1 files changed, 116 insertions, 47 deletions

diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 5c8e3bba6c8..c638c53cd2b 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -36,6 +36,7 @@
 #include <linux/circ_buf.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
@@ -44,6 +45,8 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 
+#define PXA_NAME_LEN		8
+
 struct uart_pxa_port {
 	struct uart_port        port;
 	unsigned char           ier;
@@ -51,7 +54,7 @@ struct uart_pxa_port {
 	unsigned char           mcr;
 	unsigned int            lsr_break_flag;
 	struct clk		*clk;
-	char			*name;
+	char			name[PXA_NAME_LEN];
 };
 
 static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
@@ -95,7 +98,6 @@ static void serial_pxa_stop_rx(struct uart_port *port)
 
 static inline void receive_chars(struct uart_pxa_port *up, int *status)
 {
-	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned int ch, flag;
 	int max_count = 256;
 
@@ -165,7 +167,7 @@ static inline void receive_chars(struct uart_pxa_port *up, int *status)
 	ignore_char:
 		*status = serial_in(up, UART_LSR);
 	} while ((*status & UART_LSR_DR) && (max_count-- > 0));
-	tty_flip_buffer_push(tty);
+	tty_flip_buffer_push(&up->port.state->port);
 
 	/* work around Errata #20 according to
 	 * Intel(R) PXA27x Processor Family
@@ -330,31 +332,6 @@ static void serial_pxa_break_ctl(struct uart_port *port, int break_state)
 	spin_unlock_irqrestore(&up->port.lock, flags);
 }
 
-#if 0
-static void serial_pxa_dma_init(struct pxa_uart *up)
-{
-	up->rxdma =
-		pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up);
-	if (up->rxdma < 0)
-		goto out;
-	up->txdma =
-		pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up);
-	if (up->txdma < 0)
-		goto err_txdma;
-	up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL);
-	if (!up->dmadesc)
-		goto err_alloc;
-
-	/* ... */
-err_alloc:
-	pxa_free_dma(up->txdma);
-err_rxdma:
-	pxa_free_dma(up->rxdma);
-out:
-	return;
-}
-#endif
-
 static int serial_pxa_startup(struct uart_port *port)
 {
 	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
@@ -515,7 +492,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
 	up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
 	if (termios->c_iflag & INPCK)
 		up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-	if (termios->c_iflag & (BRKINT | PARMRK))
+	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
 		up->port.read_status_mask |= UART_LSR_BI;
 
 	/*
@@ -579,9 +556,9 @@ serial_pxa_pm(struct uart_port *port, unsigned int state,
 	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
 
 	if (!state)
-		clk_enable(up->clk);
+		clk_prepare_enable(up->clk);
 	else
-		clk_disable(up->clk);
+		clk_disable_unprepare(up->clk);
 }
 
 static void serial_pxa_release_port(struct uart_port *port)
@@ -667,8 +644,17 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
 {
 	struct uart_pxa_port *up = serial_pxa_ports[co->index];
 	unsigned int ier;
+	unsigned long flags;
+	int locked = 1;
 
 	clk_enable(up->clk);
+	local_irq_save(flags);
+	if (up->port.sysrq)
+		locked = 0;
+	else if (oops_in_progress)
+		locked = spin_trylock(&up->port.lock);
+	else
+		spin_lock(&up->port.lock);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -685,9 +671,59 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
 	wait_for_xmitr(up);
 	serial_out(up, UART_IER, ier);
 
+	if (locked)
+		spin_unlock(&up->port.lock);
+	local_irq_restore(flags);
 	clk_disable(up->clk);
+
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static int serial_pxa_get_poll_char(struct uart_port *port)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+	unsigned char lsr = serial_in(up, UART_LSR);
+
+	while (!(lsr & UART_LSR_DR))
+		lsr = serial_in(up, UART_LSR);
+
+	return serial_in(up, UART_RX);
 }
 
+
+static void serial_pxa_put_poll_char(struct uart_port *port,
+			 unsigned char c)
+{
+	unsigned int ier;
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+	/*
+	 *	First save the IER then disable the interrupts
+	 */
+	ier = serial_in(up, UART_IER);
+	serial_out(up, UART_IER, UART_IER_UUE);
+
+	wait_for_xmitr(up);
+	/*
+	 *	Send the character out.
+	 */
+	serial_out(up, UART_TX, c);
+
+	/*
+	 *	Finally, wait for transmitter to become empty
+	 *	and restore the IER
+	 */
+	wait_for_xmitr(up);
+	serial_out(up, UART_IER, ier);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
 static int __init
 serial_pxa_console_setup(struct console *co, char *options)
 {
@@ -724,7 +760,7 @@ static struct console serial_pxa_console = {
 #define PXA_CONSOLE	NULL
 #endif
 
