diff options
Diffstat (limited to 'drivers/tty/serial/msm_serial.h')
| -rw-r--r-- | drivers/tty/serial/msm_serial.h | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h new file mode 100644 index 00000000000..d98d45efdf8 --- /dev/null +++ b/drivers/tty/serial/msm_serial.h @@ -0,0 +1,182 @@ +/* + * Copyright (C) 2007 Google, Inc. + * Author: Robert Love <rlove@google.com> + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DRIVERS_SERIAL_MSM_SERIAL_H +#define __DRIVERS_SERIAL_MSM_SERIAL_H + +#define UART_MR1 0x0000 + +#define UART_MR1_AUTO_RFR_LEVEL0 0x3F +#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00 +#define UART_MR1_RX_RDY_CTL (1 << 7) +#define UART_MR1_CTS_CTL (1 << 6) + +#define UART_MR2 0x0004 +#define UART_MR2_ERROR_MODE (1 << 6) +#define UART_MR2_BITS_PER_CHAR 0x30 +#define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4) +#define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4) +#define UART_MR2_BITS_PER_CHAR_7 (0x2 << 4) +#define UART_MR2_BITS_PER_CHAR_8 (0x3 << 4) +#define UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2) +#define UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2) +#define UART_MR2_PARITY_MODE_NONE 0x0 +#define UART_MR2_PARITY_MODE_ODD 0x1 +#define UART_MR2_PARITY_MODE_EVEN 0x2 +#define UART_MR2_PARITY_MODE_SPACE 0x3 +#define UART_MR2_PARITY_MODE 0x3 + +#define UART_CSR 0x0008 + +#define UART_TF 0x000C +#define UARTDM_TF 0x0070 + +#define UART_CR 0x0010 +#define UART_CR_CMD_NULL (0 << 4) +#define UART_CR_CMD_RESET_RX (1 << 4) +#define UART_CR_CMD_RESET_TX (2 << 4) +#define UART_CR_CMD_RESET_ERR (3 << 4) +#define UART_CR_CMD_RESET_BREAK_INT (4 << 4) +#define UART_CR_CMD_START_BREAK (5 << 4) +#define UART_CR_CMD_STOP_BREAK (6 << 4) +#define UART_CR_CMD_RESET_CTS (7 << 4) +#define UART_CR_CMD_RESET_STALE_INT (8 << 4) +#define UART_CR_CMD_PACKET_MODE (9 << 4) +#define UART_CR_CMD_MODE_RESET (12 << 4) +#define UART_CR_CMD_SET_RFR (13 << 4) +#define UART_CR_CMD_RESET_RFR (14 << 4) +#define UART_CR_CMD_PROTECTION_EN (16 << 4) +#define UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4) +#define UART_CR_CMD_FORCE_STALE (4 << 8) +#define UART_CR_CMD_RESET_TX_READY (3 << 8) +#define UART_CR_TX_DISABLE (1 << 3) +#define UART_CR_TX_ENABLE (1 << 2) +#define UART_CR_RX_DISABLE (1 << 1) +#define UART_CR_RX_ENABLE (1 << 0) + +#define UART_IMR 0x0014 +#define UART_IMR_TXLEV (1 << 0) +#define UART_IMR_RXSTALE (1 << 3) +#define UART_IMR_RXLEV (1 << 4) +#define UART_IMR_DELTA_CTS (1 << 5) +#define UART_IMR_CURRENT_CTS (1 << 6) + +#define UART_IPR_RXSTALE_LAST 0x20 +#define UART_IPR_STALE_LSB 0x1F +#define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80 + +#define UART_IPR 0x0018 +#define UART_TFWR 0x001C +#define UART_RFWR 0x0020 +#define UART_HCR 0x0024 + +#define UART_MREG 0x0028 +#define UART_NREG 0x002C +#define UART_DREG 0x0030 +#define UART_MNDREG 0x0034 +#define UART_IRDA 0x0038 +#define UART_MISR_MODE 0x0040 +#define UART_MISR_RESET 0x0044 +#define UART_MISR_EXPORT 0x0048 +#define UART_MISR_VAL 0x004C +#define UART_TEST_CTRL 0x0050 + +#define UART_SR 0x0008 +#define UART_SR_HUNT_CHAR (1 << 7) +#define UART_SR_RX_BREAK (1 << 6) +#define UART_SR_PAR_FRAME_ERR (1 << 5) +#define UART_SR_OVERRUN (1 << 4) +#define UART_SR_TX_EMPTY (1 << 3) +#define UART_SR_TX_READY (1 << 2) +#define UART_SR_RX_FULL (1 << 1) +#define UART_SR_RX_READY (1 << 0) + +#define UART_RF 0x000C +#define UARTDM_RF 0x0070 +#define UART_MISR 0x0010 +#define UART_ISR 0x0014 +#define UART_ISR_TX_READY (1 << 7) + +#define UARTDM_RXFS 0x50 +#define UARTDM_RXFS_BUF_SHIFT 0x7 +#define UARTDM_RXFS_BUF_MASK 0x7 + +#define UARTDM_DMEN 0x3C +#define UARTDM_DMEN_RX_SC_ENABLE BIT(5) +#define UARTDM_DMEN_TX_SC_ENABLE BIT(4) + +#define UARTDM_DMRX 0x34 +#define UARTDM_NCF_TX 0x40 +#define UARTDM_RX_TOTAL_SNAP 0x38 + +#define UART_TO_MSM(uart_port) ((struct msm_port *) uart_port) + +static inline +void msm_write(struct uart_port *port, unsigned int val, unsigned int off) +{ + __raw_writel(val, port->membase + off); +} + +static inline +unsigned int msm_read(struct uart_port *port, unsigned int off) +{ + return __raw_readl(port->membase + off); +} + +/* + * Setup the MND registers to use the TCXO clock. + */ +static inline void msm_serial_set_mnd_regs_tcxo(struct uart_port *port) +{ + msm_write(port, 0x06, UART_MREG); + msm_write(port, 0xF1, UART_NREG); + msm_write(port, 0x0F, UART_DREG); + msm_write(port, 0x1A, UART_MNDREG); + port->uartclk = 1843200; +} + +/* + * Setup the MND registers to use the TCXO clock divided by 4. + */ +static inline void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port) +{ + msm_write(port, 0x18, UART_MREG); + msm_write(port, 0xF6, UART_NREG); + msm_write(port, 0x0F, UART_DREG); + msm_write(port, 0x0A, UART_MNDREG); + port->uartclk = 1843200; +} + +static inline +void msm_serial_set_mnd_regs_from_uartclk(struct uart_port *port) +{ + if (port->uartclk == 19200000) + msm_serial_set_mnd_regs_tcxo(port); + else if (port->uartclk == 4800000) + msm_serial_set_mnd_regs_tcxoby4(port); +} + +/* + * TROUT has a specific defect that makes it report it's uartclk + * as 19.2Mhz (TCXO) when it's actually 4.8Mhz (TCXO/4). This special + * cases TROUT to use the right clock. + */ +#ifdef CONFIG_MACH_TROUT +#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_tcxoby4 +#else +#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_from_uartclk +#endif + +#endif /* __DRIVERS_SERIAL_MSM_SERIAL_H */ |