diff options
Diffstat (limited to 'drivers/usb/chipidea/udc.c')
| -rw-r--r-- | drivers/usb/chipidea/udc.c | 1897 | 
1 files changed, 1897 insertions, 0 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c new file mode 100644 index 00000000000..b8125aa64ad --- /dev/null +++ b/drivers/usb/chipidea/udc.c @@ -0,0 +1,1897 @@ +/* + * udc.c - ChipIdea UDC driver + * + * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. + * + * Author: David Lopo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dmapool.h> +#include <linux/err.h> +#include <linux/irqreturn.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/pm_runtime.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg-fsm.h> +#include <linux/usb/chipidea.h> + +#include "ci.h" +#include "udc.h" +#include "bits.h" +#include "debug.h" +#include "otg.h" +#include "otg_fsm.h" + +/* control endpoint description */ +static const struct usb_endpoint_descriptor +ctrl_endpt_out_desc = { +	.bLength         = USB_DT_ENDPOINT_SIZE, +	.bDescriptorType = USB_DT_ENDPOINT, + +	.bEndpointAddress = USB_DIR_OUT, +	.bmAttributes    = USB_ENDPOINT_XFER_CONTROL, +	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX), +}; + +static const struct usb_endpoint_descriptor +ctrl_endpt_in_desc = { +	.bLength         = USB_DT_ENDPOINT_SIZE, +	.bDescriptorType = USB_DT_ENDPOINT, + +	.bEndpointAddress = USB_DIR_IN, +	.bmAttributes    = USB_ENDPOINT_XFER_CONTROL, +	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX), +}; + +/** + * hw_ep_bit: calculates the bit number + * @num: endpoint number + * @dir: endpoint direction + * + * This function returns bit number + */ +static inline int hw_ep_bit(int num, int dir) +{ +	return num + (dir ? 16 : 0); +} + +static inline int ep_to_bit(struct ci_hdrc *ci, int n) +{ +	int fill = 16 - ci->hw_ep_max / 2; + +	if (n >= ci->hw_ep_max / 2) +		n += fill; + +	return n; +} + +/** + * hw_device_state: enables/disables interrupts (execute without interruption) + * @dma: 0 => disable, !0 => enable and set dma engine + * + * This function returns an error code + */ +static int hw_device_state(struct ci_hdrc *ci, u32 dma) +{ +	if (dma) { +		hw_write(ci, OP_ENDPTLISTADDR, ~0, dma); +		/* interrupt, error, port change, reset, sleep/suspend */ +		hw_write(ci, OP_USBINTR, ~0, +			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); +		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); +	} else { +		hw_write(ci, OP_USBINTR, ~0, 0); +		hw_write(ci, OP_USBCMD, USBCMD_RS, 0); +	} +	return 0; +} + +/** + * hw_ep_flush: flush endpoint fifo (execute without interruption) + * @num: endpoint number + * @dir: endpoint direction + * + * This function returns an error code + */ +static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir) +{ +	int n = hw_ep_bit(num, dir); + +	do { +		/* flush any pending transfer */ +		hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n)); +		while (hw_read(ci, OP_ENDPTFLUSH, BIT(n))) +			cpu_relax(); +	} while (hw_read(ci, OP_ENDPTSTAT, BIT(n))); + +	return 0; +} + +/** + * hw_ep_disable: disables endpoint (execute without interruption) + * @num: endpoint number + * @dir: endpoint direction + * + * This function returns an error code + */ +static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir) +{ +	hw_ep_flush(ci, num, dir); +	hw_write(ci, OP_ENDPTCTRL + num, +		 dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); +	return 0; +} + +/** + * hw_ep_enable: enables endpoint (execute without interruption) + * @num:  endpoint number + * @dir:  endpoint direction + * @type: endpoint type + * + * This function returns an error code + */ +static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type) +{ +	u32 mask, data; + +	if (dir) { +		mask  = ENDPTCTRL_TXT;  /* type    */ +		data  = type << __ffs(mask); + +		mask |= ENDPTCTRL_TXS;  /* unstall */ +		mask |= ENDPTCTRL_TXR;  /* reset data toggle */ +		data |= ENDPTCTRL_TXR; +		mask |= ENDPTCTRL_TXE;  /* enable  */ +		data |= ENDPTCTRL_TXE; +	} else { +		mask  = ENDPTCTRL_RXT;  /* type    */ +		data  = type << __ffs(mask); + +		mask |= ENDPTCTRL_RXS;  /* unstall */ +		mask |= ENDPTCTRL_RXR;  /* reset data toggle */ +		data |= ENDPTCTRL_RXR; +		mask |= ENDPTCTRL_RXE;  /* enable  */ +		data |= ENDPTCTRL_RXE; +	} +	hw_write(ci, OP_ENDPTCTRL + num, mask, data); +	return 0; +} + +/** + * hw_ep_get_halt: return endpoint halt status + * @num: endpoint number + * @dir: endpoint direction + * + * This function returns 1 if endpoint halted + */ +static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir) +{ +	u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; + +	return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0; +} + +/** + * hw_ep_prime: primes endpoint (execute without interruption) + * @num:     endpoint number + * @dir:     endpoint direction + * @is_ctrl: true if control endpoint + * + * This function returns an error code + */ +static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl) +{ +	int n = hw_ep_bit(num, dir); + +	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) +		return -EAGAIN; + +	hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n)); + +	while (hw_read(ci, OP_ENDPTPRIME, BIT(n))) +		cpu_relax(); +	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) +		return -EAGAIN; + +	/* status shoult be tested according with manual but it doesn't work */ +	return 0; +} + +/** + * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute + *                 without interruption) + * @num:   endpoint number + * @dir:   endpoint direction + * @value: true => stall, false => unstall + * + * This function returns an error code + */ +static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value) +{ +	if (value != 0 && value != 1) +		return -EINVAL; + +	do { +		enum ci_hw_regs reg = OP_ENDPTCTRL + num; +		u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; +		u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; + +		/* data toggle - reserved for EP0 but it's in ESS */ +		