diff options
Diffstat (limited to 'drivers/tty/serial/men_z135_uart.c')
| -rw-r--r-- | drivers/tty/serial/men_z135_uart.c | 867 |
1 files changed, 867 insertions, 0 deletions
diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c new file mode 100644 index 00000000000..c9d18548783 --- /dev/null +++ b/drivers/tty/serial/men_z135_uart.c @@ -0,0 +1,867 @@ +/* + * MEN 16z135 High Speed UART + * + * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de) + * Author: Johannes Thumshirn <johannes.thumshirn@men.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + */ +#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/serial_core.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/tty_flip.h> +#include <linux/bitops.h> +#include <linux/mcb.h> + +#define MEN_Z135_MAX_PORTS 12 +#define MEN_Z135_BASECLK 29491200 +#define MEN_Z135_FIFO_SIZE 1024 +#define MEN_Z135_NUM_MSI_VECTORS 2 +#define MEN_Z135_FIFO_WATERMARK 1020 + +#define MEN_Z135_STAT_REG 0x0 +#define MEN_Z135_RX_RAM 0x4 +#define MEN_Z135_TX_RAM 0x400 +#define MEN_Z135_RX_CTRL 0x800 +#define MEN_Z135_TX_CTRL 0x804 +#define MEN_Z135_CONF_REG 0x808 +#define MEN_Z135_UART_FREQ 0x80c +#define MEN_Z135_BAUD_REG 0x810 +#define MENZ135_TIMEOUT 0x814 + +#define MEN_Z135_MEM_SIZE 0x818 + +#define IS_IRQ(x) ((x) & 1) +#define IRQ_ID(x) (((x) >> 1) & 7) + +#define MEN_Z135_IER_RXCIEN BIT(0) /* RX Space IRQ */ +#define MEN_Z135_IER_TXCIEN BIT(1) /* TX Space IRQ */ +#define MEN_Z135_IER_RLSIEN BIT(2) /* Receiver Line Status IRQ */ +#define MEN_Z135_IER_MSIEN BIT(3) /* Modem Status IRQ */ +#define MEN_Z135_ALL_IRQS (MEN_Z135_IER_RXCIEN \ + | MEN_Z135_IER_RLSIEN \ + | MEN_Z135_IER_MSIEN \ + | MEN_Z135_IER_TXCIEN) + +#define MEN_Z135_MCR_DTR BIT(24) +#define MEN_Z135_MCR_RTS BIT(25) +#define MEN_Z135_MCR_OUT1 BIT(26) +#define MEN_Z135_MCR_OUT2 BIT(27) +#define MEN_Z135_MCR_LOOP BIT(28) +#define MEN_Z135_MCR_RCFC BIT(29) + +#define MEN_Z135_MSR_DCTS BIT(0) +#define MEN_Z135_MSR_DDSR BIT(1) +#define MEN_Z135_MSR_DRI BIT(2) +#define MEN_Z135_MSR_DDCD BIT(3) +#define MEN_Z135_MSR_CTS BIT(4) +#define MEN_Z135_MSR_DSR BIT(5) +#define MEN_Z135_MSR_RI BIT(6) +#define MEN_Z135_MSR_DCD BIT(7) + +#define MEN_Z135_LCR_SHIFT 8 /* LCR shift mask */ + +#define MEN_Z135_WL5 0 /* CS5 */ +#define MEN_Z135_WL6 1 /* CS6 */ +#define MEN_Z135_WL7 2 /* CS7 */ +#define MEN_Z135_WL8 3 /* CS8 */ + +#define MEN_Z135_STB_SHIFT 2 /* Stopbits */ +#define MEN_Z135_NSTB1 0 +#define MEN_Z135_NSTB2 1 + +#define MEN_Z135_PEN_SHIFT 3 /* Parity enable */ +#define MEN_Z135_PAR_DIS 0 +#define MEN_Z135_PAR_ENA 1 + +#define MEN_Z135_PTY_SHIFT 4 /* Parity type */ +#define MEN_Z135_PTY_ODD 0 +#define MEN_Z135_PTY_EVN 1 + +#define MEN_Z135_LSR_DR BIT(0) +#define MEN_Z135_LSR_OE BIT(1) +#define MEN_Z135_LSR_PE BIT(2) +#define MEN_Z135_LSR_FE BIT(3) +#define MEN_Z135_LSR_BI BIT(4) +#define MEN_Z135_LSR_THEP BIT(5) +#define MEN_Z135_LSR_TEXP BIT(6) +#define MEN_Z135_LSR_RXFIFOERR BIT(7) + +#define MEN_Z135_IRQ_ID_MST 0 +#define MEN_Z135_IRQ_ID_TSA 1 +#define MEN_Z135_IRQ_ID_RDA 2 +#define MEN_Z135_IRQ_ID_RLS 3 +#define MEN_Z135_IRQ_ID_CTI 6 + +#define LCR(x) (((x) >> MEN_Z135_LCR_SHIFT) & 0xff) + +#define BYTES_TO_ALIGN(x) ((x) & 0x3) + +static int line; + +static int txlvl = 5; +module_param(txlvl, int, S_IRUGO); +MODULE_PARM_DESC(txlvl, "TX IRQ trigger level 0-7, default 5 (128 byte)"); + +static int rxlvl = 6; +module_param(rxlvl, int, S_IRUGO); +MODULE_PARM_DESC(rxlvl, "RX IRQ trigger level 0-7, default 6 (256 byte)"); + +static int