock); + if (!HCD_DEAD(hcd)) { + set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + hcd->state = old_state; + } + spin_unlock_irq(&hcd_root_hub_lock); + dev_dbg(&rhdev->dev, "bus %s fail, err %d\n", "suspend", status); + } return status; } -int hcd_bus_resume (struct usb_bus *bus) +int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) { - struct usb_hcd *hcd; - int status; - - hcd = container_of (bus, struct usb_hcd, self); + struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self); + int status; + int old_state = hcd->state; + + dev_dbg(&rhdev->dev, "usb %sresume\n", + (PMSG_IS_AUTO(msg) ? "auto-" : "")); + if (HCD_DEAD(hcd)) { + dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume"); + return 0; + } if (!hcd->driver->bus_resume) return -ENOENT; - if (hcd->state == HC_STATE_RUNNING) + if (HCD_RH_RUNNING(hcd)) return 0; + hcd->state = HC_STATE_RESUMING; - status = hcd->driver->bus_resume (hcd); - if (status == 0) - hcd->state = HC_STATE_RUNNING; - else { - dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n", + status = hcd->driver->bus_resume(hcd); + clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); + if (status == 0) { + struct usb_device *udev; + int port1; + + spin_lock_irq(&hcd_root_hub_lock); + if (!HCD_DEAD(hcd)) { + usb_set_device_state(rhdev, rhdev->actconfig + ? USB_STATE_CONFIGURED + : USB_STATE_ADDRESS); + set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + hcd->state = HC_STATE_RUNNING; + } + spin_unlock_irq(&hcd_root_hub_lock); + + /* + * Check whether any of the enabled ports on the root hub are + * unsuspended. If they are then a TRSMRCY delay is needed + * (this is what the USB-2 spec calls a "global resume"). + * Otherwise we can skip the delay. + */ + usb_hub_for_each_child(rhdev, port1, udev) { + if (udev->state != USB_STATE_NOTATTACHED && + !udev->port_is_suspended) { + usleep_range(10000, 11000); /* TRSMRCY */ + break; + } + } + } else { + hcd->state = old_state; + dev_dbg(&rhdev->dev, "bus %s fail, err %d\n", "resume", status); - usb_hc_died(hcd); + if (status != -ESHUTDOWN) + usb_hc_died(hcd); } return status; } -/* - * usb_hcd_suspend_root_hub - HCD autosuspends downstream ports - * @hcd: host controller for this root hub - * - * This call arranges that usb_hcd_resume_root_hub() is safe to call later; - * that the HCD's root hub polling is deactivated; and that the root's hub - * driver is suspended. HCDs may call this to autosuspend when their root - * hub's downstream ports are all inactive: unpowered, disconnected, - * disabled, or suspended. - * - * The HCD will autoresume on device connect change detection (using SRP - * or a D+/D- pullup). The HCD also autoresumes on remote wakeup signaling - * from any ports that are suspended (if that is enabled). In most cases, - * overcurrent signaling (on powered ports) will also start autoresume. - * - * Always called with IRQs blocked. - */ -void usb_hcd_suspend_root_hub (struct usb_hcd *hcd) -{ - struct urb *urb; - - spin_lock (&hcd_root_hub_lock); - usb_suspend_root_hub (hcd->self.root_hub); +#endif /* CONFIG_PM */ - /* force status urb to complete/unlink while suspended */ - if (hcd->status_urb) { - urb = hcd->status_urb; - urb->status = -ECONNRESET; - urb->hcpriv = NULL; - urb->actual_length = 0; +#ifdef CONFIG_PM_RUNTIME - del_timer (&hcd->rh_timer); - hcd->poll_pending = 0; - hcd->status_urb = NULL; - } else - urb = NULL; - spin_unlock (&hcd_root_hub_lock); - hcd->state = HC_STATE_SUSPENDED; +/* Workqueue routine for root-hub remote wakeup */ +static void hcd_resume_work(struct work_struct *work) +{ + struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work); + struct usb_device *udev = hcd->self.root_hub; - if (urb) - usb_hcd_giveback_urb (hcd, urb, NULL); + usb_remote_wakeup(udev); } -EXPORT_SYMBOL_GPL(usb_hcd_suspend_root_hub); /** - * usb_hcd_resume_root_hub - called by HCD to resume its root hub + * usb_hcd_resume_root_hub - called by