aboutsummaryrefslogtreecommitdiff
path: root/drivers/tty/serial/samsung.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/samsung.c')
-rw-r--r--drivers/tty/serial/samsung.c237
1 files changed, 174 insertions, 63 deletions
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 740458ca62c..c1d3ebdf3b9 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -39,6 +39,7 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/serial_s3c.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
@@ -46,14 +47,35 @@
#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-serial.h>
+#ifdef CONFIG_SAMSUNG_CLOCK
#include <plat/clock.h>
+#endif
#include "samsung.h"
+#if defined(CONFIG_SERIAL_SAMSUNG_DEBUG) && \
+ defined(CONFIG_DEBUG_LL) && \
+ !defined(MODULE)
+
+extern void printascii(const char *);
+
+__printf(1, 2)
+static void dbg(const char *fmt, ...)
+{
+ va_list va;
+ char buff[256];
+
+ va_start(va, fmt);
+ vscnprintf(buff, sizeof(buff), fmt, va);
+ va_end(va);
+
+ printascii(buff);
+}
+
+#else
+#define dbg(fmt, ...) do { if (0) no_printk(fmt, ##__VA_ARGS__); } while (0)
+#endif
+
/* UART name and device definitions */
#define S3C24XX_SERIAL_NAME "ttySAC"
@@ -221,10 +243,12 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
{
struct s3c24xx_uart_port *ourport = dev_id;
struct uart_port *port = &ourport->port;
- struct tty_struct *tty = port->state->port.tty;
unsigned int ufcon, ch, flag, ufstat, uerstat;
+ unsigned long flags;
int max_count = 64;
+ spin_lock_irqsave(&port->lock, flags);
+
while (max_count-- > 0) {
ufcon = rd_regl(port, S3C2410_UFCON);
ufstat = rd_regl(port, S3C2410_UFSTAT);
@@ -248,6 +272,8 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
ufcon |= S3C2410_UFCON_RESETRX;
wr_regl(port, S3C2410_UFCON, ufcon);
rx_enabled(port) = 1;
+ spin_unlock_irqrestore(&port->lock,
+ flags);
goto out;
}
continue;
@@ -296,7 +322,9 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
ignore_char:
continue;
}
- tty_flip_buffer_push(tty);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+ tty_flip_buffer_push(&port->state->port);
out:
return IRQ_HANDLED;
@@ -307,8 +335,11 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
struct s3c24xx_uart_port *ourport = id;
struct uart_port *port = &ourport->port;
struct circ_buf *xmit = &port->state->xmit;
+ unsigned long flags;
int count = 256;
+ spin_lock_irqsave(&port->lock, flags);
+
if (port->x_char) {
wr_regb(port, S3C2410_UTXH, port->x_char);
port->icount.tx++;
@@ -336,13 +367,17 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
port->icount.tx++;
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
+ spin_unlock(&port->lock);
uart_write_wakeup(port);
+ spin_lock(&port->lock);
+ }
if (uart_circ_empty(xmit))
s3c24xx_serial_stop_tx(port);
out:
+ spin_unlock_irqrestore(&port->lock, flags);
return IRQ_HANDLED;
}
@@ -352,10 +387,8 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
struct s3c24xx_uart_port *ourport = id;
struct uart_port *port = &ourport->port;
unsigned int pend = rd_regl(port, S3C64XX_UINTP);
- unsigned long flags;
irqreturn_t ret = IRQ_HANDLED;
- spin_lock_irqsave(&port->lock, flags);
if (pend & S3C64XX_UINTM_RXD_MSK) {
ret = s3c24xx_serial_rx_chars(irq, id);
wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK);
@@ -364,7 +397,6 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
ret = s3c24xx_serial_tx_chars(irq, id);
wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK);
}
- spin_unlock_irqrestore(&port->lock, flags);
return ret;
}
@@ -398,7 +430,14 @@ static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- /* todo - possibly remove AFC and do manual CTS */
+ unsigned int umcon = rd_regl(port, S3C2410_UMCON);
+
+ if (mctrl & TIOCM_RTS)
+ umcon |= S3C2410_UMCOM_RTS_LOW;
+ else
+ umcon &= ~S3C2410_UMCOM_RTS_LOW;
+
+ wr_regl(port, S3C2410_UMCON, umcon);
}
static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
@@ -440,6 +479,8 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
/* Clear pending interrupts and mask all interrupts */
if (s3c24xx_serial_has_interrupt_mask(port)) {
+ free_irq(port->irq, ourport);
+
wr_regl(port, S3C64XX_UINTP, 0xf);
wr_regl(port, S3C64XX_UINTM, 0xf);
}
@@ -450,8 +491,8 @@ static int s3c24xx_serial_startup(struct uart_port *port)
struct s3c24xx_uart_port *ourport = to_ourport(port);
int ret;
- dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
- port->mapbase, port->membase);
+ dbg("s3c24xx_serial_startup: port=%p (%08llx,%p)\n",
+ port, (unsigned long long)port->mapbase, port->membase);
rx_enabled(port) = 1;
@@ -496,8 +537,10 @@ static int s3c64xx_serial_startup(struct uart_port *port)
struct s3c24xx_uart_port *ourport = to_ourport(port);
int ret;
- dbg("s3c64xx_serial_startup: port=%p (%08lx,%p)\n",
- port->mapbase, port->membase);
+ dbg("s3c64xx_serial_startup: port=%p (%08llx,%p)\n",
+ port, (unsigned long long)port->mapbase, port->membase);
+
+ wr_regl(port, S3C64XX_UINTM, 0xf);
ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED,
s3c24xx_serial_portname(port), ourport);
@@ -761,8 +804,6 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
if (termios->c_cflag & CSTOPB)
ulcon |= S3C2410_LCON_STOPB;
- umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
-
if (termios->c_cflag & PARENB) {
if (termios->c_cflag & PARODD)
ulcon |= S3C2410_LCON_PODD;
@@ -779,6 +820,15 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
wr_regl(port, S3C2410_ULCON, ulcon);
wr_regl(port, S3C2410_UBRDIV, quot);
+
+ umcon = rd_regl(port, S3C2410_UMCON);
+ if (termios->c_cflag & CRTSCTS) {
+ umcon |= S3C2410_UMCOM_AFC;
+ /* Disable RTS when RX FIFO contains 63 bytes */
+ umcon &= ~S3C2412_UMCON_AFC_8;
+ } else {
+ umcon &= ~S3C2410_UMCOM_AFC;
+ }
wr_regl(port, S3C2410_UMCON, umcon);
if (ourport->info->has_divslot)
@@ -888,7 +938,7 @@ console_initcall(s3c24xx_serial_console_init);
#define S3C24XX_SERIAL_CONSOLE NULL
#endif
-#ifdef CONFIG_CONSOLE_POLL
+#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
static int s3c24xx_serial_get_poll_char(struct uart_port *port);
static void s3c24xx_serial_put_poll_char(struct uart_port *port,
unsigned char c);
@@ -912,7 +962,7 @@ static struct uart_ops s3c24xx_serial_ops = {
.request_port = s3c24xx_serial_request_port,
.config_port = s3c24xx_serial_config_port,
.verify_port = s3c24xx_serial_verify_port,
-#ifdef CONFIG_CONSOLE_POLL
+#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
.poll_get_char = s3c24xx_serial_get_poll_char,
.poll_put_char = s3c24xx_serial_put_poll_char,
#endif
@@ -998,7 +1048,6 @@ static void s3c24xx_serial_resetport(struct uart_port *port,
ucon &= ucon_mask;
wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
/* reset both fifos */
wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
@@ -1134,10 +1183,15 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
return -EINVAL;
}
- dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
+ dbg("resource %pR)\n", res);
+
+ port->membase = devm_ioremap(port->dev, res->start, resource_size(res));
+ if (!port->membase) {
+ dev_err(port->dev, "failed to remap controller address\n");
+ return -EBUSY;
+ }
port->mapbase = res->start;
- port->membase = S3C_VA_UART + (res->start & 0xfffff);
ret = platform_get_irq(platdev, 0);
if (ret < 0)
port->irq = 0;
@@ -1152,6 +1206,18 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
ourport->tx_irq = ret;
ourport->clk = clk_get(&platdev->dev, "uart");
+ if (IS_ERR(ourport->clk)) {
+ pr_err("%s: Controller clock not found\n",
+ dev_name(&platdev->dev));
+ return PTR_ERR(ourport->clk);
+ }
+
+ ret = clk_prepare_enable(ourport->clk);
+ if (ret) {
+ pr_err("uart: clock failed to prepare+enable: %d\n", ret);
+ clk_put(ourport->clk);
+ return ret;
+ }
/* Keep all interrupts masked and cleared */
if (s3c24xx_serial_has_interrupt_mask(port)) {
@@ -1160,7 +1226,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
wr_regl(port, S3C64XX_UINTSP, 0xf);
}
- dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n",
+ dbg("port: map=%08x, mem=%p, irq=%d (%d,%d), clock=%u\n",
port->mapbase, port->membase, port->irq,
ourport->rx_irq, ourport->tx_irq, port->uartclk);
@@ -1169,6 +1235,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
return 0;
}
+#ifdef CONFIG_SAMSUNG_CLOCK
static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -1184,7 +1251,7 @@ static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
}
static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
-
+#endif
/* Device driver serial port probe */
@@ -1222,8 +1289,8 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
ourport->baudclk = ERR_PTR(-EINVAL);
ourport->info = ourport->drv_data->info;
- ourport->cfg = (pdev->dev.platform_data) ?
