diff options
Diffstat (limited to 'drivers/usb/core/hcd.c')
| -rw-r--r-- | drivers/usb/core/hcd.c | 496 |
1 files changed, 347 insertions, 149 deletions
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index d53547d2e4c..bec31e2efb8 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -6,7 +6,7 @@ * (C) Copyright Deti Fliegl 1999 * (C) Copyright Randy Dunlap 2000 * (C) Copyright David Brownell 2000-2002 - * + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -40,9 +40,11 @@ #include <linux/platform_device.h> #include <linux/workqueue.h> #include <linux/pm_runtime.h> +#include <linux/types.h> #include <linux/usb.h> #include <linux/usb/hcd.h> +#include <linux/usb/phy.h> #include "usb.h" @@ -92,10 +94,7 @@ EXPORT_SYMBOL_GPL (usb_bus_list); /* used when allocating bus numbers */ #define USB_MAXBUS 64 -struct usb_busmap { - unsigned long busmap [USB_MAXBUS / (8*sizeof (unsigned long))]; -}; -static struct usb_busmap busmap; +static DECLARE_BITMAP(busmap, USB_MAXBUS); /* used when updating list of hcds */ DEFINE_MUTEX(usb_bus_list_lock); /* exported only for usbfs */ @@ -149,8 +148,29 @@ static const u8 usb3_rh_dev_descriptor[18] = { 0x01 /* __u8 bNumConfigurations; */ }; +/* usb 2.5 (wireless USB 1.0) root hub device descriptor */ +static const u8 usb25_rh_dev_descriptor[18] = { + 0x12, /* __u8 bLength; */ + 0x01, /* __u8 bDescriptorType; Device */ + 0x50, 0x02, /* __le16 bcdUSB; v2.5 */ + + 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ + 0x00, /* __u8 bDeviceSubClass; */ + 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */ + 0xFF, /* __u8 bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */ + + 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ + 0x02, 0x00, /* __le16 idProduct; device 0x0002 */ + KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */ + + 0x03, /* __u8 iManufacturer; */ + 0x02, /* __u8 iProduct; */ + 0x01, /* __u8 iSerialNumber; */ + 0x01 /* __u8 bNumConfigurations; */ +}; + /* usb 2.0 root hub device descriptor */ -static const u8 usb2_rh_dev_descriptor [18] = { +static const u8 usb2_rh_dev_descriptor[18] = { 0x12, /* __u8 bLength; */ 0x01, /* __u8 bDescriptorType; Device */ 0x00, 0x02, /* __le16 bcdUSB; v2.0 */ @@ -173,7 +193,7 @@ static const u8 usb2_rh_dev_descriptor [18] = { /* no usb 2.0 root hub "device qualifier" descriptor: one speed only */ /* usb 1.1 root hub device descriptor */ -static const u8 usb11_rh_dev_descriptor [18] = { +static const u8 usb11_rh_dev_descriptor[18] = { 0x12, /* __u8 bLength; */ 0x01, /* __u8 bDescriptorType; Device */ 0x10, 0x01, /* __le16 bcdUSB; v1.1 */ @@ -198,7 +218,7 @@ static const u8 usb11_rh_dev_descriptor [18] = { /* Configuration descriptors for our root hubs */ -static const u8 fs_rh_config_descriptor [] = { +static const u8 fs_rh_config_descriptor[] = { /* one configuration */ 0x09, /* __u8 bLength; */ @@ -207,13 +227,13 @@ static const u8 fs_rh_config_descriptor [] = { 0x01, /* __u8 bNumInterfaces; (1) */ 0x01, /* __u8 bConfigurationValue; */ 0x00, /* __u8 iConfiguration; */ - 0xc0, /* __u8 bmAttributes; + 0xc0, /* __u8 bmAttributes; Bit 7: must be set, 6: Self-powered, 5: Remote wakeup, 4..0: resvd */ 0x00, /* __u8 MaxPower; */ - + /* USB 1.1: * USB 2.0, single TT organization (mandatory): * one interface, protocol 0 @@ -235,17 +255,17 @@ static const u8 fs_rh_config_descriptor [] = { 0x00, /* __u8 if_bInterfaceSubClass; */ 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */ 0x00, /* __u8 if_iInterface; */ - + /* one endpoint (status change endpoint) */ 0x07, /* __u8 ep_bLength; */ 0x05, /* __u8 ep_bDescriptorType; Endpoint */ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ + 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */ 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */ }; -static const u8 hs_rh_config_descriptor [] = { +static const u8 hs_rh_config_descriptor[] = { /* one configuration */ 0x09, /* __u8 bLength; */ @@ -254,13 +274,13 @@ static const u8 hs_rh_config_descriptor [] = { 0x01, /* __u8 bNumInterfaces; (1) */ 0x01, /* __u8 bConfigurationValue; */ 0x00, /* __u8 iConfiguration; */ - 0xc0, /* __u8 bmAttributes; + 0xc0, /* __u8 bmAttributes; Bit 7: must be set, 6: Self-powered, 5: Remote wakeup, 4..0: resvd */ 0x00, /* __u8 