align; +module_param(align, int, S_IRUGO); +MODULE_PARM_DESC(align, "Keep hardware FIFO write pointer aligned, default 0"); + +struct men_z135_port { + struct uart_port port; + struct mcb_device *mdev; + unsigned char *rxbuf; + u32 stat_reg; + spinlock_t lock; +}; +#define to_men_z135(port) container_of((port), struct men_z135_port, port) + +/** + * men_z135_reg_set() - Set value in register + * @uart: The UART port + * @addr: Register address + * @val: value to set + */ +static inline void men_z135_reg_set(struct men_z135_port *uart, + u32 addr, u32 val) +{ + struct uart_port *port = &uart->port; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&uart->lock, flags); + + reg = ioread32(port->membase + addr); + reg |= val; + iowrite32(reg, port->membase + addr); + + spin_unlock_irqrestore(&uart->lock, flags); +} + +/** + * men_z135_reg_clr() - Unset value in register + * @uart: The UART port + * @addr: Register address + * @val: value to clear + */ +static inline void men_z135_reg_clr(struct men_z135_port *uart, + u32 addr, u32 val) +{ + struct uart_port *port = &uart->port; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&uart->lock, flags); + + reg = ioread32(port->membase + addr); + reg &= ~val; + iowrite32(reg, port->membase + addr); + + spin_unlock_irqrestore(&uart->lock, flags); +} + +/** + * men_z135_handle_modem_status() - Handle change of modem status + * @port: The UART port + * + * Handle change of modem status register. This is done by reading the "delta" + * versions of DCD (Data Carrier Detect) and CTS (Clear To Send). + */ +static void men_z135_handle_modem_status(struct men_z135_port *uart) +{ + if (uart->stat_reg & MEN_Z135_MSR_DDCD) + uart_handle_dcd_change(&uart->port, + uart->stat_reg & ~MEN_Z135_MSR_DCD); + if (uart->stat_reg & MEN_Z135_MSR_DCTS) + uart_handle_cts_change(&uart->port, + uart->stat_reg & ~MEN_Z135_MSR_CTS); +} + +static void men_z135_handle_lsr(struct men_z135_port *uart) +{ + struct uart_port *port = &uart->port; + u8 lsr; + + lsr = (uart->stat_reg >> 16) & 0xff; + + if (lsr & MEN_Z135_LSR_OE) + port->icount.overrun++; + if (lsr & MEN_Z135_LSR_PE) + port->icount.parity++; + if (lsr & MEN_Z135_LSR_FE) + port->icount.frame++; + if (lsr & MEN_Z135_LSR_BI) { + port->icount.brk++; + uart_handle_break(port); + } +} + +/** + * get_rx_fifo_content() - Get the number of bytes in RX FIFO + * @uart: The UART port + * + * Read RXC register from hardware and return current FIFO fill size. + */ +static u16 get_rx_fifo_content(struct men_z135_port *uart) +{ + struct uart_port *port = &uart->port; + u32 stat_reg; + u16 rxc; + u8 rxc_lo; + u8 rxc_hi; + + stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG); + rxc_lo = stat_reg >> 24; + rxc_hi = (stat_reg & 0xC0) >> 6; + + rxc = rxc_lo | (rxc_hi << 8); + + return rxc; +} + +/** + * men_z135_handle_rx() - RX tasklet routine + * @arg: Pointer to struct men_z135_port + * + * Copy from RX FIFO and acknowledge number of bytes copied. + */ +static void men_z135_handle_rx(struct men_z135_port *uart) +{ + struct uart_port *port = &uart->port; + struct tty_port *tport = &port->state->port; + int copied; + u16 size; + int room; + + size = get_rx_fifo_content(uart); + + if (size == 0) + return; + + /* Avoid accidently accessing TX FIFO instead of RX FIFO. Last + * longword in RX FIFO cannot be read.