- (struct s3c2410_uartcfg *)pdev->dev.platform_data :
+ ourport->cfg = (dev_get_platdata(&pdev->dev)) ?
+ dev_get_platdata(&pdev->dev) :
ourport->drv_data->def_cfg;
ourport->port.fifosize = (ourport->info->fifosize) ?
@@ -1238,13 +1305,30 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
if (ret < 0)
goto probe_err;
+ if (!s3c24xx_uart_drv.state) {
+ ret = uart_register_driver(&s3c24xx_uart_drv);
+ if (ret < 0) {
+ pr_err("Failed to register Samsung UART driver\n");
+ return ret;
+ }
+ }
+
dbg("%s: adding port\n", __func__);
uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
platform_set_drvdata(pdev, &ourport->port);
+ /*
+ * Deactivate the clock enabled in s3c24xx_serial_init_port here,
+ * so that a potential re-enablement through the pm-callback overlaps
+ * and keeps the clock enabled in this case.
+ */
+ clk_disable_unprepare(ourport->clk);
+
+#ifdef CONFIG_SAMSUNG_CLOCK
ret = device_create_file(&pdev->dev, &dev_attr_clock_source);
if (ret < 0)
dev_err(&pdev->dev, "failed to add clock source attr.\n");
+#endif
ret = s3c24xx_serial_cpufreq_register(ourport);
if (ret < 0)
@@ -1256,16 +1340,20 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
return ret;
}
-static int __devexit s3c24xx_serial_remove(struct platform_device *dev)
+static int s3c24xx_serial_remove(struct platform_device *dev)
{
struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
if (port) {
s3c24xx_serial_cpufreq_deregister(to_ourport(port));
+#ifdef CONFIG_SAMSUNG_CLOCK
device_remove_file(&dev->dev, &dev_attr_clock_source);
+#endif
uart_remove_one_port(&s3c24xx_uart_drv, port);
}
+ uart_unregister_driver(&s3c24xx_uart_drv);
+
return 0;
}
@@ -1297,9 +1385,29 @@ static int s3c24xx_serial_resume(struct device *dev)
return 0;
}
+static int s3c24xx_serial_resume_noirq(struct device *dev)
+{
+ struct uart_port *port = s3c24xx_dev_to_port(dev);
+
+ if (port) {
+ /* restore IRQ mask */
+ if (s3c24xx_serial_has_interrupt_mask(port)) {
+ unsigned int uintm = 0xf;
+ if (tx_enabled(port))
+ uintm &= ~S3C64XX_UINTM_TXD_MSK;
+ if (rx_enabled(port))
+ uintm &= ~S3C64XX_UINTM_RXD_MSK;
+ wr_regl(port, S3C64XX_UINTM, uintm);
+ }
+ }
+
+ return 0;
+}
+
static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
.suspend = s3c24xx_serial_suspend,
.resume = s3c24xx_serial_resume,
+ .resume_noirq = s3c24xx_serial_resume_noirq,
};
#define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops)
@@ -1333,6 +1441,13 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
}
+static bool
+s3c24xx_port_configured(unsigned int ucon)
+{
+ /* consider the serial port configured if the tx/rx mode set */
+ return (ucon & 0xf) != 0;
+}
+
#ifdef CONFIG_CONSOLE_POLL
/*
* Console polling routines for writing and reading from the uart while
@@ -1354,11 +1469,16 @@ static int s3c24xx_serial_get_poll_char(struct uart_port *port)
static void s3c24xx_serial_put_poll_char(struct uart_port *port,
unsigned char c)
{
- unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
+ unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
+ unsigned int ucon = rd_regl(port, S3C2410_UCON);
+
+ /* not possible to xmit on unconfigured port */
+ if (!s3c24xx_port_configured(ucon))
+ return;
while (!s3c24xx_serial_console_txrdy(port, ufcon))
cpu_relax();
- wr_regb(cons_uart, S3C2410_UTXH, c);
+ wr_regb(port, S3C2410_UTXH, c);
}
#endif /* CONFIG_CONSOLE_POLL */
