diff options
Diffstat (limited to 'drivers/usb/chipidea/core.c')
| -rw-r--r-- | drivers/usb/chipidea/core.c | 754 |
1 files changed, 754 insertions, 0 deletions
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c new file mode 100644 index 00000000000..619d13e2999 --- /dev/null +++ b/drivers/usb/chipidea/core.c @@ -0,0 +1,754 @@ +/* + * core.c - ChipIdea USB IP core family device controller + * + * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. + * + * Author: David Lopo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Description: ChipIdea USB IP core family device controller + * + * This driver is composed of several blocks: + * - HW: hardware interface + * - DBG: debug facilities (optional) + * - UTIL: utilities + * - ISR: interrupts handling + * - ENDPT: endpoint operations (Gadget API) + * - GADGET: gadget operations (Gadget API) + * - BUS: bus glue code, bus abstraction layer + * + * Compile Options + * - CONFIG_USB_CHIPIDEA_DEBUG: enable debug facilities + * - STALL_IN: non-empty bulk-in pipes cannot be halted + * if defined mass storage compliance succeeds but with warnings + * => case 4: Hi > Dn + * => case 5: Hi > Di + * => case 8: Hi <> Do + * if undefined usbtest 13 fails + * - TRACE: enable function tracing (depends on DEBUG) + * + * Main Features + * - Chapter 9 & Mass Storage Compliance with Gadget File Storage + * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined) + * - Normal & LPM support + * + * USBTEST Report + * - OK: 0-12, 13 (STALL_IN defined) & 14 + * - Not Supported: 15 & 16 (ISO) + * + * TODO List + * - Suspend & Remote Wakeup + */ +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/idr.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/pm_runtime.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> +#include <linux/usb/chipidea.h> +#include <linux/usb/of.h> +#include <linux/of.h> +#include <linux/phy.h> +#include <linux/regulator/consumer.h> + +#include "ci.h" +#include "udc.h" +#include "bits.h" +#include "host.h" +#include "debug.h" +#include "otg.h" +#include "otg_fsm.h" + +/* Controller register map */ +static const u8 ci_regs_nolpm[] = { + [CAP_CAPLENGTH] = 0x00U, + [CAP_HCCPARAMS] = 0x08U, + [CAP_DCCPARAMS] = 0x24U, + [CAP_TESTMODE] = 0x38U, + [OP_USBCMD] = 0x00U, + [OP_USBSTS] = 0x04U, + [OP_USBINTR] = 0x08U, + [OP_DEVICEADDR] = 0x14U, + [OP_ENDPTLISTADDR] = 0x18U, + [OP_PORTSC] = 0x44U, + [OP_DEVLC] = 0x84U, + [OP_OTGSC] = 0x64U, + [OP_USBMODE] = 0x68U, + [OP_ENDPTSETUPSTAT] = 0x6CU, + [OP_ENDPTPRIME] = 0x70U, + [OP_ENDPTFLUSH] = 0x74U, + [OP_ENDPTSTAT] = 0x78U, + [OP_ENDPTCOMPLETE] = 0x7CU, + [OP_ENDPTCTRL] = 0x80U, +}; + +static const u8 ci_regs_lpm[] = { + [CAP_CAPLENGTH] = 0x00U, + [CAP_HCCPARAMS] = 0x08U, + [CAP_DCCPARAMS] = 0x24U, + [CAP_TESTMODE] = 0xFCU, + [OP_USBCMD] = 0x00U, + [OP_USBSTS] = 0x04U, + [OP_USBINTR] = 0x08U, + [OP_DEVICEADDR] = 0x14U, + [OP_ENDPTLISTADDR] = 0x18U, + [OP_PORTSC] = 0x44U, + [OP_DEVLC] = 0x84U, + [OP_OTGSC] = 0xC4U, + [OP_USBMODE] = 0xC8U, + [OP_ENDPTSETUPSTAT] = 0xD8U, + [OP_ENDPTPRIME] = 0xDCU, + [OP_ENDPTFLUSH] = 0xE0U, + [OP_ENDPTSTAT] = 0xE4U, + [OP_ENDPTCOMPLETE] = 0xE8U, + [OP_ENDPTCTRL] = 0xECU, +}; + +static int hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm) +{ + int i; + + for (i = 0; i < OP_ENDPTCTRL; i++) + ci->hw_bank.regmap[i] = + (i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) + + (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]); + + for (; i <= OP_LAST; i++) + ci->hw_bank.regmap[i] = ci->hw_bank.op + + 4 * (i - OP_ENDPTCTRL) + + (is_lpm + ? ci_regs_lpm[OP_ENDPTCTRL] + : ci_regs_nolpm[OP_ENDPTCTRL]); + + return 0; +} + +/** + * hw_read_intr_enable: returns interrupt enable register + * + * This