diff options
Diffstat (limited to 'drivers/tty/serial/mxs-auart.c')
| -rw-r--r-- | drivers/tty/serial/mxs-auart.c | 40 |
1 files changed, 23 insertions, 17 deletions
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index f85b8e6d034..86de4477d98 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -32,7 +32,6 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> -#include <linux/pinctrl/consumer.h> #include <linux/of_device.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> @@ -40,6 +39,7 @@ #include <asm/cacheflush.h> #define MXS_AUART_PORTS 5 +#define MXS_AUART_FIFO_SIZE 16 #define AUART_CTRL0 0x00000000 #define AUART_CTRL0_SET 0x00000004 @@ -134,10 +134,10 @@ enum mxs_auart_type { struct mxs_auart_port { struct uart_port port; -#define MXS_AUART_DMA_CONFIG 0x1 #define MXS_AUART_DMA_ENABLED 0x2 #define MXS_AUART_DMA_TX_SYNC 2 /* bit 2 */ #define MXS_AUART_DMA_RX_READY 3 /* bit 3 */ +#define MXS_AUART_RTSCTS 4 /* bit 4 */ unsigned long flags; unsigned int ctrl; enum mxs_auart_type devtype; @@ -200,7 +200,7 @@ static void dma_tx_callback(void *param) /* clear the bit used to serialize the DMA tx. */ clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); - smp_mb__after_clear_bit(); + smp_mb__after_atomic(); /* wake up the possible processes. */ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) @@ -275,7 +275,7 @@ static void mxs_auart_tx_chars(struct mxs_auart_port *s) mxs_auart_dma_tx(s, i); } else { clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags); - smp_mb__after_clear_bit(); + smp_mb__after_atomic(); } return; } @@ -549,6 +549,9 @@ static int mxs_auart_dma_init(struct mxs_auart_port *s) s->flags |= MXS_AUART_DMA_ENABLED; dev_dbg(s->dev, "enabled the DMA support."); + /* The DMA buffer is now the FIFO the TTY subsystem can use */ + s->port.fifosize = UART_XMIT_SIZE; + return 0; err_out: @@ -601,7 +604,7 @@ static void mxs_auart_settermios(struct uart_port *u, if (termios->c_iflag & INPCK) u->read_status_mask |= AUART_STAT_PERR; - if (termios->c_iflag & (BRKINT | PARMRK)) + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) u->read_status_mask |= AUART_STAT_BERR; /* @@ -640,7 +643,8 @@ static void mxs_auart_settermios(struct uart_port *u, * we can only implement the DMA support for auart * in mx28. */ - if (is_imx28_auart(s) && (s->flags & MXS_AUART_DMA_CONFIG)) { + if (is_imx28_auart(s) + && test_bit(MXS_AUART_RTSCTS, &s->flags)) { if (!mxs_auart_dma_init(s)) /* enable DMA tranfer */ ctrl2 |= AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE @@ -730,9 +734,12 @@ static void mxs_auart_reset(struct uart_port *u) static int mxs_auart_startup(struct uart_port *u) { + int ret; struct mxs_auart_port *s = to_auart_port(u); - clk_prepare_enable(s->clk); + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR); @@ -741,6 +748,9 @@ static int mxs_auart_startup(struct uart_port *u) writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, u->membase + AUART_INTR); + /* Reset FIFO size (it could have changed if DMA was enabled) */ + u->fifosize = MXS_AUART_FIFO_SIZE; + /* * Enable fifo so all four bytes of a DMA word are written to * output (otherwise, only the LSB is written, ie. 1 in 4 bytes) @@ -950,7 +960,9 @@ auart_console_setup(struct console *co, char *options) if (!s) return -ENODEV; - clk_prepare_enable(s->clk); + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -1008,7 +1020,8 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s, } s->port.line = ret; - s->flags |= MXS_AUART_DMA_CONFIG; + if (of_get_property(np, "fsl,uart-has-rtscts", NULL)) + set_bit(MXS_AUART_RTSCTS, &s->flags); return 0; } @@ -1021,7 +1034,6 @@ static int mxs_auart_probe(struct platform_device *pdev) u32 version; int ret = 0; struct resource *r; - struct pinctrl *pinctrl; s = kzalloc(sizeof(struct mxs_auart_port), GFP_KERNEL); if (!s) { @@ -1035,12 +1047,6 @@ static int mxs_auart_probe(struct platform_device *pdev) else if (ret < 0) goto out_free; - pinctrl = devm_pinctrl_get_select_default(&pdev->dev); - if (IS_ERR(pinctrl)) { - ret = PTR_ERR(pinctrl); - goto out_free; - } - if (of_id) { pdev->id_entry = of_id->data; s->devtype = pdev->id_entry->driver_data; @@ -1062,7 +1068,7 @@ static int mxs_auart_probe(struct platform_device *pdev) s->port.membase = ioremap(r->start, resource_size(r)); s->port.ops = &mxs_auart_ops; s->port.iotype = UPIO_MEM; - s->port.fifosize = 16; + s->port.fifosize = MXS_AUART_FIFO_SIZE; s->port.uartclk = clk_get_rate(s->clk); s->port.type = PORT_IMX; s->port.dev = s->dev = &pdev->dev; |