MaxPower; */ - + /* USB 1.1: * USB 2.0, single TT organization (mandatory): * one interface, protocol 0 @@ -282,12 +302,12 @@ static const u8 hs_rh_config_descriptor [] = { 0x00, /* __u8 if_bInterfaceSubClass; */ 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */ 0x00, /* __u8 if_iInterface; */ - + /* one endpoint (status change endpoint) */ 0x07, /* __u8 ep_bLength; */ 0x05, /* __u8 ep_bDescriptorType; Endpoint */ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ + 0x03, /* __u8 ep_bmAttributes; Interrupt */ /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) * see hub.c:hub_configure() for details. */ (USB_MAXCHILDREN + 1 + 7) / 8, 0x00, @@ -357,9 +377,10 @@ MODULE_PARM_DESC(authorized_default, * @buf: Buffer for USB string descriptor (header + UTF-16LE) * @len: Length (in bytes; may be odd) of descriptor buffer. * - * The return value is the number of bytes filled in: 2 + 2*strlen(s) or - * buflen, whichever is less. + * Return: The number of bytes filled in: 2 + 2*strlen(s) or @len, + * whichever is less. * + * Note: * USB String descriptors can contain at most 126 characters; input * strings longer than that are truncated. */ @@ -395,7 +416,8 @@ ascii2desc(char const *s, u8 *buf, unsigned len) * * Produces either a manufacturer, product or serial number string for the * virtual root hub device. - * Returns the number of bytes filled in: the length of the descriptor or + * + * Return: The number of bytes filled in: the length of the descriptor or * of the provided buffer, whichever is less. */ static unsigned @@ -405,7 +427,7 @@ rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len) char const *s; static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04}; - // language ids + /* language ids */ switch (id) { case 0: /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */ @@ -441,19 +463,15 @@ rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len) static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) { struct usb_ctrlrequest *cmd; - u16 typeReq, wValue, wIndex, wLength; + u16 typeReq, wValue, wIndex, wLength; u8 *ubuf = urb->transfer_buffer; - /* - * tbuf should be as big as the BOS descriptor and - * the USB hub descriptor. - */ - u8 tbuf[USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE] - __attribute__((aligned(4))); - const u8 *bufp = tbuf; unsigned len = 0; int status; u8 patch_wakeup = 0; u8 patch_protocol = 0; + u16 tbuf_size; + u8 *tbuf = NULL; + const u8 *bufp; might_sleep(); @@ -473,6 +491,18 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) if (wLength > urb->transfer_buffer_length) goto error; + /* + * tbuf should be at least as big as the + * USB hub descriptor. + */ + tbuf_size = max_t(u16, sizeof(struct usb_hub_descriptor), wLength); + tbuf = kzalloc(tbuf_size, GFP_KERNEL); + if (!tbuf) + return -ENOMEM; + + bufp = tbuf; + + urb->actual_length = 0; switch (typeReq) { @@ -495,10 +525,10 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) */ case DeviceRequest | USB_REQ_GET_STATUS: - tbuf [0] = (device_may_wakeup(&hcd->self.root_hub->dev) + tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev) << USB_DEVICE_REMOTE_WAKEUP) | (1 << USB_DEVICE_SELF_POWERED); - tbuf [1] = 0; + tbuf[1] = 0; len = 2; break; case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: @@ -515,7 +545,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) goto error; break; case DeviceRequest | USB_REQ_GET_CONFIGURATION: - tbuf [0] = 1; + tbuf[0] = 1; len = 1; /* FALLTHROUGH */ case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: @@ -527,6 +557,9 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) case HCD_USB3: bufp = usb3_rh_dev_descriptor; break; + case HCD_USB25: + bufp = usb25_rh_dev_descriptor; + break; case HCD_USB2: bufp = usb2_rh_dev_descriptor; break; @@ -546,6 +579,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) bufp = ss_rh_config_descriptor; len = sizeof ss_rh_config_descriptor; break; + case HCD_USB25: case HCD_USB2: bufp = hs_rh_config_descriptor; len = sizeof hs_rh_config_descriptor; @@ -574,13 +608,13 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) } break; case DeviceRequest | USB_REQ_GET_INTERFACE: - tbuf [0] = 0; + tbuf[0] = 0; len = 1; /* FALLTHROUGH */ case DeviceOutRequest | USB_REQ_SET_INTERFACE: break; case DeviceOutRequest | USB_REQ_SET_ADDRESS: - // wValue == urb->dev->devaddr + /* wValue == urb->dev->devaddr */ dev_dbg (hcd->self.controller, "root hub device address %d\n", wValue); break; @@ -590,9 +624,9 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) /* ENDPOINT REQUESTS */ case EndpointRequest | USB_REQ_GET_STATUS: - // ENDPOINT_HALT flag - tbuf [0] = 0; - tbuf [1] = 0; + /* ENDPOINT_HALT flag */ + tbuf[0] = 0; + tbuf[1] = 0; len = 2; /* FALLTHROUGH */ case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: @@ -648,7 +682,7 @@ error: if (urb->transfer_buffer_length < len) len = urb->transfer_buffer_length; urb->actual_length = len; - // always USB_DIR_IN, toward host + /* always USB_DIR_IN, toward host */ memcpy (ubuf, bufp, len); /* report whether RH hardware supports remote wakeup */ @@ -666,18 +700,12 @@ error: bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT; } + kfree(tbuf); + /* any errors get returned through the urb completion */ spin_lock_irq(&hcd_root_hub_lock); usb_hcd_unlink_urb_from_ep(hcd, urb); - - /* This peculiar use of spinlocks echoes what real HC drivers do. - * Avoiding calls to local_irq_disable/enable makes the code - * RT-friendly. - */ - spin_unlock(&hcd_root_hub_lock); usb_hcd_giveback_urb(hcd, urb, status); - spin_lock(&hcd_root_hub_lock); - spin_unlock_irq(&hcd_root_hub_lock); return 0; } @@ -717,9 +745,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) memcpy(urb->transfer_buffer, buffer, length); usb_hcd_unlink_urb_from_ep(hcd, urb); - spin_unlock(&hcd_root_hub_lock); usb_hcd_giveback_urb(hcd, urb, 0); - spin_lock(&hcd_root_hub_lock); } else { length = 0; set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags); @@ -809,10 +835,7 @@ static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) if (urb == hcd->status_urb) { hcd->status_urb = NULL; usb_hcd_unlink_urb_from_ep(hcd, urb); - - spin_unlock(&hcd_root_hub_lock); usb_hcd_giveback_urb(hcd, urb, status); - spin_lock(&hcd_root_hub_lock); } } done: @@ -825,9 +848,8 @@ static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) /* * Show & store the current value of authorized_default */ -static ssize_t usb_host_authorized_default_show(struct device *dev, - struct device_attribute *attr, - char *buf) +static ssize_t authorized_default_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct usb_device *rh_usb_dev = to_usb_device(dev); struct usb_bus *usb_bus = rh_usb_dev->bus; @@ -839,9 +861,9 @@ static ssize_t usb_host_authorized_default_show(struct device *dev, return snprintf(buf, PAGE_SIZE, "%u\n", usb_hcd->authorized_default); } -static ssize_t usb_host_authorized_default_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) +static ssize_t authorized_default_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) { ssize_t result; unsigned val; @@ -854,18 +876,14 @@ static ssize_t usb_host_authorized_default_store(struct device *dev, usb_hcd = bus_to_hcd(usb_bus); result = sscanf(buf, "%u\n", &val); if (result == 1) { - usb_hcd->authorized_default = val? 1 : 0; + usb_hcd->authorized_default = val ? 1 : 0; result = size; - } - else + } else { result = -EINVAL; + } return result; } - -static DEVICE_ATTR(authorized_default, 0644, - usb_host_authorized_default_show, - usb_host_authorized_default_store); - +static DEVICE_ATTR_RW(authorized_default); /* Group all the USB bus attributes */ static struct attribute *usb_bus_attrs[] = { @@ -900,6 +918,7 @@ static void usb_bus_init (struct usb_bus *bus) bus->bandwidth_allocated = 0; bus->bandwidth_int_reqs = 0; bus->bandwidth_isoc_reqs = 0; + mutex_init(&bus->usb_address0_mutex); INIT_LIST_HEAD (&bus->bus_list); } @@ -913,6 +932,8 @@ static void usb_bus_init (struct usb_bus *bus) * * Assigns a bus number, and links the controller into usbcore data * structures so that it can be seen by scanning the bus list. + * + * Return: 0 if successful. A negative error code otherwise. */ static int usb_register_bus(struct usb_bus *bus) { @@ -920,12 +941,12 @@ static int usb_register_bus(struct usb_bus *bus) int busnum; mutex_lock(&usb_bus_list_lock); - busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1); + busnum = find_next_zero_bit(busmap, USB_MAXBUS, 1); if (busnum >= USB_MAXBUS) { printk (KERN_ERR "%s: too many buses\n", usbcore_name); goto error_find_busnum; } - set_bit (busnum, busmap.busmap); + set_bit(busnum, busmap); bus->busnum = busnum; /* Add it to the local list of buses */ @@ -966,7 +987,7 @@ static void usb_deregister_bus (struct usb_bus *bus) usb_notify_remove_bus(bus); - clear_bit (bus->busnum, busmap.busmap); + clear_bit(bus->busnum, busmap); } /** @@ -977,6 +998,8 @@ static void usb_deregister_bus (struct usb_bus *bus) * the device properly in the device tree and then calls usb_new_device() * to register the usb device. It also assigns the root hub's USB address * (always 1). + * + * Return: 0 if successful. A negative error code otherwise. */ static int register_root_hub(struct usb_hcd *hcd) { @@ -1083,7 +1106,9 @@ EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume); * @isoc: true for isochronous transactions, false for interrupt ones * @bytecount: how many bytes in the transaction. * - * Returns approximate bus time in nanoseconds for a periodic transaction. + * Return: Approximate bus time in nanoseconds for a periodic transaction. + * + * Note: * See USB 2.0 spec section 5.11.3; only periodic transfers need to be * scheduled in software, this function is only used for such scheduling. */ @@ -1095,21 +1120,21 @@ long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount) case USB_SPEED_LOW: /* INTR only */ if (is_input) { tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L; - return (64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp); + return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp; } else { tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L; - return (64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp); + return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp; } case USB_SPEED_FULL: /* ISOC or INTR */ if (isoc) { tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L; - return (((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp); + return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp; } else { tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L; - return (9107L + BW_HOST_DELAY + tmp); + return 9107L + BW_HOST_DELAY + tmp; } case USB_SPEED_HIGH: /* ISOC or INTR */ - // FIXME adjust for input vs output + /* FIXME adjust for input vs output */ if (isoc) tmp = HS_NSECS_ISO (bytecount); else @@ -1141,7 +1166,7 @@ EXPORT_SYMBOL_GPL(usb_calc_bus_time); * be disabled. The actions carried out here are required for URB * submission, as well as for endpoint shutdown and for usb_kill_urb. * - * Returns 0 for no error, otherwise a negative error code (in which case + * Return: 0 for no error, otherwise a negative error code (in which case * the enqueue() method must fail). If no error occurs but enqueue() fails * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing * the private spinlock and returning. @@ -1196,7 +1221,7 @@ EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep); * be disabled. The actions carried out here are required for making * sure than an unlink is valid. * - * Returns 0 for no error, otherwise a negative error code (in which case + * Return: 0 for no error, otherwise a negative error code (in which case * the dequeue() method must fail). The possible error codes are: * * -EIDRM: @urb was not submitted or has already completed. @@ -1273,7 +1298,7 @@ EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep); * DMA framework is dma_declare_coherent_memory() * * - So we use that, even though the primary requirement - * is that the memory be "local" (hence addressible + * is that the memory be "local" (hence addressable * by that device), not "coherent". * */ @@ -1478,6 +1503,9 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, ret = -EAGAIN; else urb->transfer_flags |= URB_DMA_MAP_PAGE; + } else if (is_vmalloc_addr(urb->transfer_buffer)) { + WARN_ONCE(1, "transfer buffer not dma capable\n"); + ret = -EAGAIN; } else { urb->transfer_dma = dma_map_single( hcd->self.controller, @@ -1623,6 +1651,77 @@ int usb_hcd_unlink_urb (struct urb *urb, int status) /*-------------------------------------------------------------------------*/ +static void __usb_hcd_giveback_urb(struct