function returns register data + */ +u32 hw_read_intr_enable(struct ci_hdrc *ci) +{ + return hw_read(ci, OP_USBINTR, ~0); +} + +/** + * hw_read_intr_status: returns interrupt status register + * + * This function returns register data + */ +u32 hw_read_intr_status(struct ci_hdrc *ci) +{ + return hw_read(ci, OP_USBSTS, ~0); +} + +/** + * hw_port_test_set: writes port test mode (execute without interruption) + * @mode: new value + * + * This function returns an error code + */ +int hw_port_test_set(struct ci_hdrc *ci, u8 mode) +{ + const u8 TEST_MODE_MAX = 7; + + if (mode > TEST_MODE_MAX) + return -EINVAL; + + hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC)); + return 0; +} + +/** + * hw_port_test_get: reads port test mode value + * + * This function returns port test mode value + */ +u8 hw_port_test_get(struct ci_hdrc *ci) +{ + return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC); +} + +/* The PHY enters/leaves low power mode */ +static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable) +{ + enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC; + bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm))); + + if (enable && !lpm) { + hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm), + PORTSC_PHCD(ci->hw_bank.lpm)); + } else if (!enable && lpm) { + hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm), + 0); + /* + * the PHY needs some time (less + * than 1ms) to leave low power mode. + */ + usleep_range(1000, 1100); + } +} + +static int hw_device_init(struct ci_hdrc *ci, void __iomem *base) +{ + u32 reg; + + /* bank is a module variable */ + ci->hw_bank.abs = base; + + ci->hw_bank.cap = ci->hw_bank.abs; + ci->hw_bank.cap += ci->platdata->capoffset; + ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff); + + hw_alloc_regmap(ci, false); + reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >> + __ffs(HCCPARAMS_LEN); + ci->hw_bank.lpm = reg; + if (reg) + hw_alloc_regmap(ci, !!reg); + ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs; + ci->hw_bank.size += OP_LAST; + ci->hw_bank.size /= sizeof(u32); + + reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >> + __ffs(DCCPARAMS_DEN); + ci->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ + + if (ci->hw_ep_max > ENDPT_MAX) + return -ENODEV; + + ci_hdrc_enter_lpm(ci, false); + + /* Disable all interrupts bits */ + hw_write(ci, OP_USBINTR, 0xffffffff, 0); + + /* Clear all interrupts status bits*/ + hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff); + + dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n", + ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op); + + /* setup lock mode ? */ + + /* ENDPTSETUPSTAT is '0' by default */ + + /* HCSPARAMS.bf.ppc SHOULD BE zero for device */ + + return 0; +} + +static void hw_phymode_configure(struct ci_hdrc *ci) +{ + u32 portsc, lpm, sts = 0; + + switch (ci->platdata->phy_mode) { + case USBPHY_INTERFACE_MODE_UTMI: + portsc = PORTSC_PTS(PTS_UTMI); + lpm = DEVLC_PTS(PTS_UTMI); + break; + case USBPHY_INTERFACE_MODE_UTMIW: + portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW; + lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW; + break; + case USBPHY_INTERFACE_MODE_ULPI: + portsc = PORTSC_PTS(PTS_ULPI); + lpm = DEVLC_PTS(PTS_ULPI); + break; + case USBPHY_INTERFACE_MODE_SERIAL: + portsc = PORTSC_PTS(PTS_SERIAL); + lpm = DEVLC_PTS(PTS_SERIAL); + sts = 1; + break; + case USBPHY_INTERFACE_MODE_HSIC: + portsc = PORTSC_PTS(PTS_HSIC); + lpm = DEVLC_PTS(PTS_HSIC); + break; + default: + return; + } + + if (ci->hw_bank.lpm) { + hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm); + if (sts) + hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS); + } else { + hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc); + if (sts) + hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS); + } +} + +/** + * ci_usb_phy_init: initialize phy according to different phy type + * @ci: the controller + * + * This function returns an error code if usb_phy_init has failed + */ +static int ci_usb_phy_init(struct ci_hdrc *ci) +{ + int ret; + + switch (ci->platdata->phy_mode) { + case USBPHY_INTERFACE_MODE_UTMI: + case USBPHY_INTERFACE_MODE_UTMIW: + case USBPHY_INTERFACE_MODE_HSIC: + ret = usb_phy_init(ci->transceiver); + if (ret) + return ret; + hw_phymode_configure(ci); + break; + case USBPHY_INTERFACE_MODE_ULPI: + case USBPHY_INTERFACE_MODE_SERIAL: + hw_phymode_configure(ci); + ret = usb_phy_init(ci->transceiver); + if (ret) + return ret; + break; + default: + ret = usb_phy_init(ci->transceiver); + } + + return ret; +} + +/** + * hw_device_reset: resets chip (execute without interruption) + * @ci: the controller + * + * This function returns an error code + */ +int hw_device_reset(struct ci_hdrc *ci, u32 mode) +{ + /* should flush & stop before reset */ + hw_write(ci, OP_ENDPTFLUSH, ~0, ~0); + hw_write(ci, OP_USBCMD, USBCMD_RS, 0); + + hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST); + while (hw_read(ci, OP_USBCMD, USBCMD_RST)) + udelay(10); /* not RTOS friendly */ + + if (ci->platdata->notify_event) + ci->platdata->notify_event(ci, + CI_HDRC_CONTROLLER_RESET_EVENT); + + if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING) + hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); + + if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) { + if (ci->hw_bank.lpm) + hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC); + else + hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC); + } + + /* USBMODE should be configured step by step */ + hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); + hw_write(ci, OP_USBMODE, USBMODE_CM, mode); + /* HW >= 2.3 */ + hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); + + if (hw_read(ci, OP_USBMODE, USBMODE_CM) != mode) { + pr_err("cannot enter in %s mode", ci_role(ci)->name); + pr_err("lpm = %i", ci->hw_bank.lpm); + return -ENODEV; + } + + return 0; +} + +/** + * hw_wait_reg: wait the register value + * + * Sometimes, it needs to wait register value before going on. + * Eg, when switch to device mode, the vbus value should be lower + * than OTGSC_BSV before connects to host. + * + * @ci: the controller + * @reg: register index + * @mask: mast bit + * @value: the bit value to wait + * @timeout_ms: timeout in millisecond + * + * This function returns an error code if timeout + */ +int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask, + u32 value, unsigned int timeout_ms) +{ + unsigned long elapse = jiffies + msecs_to_jiffies(timeout_ms); + + while (hw_read(ci, reg, mask) != value) { + if (time_after(jiffies, elapse)) { + dev_err(ci->dev, "timeout waiting for %08x in %d\n", + mask, reg); + return -ETIMEDOUT; + } + msleep(20); + } + + return 0; +} + +static irqreturn_t ci_irq(int irq, void *data) +{ + struct ci_hdrc *ci = data; + irqreturn_t ret = IRQ_NONE; + u32 otgsc = 0; + + if (ci->is_otg) { + otgsc = hw_read_otgsc(ci, ~0); + if (ci_otg_is_fsm_mode(ci)) { + ret = ci_otg_fsm_irq(ci); + if (ret == IRQ_HANDLED) + return ret; + } + } + + /* + * Handle id change interrupt, it indicates device/host function + * switch. + */ + if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) { + ci->id_event = true; + /* Clear ID change irq status */ + hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS); + ci_otg_queue_work(ci); + return IRQ_HANDLED; + } + + /* + * Handle vbus change interrupt, it indicates device connection + * and