(0x004-0x3FF) + */ + if (size > MEN_Z135_FIFO_WATERMARK) + size = MEN_Z135_FIFO_WATERMARK; + + room = tty_buffer_request_room(tport, size); + if (room != size) + dev_warn(&uart->mdev->dev, + "Not enough room in flip buffer, truncating to %d\n", + room); + + if (room == 0) + return; + + memcpy_fromio(uart->rxbuf, port->membase + MEN_Z135_RX_RAM, room); + /* Be sure to first copy all data and then acknowledge it */ + mb(); + iowrite32(room, port->membase + MEN_Z135_RX_CTRL); + + copied = tty_insert_flip_string(tport, uart->rxbuf, room); + if (copied != room) + dev_warn(&uart->mdev->dev, + "Only copied %d instead of %d bytes\n", + copied, room); + + port->icount.rx += copied; + + tty_flip_buffer_push(tport); + +} + +/** + * men_z135_handle_tx() - TX tasklet routine + * @arg: Pointer to struct men_z135_port + * + */ +static void men_z135_handle_tx(struct men_z135_port *uart) +{ + struct uart_port *port = &uart->port; + struct circ_buf *xmit = &port->state->xmit; + u32 txc; + u32 wptr; + int qlen; + int n; + int txfree; + int head; + int tail; + int s; + + if (uart_circ_empty(xmit)) + goto out; + + if (uart_tx_stopped(port)) + goto out; + + if (port->x_char) + goto out; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + /* calculate bytes to copy */ + qlen = uart_circ_chars_pending(xmit); + if (qlen <= 0) + goto out; + + wptr = ioread32(port->membase + MEN_Z135_TX_CTRL); + txc = (wptr >> 16) & 0x3ff; + wptr &= 0x3ff; + + if (txc > MEN_Z135_FIFO_WATERMARK) + txc = MEN_Z135_FIFO_WATERMARK; + + txfree = MEN_Z135_FIFO_WATERMARK - txc; + if (txfree <= 0) { + pr_err("Not enough room in TX FIFO have %d, need %d\n", + txfree, qlen); + goto irq_en; + } + + /* if we're not aligned, it's better to copy only 1 or 2 bytes and + * then the rest. + */ + if (align && qlen >= 3 && BYTES_TO_ALIGN(wptr)) + n = 4 - BYTES_TO_ALIGN(wptr); + else if (qlen > txfree) + n = txfree; + else + n = qlen; + + if (n <= 0) + goto irq_en; + + head = xmit->head & (UART_XMIT_SIZE - 1); + tail = xmit->tail & (UART_XMIT_SIZE - 1); + + s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail; + n = min(n, s); + + memcpy_toio(port->membase + MEN_Z135_TX_RAM, &xmit->buf[xmit->tail], n); + xmit->tail = (xmit->tail + n) & (UART_XMIT_SIZE - 1); + mmiowb(); + + iowrite32(n & 0x3ff, port->membase + MEN_Z135_TX_CTRL); + + port->icount.tx += n; + +irq_en: + if (!uart_circ_empty(xmit)) + men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN); + else + men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN); + +out: + return; + +} + +/** + * men_z135_intr() - Handle legacy IRQs + * @irq: The IRQ number + * @data: Pointer to UART port + * + * Check IIR register to see which tasklet to start. + */ +static irqreturn_t men_z135_intr(int irq, void *data) +{ + struct men_z135_port *uart = (struct men_z135_port *)data; + struct uart_port *port = &uart->port; + int irq_id; + + uart->stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG); + /* IRQ pending is low active */ + if (IS_IRQ(uart->stat_reg)) + return IRQ_NONE; + + irq_id = IRQ_ID(uart->stat_reg); + switch (irq_id) { + case MEN_Z135_IRQ_ID_MST: + men_z135_handle_modem_status(uart); + break; + case MEN_Z135_IRQ_ID_TSA: + men_z135_handle_tx(uart); + break; + case MEN_Z135_IRQ_ID_CTI: + dev_dbg(&uart->mdev->dev, "Character Timeout Indication\n"); + /* Fallthrough */ + case MEN_Z135_IRQ_ID_RDA: + /* Reading data clears RX IRQ */ + men_z135_handle_rx(uart); + break; + case MEN_Z135_IRQ_ID_RLS: + men_z135_handle_lsr(uart); + break; + default: + dev_warn(&uart->mdev->dev, "Unknown IRQ id %d\n", irq_id); + return IRQ_NONE; + } + + return IRQ_HANDLED; +} + +/** + * men_z135_request_irq() - Request IRQ for 16z135 core + * @uart: z135 private uart port structure + * + * Request an IRQ for 16z135 to use. First try using MSI, if it fails + * fall back to using legacy interrupts. + */ +static int men_z135_request_irq(struct men_z135_port *uart) +{ + struct device *dev = &uart->mdev->dev; + struct uart_port *port = &uart->port; + int err = 0; + + err = request_irq(port->irq, men_z135_intr, IRQF_SHARED, + "men_z135_intr", uart); + if (err) + dev_err(dev, "Error %d getting interrupt\n", err); + + return err; +} + +/** + * men_z135_tx_empty() - Handle tx_empty call + * @port: The UART port + * + * This function tests whether the TX FIFO and shifter for the port + * described by @port is empty. + */ +static unsigned int men_z135_tx_empty(struct uart_port *port) +{ + u32 wptr; + u16 txc; + + wptr = ioread32(port->membase + MEN_Z135_TX_CTRL); + txc = (wptr >> 16) & 0x3ff; + + if (txc == 0) + return TIOCSER_TEMT; + else + return 0; +} + +/** + * men_z135_set_mctrl() - Set modem control lines + * @port: The UART port + * @mctrl: The modem control lines + * + * This function sets the modem control lines for a port described by @port + * to the state described by @mctrl + */ +static void men_z135_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct men_z135_port *uart = to_men_z135(port); + u32 conf_reg = 0; + + if (mctrl & TIOCM_RTS) + conf_reg |= MEN_Z135_MCR_RTS; + if (mctrl & TIOCM_DTR) + conf_reg |= MEN_Z135_MCR_DTR; + if (mctrl & TIOCM_OUT1) + conf_reg |= MEN_Z135_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + conf_reg |= MEN_Z135_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + conf_reg |= MEN_Z135_MCR_LOOP; + + men_z135_reg_set(uart, MEN_Z135_CONF_REG, conf_reg); +} + +/** + * men_z135_get_mctrl() - Get modem control lines + * @port: The UART port + * + * Retruns the current state of modem control inputs. + */ +static unsigned int men_z135_get_mctrl(struct uart_port *port) +{ + unsigned int mctrl = 0; + u32 stat_reg; + u8 msr; + + stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG); + + msr = ~((stat_reg >> 8) & 0xff); + + if (msr & MEN_Z135_MSR_CTS) + mctrl |= TIOCM_CTS; + if (msr & MEN_Z135_MSR_DSR) + mctrl |= TIOCM_DSR; + if (msr & MEN_Z135_MSR_RI) + mctrl |= TIOCM_RI; + if (msr & MEN_Z135_MSR_DCD) + mctrl |= TIOCM_CAR; + + return mctrl; +} + +/** + * men_z135_stop_tx() - Stop transmitting characters + * @port: The UART port + * + * Stop transmitting characters. This might be due to CTS line becomming + * inactive or the tty layer indicating we want to stop transmission due to + * an XOFF character. + */ +static void men_z135_stop_tx(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN); +} + +/** + * men_z135_start_tx() - Start transmitting characters + * @port: The UART port + * + * Start transmitting character. This actually doesn't transmit anything, but + * fires off the TX tasklet. + */ +static void men_z135_start_tx(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + men_z135_handle_tx(uart); +} + +/** + * men_z135_stop_rx() - Stop receiving characters + * @port: The UART port + * + * Stop receiving characters; the port is in the process of being closed. + */ +static void men_z135_stop_rx(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_RXCIEN); +} + +/** + * men_z135_enable_ms() - Enable Modem Status + * port: + * + * Enable Modem Status IRQ. + */ +static void men_z135_enable_ms(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + + men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN); +} + +static int men_z135_startup(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + int err; + u32 conf_reg = 0; + + err = men_z135_request_irq(uart); + if (err) + return -ENODEV; + + conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG); + + /* Activate all but TX space available IRQ */ + conf_reg |= MEN_Z135_ALL_IRQS & ~MEN_Z135_IER_TXCIEN; + conf_reg &= ~(0xff << 16); + conf_reg |= (txlvl << 16); + conf_reg |= (rxlvl << 20); + + iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG); + + return 0; +} + +static void men_z135_shutdown(struct uart_port *port) +{ + struct men_z135_port *uart = to_men_z135(port); + u32 conf_reg = 0; + + conf_reg |= MEN_Z135_ALL_IRQS; + + men_z135_reg_clr(uart, MEN_Z135_CONF_REG, conf_reg); + + free_irq(uart->port.irq, uart); +} + +static void men_z135_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud; + u32 conf_reg; + u32 bd_reg; + u32 uart_freq; + u8 lcr; + + conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG); + lcr = LCR(conf_reg); + + /* byte size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr |= MEN_Z135_WL5; + break; + case CS6: + lcr |= MEN_Z135_WL6; + break; + case CS7: + lcr |= MEN_Z135_WL7; + break; + case CS8: + lcr |= MEN_Z135_WL8; + break; + } + + /* stop bits */ + if (termios->c_cflag & CSTOPB) + lcr |= MEN_Z135_NSTB2 << MEN_Z135_STB_SHIFT; + + /* parity */ + if (termios->c_cflag & PARENB) { + lcr |= MEN_Z135_PAR_ENA << MEN_Z135_PEN_SHIFT; + + if (termios->c_cflag & PARODD) + lcr |= MEN_Z135_PTY_ODD << MEN_Z135_PTY_SHIFT; + else + lcr |= MEN_Z135_PTY_EVN << MEN_Z135_PTY_SHIFT; + } else + lcr |= MEN_Z135_PAR_DIS << MEN_Z135_PEN_SHIFT; + + termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ + + conf_reg |= lcr << MEN_Z135_LCR_SHIFT; + iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG); + + uart_freq = ioread32(port->membase + MEN_Z135_UART_FREQ); + if (uart_freq == 0) + uart_freq = MEN_Z135_BASECLK; + + baud = uart_get_baud_rate(port, termios, old, 0, uart_freq / 16); + + spin_lock(&port->lock); + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + bd_reg = uart_freq / (4 * baud); + iowrite32(bd_reg, port->membase + MEN_Z135_BAUD_REG); + + uart_update_timeout(port, termios->c_cflag, baud); + spin_unlock(&port->lock); +} + +static const char *men_z135_type(struct uart_port *port) +{ + return KBUILD_MODNAME; +} + +static void men_z135_release_port(struct uart_port *port) +{ + iounmap(port->membase); + port->membase = NULL; + + release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE); +} + +static int men_z135_request_port(struct uart_port *port) +{ + int size = MEN_Z135_MEM_SIZE; + + if (!request_mem_region(port->mapbase, size, "men_z135_port")) + return -EBUSY; + + port->membase = ioremap(port->mapbase, MEN_Z135_MEM_SIZE); + if (port->membase == NULL) { + release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE); + return -ENOMEM; + } + + return 0; +} + +static void men_z135_config_port(struct uart_port *port, int type) +{ + port->type = PORT_MEN_Z135; + men_z135_request_port(port); +} + +static int men_z135_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + return -EINVAL; +} + +static struct uart_ops men_z135_ops = { + .tx_empty = men_z135_tx_empty, + .set_mctrl = men_z135_set_mctrl, + .get_mctrl = men_z135_get_mctrl, + .stop_tx = men_z135_stop_tx, + .start_tx = men_z135_start_tx, + .stop_rx = men_z135_stop_rx, + .enable_ms = men_z135_enable_ms, + .startup = men_z135_startup, + .shutdown = men_z135_shutdown, + .set_termios = men_z135_set_termios, + .type = men_z135_type, + .release_port = men_z135_release_port, + .request_port = men_z135_request_port, + .config_port = men_z135_config_port, + .verify_port = men_z135_verify_port, +}; + +static struct uart_driver men_z135_driver = { + .owner = THIS_MODULE, + .driver_name = KBUILD_MODNAME, + .dev_name = "ttyHSU", + .major = 0, + .minor = 0, + .nr = MEN_Z135_MAX_PORTS, +}; + +/** + * men_z135_probe() - Probe a z135 instance + * @mdev: The MCB device + * @id: The MCB device ID + * + * men_z135_probe does the basic setup of hardware resources and registers the + * new uart port to the tty layer. + */ +static int men_z135_probe(struct mcb_device *mdev, + const struct mcb_device_id *id) +{ + struct men_z135_port *uart; + struct resource *mem; + struct device *dev; + int err; + + dev = &mdev->dev; + + uart = devm_kzalloc(dev, sizeof(struct men_z135_port), GFP_KERNEL); + if (!uart) + return -ENOMEM; + + uart->rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL); + if (!uart->rxbuf) + return -ENOMEM; + + mem = &mdev->mem; + + mcb_set_drvdata(mdev, uart); + + uart->port.uartclk = MEN_Z135_BASECLK * 16; + uart->port.fifosize = MEN_Z135_FIFO_SIZE; + uart->port.iotype = UPIO_MEM; + uart->port.ops = &men_z135_ops; + uart->port.irq = mcb_get_irq(mdev); + uart->port.iotype = UPIO_MEM; + uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + uart->port.line = line++; + uart->port.dev = dev; + uart->port.type = PORT_MEN_Z135; + uart->port.mapbase = mem->start; + uart->port.membase = NULL; + uart->mdev = mdev; + + spin_lock_init(&uart->port.lock); + spin_lock_init(&uart->lock); + + err = uart_add_one_port(&men_z135_driver, &uart->port); + if (err) + goto err; + + return 0; + +err: + free_page((unsigned long) uart->rxbuf); + dev_err(dev, "Failed to add UART: %d\n", err); + + return err; +} + +/** + * men_z135_remove() - Remove a z135 instance from the system + * + * @mdev: The MCB device + */ +static void men_z135_remove(struct mcb_device *mdev) +{ + struct men_z135_port *uart = mcb_get_drvdata(mdev); + + line--; + uart_remove_one_port(&men_z135_driver, &uart->port); + free_page((unsigned long) uart->rxbuf); +} + +static const struct mcb_device_id men_z135_ids[] = { + { .device = 0x87 }, +}; +MODULE_DEVICE_TABLE(mcb, men_z135_ids); + +static struct mcb_driver mcb_driver = { + .driver = { + .name = "z135-uart", + .owner = THIS_MODULE, + }, + .probe = men_z135_probe, + .remove = men_z135_remove, + .id_table = men_z135_ids, +}; + +/** + * men_z135_init() - Driver Registration Routine + * + * men_z135_init is the first routine called when the driver is loaded. All it + * does is register with the legacy MEN Chameleon subsystem. + */ +static int __init men_z135_init(void) +{ + int err; + + err = uart_register_driver(&men_z135_driver); + if (err) { + pr_err("Failed to register UART: %d\n", err); + return err; + } + + err = mcb_register_driver(&mcb_driver); + if (err) { + pr_err("Failed to register MCB driver: %d\n", err); + uart_unregister_driver(&men_z135_driver); + return err; + } + + return 0; +} +module_init(men_z135_init); + +/** + * men_z135_exit() - Driver Exit Routine + * + * men_z135_exit is called just before the driver is removed from memory. + */ +static void __exit men_z135_exit(void) +{ + mcb_unregister_driver(&mcb_driver); + uart_unregister_driver(&men_z135_driver); +} +module_exit(men_z135_exit); + +MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@men.de>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MEN 16z135 High Speed UART"); +MODULE_ALIAS("mcb:16z135"); |