urb *urb) +{ + struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus); + struct usb_anchor *anchor = urb->anchor; + int status = urb->unlinked; + unsigned long flags; + + urb->hcpriv = NULL; + if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) && + urb->actual_length < urb->transfer_buffer_length && + !status)) + status = -EREMOTEIO; + + unmap_urb_for_dma(hcd, urb); + usbmon_urb_complete(&hcd->self, urb, status); + usb_anchor_suspend_wakeups(anchor); + usb_unanchor_urb(urb); + + /* pass ownership to the completion handler */ + urb->status = status; + + /* + * We disable local IRQs here avoid possible deadlock because + * drivers may call spin_lock() to hold lock which might be + * acquired in one hard interrupt handler. + * + * The local_irq_save()/local_irq_restore() around complete() + * will be removed if current USB drivers have been cleaned up + * and no one may trigger the above deadlock situation when + * running complete() in tasklet. + */ + local_irq_save(flags); + urb->complete(urb); + local_irq_restore(flags); + + usb_anchor_resume_wakeups(anchor); + atomic_dec(&urb->use_count); + if (unlikely(atomic_read(&urb->reject))) + wake_up(&usb_kill_urb_queue); + usb_put_urb(urb); +} + +static void usb_giveback_urb_bh(unsigned long param) +{ + struct giveback_urb_bh *bh = (struct giveback_urb_bh *)param; + struct list_head local_list; + + spin_lock_irq(&bh->lock); + bh->running = true; + restart: + list_replace_init(&bh->head, &local_list); + spin_unlock_irq(&bh->lock); + + while (!list_empty(&local_list)) { + struct urb *urb; + + urb = list_entry(local_list.next, struct urb, urb_list); + list_del_init(&urb->urb_list); + bh->completing_ep = urb->ep; + __usb_hcd_giveback_urb(urb); + bh->completing_ep = NULL; + } + + /* check if there are new URBs to giveback */ + spin_lock_irq(&bh->lock); + if (!list_empty(&bh->head)) + goto restart; + bh->running = false; + spin_unlock_irq(&bh->lock); +} + /** * usb_hcd_giveback_urb - return URB from HCD to device driver * @hcd: host controller returning the URB @@ -1642,25 +1741,37 @@ int usb_hcd_unlink_urb (struct urb *urb, int status) */ void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status) { - urb->hcpriv = NULL; - if (unlikely(urb->unlinked)) - status = urb->unlinked; - else if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) && - urb->actual_length < urb->transfer_buffer_length && - !status)) - status = -EREMOTEIO; + struct giveback_urb_bh *bh; + bool running, high_prio_bh; - unmap_urb_for_dma(hcd, urb); - usbmon_urb_complete(&hcd->self, urb, status); - usb_unanchor_urb(urb); + /* pass status to tasklet via unlinked */ + if (likely(!urb->unlinked)) + urb->unlinked = status; - /* pass ownership to the completion handler */ - urb->status = status; - urb->complete (urb); - atomic_dec (&urb->use_count); - if (unlikely(atomic_read(&urb->reject))) - wake_up (&usb_kill_urb_queue); - usb_put_urb (urb); + if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) { + __usb_hcd_giveback_urb(urb); + return; + } + + if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) { + bh = &hcd->high_prio_bh; + high_prio_bh = true; + } else { + bh = &hcd->low_prio_bh; + high_prio_bh = false; + } + + spin_lock(&bh->lock); + list_add_tail(&urb->urb_list, &bh->head); + running = bh->running; + spin_unlock(&bh->lock); + + if (running) + ; + else if (high_prio_bh) + tasklet_hi_schedule(&bh->bh); + else + tasklet_schedule(&bh->bh); } EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb); @@ -1709,7 +1820,7 @@ rescan: case USB_ENDPOINT_XFER_INT: s = "-intr"; break; default: - s = "-iso"; break; + s = "-iso"; break; }; s; })); @@ -1759,7 +1870,7 @@ rescan: * pass in the current alternate interface setting in cur_alt, * and pass in the new alternate interface setting in new_alt. * - * Returns an error if the requested bandwidth change exceeds the + * Return: An error if the requested bandwidth change exceeds the * bus bandwidth or host controller internal resources. */ int usb_hcd_alloc_bandwidth(struct usb_device *udev, @@ -1929,9 +2040,12 @@ void usb_hcd_reset_endpoint(struct usb_device *udev, * @num_streams: number of streams to allocate. * @mem_flags: flags hcd should use to allocate