HCD to resume its root hub * @hcd: host controller for this root hub * * The USB host controller calls this function when its root hub is * suspended (with the remote wakeup feature enabled) and a remote - * wakeup request is received. It queues a request for khubd to - * resume the root hub (that is, manage its downstream ports again). + * wakeup request is received. The routine submits a workqueue request + * to resume the root hub (that is, manage its downstream ports again). */ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) { unsigned long flags; spin_lock_irqsave (&hcd_root_hub_lock, flags); - if (hcd->rh_registered) - usb_resume_root_hub (hcd->self.root_hub); + if (hcd->rh_registered) { + set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); + queue_work(pm_wq, &hcd->wakeup_work); + } spin_unlock_irqrestore (&hcd_root_hub_lock, flags); } EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); -#endif +#endif /* CONFIG_PM_RUNTIME */ /*-------------------------------------------------------------------------*/ @@ -1550,6 +2308,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); * khubd identifying and possibly configuring the device. * This is needed by OTG controller drivers, where it helps meet * HNP protocol timing requirements for starting a port reset. + * + * Return: 0 if successful. */ int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num) { @@ -1571,99 +2331,37 @@ int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num) mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10)); return status; } -EXPORT_SYMBOL (usb_bus_start_enum); +EXPORT_SYMBOL_GPL(usb_bus_start_enum); #endif /*-------------------------------------------------------------------------*/ -/* - * usb_hcd_operations - adapts usb_bus framework to HCD framework (bus glue) - */ -static struct usb_operations usb_hcd_operations = { - .get_frame_number = hcd_get_frame_number, - .submit_urb = hcd_submit_urb, - .unlink_urb = hcd_unlink_urb, - .buffer_alloc = hcd_buffer_alloc, - .buffer_free = hcd_buffer_free, - .disable = hcd_endpoint_disable, -}; - -/*-------------------------------------------------------------------------*/ - -/** - * usb_hcd_giveback_urb - return URB from HCD to device driver - * @hcd: host controller returning the URB - * @urb: urb being returned to the USB device driver. - * @regs: pt_regs, passed down to the URB completion handler - * Context: in_interrupt() - * - * This hands the URB from HCD to its USB device driver, using its - * completion function. The HCD has freed all per-urb resources - * (and is done using urb->hcpriv). It also released all HCD locks; - * the device driver won't cause problems if it frees, modifies, - * or resubmits this URB. - */ -void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs) -{ - int at_root_hub; - - at_root_hub = (urb->dev == hcd->self.root_hub); - urb_unlink (urb); - - /* lower level hcd code should use *_dma exclusively */ - if (hcd->self.controller->dma_mask && !at_root_hub) { - if (usb_pipecontrol (urb->pipe) - && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) - dma_unmap_single (hcd->self.controller, urb->setup_dma, - sizeof (struct usb_ctrlrequest), - DMA_TO_DEVICE); - if (urb->transfer_buffer_length != 0 - && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) - dma_unmap_single (hcd->self.controller, - urb->transfer_dma, - urb->transfer_buffer_length, - usb_pipein (urb->pipe) - ? DMA_FROM_DEVICE - : DMA_TO_DEVICE); - } - - usbmon_urb_complete (&hcd->self, urb); - /* pass ownership to the completion handler */ - urb->complete (urb, regs); - atomic_dec (&urb->use_count); - if (unlikely (urb->reject)) - wake_up (&usb_kill_urb_queue); - usb_put_urb (urb); -} -EXPORT_SYMBOL (usb_hcd_giveback_urb); - -/*-------------------------------------------------------------------------*/ - /** * usb_hcd_irq - hook IRQs to HCD framework (bus glue) * @irq: the IRQ being raised * @__hcd: pointer to the