disconnection events. + */ + if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) { + ci->b_sess_valid_event = true; + /* Clear BSV irq */ + hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS); + ci_otg_queue_work(ci); + return IRQ_HANDLED; + } + + /* Handle device/host interrupt */ + if (ci->role != CI_ROLE_END) + ret = ci_role(ci)->irq(ci); + + return ret; +} + +static int ci_get_platdata(struct device *dev, + struct ci_hdrc_platform_data *platdata) +{ + if (!platdata->phy_mode) + platdata->phy_mode = of_usb_get_phy_mode(dev->of_node); + + if (!platdata->dr_mode) + platdata->dr_mode = of_usb_get_dr_mode(dev->of_node); + + if (platdata->dr_mode == USB_DR_MODE_UNKNOWN) + platdata->dr_mode = USB_DR_MODE_OTG; + + if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) { + /* Get the vbus regulator */ + platdata->reg_vbus = devm_regulator_get(dev, "vbus"); + if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) { + return -EPROBE_DEFER; + } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) { + /* no vbus regualator is needed */ + platdata->reg_vbus = NULL; + } else if (IS_ERR(platdata->reg_vbus)) { + dev_err(dev, "Getting regulator error: %ld\n", + PTR_ERR(platdata->reg_vbus)); + return PTR_ERR(platdata->reg_vbus); + } + } + + if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL) + platdata->flags |= CI_HDRC_FORCE_FULLSPEED; + + return 0; +} + +static DEFINE_IDA(ci_ida); + +struct platform_device *ci_hdrc_add_device(struct device *dev, + struct resource *res, int nres, + struct ci_hdrc_platform_data *platdata) +{ + struct platform_device *pdev; + int id, ret; + + ret = ci_get_platdata(dev, platdata); + if (ret) + return ERR_PTR(ret); + + id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL); + if (id < 0) + return ERR_PTR(id); + + pdev = platform_device_alloc("ci_hdrc", id); + if (!pdev) { + ret = -ENOMEM; + goto put_id; + } + + pdev->dev.parent = dev; + pdev->dev.dma_mask = dev->dma_mask; + pdev->dev.dma_parms = dev->dma_parms; + dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask); + + ret = platform_device_add_resources(pdev, res, nres); + if (ret) + goto err; + + ret = platform_device_add_data(pdev, platdata, sizeof(*platdata)); + if (ret) + goto err; + + ret = platform_device_add(pdev); + if (ret) + goto err; + + return pdev; + +err: + platform_device_put(pdev); +put_id: + ida_simple_remove(&ci_ida, id); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(ci_hdrc_add_device); + +void ci_hdrc_remove_device(struct platform_device *pdev) +{ + int id = pdev->id; + platform_device_unregister(pdev); + ida_simple_remove(&ci_ida, id); +} +EXPORT_SYMBOL_GPL(ci_hdrc_remove_device); + +static inline void ci_role_destroy(struct ci_hdrc *ci) +{ + ci_hdrc_gadget_destroy(ci); + ci_hdrc_host_destroy(ci); + if (ci->is_otg) + ci_hdrc_otg_destroy(ci); +} + +static void ci_get_otg_capable(struct ci_hdrc *ci) +{ + if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG) + ci->is_otg = false; + else + ci->is_otg = (hw_read(ci, CAP_DCCPARAMS, + DCCPARAMS_DC | DCCPARAMS_HC) + == (DCCPARAMS_DC | DCCPARAMS_HC)); + if (ci->is_otg) + dev_dbg(ci->dev, "It is OTG capable controller\n"); +} + +static int ci_hdrc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ci_hdrc *ci; + struct resource *res; + void __iomem *base; + int ret; + enum usb_dr_mode dr_mode; + + if (!dev_get_platdata(dev)) { + dev_err(dev, "platform data missing\n"); + return -ENODEV; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL); + if (!ci) { + dev_err(dev, "can't allocate device\n"); + return -ENOMEM; + } + + ci->dev = dev; + ci->platdata = dev_get_platdata(dev); + ci->imx28_write_fix = !!