hw_write(ci, reg, mask_xs|mask_xr, +			  value ? mask_xs : mask_xr); +	} while (value != hw_ep_get_halt(ci, num, dir)); + +	return 0; +} + +/** + * hw_is_port_high_speed: test if port is high speed + * + * This function returns true if high speed port + */ +static int hw_port_is_high_speed(struct ci_hdrc *ci) +{ +	return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) : +		hw_read(ci, OP_PORTSC, PORTSC_HSP); +} + +/** + * hw_test_and_clear_complete: test & clear complete status (execute without + *                             interruption) + * @n: endpoint number + * + * This function returns complete status + */ +static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n) +{ +	n = ep_to_bit(ci, n); +	return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n)); +} + +/** + * hw_test_and_clear_intr_active: test & clear active interrupts (execute + *                                without interruption) + * + * This function returns active interrutps + */ +static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci) +{ +	u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci); + +	hw_write(ci, OP_USBSTS, ~0, reg); +	return reg; +} + +/** + * hw_test_and_clear_setup_guard: test & clear setup guard (execute without + *                                interruption) + * + * This function returns guard value + */ +static int hw_test_and_clear_setup_guard(struct ci_hdrc *ci) +{ +	return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0); +} + +/** + * hw_test_and_set_setup_guard: test & set setup guard (execute without + *                              interruption) + * + * This function returns guard value + */ +static int hw_test_and_set_setup_guard(struct ci_hdrc *ci) +{ +	return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW); +} + +/** + * hw_usb_set_address: configures USB address (execute without interruption) + * @value: new USB address + * + * This function explicitly sets the address, without the "USBADRA" (advance) + * feature, which is not supported by older versions of the controller. + */ +static void hw_usb_set_address(struct ci_hdrc *ci, u8 value) +{ +	hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR, +		 value << __ffs(DEVICEADDR_USBADR)); +} + +/** + * hw_usb_reset: restart device after a bus reset (execute without + *               interruption) + * + * This function returns an error code + */ +static int hw_usb_reset(struct ci_hdrc *ci) +{ +	hw_usb_set_address(ci, 0); + +	/* ESS flushes only at end?!? */ +	hw_write(ci, OP_ENDPTFLUSH,    ~0, ~0); + +	/* clear setup token semaphores */ +	hw_write(ci, OP_ENDPTSETUPSTAT, 0,  0); + +	/* clear complete status */ +	hw_write(ci, OP_ENDPTCOMPLETE,  0,  0); + +	/* wait until all bits cleared */ +	while (hw_read(ci, OP_ENDPTPRIME, ~0)) +		udelay(10);             /* not RTOS friendly */ + +	/* reset all endpoints ? */ + +	/* reset internal status and wait for further instructions +	   no need to verify the port reset status (ESS does it) */ + +	return 0; +} + +/****************************************************************************** + * UTIL block + *****************************************************************************/ + +static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq, +			  unsigned length) +{ +	int i; +	u32 temp; +	struct td_node *lastnode, *node = kzalloc(sizeof(struct td_node), +						  GFP_ATOMIC); + +	if (node == NULL) +		return -ENOMEM; + +	node->ptr = dma_pool_alloc(hwep->td_pool, GFP_ATOMIC, +				   &node->dma); +	if (node->ptr == NULL) { +		kfree(node); +		return -ENOMEM; +	} + +	memset(node->ptr, 0, sizeof(struct ci_hw_td)); +	node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES)); +	node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES); +	node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE); +	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) { +		u32 mul = hwreq->req.length / hwep->ep.maxpacket; + +		if (hwreq->req.length == 0 +				|| hwreq->req.length % hwep->ep.maxpacket) +			mul++; +		node->ptr->token |= mul << __ffs(TD_MULTO); +	} + +	temp = (u32) (hwreq->req.dma + hwreq->req.actual); +	if (length) { +		node->ptr->page[0] = cpu_to_le32(temp); +		for (i = 1; i < TD_PAGE_COUNT; i++) { +			u32 page = temp + i * CI_HDRC_PAGE_SIZE; +			page &= ~TD_RESERVED_MASK; +			node->ptr->page[i] = cpu_to_le32(page); +		} +	} + +	hwreq->req.actual += length; + +	if (!list_empty(&hwreq->tds)) { +		/* get the last entry */ +		lastnode = list_entry(hwreq->tds.prev, +				struct td_node, td); +		lastnode->ptr->next = cpu_to_le32(node->dma); +	} + +	INIT_LIST_HEAD(&node->td); +	list_add_tail(&node->td, &hwreq->tds); + +	return 0; +} + +/** + * _usb_addr: calculates endpoint address from direction & number + * @ep:  endpoint + */ +static inline u8 _usb_addr(struct ci_hw_ep *ep) +{ +	return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num; +} + +/** + * _hardware_queue: configures a request at hardware level + * @gadget: gadget + * @hwep:   endpoint + * + * This function returns an error code + */ +static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) +{ +	struct ci_hdrc *ci = hwep->ci; +	int ret = 0; +	unsigned rest = hwreq->req.length; +	int pages = TD_PAGE_COUNT; +	struct td_node *firstnode, *lastnode; + +	/* don't queue twice */ +	if (hwreq->req.status == -EALREADY) +		return -EALREADY; + +	hwreq->req.status = -EALREADY; + +	ret = usb_gadget_map_request(&ci->gadget, &hwreq->req, hwep->dir); +	if (ret) +		return ret; + +	/* +	 * The first buffer could be not page aligned. +	 * In that case we have to span into one extra td. +	 */ +	if (hwreq->req.dma % PAGE_SIZE) +		pages--; + +	if (rest == 0) +		add_td_to_list(hwep, hwreq, 0); + +	while (rest > 0) { +		unsigned count = min(hwreq->req.length - hwreq->req.actual, +					(unsigned)(pages * CI_HDRC_PAGE_SIZE)); +		add_td_to_list(hwep, hwreq, count); +		rest -= count; +	} + +	if (hwreq->req.zero && hwreq->req.length +	    && (hwreq->req.length % hwep->ep.maxpacket == 0)) +		add_td_to_list(hwep, hwreq, 