HCD whose IRQ is being signaled - * @r: saved hardware registers * * If the controller isn't HALTed, calls the driver's irq handler. * Checks whether the controller is now dead. + * + * Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise. */ -irqreturn_t usb_hcd_irq (int irq, void *__hcd, struct pt_regs * r) +irqreturn_t usb_hcd_irq (int irq, void *__hcd) { struct usb_hcd *hcd = __hcd; - int start = hcd->state; + irqreturn_t rc; - if (start == HC_STATE_HALT) - return IRQ_NONE; - if (hcd->driver->irq (hcd, r) == IRQ_NONE) - return IRQ_NONE; + if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) + rc = IRQ_NONE; + else if (hcd->driver->irq(hcd) == IRQ_NONE) + rc = IRQ_NONE; + else + rc = IRQ_HANDLED; - hcd->saw_irq = 1; - if (hcd->state == HC_STATE_HALT) - usb_hc_died (hcd); - return IRQ_HANDLED; + return rc; } +EXPORT_SYMBOL_GPL(usb_hcd_irq); /*-------------------------------------------------------------------------*/ @@ -1673,7 +2371,9 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd, struct pt_regs * r) * * This is called by bus glue to report a USB host controller that died * while operations may still have been pending. It's called automatically - * by the PCI glue, so only glue for non-PCI busses should need to call it. + * by the PCI glue, so only glue for non-PCI busses should need to call it. + * + * Only call this function with the primary HCD. */ void usb_hc_died (struct usb_hcd *hcd) { @@ -1682,43 +2382,61 @@ void usb_hc_died (struct usb_hcd *hcd) dev_err (hcd->self.controller, "HC died; cleaning up\n"); spin_lock_irqsave (&hcd_root_hub_lock, flags); + clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + set_bit(HCD_FLAG_DEAD, &hcd->flags); if (hcd->rh_registered) { - hcd->poll_rh = 0; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); /* make khubd clean up old urbs and devices */ usb_set_device_state (hcd->self.root_hub, USB_STATE_NOTATTACHED); usb_kick_khubd (hcd->self.root_hub); } + if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) { + hcd = hcd->shared_hcd; + if (hcd->rh_registered) { + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + + /* make khubd clean up old urbs and devices */ + usb_set_device_state(hcd->self.root_hub, + USB_STATE_NOTATTACHED); + usb_kick_khubd(hcd->self.root_hub); + } + } spin_unlock_irqrestore (&hcd_root_hub_lock, flags); + /* Make sure that the other roothub is also deallocated. */ } EXPORT_SYMBOL_GPL (usb_hc_died); /*-------------------------------------------------------------------------*/ -static void hcd_release (struct usb_bus *bus) +static void init_giveback_urb_bh(struct giveback_urb_bh *bh) { - struct usb_hcd *hcd; - hcd = container_of(bus, struct usb_hcd, self); - kfree(hcd); + spin_lock_init(&bh->lock); + INIT_LIST_HEAD(&bh->head); + tasklet_init(&bh->bh, usb_giveback_urb_bh, (unsigned long)bh); } /** - * usb_create_hcd - create and initialize an HCD structure + * usb_create_shared_hcd - create and initialize an HCD structure * @driver: HC driver that will use this hcd * @dev: device for this HC, stored in hcd->self.controller * @bus_name: value to store in hcd->self.bus_name + * @primary_hcd: a pointer to the usb_hcd structure that is sharing the + * PCI device. Only allocate certain resources for the primary HCD * Context: !in_interrupt() * * Allocate a struct usb_hcd, with extra space at the end for the * HC driver's private data. Initialize the generic members of the * hcd structure. * - * If memory is unavailable, returns NULL. + * Return: On success, a pointer to the created and initialized HCD structure. + * On failure (e.g. if memory is unavailable), %NULL. */ -struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, - struct device *dev, char *bus_name) +struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, + struct device *dev, const char *bus_name, + struct usb_hcd *primary_hcd) { struct usb_hcd *hcd; @@ -1727,150 +2445,361 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, dev_dbg (dev, "hcd alloc failed\n"); return NULL; } - dev_set_drvdata(dev, hcd); + if (primary_hcd == NULL) { + hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex), + GFP_KERNEL); + if (!hcd->bandwidth_mutex) { + kfree(hcd); + dev_dbg(dev, "hcd bandwidth mutex alloc failed\n"); + return NULL; + } + mutex_init(hcd->bandwidth_mutex); + dev_set_drvdata(dev, hcd); + } else { + mutex_lock(&usb_port_peer_mutex); + hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex; + hcd->primary_hcd = primary_hcd; + primary_hcd->primary_hcd = primary_hcd; + hcd->shared_hcd = primary_hcd; + primary_hcd->shared_hcd = hcd; + mutex_unlock(&usb_port_peer_mutex); + } + + kref_init(&hcd->kref); usb_bus_init(&hcd->self); - hcd->self.op = &usb_hcd_operations; - hcd->self.hcpriv = hcd; - hcd->self.release = &hcd_release; hcd->self.controller = dev; hcd->self.bus_name = bus_name; + hcd->self.uses_dma = (dev->dma_mask != NULL); init_timer(&hcd->rh_timer); hcd->rh_timer.function = rh_timer_func; hcd->rh_timer.data = (unsigned long) hcd; +#ifdef CONFIG_PM_RUNTIME + INIT_WORK(&hcd->wakeup_work, hcd_resume_work); +#endif hcd->driver = driver; + hcd->speed = driver->flags & HCD_MASK; hcd->product_desc = (driver->product_desc) ? driver->product_desc : "USB Host Controller"; - return hcd; } -EXPORT_SYMBOL (usb_create_hcd); +EXPORT_SYMBOL_GPL(usb_create_shared_hcd); -void usb_put_hcd (struct usb_hcd *hcd) +/** + * usb_create_hcd - create and initialize an HCD structure + * @driver: HC driver that will use this hcd + * @dev: device for this HC, stored in hcd->self.controller + * @bus_name: value to store in hcd->self.bus_name + * Context: !in_interrupt() + * + * Allocate a struct usb_hcd, with extra space at the end for the + * HC driver's private data. Initialize the generic members of the + * hcd structure. + * + * Return: On success, a pointer to the created and initialized HCD + * structure. On failure (e.g. if memory is unavailable), %NULL. + */ +struct usb_hcd *usb_create_hcd(const struct hc_driver *driver, + struct device *dev, const char *bus_name) { - dev_set_drvdata(hcd->self.controller, NULL); - usb_bus_put(&hcd->self); + return usb_create_shared_hcd(driver, dev, bus_name, NULL); } -EXPORT_SYMBOL (usb_put_hcd); +EXPORT_SYMBOL_GPL(usb_create_hcd); -/** - * usb_add_hcd - finish generic HCD structure initialization and register - * @hcd: the usb_hcd structure to initialize - * @irqnum: Interrupt line to allocate - * @irqflags: Interrupt type flags +/* + * Roothubs that share one PCI device must also share the bandwidth mutex. + * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is + * deallocated. * - * Finish the remaining parts of generic HCD initialization: allocate the - * buffers of consistent memory, register the bus, request the IRQ line, - * and call the driver's reset() and start() routines. + * Make sure to only deallocate the bandwidth_mutex when the primary HCD is + * freed. When hcd_release() is called for either hcd in a peer set + * invalidate the peer's ->shared_hcd and ->primary_hcd pointers to + * block new peering attempts */ -int usb_add_hcd(struct usb_hcd *hcd, - unsigned int irqnum, unsigned long irqflags) +static void hcd_release(struct kref *kref) { - int retval; - struct usb_device *rhdev; + struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref); - dev_info(hcd->self.controller, "%s\n", hcd->product_desc); + mutex_lock(&usb_port_peer_mutex); + if (usb_hcd_is_primary_hcd(hcd)) + kfree(hcd->bandwidth_mutex); + if (hcd->shared_hcd) { + struct usb_hcd *peer = hcd->shared_hcd; - /* till now HC has been in an indeterminate state ... */ - if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) { - dev_err(hcd->self.controller, "can't reset\n"); - return retval; + peer->shared_hcd = NULL; + if (peer->primary_hcd == hcd) + peer->primary_hcd = NULL; } + mutex_unlock(&usb_port_peer_mutex); + kfree(hcd); +} - if ((retval = hcd_buffer_create(hcd)) != 