aboutsummaryrefslogtreecommitdiff
path: root/drivers/tty/serial/bfin_uart.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/bfin_uart.c')
-rw-r--r--drivers/tty/serial/bfin_uart.c67
1 files changed, 17 insertions, 50 deletions
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 2e2b2c1cb72..ac86a20992e 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -41,10 +41,6 @@
# undef CONFIG_EARLY_PRINTK
#endif
-#ifdef CONFIG_SERIAL_BFIN_MODULE
-# undef CONFIG_EARLY_PRINTK
-#endif
-
/* UART name and device definitions */
#define BFIN_SERIAL_DEV_NAME "ttyBF"
#define BFIN_SERIAL_MAJOR 204
@@ -223,7 +219,6 @@ static void bfin_serial_enable_ms(struct uart_port *port)
#ifdef CONFIG_SERIAL_BFIN_PIO
static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
{
- struct tty_struct *tty = NULL;
unsigned int status, ch, flg;
static struct timeval anomaly_start = { .tv_sec = 0 };
@@ -242,11 +237,9 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
return;
}
- if (!uart->port.state || !uart->port.state->port.tty)
+ if (!uart->port.state)
return;
#endif
- tty = uart->port.state->port.tty;
-
if (ANOMALY_05000363) {
/* The BF533 (and BF561) family of processors have a nice anomaly
* where they continuously generate characters for a "single" break.
@@ -325,7 +318,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
uart_insert_char(&uart->port, status, OE, ch, flg);
ignore_char:
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&uart->port.state->port);
}
static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
@@ -426,7 +419,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
{
- struct tty_struct *tty = uart->port.state->port.tty;
int i, flg, status;
status = UART_GET_LSR(uart);
@@ -471,7 +463,7 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
}
dma_ignore_char:
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&uart->port.state->port);
}
void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
@@ -688,7 +680,7 @@ static int bfin_serial_startup(struct uart_port *port)
default:
uart_dma_ch_rx = uart_dma_ch_tx = 0;
break;
- };
+ }
if (uart_dma_ch_rx &&
request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
@@ -734,7 +726,7 @@ static int bfin_serial_startup(struct uart_port *port)
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
if (uart->cts_pin >= 0) {
if (request_irq(uart->status_irq, bfin_serial_mctrl_cts_int,
- IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
+ 0, "BFIN_UART_MODEM_STATUS", uart)) {
uart->cts_pin = -1;
dev_info(port->dev, "Unable to attach BlackFin UART Modem Status interrupt.\n");
}
@@ -773,7 +765,7 @@ static void bfin_serial_shutdown(struct uart_port *port)
break;
default:
break;
- };
+ }
#endif
free_irq(uart->rx_irq, uart);
free_irq(uart->tx_irq, uart);
@@ -841,7 +833,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
port->read_status_mask = OE;
if (termios->c_iflag & INPCK)
port->read_status_mask |= (FE | PE);
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= BI;
/*
@@ -1015,24 +1007,6 @@ static int bfin_serial_poll_get_char(struct uart_port *port)
}
#endif
-#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
- defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
-static void bfin_kgdboc_port_shutdown(struct uart_port *port)
-{
- if (kgdboc_break_enabled) {
- kgdboc_break_enabled = 0;
- bfin_serial_shutdown(port);
- }
-}
-
-static int bfin_kgdboc_port_startup(struct uart_port *port)
-{
- kgdboc_port_line = port->line;
- kgdboc_break_enabled = !bfin_serial_startup(port);
- return 0;
-}
-#endif
-
static struct uart_ops bfin_serial_pops = {
.tx_empty = bfin_serial_tx_empty,
.set_mctrl = bfin_serial_set_mctrl,
@@ -1051,11 +1025,6 @@ static struct uart_ops bfin_serial_pops = {
.request_port = bfin_serial_request_port,
.config_port = bfin_serial_config_port,
.verify_port = bfin_serial_verify_port,
-#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
- defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
- .kgdboc_port_startup = bfin_kgdboc_port_startup,
- .kgdboc_port_shutdown = bfin_kgdboc_port_shutdown,
-#endif
#ifdef CONFIG_CONSOLE_POLL
.poll_put_char = bfin_serial_poll_put_char,
.poll_get_char = bfin_serial_poll_get_char,
@@ -1207,7 +1176,7 @@ bfin_earlyprintk_console_write(struct console *co, const char *s, unsigned int c
* don't let the common infrastructure play with things. (see calls to setup
* & earlysetup in ./kernel/printk.c:register_console()
*/
-static struct __initdata console bfin_early_serial_console = {
+static struct console bfin_early_serial_console __initdata = {
.name = "early_BFuart",
.write = bfin_earlyprintk_console_write,
.device = uart_console_device,
@@ -1271,7 +1240,8 @@ static int bfin_serial_probe(struct platform_device *pdev)
*/
#endif
ret = peripheral_request_list(
- (unsigned short *)pdev->dev.platform_data, DRIVER_NAME);
+ dev_get_platdata(&pdev->dev),
+ DRIVER_NAME);
if (ret) {
dev_err(&pdev->dev,
"fail to request bfin serial peripherals\n");
@@ -1388,8 +1358,7 @@ static int bfin_serial_probe(struct platform_device *pdev)
out_error_unmap:
iounmap(uart->port.membase);
out_error_free_peripherals:
- peripheral_free_list(
- (unsigned short *)pdev->dev.platform_data);
+ peripheral_free_list(dev_get_platdata(&pdev->dev));
out_error_free_mem:
kfree(uart);
bfin_serial_ports[pdev->id] = NULL;
@@ -1407,8 +1376,7 @@ static int bfin_serial_remove(struct platform_device *pdev)
if (uart) {
uart_remove_one_port(&bfin_serial_reg, &uart->port);
iounmap(uart->port.membase);
- peripheral_free_list(
- (unsigned short *)pdev->dev.platform_data);
+ peripheral_free_list(dev_get_platdata(&pdev->dev));
kfree(uart);
bfin_serial_ports[pdev->id] = NULL;
}
@@ -1428,7 +1396,7 @@ static struct platform_driver bfin_serial_driver = {
};
#if defined(CONFIG_SERIAL_BFIN_CONSOLE)
-static __initdata struct early_platform_driver early_bfin_serial_driver = {
+static struct early_platform_driver early_bfin_serial_driver __initdata = {
.class_str = CLASS_BFIN_CONSOLE,
.pdrv = &bfin_serial_driver,
.requested_id = EARLY_PLATFORM_ID_UNSET,
@@ -1462,8 +1430,8 @@ static int bfin_earlyprintk_probe(struct platform_device *pdev)
return -ENOENT;
}
- ret = peripheral_request_list(
- (unsigned short *)pdev->dev.platform_data, DRIVER_NAME);
+ ret = peripheral_request_list(dev_get_platdata(&pdev->dev),
+ DRIVER_NAME);
if (ret) {
dev_err(&pdev->dev,
"fail to request bfin serial peripherals\n");
@@ -1493,8 +1461,7 @@ static int bfin_earlyprintk_probe(struct platform_device *pdev)
return 0;
out_error_free_peripherals:
- peripheral_free_list(
- (unsigned short *)pdev->dev.platform_data);
+ peripheral_free_list(dev_get_platdata(&pdev->dev));
return ret;
}
@@ -1507,7 +1474,7 @@ static struct platform_driver bfin_earlyprintk_driver = {
},
};
-static __initdata struct early_platform_driver early_bfin_earlyprintk_driver = {
+static struct early_platform_driver early_bfin_earlyprintk_driver __initdata = {
.class_str = CLASS_BFIN_EARLYPRINTK,
.pdrv = &bfin_earlyprintk_driver,
.requested_id = EARLY_PLATFORM_ID_UNSET,
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 10:24:43 +0000