0); + +	firstnode = list_first_entry(&hwreq->tds, struct td_node, td); + +	lastnode = list_entry(hwreq->tds.prev, +		struct td_node, td); + +	lastnode->ptr->next = cpu_to_le32(TD_TERMINATE); +	if (!hwreq->req.no_interrupt) +		lastnode->ptr->token |= cpu_to_le32(TD_IOC); +	wmb(); + +	hwreq->req.actual = 0; +	if (!list_empty(&hwep->qh.queue)) { +		struct ci_hw_req *hwreqprev; +		int n = hw_ep_bit(hwep->num, hwep->dir); +		int tmp_stat; +		struct td_node *prevlastnode; +		u32 next = firstnode->dma & TD_ADDR_MASK; + +		hwreqprev = list_entry(hwep->qh.queue.prev, +				struct ci_hw_req, queue); +		prevlastnode = list_entry(hwreqprev->tds.prev, +				struct td_node, td); + +		prevlastnode->ptr->next = cpu_to_le32(next); +		wmb(); +		if (hw_read(ci, OP_ENDPTPRIME, BIT(n))) +			goto done; +		do { +			hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW); +			tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n)); +		} while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW)); +		hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0); +		if (tmp_stat) +			goto done; +	} + +	/*  QH configuration */ +	hwep->qh.ptr->td.next = cpu_to_le32(firstnode->dma); +	hwep->qh.ptr->td.token &= +		cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE)); + +	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) { +		u32 mul = hwreq->req.length / hwep->ep.maxpacket; + +		if (hwreq->req.length == 0 +				|| hwreq->req.length % hwep->ep.maxpacket) +			mul++; +		hwep->qh.ptr->cap |= mul << __ffs(QH_MULT); +	} + +	wmb();   /* synchronize before ep prime */ + +	ret = hw_ep_prime(ci, hwep->num, hwep->dir, +			   hwep->type == USB_ENDPOINT_XFER_CONTROL); +done: +	return ret; +} + +/* + * free_pending_td: remove a pending request for the endpoint + * @hwep: endpoint + */ +static void free_pending_td(struct ci_hw_ep *hwep) +{ +	struct td_node *pending = hwep->pending_td; + +	dma_pool_free(hwep->td_pool, pending->ptr, pending->dma); +	hwep->pending_td = NULL; +	kfree(pending); +} + +/** + * _hardware_dequeue: handles a request at hardware level + * @gadget: gadget + * @hwep:   endpoint + * + * This function returns an error code + */ +static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq) +{ +	u32 tmptoken; +	struct td_node *node, *tmpnode; +	unsigned remaining_length; +	unsigned actual = hwreq->req.length; + +	if (hwreq->req.status != -EALREADY) +		return -EINVAL; + +	hwreq->req.status = 0; + +	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { +		tmptoken = le32_to_cpu(node->ptr->token); +		if ((TD_STATUS_ACTIVE & tmptoken) != 0) { +			hwreq->req.status = -EALREADY; +			return -EBUSY; +		} + +		remaining_length = (tmptoken & TD_TOTAL_BYTES); +		remaining_length >>= __ffs(TD_TOTAL_BYTES); +		actual -= remaining_length; + +		hwreq->req.status = tmptoken & TD_STATUS; +		if ((TD_STATUS_HALTED & hwreq->req.status)) { +			hwreq->req.status = -EPIPE; +			break; +		} else if ((TD_STATUS_DT_ERR & hwreq->req.status)) { +			hwreq->req.status = -EPROTO; +			break; +		} else if ((TD_STATUS_TR_ERR & hwreq->req.status)) { +			hwreq->req.status = -EILSEQ; +			break; +		} + +		if (remaining_length) { +			if (hwep->dir) { +				hwreq->req.status = -EPROTO; +				break; +			} +		} +		/* +		 * As the hardware could still address the freed td +		 * which will run the udc unusable, the cleanup of the +		 * td has to be delayed by one. +		 */ +		if (hwep->pending_td) +			free_pending_td(hwep); + +		hwep->pending_td = node; +		list_del_init(&node->td); +	} + +	usb_gadget_unmap_request(&hwep->ci->gadget, &hwreq->req, hwep->dir); + +	hwreq->req.actual += actual; + +	if (hwreq->req.status) +		return hwreq->req.status; + +	return hwreq->req.actual; +} + +/** + * _ep_nuke: dequeues all endpoint requests + * @hwep: endpoint + * + * This function returns an error code + * Caller must hold lock + */ +static int _ep_nuke(struct ci_hw_ep *hwep) +__releases(hwep->lock) +__acquires(hwep->lock) +{ +	struct td_node *node, *tmpnode; +	if (hwep == NULL) +		return -EINVAL; + +	hw_ep_flush(hwep->ci, hwep->num, hwep->dir); + +	while (!list_empty(&hwep->qh.queue)) { + +		/* pop oldest request */ +		struct ci_hw_req *hwreq = list_entry(hwep->qh.queue.next, +						     struct ci_hw_req, queue); + +		list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { +			dma_pool_free(hwep->td_pool, node->ptr, node->dma); +			list_del_init(&node->td); +			node->ptr = NULL; +			kfree(node); +		} + +		list_del_init(&hwreq->queue); +		hwreq->req.status = -ESHUTDOWN; + +		if (hwreq->req.complete != NULL) { +			spin_unlock(hwep->lock); +			hwreq->req.complete(&hwep->ep, &hwreq->req); +			spin_lock(hwep->lock); +		} +	} + +	if (hwep->pending_td) +		free_pending_td(hwep); + +	return 0; +} + +/** + * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts + * @gadget: gadget + * + * This function returns an error code + */ +static int _gadget_stop_activity(struct usb_gadget *gadget) +{ +	struct usb_ep *ep; +	struct ci_hdrc    *ci = container_of(gadget, struct ci_hdrc, gadget); +	unsigned long flags; + +	spin_lock_irqsave(&ci->lock, flags); +	ci->gadget.speed = USB_SPEED_UNKNOWN; +	ci->remote_wakeup = 0; +	ci->suspended = 0; +	spin_unlock_irqrestore(&ci->lock, flags); + +	/* flush all endpoints */ +	gadget_for_each_ep(ep, gadget) { +		usb_ep_fifo_flush(ep); +	} +	usb_ep_fifo_flush(&ci->ep0out->ep); +	usb_ep_fifo_flush(&ci->ep0in->ep); + +	/* make sure to disable all endpoints */ +	gadget_for_each_ep(ep, gadget) { +		usb_ep_disable(ep); +	} + +	if (ci->status != NULL) { +		usb_ep_free_request(&ci->ep0in->ep, ci->status); +		ci->status = NULL; +	} + +	return 0; +} + +/****************************************************************************** + * ISR block + *****************************************************************************/ +/** + * isr_reset_handler: USB reset interrupt handler + * @ci: UDC device + * + * This function resets USB engine after a bus reset occurred + */ +static void isr_reset_handler(struct ci_hdrc *ci) +__releases(ci->lock) +__acquires(ci->lock) +{ +	int retval; + +	spin_unlock(&ci->lock); +	if (ci->gadget.speed != USB_SPEED_UNKNOWN) { +		if (ci->driver) +			ci->driver->disconnect(&ci->gadget); +	} + +	retval = _gadget_stop_activity(&ci->gadget); +	if (retval) +		goto done; + +	retval = hw_usb_reset(ci); +	if (retval) +		goto done; + +	ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC); +	if (ci->status == NULL) +		retval = -ENOMEM; + +	usb_gadget_set_state(&ci->gadget, USB_STATE_DEFAULT); + +done: +	spin_lock(&ci->lock); + +	if (retval) +		dev_err(ci->dev, "error: %i\n", retval); +} + +/** + * isr_get_status_complete: get_status request complete function + * @ep:  endpoint + * @req: request handled + * + * Caller must release lock + */ +static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) +{ +	if (ep == NULL || req == NULL) +		return; + +	kfree(req->buf); +	usb_ep_free_request(ep, req); +} + +/** + * _ep_queue: queues (submits) an I/O request to an endpoint + * + * Caller must hold lock + */ +static int _ep_queue(struct usb_ep *ep, struct usb_request *req, +		    gfp_t __maybe_unused gfp_flags) +{ +	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep); +	struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req); +	struct ci_hdrc *ci = hwep->ci; +	int retval = 0; + +	if (ep == NULL || req == NULL || hwep->ep.desc == NULL) +		return -EINVAL; + +	if (hwep->type == USB_ENDPOINT_XFER_CONTROL) { +		if (req->length) +			hwep = (ci->ep0_dir == RX) ? +			       ci->ep0out : ci->ep0in; +		if (!list_empty(&hwep->qh.queue)) { +			_ep_nuke(hwep); +			retval = -EOVERFLOW; +			dev_warn(hwep->ci->dev, "endpoint ctrl %X nuked\n", +				 _usb_addr(hwep)); +		} +	} + +	if (usb_endpoint_xfer_isoc(hwep->ep.desc) && +	    hwreq->req.length > (1 + hwep->ep.mult) * hwep->ep.maxpacket) { +		dev_err(hwep->ci->dev, "request length too big for isochronous\n"); +		return -EMSGSIZE; +	} + +	/* first nuke then test link, e.g. previous status has not sent */ +	if (!list_empty(&hwreq->queue)) { +		dev_err(hwep->ci->dev, "request already in queue\n"); +		return -EBUSY; +	} + +	/* push request */ +	hwreq->req.status = -EINPROGRESS; +	hwreq->req.actual = 0; + +	retval = _hardware_enqueue(hwep, hwreq); + +	if (retval == -EALREADY) +		retval = 0; +	if (!retval) +		list_add_tail(&hwreq->queue, &hwep->qh.queue); + +	return retval; +} + +/** + * isr_get_status_response: get_status request response + * @ci: ci struct + * @setup: setup request packet + * + * This function returns an error code + */ +static int isr_get_status_response(struct ci_hdrc *ci, +				   struct usb_ctrlrequest *setup) +__releases(hwep->lock) +__acquires(hwep->lock) +{ +	struct ci_hw_ep *hwep = ci->ep0in; +	struct usb_request *req = NULL; +	gfp_t gfp_flags = GFP_ATOMIC; +	int dir, num, retval; + +	if (hwep == NULL || setup == NULL) +		return -EINVAL; + +	spin_unlock(hwep->lock); +	req = usb_ep_alloc_request(&hwep->ep, gfp_flags); +	spin_lock(hwep->lock); +	if (req == NULL) +		return -ENOMEM; + +	req->complete = isr_get_status_complete; +	req->length   = 2; +	req->buf      = kzalloc(req->length, gfp_flags); +	if (req->buf == NULL) { +		retval = -ENOMEM; +		goto err_free_req; +	} + +	if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { +		/* Assume that device is bus powered for now. */ +		*(u16 *)req->buf = ci->remote_wakeup << 1; +	} else if ((setup->bRequestType & USB_RECIP_MASK) \ +		   == USB_RECIP_ENDPOINT) { +		dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ? +			TX : RX; +		num =  le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK; +		*(u16 *)req->buf = hw_ep_get_halt(ci, num, dir); +	} +	/* else do nothing; reserved for future use */ + +	retval = _ep_queue(&hwep->ep, req, gfp_flags); +	if (retval) +		goto err_free_buf; + +	return 0; + + err_free_buf: +	kfree(req->buf); + err_free_req: +	spin_unlock(hwep->lock); +	usb_ep_free_request(&hwep->ep, req); +	spin_lock(hwep->lock); +	return retval; +} + +/** + * isr_setup_status_complete: setup_status request complete function + * @ep:  endpoint + * @req: request handled + * + * Caller must release lock. Put the port in test mode if test mode + * feature is selected. + */ +static void +isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) +{ +	struct ci_hdrc *ci = req->context; +	unsigned long flags; + +	if (ci->setaddr) { +		hw_usb_set_address(ci, ci->address); +		ci->setaddr = false; +		if (ci->address) +			usb_gadget_set_state(&ci->gadget, USB_STATE_ADDRESS); +	} + +	spin_lock_irqsave(&ci->lock, flags); +	if (ci->test_mode) +		hw_port_test_set(ci, ci->test_mode); +	spin_unlock_irqrestore(&ci->lock, flags); +} + +/** + * isr_setup_status_phase: queues the status phase of a setup transation + * @ci: ci struct + * + * This function returns an error code + */ +static int isr_setup_status_phase(struct ci_hdrc *ci) +{ +	int retval; +	struct ci_hw_ep *hwep; + +	hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in; +	ci->status->context = ci; +	ci->status->complete = isr_setup_status_complete; + +	retval = _ep_queue(&hwep->ep, ci->status, GFP_ATOMIC); + +	return retval; +} + +/** + * isr_tr_complete_low: transaction complete low level handler + * @hwep: endpoint + * + * This function returns an error code + * Caller must hold lock + */ +static int isr_tr_complete_low(struct ci_hw_ep *hwep) +__releases(hwep->lock) +__acquires(hwep->lock) +{ +	struct ci_hw_req *hwreq, *hwreqtemp; +	struct ci_hw_ep *hweptemp = hwep; +	int retval = 0; + +	list_for_each_entry_safe(hwreq, hwreqtemp, &hwep->qh.queue, +			queue) { +		retval = _hardware_dequeue(hwep, hwreq); +		if (retval < 0) +			break; +		list_del_init(&hwreq->queue); +		if (hwreq->req.complete != NULL) { +			spin_unlock(hwep->lock); +			if ((hwep->type == USB_ENDPOINT_XFER_CONTROL) && +					hwreq->req.length) +				hweptemp = hwep->ci->ep0in; +			hwreq->req.complete(&hweptemp->ep, &hwreq->req); +			spin_lock(hwep->lock); +		} +	} + +	if (retval == -EBUSY) +		retval = 0; + +	return retval; +} + +/** + * isr_setup_packet_handler: setup packet handler + * @ci: UDC descriptor + * + * This function handles setup packet  + */ +static void isr_setup_packet_handler(struct ci_hdrc *ci) +__releases(ci->lock) +__acquires(ci->lock) +{ +	struct ci_hw_ep *hwep = &ci->ci_hw_ep[0]; +	struct usb_ctrlrequest req; +	int type, num, dir, err = -EINVAL; +	u8 tmode = 0; + +	/* +	 * Flush data and handshake transactions of previous +	 * setup packet. +	 */ +	_ep_nuke(ci->ep0out); +	_ep_nuke(ci->ep0in); + +	/* read_setup_packet */ +	do { +		hw_test_and_set_setup_guard(ci); +		memcpy(&req, &hwep->qh.ptr->setup, sizeof(req)); +	} while (!hw_test_and_clear_setup_guard(ci)); + +	type = req.bRequestType; + +	ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX; + +	switch (req.bRequest) { +	case USB_REQ_CLEAR_FEATURE: +		if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && +				le16_to_cpu(req.wValue) == +				USB_ENDPOINT_HALT) { +			if (req.wLength != 0) +				break; +			num  = le16_to_cpu(req.wIndex); +			dir = num & USB_ENDPOINT_DIR_MASK; +			num &= USB_ENDPOINT_NUMBER_MASK; +			if (dir) /* TX */ +				num += ci->hw_ep_max / 2; +			if (!ci->ci_hw_ep[num].wedge) { +				spin_unlock(&ci->lock); +				err = usb_ep_clear_halt( +					&ci->ci_hw_ep[num].ep); +				spin_lock(&ci->lock); +				if (err) +					break; +			} +			err = isr_setup_status_phase(ci); +		} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) && +				le16_to_cpu(req.wValue) == +				USB_DEVICE_REMOTE_WAKEUP) { +			if (req.wLength != 0) +				break; +			ci->remote_wakeup = 0; +			err = isr_setup_status_phase(ci); +		} else { +			goto delegate; +		} +		break; +	case USB_REQ_GET_STATUS: +		if (type != (USB_DIR_IN|USB_RECIP_DEVICE)   && +		    type != (USB_DIR_IN|USB_RECIP_ENDPOINT) && +		    type != (USB_DIR_IN|USB_RECIP_INTERFACE)) +			goto delegate; +		if (le16_to_cpu(req.wLength) != 2 || +		    le16_to_cpu(req.wValue)  != 0) +			break; +		err = isr_get_status_response(ci, &req); +		break; +	case USB_REQ_SET_ADDRESS: +		if (type != (USB_DIR_OUT|USB_RECIP_DEVICE)) +			goto delegate; +		if (le16_to_cpu(req.wLength) != 0 || +		    le16_to_cpu(req.wIndex)  != 0) +			break; +		ci->address = (u8)le16_to_cpu(req.wValue); +		ci->setaddr = true; +		err = isr_setup_status_phase(ci); +		break; +	case USB_REQ_SET_FEATURE: +		if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && +				le16_to_cpu(req.wValue) == +				USB_ENDPOINT_HALT) { +			if (req.wLength != 0) +				break; +			num  = le16_to_cpu(req.wIndex); +			dir = num & USB_ENDPOINT_DIR_MASK; +			num &= USB_ENDPOINT_NUMBER_MASK; +			if (dir) /* TX */ +				num += ci->hw_ep_max / 2; + +			spin_unlock(&ci->lock); +			err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep); +			spin_lock(&ci->lock); +			if (!err) +				isr_setup_status_phase(ci); +		} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) { +			if (req.wLength != 0) +				break; +			switch (le16_to_cpu(req.wValue)) { +			case USB_DEVICE_REMOTE_WAKEUP: +				ci->remote_wakeup = 1; +				err = isr_setup_status_phase(ci); +				break; +			case USB_DEVICE_TEST_MODE: +				tmode = le16_to_cpu(req.wIndex) >> 8; +				switch (tmode) { +				case TEST_J: +				case TEST_K: +				case TEST_SE0_NAK: +				case TEST_PACKET: +				case TEST_FORCE_EN: +					ci->test_mode = tmode; +					err = isr_setup_status_phase( +							ci); +					break; +				default: +					break; +				} +				break; +			case USB_DEVICE_B_HNP_ENABLE: +				if (ci_otg_is_fsm_mode(ci)) { +					ci->gadget.b_hnp_enable = 1; +					err = isr_setup_status_phase( +							ci); +				} +				break; +			default: +				goto delegate; +			} +		} else { +			goto delegate; +		} +		break; +	default: +delegate: +		if (req.wLength == 0)   /* no data phase */ +			ci->ep0_dir = TX; + +		spin_unlock(&ci->lock); +		err = ci->driver->setup(&ci->gadget, &req); +		spin_lock(&ci->lock); +		break; +	} + +	if (err < 0) { +		spin_unlock(&ci->lock); +		if (usb_ep_set_halt(&hwep->ep)) +			dev_err(ci->dev, "error: ep_set_halt\n"); +		spin_lock(&ci->lock); +	} +} + +/** + * isr_tr_complete_handler: transaction complete interrupt handler + * @ci: UDC descriptor + * + * This function handles traffic events + */ +static void isr_tr_complete_handler(struct ci_hdrc *ci) +__releases(ci->lock) +__acquires(ci->lock) +{ +	unsigned i; +	int err; + +	for (i = 0; i < ci->hw_ep_max; i++) { +		struct ci_hw_ep *hwep  = &ci->ci_hw_ep[i]; + +		if (hwep->ep.desc == NULL) +			continue;   /* not configured */ + +		if (hw_test_and_clear_complete(ci, i)) { +			err = isr_tr_complete_low(hwep); +			if (hwep->type == USB_ENDPOINT_XFER_CONTROL) { +				if (err > 0)   /* needs status phase */ +					err = isr_setup_status_phase(ci); +				if (err < 0) { +					spin_unlock(&ci->lock); +					if (usb_ep_set_halt(&hwep->ep)) +						dev_err(ci->dev, +							"error: ep_set_halt\n"); +					spin_lock(&ci->lock); +				} +			} +		} + +		/* Only handle setup packet below */ +		if (i == 0 && +			hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0))) +			isr_setup_packet_handler(ci); +	} +} + +/****************************************************************************** + * ENDPT block + *****************************************************************************/ +/** + * ep_enable: configure endpoint, making it usable + * + * Check usb_ep_enable() at "usb_gadget.h" for details + */ +static int ep_enable(struct usb_ep *ep, +		     const struct usb_endpoint_descriptor *desc) +{ +	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); +	int retval = 0; +	unsigned long flags; +	u32 cap = 0; + +	if (ep == NULL || desc == NULL) +		return -EINVAL; + +	spin_lock_irqsave(hwep->lock, flags); + +	/* only internal SW should enable ctrl endpts */ + +	hwep->ep.desc = desc; + +	if (!list_empty(&hwep->qh.queue)) +		dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n"); + +	hwep->dir  = usb_endpoint_dir_in(desc) ? TX : RX; +	hwep->num  = usb_endpoint_num(desc); +	hwep->type = usb_endpoint_type(desc); + +	hwep->ep.maxpacket = usb_endpoint_maxp(desc) & 0x07ff; +	hwep->ep.mult = QH_ISO_MULT(usb_endpoint_maxp(desc)); + +	if (hwep->type == USB_ENDPOINT_XFER_CONTROL) +		cap |= QH_IOS; + +	cap |= QH_ZLT; +	cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT; +	/* +	 * For ISO-TX, we set mult at QH as the largest value, and use +	 * MultO at TD as real mult value. +	 */ +	if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) +		cap |= 3 << __ffs(QH_MULT); + +	hwep->qh.ptr->cap = cpu_to_le32(cap); + +	hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE);   /* needed? */ + +	if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) { +		dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n"); +		retval = -EINVAL; +	} + +	/* +	 * Enable endpoints in the HW other than ep0 as ep0 +	 * is always enabled +	 */ +	if (hwep->num) +		retval |= hw_ep_enable(hwep->ci, hwep->num, hwep->dir, +				       hwep->type); + +	spin_unlock_irqrestore(hwep->lock, flags); +	return retval; +} + +/** + * ep_disable: endpoint is no longer usable + * + * Check usb_ep_disable() at "usb_gadget.h" for details + */ +static int ep_disable(struct usb_ep *ep) +{ +	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); +	int direction, retval = 0; +	unsigned long flags; + +	if (ep == NULL) +		return -EINVAL; +	else if (hwep->ep.desc == NULL) +		return -EBUSY; + +	spin_lock_irqsave(hwep->lock, flags); + +	/* only internal SW should disable ctrl endpts */ + +	direction = hwep->dir; +	do { +		retval |= _ep_nuke(hwep); +		retval |= hw_ep_disable(hwep->ci, hwep->num, hwep->dir); + +		if (hwep->type == USB_ENDPOINT_XFER_CONTROL) +			hwep->dir = (hwep->dir == TX) ? RX : TX; + +	} while (hwep->dir != direction); + +	hwep->ep.desc = NULL; + +	spin_unlock_irqrestore(hwep->lock, flags); +	return retval; +} + +/** + * ep_alloc_request: allocate a request object to use with this endpoint + * + * Check usb_ep_alloc_request() at "usb_gadget.h" for details + */ +static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) +{ +	struct ci_hw_req *hwreq = NULL; + +	if (ep == NULL) +		return NULL; + +	hwreq = kzalloc(sizeof(struct ci_hw_req), gfp_flags); +	if (hwreq != NULL) { +		INIT_LIST_HEAD(&hwreq->queue); +		INIT_LIST_HEAD(&hwreq->tds); +	} + +	return (hwreq == NULL) ? NULL : &hwreq->req; +} + +/** + * ep_free_request: frees a request object + * + * Check usb_ep_free_request() at "usb_gadget.h" for details + */ +static void ep_free_request(struct usb_ep *ep, struct usb_request *req) +{ +	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep); +	struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req); +	struct td_node *node, *tmpnode; +	unsigned long flags; + +	if (ep == NULL || req == NULL) { +		return; +	} else if (!list_empty(&hwreq->queue)) { +		dev_err(hwep->ci->dev, "freeing queued request\n"); +		return; +	} + +	spin_lock_irqsave(hwep->lock, flags); + +	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { +		dma_pool_free(hwep->td_pool, node->ptr, node->dma); +		list_del_init(&node->td); +		node->ptr = NULL; +		kfree(node); +	} + +	kfree(hwreq); + +	spin_unlock_irqrestore(hwep->lock, flags); +} + +/** + * ep_queue: queues (submits) an I/O request to an endpoint + * + * Check usb_ep_queue()* at usb_gadget.h" for details + */ +static int ep_queue(struct usb_ep *ep, struct usb_request *req, +		    gfp_t __maybe_unused gfp_flags) +{ +	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep); +	int retval = 0; +	unsigned long flags; + +	if (ep == NULL || req == NULL || hwep->ep.desc == NULL) +		return -EINVAL; + +	spin_lock_irqsave(hwep->lock, flags); +	retval = _ep_queue(ep, req, gfp_flags); +	spin_unlock_irqrestore(hwep->lock, flags); +	return retval; +} + +/** + * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint + * + * Check usb_ep_dequeue() at "usb_gadget.h" for details + */ +static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) +{ +	struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep); +	struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req); +	unsigned long flags; +	struct td_node *node, *tmpnode; + +	if (ep == NULL || req == NULL || hwreq->req.status != -EALREADY || +		hwep->ep.desc == NULL || list_empty(&hwreq->queue) || +		list_empty(&hwep->qh.queue)) +		return -EINVAL; + +	spin_lock_irqsave(hwep->lock, flags); + +	hw_ep_flush(hwep->ci, hwep->num, hwep->dir); + +	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { +		dma_pool_free(hwep->td_pool, node->ptr, node->dma); +		list_del(&node->td); +		kfree(node); +	} + +	/* pop request */ +	list_del_init(&hwreq->queue); + +	usb_gadget_unmap_request(&hwep->ci->gadget, req, hwep->dir); + +	req->status = -ECONNRESET; + +	if (hwreq->req.complete != NULL) { +		spin_unlock(hwep->lock); +		hwreq->req.complete(&hwep->ep, &hwreq->req); +		spin_lock(hwep->lock); +	} + +	spin_unlock_irqrestore(hwep->lock, flags); +	return 0; +} + +/** + * ep_set_halt: sets the endpoint halt feature + * + * Check usb_ep_set_halt() at "usb_gadget.h" for details + */ +static int ep_set_halt(struct usb_ep *ep, int value) +{ +	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); +	int direction, retval = 0; +	unsigned long flags; + +	if (ep == NULL || hwep->ep.desc == NULL) +		return -EINVAL; + +	if (usb_endpoint_xfer_isoc(hwep->ep.desc)) +		return -EOPNOTSUPP; + +	spin_lock_irqsave(hwep->lock, flags); + +#ifndef STALL_IN +	/* g_file_storage MS compliant but g_zero fails chapter 9 compliance */ +	if (value && hwep->type == USB_ENDPOINT_XFER_BULK && hwep->dir == TX && +	    !list_empty(&hwep->qh.queue)) { +		spin_unlock_irqrestore(hwep->lock, flags); +		return -EAGAIN; +	} +#endif + +	direction = hwep->dir; +	do { +		retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value); + +		if (!value) +			hwep->wedge = 0; + +		if (hwep->type == USB_ENDPOINT_XFER_CONTROL) +			hwep->dir = (hwep->dir == TX) ? RX : TX; + +	} while (hwep->dir != direction); + +	spin_unlock_irqrestore(hwep->lock, flags); +	return retval; +} + +/** + * ep_set_wedge: sets the halt feature and ignores clear requests + * + * Check usb_ep_set_wedge() at "usb_gadget.h" for details + */ +static int ep_set_wedge(struct usb_ep *ep) +{ +	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); +	unsigned long flags; + +	if (ep == NULL || hwep->ep.desc == NULL) +		return -EINVAL; + +	spin_lock_irqsave(hwep->lock, flags); +	hwep->wedge = 1; +	spin_unlock_irqrestore(hwep->lock, flags); + +	return usb_ep_set_halt(ep); +} + +/** + * ep_fifo_flush: flushes contents of a fifo + * + * Check usb_ep_fifo_flush() at "usb_gadget.h" for details + */ +static void ep_fifo_flush(struct usb_ep *ep) +{ +	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep); +	unsigned long flags; + +	if (ep == NULL) { +		dev_err(hwep->ci->dev, "%02X: -EINVAL\n", _usb_addr(hwep)); +		return; +	} + +	spin_lock_irqsave(hwep->lock, flags); + +	hw_ep_flush(hwep->ci, hwep->num, hwep->dir); + +	spin_unlock_irqrestore(hwep->lock, flags); +} + +/** + * Endpoint-specific part of the API to the USB controller hardware + * Check "usb_gadget.h" for details + */ +static const struct usb_ep_ops usb_ep_ops = { +	.enable	       = ep_enable, +	.disable       = ep_disable, +	.alloc_request = ep_alloc_request, +	.free_request  = ep_free_request, +	.queue	       = ep_queue, +	.dequeue       = ep_dequeue, +	.set_halt      = ep_set_halt, +	.set_wedge     = ep_set_wedge, +	.fifo_flush    = ep_fifo_flush, +}; + +/****************************************************************************** + * GADGET block + *****************************************************************************/ +static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active) +{ +	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); +	unsigned long flags; +	int gadget_ready = 0; + +	spin_lock_irqsave(&ci->lock, flags); +	ci->vbus_active = is_active; +	if (ci->driver) +		gadget_ready = 1; +	spin_unlock_irqrestore(&ci->lock, flags); + +	if (gadget_ready) { +		if (is_active) { +			pm_runtime_get_sync(&_gadget->dev); +			hw_device_reset(ci, USBMODE_CM_DC); +			hw_device_state(ci, ci->ep0out->qh.dma); +			usb_gadget_set_state(_gadget, USB_STATE_POWERED); +		} else { +			if (ci->driver) +				ci->driver->disconnect(&ci->gadget); +			hw_device_state(ci, 0); +			if (ci->platdata->notify_event) +				ci->platdata->notify_event(ci, +				CI_HDRC_CONTROLLER_STOPPED_EVENT); +			_gadget_stop_activity(&ci->gadget); +			pm_runtime_put_sync(&_gadget->dev); +			usb_gadget_set_state(_gadget, USB_STATE_NOTATTACHED); +		} +	} + +	return 0; +} + +static int ci_udc_wakeup(struct usb_gadget *_gadget) +{ +	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); +	unsigned long flags; +	int ret = 0; + +	spin_lock_irqsave(&ci->lock, flags); +	if (!ci->remote_wakeup) { +		ret = -EOPNOTSUPP; +		goto out; +	} +	if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) { +		ret = -EINVAL; +		goto out; +	} +	hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR); +out: +	spin_unlock_irqrestore(&ci->lock, flags); +	return ret; +} + +static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma) +{ +	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); + +	if (ci->transceiver) +		return usb_phy_set_power(ci->transceiver, ma); +	return -ENOTSUPP; +} + +/* Change Data+ pullup status + * this func is used by usb_gadget_connect/disconnet + */ +static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on) +{ +	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); + +	if (!ci->vbus_active) +		return -EOPNOTSUPP; + +	if (is_on) +		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); +	else +		hw_write(ci, OP_USBCMD, USBCMD_RS, 0); + +	return 0; +} + +static int ci_udc_start(struct usb_gadget *gadget, +			 struct usb_gadget_driver *driver); +static int ci_udc_stop(struct usb_gadget *gadget, +			struct usb_gadget_driver *driver); +/** + * Device operations part of the API to the USB controller hardware, + * which don't involve endpoints (or i/o) + * Check  "usb_gadget.h" for details + */ +static const struct usb_gadget_ops usb_gadget_ops = { +	.vbus_session	= ci_udc_vbus_session, +	.wakeup		= ci_udc_wakeup, +	.pullup		= ci_udc_pullup, +	.vbus_draw	= ci_udc_vbus_draw, +	.udc_start	= ci_udc_start, +	.udc_stop	= ci_udc_stop, +}; + +static int init_eps(struct ci_hdrc *ci) +{ +	int retval = 0, i, j; + +	for (i = 0; i < ci->hw_ep_max/2; i++) +		for (j = RX; j <= TX; j++) { +			int k = i + j * ci->hw_ep_max/2; +			struct ci_hw_ep *hwep = &ci->ci_hw_ep[k]; + +			scnprintf(hwep->name, sizeof(hwep->name), "ep%i%s", i, +					(j == TX)  ? "in" : "out"); + +			hwep->ci          = ci; +			hwep->lock         = &ci->lock; +			hwep->td_pool      = ci->td_pool; + +			hwep->ep.name      = hwep->name; +			hwep->ep.ops       = &usb_ep_ops; +			/* +			 * for ep0: maxP defined in desc, for other +			 * eps, maxP is set by epautoconfig() called +			 * by gadget layer +			 */ +			usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0); + +			INIT_LIST_HEAD(&hwep->qh.queue); +			hwep->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL, +						     &hwep->qh.dma); +			if (hwep->qh.ptr == NULL) +				retval = -ENOMEM; +			else +				memset(hwep->qh.ptr, 0, sizeof(*hwep->qh.ptr)); + +			/* +			 * set up shorthands for ep0 out and in endpoints, +			 * don't add to gadget's ep_list +			 */ +			if (i == 0) { +				if (j == RX) +					ci->ep0out = hwep; +				else +					ci->ep0in = hwep; + +				usb_ep_set_maxpacket_limit(&hwep->ep, CTRL_PAYLOAD_MAX); +				continue; +			} + +			list_add_tail(&hwep->ep.ep_list, &ci->gadget.ep_list); +		} + +	return retval; +} + +static void destroy_eps(struct ci_hdrc *ci) +{ +	int i; + +	for (i = 0; i < ci->hw_ep_max; i++) { +		struct ci_hw_ep *hwep = &ci->ci_hw_ep[i]; + +		if (hwep->pending_td) +			free_pending_td(hwep); +		dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma); +	} +} + +/** + * ci_udc_start: register a gadget driver + * @gadget: our gadget + * @driver: the driver being registered + * + * Interrupts are enabled here. + */ +static int ci_udc_start(struct usb_gadget *gadget, +			 struct usb_gadget_driver *driver) +{ +	struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); +	unsigned long flags; +	int retval = -ENOMEM; + +	if (driver->disconnect == NULL) +		return -EINVAL; + + +	ci->ep0out->ep.desc = &ctrl_endpt_out_desc; +	retval = usb_ep_enable(&ci->ep0out->ep); +	if (retval) +		return retval; + +	ci->ep0in->ep.desc = &ctrl_endpt_in_desc; +	retval = usb_ep_enable(&ci->ep0in->ep); +	if (retval) +		return retval; + +	ci->driver = driver; + +	/* Start otg fsm for B-device */ +	if (ci_otg_is_fsm_mode(ci) && ci->fsm.id) { +		ci_hdrc_otg_fsm_start(ci); +		return retval; +	} + +	pm_runtime_get_sync(&ci->gadget.dev); +	if (ci->vbus_active) { +		spin_lock_irqsave(&ci->lock, flags); +		hw_device_reset(ci, USBMODE_CM_DC); +	} else { +		pm_runtime_put_sync(&ci->gadget.dev); +		return retval; +	} + +	retval = hw_device_state(ci, ci->ep0out->qh.dma); +	spin_unlock_irqrestore(&ci->lock, flags); +	if (retval) +		pm_runtime_put_sync(&ci->gadget.dev); + +	return retval; +} + +/** + * ci_udc_stop: unregister a gadget driver + */ +static int ci_udc_stop(struct usb_gadget *gadget, +			struct usb_gadget_driver *driver) +{ +	struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); +	unsigned long flags; + +	spin_lock_irqsave(&ci->lock, flags); + +	if (ci->vbus_active) { +		hw_device_state(ci, 0); +		if (ci->platdata->notify_event) +			ci->platdata->notify_event(ci, +			CI_HDRC_CONTROLLER_STOPPED_EVENT); +		spin_unlock_irqrestore(&ci->lock, flags); +		_gadget_stop_activity(&ci->gadget); +		spin_lock_irqsave(&ci->lock, flags); +		pm_runtime_put(&ci->gadget.dev); +	} + +	ci->driver = NULL; +	spin_unlock_irqrestore(&ci->lock, flags); + +	return 0; +} + +/****************************************************************************** + * BUS block + *****************************************************************************/ +/** + * udc_irq: ci interrupt handler + * + * This function returns IRQ_HANDLED if the IRQ has been handled + * It locks access to registers + */ +static irqreturn_t udc_irq(struct ci_hdrc *ci) +{ +	irqreturn_t retval; +	u32 intr; + +	if (ci == NULL) +		return IRQ_HANDLED; + +	spin_lock(&ci->lock); + +	if (ci->platdata->flags & CI_HDRC_REGS_SHARED) { +		if (hw_read(ci, OP_USBMODE, USBMODE_CM) != +				USBMODE_CM_DC) { +			spin_unlock(&ci->lock); +			return IRQ_NONE; +		} +	} +	intr = hw_test_and_clear_intr_active(ci); + +	if (intr) { +		/* order defines priority - do NOT change it */ +		if (USBi_URI & intr) +			isr_reset_handler(ci); + +		if (USBi_PCI & intr) { +			ci->gadget.speed = hw_port_is_high_speed(ci) ? +				USB_SPEED_HIGH : USB_SPEED_FULL; +			if (ci->suspended && ci->driver->resume) { +				spin_unlock(&ci->lock); +				ci->driver->resume(&ci->gadget); +				spin_lock(&ci->lock); +				ci->suspended = 0; +			} +		} + +		if (USBi_UI  & intr) +			isr_tr_complete_handler(ci); + +		if (USBi_SLI & intr) { +			if (ci->gadget.speed != USB_SPEED_UNKNOWN && +			    ci->driver->suspend) { +				ci->suspended = 1; +				spin_unlock(&ci->lock); +				ci->driver->suspend(&ci->gadget); +				usb_gadget_set_state(&ci->gadget, +						USB_STATE_SUSPENDED); +				spin_lock(&ci->lock); +			} +		} +		retval = IRQ_HANDLED; +	} else { +		retval = IRQ_NONE; +	} +	spin_unlock(&ci->lock); + +	return retval; +} + +/** + * udc_start: initialize gadget role + * @ci: chipidea controller + */ +static int udc_start(struct ci_hdrc *ci) +{ +	struct device *dev = ci->dev; +	int retval = 0; + +	spin_lock_init(&ci->lock); + +	ci->gadget.ops          = &usb_gadget_ops; +	ci->gadget.speed        = USB_SPEED_UNKNOWN; +	ci->gadget.max_speed    = USB_SPEED_HIGH; +	ci->gadget.is_otg       = ci->is_otg ? 1 : 0; +	ci->gadget.name         = ci->platdata->name; + +	INIT_LIST_HEAD(&ci->gadget.ep_list); + +	/* alloc resources */ +	ci->qh_pool = dma_pool_create("ci_hw_qh", dev, +				       sizeof(struct ci_hw_qh), +				       64, CI_HDRC_PAGE_SIZE); +	if (ci->qh_pool == NULL) +		return -ENOMEM; + +	ci->td_pool = dma_pool_create("ci_hw_td", dev, +				       sizeof(struct ci_hw_td), +				       64, CI_HDRC_PAGE_SIZE); +	if (ci->td_pool == NULL) { +		retval = -ENOMEM; +		goto free_qh_pool; +	} + +	retval = init_eps(ci); +	if (retval) +		goto free_pools; + +	ci->gadget.ep0 = &ci->ep0in->ep; + +	retval = usb_add_gadget_udc(dev, &ci->gadget); +	if (retval) +		goto destroy_eps; + +	pm_runtime_no_callbacks(&ci->gadget.dev); +	pm_runtime_enable(&ci->gadget.dev); + +	return retval; + +destroy_eps: +	destroy_eps(ci); +free_pools: +	dma_pool_destroy(ci->td_pool); +free_qh_pool: +	dma_pool_destroy(ci->qh_pool); +	return retval; +} + +/** + * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC + * + * No interrupts active, the IRQ has been released + */ +void ci_hdrc_gadget_destroy(struct ci_hdrc *ci) +{ +	if (!ci->roles[CI_ROLE_GADGET]) +		return; + +	usb_del_gadget_udc(&ci->gadget); + +	destroy_eps(ci); + +	dma_pool_destroy(ci->td_pool); +	dma_pool_destroy(ci->qh_pool); +} + +static int udc_id_switch_for_device(struct ci_hdrc *ci) +{ +	if (ci->is_otg) +		/* Clear and enable BSV irq */ +		hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE, +					OTGSC_BSVIS | OTGSC_BSVIE); + +	return 0; +} + +static void udc_id_switch_for_host(struct ci_hdrc *ci) +{ +	/* +	 * host doesn't care B_SESSION_VALID event +	 * so clear and disbale BSV irq +	 */ +	if (ci->is_otg) +		hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS); +} + +/** + * ci_hdrc_gadget_init - initialize device related bits + * ci: the controller + * + * This function initializes the gadget, if the device is "device capable". + */ +int ci_hdrc_gadget_init(struct ci_hdrc *ci) +{ +	struct ci_role_driver *rdrv; + +	if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC)) +		return -ENXIO; + +	rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL); +	if (!rdrv) +		return -ENOMEM; + +	rdrv->start	= udc_id_switch_for_device; +	rdrv->stop	= udc_id_switch_for_host; +	rdrv->irq	= udc_irq; +	rdrv->name	= "gadget"; +	ci->roles[CI_ROLE_GADGET] = rdrv; + +	return udc_start(ci); +}  | 