@@ -1366,16 +1486,23 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port,
static void
s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
{
- unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
+ unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
+
while (!s3c24xx_serial_console_txrdy(port, ufcon))
- barrier();
- wr_regb(cons_uart, S3C2410_UTXH, ch);
+ cpu_relax();
+ wr_regb(port, S3C2410_UTXH, ch);
}
static void
s3c24xx_serial_console_write(struct console *co, const char *s,
unsigned int count)
{
+ unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
+
+ /* not possible to xmit on unconfigured port */
+ if (!s3c24xx_port_configured(ucon))
+ return;
+
uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
}
@@ -1399,9 +1526,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
"registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
port, ulcon, ucon, ubrdiv);
- if ((ucon & 0xf) != 0) {
- /* consider the serial port configured if the tx/rx mode set */
-
+ if (s3c24xx_port_configured(ucon)) {
switch (ulcon & S3C2410_LCON_CSMASK) {
case S3C2410_LCON_CS5:
*bits = 5;
@@ -1645,8 +1770,7 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
#define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
#endif
-#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) || \
- defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
+#if defined(CONFIG_ARCH_EXYNOS)
static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
.info = &(struct s3c24xx_uart_info) {
.name = "Samsung Exynos4 UART",
@@ -1701,49 +1825,36 @@ MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
#ifdef CONFIG_OF
static const struct of_device_id s3c24xx_uart_dt_match[] = {
+ { .compatible = "samsung,s3c2410-uart",
+ .data = (void *)S3C2410_SERIAL_DRV_DATA },
+ { .compatible = "samsung,s3c2412-uart",
+ .data = (void *)S3C2412_SERIAL_DRV_DATA },
+ { .compatible = "samsung,s3c2440-uart",
+ .data = (void *)S3C2440_SERIAL_DRV_DATA },
+ { .compatible = "samsung,s3c6400-uart",
+ .data = (void *)S3C6400_SERIAL_DRV_DATA },
+ { .compatible = "samsung,s5pv210-uart",
+ .data = (void *)S5PV210_SERIAL_DRV_DATA },
{ .compatible = "samsung,exynos4210-uart",
.data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
{},
};
MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
-#else
-#define s3c24xx_uart_dt_match NULL
#endif
static struct platform_driver samsung_serial_driver = {
.probe = s3c24xx_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
+ .remove = s3c24xx_serial_remove,
.id_table = s3c24xx_serial_driver_ids,
.driver = {
.name = "samsung-uart",
.owner = THIS_MODULE,
.pm = SERIAL_SAMSUNG_PM_OPS,
- .of_match_table = s3c24xx_uart_dt_match,
+ .of_match_table = of_match_ptr(s3c24xx_uart_dt_match),
},
};
-/* module initialisation code */
-
-static int __init s3c24xx_serial_modinit(void)
-{
- int ret;
-
- ret = uart_register_driver(&s3c24xx_uart_drv);
- if (ret < 0) {
- pr_err("Failed to register Samsung UART driver\n");
- return ret;
- }
-
- return platform_driver_register(&samsung_serial_driver);
-}
-
-static void __exit s3c24xx_serial_modexit(void)
-{
- uart_unregister_driver(&s3c24xx_uart_drv);
-}
-
-module_init(s3c24xx_serial_modinit);
-module_exit(s3c24xx_serial_modexit);
+module_platform_driver(samsung_serial_driver);
MODULE_ALIAS("platform:samsung-uart");
MODULE_DESCRIPTION("Samsung SoC Serial port driver");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 14:21:20 +0000