memory. * - * Sets up a group of bulk endpoints to have num_streams stream IDs available. + * Sets up a group of bulk endpoints to have @num_streams stream IDs available. * Drivers may queue multiple transfers to different stream IDs, which may * complete in a different order than they were queued. + * + * Return: On success, the number of allocated streams. On failure, a negative + * error code. */ int usb_alloc_streams(struct usb_interface *interface, struct usb_host_endpoint **eps, unsigned int num_eps, @@ -1939,7 +2053,7 @@ int usb_alloc_streams(struct usb_interface *interface, { struct usb_hcd *hcd; struct usb_device *dev; - int i; + int i, ret; dev = interface_to_usbdev(interface); hcd = bus_to_hcd(dev->bus); @@ -1948,13 +2062,24 @@ int usb_alloc_streams(struct usb_interface *interface, if (dev->speed != USB_SPEED_SUPER) return -EINVAL; - /* Streams only apply to bulk endpoints. */ - for (i = 0; i < num_eps; i++) + for (i = 0; i < num_eps; i++) { + /* Streams only apply to bulk endpoints. */ if (!usb_endpoint_xfer_bulk(&eps[i]->desc)) return -EINVAL; + /* Re-alloc is not allowed */ + if (eps[i]->streams) + return -EINVAL; + } - return hcd->driver->alloc_streams(hcd, dev, eps, num_eps, + ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps, num_streams, mem_flags); + if (ret < 0) + return ret; + + for (i = 0; i < num_eps; i++) + eps[i]->streams = ret; + + return ret; } EXPORT_SYMBOL_GPL(usb_alloc_streams); @@ -1967,26 +2092,35 @@ EXPORT_SYMBOL_GPL(usb_alloc_streams); * * Reverts a group of bulk endpoints back to not using stream IDs. * Can fail if we are given bad arguments, or HCD is broken. + * + * Return: 0 on success. On failure, a negative error code. */ -void usb_free_streams(struct usb_interface *interface, +int usb_free_streams(struct usb_interface *interface, struct usb_host_endpoint **eps, unsigned int num_eps, gfp_t mem_flags) { struct usb_hcd *hcd; struct usb_device *dev; - int i; + int i, ret; dev = interface_to_usbdev(interface); hcd = bus_to_hcd(dev->bus); if (dev->speed != USB_SPEED_SUPER) - return; + return -EINVAL; - /* Streams only apply to bulk endpoints. */ + /* Double-free is not allowed */ for (i = 0; i < num_eps; i++) - if (!eps[i] || !usb_endpoint_xfer_bulk(&eps[i]->desc)) - return; + if (!eps[i] || !eps[i]->streams) + return -EINVAL; - hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags); + ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags); + if (ret < 0) + return ret; + + for (i = 0; i < num_eps; i++) + eps[i]->streams = 0; + + return ret; } EXPORT_SYMBOL_GPL(usb_free_streams); @@ -2133,13 +2267,11 @@ static void hcd_resume_work(struct work_struct *work) struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work); struct usb_device *udev = hcd->self.root_hub; - usb_lock_device(udev); usb_remote_wakeup(udev); - usb_unlock_device(udev); } /** - * usb_hcd_resume_root_hub - called by HCD to resume its root hub + * usb_hcd_resume_root_hub - called by HCD to resume its root hub * @hcd: host controller for this root hub * * The USB host controller calls this function when its root hub is @@ -2176,6 +2308,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); * khubd identifying and possibly configuring the device. * This is needed by OTG controller drivers, where it helps meet * HNP protocol timing requirements for starting a port reset. + * + * Return: 0 if successful. */ int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num) { @@ -2210,19 +2344,14 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum); * * If the controller isn't HALTed, calls the driver's irq handler. * Checks whether the controller is now dead. + * + * Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise. */ irqreturn_t usb_hcd_irq (int irq, void *__hcd) { struct usb_hcd *hcd = __hcd; - unsigned long flags; irqreturn_t rc; - /* IRQF_DISABLED doesn't work correctly with shared IRQs - * when the first handler doesn't use it. So let's just - * assume it's never used. - */ - local_irq_save(flags); - if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) rc = IRQ_NONE; else if (hcd->driver->irq(hcd) == IRQ_NONE) @@ -2230,7 +2359,6 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) else rc = IRQ_HANDLED; - local_irq_restore(flags); return rc; } EXPORT_SYMBOL_GPL(usb_hcd_irq); @@ -2282,6 +2410,14 @@ EXPORT_SYMBOL_GPL (usb_hc_died); /*-------------------------------------------------------------------------*/ +static void init_giveback_urb_bh(struct giveback_urb_bh *bh) +{ + + spin_lock_init(&bh->lock); + INIT_LIST_HEAD(&bh->head); + tasklet_init(&bh->bh, usb_giveback_urb_bh, (unsigned long)bh); +} + /** * usb_create_shared_hcd - create and initialize an HCD structure * @driver: HC driver that will use this hcd @@ -2295,7 +2431,8 @@ EXPORT_SYMBOL_GPL (usb_hc_died); * HC driver's private data. Initialize the generic members of the * hcd structure. * - * If memory is unavailable, returns NULL. + * Return: On success, a pointer to the created and initialized HCD structure. + * On failure (e.g. if memory is unavailable), %NULL. */ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, struct device *dev, const char *bus_name, @@ -2319,11 +2456,13 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, mutex_init(hcd->bandwidth_mutex); dev_set_drvdata(dev, hcd); } else { + mutex_lock(&usb_port_peer_mutex); hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex; hcd->primary_hcd = primary_hcd; primary_hcd->primary_hcd = primary_hcd; hcd->shared_hcd = primary_hcd; primary_hcd->shared_hcd = hcd; + mutex_unlock(&usb_port_peer_mutex); } kref_init(&hcd->kref); @@ -2359,7 +2498,8 @@ EXPORT_SYMBOL_GPL(usb_create_shared_hcd); * HC driver's private data. Initialize the generic members of the * hcd structure. * - * If memory is unavailable, returns NULL. + * Return: On success, a pointer to the created and initialized HCD + * structure. On failure (e.g. if memory is unavailable), %NULL. */ struct usb_hcd *usb_create_hcd(const struct hc_driver *driver, struct device *dev, const char *bus_name) @@ -2374,18 +2514,25 @@ EXPORT_SYMBOL_GPL(usb_create_hcd); * deallocated. * * Make sure to only deallocate the bandwidth_mutex when the primary HCD is - * freed. When hcd_release() is called for the non-primary HCD, set the - * primary_hcd's shared_hcd pointer to null (since the non-primary HCD will be - * freed shortly). + * freed. When hcd_release() is called for either hcd in a peer set + * invalidate the peer's ->shared_hcd and ->primary_hcd pointers to + * block new peering attempts */ -static void hcd_release (struct kref *kref) +static void hcd_release(struct kref *kref) { struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref); + mutex_lock(&usb_port_peer_mutex); if (usb_hcd_is_primary_hcd(hcd)) kfree(hcd->bandwidth_mutex); - else - hcd->shared_hcd->shared_hcd = NULL; + if (hcd->shared_hcd) { + struct usb_hcd *peer = hcd->shared_hcd; + + peer->shared_hcd = NULL; + if (peer->primary_hcd == hcd) + peer->primary_hcd = NULL; + } + mutex_unlock(&usb_port_peer_mutex); kfree(hcd); } @@ -2427,13 +2574,6 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd, if (hcd->driver->irq) { - /* IRQF_DISABLED doesn't work as advertised when used together - * with IRQF_SHARED. As usb_hcd_irq() will always disable - * interrupts we can remove it here. - */ - if (irqflags & IRQF_SHARED) - irqflags &= ~IRQF_DISABLED; - snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); retval = request_irq(irqnum, &usb_hcd_irq, irqflags, @@ -2460,6 +2600,21 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd, return 0; } +/* + * Before we free this root hub, flush in-flight peering attempts + * and disable peer lookups + */ +static void usb_put_invalidate_rhdev(struct usb_hcd *hcd) +{ + struct usb_device *rhdev; + + mutex_lock(&usb_port_peer_mutex); + rhdev = hcd->self.root_hub; + hcd->self.root_hub = NULL; + mutex_unlock(&usb_port_peer_mutex); + usb_put_dev(rhdev); +} + /** * usb_add_hcd - finish generic HCD structure initialization and register * @hcd: the usb_hcd structure to initialize @@ -2476,11 +2631,29 @@ int usb_add_hcd(struct usb_hcd *hcd, int retval; struct usb_device *rhdev; + if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->phy) { + struct usb_phy *phy = usb_get_phy_dev(hcd->self.controller, 0); + + if (IS_ERR(phy)) { + retval = PTR_ERR(phy); + if (retval == -EPROBE_DEFER) + return retval; + } else { + retval = usb_phy_init(phy); + if (retval) { + usb_put_phy(phy); + return retval; + } + hcd->phy = phy; + hcd->remove_phy = 1; + } + } + dev_info(hcd->self.controller, "%s\n", hcd->product_desc); /* Keep old behaviour if authorized_default is not in [0, 1]. */ if (authorized_default < 0 || authorized_default > 1) - hcd->authorized_default = hcd->wireless? 