-struct uart_ops serial_pxa_pops = {
+static struct uart_ops serial_pxa_pops = {
 	.tx_empty	= serial_pxa_tx_empty,
 	.set_mctrl	= serial_pxa_set_mctrl,
 	.get_mctrl	= serial_pxa_get_mctrl,
@@ -742,6 +778,10 @@ struct uart_ops serial_pxa_pops = {
 	.request_port	= serial_pxa_request_port,
 	.config_port	= serial_pxa_config_port,
 	.verify_port	= serial_pxa_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char = serial_pxa_get_poll_char,
+	.poll_put_char = serial_pxa_put_poll_char,
+#endif
 };
 
 static struct uart_driver serial_pxa_reg = {
@@ -781,6 +821,31 @@ static const struct dev_pm_ops serial_pxa_pm_ops = {
 };
 #endif
 
+static struct of_device_id serial_pxa_dt_ids[] = {
+	{ .compatible = "mrvl,pxa-uart", },
+	{ .compatible = "mrvl,mmp-uart", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids);
+
+static int serial_pxa_probe_dt(struct platform_device *pdev,
+			       struct uart_pxa_port *sport)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (!np)
+		return 1;
+
+	ret = of_alias_get_id(np, "serial");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+		return ret;
+	}
+	sport->port.line = ret;
+	return 0;
+}
+
 static int serial_pxa_probe(struct platform_device *dev)
 {
 	struct uart_pxa_port *sport;
@@ -802,26 +867,28 @@ static int serial_pxa_probe(struct platform_device *dev)
 		goto err_free;
 	}
 
+	ret = clk_prepare(sport->clk);
+	if (ret) {
+		clk_put(sport->clk);
+		goto err_free;
+	}
+
 	sport->port.type = PORT_PXA;
 	sport->port.iotype = UPIO_MEM;
 	sport->port.mapbase = mmres->start;
 	sport->port.irq = irqres->start;
 	sport->port.fifosize = 64;
 	sport->port.ops = &serial_pxa_pops;
-	sport->port.line = dev->id;
 	sport->port.dev = &dev->dev;
 	sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 	sport->port.uartclk = clk_get_rate(sport->clk);
 
-	switch (dev->id) {
-	case 0: sport->name = "FFUART"; break;
-	case 1: sport->name = "BTUART"; break;
-	case 2: sport->name = "STUART"; break;
-	case 3: sport->name = "HWUART"; break;
-	default:
-		sport->name = "???";
-		break;
-	}
+	ret = serial_pxa_probe_dt(dev, sport);
+	if (ret > 0)
+		sport->port.line = dev->id;
+	else if (ret < 0)
+		goto err_clk;
+	snprintf(sport->name, PXA_NAME_LEN - 1, "UART%d", sport->port.line + 1);
 
 	sport->port.membase = ioremap(mmres->start, resource_size(mmres));
 	if (!sport->port.membase) {
@@ -829,7 +896,7 @@ static int serial_pxa_probe(struct platform_device *dev)
 		goto err_clk;
 	}
 
-	serial_pxa_ports[dev->id] = sport;
+	serial_pxa_ports[sport->port.line] = sport;
 
 	uart_add_one_port(&serial_pxa_reg, &sport->port);
 	platform_set_drvdata(dev, sport);
@@ -837,6 +904,7 @@ static int serial_pxa_probe(struct platform_device *dev)
 	return 0;
 
  err_clk:
+	clk_unprepare(sport->clk);
 	clk_put(sport->clk);
  err_free:
 	kfree(sport);
@@ -847,9 +915,9 @@ static int serial_pxa_remove(struct platform_device *dev)
 {
 	struct uart_pxa_port *sport = platform_get_drvdata(dev);
 
-	platform_set_drvdata(dev, NULL);
-
 	uart_remove_one_port(&serial_pxa_reg, &sport->port);
+
+	clk_unprepare(sport->clk);
 	clk_put(sport->clk);
 	kfree(sport);
 
@@ -866,10 +934,11 @@ static struct platform_driver serial_pxa_driver = {
 #ifdef CONFIG_PM
 		.pm	= &serial_pxa_pm_ops,
 #endif
+		.of_match_table = serial_pxa_dt_ids,
 	},
 };
 
-int __init serial_pxa_init(void)
+static int __init serial_pxa_init(void)
 {
 	int ret;
 
@@ -884,7 +953,7 @@ int __init serial_pxa_init(void)
 	return ret;
 }
 
-void __exit serial_pxa_exit(void)
+static void __exit serial_pxa_exit(void)
 {
 	platform_driver_unregister(&serial_pxa_driver);
 	uart_unregister_driver(&serial_pxa_reg);