(ci->platdata->flags & + CI_HDRC_IMX28_WRITE_FIX); + + ret = hw_device_init(ci, base); + if (ret < 0) { + dev_err(dev, "can't initialize hardware\n"); + return -ENODEV; + } + + if (ci->platdata->phy) + ci->transceiver = ci->platdata->phy; + else + ci->transceiver = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + + if (IS_ERR(ci->transceiver)) { + ret = PTR_ERR(ci->transceiver); + /* + * if -ENXIO is returned, it means PHY layer wasn't + * enabled, so it makes no sense to return -EPROBE_DEFER + * in that case, since no PHY driver will ever probe. + */ + if (ret == -ENXIO) + return ret; + + dev_err(dev, "no usb2 phy configured\n"); + return -EPROBE_DEFER; + } + + ret = ci_usb_phy_init(ci); + if (ret) { + dev_err(dev, "unable to init phy: %d\n", ret); + return ret; + } else { + /* + * The delay to sync PHY's status, the maximum delay is + * 2ms since the otgsc uses 1ms timer to debounce the + * PHY's input + */ + usleep_range(2000, 2500); + } + + ci->hw_bank.phys = res->start; + + ci->irq = platform_get_irq(pdev, 0); + if (ci->irq < 0) { + dev_err(dev, "missing IRQ\n"); + ret = ci->irq; + goto deinit_phy; + } + + ci_get_otg_capable(ci); + + dr_mode = ci->platdata->dr_mode; + /* initialize role(s) before the interrupt is requested */ + if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { + ret = ci_hdrc_host_init(ci); + if (ret) + dev_info(dev, "doesn't support host\n"); + } + + if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) { + ret = ci_hdrc_gadget_init(ci); + if (ret) + dev_info(dev, "doesn't support gadget\n"); + } + + if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) { + dev_err(dev, "no supported roles\n"); + ret = -ENODEV; + goto deinit_phy; + } + + if (ci->is_otg) { + /* Disable and clear all OTG irq */ + hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, + OTGSC_INT_STATUS_BITS); + ret = ci_hdrc_otg_init(ci); + if (ret) { + dev_err(dev, "init otg fails, ret = %d\n", ret); + goto stop; + } + } + + if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) { + if (ci->is_otg) { + ci->role = ci_otg_role(ci); + /* Enable ID change irq */ + hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE); + } else { + /* + * If the controller is not OTG capable, but support + * role switch, the defalt role is gadget, and the + * user can switch it through debugfs. + */ + ci->role = CI_ROLE_GADGET; + } + } else { + ci->role = ci->roles[CI_ROLE_HOST] + ? CI_ROLE_HOST + : CI_ROLE_GADGET; + } + + /* only update vbus status for peripheral */ + if (ci->role == CI_ROLE_GADGET) + ci_handle_vbus_change(ci); + + if (!ci_otg_is_fsm_mode(ci)) { + ret = ci_role_start(ci, ci->role); + if (ret) { + dev_err(dev, "can't start %s role\n", + ci_role(ci)->name); + goto stop; + } + } + + platform_set_drvdata(pdev, ci); + ret = request_irq(ci->irq, ci_irq, IRQF_SHARED, ci->platdata->name, + ci); + if (ret) + goto stop; + + if (ci_otg_is_fsm_mode(ci)) + ci_hdrc_otg_fsm_start(ci); + + ret = dbg_create_files(ci); + if (!ret) + return 0; + + free_irq(ci->irq, ci); +stop: + ci_role_destroy(ci); +deinit_phy: + usb_phy_shutdown(ci->transceiver); + + return ret; +} + +static int ci_hdrc_remove(struct platform_device *pdev) +{ + struct ci_hdrc *ci = platform_get_drvdata(pdev); + + dbg_remove_files(ci); + free_irq(ci->irq, ci); + ci_role_destroy(ci); + ci_hdrc_enter_lpm(ci, true); + usb_phy_shutdown(ci->transceiver); + kfree(ci->hw_bank.regmap); + + return 0; +} + +static struct platform_driver ci_hdrc_driver = { + .probe = ci_hdrc_probe, + .remove = ci_hdrc_remove, + .driver = { + .name = "ci_hdrc", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(ci_hdrc_driver); + +MODULE_ALIAS("platform:ci_hdrc"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>"); +MODULE_DESCRIPTION("ChipIdea HDRC Driver"); |