0) { - dev_dbg(hcd->self.controller, "pool alloc failed\n"); - return retval; - } +struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd) +{ + if (hcd) + kref_get (&hcd->kref); + return hcd; +} +EXPORT_SYMBOL_GPL(usb_get_hcd); - if ((retval = usb_register_bus(&hcd->self)) < 0) - goto err_register_bus; +void usb_put_hcd (struct usb_hcd *hcd) +{ + if (hcd) + kref_put (&hcd->kref, hcd_release); +} +EXPORT_SYMBOL_GPL(usb_put_hcd); - if (hcd->driver->irq) { - char buf[8], *bufp = buf; +int usb_hcd_is_primary_hcd(struct usb_hcd *hcd) +{ + if (!hcd->primary_hcd) + return 1; + return hcd == hcd->primary_hcd; +} +EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd); -#ifdef __sparc__ - bufp = __irq_itoa(irqnum); -#else - sprintf(buf, "%d", irqnum); -#endif +int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1) +{ + if (!hcd->driver->find_raw_port_number) + return port1; + + return hcd->driver->find_raw_port_number(hcd, port1); +} + +static int usb_hcd_request_irqs(struct usb_hcd *hcd, + unsigned int irqnum, unsigned long irqflags) +{ + int retval; + + if (hcd->driver->irq) { snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); - if ((retval = request_irq(irqnum, &usb_hcd_irq, irqflags, - hcd->irq_descr, hcd)) != 0) { + retval = request_irq(irqnum, &usb_hcd_irq, irqflags, + hcd->irq_descr, hcd); + if (retval != 0) { dev_err(hcd->self.controller, - "request interrupt %s failed\n", bufp); - goto err_request_irq; + "request interrupt %d failed\n", + irqnum); + return retval; } hcd->irq = irqnum; - dev_info(hcd->self.controller, "irq %s, %s 0x%08llx\n", bufp, + dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum, (hcd->driver->flags & HCD_MEMORY) ? "io mem" : "io base", (unsigned long long)hcd->rsrc_start); } else { - hcd->irq = -1; + hcd->irq = 0; if (hcd->rsrc_start) dev_info(hcd->self.controller, "%s 0x%08llx\n", (hcd->driver->flags & HCD_MEMORY) ? "io mem" : "io base", (unsigned long long)hcd->rsrc_start); } + return 0; +} + +/* + * Before we free this root hub, flush in-flight peering attempts + * and disable peer lookups + */ +static void usb_put_invalidate_rhdev(struct usb_hcd *hcd) +{ + struct usb_device *rhdev; - /* Allocate the root hub before calling hcd->driver->start(), - * but don't register it until afterward so that the hardware - * is running. + mutex_lock(&usb_port_peer_mutex); + rhdev = hcd->self.root_hub; + hcd->self.root_hub = NULL; + mutex_unlock(&usb_port_peer_mutex); + usb_put_dev(rhdev); +} + +/** + * usb_add_hcd - finish generic HCD structure initialization and register + * @hcd: the usb_hcd structure to initialize + * @irqnum: Interrupt line to allocate + * @irqflags: Interrupt type flags + * + * Finish the remaining parts of generic HCD initialization: allocate the + * buffers of consistent memory, register the bus, request the IRQ line, + * and call the driver's reset() and start() routines. + */ +int usb_add_hcd(struct usb_hcd *hcd, + unsigned int irqnum, unsigned long irqflags) +{ + int retval; + struct usb_device *rhdev; + + if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->phy) { + struct usb_phy *phy = usb_get_phy_dev(hcd->self.controller, 0); + + if (IS_ERR(phy)) { + retval = PTR_ERR(phy); + if (retval == -EPROBE_DEFER) + return retval; + } else { + retval = usb_phy_init(phy); + if (retval) { + usb_put_phy(phy); + return retval; + } + hcd->phy = phy; + hcd->remove_phy = 1; + } + } + + dev_info(hcd->self.controller, "%s\n", hcd->product_desc); + + /* Keep old behaviour if authorized_default is not in [0, 1]. */ + if (authorized_default < 0 || authorized_default > 1) + hcd->authorized_default = hcd->wireless ? 