0 : 1; + hcd->authorized_default = hcd->wireless ? 0 : 1; else hcd->authorized_default = authorized_default; set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); @@ -2491,7 +2664,7 @@ int usb_add_hcd(struct usb_hcd *hcd, */ if ((retval = hcd_buffer_create(hcd)) != 0) { dev_dbg(hcd->self.controller, "pool alloc failed\n"); - return retval; + goto err_remove_phy; } if ((retval = usb_register_bus(&hcd->self)) < 0) @@ -2502,7 +2675,9 @@ int usb_add_hcd(struct usb_hcd *hcd, retval = -ENOMEM; goto err_allocate_root_hub; } + mutex_lock(&usb_port_peer_mutex); hcd->self.root_hub = rhdev; + mutex_unlock(&usb_port_peer_mutex); switch (hcd->speed) { case HCD_USB11: @@ -2511,6 +2686,9 @@ int usb_add_hcd(struct usb_hcd *hcd, case HCD_USB2: rhdev->speed = USB_SPEED_HIGH; break; + case HCD_USB25: + rhdev->speed = USB_SPEED_WIRELESS; + break; case HCD_USB3: rhdev->speed = USB_SPEED_SUPER; break; @@ -2535,7 +2713,7 @@ int usb_add_hcd(struct usb_hcd *hcd, * should already have been reset (and boot firmware kicked off etc). */ if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) { - dev_err(hcd->self.controller, "can't setup\n"); + dev_err(hcd->self.controller, "can't setup: %d\n", retval); goto err_hcd_driver_setup; } hcd->rh_pollable = 1; @@ -2545,6 +2723,10 @@ int usb_add_hcd(struct usb_hcd *hcd, && device_can_wakeup(&hcd->self.root_hub->dev)) dev_dbg(hcd->self.controller, "supports USB remote wakeup\n"); + /* initialize tasklets */ + init_giveback_urb_bh(&hcd->high_prio_bh); + init_giveback_urb_bh(&hcd->low_prio_bh); + /* enable irqs just before we start the controller, * if the BIOS provides legacy PCI irqs. */ @@ -2574,12 +2756,6 @@ int usb_add_hcd(struct usb_hcd *hcd, if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) usb_hcd_poll_rh_status(hcd); - /* - * Host controllers don't generate their own wakeup requests; - * they only forward requests from the root hub. Therefore - * controllers should always be enabled for remote wakeup. - */ - device_wakeup_enable(hcd->self.controller); return retval; error_create_attr_group: @@ -2610,13 +2786,19 @@ err_hcd_driver_start: err_request_irq: err_hcd_driver_setup: err_set_rh_speed: - usb_put_dev(hcd->self.root_hub); + usb_put_invalidate_rhdev(hcd); err_allocate_root_hub: usb_deregister_bus(&hcd->self); err_register_bus: hcd_buffer_destroy(hcd); +err_remove_phy: + if (hcd->remove_phy && hcd->phy) { + usb_phy_shutdown(hcd->phy); + usb_put_phy(hcd->phy); + hcd->phy = NULL; + } return retval; -} +} EXPORT_SYMBOL_GPL(usb_add_hcd); /** @@ -2653,6 +2835,16 @@ void usb_remove_hcd(struct usb_hcd *hcd) usb_disconnect(&rhdev); /* Sets rhdev to NULL */ mutex_unlock(&usb_bus_list_lock); + /* + * tasklet_kill() isn't needed here because: + * - driver's disconnect() called from usb_disconnect() should + * make sure its URBs are completed during the disconnect() + * callback + * + * - it is too late to run complete() here since driver may have + * been removed already now + */ + /* Prevent any more root-hub status calls from the timer. * The HCD might still restart the timer (if a port status change * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke @@ -2674,14 +2866,20 @@ void usb_remove_hcd(struct usb_hcd *hcd) free_irq(hcd->irq, hcd); } - usb_put_dev(hcd->self.root_hub); usb_deregister_bus(&hcd->self); hcd_buffer_destroy(hcd); + if (hcd->remove_phy && hcd->phy) { + usb_phy_shutdown(hcd->phy); + usb_put_phy(hcd->phy); + hcd->phy = NULL; + } + + usb_put_invalidate_rhdev(hcd); } EXPORT_SYMBOL_GPL(usb_remove_hcd); void -usb_hcd_platform_shutdown(struct platform_device* dev) +usb_hcd_platform_shutdown(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); @@ -2703,7 +2901,7 @@ struct usb_mon_operations *mon_ops; * Notice that the code is minimally error-proof. Because usbmon needs * symbols from usbcore, usbcore gets referenced and cannot be unloaded first. */ - + int usb_mon_register (struct usb_mon_operations *ops) { |