diff options
Diffstat (limited to 'drivers/tty/serial/of_serial.c')
| -rw-r--r-- | drivers/tty/serial/of_serial.c | 40 |
1 files changed, 31 insertions, 9 deletions
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index e7cae1c2d7d..68d4455f3cf 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -9,20 +9,19 @@ * 2 of the License, or (at your option) any later version. * */ -#include <linux/init.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/serial_core.h> -#include <linux/serial_8250.h> #include <linux/serial_reg.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/of_serial.h> #include <linux/of_platform.h> #include <linux/nwpserial.h> #include <linux/clk.h> +#include "8250/8250.h" + struct of_serial_info { struct clk *clk; int type; @@ -45,8 +44,10 @@ void tegra_serial_handle_break(struct uart_port *p) udelay(1); } while (1); } -/* FIXME remove this export when tegra finishes conversion to open firmware */ -EXPORT_SYMBOL_GPL(tegra_serial_handle_break); +#else +static inline void tegra_serial_handle_break(struct uart_port *port) +{ +} #endif /* @@ -96,6 +97,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev, if (of_property_read_u32(np, "reg-shift", &prop) == 0) port->regshift = prop; + /* Check for fifo size */ + if (of_property_read_u32(np, "fifo-size", &prop) == 0) + port->fifosize = prop; + port->irq = irq_of_parse_and_map(np, 0); port->iotype = UPIO_MEM; if (of_property_read_u32(np, "reg-io-width", &prop) == 0) { @@ -166,11 +171,22 @@ static int of_platform_serial_probe(struct platform_device *ofdev) #ifdef CONFIG_SERIAL_8250 case PORT_8250 ... PORT_MAX_8250: { - /* For now the of bindings don't support the extra - 8250 specific bits */ struct uart_8250_port port8250; memset(&port8250, 0, sizeof(port8250)); + port.type = port_type; port8250.port = port; + + if (port.fifosize) + port8250.capabilities = UART_CAP_FIFO; + + if (of_property_read_bool(ofdev->dev.of_node, + "auto-flow-control")) + port8250.capabilities |= UART_CAP_AFE; + + if (of_property_read_bool(ofdev->dev.of_node, + "has-hw-flow-control")) + port8250.port.flags |= UPF_HARD_FLOW; + ret = serial8250_register_8250_port(&port8250); break; } @@ -192,7 +208,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev) info->type = port_type; info->line = ret; - dev_set_drvdata(&ofdev->dev, info); + platform_set_drvdata(ofdev, info); return 0; out: kfree(info); @@ -205,7 +221,7 @@ out: */ static int of_platform_serial_remove(struct platform_device *ofdev) { - struct of_serial_info *info = dev_get_drvdata(&ofdev->dev); + struct of_serial_info *info = platform_get_drvdata(ofdev); switch (info->type) { #ifdef CONFIG_SERIAL_8250 case PORT_8250 ... PORT_MAX_8250: @@ -240,6 +256,12 @@ static struct of_device_id of_platform_serial_table[] = { { .compatible = "ns16850", .data = (void *)PORT_16850, }, { .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, }, { .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, }, + { .compatible = "altr,16550-FIFO32", + .data = (void *)PORT_ALTR_16550_F32, }, + { .compatible = "altr,16550-FIFO64", + .data = (void *)PORT_ALTR_16550_F64, }, + { .compatible = "altr,16550-FIFO128", + .data = (void *)PORT_ALTR_16550_F128, }, #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL { .compatible = "ibm,qpace-nwp-serial", .data = (void *)PORT_NWPSERIAL, }, |