0 : 1; + else + hcd->authorized_default = authorized_default; + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + /* HC is in reset state, but accessible. Now do the one-time init, + * bottom up so that hcds can customize the root hubs before khubd + * starts talking to them. (Note, bus id is assigned early too.) */ + if ((retval = hcd_buffer_create(hcd)) != 0) { + dev_dbg(hcd->self.controller, "pool alloc failed\n"); + goto err_remove_phy; + } + + if ((retval = usb_register_bus(&hcd->self)) < 0) + goto err_register_bus; + if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) { dev_err(hcd->self.controller, "unable to allocate root hub\n"); retval = -ENOMEM; goto err_allocate_root_hub; } - rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH : - USB_SPEED_FULL; + mutex_lock(&usb_port_peer_mutex); + hcd->self.root_hub = rhdev; + mutex_unlock(&usb_port_peer_mutex); - /* Although in principle hcd->driver->start() might need to use rhdev, - * none of the current drivers do. - */ - if ((retval = hcd->driver->start(hcd)) < 0) { - dev_err(hcd->self.controller, "startup error %d\n", retval); - goto err_hcd_driver_start; + switch (hcd->speed) { + case HCD_USB11: + rhdev->speed = USB_SPEED_FULL; + break; + case HCD_USB2: + rhdev->speed = USB_SPEED_HIGH; + break; + case HCD_USB25: + rhdev->speed = USB_SPEED_WIRELESS; + break; + case HCD_USB3: + rhdev->speed = USB_SPEED_SUPER; + break; + default: + retval = -EINVAL; + goto err_set_rh_speed; } - /* hcd->driver->start() reported can_wakeup, probably with - * assistance from board's boot firmware. - * NOTE: normal devices won't enable wakeup by default. + /* wakeup flag init defaults to "everything works" for root hubs, + * but drivers can override it in reset() if needed, along with + * recording the overall controller's system wakeup capability. + */ + device_set_wakeup_capable(&rhdev->dev, 1); + + /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is + * registered. But since the controller can die at any time, + * let's initialize the flag before touching the hardware. + */ + set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + + /* "reset" is misnamed; its role is now one-time init. the controller + * should already have been reset (and boot firmware kicked off etc). */ - if (hcd->can_wakeup) + if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) { + dev_err(hcd->self.controller, "can't setup: %d\n", retval); + goto err_hcd_driver_setup; + } + hcd->rh_pollable = 1; + + /* NOTE: root hub and controller capabilities may not be the same */ + if (device_can_wakeup(hcd->self.controller) + && device_can_wakeup(&hcd->self.root_hub->dev)) dev_dbg(hcd->self.controller, "supports USB remote wakeup\n"); - hcd->remote_wakeup = hcd->can_wakeup; - if ((retval = register_root_hub(rhdev, hcd)) != 0) + /* initialize tasklets */ + init_giveback_urb_bh(&hcd->high_prio_bh); + init_giveback_urb_bh(&hcd->low_prio_bh); + + /* enable irqs just before we start the controller, + * if the BIOS provides legacy PCI irqs. + */ + if (usb_hcd_is_primary_hcd(hcd) && irqnum) { + retval = usb_hcd_request_irqs(hcd, irqnum, irqflags); + if (retval) + goto err_request_irq; + } + + hcd->state = HC_STATE_RUNNING; + retval = hcd->driver->start(hcd); + if (retval < 0) { + dev_err(hcd->self.controller, "startup error %d\n", retval); + goto err_hcd_driver_start; + } + + /* starting here, usbcore will pay attention to this root hub */ + if ((retval = register_root_hub(hcd)) != 0) goto err_register_root_hub; - if (hcd->uses_new_polling && hcd->poll_rh) + retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group); + if (retval < 0) { + printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n", + retval); + goto error_create_attr_group; + } + if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) usb_hcd_poll_rh_status(hcd); - return retval; - err_register_root_hub: - hcd->driver->stop(hcd); + return retval; - err_hcd_driver_start: - usb_put_dev(rhdev); +error_create_attr_group: + clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + if (HC_IS_RUNNING(hcd->state)) + hcd->state = HC_STATE_QUIESCING; + spin_lock_irq(&hcd_root_hub_lock); + hcd->rh_registered = 0; + spin_unlock_irq(&hcd_root_hub_lock); - err_allocate_root_hub: - if (hcd->irq >= 0) +#ifdef CONFIG_PM_RUNTIME + cancel_work_sync(&hcd->wakeup_work); +#endif + mutex_lock(&usb_bus_list_lock); + usb_disconnect(&rhdev); /* Sets rhdev to NULL */ + mutex_unlock(&usb_bus_list_lock); +err_register_root_hub: + hcd->rh_pollable = 0; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + hcd->driver->stop(hcd); + hcd->state = HC_STATE_HALT; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); +err_hcd_driver_start: + if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0) free_irq(irqnum, hcd); - - err_request_irq: +err_request_irq: +err_hcd_driver_setup: +err_set_rh_speed: + usb_put_invalidate_rhdev(hcd); +err_allocate_root_hub: usb_deregister_bus(&hcd->self); - - err_register_bus: +err_register_bus: hcd_buffer_destroy(hcd); +err_remove_phy: + if (hcd->remove_phy && hcd->phy) { + usb_phy_shutdown(hcd->phy); + usb_put_phy(hcd->phy); + hcd->phy = NULL; + } return retval; -} -EXPORT_SYMBOL (usb_add_hcd); +} +EXPORT_SYMBOL_GPL(usb_add_hcd); /** * usb_remove_hcd - shutdown processing for generic HCDs @@ -1882,8 +2811,14 @@ EXPORT_SYMBOL (usb_add_hcd); */ void usb_remove_hcd(struct usb_hcd *hcd) { + struct usb_device *rhdev = hcd->self.root_hub; + dev_info(hcd->self.controller, "remove, state %x\n", hcd->state); + usb_get_dev(rhdev); + sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group); + + clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); if (HC_IS_RUNNING (hcd->state)) hcd->state = HC_STATE_QUIESCING; @@ -1891,24 +2826,71 @@ void usb_remove_hcd(struct usb_hcd *hcd) spin_lock_irq (&hcd_root_hub_lock); hcd->rh_registered = 0; spin_unlock_irq (&hcd_root_hub_lock); - usb_disconnect(&hcd->self.root_hub); - hcd->poll_rh = 0; +#ifdef CONFIG_PM_RUNTIME + cancel_work_sync(&hcd->wakeup_work); +#endif + + mutex_lock(&usb_bus_list_lock); + usb_disconnect(&rhdev); /* Sets rhdev to NULL */ + mutex_unlock(&usb_bus_list_lock); + + /* + * tasklet_kill() isn't needed here because: + * - driver's disconnect() called from usb_disconnect() should + * make sure its URBs are completed during the disconnect() + * callback + * + * - it is too late to run complete() here since driver may have + * been removed already now + */ + + /* Prevent any more root-hub status calls from the timer. + * The HCD might still restart the timer (if a port status change + * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke + * the hub_status_data() callback. + */ + hcd->rh_pollable = 0; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); del_timer_sync(&hcd->rh_timer); hcd->driver->stop(hcd); hcd->state = HC_STATE_HALT; - if (hcd->irq >= 0) - free_irq(hcd->irq, hcd); + /* In case the HCD restarted the timer, stop it again. */ + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + + if (usb_hcd_is_primary_hcd(hcd)) { + if (hcd->irq > 0) + free_irq(hcd->irq, hcd); + } + usb_deregister_bus(&hcd->self); hcd_buffer_destroy(hcd); + if (hcd->remove_phy && hcd->phy) { + usb_phy_shutdown(hcd->phy); + usb_put_phy(hcd->phy); + hcd->phy = NULL; + } + + usb_put_invalidate_rhdev(hcd); +} +EXPORT_SYMBOL_GPL(usb_remove_hcd); + +void +usb_hcd_platform_shutdown(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + if (hcd->driver->shutdown) + hcd->driver->shutdown(hcd); } -EXPORT_SYMBOL (usb_remove_hcd); +EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown); /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_USB_MON) +#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) struct usb_mon_operations *mon_ops; @@ -1919,7 +2901,7 @@ struct usb_mon_operations *mon_ops; * Notice that the code is minimally error-proof. Because usbmon needs * symbols from usbcore, usbcore gets referenced and cannot be unloaded first. */ - + int usb_mon_register (struct usb_mon_operations *ops) { @@ -1944,4 +2926,4 @@ void usb_mon_deregister (void) } EXPORT_SYMBOL_GPL (usb_mon_deregister); -#endif /* CONFIG_USB_MON */ +#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */ |