diff options
Diffstat (limited to 'drivers/tty/serial/ioc4_serial.c')
| -rw-r--r-- | drivers/tty/serial/ioc4_serial.c | 25 |
1 files changed, 11 insertions, 14 deletions
diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c index 6b36c1554d7..1274499850f 100644 --- a/drivers/tty/serial/ioc4_serial.c +++ b/drivers/tty/serial/ioc4_serial.c @@ -16,7 +16,6 @@ #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/serial.h> -#include <linux/serialP.h> #include <linux/circ_buf.h> #include <linux/serial_reg.h> #include <linux/module.h> @@ -298,7 +297,7 @@ struct ioc4_serial { struct ioc4_uartregs uart_1; struct ioc4_uartregs uart_2; struct ioc4_uartregs uart_3; -} ioc4_serial; +}; /* UART clock speed */ #define IOC4_SER_XIN_CLK_66 66666667 @@ -975,7 +974,7 @@ intr_connect(struct ioc4_soft *soft, int type, BUG_ON(!((type == IOC4_SIO_INTR_TYPE) || (type == IOC4_OTHER_INTR_TYPE))); - i = atomic_inc(&soft-> is_intr_type[type].is_num_intrs) - 1; + i = atomic_inc_return(&soft-> is_intr_type[type].is_num_intrs) - 1; BUG_ON(!(i < MAX_IOC4_INTR_ENTS || (printk("i %d\n", i), 0))); /* Save off the lower level interrupt handler */ @@ -1741,7 +1740,7 @@ ioc4_change_speed(struct uart_port *the_port, the_port->ignore_status_mask = N_ALL_INPUT; - state->port.tty->low_latency = 1; + state->port.low_latency = 1; if (iflag & IGNPAR) the_port->ignore_status_mask &= ~(N_PARITY_ERROR @@ -1804,7 +1803,7 @@ static inline int ic4_startup_local(struct uart_port *the_port) ioc4_set_proto(port, the_port->mapbase); /* set the speed of the serial port */ - ioc4_change_speed(the_port, state->port.tty->termios, + ioc4_change_speed(the_port, &state->port.tty->termios, (struct ktermios *)0); return 0; @@ -2070,13 +2069,14 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf, struct ioc4_port *port = get_ioc4_port(the_port, 0); struct ring *inring; struct ring_entry *entry; - struct hooks *hooks = port->ip_hooks; + struct hooks *hooks; int byte_num; char *sc; int loop_counter; BUG_ON(!(len >= 0)); BUG_ON(!port); + hooks = port->ip_hooks; /* There is a nasty timing issue in the IOC4. When the rx_timer * expires or the rx_high condition arises, we take an interrupt. @@ -2340,7 +2340,6 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf, */ static void receive_chars(struct uart_port *the_port) { - struct tty_struct *tty; unsigned char ch[IOC4_MAX_CHARS]; int read_count, request_count = IOC4_MAX_CHARS; struct uart_icount *icount; @@ -2350,26 +2349,23 @@ static void receive_chars(struct uart_port *the_port) /* Make sure all the pointers are "good" ones */ if (!state) return; - if (!state->port.tty) - return; spin_lock_irqsave(&the_port->lock, pflags); - tty = state->port.tty; - request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS); + request_count = tty_buffer_request_room(&state->port, IOC4_MAX_CHARS); if (request_count > 0) { icount = &the_port->icount; read_count = do_read(the_port, ch, request_count); if (read_count > 0) { - tty_insert_flip_string(tty, ch, read_count); + tty_insert_flip_string(&state->port, ch, read_count); icount->rx += read_count; } } spin_unlock_irqrestore(&the_port->lock, pflags); - tty_flip_buffer_push(tty); + tty_flip_buffer_push(&state->port); } /** @@ -2771,7 +2767,7 @@ ioc4_serial_core_attach(struct pci_dev *pdev, int port_type) * called per card found from IOC4 master module. * @idd: Master module data for this IOC4 */ -int +static int ioc4_serial_attach_one(struct ioc4_driver_data *idd) { unsigned long tmp_addr1; @@ -2883,6 +2879,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) /* error exits that give back resources */ out5: ioc4_serial_remove_one(idd); + return ret; out4: kfree(soft); out3: |